True.
The safety of maintenance personnel and electricians who may need to access the electrical equipment behind the panels.
Properly securing the wiring methods and equipment can prevent accidental contact with live conductors, reduce the risk of electrical hazards, and facilitate safe and efficient maintenance and repair of the electrical system.
This statement is in accordance with the requirements of the National Electrical Code (NEC) Article 300.23, specifies that wiring methods and equipment installed behind panels designed to permit access (such as drop ceilings) must be arranged and secured in such a way that panels can be removed to provide access to the electrical equipment.
According to the National Electrical Code (NEC) section 300.23, wiring methods and equipment installed behind panels designed to permit access, such as drop ceilings, must be arranged and secured in a manner that allows for the removal of panels to gain access to electrical equipment.
This requirement is necessary to ensure that maintenance and repair of electrical equipment can be safely performed without causing damage to the wiring or equipment.
Electrical equipment is installed behind panels designed for access, it is important to make sure that the panels are easily removable without causing any damage to the wiring or equipment.
This is achieved by properly securing the wiring and equipment to the structure using appropriate fasteners and support systems.
Additionally, the wiring and equipment should be arranged in a way that allows for easy access to all components without the need to remove any unnecessary materials or components.
The NEC requires that wiring methods and equipment installed behind panels designed for access be arranged and secured in a manner that allows for easy removal of panels to gain access to electrical equipment.
This requirement ensures that maintenance and repair of electrical equipment can be safely performed without causing damage to the wiring or equipment.
For similar questions on Equipment
https://brainly.com/question/30003482
#SPJ11
The interconnecting of timers is commonly calleda. groupingB.sequencingb. programmingd. cascading
The interconnecting of timers is commonly called cascading. Option d is answer.
Cascading is the interconnection of timers in a way that allows one timer's output to trigger the start of another timer's countdown. This technique is often used in industrial automation systems to sequence events or processes that require precise timing. By cascading timers, it is possible to create complex timing sequences that are reliable and accurate.
This approach is particularly useful for applications where multiple timers need to work together in a coordinated manner to achieve a specific goal. Cascading timers is an effective way to simplify the programming and control of complex systems, as it allows for a more modular and scalable approach to timing control.
Option d is the answer.
You can learn more about timer at
https://brainly.com/question/29850873
#SPJ11
(250-96(b)) Where required for the reduction of electric noise for electronic equipment, electrical continuity of metal raceway is not required, and the metal raceway can terminate to a(n) ______ nonmetallic fittings(s)or spacer on the electronic equipment.
Where required for the reduction of electric noise for electronic equipment, electrical continuity of metal raceway is not required, and the metal raceway can terminate to a nonmetallic fitting or spacer on the electronic equipment.
Hi! In accordance with NEC 250-96(b), where required for the reduction of electric noise for electronic equipment, electrical continuity of metal raceway is not required, and the metal raceway can terminate to a nonmetallic fitting(s) or spacer on the electronic equipment.
According to NEC 250-96(b), where it is necessary to reduce electric noise for electronic equipment, electrical continuity of metal raceway is not required. In such cases, the metal raceway can terminate to a nonmetallic fitting or spacer on the electronic equipment. This helps to prevent the transfer of electrical noise from the raceway to the equipment, which can interfere with its proper functioning. Nonmetallic fittings or spacers are used because they do not conduct electricity and therefore do not provide a path for the noise to travel.
Learn more about electrical continuity here;
https://brainly.com/question/12791045
#SPJ11
Life safety branch of the emergency systemshall supply power for all of the following except: ________________.
517.32
The Life safety branch of the emergency system shall supply power for all of the following except non-emergency loads. Non-emergency loads include equipment and appliances that are not essential for life safety, such as lighting for non-essential areas, heating and cooling systems, and other non-essential equipment.
The Life safety branch is critical to ensure that essential life safety systems such as emergency lighting, fire alarms, and communication systems remain operational during an emergency or power outage. It is important to note that the Life safety branch must be designed and installed according to specific codes and standards to ensure its reliability and functionality.
Therefore, it is important to consult with a qualified electrical engineer or contractor to ensure compliance with the applicable regulations and guidelines.
Learn more about power here : brainly.in/question/1888377
#SPJ11
A typical source rock of oil, which started out as mud in which dead organic matter settled, isChoose one:A. shale.B. granite.C. conglomerate.D. sandstone.
Shale is the primary source rock for the vast majority of the world's oil and natural gas reserves.
A typical source rock of oil, which started out as mud in which dead organic matter settled, is shale. Shale is a sedimentary rock that is formed from the accumulation of clay and other fine-grained sedimentary particles. Over time, the accumulation of dead organic matter, such as plankton and algae, is buried by the sedimentary layers and undergoes a process of heat and pressure called diagenesis, which eventually transforms the organic matter into hydrocarbons such as oil and natural gas.
Learn more about rock here:
https://brainly.com/question/17137899
#SPJ11
T/F: Some of the key factors in database design are content, access, structure, archiving, and security.
The given statement "Some of the key factors in database design are content, access, structure, archiving, and security." is true because database design is the process of creating a database that is well-organized, efficient, and capable of meeting the needs of its users.
This refers to the type of data that will be stored in the database. It is important to identify the types of data, their relationships, and how they will be organized in the database. Database access involves determining who will have permission to view, edit, or delete data in the database.
This includes defining user roles and permissions, implementing access controls, and creating a user-friendly interface for accessing and manipulating data. This refers to the organization of data in the database, including the tables, fields, and relationships between them.
Learn more about database design: https://brainly.com/question/13266923
#SPJ11
How many 30-pin SIMMs are installed in one bank?
The number of 30-pin SIMMs installed in one bank can vary from 2 to 8, depending on the size of the individual SIMMs and the configuration of the memory bank.
72-pin SIMMs, the number of 30-pin SIMMs installed in one bank depends on the type of SIMM and the memory controller of the computer.
30-pin SIMMs were used in older computers, such as the first generations of Macintosh computers and some IBM PCs.
SIMMs typically came in sizes of 256KB, 512KB, 1MB, 2MB, 4MB, and 8MB.
A bank of memory using 256KB or 512KB SIMMs would typically have 8 slots, whereas banks of 1MB and 2MB SIMMs would have 4 slots.
Banks using 4MB and 8MB SIMMs would have 2 slots.
It is worth noting that 30-pin SIMMs are no longer commonly used in modern computers.
For similar questions on bank
https://brainly.com/question/14905714
#SPJ11
The collections framework algorithms are ___, i.e., each of these algorithms can operate on objects that offer given interfaces without concern to the underlying implementations
The collections framework algorithms are implementation-agnostic, i.e., each of these algorithms can operate on objects that offer given interfaces without concern to the underlying implementations.
This allows for flexibility and adaptability when working with different types of collections. The collections framework algorithms are interface-based, i.e., each of these algorithms can operate on objects that offer given interfaces without concern to the underlying implementations. This means that the algorithms are designed to work with any class that implements the required interface, regardless of how the class is implemented internally. This allows for greater flexibility and reusability of code within the collections framework.
Learn More about framework here :-
https://brainly.com/question/28991812
#SPJ11