A 28.0 g sample of N2 is in a rigid 4.50 L container at 32 °C. Calculate the pressure in the flask in torr

Answer:

2. 2.74876 + 13.37 +  3. 48640.1

Explanation:

The chemical formula for sodium sulfide is NaS.

Generally a chemical formula is defined as an expression which shows the elements in a compound and its relative proportions of those elements. If only one atom of a specific type is present in the chemical formula, no subscript is used. And, for atoms that have two or more of a specific type of atom present, a subscript is written after the symbol for that atom.

Na is the symbol for sodium and S is the symbol for sulfide and the both the elements have valency 1. Hence, the symbol for sodium sulfide is NaS.

Learn more about chemical formula from the link given below.

https://brainly.com/question/29031056

#SPJ4

The correct answer is c. Activated carbon is used to control tastes and odors in water. It works by adsorbing organic compounds that contribute to the unpleasant taste and odor.

Turbidity refers to the cloudiness or haziness of water and activated carbon does not have a direct impact on it. Additionally, activated carbon does not kill bacteria, but rather removes certain organic compounds that can provide a food source for bacteria to grow.

Finally, activated carbon does not keep chlorine in suspension, but rather removes it from the water if it is present.
Hi! Activated carbon is used to:
c. Control tastes and odors

To know more about Carbon click here .

brainly.com/question/14272000

#SPJ11

They affect food webs through energy production and agriculture, pollution, habitat destruction, over fishing and hunting.

All the food networks in a single ecosystem make up a food web. Each organism in an ecosystem is a link in a number of food chains. Energy and nutrients can go along different food chains as they move through the ecosystem.

Who eats whom in the wild is described by the food chain. Everything that is alive, from microscopic algae to enormous blue whales, depends on food to thrive. Each food web represents a possible route for nutrients and energy to travel through the ecosystem.

The majority of consumers are people. Energy production, agriculture, pollution, habitat degradation, overfishing, and hunting all have an impact on food webs. Along with population increase, their needs for food and shelter also have an impact on the ecosystems of the land and the sea.

To know more about food web visit:

https://brainly.com/question/18816028

#SPJ1

The stock system name for Cu+ is Copper(I) ion.

In the stock system, the oxidation state or the charge of the metal ion is indicated in Roman numerals in parentheses after the name of the metal. In the case of Copper, the common oxidation states are +1 and +2. When Copper has a +1 charge, it is named a Copper(I) ion, while when it has a +2 charge, it is named a Copper(II) ion.

The stock system is important in identifying the charges and the number of atoms of elements present in a compound. It is commonly used in chemistry and is widely recognized as an essential tool in naming and identifying various compounds.

Learn more about the stock system at https://brainly.com/question/28271409

#SPJ11

Phosphorus makes up about 1% of the human body. It was the first element isolated from a living creature. Phosphorus is an essential element that plays a critical role in various biological processes, including DNA and RNA synthesis, energy metabolism, bone formation, and cellular signaling.

It is a key component of nucleic acids, ATP (adenosine triphosphate), and phospholipids, which are major structural components of cell membranes. Despite its relatively low abundance in the human body, phosphorus is crucial for many physiological functions.Phosphorus was first isolated from a living creature in 1669 by German alchemist Hennig Brand, who extracted it from urine. This discovery marked the first isolation of an element from a living source and laid the foundation for our understanding of phosphorus and its importance in biological systems.

learn more about Phosphorus here:

https://brainly.com/question/17118243

#SPJ11

Starting with 32.0 g of a radioactive substance, 2.0 g remains after four half-lives.

Each half-life of a radioactive substance results in half of the original material remaining. After the first half-life, you would have 1/2 of the original amount remaining, after the second half-life you would have 1/4 remaining, after the third half-life you would have 1/8 remaining, and after the fourth half-life, you would have 1/16 of the original amount remaining.

Therefore, if you have 2.0 g remaining after four half-lives, you can calculate the original amount using the following equation:

2.0 g = (1/16) x original amount

Solving for the original amount, we get:

original amount = 2.0 g x 16 = 32.0 g

To know more about the radioactive substance refer here :

https://brainly.com/question/31765647#

#SPJ11

Mutation testing is a powerful technique for evaluating the effectiveness of test suites in detecting faults in software systems.

It involves introducing small changes or mutations into the code, simulating the effects of real-world errors or bugs, and then running the test suites to see if they are able to identify the mutated code as faulty. By measuring the percentage of mutations that are detected by the test suites, developers can gain insights into the overall quality and effectiveness of their testing practices, and identify areas where improvements are needed.

Overall, mutation testing is an essential tool for ensuring the reliability and robustness of complex software systems. Mutation testing is a structural testing method designed to evaluate and enhance the effectiveness of test suites while estimating the number of faults in systems under test. This approach helps ensure more robust test suites and reliable systems.

To know more about systems click here

brainly.com/question/10969133

#SPJ11

Mutation testing is a structural testing method aimed at assessing and improving the adequacy of test suites, as well as estimating the number of faults present in systems under test.

1. First, the original program, also known as the "base program," is analyzed to identify areas that could potentially have faults or errors.

2. Next, a series of "mutants" are created by making small, deliberate changes to the base program. These changes represent potential faults or errors.

3. The test suite is then run against both the base program and each of the mutants. The goal is to see if the test suite can detect the differences between the base program and the mutants, indicating the presence of a fault.

4. If the test suite is successful in detecting a difference, the mutant is said to be "killed." If the test suite cannot detect a difference, the mutant is said to have "survived."

5. The mutation score is calculated by dividing the number of killed mutants by the total number of mutants. This score represents the effectiveness of the test suite in detecting faults.

6. If the mutation score is low, the test suite may be improved by adding or modifying test cases to better detect the surviving mutants. This process is repeated until the desired level of adequacy is reached.

By performing mutation testing, developers can assess and improve the quality of their test suites, ultimately leading to more robust and reliable software systems.

To know more about "base program" :

https://brainly.com/question/13597551

#SPJ11

There are approximately 2.94 x 10^22 copper atoms in a copper penny with a mass of 3.10g. To calculate the number of copper atoms in a copper penny with a mass of 3.10g, follow these steps:

1. Determine the molar mass of copper: Copper (Cu) has a molar mass of approximately 63.55 g/mol.
2. Convert the mass of the penny into moles: Divide the mass of the penny (3.10g) by the molar mass of copper (63.55 g/mol).
 
Moles of copper = 3.10g / 63.55 g/mol = 0.0488 moles

3. Use Avogadro's number to convert moles to atoms: Avogadro's number is approximately 6.022 x 10^23 atoms/mol. Multiply the moles of copper by Avogadro's number to find the number of copper atoms.

Number of copper atoms = 0.0488 moles * 6.022 x 10^23 atoms/mol = 2.94 x 10^22 atoms

So, there are approximately 2.94 x 10^22 copper atoms in a copper penny with a mass of 3.10g, assuming it is composed of pure copper.

Learn more about copper atoms here:

brainly.com/question/19360889

#SPJ11

The normal eclipses of the Sun and Moon is position of moon between sun and earth and position of moon between sun and earth on a new moon. The correct answer is C) both a and b.

A normal solar eclipse occurs when the Moon passes between the Sun and the Earth, blocking the sunlight and casting a shadow on the Earth's surface. This is described in option A.

A normal lunar eclipse, on the other hand, occurs when the Earth passes between the Sun and the Moon, with the Earth's shadow falling on the surface of the Moon. This can only occur during a full moon, which is described in option B.

Therefore, both options A and B are necessary to explain the normal eclipses of the Sun and Moon. So, the correct option is C)

To know more about normal eclipses:

https://brainly.com/question/4702388

#SPJ4

--The given question is incomplete, the complete question is given

" Which of the following best explains the normal eclipses of the Sun and Moon?

A) position of moon between sun and earth

B) position of moon between sun and earth on a new moon

C) both a and b

D) none of these"--

The compound principal scale formeris a. calcium carbonate

Calcium carbonate is a common substance that is found in various forms such as limestone, marble, and chalk. It is the primary cause of scale formation in water systems, including pipes, boilers, and heat exchangers. When water containing dissolved calcium and bicarbonate ions is heated or experiences a pressure change, the solubility of calcium carbonate decreases, leading to the precipitation of solid calcium carbonate crystals.

These crystals can adhere to surfaces and accumulate over time, forming scale deposits that can negatively impact the efficiency and lifespan of equipment. In contrast, potassium carbonate (b), magnesium sulfate (c), and sodium carbonate (d) are not the principal scale-forming compounds, although they may contribute to scaling under certain conditions. The compound principal scale formeris a. calcium carbonate

learn more about compounds here:

https://brainly.com/question/21983682?

#SPJ11

When the amount of glucose available exceeds the amount needed for immediate energy use, there are two things that can happen to the remaining glucose.

First, the excess glucose can be stored in the liver and muscles as glycogen for later use. Second, if the glycogen stores are already full, the excess glucose can be converted into fat and stored in adipose tissue. This explanation highlights the importance of regulating the amount of glucose in the body to prevent excess storage and potential health complications.

1. Glycogenesis: The excess glucose is converted into glycogen, a polysaccharide, and stored in the liver and muscles for future energy needs.

2. Lipogenesis: When glycogen storage capacity is full, the remaining glucose is converted into fatty acids and stored as triglycerides in adipose tissue (fat cells) for long-term energy storage.

In summary, the two processes that happen to the remaining glucose when the amount available exceeds immediate energy needs are glycogenesis and lipogenesis.

To know more about glucose visit :-

https://brainly.com/question/30102587

#SPJ11

Methane in the presence of air is explosive at concentrations between 5 and 15 percent. So the correct answer is a. 5 and 15 percent.

Methane is a flammable gas that can form explosive mixtures with air when its concentration falls within certain ranges. The Lower Explosive Limit (LEL) is the minimum concentration of methane in air below which it is too lean to burn, and the Upper Explosive Limit (UEL) is the maximum concentration of methane in air above which it is too rich to burn. The explosive range for methane is typically considered to be between 5 and 15 percent by volume in air. This means that if the concentration of methane in air falls within this range, there is a risk of an explosive atmosphere being formed. It is important to take appropriate precautions and follow safety guidelines when working with or around methane or any other flammable gas to prevent accidents and ensure safe operations.

To know more about Methane,

https://brainly.com/question/12645626

#SPJ11

Answer:

To determine the classification of the second solution, we need to compare the amount of solid dissolved in it to the amount that can be dissolved in water at that temperature.

From the first solution, we know that 36.8 g of the solid can dissolve in 200 mL of water. To convert this to g/mL, we divide 36.8 g by 200 mL to get 0.184 g/mL.

Using this value, we can calculate the maximum amount of solid that can dissolve in 100 mL of water:

0.184 g/mL x 100 mL = 18.4 g

Since the second solution was made by dissolving 19.1 g of the solid in 100 mL of water, it is a supersaturated solution.

Since the process is isentropic, the entropy remains constant. Therefore, we can use the isentropic relation T2 T1   P2 P1   γ 1 γwhere γ is the specific heat ratio, which for methane is approximately 1.3. Since the process is at constant pressure, we can also use the ideal gas law.

P1V1 = P2V2Since the methane is assumed to be incompressible; we can assume that V1 = V2. Combining these equations, we get.T2T1  P1 P2 1.3 1.3   P1 P2 0 154 P1 P2  1, since the volume remains constant. Therefore, we have T2 T1   1This means that the temperature remains constant at 120 K, and the temperature change is 0 K. Therefore, the correct answer is 0 K. Liquid methane is commonly used in various cryogenic applications. The critical temperature of methane is 191 K (or 82 degree C), and thus methane must be maintained below 191 K to keep it in liquid phase. Determine the entropy change of liquid methane as it undergoes a process from 110 K and 1 MPa to 120 K and 5 MPa using tabulated properties and approximating liquid methane as an incompressible substance.

learn more about methane here.

https://brainly.com/question/2127750

#SPJ11

Total, 3 moles of N₂O₅ contain the same number of the nitrogen atoms as 3 mole of NO₂.

Nitrogen is the chemical element with symbol N and 7 its atomic number. It is the nonmetallic element and a member of the group 15 of the periodic table.

Balanced chemical equations for the conversion of the nitrogen dioxide (NO₂) to dinitrogen pentoxide (N₂O₅) will be;

2NO₂(g) + O₂(g) → 2N₂O₅(g)

From the equation, we can see that 2 moles of NO₂ will react to form 2 moles of N₂O₅.

However, the number of moles of N₂O₅ required to contain the same number of nitrogen atoms as 3 moles of NO₂ will be calculated as;

Number of nitrogen atoms in 3 moles of NO₂ = 3 x 2 = 6

Number of moles of N₂O₅ required = 6/2

= 3

To know more about nitrogen atoms here

https://brainly.com/question/30740278

#SPJ4

The nucleophile in the aldol condensation is generated by deprotonation of the alpha-carbon of an aldehyde or ketone by a strong base, forming an enolate ion.

In the aldol condensation reaction, a nucleophile is generated by deprotonation of the alpha-carbon of an aldehyde or ketone by a base, typically a strong base like hydroxide (OH-) or alkoxide (RO-).

This generates an enolate ion, which is a resonance-stabilized anion with a negatively charged oxygen atom and a carbon-carbon double bond adjacent to the carbonyl group.

The general equation for the Aldol condensation reaction is:

RCHO + R'CHO → RCH=CHR' + H2O

The reaction can be catalyzed by a base, such as NaOH, and proceeds via the following mechanism:

Deprotonation: The base (OH-) abstracts a proton from the alpha-carbon of the aldehyde (RCHO) to generate an enolate ion.

RCHO + OH- → RCHO- + H2O

Nucleophilic attack: The enolate ion attacks the carbonyl carbon of a second aldehyde molecule (R'CHO), which is also deprotonated by the base to form its own enolate ion.

RCHO- + R'CHO → RCH=CH-CHO + OH-

Protonation: The resulting beta-hydroxy aldehyde is protonated by water (or acid) to form the aldol product.

RCH=CH-CHO + H2O → RCH(OH)-CH=CHOH

Thus, in the aldol condensation reaction, the enolate ion acts as a nucleophile and attacks the carbonyl carbon of another aldehyde or ketone to form a new carbon-carbon bond and generate a beta-hydroxy aldehyde or beta-hydroxy ketone.

Learn more about the aldol condensation at

https://brainly.com/question/29995098

#SPJ4

Preservation Techniques

Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis.

Pickling, smoking, and drying foods have been used for centuries to preserve foods.

Osmotic pressure is never a sterilization technique.

The preservation techniques and their effects on bacteria can be elaborated as follows:

Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis. This means that the high concentration of solutes outside the bacterial cells causes water to flow out of the cells, leading to cell shrinkage and ultimately inhibiting bacterial growth.

Pickling, smoking, and drying foods have been used for centuries to preserve foods. These methods work by either removing moisture, adding preservatives, or changing the food's environment, all of which help to slow down or prevent the growth of bacteria and spoilage.

Osmotic pressure is never a technique used for food preservation and sterilization; rather, it's a concept related to the movement of water across a semipermeable membrane in response to differences in solute concentrations. However, the principle of osmotic pressure can help us understand how some preservation techniques, such as adding salt or sugar, work by creating a hypertonic environment that leads to plasmolysis in bacteria.

To learn more about Food Preservation visit:

https://brainly.com/question/20397037

#SPJ11

3 step diagram for the preparation of 0.08330233 M CuCl₂ solution is attached below.

A stock solution can best be described as a concentrated solution of known exact concentration that is diluted for future use in the laboratory. You can choose not to prepare a stock solution, but doing so can streamline your operations while saving significant time and resources in the process.

Now, following are the steps for the preparation of CuCl₂ solution:

1. Weigh out 33.6 g of CuCl₂ precisely.

2. Dissolve the weighed out CuCl₂ in some amount of distilled water and transfer it to a volumetric flask.

3. Calculate the volume of solution and add the required amount of water to make up the volume.

Molarity = moles/volume

0.08330233 = 0.249907/Volume

Volume = 0.249907/0.08330233

Volume = 2.99 L

To know more about stock solution, visit:

https://brainly.com/question/29221166

#SPJ1

Failure to wrap the condenser with a wet paper towel during azeotropic distillation can lead to a lower percent yield due to increased temperature, rapid boiling, formation of bubbles, and loss of solvent and product.

If the condenser was not wrapped up with a wet paper towel during azeotropic distillation, the temperature of the system could increase significantly. This increase in temperature can cause the solvent to boil too rapidly, which can lead to the formation of bubbles in the distillation flask.

These bubbles can trap some of the desired product in the flask, reducing the percent yield. Additionally, if the temperature of the system becomes too high, it can cause the solvent to evaporate too quickly, leading to loss of the solvent and product. This can also reduce the yield of the desired product.

For more such questions on condenser, click on:

https://brainly.com/question/29457387

#SPJ11

Answer:

Chemical Reaction

Explanation:

A chemical reaction is a process in which substances undergo a chemical change to form a different substance. In this reaction, the hydrogen peroxide is catalyzed by the yeast to release the oxygen molecules.

Please mark as brainlist.

To determine the number of moles of CF4 in 171 g of CF4, you'll first need to calculate the molar mass of CF4. The molar mass of an element can be found by using the periodic table. There are approximately 1.94 moles of CF4 in 171 g of CF4. The correct answer is B) 1.94 mol.

Carbon (C) has a molar mass of 12.01 g/mol, and Fluorine (F) has a molar mass of 19.00 g/mol. Since there are four Fluorine atoms in CF4, the molar mass of CF4 is:

Molar mass of CF4 = (1 x 12.01 g/mol) + (4 x 19.00 g/mol) = 12.01 + 76.00 = 88.01 g/mol

Now that you have the molar mass of CF4, you can use it to calculate the number of moles in 171 g of CF4:

Number of moles = (mass of CF4) / (molar mass of CF4)
Number of moles = 171 g / 88.01 g/mol = 1.94 mol

to learn more about number of moles

https://brainly.com/question/14485544

#SPJ11

The Montreal Protocol categorizes CFCs and halons in two classes based on their ozone-depletion potential.

The Montreal Protocol categorizes CFCs and halons in two classes based on their ozone-depletion potential. These chemicals are also considered greenhouse gases, which contribute to global warming and climate change. Montreal Protocol is an international treaty designed to protect the ozone layer by phasing out the production and consumption of ozone-depleting substances.
The Ozone Depletion Potential (ODP) of a compound is the relative rate at which it can degrade the ozone layer, and the ODP for trichlorofluoromethane (R-11 or CFC-11) is fixed at 1.0.

ODP can be estimated from the molecular structure of a particular product. The ODP of chlorofluorocarbons is about 1. The brominated types generally have higher ODP in the range of 5-15 because bromine reacts more aggressively with ozone. Most HCFCs have an ODP in the range of 0.005 - 0.2 Due to the presence of hydrogen, they easily react in the troposphere, thus reducing their chances of reaching the stratosphere where the ozone layer is located. Hydrofluorocarbons (HFCs) do not contain chlorine, so their ODP is essentially zero. ODP is often used in conjunction with a compound's Global Warming Potential (GWP) to assess whether a compound is environmentally friendly.

Learn more about ozone depletion:

brainly.com/question/11318086

#SPJ11

The best method to eliminate swimmers itch is to break the life chain of the schistosome. This can be done by controlling the population of the snails that serve as the intermediate host for the parasite. This can be achieved by using molluscicides or other methods to reduce the snail population.

Destroying all aquatic vegetation or raising the pH to destroy snails may also be effective, but these methods can have negative impacts on the ecosystem and are not always practical. Applying antibiotics to the water is not an effective method for eliminating swimmers itch as it is caused by a parasite, not bacteria.

to know more about eliminate swimmers itch click this link-

brainly.com/question/31576464

#SPJ11

.A. Ionization energy is commonly expressed as the energy required to remove an electron from each atom in exactly 1 mole of atoms all the options that correctly describe ionization energy (IE) and/or its role in chemical reactivity

More energy must be released for each additional electron. Because the atom's overall charge changes to positive after the first electron is gone, the negative forces of the remaining electrons will be drawn to the positive charge of the newly created ion.

The amount of energy needed to expel the highest-energy electron from a neutral atom is known as the ionisation energy (IE). Ionisation energy often rises over a time and falls over a group. Effective nuclear charge rises with time while electron shielding stays constant.

learn more about ionisation energy

https://brainly.com/question/20658080

#SPJ1

Blue-green algae, although they are actually cyanobacteria.

A class of photosynthetic microorganisms known as cyanobacteria were crucial in forming the Earth's atmosphere and environment. Around 2.7 billion years ago, when most life forms were toxic to methane, carbon dioxide, and other atmospheric gases, they began to evolve. Cyanobacteria produced oxygen as a byproduct of converting carbon dioxide and water into organic matter using light energy, which resulted in the buildup of oxygen in the atmosphere. The atmosphere of the Earth underwent a transformation known as the Great Oxygenation Event that made it possible for complex living forms to evolve. Because they were probably the parents of the chloroplasts found in modern plant cells, cyanobacteria also contributed to the development of eukaryotic cells.

learn more about cyanobacteria here:

https://brainly.com/question/2516577

#SPJ11

The number of moles of ethanol consumed during the experiment is 1.7 mol.

To calculate the number of moles of ethanol consumed during the experiment, we first need to find the change in the amount of ethanol, which is the initial amount minus the final amount;

Change in amount of ethanol=initial amount - final amount

Change in amount of ethanol = 95 g - 15 g

Change in amount of ethanol = 80 g

Next, we need to convert the change in the amount of ethanol to moles by dividing by the molar mass;

Number of moles of ethanol = (Change in amount of ethanol) / (Molar mass of ethanol)

Number of moles of ethanol = 80 g / 46.07 g/mol

Number of moles of ethanol ≈ 1.7 mol

To know more about moles here

https://brainly.com/question/26416088

#SPJ4

The specific purpose of the ether in an esterification reaction using H2SO4 as the acid catalyst is to act as a solvent.

Ether helps to dissolve the reactants, facilitates the reaction, and prevents the formation of any side products. Additionally, ether is an aprotic solvent, meaning it doesn't participate in the reaction, ensuring that only the desired ester product is formed.

The specific purpose of adding ether to the esterification reaction when using H2SO4 as the acid catalyst is to act as a solvent and facilitate the reaction. Ether helps to dissolve both the reactants and the catalyst, allowing for better mixing and more efficient reaction. Additionally, ether can help to extract the water produced during the reaction, which can further drive the equilibrium towards the formation of the desired ester product.

To know more about esterification click here:

https://brainly.com/question/16010744

#SPJ11

The table has been attached below, describing if the given compounds sublime at STP.

Sublimation is a physical process in which a substance transitions directly from a solid to a gas without passing through the liquid phase. This occurs when the vapor pressure of the solid exceeds the atmospheric pressure. The opposite process, when a gas transitions directly to a solid, is called deposition. Sublimation is important in many areas of science and technology, including the purification of substances, the production of freeze-dried foods, and the creation of computer chips. It is also responsible for some unusual natural phenomena, such as the formation of snowflakes and the slow erosion of ice in cold, dry environments.

To know more about Sublimation, visit:

https://brainly.com/question/29304516

#SPJ1

The given waste treatment methods, namely Venturi scrubbers, spray towels, and packed towers, are examples of absorption methods.

Absorption is a process in which one substance is dissolved or taken up by another substance. In the context of waste treatment, absorption involves the transfer of pollutants from a gas stream into a liquid stream.

Venturi scrubbers use a high-velocity liquid stream to capture and absorb pollutants from the gas stream. The liquid droplets produced by the scrubber collide with the pollutants, causing them to dissolve and become trapped in the liquid. Spray towers work in a similar way, but use a fine mist of liquid droplets to capture pollutants. Packed towers, on the other hand, contain a packing material that provides a large surface area for the liquid to contact the gas stream, promoting absorption.

In contrast, adsorption involves the attachment of pollutants to a surface, while dialysis involves the separation of substances using a semipermeable membrane, and filtration involves the physical separation of solids from liquids or gases. The given waste treatment methods are examples of absorption methods, specifically using liquids to absorb pollutants from gas streams.

Learn more about pollutants here:

https://brainly.com/question/29594757

#SPJ4