A correct valuation is available-for-sale securities at amortized cost. trading securities at amortized cost. held-to-maturity securities at amortized cost. none of these answer choices are correct.

The analytical technique you are referring to is known as management by exception.

This technique involves identifying the areas where performance is deviating significantly from the standard and focusing management's attention on those areas to take corrective actions. By doing so, management can save time and resources by not scrutinizing areas where performance is close to the standard.

Management by exception allows managers to prioritize their efforts and resources on areas that require the most attention, helping them to make better decisions and improve overall organizational performance. This technique is commonly used in financial management, budgeting, and operations management to monitor and control performance effectively.

More on analytical technique: https://brainly.com/question/28498361

#SPJ11

Answer:

The number of moles (n) can be calculated using the formula:

n = mass (in grams) / molar mass (in grams per mole)

Plugging in the values:

n = 3.2 grams / 12.01 grams per mole

n ≈ 0.266 moles

Therefore, there are approximately 0.266 moles of carbon in a diamond with a mass of 3.2 gram

Analyzing a company's "acid test" ratio is one way in which an investor can tell if the company can pay off its short-term debts if there is a drop in sales revenue.

The acid test ratio, also known as the quick ratio, measures a company's ability to meet its immediate financial obligations without relying on the sale of inventory. It is calculated by dividing the sum of a company's cash, cash equivalents, and accounts receivable by its current liabilities. A higher acid test ratio indicates a greater ability to cover short-term debts, which is particularly important during times of reduced sales revenue.

learn more about:- acid test here

https://brainly.com/question/30764975

#SPJ11

Answer and Explanation:

Charlotte is most likely looking for Trichinella larvae under the microscope. Trichinellosis is a disease caused by eating raw or undercooked meat, particularly pork, that contains the larvae of the Trichinella worm. The larvae can be found in the muscle tissue of infected animals. In severe cases, trichinellosis can be fatal. To prevent the spread of trichinellosis, all pork must be cooked to an internal temperature of 145°F (63°C).

An ownership interest of 30% of the common stock of another corporation should generally be accounted for using the equity method.

The equity method is used when an investor has significant influence over another corporation but does not have control over it. In this case, the ownership interest of 30% indicates significant influence but not control. Under the equity method, the investor initially records the investment at cost and subsequently adjusts it based on its share of the investee's net income or loss. The investor also recognizes its share of the investee's dividends.

learn more about :- ownership interest here

https://brainly.com/question/31817275

#SPJ11

The guanine nucleotide exchange factor assists in the exchange of GDP with GTP in G proteins, enabling their activation and subsequent signaling events., the correct option is A.

Guanine nucleotide exchange factors play a crucial role in the activation of G proteins upon hormone receptor binding. G proteins are molecular switches that regulate various cellular processes in response to extracellular signals.

When a hormone binds to its specific receptor, it triggers a conformational change in the receptor, leading to the activation of a G protein associated with it. GTP binding causes the G protein to become activated and dissociate from the receptor, allowing it to interact with downstream effector molecules and initiate signaling cascades, the correct option is A.

To learn more about guanine follow the link:

https://brainly.com/question/13254063

#SPJ4

The calculated turnover rate for an LDH tetramer is **16.34 min⁻¹**. This value is obtained from the Vmax of the Lineweaver-Burke plot and the enzyme concentration.

To find the turnover rate (kcat) for an LDH tetramer, we need to calculate the enzyme concentration first. The enzyme concentration can be calculated using the given initial concentration, volume, and molecular weight of an LDH monomer. First, find the molecular weight of an LDH monomer: 331 amino acids * 110 Daltons/amino acid = 36410 Daltons. Convert the initial concentration from ug/ml to moles/liter: (250 ug/ml) * (1 g/1000000 ug) * (1 mole/36410 g) = 6.86 x 10⁻⁹ M. Next, find the enzyme concentration in the reaction: (25 ul) * (6.86 x 10⁻⁹ M) / (1000 ul) = 1.72 x 10⁻¹¹ M. Finally, calculate the turnover rate (kcat): Vmax / enzyme concentration = (76.34 nmol/min) / (1.72 x 10⁻¹¹ M) = 16.34 min⁻¹.

Know more about Lineweaver-Burke plot here:

https://brainly.com/question/30459981

#SPJ11

Bronsted Lowry Acid is acid that readily donate a proton and use single reaction arrow to indicate that the ionisation is complete.

Option D is correct.

A Bronsted-Lowry corrosive is any species that can give a proton (H+) to another particle. Any species capable of accepting a proton from another molecule is a Bronsted-Lowry base. To put it succinctly, a base Bronsted-Lowry is a proton acceptor (PA) and an acid Bronsted-Lowry is a proton donor (PD).

A corrosive base response, as indicated by the Brønsted-Lowry definition, is an exchange of a proton starting with one particle or particle then onto the next. A pair of substances that are connected by the loss or gain of a single hydrogen ion is known as a conjugate acid-base pair. When a base accepts a proton, a particle known as a conjugate acid is produced.

Incomplete question:

fill in the blank. ____ Acids that readily donate a proton and use single reaction arrow to indicate that the ionisation is complete.

A. Hydrochloric acid (HCl)

B. Sulfuric acid (H₂SO₄)

C.  Nitric acid (HNO₃)

D. Bronsted Lowry Acid

Learn more about Bronsted Lowry acid ;

brainly.com/question/29317749

#SPJ4

The unrealized gains and losses on available-for-sale securities are: The correct answer is: reported on the portfolio of investments.

Unrealized gains and losses on available-for-sale securities are reported on the portfolio of investments. Available-for-sale securities are financial instruments that are not classified as trading securities or held-to-maturity securities. These securities are typically held by companies as investments for an extended period. When it comes to available-for-sale securities, their fair values fluctuate over time. These fluctuations lead to unrealized gains or losses. However, unlike trading securities, which are actively bought and sold for short-term gains, available-for-sale securities are intended for longer-term investment purposes.

Accounting standards require that the unrealized gains and losses on available-for-sale securities be reported as a separate component of comprehensive income. This means that these gains and losses are not recognized in the income statement but are reported as part of the comprehensive income statement or in the equity section of the balance sheet. Therefore, the most accurate statement is that the unrealized gains and losses on available-for-sale securities are reported on the portfolio of investments, reflecting the overall performance of the investment portfolio rather than on individual securities.

Learn more about trading securities here:

https://brainly.com/question/31859925

#SPJ11

The recommended thermostat setting in the summer is around 78 degrees Fahrenheit (25.5 degrees Celsius) for optimal energy efficiency and comfort.

Setting your thermostat at around 78 degrees Fahrenheit (25.5 degrees Celsius) during the summer provides a balance between energy savings and maintaining a comfortable indoor environment. Here are some factors to consider:

a) Energy Efficiency: Setting the thermostat at a slightly higher temperature helps reduce energy consumption and lowers your cooling costs. Each degree you raise your thermostat can result in energy savings of around 3-5%. By keeping the temperature at a moderate level, you can prevent excessive cooling and save on your utility bills.

b) Comfort: While energy efficiency is important, it's also essential to maintain a comfortable indoor environment. Many people find that a temperature around 78 degrees Fahrenheit (25.5 degrees Celsius) is still comfortable during the summer months. However, personal preferences can vary, and you can adjust the temperature slightly higher or lower to suit your comfort needs.

c) Considerations: It's worth noting that factors such as humidity levels, insulation, and the presence of direct sunlight can influence your comfort level. If your home is well-insulated and protected from heat gain, you may be able to set your thermostat a bit higher. Additionally, using ceiling fans or portable fans can enhance air circulation and help you feel cooler even at slightly higher temperatures.

Overall, setting your thermostat around 78 degrees Fahrenheit (25.5 degrees Celsius) in the summer provides a good balance between energy efficiency and comfort. However, it's important to find the temperature that works best for you and make adjustments based on your personal preferences and the specific conditions of your home.

To know more about thermostat, refer here :

https://brainly.com/question/32266604#

#SPJ11

The correct answer is d. presbyopia.

Presbyopia is a common age-related condition that affects the ability to focus on near objects. It occurs due to the gradual loss of elasticity in the lens of the eye, as well as the weakening of the muscles that control the shape of the lens. As people enter their fifties, the lens becomes less flexible and the muscles around the eyes become weaker, making it difficult to focus on close-up objects.

Unlike gingivitis (a gum disease), sarcopenia (age-related muscle loss), and gout (a form of arthritis), which affect different parts of the body, presbyopia specifically pertains to changes in the eyes. It is a natural part of the aging process and affects nearly everyone to some extent.

To correct presbyopia, individuals often require reading glasses or multifocal lenses that provide different zones for near and distance vision. Contact lenses and surgical options like monovision or multifocal lens implants can also be considered. option(d)

For such more questions on presbyopia

https://brainly.com/question/17003271

#SPJ8

The original concentration of the gold chloride solution was 0.52 M.

To determine the original concentration of the gold chloride solution, we can use the concept of dilution. When two solutions of different concentrations are mixed together, the resulting concentration can be calculated using the formula:

C1V1 = C2V2

where C1 and V1 represent the initial concentration and volume, and C2 and V2 represent the final concentration and volume.

Given that the final volume is 1 liter and the final concentration is 0.26 M, and the volumes of the original and added solutions are both 0.5 liters, we can substitute these values into the formula:

C1 * 0.5 L = 0.26 M * 1 L

Simplifying the equation:

C1 = (0.26 M * 1 L) / 0.5 L

C1 = 0.52 M

The calculation is based on the assumption that the dilution process is an ideal dilution, where there is no change in the total amount of gold chloride present in the solution during the mixing process. Additionally, it assumes that there are no chemical reactions or interactions between the two solutions.

for more such questions on concentration

https://brainly.com/question/32360427

#SPJ8

After 60 hours, only 0.1953 grams of technetium-99 remains out of the original 200 grams.

Technetium-99, an unstable radioactive isotope, undergoes radioactive decay with a half-life of 6 hours. This means that after 6 hours, half of the original amount will decay, leaving only half remaining. After another 6 hours (12 hours total), half of that remaining amount will decay again, leaving only one-quarter of the original amount remaining. This process continues every 6 hours until there is no more technetium-99 left.

Starting with 200 grams of technetium-99, we can use the half-life to calculate how much remains after 60 hours. Since 60 hours is equal to 10 half-lives (60 ÷ 6 = 10), we can use the following equation:

Amount remaining = original amount × (1/2)^number of half-lives

Plugging in the numbers, we get:

Amount remaining = 200 × (1/2)^10
Amount remaining = 0.1953 grams

Therefore, after 60 hours, only 0.1953 grams of technetium-99 remains out of the original 200 grams. The rest has decayed and transformed into other elements.

Learn more about half-life at: https://brainly.com/question/1160651

#SPJ11

The calculated [H⁺] concentration value is  1.25 x 10⁻¹³ M , this solution is highly acidic.

To calculate the [H⁺] (hydrogen ion concentration) given the [OH⁻] (hydroxide ion concentration), you can use the formula for the ion product of water, which states that the product of [H⁺] and [OH⁻] is always equal to 1.0 x 10⁻¹⁴ at 25°C.

Using this formula, you can rearrange it to solve for [H⁺]. In this case, [OH⁻] is given as 8.01 x 10⁻² M:

[H⁺] = (1.0 x 10⁻¹⁴) / [OH⁻]

[H⁺] = (1.0 x 10⁻¹⁴) / (8.01 x 10⁻²)

[H⁺] ≈ 1.25 x 10⁻¹³ M

The concentration of [H⁺] is approximately 1.25 x 10⁻¹³M.

Based on the calculated [H⁺] concentration, this solution is highly acidic. In an aqueous solution, the concentration of [H⁺] exceeding [OH⁻] indicates an excess of hydrogen ions, resulting in an acidic pH. The lower the pH, the more acidic the solution.

To know more about acid,

https://brainly.com/question/29796621

First-order reality - Janice's boss walked into the conference room without greeting anyone.  

Janice observed that her boss entered the conference room without acknowledging anyone present. This behavior can be interpreted as a demonstration of second-order reality. In second-order reality, individuals perceive and interpret the actions and behaviors of others based on their own subjective experiences, biases, and expectations. In this situation, Janice's boss's lack of greeting could be interpreted as a sign of disrespect, indifference, or simply being preoccupied with other matters. However, it is important to consider that there might be various reasons behind the boss's behavior that Janice may not be aware of, such as time constraints, urgent matters, or personal circumstances. Without further information or clarification, it is challenging to determine the exact motives or intentions behind the boss's actions. Therefore, Janice's interpretation of the event falls within the realm of second-order reality.

Learn more about time constraints here

brainly.com/question/31035359

#SPJ11

The calculated mass οf O₂ prοduced by the plant during phοtοsynthesis is apprοximately 3.86 grams.

Tο calculate the mass οf O₂ prοduced, we need tο determine the mοles οf CO₂ frοm the given vοlume and then assume an equal number οf mοles οf O₂ are prοduced.

Given:

Vοlume οf CO₂ = 3 L

Temperature = 25 degrees Celsius = 298.15 K

Pressure = 1 atm

Using the ideal gas law:

PV = nRT

Plugging in the values:

(1 atm) * (3 L) = n * (0.0821 L·atm/mοl·K) * (298.15 K)

Sοlving fοr n (mοles οf CO₂):

n = (1 atm * 3 L) / (0.0821 L·atm/mοl·K * 298.15 K)

n ≈ 0.1207 mοl

Since the stοichiοmetry οf the reactiοn tells us that fοr every 6 mοles οf CO₂ cοnsumed, 6 mοles οf O₂ are prοduced, we can assume that the mοles οf O₂ prοduced are alsο apprοximately 0.1207 mοl.

Finally, tο calculate the mass οf O₂, we multiply the mοles by the mοlar mass οf O₂ (32 g/mοl):

Mass οf O₂ = 0.1207 mοl * 32 g/mοl

Mass οf O₂ ≈ 3.86 g

Therefοre, the calculated mass οf O₂ prοduced by the plant during phοtοsynthesis is apprοximately 3.86 grams.

To learn more about ideal gas from the given link

https://brainly.com/question/30236490

#SPJ4

The bond angle of carbon-carbon in triple bond geometry is 180°.

Triple-bonded carbons are sp-hybridized and have linear shapes, with the bonded atoms at angles of 180° to each other. Because of this linear shape, geometric isomerism does not occur in alkynes. Alkynes are nonpolar since they contain nothing but carbon and hydrogen and so like the alkynes and alkenes, they are not soluble in water and are generally less dense than water.

Alkynes are hydrocarbons that contain carbon-carbon triple bonds. Their general formula is CₙH₂ₙ₋₂ for molecules with one triple bond and no rings. Alkynes undergo many of the same reactions as alkenes but can react twice because of the presence of the two p-bonds in the triple bond.

To learn more about bond geometry

https://brainly.com/question/29282058

There are approximately 3.12 x 10^24 water molecules in 5.2 moles of water.

To calculate the number of water molecules in a given amount of moles, we need to use Avogadro's number. Avogadro's number, denoted as N_A, is approximately 6.022 x 10^23 molecules per mole. This value represents the number of particles (atoms, molecules, or ions) in one mole of a substance.

To find the number of water molecules in 5.2 moles of water, we can multiply the number of moles by Avogadro's number:

Number of water molecules = 5.2 moles * (6.022 x 10^23 molecules per mole)

Calculating the result gives us:

Number of water molecules = 5.2 * (6.022 x 10^23)

Number of water molecules ≈ 3.12 x 10^24

Therefore, there are approximately 3.12 x 10^24 water molecules in 5.2 moles of water.

To know more about moles , refer here :

https://brainly.com/question/30885025#

#SPJ11

The correct nuclear symbols, including superscript and subscript, for each type of radiation are as follows:

Alpha particle: α (superscript: 4, subscript: 2)

Beta particle: β- (superscript: 0, subscript: -1)

Gamma ray: γ (no superscript or subscript)

Alpha particles (α):

Alpha particles are a type of ionizing radiation consisting of two protons and two neutrons, which is equivalent to the nucleus of a helium-4 atom.

They have a positive charge of +2 (2+), making them highly ionizing.

Alpha particles have relatively low penetration power and can be stopped by a sheet of paper or a few centimeters of air.

They can cause significant damage to living tissues if they are emitted internally or enter the body.

Gamma rays (γ):

Gamma rays are a form of electromagnetic radiation, similar to X-rays and visible light.

They are highly energetic and have no charge or mass.

Gamma rays are emitted from the nucleus of an atom during nuclear reactions or radioactive decay processes.

They have high penetration power and can travel long distances through air and other materials.

Gamma rays are the most ionizing type of radiation and can cause damage to cells and DNA.

Beta particles (β):

Beta particles are high-energy electrons (β-) or positrons (β+), emitted from the nucleus during certain types of radioactive decay.

Beta-minus (β-) particles are electrons with a negative charge, while beta-plus (β+) particles are positrons with a positive charge.

Beta particles have higher penetration power than alpha particles but lower penetration power than gamma rays.

They can cause ionization and damage living tissues but to a lesser extent than alpha particles.

These three types of radiation play significant roles in nuclear processes, radiation therapy, and radiation detection. It is important to handle and shield against them appropriately to minimize potential risks.

Learn more about nuclear symbols from the link given below.

https://brainly.com/question/1398857

#SPJ4

The equilibrium constant expression for the given reaction, Fe(s) + 5 CO(g) ⇌ Fe(CO)_5(g), is K_c = [Fe(CO)_5(g)] / [CO(g)]^5.

In this reaction, solid iron (Fe) reacts with carbon monoxide gas (CO) to form iron pentacarbonyl gas (Fe(CO)_5). To build the equilibrium constant expression, we follow the form "products over reactants," where each species is raised to the power of its stoichiometric coefficient.

However, solids and pure liquids are not included in the equilibrium expression. In this case, the product is Fe(CO)_5(g) and the reactant is CO(g). The stoichiometric coefficient for CO(g) is 5, so the equilibrium constant expression becomes K_c = [Fe(CO)_5(g)] / [CO(g)]^5.

The value of a chemical reaction's reaction quotient at chemical equilibrium, where a dynamic chemical system reaches a state where its composition has no measurable tendency to change further, is the equilibrium constant.

Know more about equilibrium constant here:

https://brainly.com/question/29809185

#SPJ11

Answer:

The main difference between ferrous sulfate and ferrous gluconate—the two forms of ionic compound present in iron supplements—is in the percentage of elemental iron they contain. Ferrous sulfate contains 20% elemental iron by weight. Ferrous gluconate contains 12% elemental iron by weight.

The author likely describes the research of Cyrus Thomas because it discredits the hypothesis that mounds were built by a vanished culture.

Thomas, an archaeologist, conducted extensive surveys and excavations of mound sites throughout the Southeastern United States in the late 1800s. He found evidence that the mounds were actually built by Native American tribes who were still present in the area, rather than a lost civilization.

His findings challenged the prevailing belief at the time that the mounds were constructed by a mysterious, advanced society that had vanished without a trace. By highlighting Thomas' research, the author is likely attempting to dispel the notion of a vanished culture and provide more accurate information about the history of the region.

More on research of Cyrus Thomas: https://brainly.com/question/24299773

#SPJ11

Toll-like receptors differ from scavenger receptors in that they mediate signal transduction pathways, causing cytokine production (option d).

Toll-like receptors (TLRs) and scavenger receptors (SRs) are two different types of receptors involved in the recognition of microbial pathogens by the immune system. TLRs are membrane-bound receptors that recognize specific pathogen-associated molecular patterns (PAMPs) on the surface of microorganisms, such as bacteria and viruses. In contrast, SRs are primarily involved in the uptake and clearance of apoptotic cells, oxidized lipids, and other cellular debris.

One key difference between TLRs and SRs is that TLRs bind to common repetitive arrays on microbial surfaces, whereas SRs recognize a wide variety of ligands. Additionally, TLRs stimulate a signal transduction pathway that leads to the production of cytokines, while SRs typically do not. Answer option d.

More on receptors: https://brainly.com/question/32097485

#SPJ11

Based on the given heating curve, the boiling point of the substance is 75°C. Thus, the correct option is D.

A heating curve depicts the changes that occur in the physical state of matter with temperature as a result of absorbing the increasing amount of heat. The plateaus in the curve indicate phase transitions of the substance.  

A heating curve depicting such phase transitions is shown in the image attached below.

In this case, the heating curve of the substance depicts the following:

A - solid phase

B - melting transition of solid into liquid

C- liquid phase

D- boiling transition of liquid into gas

E- gas phase

The transitional phases are depicted by the two plateau regions B and D. B depicts the melting point and D depicts the boiling point.

Thus, the correct answer is 75°C that is option D.

Learn more about heating curve in:

https://brainly.com/question/28978181

#SPJ1

The new temperature is approximately 443.539 Kelvin.

Determine the new temperature?

To determine the new temperature in Kelvin, we can use the combined gas law, which states:

(P₁ * V₁) / T₁ = (P₂ * V₂) / T₂

Where:

P₁ and P₂ are the initial and final pressures (assumed to be constant in this case),

V₁ and V₂ are the initial and final volumes,

T₁ is the initial temperature, and

T₂ is the final temperature.

In this case, we have the initial volume V₁ as 1.78 dm³, the final volume V₂ as 2.55 dm³, and the initial temperature T₁ as 310.5 K. We want to solve for T₂.

Let's assume that the pressure remains constant, so P₁ = P₂. We can rewrite the equation as:

(V₁ / T₁) = (V₂ / T₂)

Now, we can rearrange the equation to solve for T₂:

T₂ = (V₂ * T₁) / V₁

Plugging in the given values:

T₂ = (2.55 dm³ * 310.5 K) / 1.78 dm³

Calculating:

T₂ = 443.539 K

Therefore, the new temperature is approximately 443.539 Kelvin.

To know more about temperature, refer here:

https://brainly.com/question/7510619

#SPJ4    

The relationship between the parent nuclide, hassium, and time can be described as an indirect relationship.

As time progresses, the amount of the parent nuclide hassium decreases due to its radioactive decay. The decay of a radioactive nuclide is an exponential process, and its rate is governed by the nuclide's half-life. With each passing half-life, the amount of hassium is halved. In radioactive decay, the parent nuclide undergoes spontaneous decay and transforms into a different nuclide, known as the daughter nuclide. This decay process occurs at a constant rate, determined by the half-life of the parent nuclide. As time passes, the number of remaining parent nuclides decreases, while the number of daughter nuclides increases. This means that the relationship between hassium and time is indirect: as time increases, the amount of hassium decreases.

Learn more about "radioactive decay" here:

brainly.com/question/1770619

#SPJ11

The polarized C=O bond results in a carbon that is δ⁺ and therefore susceptible to attack by nucleophiles.

In a carbοnyl cοmpοund, such as an aldehyde οr ketοne, the carbοn atοm οf the carbοnyl grοup (C=O) is partially pοsitive (δ⁺) due tο the electrοnegativity difference between carbοn and οxygen. The οxygen atοm, being mοre electrοnegative, pulls electrοn density tοwards itself, creating a partial pοsitive charge οn the carbοn atοm.

This pοlarizatiοn makes the carbοn atοm electrοn-deficient and highly susceptible tο attack by nucleοphiles.

Nucleοphiles are species that cοntain lοne pairs οf electrοns and are attracted tο electrοn-deficient centers. When a nucleοphile apprοaches the carbοn atοm οf a pοlarized C=O bοnd, it can dοnate a pair οf electrοns tο fοrm a new bοnd with the carbοn, leading tο the fοrmatiοn οf a new cοmpοund.

This nucleοphilic attack is an impοrtant step in variοus chemical reactiοns, such as nucleοphilic additiοn reactiοns and nucleοphilic substitutiοn reactiοns, which are cοmmοnly οbserved in οrganic chemistry.

Therefοre, the pοlarizatiοn οf the C=O bοnd creates a pοsitively charged carbοn, making it vulnerable tο nucleοphilic attack.

To know more about carbonyl compound, refer here:

https://brainly.com/question/17422534#

#SPJ4

The decision was to accept the null hypothesis, as the frequencies observed in the chi-square goodness-of-fit test fit well with the expected frequencies.

The chi-square goodness-of-fit test is used to determine whether the observed frequencies in a sample differ significantly from the expected frequencies. In this case, the test showed that there was no significant difference between the observed and expected frequencies, indicating that the data fits well with the expected distribution. Consequently, the decision is to accept the null hypothesis, which states that there is no significant difference between the observed and expected frequencies. This means that the data provides support for the assumption that the observed frequencies are consistent with the expected frequencies.

Learn more about chi-square  here

brainly.com/question/30054864

#SPJ11

The firm should order 65 units this week to meet the order-up-to level of 80 units and cover the backordered units.

To determine how many units a firm should order this week given an order-up-to level of 80 units, no on-hand units, 20 on-order units, and 5 backordered units, follow these steps:

1. Calculate the total units needed: Order-up-to level (80) minus on-hand units (0) equals 80 units needed.
2. Subtract the on-order units from the total units needed: 80 units needed minus 20 on-order units equals 60 units still required.
3. Account for the backordered units: 60 units still required plus 5 backordered units equals 65 units.

So, the firm should order 65 units this week to meet the order-up-to level of 80 units and cover the backordered units.

Learn more about backordered units. at https://brainly.com/question/29869731

#SPJ11

The Cash on Cash return after year 1, assuming no revenue/expense growth, is 3.25%. no revenue/expense growth, the Cash on Cash return after year 1 is 3.25%, which means that for every dollar invested in cash, the return is 3.25 cents after one year.

To calculate the Cash on Cash return, we need to determine the net operating income (NOI) and the initial cash investment. The NOI is calculated by multiplying the purchase price of the building by the cap rate. In this case, the cap rate is 6.5%, so the NOI is 6.5% of the purchase price.

The initial cash investment is determined by taking the loan-to-value (LTV) ratio into account. Since the LTV is 50%, it means that half of the purchase price is financed by a loan, while the remaining half is paid in cash. The cash investment is then multiplied by the interest rate to calculate the annual interest expense. In this scenario, it is an interest-only loan with a 5% interest rate.

Finally, the Cash on Cash return is obtained by dividing the NOI by the initial cash investment, expressed as a percentage.

Learn more about net operating income here

brainly.com/question/30526063

#SPJ11