14N = 3.5 kg × 4 m/sec²
What process would I need to get answer 14N?

The time constant (Ï) for a circuit with resistance R and capacitance C is given by the equation Ï = R*C. In this case, R=1.0 kΩ and C=1.0 μF.

Converting the units to SI units (ohms and farads), we get R=1000 ohms and C=1.0*10^-6 farads. Substituting these values into the equation, we get Ï = 1000 ohms * 1.0*10^-6 farads = 1.0 millisecond (ms) or 0.001 seconds (s). Therefore, the time constant for this circuit is 0.001 s.

To know more about constant please vist :-

https://brainly.com/question/9350045

#SPJ11

According to Table 300-19(A) in the National Electrical Code (NEC), a 100 foot vertical run of No. 4/0 copper conductors requires the conductors to be supported at a minimum of 7 locations.

At least seven support locations are required for a 100 foot vertical run of No. 4/0 copper. The support locations should be spaced no more than 20 feet apart and should be supported with a combination of rigid metal conduit (RMC), intermediate metal conduit (IMC), conduit bodies, or cable trays. In addition, the support locations must be able to support the weight of the conductors as well as any environmental factors, such as wind loading, that could affect the support structure.

To learn more about conductors click here https://brainly.com/question/13495387

#SPJ11

The chemical that makes up genetic material is called nucleic acid. Specifically, DNA deoxyribonucleic acid and RNA ribonucleic acid are the two types of nucleic acids that store and transmit genetic information in living organisms.

Acids are substances that have a pH less than 7 and can donate a hydrogen ion (H+) to a solution. They are characterized by their sour taste and their ability to dissolve metals, react with bases, and change the color of indicators. Acids can be categorized as strong or weak based on their ability to ionize in water. Strong acids ionize completely in water, while weak acids only partially ionize.

Ionization refers to the process of converting a neutral atom or molecule into an ion by adding or removing one or more electrons. This can occur through a variety of methods, such as heating, chemical reactions, or exposure to radiation. When an atom loses one or more electrons, it becomes positively charged and is called a cation.

To know more about ionize visit :

https://brainly.com/question/28385102

#SPJ1

The new orbital speed after friction from the Earth's upper atmosphere has done -7.5x[tex]10^{9}[/tex] J of work on the satellite is approximately 7489 m/s.

We can use the work-energy principle to solve this problem. The work done by the atmosphere is equal to the change in kinetic energy of the satellite

W = ΔK

Where W is the work done by the atmosphere and ΔK is the change in kinetic energy. We can find the initial kinetic energy of the satellite using the formula

K = (1/2)m[tex]V^{2}[/tex]

Where m is the mass of the satellite and V is its initial velocity.

Since the problem does not provide the mass of the satellite, we can assume it is constant and cancel it out in the equations. Thus, we can write

W = ΔK = (1/2)m[tex]Vf^{2}[/tex] - (1/2) m[tex]Vi^{2}[/tex]

Where Vf is the final velocity of the satellite and Vi is its initial velocity.

Substituting the given values, we have

-7.5x[tex]10^{9}[/tex] J = (1/2)m[tex]Vf^{2}[/tex] - (1/2) m[tex]Vi^{2}[/tex]

We also know that the initial orbital speed of the satellite is equal to the velocity required for circular motion at its altitude, which can be calculated using the formula

V = √(GM/r)

Where G is the gravitational constant, M is the mass of the Earth, and r is the distance between the satellite and the center of the Earth.

Substituting the given values, we have

Vi = √[(6.67x[tex]10^{-11}[/tex]N[tex]m^{2[/tex]/[tex]Kg^{2}[/tex])(5.97x[tex]10^{24}[/tex] kg)/(6.67x[tex]10^{6}[/tex]m)] = 7646 m/s

Solving for the final velocity, we have

Vf = √[2(-7.5x[tex]10^{9}[/tex] J)/(m) + [tex]Vi^{2}[/tex]]

The mass of the satellite cancels out, and we get

Vf = √(2(-7.5x[tex]10^{9}[/tex] J)/([tex](7646m/s)^{2}[/tex] + [tex](7646m/s)^{2}[/tex] ) ≈ 7489 m/s

Therefore, the new orbital speed after friction from the Earth's upper atmosphere has done -7.5x[tex]10^{9}[/tex] J of work on the satellite is approximately 7489 m/s.

To know more about kinetic energy here

https://brainly.com/question/31432487

#SPJ4

Newton's second law states that force is proportional to what is required for an object of constant mass to change its velocity. This is equal to that object's mass multiplied by its acceleration. We use Newtons, kilograms, and meters per second squared as our default units, although any appropriate units for mass

To calculate the force required to accelerate the car forward at 4.88 m s2, we need to use the formula F = m x a, where F is force, m is mass, and a is acceleration. F = 741 kg x 4.88 m/s2F = 3,613.08 N Therefore, a force of 3,613.08 Newtons is required to accelerate the car forward at 4.88 m s2. We use Newtons, kilograms, and meters per second squared as our default units, although any appropriate units for mass or velocity (miles per hour per second, millimeters per second2, etc. could certainly be used as well - the calculation is the same regardless.

learn more about accelerate here

https://brainly.com/question/28811174

#SPJ11

The correct option is B, The resistance of the resistor is 184 Ω.

Z = √(R² + (Xl - Xc)²)

where R is the resistance, Xl is the inductive reactance, and Xc is the capacitive reactance.

Xl = Xc

2πf0L = 1/(2πf0C)

f0 = 1/(2π√(LC))

f0 = 1/(2π√(25.0 mH * 2.00 μF))

f0 = 1000 Hz

we can use the resonance frequency to calculate the reactances Xl and Xc at this frequency:

Xl = 2πfL = 2π(1000 Hz)(25.0 mH) = 157.1 Ω

Xc = 1/(2πfC) = 1/(2π(1000 Hz)(2.00 μF)) = 79.58 Ω

Now we can use the impedance formula to solve for the resistance R:

Z = √(R² + (Xl - Xc)²) = 200 Ω

R² + (Xl - Xc)² = 200²

R² + (157.1 Ω - 79.58 Ω)² = 40000

R² + 6104.6 Ω² = 40000

R² = 33895.4 Ω²

R = 184 Ω

A resistor is an electrical component designed to impede the flow of electric current. It is a passive two-terminal device that resists or limits the amount of current that flows through it. Resistors are commonly used in electronic circuits to control current, voltage, and power levels.

A resistor's resistance is measured in ohms (Ω), which is the ratio of the voltage applied across it to the current flowing through it. Resistors are made of various materials, including carbon, metal, and ceramic. The resistance value of a resistor can be fixed or variable, depending on its intended use. Resistors are crucial components in many electronic devices, such as radios, televisions, computers, and mobile phones.

To learn more about Resistor visit here:

brainly.com/question/24297401

#SPJ4

A THHN conductor with a size of #6 AWG is required for a 50-ampere circuit at 60 degrees Celsius.

According to 110-14(c)(1), a conductor must be sized based on the ampacity (current-carrying capacity) it can handle.

For a 50 ampere circuit, a THHN conductor with an ampacity of at least 50 amperes is required. However, the ampacity of a conductor can also depend on its temperature rating. Since this question specifies a temperature rating of 60 degrees Celsius, we need to consult the ampacity tables for THHN conductors rated for 60 degrees Celsius. According to the table, a THHN conductor with a size of #6 AWG is required for a 50-ampere circuit at 60 degrees Celsius.

To learn more about conductor, refer:-

https://brainly.com/question/8426444

#SPJ11

The impulse acting on an object is equal to the change in momentum it experiences. When we talk about net force, we're really talking about the rate at which momentum is changing. A constant net force means that momentum is changing at a constant rate, while a variable net force means that momentum is changing at a changing rate.

Now, if both graphs represent the same impulse acting on the baseball, it means that they both represent the same change in momentum. This tells us that the area under both graphs must be the same. This is because the area under a force-time graph represents the impulse experienced by an object.

So, in terms of geometric properties, the two graphs must have the same area under them if they represent the same impulse acting on the baseball. This holds true whether the net force is constant or variable.

To know more about net force, refer

https://brainly.com/question/14361879

#SPJ11

In an electrical circuit, current flows through conductors. When current flows through a conductor, the conductor heats up due to the resistance of the material.

This heat can cause the conductor to degrade over time and eventually fail, which can be dangerous or cause equipment damage. Therefore, the National Electrical Code (NEC) provides guidelines on how to calculate the proper size of conductors based on the amount of current they will carry and the ambient temperature they will be exposed to.

According to NEC 310-15(B)(5), the neutral conductor in a balanced 3-wire delta or 4-wire wye circuit is considered a current-carrying conductor for the purpose of applying derating factors, which means that the neutral conductor must be sized accordingly to ensure safe and reliable operation of the electrical system.

Learn more about electrical circuit

https://brainly.com/question/29032441

#SPJ4

Full Question: Current Carrying Conductors(310-15(B)(5) : The neutral conductor of a balanced 3-wire delta circuit, or 4 wire wye circuit is considered a current-carrying conductor for the purpose of applying the derating factors in Table 310-15(b)(2a).

image attached

The amount of deformation a material experiences due to an applied force is called strain.

The amount of deformation a material experiences due to an applied force is called strain. Strain is a measure of the degree to which a material is stretched or compressed under a given load, and it is typically expressed as a ratio of the change in length or shape of the material to its original length or shape.

Strain can be categorized into several types, including tensile strain, compressive strain, shear strain, and volumetric strain, depending on the type of deformation that occurs.

Tensile strain occurs when a material is stretched along its length, while compressive strain occurs when a material is compressed or shortened along its length.

Shear strain occurs when a material is subjected to a parallel force that causes it to slide or twist along a plane, while volumetric strain occurs when a material experiences a change in volume due to pressure.

Overall, the concept of strain is important in materials science and engineering, as it helps to describe the behavior of materials under different types of loads and can be used to design and optimize materials for specific applications.

For similar question on strain.

https://brainly.com/question/17046234

#SPJ11

Loose objects on the dashboard slide to the right when the car turns suddenly to the left because they have inertia

When loose objects are placed on the dashboard of a car, they may slide to the right when the car turns suddenly to the left. objects at rest tend to stay at rest and objects in motion tend to stay in motion. As the car turns left, there is a force pushing the loose objects to the right, and gravity alone is not strong enough to hold them in place. Therefore, the objects slide to the right due to their inertia. To prevent this, it's best to secure loose objects on the dashboard or remove them altogether to ensure safety while driving.

learn more about inertia Refer: https://brainly.com/question/30763701

#SPJ11

Uncompetitive inhibition reduces the maximum rate of the reaction and apparent affinity by binding to the enzyme-substrate complex. In contrast, mixed inhibition alters both the maximum rate and apparent affinity by binding to both the enzyme and the enzyme-substrate complex.

In uncompetitive inhibition, the inhibitor can only bind to the enzyme-substrate complex, not the free enzyme or the free substrate. This type of inhibition results in a decrease in both the maximum rate of the reaction and the apparent affinity of the enzyme for the substrate, as the inhibitor binds to the complex and prevents the release of the product.

In mixed inhibition, the inhibitor can bind to both the free enzyme and the enzyme-substrate complex, leading to a decrease in the maximum rate of the reaction and a change in the apparent affinity of the enzyme for the substrate. The inhibitor can either enhance or reduce the affinity of the enzyme for the substrate.

To know more about inhibition, here

brainly.com/question/29744524

#SPJ4

Pluto is missing the third criterion for planethood which states that 3, it must have cleared the neighborhood around its orbit.

Pluto is a dwarf planet in our solar system, located in the Kuiper Belt beyond the orbit of Neptune. It was discovered in 1930 and was considered the ninth planet in our solar system until 2006, when it was reclassified as a dwarf planet due to its size and failure to meet the third criterion for planethood, which states that a planet must have cleared its orbit of other debris.

Pluto has five known moons and is primarily composed of rock and ice. It has a highly elliptical orbit that takes it closer to the sun than Neptune at certain points, but also farther away than any other planet in our solar system.

Find out more on Pluto here: https://brainly.com/question/27507002

#SPJ1

The magnitude of the average contact force exerted on the leg assuming the total mass of the hand and the forearm to be 1.75 kg1.75 kg  is 554 N.

To solve this problem, we can use the equation F = Δp/Δt, where F is the average contact force, Δp is the change in momentum, and Δt is the time interval.

The change in momentum is given by Δp = mΔv, where m is the mass of the hand and forearm and Δv is the change in velocity. We can find Δv by using the formula Δv = v_f - v_i, where v_f is the final velocity (0 m/s, since the hand comes to rest) and v_i is the initial velocity (4.25 m/s). Substituting these values, we get Δv = -4.25 m/s. The mass of the hand and forearm is given as 1.75 kg.

Therefore, Δp = mΔv = (1.75 kg)(-4.25 m/s) = -7.44 kg⋅m/s.

Now we can substitute this value along with the time interval of 2.65 ms (which is 0.00265 s) into the equation F = Δp/Δt to get the average contact force:

F = Δp/Δt = (-7.44 kg⋅m/s)/(0.00265 s) = -2804.72 N

The negative sign indicates that the force is in the opposite direction of the motion, which is expected since the hand is slowing down. To get the magnitude of the force, we can take the absolute value:

|F| = 2804.72 N ≈ 554 N

So the magnitude of the average contact force exerted on the leg is approximately 554 N.

learn more about magnitude here:

https://brainly.com/question/14452091

#SPJ11

The tangential speed of Nairobi, Kenya, near the equator is approximately 465 m/s .

To calculate the tangential speed of Nairobi, Kenya, which is a city near the equator, we will use the following formula:
Tangential speed (v) = 2 × π × radius (r) / time period (T)
Here, the equatorial radius of the Earth (r) is 6,380 km (which we need to convert to meters), and the Earth completes one revolution in 23.93 hours (which we need to convert to seconds).
1. Convert the radius to meters:
r = 6,380 km * 1,000 m/km = 6,380,000 m
2. Convert the time period to seconds:
T = 23.93 hours * 60 min/hour * 60 s/min = 86,078.8 s
3. Calculate the tangential speed:
v = (2 × π × 6,380,000 m) / 86,078.8 s ≈ 465 m/s
So, the tangential speed of Nairobi, Kenya, near the equator is approximately 465 m/s. The correct answer is E) 465 m/s.

learn more about tangential speed Refer: https://brainly.com/question/17689540

#SPJ11

The car travels 26.7 meters while slowing down from 30.0 m/s to 23.4 m/s under the net force of 8047 N

We can solve this problem using the equation:

d = ((v_f + v_i)/2) * t

where d is the distance traveled, v_f is the final velocity, v_i is the initial velocity, and t is the time interval.

First, we can calculate the acceleration of the car using the formula:

a = F_net / m

where F_net is the net force acting on the car and m is the mass of the car. Substituting the given values, we get:

a = 8047 N / 1000 kg = 8.047 m/s^2

Next, we can use the formula:

v_f = v_i + a * t

to find the time interval t . Substituting the given values, we get:

23.4 m/s = 30.0 m/s + (-8.047 m/s^2) * t

Solving for t, we get:

t = (23.4 m/s - 30.0 m/s) / (-8.047 m/s^2) = 0.817 s

Finally, we can use the formula for distance to find the distance traveled:

d = ((23.4 m/s + 30.0 m/s) / 2) * 0.817 s = 26.7 m

Therefore, the car travels 26.7 meters while slowing down from 30.0 m/s to 23.4 m/s under the net force of 8047 N.

To know more about  acceleration visit link :

https://brainly.com/question/30660316

#SPJ11

To solve this problem, we can use the following equation:

Net force = mass x acceleration

We can rearrange this equation to solve for acceleration:

Acceleration = Net force / mass

Then, we can use the following equation to find the distance traveled:

Distance = (initial velocity + final velocity) / 2 x time

We can solve for time using the following equation:

Final velocity = Initial velocity + acceleration x time

Plugging in the given values, we get:

Acceleration = 8047 N / 1000 kg = 8.047 m/s^2

Final velocity = 23.4 m/s
Initial velocity = 30.0 m/s

Final velocity = Initial velocity + acceleration x time
23.4 m/s = 30.0 m/s + 8.047 m/s^2 x time
Time = (23.4 m/s - 30.0 m/s) / (8.047 m/s^2) = 0.812 s

Distance = (initial velocity + final velocity) / 2 x time
Distance = (30.0 m/s + 23.4 m/s) / 2 x 0.812 s = 21.6 m

Therefore, the car travels 21.6 meters while slowing down.
To find the distance the car travels while decelerating, we can use the work-energy principle. The work done by the net force equals the change in kinetic energy of the car.

First, let's calculate the change in kinetic energy:
ΔKE = 0.5 * m * (v_f² - v_i²)
where m is the mass of the car (1000 kg), v_i is the initial velocity (30.0 m/s), and v_f is the final velocity (23.4 m/s).

ΔKE = 0.5 * 1000 * (23.4² - 30.0²) = -214540 J

Since the car is decelerating, the net force (8047 N) is acting in the opposite direction of its motion. Therefore, the work done by the net force is negative:

W = -F * d
where F is the net force and d is the distance traveled.

Now, we can equate the work done by the net force to the change in kinetic energy and solve for d:
-8047 * d = -214540

d = 214540 / 8047 ≈ 26.66 meters

The car travels approximately 26.66 meters while slowing down.

Learn more about Net force here;

https://brainly.com/question/18109210

#SPJ11

To find the arrival time of an international flight, we add the duration of the trip to the departure time. In this case, the flight arrives at 3:16:22 AM.

The problem presents a scenario in which we are given the departure time of an international flight and its duration, and we are asked to determine the arrival time.

To solve this, we simply add the duration of the trip to the departure time. In this case, we added 10 hours, 40 minutes, and 35 seconds to the departure time of 4:35:47 PM.

4:35:47 PM + 10 hours, 40 minutes, 35 seconds = 3:16:22 AM

Therefore, the flight arrives at its destination at 3:16:22 AM. The resulting time, 3:16:22 AM, is the arrival time at the destination.

It is important to note that we used the 24-hour clock to represent the times in this problem, which is commonly used in international travel.

To know more about arrival time:

https://brainly.com/question/31344667

#SPJ4

The statement is true because the buoyancy force is directly proportional to gravitational acceleration, and Earth's gravitational acceleration is greater than Mars'.

1. Buoyancy force is given by the formula: F_b = V * ρ * g, where F_b is the buoyancy force, V is the volume of the submerged object, ρ is the density of the fluid, and g is the gravitational acceleration.
2. The volume (V) and density (ρ) of the fluid remain constant for both Earth and Mars, as they are inherent properties of the fluid and object.
3. The gravitational acceleration (g) is greater on Earth than on Mars.
4. Therefore, the buoyancy force (F_b) experienced by a block submerged in water on Earth will be greater than that on Mars due to the greater gravitational acceleration on Earth.

A block submerged in water experiences greater buoyancy force on Earth compared to Mars due to Earth's higher gravitational acceleration.

To know more about buoyancy force visit

https://brainly.com/question/13267336

#SPJ11

If neutrinos oscillated between five different types of neutrino during their transit from the sun to earth we would detect no neutrinos and would depend on the detection capabilities of our instruments and the specific types of neutrinos we are able to measure.

If neutrinos oscillated between five different types during their transit from the sun to earth, it means that the initial number of emitted neutrinos from the sun would have been spread out across these five different types. So, the number of neutrinos detected on earth would depend on how much oscillation occurred and how much of each type of neutrino was produced by the sun. However, it is estimated that about two-thirds of the emitted neutrinos from the sun are detected on earth, regardless of oscillation. It's important to note that neutrinos oscillate between three known types: electron, muon, and tau neutrinos. If they oscillated between five types, we would expect to detect a different proportion compared to what was emitted by the sun, but the exact number would depend on our ability to detect those specific types.

Learn more about neutrinos here: https://brainly.com/question/27870530

#SPJ11

a dropped softball will fall a vertical distance of approximately 4.9 meters (16.1 feet) during the first second of free fall, neglecting air resistance.

When an object is dropped from rest near the surface of the Earth, it is subject to the force of gravity, which causes it to accelerate downwards. The acceleration due to gravity is approximately 9.8 meters per second squared, which means that the velocity of the object increases by 9.8 meters per second (or 32.2 feet per second) for each second it falls.

During the first second of free fall, the object starts from rest and accelerates at a constant rate of 9.8 meters per second squared. Using the equations of motion, we can calculate the distance it falls during this time:

d = 1/2 * a * t^2

where d is the distance, a is the acceleration, and t is the time. Plugging in the values for the first second of free fall, we get:

d = 1/2 * 9.8 m/s^2 * (1 s)^2
d = 4.9 meters

Therefore, a dropped softball will fall a vertical distance of approximately 4.9 meters (16.1 feet) during the first second of free fall, neglecting air resistance.

Visit to know more about Air resistance:-

brainly.com/question/9143942

#SPJ11

Question A.

i. the force you need to apply to the box to move it down the hill at a constant speed is 500 N.

ii. the acceleration of the piano down the ramp is 4.90 m/s^2.

Question b.

the acceleration of the car down the ramp is 5.42 m/s^2, and the velocity of the car at the top of the ramp is 23.7 m/s.

We apply Newton's Second Law of Motion, which states that the net force acting on an object is equal to the product of its mass and acceleration:

F_net = m*a

v_f = v_i + at

d = v_it + 0.5at^2

Given values: :

Force F = 13000 N

Angle of incline θ = 30°

Mass of the car m = 1200 kg

we find  the component of the force that is parallel to the incline, which will cause the car to move down the ramp:

F_parallel = Fsin(θ) = 13000sin(30°) = 6500 N

we then find  acceleration of the car using Newton's Second Law:

F_net = m*a

a = F_net / m

a = F_parallel / m

a = 6500 N / 1200 kg

a = 5.42 m/s^2

we then  the velocity of the car at the top of the ramp using the kinematic equations:

v_f^2 = v_i^2 + 2ad

d = 125 m

v_i = 0 (the car starts from rest)

v_f = sqrt(2ad)

v_f = sqrt(25.42 m/s^2125 m)

v_f = 23.7 m/s

Learn more about kinematic equations: at: https://brainly.com/question/24458315

#SPJ1

The correct answer is a. Volatile radioisotopes are released into the atmosphere. Reprocessing nuclear fission material involves the extraction of usable materials, such as plutonium, from spent nuclear fuel.

This process can generate radioactive waste, which must be managed carefully to prevent exposure to humans and the environment.

One potential public health problem associated with reprocessing nuclear fission material is the release of volatile radioisotopes into the atmosphere. These isotopes can be carried by wind and air currents, and can be inhaled by humans or deposited on soil or water sources, causing potential health risks. The risks associated with these isotopes depend on their half-lives and how easily they can be absorbed into the body.

Reducing the concentration of U235, converting gas into solid pellets, and leaching of wastes into the soil are not directly associated with reprocessing nuclear fission material, but rather with other aspects of nuclear power generation and waste management. Therefore, options b, c, and d are incorrect.

To know more about nuclear fission

brainly.com/question/29141330

#SPJ11

The torque applied to the wrench is 0.375 Nm.

To calculate the torque, we need to know the distance between the force and the pivot point, and the magnitude of the force. The torque can be calculated using the formula:

Torque = Force x Distance x sin(theta)

where theta is the angle between the force vector and the line connecting the force to the pivot point. In this case, the force is applied perpendicular to the wrench, so theta is 90 degrees and sin(theta) is 1. Therefore, we can simplify the formula to:

Torque = Force x Distance

We are given the magnitude of the force as 2.5 N, and the distance from the force to the pivot point (the nut) as 15 cm. To use the formula, we need to convert the distance to meters:

Distance = 15 cm = 0.15 m

Now we can calculate the torque:

Torque = Force x Distance

= 2.5 N x 0.15 m

= 0.375 Nm

Therefore, the torque applied to the wrench is 0.375 Nm.

learn more about Torque here

https://brainly.com/question/17512177

#SPJ1

The acceleration of the ball is -9.8 m/s^2 (downward) during any of these time intervals. This is because the force of gravity is acting on the ball, causing it to accelerate downwards.

Even though the ball is moving upwards initially, its speed will eventually decrease to zero at the top of its trajectory, and then it will begin to fall back down with increasing speed. So, the direction of the acceleration is downwards, and its magnitude is constant at 9.8 m/s^2 (assuming no air resistance).
The acceleration of a ball tossed straight up, we need to consider the terms speed, direction, and acceleration.
The acceleration of the ball during any of these time intervals is determined by the force of gravity acting on it. In this scenario, the only force acting on the ball is gravity, which acts in the downward (negative) direction. The acceleration due to gravity is constant and approximately -9.81 m/s² (negative because it acts downward).
So, the acceleration of the ball during any of these time intervals is -9.81 m/s², acting in the downward (negative) direction.

Visit here to learn more about acceleration:

brainly.com/question/12550364

#SPJ11

The calculate the plane's average acceleration, we need to use the formula. average acceleration = final velocity - initial velocity / time the plane's final velocity is 320m/s, its initial velocity is 300m/s, and the time it took to speed up is 5 seconds.


The plane's average acceleration during those 5 seconds was 4m/s^2.To find the average acceleration of the plane during the 5 seconds, you can use the formula. Average acceleration = Final velocity - Initial velocity / Time In this case, the final velocity plane speed is 320 m/s, the initial velocity is 300 m/s, and the time is 5 seconds. Average acceleration = 320 m/s - 300 m/s / 5 Average acceleration = 20 m/s / 5 s Average acceleration = 4 m/s² So, the plane's average acceleration during those 5 seconds was 4 meters per second squared 4 m/s² while traveling in a straight line.

learn more about velocity here.

https://brainly.com/question/30741530

#SPJ11

The kinetic energy of the mass is a maximum both when the spring is most compressed and when the spring is most stretched.

This is because at these points, the spring is exerting the maximum force on the mass, causing it to accelerate and reach its maximum kinetic energy. When the spring is at its unweighted length, there is no force being applied to the mass by the spring, so the kinetic energy is not at its maximum.

The kinetic energy of the mass is at its maximum when the spring is at its unweighted length (when it isn't stretched or compressed). At this point, all the potential energy stored in the spring has been converted into kinetic energy, resulting in maximum motion of the mass.

To know more about kinetic energy click here .

brainly.com/question/26472013

#SPJ11

At the rated capacity of the water treatment plant, 4.85 minutes of disinfection are provided in the 1000 foot, 48 inch diameter pipeline using chlorine at a dosage of 4 ppm.

To calculate the time of disinfection provided in the pipeline, we need to know the volume of the pipeline and the dosage of chlorine used for disinfection.

Assuming the pipeline is filled to capacity with water, the volume of the pipeline can be calculated using the formula:

Volume = pi x (diameter/2[tex])^2[/tex]x length

Where pi is the constant 3.14, diameter is 48 inches (converted to feet by dividing by 12), and length is 1000 feet.

So, Volume = 3.14 x (48/2)^2 x 1000 = 452,389 cubic feet

To determine the dosage of chlorine, we need to know the concentration of chlorine added to the water. Let's assume a concentration of 4 parts per million (ppm), which is a common dosage for disinfection.

The dosage of chlorine can be calculated using the formula:

Dosage = concentration x volume

Where concentration is 4 ppm (or 0.004 parts per million, since 1 ppm = 0.001 parts per million) and volume is 452,389 cubic feet (converted to gallons by multiplying by 7.48, the number of gallons in a cubic foot).

So, Dosage = 0.004 x 452,389 x 7.48 = 13,478.7 gallons

Now, we need to calculate the time it takes for the water to flow through the pipeline at a rate of 4.0 MGD (million gallons per day). To convert MGD to gallons per minute (GPM), we divide by 1440 (the number of minutes in a day).

So, Flow rate = 4.0 MGD / 1440 = 2,778 GPM

Finally, we can calculate the time of disinfection provided in the pipeline using the formula:

Time = Dosage / Flow rate

Time = 13,478.7 gallons / 2,778 GPM = 4.85 minutes (rounded to two decimal places)

Therefore, at the rated capacity of the water treatment plant, 4.85 minutes of disinfection are provided in the 1000 foot, 48 inch diameter pipeline using chlorine at a dosage of 4 ppm.

Learn more about diameter pipeline

https://brainly.com/question/31356837

#SPJ4

The  mixing ratio of the parcel would remain unchanged at 0.005 even if the volume were to double.

The mixing ratio is defined as the ratio of the mass of water vapor to the mass of dry air in a parcel of air.

Given that the mass of dry air is 2 kg and the mass of water vapor is 10 g, we can convert the mass of water vapor to kilograms by dividing by 1000:

Mass of water vapor = 10 g ÷ 1000 = 0.01 kg

The mixing ratio is therefore:

Mixing ratio = Mass of water vapor ÷ Mass of dry air
Mixing ratio = 0.01 kg ÷ 2 kg
Mixing ratio = 0.005

So the mixing ratio of the parcel is 0.005.

If the volume were to double to 2 m^3, the mass of dry air and water vapor in the parcel would remain the same, but the mixing ratio would change because the mass of dry air per unit volume would decrease.

The new mixing ratio can be calculated as follows:

Mass of dry air per unit volume = Mass of dry air ÷ Volume
Mass of dry air per unit volume = 2 kg ÷ 1 m^3 = 2 kg/m^3

New mixing ratio = Mass of water vapor ÷ Mass of dry air per unit volume
New mixing ratio = 0.01 kg ÷ 2 kg/m^3
New mixing ratio = 0.005

So the mixing ratio of the parcel would remain unchanged at 0.005 even if the volume were to double.

VisiVisit to know more about Mixing ratio:-

brainly.com/question/29649149

#SPJ11

An anion is defined as:A) a charged atom or group of atoms with a net negative charge.

An anion is formed when an atom gains one or more electrons, resulting in a negative charge due to the increased number of negatively charged electrons compared to positively charged protons in the atom.An anion is an ion with a negative charge. It is formed when an atom or group of atoms gains one or more extra electrons, giving it a net negative charge. Examples of common anions include chloride (Cl-), sulfate (SO42-), and carbonate (CO32-). Therefore, the term "anion" specifically refers to a negatively charged ion or species.

learn more about anion Refer: https://brainly.com/question/20781422

#SPJ11

It is important to distinguish between the two concepts to understand how energy is transferred and how it affects the properties of different materials.

Heat and temperature are related concepts in thermodynamics. However, they have different meanings and measurements. Temperature refers to the average kinetic energy of molecules within an object or a substance. It is a measure of how hot or cold something is, and it is usually measured in Celsius or Fahrenheit units. Temperature is a property of a single object or substance.

On the other hand, heat refers to the transfer of energy from one object or substance to another. Heat is a form of energy that flows from a hotter object to a cooler one until they reach thermal equilibrium. Heat is measured in Joules or calories, and it is dependent on the temperature, mass, and specific heat capacity of the objects involved in the transfer.

In summary, temperature is a property of a single object or substance that measures the average kinetic energy of its molecules. Heat, on the other hand, is a form of energy that is transferred between objects or substances due to a temperature difference.

To learn more about thermodynamics click here

brainly.com/question/1368306

#SPJ11