Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 148.5J is the amount of heat that was required to heat the water.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances. Internal energy is the sum of all kinds of energy that the particles of a matter can possess, for example translational energy. Rotational energy.
Mathematically,
Enthalpy=mass of unknown water× specific heat capacity of water× Change in temperature
mass of water= 0.5 kg
specific heat capacity of water=4.184J/Kg°C
Change in temperature=final temperature - initial temperature
=75°C -4°C
= 71°C
enthalpy=?
Substituting all the given values in the above equation, we get
enthalpy= 0.5× 4.184× 71
=148.5J
Therefore, 148.5J is the amount of heat that was required to heat the water.
To know more about enthalpy, here:
https://brainly.com/question/24170335
#SPJ1
What is the hydronium ion concentration of an acid rain sample that has a pH of 3.45?
A) 2.82 × 10-11 M
B) 3.55 × 10-4 M
C) 3.45 M
D) 10.55 M
The hydronium ion concentration of an acid rain sample that has a pH of 3.45 is 3.55 × 10-4 M.
Given the pH of hydronium ion = 3.45
The hydronium ion concentration can be calculated from the pH using the exact opposite mathematical procedure. The conjugate acid of H2O is H3O+. In aqueous solutions, a proton is denoted by the symbol H3O+. The proton would create a different structure in a non-aqueous solution. H2O(l) → H+(aq) + OH-(aq).
Because hydrogen ions bond to water molecules to generate hydronium ions, the equations pH = -log[H3O+] and pH = p[H3O+] can be used to compute a solution's pH.
pH + pOH = 14 then [H+] = 10^-pH
So the concentration of hydronium ion = 10^-3.45 = 3.55 × 10-4 M
To learn more about hydronium ion click here https://brainly.com/question/14619642
#SPJ4
For each pair of reactants below select the one that is more nucleophilic.
(1) (a) H2O or (b) CH3CO2-.
(2) (a) -NH2 or (b) NH3.
Draw the structure of the compound you would expect from E2 reaction of the molecule below with NaOH. In cases where there is a choice, draw the most substituted alkene product. Show the expected Z or E stereochemistry
(Light green = Cl, red-brown = Br)
The given compound undergoes an E2 elimination reaction to give an alkene.
Elimination by the E2 mechanism
We observed the following reaction between tert-butyl bromide and cyanide at the beginning of this lesson. This is definitely not a substitution reaction.
(CH3)3C-Br + CN(–) ——> (CH3)2C=CH2 + Br(–) + HCN
We are aware that an SN2 reaction for t-butyl bromide is not anticipated. The ethanol solvent is also insufficiently polar to support an SN1 reaction. Since it is around 10 times weaker than bicarbonate, the other reactant, cyanide anion, is both an excellent nucleophile and a respectable base. The only feasible reaction for this set of reactants, then, appears to be a base-induced elimination.
Methanethiolate is 100 times more nucleophilic than methoxide in the methanol solvent employed here. While methanethiolate is around 106 times more basic than methoxide. As a result, the reaction products exhibit a distinct difference that represents nucleophilicity (bonding to an electrophilic carbon) vs basicity (bonding to a proton).n).
To learn more about E2 mechanism refer to:
brainly.com/question/30215559
#SPJ4
By what factor is the rate of a reaction changed if an enzyme lowers the Ea by 9.0 kJ/mol at 37°C? O 2.2 times O 10.2 times
O 7.0 times
O 15.1 times
O 32.9 times
If an enzyme reduces the Ea, the given statement states that the reaction rate will alter seven times.
What does the term "reaction" in chemistry mean?In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional compounds are known as products. Chemical elements or chemical compounds make up substances.
K1 and K2 are the initial and end rate constants.
Given,
Ea1 - Ea2 = 5 KJ/mol
= 5000J/mol
T = 37 oC
= 310 k
Use,
ln(k2/k1) = (Ea1 - Ea2)/(R*T)
ln(k2/k1) = 5000/(8.314*310)
ln(k2/k1) = 1.94
k2/k1 = 6.96
= 7
Since the rate constant increased by seven.
As a result, the rate has increased by seven times from the beginning.
To know more about Reaction visit:
https://brainly.com/question/25769000
#SPJ4
Rank absorption of the indicated bonds in decreasing (highest to lowest) order of wavenumber. A. I > V > II > IV > III B. IV > II > I > V > III C. II > I > V> III > IV D. IV > I > V > II > III E. IV > II > V > I > III
The indicated bonds in decreasing order of wavenumber is E. IV > II > V > I > III
What is absorption?Atoms, molecules, or ions can enter a liquid or solid material by a process known as absorption, which can be physical or chemical in nature.
The order of absorption of the indicated bonds in decreasing order of wavenumber is IV > II > V > I > III.
This order is based on the strength of the bond and the functional group associated with it.
The order of the absorption of functional groups are typically based on the polarity and electron density of the bond.
In general, the more polar and electron-rich the bond, the higher the wavenumber of its absorption.
To know more about Atoms visit: brainly.com/question/1566330
#SPJ4
Predict the normal boiling point of hydrogen peroxide (H2O2) from the following data: ΔHºf, kJ/mol Sº, J/(mol • K) H2O2(ℓ) –187.8 110 H2O2(g) –136.3 233 Tb = Based on the estimated boiling point, is H2O2 a liquid or a gas at room temperature (25°C)? Why?
Choose one:
A liquid, because its estimated boiling point is less than 25°C.
A gas, because its estimated boiling point is less than 25°C.
A liquid, because its estimated boiling point is greater than 25°C.
A gas, because its estimated boiling point is greater than 25°C.
The correct option is: A liquid, because its estimated boiling point is greater than 25°C
What is boiling point?A liquid's boiling point is determined by the temperature at which its vapour pressure equals that of the gas above it. The temperature at which a liquid's vapour pressure equals one atmosphere is known as the normal boiling point of that liquid (760 torr).
When a substance's vapour pressure reaches parity with outside pressure, that point is known as its boiling point.
H₂O₂(l) ↔ H₂O₂(g)
ΔH⁰rxn = (ΔH⁰f, H₂O₂(g) - ΔH⁰f, H₂O₂(l))
or, ΔH⁰rxn = (-136.3-(-187.8))
or, ΔH⁰rxn = 51.5 KJ/mol
or, ΔH⁰rxn = (Δs⁰f, H₂O₂(g) - Δs⁰f, H₂O₂(l))
or, ΔH⁰rxn = (233 - 110)
or, ΔH⁰rxn = 123 J/mol.k
at the boiling point (Tb), ΔG⁰ = 0 (due to equilibrium)
As we know,
ΔG⁰ = ΔH⁰- TΔs⁰
or, 0 = 51.5*10^3 - (T*123)
or, T = boiling point of H₂O₂
or, T = 418.7 K
or, T = 418.7 - 273.15 K
or, T = 145.55 °C
As, boiling point of H₂O₂ is higher than room temperature (25°c). it is liquid.
Thus, a liquid, because its estimated boiling point is greater than 25°C.
To know more about boiling point refer to:
https://brainly.com/question/40140
#SPJ4
The reaction between strontium hydroxide and chloric acid produces __________.A) a molecular compound and a weak electrolyteB) two weak electrolytesC) two strong electrolytesD) a molecular compound and a strong electrolyteE) two molecular compounds
The reaction between strontium hydroxide and chloric acid produces: D) a molecular compound and a strong electrolyte. It is solved using the concept of acid-base.
What is acid-base reaction?The neutralization process, which produces a salt and water molecule, occurs when an acid and a base interact. Here, the reaction between the acids chloric acid and strontium hydroxide produces strontium perchlorate and two moles of water. The strong electrolyte strontium perchlorate entirely dissociates in one direction, similar to sodium chloride. Both strontium hydroxide and chloric acid are powerful acids and bases. According to Pearson's Hard Soft Acid Base Concept, ionic complexes are created when hard acid and hard base mix. Ionic complexes often completely dissociate and are thus regarded as strong electrolytes (in the present case Strontium perchlorate).
As far as we are aware, Sr is a group 2 alkaline earth metal. Because it produces basic oxides, when it reacts with acid, salt and water are produced. Since SrO is also a basic oxide in this instance, it may react with acids like HClO₄ (chloric acid) to produce salt and water.
Thus, it will form one molecular compound that is H₂O and one strong electrolyte that is Sr(ClO₄)₂.
The reaction is as follows:
SrO + 2HClO₄ → Sr(ClO₄)₂ + H₂O
To know more about acid-base refer to:
https://brainly.com/question/15334816
#SPJ4
Match the following descriptions of titration curves with the diagrams/Figure 1). Match the words in the left column to the appropriate blanks in the sentences on the right. diagram (i)
The diagram depicting the stration of a strong base added to a weak acid is diagram (ii) The diagram depicting the titration of a strong base added to a poly protic acid is diagram (iv) The diagram depicting the thration of a strong acid added to a strong base is diagram (iii) The diagram depicting the titration of a strong bate added to a strong acid is
The plot of the pH of the analyte solution vs the quantity of titrant applied over time is known as a titration curve.
Important information can be gleaned from a titration curve's shape, which is a plot of pH against the quantity of acid or base added. The titration of a strong base given to a strong acid that starts out with a low pH is shown in the diagram i. The titration of a strong acid applied to a strong base at a high pH is shown in diagram ii. The titration of a strong base added to a weak acid, which starts out with a low pH but is in the buffer region, is shown in diagram (iii). As there are many H+ ions present, the titration of a strong base added to polyprotic acid is shown in steps in diagram (iv).
To learn more about titration click here https://brainly.com/question/2728613
#SPJ4
draw all resonance structures for the nitric acid molecule, hno3 (no2oh).
Three oxygen atoms, one nitrogen atom, and one each of hydrogen and oxygen make up each nitric acid molecule.
How many resonance structures does HNO2 have?Three oxygen atoms, one nitrogen atom, and one each of hydrogen and oxygen make up each molecule of nitric acid. One of the oxygen atoms and the central nitrogen atom in HNO3 molecules are doubly bound. With the core nitrogen atom and a hydrogen atom, two additional oxygen atoms are singly linked.
The solution, however, demands the assumption that HNO2 only has one single bond (NO) and one double bond (N=O), and that these two bonds are not equivalent.
In HNO3, also known as nitric acid, H+ and NO3 ions are present in an aqueous solution of NO2 (nitrogen dioxide). Also triangular and flat in shape is the NO3 ion. So, nitric acid has a triangular planar form.
To learn more about nitric acid molecule refer to:
https://brainly.com/question/22698468
#SPJ4
What is the quotient 10 ÷ (-5)?
Answer:
-2
Explanation:
10 ÷ (-5) = -2
Maria is studying fungi in a forest. She makes some observations and takes some notes on a variety of fungi found on the forest floor. If Maria returned to the forest a year later and discovered that all the fungi were gone, what would she most likely observe as a result of this?
Answer:
Without fungi in the forest, dead and rotting materials would not be broken down, which would cause dead plants and animals to pile up in the forest.
Without fungi in the forest, dead and rotting materials would not be broken down. Fungi breaks down materials, and if fungi was not in the forest, the forest would have dead and rotting, plants and animals piled up everywhere.
Explanation: My frog taught me
Doing the test rn and says its right btw!
Hope I helped yall!
Which of the following is an aromatic compound that contributes to the beautiful scent of bacon? Your answer O a. Me N Me 2,5-dimethylpyrazine O b. Me Me Et 'N 2-ethyl-3,5-dimethylpyrazine O c. Both (a) and (b) O d. Neither (a) and (b)
2,5-dimethylpyrazine (a) is an aromatic compound that contributes to the beautiful scent of bacon.
What is 2,5-dimethylpyrazine?2,5-dimethylpyrazine is a compound that is known to contribute to the smoky, meaty aroma of cooked bacon. It is created by the Maillard reaction, which occurs when the sugars and amino acids in the bacon are heated, creating a complex mixture of flavors and aromas.
2-ethyl-3,5-dimethylpyrazine (b) is not an aromatic compound that contributes to the beautiful scent of bacon. It is a different compound that can be found in other food items, such as coffee, chocolate and roasted nuts.
So the answer is (a) and not (c) or (d)
To know more about aromatic compound visit: https://brainly.com/question/1351407
#SPJ4
How many peaks appear in the proton spin decoupled 13C NMR spectrum of the compound below?
Two peaks can be seen in the proton NMR spectra of the molecule below.
What is Proton nuclear magnetic resonance?In order to ascertain the structure of a substance's molecules, proton nuclear magnetic resonance uses nuclear magnetic resonance with regard to hydrogen-1 nuclei inside its molecules. The preferred method for determining or validating the structure of organic molecules or those containing protons is H NMR. When compared to other nuclei, a solution-state proton spectrum may be obtained relatively quickly, and it contains a wealth of knowledge regarding a compound's structure. Because proton spectra are considerably easier to acquire than carbon spectra, H NMR spectroscopy is employed more frequently than 13C NMR. Since just 1% of carbon atoms have the 13C isotope, it is challenging to find.
Learn more about Proton nuclear magnetic resonance refer to :
brainly.com/question/14470726
#SPJ4
A 2.0-liter closed container holds 1.0 mole of an ideal gas at a certain temperature and pressure. Which closed container will hold 3.0 moles of this ideal gas at the same temperature and pressure?
The volume of the closed container that will hold 3.0 moles of this ideal gas at the same temperature and pressure is 6L.
How to calculate number of moles?Avogadro's law is used to predict what will happen to the volume of a sample of gas as we change the number of moles. Because V/n is a constant for any given sample of gas (at constant P and T).
The volume of an ideal gas is directly proportional to the number of moles of the gas in a container. Hence, the following expression can be used:
V₁/n₁ = V₂/n₂
Where;
V₁ = initial volumen₁ = initial molesV₂ = final volumen₂ = final moles2/1 = V/3
V = 6L
Therefore, a 6L closed container can be used to hold the 3 moles ideal gas.
Learn more about Avogadro's law at: https://brainly.com/question/4133756
#SPJ1
What hybridization do you expect for the atom indicated in each of the following species? Explain. A) CH 3 CO 2 − for the last C B) PH 4 + for P C) AlF 3 for Al D) H 2 C=CH-CH 2 + for the last C
A) CH3CO2 for the last C- sp2 hybridization.
B) PH4+ for P: sp3 hybridization.
C) AlF3 for Al: sp3d2 hybridization.
D) H2C=CH-CH2+ for the last C: sp hybridization.
What is hybridization ?
Hybridization is the process by which atomic orbitals combine to form new hybrid orbitals with different energy levels and geometric shapes. These hybrid orbitals are used to form chemical bonds between atoms. The type of hybridization depends on the number of atoms and lone pairs of electrons surrounding the central atom in a molecule. Some common types of hybridization include sp3 (four orbitals), sp2 (three orbitals), and sp (two orbitals) hybridization.
A) CH3CO2- for the last C: The last C atom in CH3CO2- is bonded to one O atom and two C atoms. In order to form these bonds, the C atom needs to have three orbitals available for bonding, which means it is in sp2 hybridization.
B) PH4+ for P: The P atom in PH4+ is bonded to four H atoms. In order to form these bonds, the P atom needs to have five orbitals available for bonding, which means it is in sp3 hybridization.
C) AlF3 for Al: The Al atom in AlF3 is bonded to three F atoms. In order to form these bonds, the Al atom needs to have six orbitals available for bonding, which means it is in sp3d2 hybridization.
D) H2C=CH-CH2+ for the last C: The last C atom in H2C=CH-CH2+ is bonded to one H atom and one C atom. In order to form these bonds, the C atom needs to have two orbitals available for bonding, which means it is in sp hybridization.
To know more about Hybridization ,visit: https://brainly.in/question/7201042
#SPJ4
One disadvantage of coevolution is that:
if one of the two species becomes extinct, the other species may not be able to survive.
one species will likely evolve faster than the other.
only the species that have coevolved will survive if a natural disaster occurs.
the coevolved species will not be able to produce offspring.
Answer:
true
but it depends on their habitat and geographic location
Explanation:
hope this was helpful
A mixture is made by combining 1.50 lb
of salt and 4.45 lb
of water. What is the percentage of salt (by mass) in this mixture?
The mass percent of a component in a mixture is the ratio of its mass to the total mass multiplied by 100. The mass percent of salt in the mixture is 25.2 %.
What is percentage composition ?The percentage composition of a component in a compound or mixture is the fraction of that component in the total amount of the mixture. Mass percent is a common term used to express the concentration of a solution as well.
The mass percent of a component in a mixture is the ratio of its mass to the total mass of the mixture multiplied by 100.
Given the mass of salt = 1.50 lb
mass of water = 4.45 lb
total mass = 1.50 + 4.45 = 5.95 lb
Mass percent of salt = mass of salt/total mass
= 1.50 / 5.95 × 100 = 25%.
Therefore, the mass percent of the salt in the mixture is 25%.
Find more on mass percent:
https://brainly.com/question/5394922
#SPJ1
.pls ans my question interested girl come 15++ come fast
Answer:
wait so do you need help with
Explanation:
Which of the following orbital diagrams reflects an atom not in the ground state? O A
O B
O C
O D
O E
A
following orbital diagrams reflects an atom not in the ground state
What do you name an atom's ground state?The ground state of an atom is the lowest energy level it is capable of occupying. This is the atomic energy level that would be regarded as typical.
The electrons in an atom are shown in pictures called orbital diagrams. Orbital diagrams may be created using three rules. Each electron resides in the lowest-energy orbital, in accordance with the Auf Bau Principle. Only two electrons can fit into a single orbital, according to the Pauli Exclusion Principle.
learn more about ground state
https://brainly.com/question/1968924
#SPJ4
FILL IN THE BLANK. The _______ fluid is the substance to and from which heat is transferred in a heat engine or other cyclic device
The working fluid is the substance to and from which heat is transferred in a heat engine or other cyclic device.
A heat engine is a device that converts heat energy into mechanical energy, and a key component of a heat engine is the working fluid. The working fluid is the substance that is used to transfer heat in and out of the engine.
It is the fluid that is heated and cooled during the process of converting heat into mechanical energy. The working fluid is typically a liquid or gas, and it is chosen based on its ability to efficiently transfer heat, its cost, and its availability.
The working fluid is cycled through the engine, absorbing heat from a high-temperature source, then losing heat to a low-temperature sink, and the process repeats. The working fluid plays a crucial role in the efficiency and performance of the heat engine.
To learn more about the fluid at
https://brainly.com/question/1823632?referrer=searchResults
#SPJ4
Draw the two enantiomers that are obtained upon bromination of (S)-3-methylhexane.
Radical bromination of (S)-3-methylhexane results in 3-bromo-3-methylhexane as the main byproduct, which is optically inactive. The branching hydrocarbon 3-methylhexane has two enantiomers. It belongs to the family of heptane isomers.
One of heptane's two structural isomers, 2,3-dimethylpentane, and this particular molecule both possess the chirality property. They are (R)-3 methylhexane and (S)-3 methylhexane, respectively. Bromomethane is the natural product. This is a substitution process because one of the hydrogen atoms in the methane has been swapped out for a bromine atom. Enantiomers are stereoisomers that cannot be superimposed mirror images of one another. Depending on how each stereocenter is set up, enantiomers are different. In terms of handedness, they can be compared to gloves for the right or left hand.
To find more on stereoisomers refer here:
https://brainly.com/question/18120547
#SPJ4
Consider the enzyme-catalyzed reaction with Vmax=164 (μmol/L)min−1 and KM=32 μmol/L.
Part A
If the total enzyme concentration was 1 nmol/L, how many molecules of substrate can a molecule of enzyme process in each minute?
Part B
Calculate kcat/KM for the enzyme reaction.
Part - A 164000 molecules of substrate can a molecule of enzyme process in each minute.
Part - B The kcat/KM for the enzyme reaction is 85.416×10⁶ (M.s)⁻¹
An enzyme-catalyzed reaction is what?An enzyme will attach itself to one or more reactant molecules and start the reaction by catalyzing it. These molecules are the substrates for the enzyme. One substrate may undergo several product breakdowns in some reactions. Others involve the fusion of two substrates into a single larger molecule or the exchange of individual molecules.
The place on an enzyme's surface where substrates bind and the chemical reaction it catalyzes take place is called the active site of the enzyme.
(A)kcat = turnover number
kcat = Vmax/[Etotal] = ( 164×10⁻⁶ (mol/L)min⁻¹ )/(1×10⁻⁹ mol/L)
kcat = 164000 min⁻¹
(B) kcat/kM = ( 164000 min⁻¹ / 32×10⁻⁶M )
kcat/kM = 5125×10⁶ (M.min)⁻¹
kcat/kM = 85.416×10⁶ (M.s)⁻¹.
To know more about enzyme-catalyzed reaction visit:
https://brainly.com/question/3055518
#SPJ4
7. A substance that had a mass of 786 grams and it was found that there were
17.86 moles was regularly used by firefighters. What is the identity?
Mass, moles and the use by firefighters are not sufficient to determine the identity of a substance. To identify a substance, more information such as chemical and physical properties, chemical reactions, and spectral data are typically required.
What is mass and mole?Mass is a scalar quantity that measures the amount of matter in an object. It is typically measured in units of grams (g) or kilograms (kg). The mass of an object does not change with location, unlike weight which does change with the gravitational force acting upon it.Moles (mol) is the unit of measurement for amount of substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12. Moles can be used to express the concentration of a solution, the number of atoms in a sample, or the amount of material in a reaction.The number of moles can be calculated by dividing the mass of a substance by its molar mass (the mass of one mole of the substance).To learn more about mass and mole refer:
brainly.com/question/24191825
#SPJ1
classify the following aldehydes and ketones as soluble in water or not very soluble in water.
Drag the appropriate items to their respective bins.
Soluble Not very soluble
For the following aldehydes and ketones .1 , 4 , 5 are soluble and remaining are not very soluble . ether= CH3CH2OCH2CH3,diethyl ether. Ester= CH3COOCH3, ethyl hexanoate, methyl benzoate, remaining are neither ether nor ester
Aldehydes and ketones are two types of organic compounds that belong to a class of compounds known as carbonyl compounds. The defining feature of these compounds is the presence of a carbonyl group (C=O), which is a carbon atom double-bonded to an oxygen The general structural formula for an aldehyde is R-C(=O)-H, where R can be any organic group. Ketones, on the other hand, have the carbonyl group in the middle of the carbon chain and are characterized by the general structural formula R-C(=O)-R', where R and R' can be any organic group
know more about aldehydes here:
https://brainly.com/question/29756072
#SPJ4
the complete question is:
classify the following aldehydes and ketones as soluble in water or not very soluble in water.
Drag the appropriate items to their respective bins.
Soluble Not very soluble
Show how the following compounds can be prepared, using ethyne as one of the starting materials: 1. 1-pentyn-3-ol 2. 1-phenyl-2-butyn-1-ol 3. 2-methyl-3-hexyn-2-ol
Ethyne (acetylene) was first discovered in 1836 by the Irish chemist Edmund Davy as a by-product during the medication of metallic potassium by heating an intermixture of calcined potassium tartrate with charcoal.
How is ethyne formed?Carbon dioxide, water, and heat are produced when ethanol burns in the atmosphere with a sooty flame. Together with hydrogen, ethyne first produces ethene and then ethane. 1,2-Tetra halo ethanes are created when ethyne interacts with halogen acids.
Ethyne has the chemical formula C2H2. This substance is an unsaturated hydrocarbon, and in its pure form, it is incredibly unstable. Due to its two carbon atoms, which are triple linked to one another, ethyne is referred to as the most basic alkyne.
All four atoms in the ethyne molecule are aligned in a straight line because it is a linear molecule. The triple bond between carbons is just 1.20 long. In the acetylene hybrid orbital, both carbons are sp- hybridised.
To learn more about ethyne refer to:
https://brainly.com/question/14668529
#SPJ4
Passage 1
Passage 2
Dorothy Parker (1893-1967) was an American short-story
writer, poet, and critic best known for her satiric wit
This excerpt is from her essay titled Henry' in her book
Men Im Not Married To.
from "Henry"
by Dorothy Parker
You would really be surprised at the number of
things that Henry knows just a shade more
about than anybody else does. Naturally he
can't help realizing this about himself, but you
mustn't think for a minute that he has let it
spoil him. On the contrary... [w]hen it comes
to giving his time and his energy there is
nobody who could not admit that Henry is
Passage 1
Passage 2
Passage 1 Passage 2
Drag ONE sentence to EACH box to compare and
contr themes in Passage 1 and Passage 2.
Both
generous. To a fault, I have even heard people
go so far as to say.
... And that is the way Henry is about
everything. He will stroll over to a tennis court,
and stand on the side lines, at what I am sure
must be great personal inconvenience, calling
words of advice and suggestion for sets at a
stretch. I have even known him to follow his
friends all the way around a golf course,
offering constructive criticism on their form as
he goes. I tell you, in this day and generation,
you don't find many people who will go as far
out of their way for their friends as Henry does.
And I am far from being the only one who says
so, too.
strong friendships are based on emotion rather than
intellect.
Friends who remain detached from others may risk
friendships that expose their faults.
Friends who flaunt their perceived superiority may
risk losing friendships.
Most friendships are complicated because people are
imperfect.
What mass in grams of hydrogen is produced by the reaction of 4.73 g of magnesium with 1.83 g of water? (Mg =24, H = 1, O = 16)
Mg (s) + 2H2O (l) → Mg(OH)2 (s) + H2 (g)
a) 0.204
b) 0.051
c) 0.0162
d) 0.219
At long last, change over moles to grams by increase it by the molar mass (0.1017 * 2)= 0.204 grams.
To begin with, you make a proportion between the reactants (H2O & Mg) to decide the restricting reactant so 2 mol H2O/ 1 mol Mg = 2 _calculate moles of Mg (mass/molar mass) = (4.73/24)= 0.197
moles _calculate moles of H2O (mass/molar mass) = (1.83/18)= 0.1017 moles make the proportion once more between H2O & Mg= (0.1017/0.197)= 0.5
So, H2O is the restricting reactant and as you would like the mass of H2 by comparing its moles with moles of H2O, you'll get 0.1017 moles.
Finally, change over moles to grams by duplicate it by the molar mass (0.1017 * 2)= 0.204 grams
To learn more about molar mass here:
https://brainly.com/question/12127540
#SPJ4
Predict the product, if any, of reaction between propanamide and 2 CH3MgBr, then H3O+. Draw only the product derived from the acyl portion of propanamide. You do not have to consider stereochemistry. If no reaction occurs, draw the organic starting material.
The product derived from the acyl portion of propanamide is attached below.
What is stereochemistry, and how does it work?The study of the various spatial arrangements of atoms in molecules is the focus of the branch of chemistry known as stereochemistry. Stereochemistry is the systematic presentation of a particular area of science and technology that customarily necessitates a brief prelude into history.
Because propanamide contains a primary amine group, the carbon centre will become less electrophilic as a result. As a result, resonance structure will form, which will reduce the reactivity of the electrophilic carbon and eliminate the possibility of a high-yield product formation.
To know more about stereochemistry visit:
https://brainly.com/question/13266152
#SPJ4
After the rising phase, which ion channel is responsible for action potential returning to its
resting Vm and why?
A. Na+ channels, because positive Na* ions are at higher concentration outside the axon than inside, and so they enter the axon and raise Vm
B. Na+ channels, because positive Na+ ions are at higher concentration inside the axon than outside, and so they leave the axon and raise Vm
C. K* channels, because positive K+ ions are at higher concentration outside the axon than inside, and so they enter the axon and raise Vm
D. K channels, because positive K* ions are at higher concentration inside the axon than outside, and so they leave the axon and lower V m
Na+ channels enter the neuron and increase Vm because the positive Na+ ions are more abundant concentration outside the cell than inside.
The ratio of a constituent's abundance to the total volume of the mixture is its concentration. Mass concentration, molar concentration, number concentration, and volume concentration are a few of the various categories of mathematical description. Information is sent via neurons. Electrical impulses and chemical signals are used to transport information inside different brain areas as well as between the brain and the rest of the nervous system. The two primary subtypes of brain cells are neurons and glial cells. Although they play a supporting role in the brain, glial cells predominate over neurons in numerous areas of the organ.
Learn more about concentration here :
https://brainly.com/question/10725862
#SPJ4
Determine the solubility of the ions that is calculated from the Ksp for Na3PO4.
Answer choices:
9S4
S4
27S3
3S2
27S4
From the Ksp for Na3PO4, the solubility of the ions is determined to be 27S4. Solubility is a term used in chemistry to describe a substance's capacity to mix with another substance, the solvent.
Na+ and PO4-3 are the ions found in Na3PO4. Since sodium is listed on the periodic table as an alkali metal, it will create a positive charge in solution. A polyatomic ion is one that requires its charge to be remembered, such as the phosphate ion. Therefore, each unit of sodium phosphate that dissolves produces 4 ions. As a result, each molecule of Na3PO4 has a total of four ions in the solution.
Na3PO4 -> 3Na+ + [PO4 3-]
Let the solubility of each ion be S such that
Ksp = [Na+]^3 [(PO4)3-]
Ksp = (3S)^3 (S) = 27S^4 as there are 3 sodium ions and 1 phosphate ion.
To learn more about solubility click here https://brainly.com/question/28170449
#SPJ4
Ozone layer sentence
Answer:
The ozone layer is a layer of the Earth's atmosphere that protects us from the sun's harmful UV radiation.