True. According to the statement, the flat cable assembly shall consist of 2, 3 or 4 conductors. Conductors are the wires or cables that conduct electricity through a circuit or system.
In this case, the flat cable assembly is designed to have either two, three, or four conductors, which means that it can carry electrical signals or power through these wires. Flat cable assemblies are commonly used in electronic devices or systems where space is limited, and a flat, flexible cable is required. They are often used in applications such as computers, printers, televisions, and medical equipment. The number of conductors in a flat cable assembly can affect the performance and capabilities of the device or system that it is used in. Therefore, it is essential to follow the specifications and requirements stated in the statement to ensure that the flat cable assembly meets the necessary standards and functions correctly.According to the statement, the flat cable assembly shall consist of 2, 3 or 4 conductors. Conductors are the wires or cables that conduct electricity through a circuit or system.
learn more about circuit here
https://brainly.com/question/21505732
#SPJ11
Assertion
The compressive strength of a typical brittle material is significantly higher than its tensile strength.
Reason
In compression force between the molecules increases.
The compressive strength of a typical brittle material is significantly higher than its tensile strength.a. Both Assertion and Reason are correct and Reason is the correct explanation for Assertionb. Both Assertion and Reason are correct but Reason is not the corect explanation for Assertionc. Assertion is correct but Reason is incorrectd. Both Assertion and Reason are incorrect
The Assertion mentioned in the question is that the compressive strength of a typical brittle material is significantly higher than its tensile strength.
This statement is correct because brittle materials are those materials that break easily upon the application of a force. Brittle materials do not have any plastic deformation region and have a limited range of elasticity.
Due to this, when a compressive force is applied to a brittle material, it tends to resist the force and does not break easily.
On the other hand, when a tensile force is applied to a brittle material, it tends to break easily as it does not have the ability to stretch.
However, the Reason mentioned in the question, which is not correct, states that the compressive forces act more uniformly across the cross-section of a brittle material than tensile forces.
This statement is not true because the distribution of compressive and tensile forces across the cross-section of a brittle material is similar.
Therefore, the correct option is C, where the Assertion is correct, but the Reason is incorrect.
To know more about compressive strength here
https://brainly.com/question/15230572
#SPJ11
The assertion in the question is that a typical brittle material has a compressive strength that is much greater than its tensile strength.
This assertion is true because brittle materials are ones that shatter easily when pressure is applied. Materials that are brittle have a small elastic range and no plastic deformation zone.
Because of this, brittle materials have a tendency to resist compressive forces and do not break easily.
A brittle material, on the other hand, is incapable of stretching, thus when a tensile force is applied to it, it tends to break quickly.
The Reason given in the question, which is incorrect, claims that compressive forces behave more evenly across a brittle material's cross-section than tensile forces do.
This is untrue because brittle materials have similar distributions of compressive and tensile forces across their cross-sections.
The right response is therefore C, where the Assertion is true but the Reason is false.
learn more about compressive strength here:
https://brainly.com/question/13620639
#SPJ11
A 2 Kg rock is dropped off a cliff with a height of 20 m. What is the speed of the rock at the bottom of the hill?
The speed of the rock at the bottom of the cliff can be calculated using the equation for gravitational potential energy: PE = mgh, where m is the mass of the rock (2 Kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the cliff (20 m).
PE = mgh
PE = 2 Kg x 9.8 m/s^2 x 20 m
PE = 392 J
All of the potential energy at the top of the cliff is converted to kinetic energy at the bottom, so we can use the equation for kinetic energy to find the speed of the rock at the bottom of the cliff: KE = 1/2mv^2, where v is the speed of the rock.
KE = 1/2mv^2
KE = 1/2 x 2 Kg x v^2
KE = v^2
We can now set the potential energy at the top of the cliff equal to the kinetic energy at the bottom:
PE = KE
mgh = v^2
Solving for v, we get:
v = sqrt(2gh)
v = sqrt(2 x 9.8 m/s^2 x 20 m)
v = sqrt(392)
v = 19.8 m/s
Therefore, the speed of the rock at the bottom of the cliff is approximately 19.8 m/s.
To calculate the speed of the 2 kg rock at the bottom of the cliff, we can use the following equation:
v^2 = u^2 + 2as
where:
v = final speed
u = initial speed (0 m/s, since the rock is dropped)
a = acceleration due to gravity (9.81 m/s^2)
s = height of the cliff (20 m)
v^2 = 0^2 + 2(9.81)(20)
v^2 = 392.4
v = √392.4
v ≈ 19.81 m/s
So, the speed of the rock at the bottom of the cliff is approximately 19.81 m/s.
To know more about Equation click here .
brainly.com/question/29657983
#SPJ11
PLEASE HELP ME ANSWER THIS QUESTION
“But Flynn preceded Casey, as did also Jimmy Blake,
And the former was a lulu and the latter was a cake;
So upon that stricken multitude grim melancholy sat,” (lines 9–11)
What does the figurative language in these lines emphasize?
A. that the crowd thinks Flynn and Blake are poor ballplayers
B. that Flynn and Blake will both hit the ball successfully
C. that there is a large, noisy crowd at the ballpark
D. that the crowd compares ballplayers to cake
The figurative language in these lines emphasizes the contrast between Flynn and Casey. The use of the similes "lulu" and "cake" to describe Flynn and Blake respectively highlights their success and skill as ballplayers, while also emphasizing the contrast with Casey, who is described as a "strikeout." The phrase "stricken multitude" suggests that the crowd is disappointed by Casey's poor performance and the contrast with the previous successful batters. Therefore, option A, B, and C are not correct. Option D is also not correct as the figurative language is not meant to compare ballplayers to cake, but rather to emphasize their success or lack thereof.
The figurative language in these lines emphasizes the stark contrast between the two previous batters, Flynn and Casey.
The phrase "preceded Casey" implies that Casey is the next batter, and the description of Flynn as a "lulu" (meaning outstanding or remarkable) and Blake as a "cake" (meaning easy or ordinary) highlights the difference in skill or ability between them.
The phrase "upon that stricken multitude grim melancholy sat" suggests that the crowd is feeling a sense of disappointment or despair, perhaps because of the failure of previous batters or the anticipation of the upcoming at-bat.
Therefore, option A, B, and D are not correct. The correct answer is option C, which suggests that there is a large, somber crowd at the ballpark.
Explain how the conservation laws apply to the bola as its configuration changes.
As the bola is thrown, its configuration changes, and these conservation laws apply to the system- Conservation of momentum, Conservation of energy, Conservation of angular momentum.
Conservation laws are fundamental principles in physics that state that certain properties of a system remain constant under certain conditions. The conservation laws that are most relevant to the bola are the conservation of momentum, conservation of energy, and conservation of angular momentum.
The bola is a simple weapon consisting of two weights attached to the ends of a rope or cord. As the bola is thrown, its configuration changes, and these conservation laws apply to the system.
Conservation of momentum:
The momentum of the bola is conserved as it moves through the air. Momentum is a vector quantity, which means it has both magnitude and direction. When the bola is thrown, it has a certain momentum in a particular direction. As the bola moves through the air, its momentum remains constant, assuming there are no external forces acting on it. When the bola strikes its target, the momentum is transferred to the target, which experiences a force that causes it to move.
Conservation of energy:
The total energy of the bola is conserved throughout its flight. The bola has both kinetic energy (due to its motion) and potential energy (due to its position in the gravitational field). As the bola moves through the air, its kinetic energy increases while its potential energy decreases, but the total energy remains constant. When the bola strikes its target, some of its energy is transferred to the target, causing it to move.
Conservation of angular momentum:
The bola also possesses angular momentum due to its rotation as it moves through the air. Angular momentum is a measure of the rotational motion of an object. As the bola is thrown, it starts to rotate, and this rotation continues as it moves through the air.
The angular momentum of the bola is conserved, meaning that the rate of rotation remains constant as long as there are no external torques acting on the system. When the bola strikes its target, the angular momentum is transferred to the target, causing it to rotate.
In summary, the conservation laws of momentum, energy, and angular momentum apply to the bola as it changes configuration during its flight. These laws help to explain the behavior of the bola and can be used to predict how it will move and transfer energy and momentum to its target.
learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
In a Camber airfoil, the Center of Pressure (CP)a.) moves to the rear of the wing at low AOAb.) moves backward as AOA increases c.) moves forward as AOA increases d.) both a and c
In a cambered airfoil, the Center of Pressure (CP) c.) moves forward as Angle of Attack (AOA) increases.
In a Camber airfoil, the centre of pressure (CP) is the point on the airfoil where the total aerodynamic force can be considered to act. The position of the CP changes with the angle of attack (AOA) of the airfoil.
At low AOA, the CP is located towards the front of the airfoil. As the AOA increases, the CP moves towards the rear of the airfoil. However, as the AOA continues to increase, the CP eventually moves towards the front of the airfoil again.
This means that the CP moves forward as AOA increases in a Camber airfoil. Therefore, the correct answer is c) moves forward as AOA increases.
To learn more about cambered airfoil, refer:-
https://brainly.com/question/16046343
#SPJ11
What is the minimal force needed to overcome static friction in the first experiment?
The force that opposes an object's motion while it is stationary or not moving in relation to another object or surface is called static friction. The amount of static friction is influenced by a number of variables, such as the coefficient of friction between the materials, the normal force, and the roughness of the surfaces in contact.
You would need to give more specifics, such as the materials used, the surfaces in contact, the angle of the surfaces, and any other pertinent information, in order to establish the minimal force required to overcome static friction in a specific experiment.
Normally, observations or calculations based on the particular conditions and characteristics of the experiment are required to ascertain the minimal force required to overcome static friction in a given experiment. This may entail the use of tools like force gauges or friction testers, as well as the consideration of elements like the contact area, the weight of the involved items, and the properties of the materials in contact.
To know more about force
https://brainly.com/question/12834542
#SPJ4
emission nebulae produce ____________ spectra. group of answer choices thermal continuous emission absorption dark
Emission nebulae produce emission spectra. These spectra are characterized by bright, colorful lines that correspond to the specific wavelengths of light that the content loaded in the nebula is emitting.
This is in contrast to absorption spectra, which are produced when light from a source passes through a cooler, less dense gas or material, and certain wavelengths are absorbed, resulting in dark lines. Emission spectra are the patterns of light emitted by atoms or molecules when they are excited or heated. When energy is added to an atom or molecule, such as by heating it or by exposing it to an electrical discharge, its electrons become excited and move to higher energy levels. As these electrons fall back down to lower energy levels, they release energy in the form of light. Each element or molecule has a unique set of energy levels and corresponding wavelengths of light that it can emit. Therefore, the emission spectrum of a substance is like a fingerprint that can be used to identify it. Emission spectra are important in many fields, including astronomy, chemistry, and physics. In astronomy, scientists use the emission spectra of stars to determine their composition and temperature. In chemistry, emission spectra are used to identify unknown substances and to study the behavior of molecules. In physics, emission spectra provide insights into the quantum mechanics of atoms and molecules.
Learn more about emission spectra here:
https://brainly.com/question/18907409
#SPJ11
Emission nebulae are vast regions of ionized gas that emit light in a variety of colors.
These nebulae are formed due to the intense radiation emitted by nearby stars, which ionizes the gas in the nebula and causes it to emit light.
The light emitted by emission nebulae produces a distinct type of spectrum known as an emission spectrum.
An emission spectrum is produced when an object emits light at specific wavelengths or frequencies. In the case of emission nebulae, the ionized gas in the nebula emits light at specific wavelengths, depending on the elements present in the gas.
Each element emits light at a unique set of wavelengths, which produces a unique emission spectrum.
The emission spectrum of an emission nebula is characterized by bright lines at specific wavelengths.
These lines are called emission lines and are produced when electrons in the ionized gas transition from a higher energy level to a lower energy level, emitting light at a specific wavelength.
In summary, emission nebulae produce an emission spectrum characterized by bright emission lines at specific wavelengths. This spectrum provides valuable information about the composition and physical properties of the ionized gas in the nebula.
To know more about Emission nebulae here
https://brainly.com/question/11539002
#SPJ11
what is the intensity (in w/m2) of an electromagnetic wave with a peak electric field strength of 155 v/m?
the intensity of the electromagnetic wave with a peak electric field strength of 155 V/m is approximately 1.328 W/m².
The intensity of an electromagnetic wave is proportional to the square of its electric field strength. Therefore, to calculate the intensity (I), we can use the following formula:
I = (electric field strength)^2 / 377
where 377 is the impedance of free space.
Substituting the given value of peak electric field strength (155 v/m), we get:
I = (155)^2 / 377
I = 63.3 w/m2
Therefore, the intensity of the electromagnetic wave with a peak electric field strength of 155 v/m is 63.3 w/m2. calculate the intensity of an electromagnetic wave. To find the intensity (in W/m²) of an electromagnetic wave with a peak electric field strength (E) of 155 V/m, you can use the following formula:
Intensity (I) = (1/2) × ε₀ × c × E²
Here,
ε₀ = vacuum permittivity = 8.854 × 10⁻¹² F/m
c = speed of light in vacuum = 3 × 10⁸ m/s
E = peak electric field strength = 155 V/m
Now, let's plug in the values and calculate the intensity:
I = (1/2) × (8.854 × 10⁻¹² F/m) × (3 × 10⁸ m/s) × (155 V/m)²
I = (1/2) × (8.854 × 10⁻¹² F/m) × (3 × 10⁸ m/s) × (24025 V²/m²)
I = 0.5 × (8.854 × 10⁻¹² F/m) × (3 × 10⁸ m/s) × (24025 V²/m²)
I ≈ 0.5 × 2.656 × 10⁻³ W/m²
I ≈ 1.328 W/m²
So, the intensity of the electromagnetic wave with a peak electric field strength of 155 V/m is approximately 1.328 W/m².
Learn more about electromagnetic here
https://brainly.com/question/17057080
#SPJ11
20. A 0.254-m diameter circular saw blade rotates at a constant angular speed of 117 rad/s. What is the tangential speed of the tip of a saw tooth at the edge of the blade?
A) 29.7 m/s
B) 14.9 m/s
C) 9.46 m/s
D) 7.45 m/s
E) 2.17 m/s
The tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
To find the tangential speed of the tip of a saw tooth at the edge of the blade, we can use the following formula:
tangential speed = radius x angular speed
The radius of the circular saw blade is half of its diameter, which is 0.254/2 = 0.127 m. The angular speed is given as 117 rad/s. Thus, we can calculate the tangential speed as:
tangential speed = 0.127 m x 117 rad/s = 14.859 m/s
Rounding to two significant figures, we get the answer as 14.9 m/s, which is option B. Therefore, the tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
learn more about tangential speed Refer: https://brainly.com/question/17446849
#SPJ11
52. What is the direction of the disk's angular velocity?
A) to the left
B) to the right
C) into the paper (away from you)
D) out of the paper (toward you)
E) It varies from point to point on the disk.
The direction of the disk's angular velocity depends on the direction of rotation and the position of the point on the disk. At any given point on the disk, the direction of the angular velocity is perpendicular to the plane of the disk and tangent to the circular path of that point. E) It varies from point to point on the disk.
To determine the direction of the disk's angular velocity, we can use the right-hand rule. The right-hand rule states that if you curl the fingers of your right hand in the direction of rotation, your thumb will point in the direction of the angular velocity vector.
1. Imagine the disk rotating in a specific direction (e.g., clockwise or counterclockwise).
2. Place your right hand over the disk with your fingers pointing in the direction of rotation.
3. Curl your fingers in the direction of rotation.
4. Observe the direction in which your thumb is pointing.
If the disk is rotating clockwise, your thumb will point into the paper (away from you), so the answer would be C) into the paper (away from you). If the disk is rotating counterclockwise, your thumb will point out of the paper (toward you), and the answer would be D) out of the paper (toward you). The direction of the disk's angular velocity does not vary from point to point on the disk, as it is determined by the overall direction of rotation.
More on angular velocity: https://brainly.com/question/13934235
#SPJ11
(326-2) Type IGS cable is a factory assembly of one or more conductors, each individually insulated and enclosed in a loose fit nonmetallic flexible conduit as an integrated gas spacer cable rated _____ volts.
The (326-2) Type IGS cable is an excellent choice for high-voltage applications where flexibility and reliability are key factors. It is particularly well-suited for use in power transmission and distribution applications where it can help to improve system efficiency and reduce maintenance costs.
The (326-2) Type IGS cable is a factory assembly of one or more conductors, each individually insulated and enclosed in a loose fit nonmetallic flexible conduit. This type of cable is specifically designed as an integrated gas spacer cable and is rated for use up to 35,000 volts.
The nonmetallic conduit used in the IGS cable provides a high degree of flexibility and allows for ease of installation, particularly in challenging environments. Additionally, the integrated gas spacer technology provides enhanced electrical performance by minimizing electrical stress, reducing the risk of corona discharge, and improving the overall reliability of the cable.
To learn more about Voltage :
https://brainly.com/question/1176850
#SPJ11
newer radar systems now use the vhf and uhf bands in order to detect stealthy aircraft. if a radar system operates with a frequency of 405 mhz (in the uhf band), what minimum thickness of coating (in cm) is needed to render an aircraft invisible to this radar band
To make an aircraft invisible to a radar system operating at 405 MHz, a minimum thickness of 18.5 cm of coating would be required.
How to determine minimum thickness?The minimum thickness of coating needed to render an aircraft invisible to a radar system depends on the wavelength of the radar signal and the properties of the coating material. The general principle is that the coating should be at least a quarter of the wavelength of the radar signal in thickness.
The wavelength of a radar signal can be calculated using the formula:
λ = c / f
where λ is the wavelength in meters, c is the speed of light (299,792,458 m/s), and f is the frequency in Hz.
For a radar system operating at a frequency of 405 MHz (405 x 10⁶ Hz), the wavelength of the signal is:
λ = 299,792,458 m/s / (405 x 10⁶ Hz) = 0.739 meters
To render an aircraft invisible to this radar band, the minimum thickness of the coating should be a quarter of the wavelength, or:
t = λ / 4 = 0.739 meters / 4 = 0.185 meters = 18.5 cm
Therefore, a minimum thickness of 18.5 cm of coating would be needed to render an aircraft invisible to a radar system operating at a frequency of 405 MHz.
Find out more on radar systems here: https://brainly.com/question/17192382
#SPJ1
(332-10(1)) Flat cable assemblies shall be permitted only as branch circuits to supply suitable tap devices for lighting, small power, or small appliance loads.(True/False)
True. According to the National Electrical Code (NEC), flat cable assemblies are permitted as branch circuits to supply suitable tap devices for lighting, small power, or small appliance loads.
Flat cable assemblies are a type of wiring system that consists of multiple conductors arranged in parallel within a flat, flexible insulating material. They are designed to provide efficient and organized connections in electrical circuits.
These assemblies can be utilized in various applications, including lighting circuits, where they distribute power to different light fixtures, and small power circuits, which provide power for devices like computers, printers, and other office equipment. Flat cable assemblies are also used in small appliance circuits, which supply power to household appliances like refrigerators, washing machines, and air conditioners.
In summary, flat cable assemblies are allowed as branch circuits, according to the NEC, for the purpose of supplying power to suitable tap devices in lighting, small power, or small appliance loads. These assemblies offer efficient power distribution and organization within electrical circuits, making them a suitable choice for these applications.
learn more about circuits here
https://brainly.com/question/21505732
#SPJ11
Question 26
A major part of the Earth Summit was to:
a. stabilize concentrations of greenhouse gases at 1990 levels
b. fine nations that did not comply with the accord
c. conduct joint national research about the environment
d. decrease the amount of fossil fuel consumption
A major part of the Earth Summit was to stabilize concentrations of greenhouse gases at 1990 levels.
Stabilize Concentrations of Greenhouse Gases at 1990 Levels: One of the main goals of the Earth Summit was to stabilize concentrations of greenhouse gases in the atmosphere at 1990 levels. This was done by encouraging countries to reduce their emissions of greenhouse gases, such as carbon dioxide and methane, through the use of renewable energy sources and energy efficiency improvements. This would help to reduce the rate of global warming and address climate change.
To learn more about Greenhouse Gases click here https://brainly.com/question/23268735
#SPJ11
possibly driven by acceleration from the snapping (breaking) of magnetic fields near the sun's surface.
Your question is about acceleration possibly driven by the snapping of magnetic fields near the sun's surface.
The acceleration you mentioned is likely related to solar flares, which are powerful bursts of energy caused by the snapping and reconnection of magnetic fields near the sun's surface.
Solar flares occur when magnetic energy built up in the sun's atmosphere is suddenly released, causing a rapid increase in brightness and a powerful burst of radiation.
This process involves the snapping and reconnection of magnetic field lines, which accelerates charged particles and results in the emission of energy across the electromagnetic spectrum. The strength of a solar flare depends on the complexity and intensity of the magnetic field involved.
In summary, the acceleration you referred to is associated with solar flares and is driven by the breaking and reconnection of magnetic fields near the sun's surface.
To know more about electromagnetic spectrum click on below link:
https://brainly.com/question/15576247#
#SPJ11
Acceleration is a term used to describe the increase in speed of an object over time. In the case of solar activity, it is believed that the breaking of magnetic fields near the sun's surface could be a driving force behind this acceleration.
The magnetic field of the sun plays a significant role in the behavior of the sun and its interactions with the solar system. When the magnetic fields on the surface of the sun become twisted or tangled, they can snap and release a tremendous amount of energy in the form of solar flares or coronal mass ejections. These events can send charged particles hurtling toward Earth at incredible speeds. The acceleration of these particles is largely due to the magnetic fields they encounter as they travel through space. These magnetic fields can cause the particles to be deflected or redirected, causing them to move faster or slower depending on the orientation of the magnetic field. In some cases, the particles can be accelerated to nearly the speed of light, creating powerful bursts of energy that can disrupt satellites and other technology. In summary, the breaking of magnetic fields near the sun's surface can drive the acceleration of charged particles, which can then cause disturbances in the solar system. Understanding this process is crucial for predicting and mitigating the effects of solar storms on Earth and other planets in our solar system.
Ledran more about satellites here: https://brainly.com/question/3917046
#SPJ11
Question 79 Marks: 1 The turbidity of water to be treated by slow sand filtration should not exceedChoose one answer. a. 50 NTU b. 25 NTU c. 10 NTU d. 30 NTU
10 NTU. Turbidity is a measure of the cloudiness or haziness of water, caused by suspended particles such as sediment, algae, and other contaminants. Slow sand filtration is a method of purifying water by passing it through a bed of sand and other natural materials, which act as a natural filter.
In order for this filtration process to be effective, the water must not exceed a certain level of turbidity. A turbidity level of 10 NTU or less is considered safe for slow sand filtration, as higher levels of turbidity can clog the filter bed and reduce its effectiveness. Therefore, it is important to monitor and control the turbidity of the water being treated through various methods such as sedimentation, coagulation, and flocculation, in order to ensure effective filtration and safe drinking water for communities.
learn more about Turbidity here: brainly.com/question/26612834
#SPJ11
30. Determine the tangential acceleration of the point that is 0.2 m from the center.
A) 0.4 m/s2
B) 2.0 m/s2
C) 4.0 m/s2
D) 10 m/s2
E) zero m/s2
This means that the point is not moving, so the tangential acceleration is zero (answer E).
The tangential acceleration of a point is the component of the acceleration vector that is tangent to the circular path at that point. In this case, the point is located 0.2 m from the center, so we need to use the formula for tangential acceleration:
at = rα
where at is the tangential acceleration, r is the distance from the center, and α is the angular acceleration. Since the problem does not provide information about the angular acceleration, we cannot calculate the tangential acceleration directly. However, we can use the fact that tangential acceleration and centripetal acceleration are related through the following equation:
ac = rω^2
where ac is the centripetal acceleration, r is the distance from the center, and ω is the angular velocity. Since we know that the point is moving in a circular path, we can assume that it has a constant angular velocity, which means that the centripetal acceleration is also constant. Therefore, we can use the above equation to find the centripetal acceleration and then convert it to tangential acceleration using the formula at = ac cosθ, where θ is the angle between the tangential and centripetal accelerations.
Substituting the given values, we get:
ac = (0.2 m)(ω^2)
Since we do not know the value of ω, we need to find it using the formula for acceleration:
a = rα = r(dω/dt)
where a is the linear acceleration, r is the distance from the center, and α is the angular acceleration. Since the point is moving in a circular path with a constant speed, its linear acceleration is zero. Therefore, we have:
0 = (0.2 m)(dω/dt)
Solving for ω, we get:
ω = 0 rad/s
This means that the point is not moving, so the tangential acceleration is zero (answer E).
learn more about tangential here
https://brainly.com/question/14993737
#SPJ11
Air Conditioning: An air conditioner nameplate indicates the minimum circuit ampacity of 43 ampere and maximum fuse size of 60 ampere. What is the minimum size branch circuit conductor and the maximum size overcurrent protection device?(422.13)
The minimum size branch circuit conductor is 8 AWG, and the maximum size overcurrent protection device is 60 ampere.
To determine the minimum size branch circuit conductors and the maximum size overcurrent protection device for an air conditioner with a minimum circuit ampacity of 43 ampere and maximum fuse size of 60 ampere, follow these steps:
1. Minimum size branch circuit conductor:
- Refer to the National Electrical Code (NEC) Table 310.16 for allowable ampacities of insulated conductors.
- Find the conductor size that can handle at least 43 ampere. In this case, a conductor with a size of 8 AWG (American Wire Gauge) is suitable, as it has an allowable ampacity of 50 ampere.
2. Maximum size overcurrent protection device:
- The air conditioner nameplate states the maximum fuse size is 60 ampere.
- You can use a 60-ampere fuse or breaker as the maximum size overcurrent protection device.
learn more about circuit conductors Refer: https://brainly.com/question/28269880
#SPJ11
the movement of water uphill in the hydrologic cycle requires
The movement of water uphill in the hydrologic cycle requires energy input in the form of solar radiation. '
The hydrologic cycle is the continuous process of water cycling through the earth's surface, atmosphere, and underground. The cycle involves various processes such as evaporation, condensation, precipitation, infiltration, and runoff. Water moves uphill during the cycle through the process of evaporation and transpiration, where water is converted from a liquid state to a gas (water vapor) and rises into the atmosphere due to solar radiation energy.
This process is energetically favorable as it requires solar energy to overcome the gravitational potential energy and the energy needed to break the hydrogen bonds between water molecules.
Learn more about the hydrologic cycle
https://brainly.com/question/13554728
#SPJ4
The gauge pressure of a pneumatic cylinder reads 30 lb/in.2 when the volume is 50 in.3. The cylinder is compressed until the gauge reads 80 lb/in.2. What is the volume in the cylinder after the gas is compressed? (Atmospheric Pressure: 14.7 psi)
A. 23.6 in^3
B. 10 in^3
C. 18.75 in^3
D. 18.75 psi
E. 21 psi
The volume in the cylinder after the gas is compressed is 68.75 in³, which is closest to option A (23.6 in³).
To solve this problem, we can use Boyle's law, which states that the product of the pressure and volume of a gas is constant as long as the temperature remains constant. We can express this law using the following formula:
P₁V₁ = P₂V₂
Where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.
First, we need to convert the atmospheric pressure from psi to lb/in² by multiplying it by 144 (since there are 144 square inches in a square foot):
14.7 psi * 144 = 2116.8 lb/in²
Next, we can use the formula to solve for the final volume:
30 lb/in² * 50 in³ = 80 lb/in² * V₂
V₂ = (30 lb/in² * 50 in³) / 80 lb/in²
V₂ = 18.75 in³
Finally, we need to add the initial volume to the final volume to get the total volume after compression:
V_total = V₁ + V₂ = 50 in³ + 18.75 in³ = 68.75 in³
Closest choice is option A.
To know more about gauge pressure, here
brainly.com/question/14356467
#SPJ1
An organ pipe is 151cm\; cm long. The speed of sound in air is 343 m/s. Part A: What are the fundamental and first three audible overtones if the pipe is closed at one end? What are the fundamental and first three audible overtones if the pipe is open at both ends? Express awnsers to 3 signiicant figures seperated by commas
For an organ pipe that is closed at one end and is 151 cm long:
Part A:
Fundamental frequency (first harmonic) = (speed of sound) / (2 x length of pipe)
= 343 / (2 x 1.51)
= 113.91 Hz
First overtone (second harmonic) = 3 x fundamental frequency
= 3 x 113.91
= 341.73 Hz
Second overtone (third harmonic) = 5 x fundamental frequency
= 5 x 113.91
= 569.55 Hz
Third overtone (fourth harmonic) = 7 x fundamental frequency
= 7 x 113.91
= 797.37 Hz
For an organ pipe that is open at both ends and is 151 cm long:
Fundamental frequency (first harmonic) = (speed of sound) / (2 x length of pipe)
= 343 / (2 x 1.51)
= 113.91 Hz
First overtone (second harmonic) = 2 x fundamental frequency
= 2 x 113.91
= 227.82 Hz
Second overtone (third harmonic) = 3 x fundamental frequency
= 3 x 113.91
= 341.73 Hz
Third overtone (fourth harmonic) = 4 x fundamental frequency
= 4 x 113.91
= 455.64 Hz
Learn more about organ pipe here:
https://brainly.com/question/24188759
#SPJ11
The fundamental frequency (first harmonic) of a closed-end pipe is given by:
f1 = v/4L
where v is the speed of sound in air and L is the length of the pipe.
For a closed-end pipe with L = 151 cm and v = 343 m/s, we have:
f1 = 343/(4 x 151/100) = 571 Hz
The frequency of the first overtone (second harmonic) is:
f2 = 2f1 = 2 x 571 = 1142 Hz
The frequency of the second overtone (third harmonic) is:
f3 = 3f1 = 3 x 571 = 1713 Hz
The frequency of the third overtone (fourth harmonic) is:
f4 = 4f1 = 4 x 571 = 2284 Hz
For an open-end pipe, the fundamental frequency is given by:
f1 = v/2L
where L is the length of the pipe.
For an open-end pipe with L = 151 cm and v = 343 m/s, we have:
f1 = 343/(2 x 151/100) = 1136 Hz
The frequency of the first overtone (second harmonic) is:
f2 = 2f1 = 2 x 1136 = 2272 Hz
The frequency of the second overtone (third harmonic) is:
f3 = 3f1 = 3 x 1136 = 3408 Hz
The frequency of the third overtone (fourth harmonic) is:
f4 = 4f1 = 4 x 1136 = 4544 Hz
Therefore, for a closed-end pipe with a length of 151 cm, the fundamental frequency is 571 Hz, and the first three overtones are 1142 Hz, 1713 Hz, and 2284 Hz.
For an open-end pipe with a length of 151 cm, the fundamental frequency is 1136 Hz, and the first three overtones are 2272 Hz, 3408 Hz, and 4544 Hz.
To know more about fundamental frequency :
https://brainly.com/question/29264927
#SPJ11
How can employees use a code of ethics?
OA. By using it to learn how to negotiate a pay increase
B. By using it to develop new legal responsibilities
C. By referring to it for examples of how to apply ethical standards
OD. By using it to write computer programs that make ethical choices
Answer:
for this, I would say D
Explanation:
Because instead of deciding what the ethics themselves are, you should set the ethics and create a system that can act on those ethics themselves.
Please give brainliest, have a great night!
The ampacity of the nine current-carrying No. 10 THW conductors installed in a 20 inch long raceway is_____.
The ampacity of the nine current-carrying No. 10 THW conductors installed in a 20-inch long raceway is 21 amperes.
To determine the ampacity of the nine current-carrying No. 10 THW conductors installed in a 20-inch long raceway, we can use the NEC ampacity tables.
First, we need to determine the ambient temperature and the temperature rating of the conductors.
Assuming a typical ambient temperature of 30°C (86°F) and a temperature rating of 90°C for the THW conductors, we can refer to NEC Table 310.15(B)(16) for the ampacity rating.
According to NEC Table when there are nine current-carrying conductors in a raceway, we must apply a derating factor of 80%.
Finally, according to NEC Table 310.15(B)(2)(c), for a 20-inch raceway, we must apply a derating factor of 80%. Applying these derating factors to the ampacity rating of 30 amps gives us a final ampacity of:
30 A x 0.8 x 0.8 = 19.2 A
Therefore, the ampacity of the nine current-carrying No. 10 THW conductors installed in a 20-inch long raceway is 19.2 amps.
Learn more about ampacity at
https://brainly.com/question/30312780
#SPJ4
There are ~ 1080 particles in the universe (depending on who you ask; I haven't counted). If each particle chooses a 150 digit prime, is it at all likely that two will pick the same prime? Explain why or why not. Note: Use the prime number theorem to estimate how many 150 digit primes there are.
No, it is not likely that two particles will pick the same prime. According to the prime number theorem, there are approximately 2¹⁵⁰ (approximately 1.3 * 10⁴⁵) 150 digit primes.
What is prime number theorem?The Prime Number Theorem is a theorem in number theory that states that the number of prime numbers less than or equal to a given integer n is approximately equal to n/ln(n). This theorem is important because it provides an estimate of the prime numbers and can be used to study the distribution of prime numbers in the large numbers. The theorem also provides a way to estimate the probability of a given number being prime. The prime number theorem has wide applications in mathematics and computer science.
Since the number of particles is much lower than the number of primes, the chance of two particles picking the same prime is incredibly small.
To learn more about prime number theorem
https://brainly.com/question/30396711
#SPJ4
A diffraction grating has 45,000 slits/cm. What is the distance between adjacent slits?.
The distance between adjacent slits in this diffraction grating is approximately 2.22 × 10^-3 meters or 2.22 micrometers.
The distance between adjacent slits in a diffraction grating can be found using the formula:
d = 1/N
where d is the distance between adjacent slits and N is the number of slits per unit length. In this case, N = 45,000 slits/cm. Converting to slits/m, we have:
N = 45,000 slits/cm x (1 m/100 cm) = 450 slits/m
Substituting into the formula, we get:
d = 1/N = 1/450 slits/m ≈ 2.22 × 10^-3 m/slit
To know more about slits refer here
https://brainly.com/question/30547515#
#SPJ11
Question 5 Marks: 1 Excessive condensation, corrosion, and mildew occur when the relative humidity exceedsChoose one answer. a. 20 percent b. 40 percent c. 80 percent d. 60 percent
The correct answer is c. 80 percent. When the relative humidity exceeds 80 percent, the air is saturated with moisture and cannot hold any more water vapor.
This leads to excessive condensation on surfaces, which can promote the growth of mildew and cause corrosion over time. It is important to monitor humidity levels in indoor spaces to prevent these issues.
Excessive condensation, corrosion, and mildew occur when the relative humidity exceeds 60 percent (option d).
A humidity sensor is a device that detects, measures, and reports the relative humidity (RH) of air or determines the quantity of water vapor present in a gas mixture (air) or pure gas.
To know more about Humidity click here .
brainly.com/question/22069910
#SPJ11
33. A bicycle with wheels of radius 0.4 m travels on a level road at a speed of 8 m/s. What is the angular speed of the wheels?
A) 10 rad/s
B) 20 rad/s
C) (p/10) rad/s
D) (10p) rad/s
E) (20/p) rad/s
The angular speed of the wheels is 20 rad/s. When a bicycle with wheels of radius 0.4 m travels on a level road at a speed of 8 m/s.
The linear speed of a point on the edge of a wheel is equal to the product of the angular speed and the radius of the wheel. Therefore, we can use the formula:
linear speed = angular speed x radius
To find the angular speed, we can rearrange this formula as:
angular speed = linear speed / radius
Plugging in the given values, we get:
angular speed = 8 m/s / 0.4 m = 20 rad/s
Therefore, the angular speed of the wheels is 20 rad/s, the answer is (B) 20 rad/s.
learn more about angular speed Refer: https://brainly.com/question/9684874
#SPJ11
Question 53 Marks: 1 The second step of the combustion process in an incinerator requires a high temperature of at leastChoose one answer. a. 1500 to 1600 degrees F b. 1500 to 1800 degrees F c. 1900 to 2000 degrees F d. 1800 to 1900 degrees F
The second step of the combustion process in an incinerator requires a high temperature of at least 1500 to 1800 degrees F. So, the correct answer is option b.
The correct answer is d. 1800 to 1900 degrees F. The second step of the combustion process in an incinerator requires a high temperature to ensure the complete combustion of the waste materials. This temperature range is necessary to break down any remaining organic matter and convert it into ash and gases.
Combustion, or combustion, is a high-temperature exothermic redox reaction between a fuel and an oxidizer (usually atmospheric oxygen) that produces oxidized, mostly gaseous products in a mixture called smoke. Combustion does not always lead to a fire because the flame is only seen when the burning material has evaporated, but when this happens, the flame is indicative of a reaction. The energy that must be overcome to initiate combustion, and the heat produced by the flame can provide enough energy for the reaction to take place.
Learn more about the combustion process:
brainly.com/question/13153771
#SPJ11
HELP 100 POINTS Why don't birds get electrocuted when they land on an electric wire?
Answer: There are not able to be electricity
Explanation: Essentially, this means that the electricity is able to pass through the birds without damaging them.
The maximum stress a bone can experience before it fractures is around 108N/m2. How much stress could the bone experience if it were twice as large in diameter?
The stress would be one-fourth as large.
The maximum stress would be no different.
The stress would be half as large.
The stress would be twice as large.
The stress would be one-fourth as large if stress could the bone experience if it were twice as large in diameter.
If the diameter of the bone were to double, the cross-sectional area would increase by a factor of four (πr²). Therefore, the stress would be distributed over a larger area, resulting in a decrease in stress.
The maximum stress a bone can experience before it fractures is around 108N/m2, so if the diameter were to double, the stress would be one-fourth as large, or around 27N/m2. This is because the stress is inversely proportional to the cross-sectional area. Therefore, the larger the area, the less stress is applied to any one point.
To know more about stress click here:
https://brainly.com/question/31366817
#SPJ11