A contractor excavates 10,000 m3 soil at moist unit weight of 17.5 kN/m3 and moisture content of 10% from a borrow pit and transports it to a project site. The project has an area of 20,000 m2 to be filled with this compacted soil. If the required dry unit weight and moisture content of the compacted soil are 18.3 kN/m3 and 12.5% (assume there is no soil loss during transportation and compaction), what is the thickness of the compacted soil and how much water needs to be added?

Answer:

Part A

The thickness of the compacted soil is approximately 4.3467 × 10⁻¹ m

Part B

The weight of water to be added is approximately 19886.[tex]\overline{36}[/tex] kN, the volume of the water added is approximately 2,027.77 m³

Explanation:

The parameters of the soil are;

The volume of sol the excavator excavates, [tex]V_T[/tex] = 10,000 m³

The moist unit weight, W = 17.5 kN/m³

The moisture content = 10%

The area of the project, A = 20,000 m²

The required dry unit weight = 18.3 kN/m³

The required moisture content = 12.5%

Part A

Therefore, we have;

The moist unit weight = Unit weight = ([tex]W_s[/tex] + [tex]W_w[/tex])/[tex]V_T[/tex]

The moisture content, MC = 10% = ([tex]W_w[/tex]/[tex]W_s[/tex]) × 100

∴ [tex]W_w[/tex] = 0.1·[tex]W_s[/tex]

∴ The moist unit weight = 17.5 kN/m³ = ([tex]W_s[/tex] + 0.1·[tex]W_s[/tex])/(10,000 m³)

1.1·[tex]W_s[/tex] = 10,000 m³ × 17.5 kN/m³ = 175,000 kN

[tex]W_s[/tex] = 175,000 kN/1.1 = 159,090.[tex]\overline{09}[/tex] kN

For the required soil, we have;

The required dry unit weight = 18.3 kN/m³ = [tex]W_s[/tex]/[tex]V_T[/tex] = 159,090.[tex]\overline{09}[/tex] kN/[tex]V_T[/tex]

[tex]V_T[/tex] = 159,090.[tex]\overline{09}[/tex] kN/(18.3 kN/m³) ≈ 8,693.4923 m³

The total volume of the required soil ≈ 8,693.4923 m³

Volume [tex]V_T[/tex] = Area, A × Thickness, d

∴ d =  [tex]V_T[/tex]/A

d = 8,693.4923 m³/(20,000 m²) ≈ 4.3467 × 10⁻¹ m

The thickness of the compacted soil ≈ 4.3467 × 10⁻¹ m

Part A

The moisture content, MC = 12.5% = ([tex]W_w[/tex]/[tex]W_s[/tex]) × 100

[tex]W_w[/tex] = [tex]W_s[/tex] × MC/100 = 159,090.[tex]\overline{09}[/tex] kN × 12.5/100 = 19886.[tex]\overline{36}[/tex] kN

The weight of water to be added, [tex]W_w[/tex] = 19886.[tex]\overline{36}[/tex] kN

Where the density of water, ρ = 9.807 kN/m³

Therefore, we have;

The volume of water, V = [tex]W_w[/tex]/ρ

∴ V = 19886.[tex]\overline{36}[/tex] kN/(9.807 kN/m³) ≈ 2027.77 m³

The volume of water, V ≈ 2027.77 m³

Calculate the resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V.

Build a 32-bit accumulator circuit. The circuit features a control signal inc and enable input en. If en is 1 and inc is 1, the circuit increments the stored value by an amount specified by an input A[31:0] on the next clock cycle. If en is 1 and inc is 0 the circuit decrements the stored value by the amount specified in the input A on the next clock cycle. If en is 0, the circuit simply stores its current value without modification. The circuit has the following interface:______.
Input clock governs the state transitions in the circuit upon each rising edge.
Input clear is used as a synchronous reset for the stored value.
Input inc controls whether the value stored is to be incremented or decremented.
Input en is a control signal that activates the values increment/decrement
Input A determines how much to increment or decrement by
Output value is a 32-bit signal that can be used to read the stored value at any time.
* Note: Use any combination of combinational or sequential logic. It may be helpful to look into D Flip Flops and Registers.

pls help me it’s due today

A runner ran a 600 m race in 2 min 17 seconds. Calculate his average speed in m/sec.

The alternator must be operated with the battery disconnected or with the terminals at the back of the alternator
disconnected.
True or false

The steam requirements of a manufacturing facility are being met by a boiler whose rated heat input is 5.5 x 3^106 Btu/h. The combustion efficiency of the boiler is measured to be 0.7 by a hand-held flue gas analyzer. After tuning up the boiler, the combustion efficiency rises to 0.8. The boiler operates 4200 hours a year intermittently. Taking the unit cost of energy to be $4.35/10^6 Btu, determine the annual energy and cost savings as a result of tuning up the boiler.

You have available three blocks of different material, at various temperatures. They are, respectively, a 2 kg block of iron at 600 K, a 3 kg block of copper at 800 K and a 10 kg block of granite at 300 K. The heat capacities for the three materials are 0.460 (iron), 0.385 (copper), and 0.790 (granite), in kj/(kg*K), all independent of temperature. For solids, the heat capacities at constant pressure and constant volume can be assumed to be equal, Cp=Cv. what is the minimum temperature that could be obtained in any one of the block? what is the maximum temperature that could be obtained? no heat or work interactions with the enviroment are allowed.

An interior beam supports the floor of a classroom in a school building. The beam spans 26 ft. and the tributary width is 16 ft. Dead load is 20 psf. Find:

a. Basic floor live load Lo in psf
b. Reduced floor live load L in psf
c. Uniformly distributed total load to the beam in lb/ft.
d. Compare the loading in part c with the alternate concentrated load requried by the Code. Which loading is more critical for bending, shear, and deflection.?

Another name for a load-center distribution system is a A. primary radial system. B. complex radial system. C. split-radial system. D. dual-radial system.

You have been hired to design a control system for a nuclear reactor. The system monitors the temperature of the reactor using sensors at two points, A & C. If the temperature at either of these points rises past a certain level the sensor will toggle high. A sudden blackout would be disruptive so an override lever, B, is installed to keep the plant running when one of the sensors are tripped until a maintenance team can come in. If both sensors trip, the plant will shut down regardless of the override lever. Assume that the output - a plant shutdown - is represented as a logic
Assume that it takes only one sensor to toggle high for the plant shutdown if the override lever is not activated. Assume B=1 indicates the override lever has been activated.
Construct the truth table for the control system.

A frequenter of a pub had observed that the new barman poured in average 0.47 liters of beer into the glass with a standard deviation equal to 0.09 liters instead of a half a liter with the same standard deviation. The frequenter had used a random sample of 47 glasses of beer in his experiment. Consider the one-sided hypothesis test for volume of beer in a glass: H0: u=0.5 against H1: u<0.5. Determine the P-value of this test.
Round your answer to four decimal places (e.g. 98.7654).

I just need help on problem B

QUESTION 4:
4.1
Name FOUR principles of kinetic friction ​