(300-5(F)) Backfill used for underground wiring must not damage the wiring method, contribute to the corrosion of the raceway or prevent compaction of the fill.(True/False)

When there are several equipment grounding conductors in a receptacle outlet box, they must be spliced together and attached to a pigtail for the receptacle, under the National Electrical Code (NEC).

Section 250.148 of the National Electrical Code (NEC) mandates that when there are multiple equipment grounding conductors present in a receptacle outlet box, all such conductors must be spliced together and connected to a pigtail that is brought out for the receptacle. This requirement ensures that all equipment grounding conductors are properly connected to the receptacle's grounding terminal, which provides a low-impedance path for fault currents to flow. Failure to comply with this requirement can result in serious electrical hazards, so it is important to follow the NEC guidelines carefully and seek the assistance of qualified professionals as needed.

Learn more about Equip Grounding Conductors: Splice & Pigtail here.

https://brainly.com/question/30150150

#SPJ11

Answer: Electrical nonmetallic tubing, also known as ENT, is a type of conduit that is used to protect and route electrical wiring in residential and commercial buildings. It is made of a plastic material that is lightweight, flexible, and easy to install. When it comes to installing ENT in a concrete slab on grade, there are specific requirements that must be followed to ensure safety and compliance with building codes.

Explanation:

According to section 362-10(6) of the National Electrical Code, ENT and fittings are permitted to be installed in a concrete slab on grade as long as the tubing is placed upon sand or approved screenings. This means that the tubing must be supported by a layer of sand or other approved material to prevent it from being crushed or damaged by the weight of the concrete.

When installing ENT in a concrete slab on grade, it is important to choose the right type of tubing and fittings for the job. ENT comes in different sizes and thicknesses, so it is important to choose the right size for the wiring being installed. Fittings such as couplings, elbows, and tees must also be selected carefully to ensure a proper fit and to prevent leaks.

Overall, installing electrical nonmetallic tubing in a concrete slab on grade requires careful planning and attention to detail. By following the guidelines set forth by the National Electrical Code and using high-quality tubing and fittings, electricians can ensure a safe and reliable installation that meets the needs of their clients.
Hi! I understand that you would like me to use the terms "Electrical," "tubing," and "200 words" in my response. Here is the answer to your question:

Electrical nonmetallic tubing (ENT) and fittings shall be permitted to be "encased" in a concrete slab on grade where the tubing is placed upon sand or approved screenings.

Step-by-step explanation:

1. Electrical: The term "electrical" refers to the system and components that involve the distribution and use of electricity. In this case, it specifically relates to the nonmetallic tubing and fittings used for electrical installations.

2. Tubing: In this context, "tubing" refers to the electrical nonmetallic tubing, which is a flexible conduit designed to protect and route electrical wiring within a structure. ENT is made from nonmetallic materials, such as PVC, and is often used in concrete slabs on grade.

3. Encased: The term "encased" means that the tubing and fittings are embedded or surrounded by the concrete slab, providing protection and support for the electrical system.

In summary, the code allows for electrical nonmetallic tubing and fittings to be encased within a concrete slab on grade as long as they are placed upon sand or approved screenings, ensuring proper installation and safety.

Learn more about ENT here : brainly.in/question/12742463

#SPJ11

Overbuild refers to the practice of placing additional asphalt mix on top of the required thickness to achieve the desired density. This practice is often used to compensate for inadequate compaction during initial placement or to address areas of low density.

In general, overbuild should not be used as a primary means of achieving density because it can result in pavement distresses such as rutting and cracking. Instead, efforts should be made to achieve the desired density during initial placement through proper mix design, compaction techniques, and equipment calibration.

If overbuild is used, it is important to test the density to ensure that the desired level is achieved. However, overbuild should only be tested for density if it is necessary due to the specific project requirements or conditions, such as extremely heavy traffic loads or other unusual factors.

Testing for density in overbuild situations can be challenging because the additional layer of asphalt can make it difficult to obtain accurate density measurements. Special techniques, such as nuclear density testing or coring, may be required to accurately measure the density of the overbuild layer.

In summary, overbuild should not be used as a primary means of achieving density, and testing for density in overbuild situations should only be done if it is necessary due to project requirements or conditions. It is important to carefully consider the potential risks and benefits of overbuild and select the appropriate compaction methods to achieve the desired density during initial placement.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ11

The correct answer would be b) Left-hand traffic and Runway 18. When approaching an airport, pilots must follow a specific traffic pattern to ensure safe and efficient arrivals and departures. The traffic pattern direction and runway in use are determined by the wind direction and other factors. In this case, Runway 18 is being used, and left-hand traffic is the appropriate pattern to follow.

This means that all turns in the pattern will be made to the left, and aircraft will enter the pattern from the downwind leg, which is opposite the direction of landing. Left-hand traffic and Runway 22.The choice of traffic pattern and runway for landing is determined by a number of factors such as wind direction, traffic flow, and airport layout. The appropriate selection ensures safe and efficient operations during takeoff and landing.In this case, the correct answer would be a) Left-hand traffic and Runway 22. This means that aircraft approaching the airport would fly a left-hand traffic pattern, which involves making left turns when approaching and departing from the runway.The choice of Runway 22 indicates that the runway direction is oriented at 220 degrees. This is important because it aligns with the direction of the wind and allows aircraft to take off and land into the wind, which provides better performance and control.Option b) Left-hand traffic and Runway 18 would not be the correct choice as the runway is oriented in a different direction than the wind, which could create a crosswind situation, making landing and takeoff more difficult and unsafe.Option c) Right-hand traffic and Runway 18 would also not be the correct choice as it would require aircraft to fly a right-hand traffic pattern, which is less common and may cause confusion or errors in communication between pilots and air traffic controllers.In summary, the appropriate choice of traffic pattern and runway for landing is determined by factors such as wind direction, airport layout, and traffic flow, and selecting the correct combination ensures safe and efficient operations during takeoff and landing.

To learn more about left-hand traffic click on the link below:

brainly.com/question/28195793

#SPJ11

The PC (short for "performance rating") refers to the peak bandwidth of the memory, measured in megabytes per second (MB/s).

PC3200 memory has a peak bandwidth of 3200 MB/s, while PC4000 memory has a peak bandwidth of 4000 MB/s.

If you want to purchase memory running at 400 MHz, you should choose the PC4000 memory, as it provides a higher peak bandwidth.

Potentially better performance.

The PC (short for "performance rating") designates the maximum bandwidth of the memory, expressed in megabytes per second (MB/s).

Peak bandwidth for PC3200 memory is 3200 MB/s, whereas peak bandwidth for PC4000 memory is 4000 MB/s.

Due to its increased peak bandwidth and potential for improved performance, PC4000 RAM is the best option if you want to buy memory that operates at 400 MHz.

For similar question on PC

https://brainly.com/question/31562981

#SPJ11

Circuit breakers play an important role in ensuring the safe operation of electrical systems, particularly in fluorescent lighting circuits. As per the National Electrical Code (NEC) section 240.83(d).

Circuit breakers that act as switches in circuits for fluorescent lighting must adhere to particular specifications.

First, these circuit breakers need to be listed, which implies an accredited agency like Underwriters Laboratories (UL) has evaluated and approved them.

Second, "SWD+HID" must be written on the circuit breaker. The abbreviation "SWD" denotes "Switching Duty," indicating that the breaker was created primarily for switching purposes. HID, which stands for "High-Intensity Discharge," refers to the kind of lighting that is frequently used in commercial and industrial environments, such as metal halide or high-pressure sodium lamps.

Section 450.3 of the NEC specifies rules for the protection of transformers and related equipment, with the ultimate objective of guaranteeing safety and reducing the possibility of electrical dangers.

Learn more about National Electrical Code (NEC) here

https://brainly.com/question/30757813

#SPJ11

According to section 501.10 of the National Electrical Code, threaded rigid metal conduit or threaded steel must be used for the last 24 inches of an underground run to emergence. This is because these materials provide the necessary durability and strength to withstand the pressure and environmental factors that can impact underground electrical systems.

For such more question on installation

https://brainly.com/question/28452224

#SPJ11

The question is about the principles that Paul Rand followed when creating trademark designs to ensure their functionality over a long period of time. Paul Rand realized that to achieve this, he needed to create trademark designs based on elementary shapes that were simple, timeless, and easily recognizable.

Paul Rand believed that in order for trademark designs to remain functional and effective over a long period of time, they needed to be simple and timeless. By focusing on these characteristics, Rand was able to design logos that remained functional and relevant for many years.

In essence, Rand's approach to design was grounded in a deep understanding of the principles of simplicity, clarity, and longevity, which enabled him to create iconic brand identities that have stood the test of time.

Know more about the trademark

https://brainly.com/question/11957410

#SPJ11

A tsunami watch is issued by the Pacific Tsunami Warning Center when a large earthquake occurs in the Pacific Ocean that has the potential to generate a tsunami. They detect an earthquake or other event that has the potential to generate a tsunami in the Pacific Ocean.

The watch is issued as a precautionary measure to alert coastal communities to the possibility of a tsunami and to encourage them to prepare for the worst-case scenario. The warning center monitors seismic activity and sea level readings to determine the likelihood of a tsunami and will issue a warning if there is a high probability of a tsunami reaching the coastline. It is important to take tsunami watches and warnings seriously and follow evacuation orders to ensure the safety of yourself and others.
The watch is issued to alert affected coastal regions and help them prepare for a possible tsunami, allowing residents and officials to take necessary precautions and monitor the situation closely.

Learn more about seismic activity here:

brainly.com/question/30667043

#SPJ11

A tsunami watch is issued by the Pacific Tsunami Warning Center when there is a possibility of a tsunami occurring in the Pacific Ocean, usually due to an earthquake or other seismic event.

Tsunamis are massive waves that result from seismic activity or volcanic eruptions beneath the ocean. When formed in the open sea, the height of the waves remains relatively constant. However, as the waves approach the shore, they gather momentum and grow taller due to the decreasing depth of the water.

This watch serves as an early warning to coastal areas, allowing them to prepare for a potential tsunami.

Learn more about Tsunamis: https://brainly.com/question/11687903

#SPJ11

According to National Electrical Code (NEC) 210.63, the electrical outlet accessing must be installed within 25 feet of heating, air conditioning, and refrigeration utilities that are level with the material.

According to National Electrical Code (NEC) 210.63, the electrical outlet must be installed within 25 feet of the accessing point at the same level as the heating, ventilation, cooling, and cooling equipment. National Electrical Code (NEC), or NFPA 70, is the United States standard for the safety of electrical installations and equipment.

It is part of the National Fire Code series published by the National Fire Protection Association (NFPA), a private trade association. Although the word "state" is used, it is not a federal law. It is often adopted by states and municipalities to regulate electrical safety. In some cases, NECs are revised and amended as local regulations are voted on by local leaders and can be vetoed. The "rule of thumb" ensures that these standards are followed.

Learn more about accessing:

brainly.com/question/14286257

#SPJ11

No, In the context of a book, the terms "standards" and "protocols" do not mean the same thing.

Standards refer to established guidelines or criteria that are used to measure quality and consistency, whereas protocols are a set of rules or procedures that govern how actions are performed or how information is communicated. Both terms are important in different aspects of a book, but they serve distinct purposes.

So, the long answer is that although the terms "standards" and "protocols" may be used in similar contexts, they refer to different things and have distinct meanings.

Know more about the protocols

https://brainly.com/question/30547558

#SPJ11

The correct answer is (b) 6 degrees. A special engineering study is required for slopes with an incline greater than 6 degrees, as stated in the International Building Code (IBC) section 1612.3.

In civil engineering and construction, a slope refers to an inclined surface or ground. Slopes can be found in a variety of natural and man-made environments, including hillsides, road embankments, building sites, and retaining walls. The slope of a surface is typically measured in terms of its angle of inclination or its gradient. The angle of inclination is expressed in degrees, while the gradient is expressed as a percentage or a ratio. For example, a slope with a 10% gradient rises 10 units for every 100 units of horizontal distance. Slopes can pose various challenges and hazards, including erosion, landslides, and instability. For this reason, proper design and construction techniques are necessary to ensure the safety and stability of slopes, especially those located near buildings, roads, or other infrastructure. Special engineering studies may be required for slopes with steep inclines or other potentially hazardous conditions. These studies typically involve detailed analysis and testing to evaluate factors such as soil composition, water content, and stability, and to determine appropriate design measures and safety precautions.

Learn more about slopes here:

https://brainly.com/question/3944688

#SPJ11

In addition to saving physical space and energy, virtual servers offer other benefits such as improved reliability, easier backup and disaster recovery, and increased scalability.

Virtual servers can help consolidate multiple machines into one box, saving floor space and electricity. A virtual server is a software-based emulation of a physical server that can run multiple operating systems and applications on a single physical machine. By using virtualization technology, businesses can reduce their hardware costs, minimize energy consumption, and improve resource utilization. With virtual servers, multiple virtual machines can be created and hosted on a single physical server. Each virtual machine has its own operating system, applications, and resources, but they all share the same physical resources of the host machine. This means that businesses can run multiple servers on a single box, saving space and reducing energy consumption.

Learn more about virtual servers here:

https://brainly.com/question/30887550

#SPJ11

Regarding the use of flaps during level turns, it is true that raising flaps will require added forward pressure on the yoke or stick.

However, it is not true that the lowering of flaps increases the stall speed. Instead, the raising of flaps increases the stall speed. Raising the flaps also reduces lift and increases drag, which can affect the aircraft's performance during the turn. Therefore, it is important for pilots to understand the effects of flaps on their aircraft and make adjustments accordingly to ensure safe and efficient flight.

To learn more about yoke click the link below:

brainly.com/question/29914087

#SPJ11

The correct answer is c. Try block. In Java, to catch an exception that might be thrown by a block of code, that code must be enclosed in a try block.

A try block is followed by one or more catch blocks, which are used to catch and handle any exceptions that are thrown within the try block.

The basic syntax of a try-catch block in Java is as follows:

csharp

try {

   // code that might throw an exception

} catch (ExceptionType e) {

   // exception handler

}

The code that might throw an exception is enclosed in the try block. If an exception is thrown, the Java runtime system will search for a matching catch block to handle the exception.

The catch block specifies the type of exception it can handle, using the ExceptionType parameter. If the type of exception thrown matches the type specified in the catch block, the code within the catch block is executed to handle the exception.

In addition to try and catch blocks, Java also provides a finally block, which is used to specify code that should be executed regardless of whether an exception is thrown or caught.

The finally block is optional and is typically used for cleanup code that needs to be executed, such as closing a file or releasing a resource, regardless of whether an exception occurred or was caught.

In summary, to catch an exception in Java, the code that might throw the exception must be enclosed in a try block, followed by one or more catch blocks to handle the exception.

The finally block is optional and is used to specify code that should be executed regardless of whether an exception is thrown or caught.

Learn more about Java here:

https://brainly.com/question/29897053

#SPJ11

An understanding of electricity is essential to the study of matter because electricity plays a fundamental role in the behavior of atoms and molecules.

Electricity is the flow of electrons, which are negatively charged particles that orbit around the nucleus of an atom. The behavior of electrons determines the properties of matter such as conductivity, magnetism, and reactivity. Without electricity, many of the technological advancements we rely on today, such as electronics and energy generation, would not be possible.

Additionally, an understanding of electricity is necessary in fields such as chemistry and physics, as it is often involved in chemical reactions and physical processes. Therefore, to fully understand matter and its properties, an understanding of electricity is necessary.

Learn more about electricity: https://brainly.com/question/776932

#SPJ11

The receiving device checks the Frame Check Sequence (FCS) field in the frame to ensure that the frame has not been corrupted during transmission.

The FCS field contains a mathematical checksum that is calculated by the transmitting device before the frame is sent. When the frame is received, the receiving device recalculates the checksum and compares it to the value in the FCS field.

If the two values match, the frame is considered error-free and is accepted. If the values do not match, the receiving device assumes that the frame has been corrupted during transmission and discards it.

Therefore, the FCS field is an important mechanism for ensuring the reliability of data transmission in a network.

A frame is transmitted from one networking device to another in a networking environment.

The receiving device checks the FCS (Frame Check Sequence) field in the frame to ensure data integrity and detect any possible errors that may have occurred during the transmission process.

The FCS is a type of error-detection mechanism that helps maintain the reliability and accuracy of the data being transmitted between devices.

By checking the FCS field, the receiving device can verify if the received frame is error-free or corrupted, and take appropriate action, such as requesting retransmission or discarding the frame.

Learn more about network click here:

brainly.com/question/14276789

#SPJ11

A router will search for startup configuration information in the following default order:

1. NVRAM (Non-Volatile Random Access Memory) - This is where the router stores its startup configuration by default.
2. TFTP (Trivial File Transfer Protocol) server - If the router is configured to look for a startup configuration on a TFTP server, it will check there next.
3. ROM (Read-Only Memory) - If the router cannot find a startup configuration in NVRAM or on a TFTP server, it will look for a default configuration in its ROM.
4. Setup mode - If no startup configuration is found in any of the above locations, the router will enter setup mode, where an administrator can manually configure the router.
A router will search for startup configuration information in the following default order:
1. NVRAM (Non-Volatile Random Access Memory)
2. TFTP (Trivial File Transfer Protocol) server
First, the router checks NVRAM for the saved startup configuration file. If it doesn't find one, it proceeds to search for a configuration file on a TFTP server, which is specified by the router's configuration register settings.

Learn more about configuration here

https://brainly.in/question/9181604

#SPJ11

The network administrator is trying to accommodate Quality of Service (QoS) and bandwidth management to give high priority to real-time applications traffic in the small business network.

The network administrator is trying to accommodate two types of network services: Quality of Service (QoS) and Traffic Shaping. QoS is a technique that prioritizes certain types of traffic over others, ensuring that real-time applications receive the bandwidth they require. Traffic shaping, on the other hand, manages the flow of traffic on the network, preventing congestion and ensuring that all applications receive the necessary bandwidth.

Learn More about Quality of Service here :-

https://brainly.com/question/15295852

#SPJ11

To create subnets for WAN links that need only 2 useable addresses, we need to borrow 2 additional bits from the /26 subnet mask.

In order to create subnets for WAN links that need only 2 useable addresses, we need to borrow 2 additional bits from the /26 subnet mask. This will give us a subnet mask of /28, which provides 16 subnets with 14 hosts per subnet (2 of which are reserved for network and broadcast addresses). This will allow us to efficiently use our IP address space and allocate addresses for our WAN links as needed.

Learn more about bits here

https://brainly.com/question/30791648

#SPJ11

The observed orbital decay provides strong support for the prediction that neutron star binaries radiate gravitational waves, as predicted by general relativity.

Einstein's general theory of relativity predicts that two orbiting neutron stars should radiate gravitational waves because the orbits should slowly lose energy in the form of these waves, causing the two stars to gradually spiral closer together. As the neutron stars move closer together, their orbital period should decrease. This is because the gravitational force between the two stars is proportional to the inverse square of the distance between them, so as they get closer, the force becomes stronger and they move faster. Observations of neutron star binaries have indeed shown that their orbital periods are decreasing over time, in a manner consistent with the predictions of general relativity. This decrease in orbital period is known as "orbital decay" and it has been measured very precisely using techniques such as pulsar timing.

Learn more about gravitational waves here:

https://brainly.com/question/29607077

#SPJ11

A. Carrier sense multiple access with collision detection (CSMA/CD).

In Ethernet networks, the media access control (MAC) protocol known as carrier sense multiple access with collision detection (CSMA/CD) is used to identify whether the communication channels are clear and when a device is free to send data. Devices must listen to the network in order to determine if any other devices are transmitting data at the moment. The gadget can transfer data if the channel is open. The data transmitted by both devices become corrupted if two devices attempt to communicate at the same time due to a collision. In this scenario, the devices halt transmission, wait an arbitrary period of time, and then try again. CSMA/CD helps to prevent data collisions and ensure efficient use of the network by allowing multiple devices to share the same communication channel.

learn more about collision detection here:

https://brainly.com/question/29151638

#SPJ11

The provisions required for mounting conduits on indoor walls or in rooms that must be hosed down frequently is to provide adequate clearance between the mounting surface and the electrical equipment.

This is to ensure that the electrical equipment is not damaged or affected by any water or moisture that may be present during the cleaning process. The clearance should be sufficient to allow for easy cleaning access and should also prevent any water from penetrating the conduit or entering the equipment through any openings. Additionally, any mounting hardware or brackets used should be constructed from materials that are corrosion-resistant and can withstand exposure to water and cleaning chemicals. Proper installation of conduits in these environments is essential to ensure the safety and reliability of the electrical system.

Learn more about indoor walls here:

https://brainly.com/question/30027764

#SPJ11

False. Mortise locks are actually considered higher security locking devices and are commonly used in commercial settings such as office buildings, hotels, and schools.

Mortise locks are typically considered higher security locking devices than standard cylindrical locks. This is due to their construction and installation method, which involves a mortise pocket being cut into the door frame. The lock is then securely fastened into the door, providing greater resistance against forced entry. Additionally, mortise locks often feature additional security measures such as deadbolts and latchbolts, which further increase their resistance to unauthorized access. These locks are commonly used in commercial settings such as office buildings, hotels, and schools, where security is a top priority. Overall, mortise locks are a reliable and effective option for those seeking a higher level of security for their property.

Learn more about devices here:

https://brainly.com/question/29845328

#SPJ11

The correct statement regarding wake turbulence is: "The primary hazard is loss of control because of induced roll." Wake turbulence, caused by vortex generation, can pose a hazard to other aircraft, especially during takeoff and landing.

The induced roll from the wake turbulence can make it difficult for pilots to maintain control of their airplane. Vortex generation begins at rotation and continues as the airplane gains altitude. The primary hazard of wake turbulence is a loss of control due to induced roll, which can occur if an airplane encounters wake turbulence from a larger or heavier airplane. It is important for pilots to be aware of this hazard and take appropriate measures to avoid encountering wake turbulence.

Learn more about hazard here-

https://brainly.com/question/29602984

#SPJ11

Answer: True. A junction box used with a cellular metal floor raceway should be level with the floor grade, sealed against the entrance of water or concrete, and be made of metal to ensure electrical continuity.

The definition of electric current is the rate of charge flow given by

Since there is a constant flow of charge in this instance, we know that electric current also exists.

The electrical continuity instantaneous discharge of charge particles that have accumulated at a certain spot called static electricity.

If a body part is substantially charged, we can state that when it comes into contact with another body with a lower potential, the heavy charge will instantly discharge.

As a result, it is an instantaneous current that flows for a brief period of time.

so the right response will be Static electricity is not continuous, whereas electric current is.

Learn more about electrical continuity here

https://brainly.com/question/12791045

#SPJ11

When a host is accessing a web server on a remote network, intermediary network devices perform these three functions:

1. Packet forwarding: Devices like routers and switches forward packets of data between the host and the web server, ensuring that the data reaches its destination.

2. Addressing and path determination: Devices like routers use routing tables to determine the best path for data packets to travel between the host and the remote web server. They also translate IP addresses as needed, such as when using Network Address Translation (NAT).

3. Traffic management and control: Network devices like routers and switches manage and control data traffic by prioritizing packets and controlling congestion, ensuring that data is transmitted efficiently across the network.

Learn More about web server here :-

https://brainly.com/question/31420520

#SPJ11

A luminaire (lighting fixture) that weighs more than 50 pounds shall be supported independently of the outlet box, as stated in section 314.27 of the National Electrical Code.

This means that the fixture should be supported by a separate structural support that can handle the weight of the fixture, rather than relying on the outlet box alone. This is important for safety reasons and to ensure that the fixture is securely installed.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.

Fixtures may also have a switch to control the light, either attached to the lamp body or attached to the power cable. Permanent light fixtures, such as dining room chandeliers, may have no switch on the fixture itself, but rely on a wall switch.

Fixtures require an electrical connection to a power source, typically AC mains power, but some run on battery power for camping or emergency lights. Permanent lighting fixtures are directly wired. Movable lamps have a plug and cord that plugs into a wall socket.

learn more about  luminaire here:

https://brainly.com/question/24309468

#SPJ11

Answer:

One statement that describes a router memory type is that it is typically volatile memory, meaning that its contents are lost when the router is powered off or restarted.

Another statement is that router memory often contains the operating system and configuration files for the router.

Explanation:

Here are two statements that correctly describe a router memory type and its contents:

1. Router Memory Type: RAM (Random Access Memory)
  Its Contents: RAM stores the running configuration, routing tables, and packet buffers. It is a volatile memory, which means the contents are lost when the router is powered off or restarted.

2. Router Memory Type: NVRAM (Non-Volatile Random Access Memory)
  Its Contents: NVRAM stores the startup configuration, which is used when the router boots up. As a non-volatile memory, its contents are retained even when the router is powered off or restarted.

Learn more on NVRAM here : brainly.in/question/3839879

#SPJ11