a scientist mixes 0.02 g of a strong base in 83 ml of water and obtains a ph of 12. he then realizes that he forgot to label the container and forgot what base he added. what is the most likely the identity of this base? a) LiOH. b) NaOH. c) RbOH. d) KOH

Answer:

Ernest Rutherford used alpha particles in his famous gold foil experiment to test the Plum Pudding Model of atomic structure because they have a high energy and a large mass.

The Plum Pudding Model proposed by J.J. Thomson suggested that atoms consisted of a uniform, positively charged sphere with negatively charged electrons embedded within it, much like plums in a pudding. However, Rutherford's observations of the scattering of alpha particles as they passed through the gold foil showed that the Plum Pudding Model was incorrect.

When Rutherford directed a beam of alpha particles at a thin sheet of gold foil, he expected the alpha particles to pass straight through or be slightly deflected by the electrons in the gold atoms. However, he observed that a small fraction of the alpha particles were deflected at large angles or even bounced back in the direction from which they came. This could only be explained if the mass of the atom was concentrated in a small, positively charged nucleus at the center, surrounded by mostly empty space.

The reason that Rutherford used alpha particles in his experiment was because their high energy and large mass allowed them to penetrate the atoms of the gold foil and interact with the positively charged nucleus, revealing its presence and disproving the Plum Pudding Model.

Explanation:

Answer:

Rutherfords gold foil experiment involved sending positively charged alpha particles through a thin sheet of gold foil and defecting if there was any deflection of the particles. He found that most passed straight through yet some particles showed some deflection. This result contradicts the plum-pudding model of the atom because the plum pudding model does not explain the deflection of alpha particles.

Explanation:

Alpha particles are positive, so they might be repelled by any areas of positive charge inside the gold atoms. Assuming a plum pudding model of the atom, Rutherford predicted that the areas of positive charge in the gold atoms would deflect, or bend, the path of all the alpha particles as they passed through.

While at rest, a normal animal cell has a high concentration of K+ ions within and a high concentration of Na+ ions outside. Outside of the cell, there are also more Cl- ions present.

While at rest, a normal animal cell has a high concentration of K+ ions within and a high concentration of Na+ ions outside. Outside of the cell, there are also more Cl- ions present. As a result, the cell membrane experiences an electrical potential differential and concentration gradient. At a typical resting potential of -70 mV, the potential difference is negative inside the cell and positive outside the cell. This potential is kept constant and allows for cell processes like signalling and metabolism by the passage of ions across the membrane via ion channels and pumps. The total charge balance inside the cell is also influenced by other anions, such as proteins and phosphates.

Learn more about concentration of Na+ ions here:

https://brainly.com/question/12608621

#SPJ4

Therefore, it is important for the path of a circuit to be circular to ensure a continuous flow of electricity and proper functioning of electrical devices.

An electrical circuit is a complete path or loop through which an electric current can flow. It is a system of interconnected components, such as batteries, wires, resistors, capacitors, inductors, and switches, that are designed to perform a specific function, such as lighting a light bulb or powering an electronic device. In a circuit, an electric current flows from the power source, such as a battery or a generator, through the components and back to the source. The components in the circuit may modify the current in various ways, such as by changing its voltage, current, or phase.

Here,

In an electric circuit, the path of the current must be circular to ensure a continuous flow of electricity. When the circuit is complete, the current flows from the power source (e.g. battery or generator) through the wires, components (e.g. resistors, capacitors), and back to the source. If the path of the circuit is not circular, the current cannot flow continuously, and the circuit will not work. For example, if there is a break in the circuit, such as a disconnected wire or open switch, the current will not be able to complete the circuit and will stop flowing. In other words, the circuit must form a complete loop for the current to flow and for electrical devices to work.

To know more about circuit,

https://brainly.com/question/16668006

#SPJ1

Here, the temperature of the hot water is dropping means the temperature is absorbed from the surrounding. Thus, the reaction is endothermic. Therefore, we cant agree to the finding of Paul.

An endothermic reaction is the reaction in which the reactants absorbs heat energy to proceed the reaction. The enthalpy change during an endothermic reaction is positive.

In an exothermic reaction, heat energy is evolved from the system to the surroundings. Thus, the enthalpy change is negative here. The reactants when absorbs heat from the surroundings, the outside temperature drops. We feel cool in the reaction vessel.

Whereas in an exothermic reaction, the outside temperature increases by evolving heat from the reaction. Thus, we will feel hot on the reaction vessel. Here, the water temperature is decreasing which means the reaction is endothermic and not exothermic.

Find more on endothermic reactions:

https://brainly.com/question/10373907

#SPJ1

0.789 g/mL is the density of ethanol g mL.

The density of ethanol is heavily influenced by the temperature but also the pressure of the local environment. Changes in temperature and surroundings cause changes in the volume of this solvent, which causes changes in its density.

Ethanol, also known as ethyl alcohol or alcoholic beverage, is a colorless volatile liquid that is widely employed as a solvent in the preparation of substances for personal food or contact. Ethanol is made from granules (such as corn) and grasses (such as switch grass).

It is primarily made from grains that have high sugar content. Its density is important in its many applications, which span from being a potent mind-altering drug in various hard liquor to a renewable fuel in automobiles.

learn more about the density of ethanol here:

https://brainly.com/question/17889086?referrer=searchResults

#SPJ4

Answer:

12g/mol

Explanation:

you can use the periodic table to find this information, just look for C (carbon) and the atomic mass will be next to it

Answer:

they form a cocoon as a transition stage

Aluminum chloride formula is AlCl3 because it is an ionic compound that is formed between aluminum cations (Al3+) and chloride anions (Cl-). In this compound, each aluminum ion donates three valence electrons to three chloride ions, forming three Al-Cl bonds.

Aluminum has three valence electrons in its outermost energy level, while chlorine has seven valence electrons. By gaining one electron from aluminum, each chlorine atom can complete its outermost energy level with eight electrons (an octet), following the octet rule. Each Al ion can bond with three Cl ions to complete the octet rule and form a stable compound. The resulting formula AlCl3 reflects the fact that each aluminum ion is bonded to three chloride ions, and each chloride ion is bonded to one aluminum ion.

For such more questions on Compound

https://brainly.com/question/30667323

#SPJ4

109.5

when we see it in 3d dimension...the repulsion force of the bonding pairs maximaze the distance from each other, thus making the angle 109.5

The substances having common ion cannot form precipitate during chemical change.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.Ions are generated when substance is subjected to electrolysis.

Learn more about ions,here:

https://brainly.com/question/14982375

#SPJ9

The conditions that are necessary for hail to form is The freezing temperature of the air below the cloud causes the water droplets to freeze.

It should  benoted that the Clouds form  asd a result of the invisible water vapor in the air whichcondenses into visible water droplets whichis been conidered as the ice crystals.

It should benoted that  this can take place  wheen the parcel of air must be saturated, which implies that iot can no longer hold all the water it contains in vapor form,  then it turns to condense into a liquid or solid form.

Learn more about hail at:

https://brainly.com/question/1783904

#SPJ1

Answer:

The atomic mass of sodium is 23 g/mol

Explanation:

Sodium's atomic mass is 11 + 12 = 23. As a result, 1 mole of sodium equals 23 grams. We know that because sodium's atomic mass is 23, we can write it as 23 g/mol.

The transition metals are elements with partially filled d subshells. These elements are found in the middle of the periodic table.

Transition metals are elements with partially filled d subshells. These elements are found in the middle of the periodic table, between the alkali and alkaline earth metals on the left and the metalloids and non-metals on the right. The transition metals include elements like iron, copper, silver, and gold. They are known for their ability to form multiple oxidation states, which allows them to participate in a wide range of chemical reactions. The d subshell in transition metals is responsible for these unique properties, and it is partially filled with electrons.

Learn more about transition metals here: brainly.com/question/30551806

#SPJ4

Answer:

I think Flour causes poisoning

The option that is NOT a reason to record accurate procedures and results during an experiment is: "Its not that important to record accurate procedures or data."

It is critical to record correct procedures and results so that others may reproduce the experiment and the researcher can repeat it in the future. Proper documentation also aids in the identification of any flaws or inconsistencies that may have happened during the experiment and may be resolved in future studies. Accurate protocol documentation enables other researchers to reproduce the experiment and confirm the findings. Replication is an important part of scientific study since it helps to establish the results' validity and dependability. If the techniques are not adequately documented, subsequent researchers may be unable to replicate the experiment, resulting in differences and doubt regarding the results.

For more such questions on experiment, click on:

https://brainly.com/question/17274244

#SPJ4

A. The reaction will shift toward the products (Right).

In the given system, the forward reaction is represented by the equation 2NO(g) + O2(g) ⇌ 2NO2(g) + 113.06 kJ

When NO gas is added to the container, it increases the concentration of one of the reactants. According to Le Chatelier's principle, if there is a change in the conditions of a system at equilibrium, the system will adjust to counteract that change.

In this case, adding more NO gas increases its concentration. To counteract this increase, the system will shift in the direction that reduces the concentration of NO, which is the reactant.

The system will shift towards the products (right) to consume some of the additional NO, in order to restore equilibrium.

Learn more about equilibrium at:

https://brainly.com/question/30807709

#SPJ2

In 7.00 x 10²² molecules of NaOH, there are 0.465 grams.

To find out how many grams are 7.00 x 10²² molecules of NaOH, we need to use Avogadro's number in the formula:

mass = number of molecules x molar mass / Avogadro's number

First, let's find the molar mass of NaOH.

So, the molar mass of NaOH is:

22.99 g/mol + 16.00 g/mol + 1.01 g/mol = 40.00 g/mol

Next, let's plug in the values into the formula:

mass = (7.00 x 10²² molecules) x (40.00 g/mol) / (6.02 x 10²³ molecules/mol)

mass = 2800 x 10²² g / 6.02 x 10²³

mass = 4.65 x 10⁻¹ g

mass = 0.465 g

So, 7.00 x 10²² molecules of NaOH are equal to 0.465 grams.

Learn more about Avogadro's number here https://brainly.com/question/29367909

#SPJ11

The Kcat for the reaction at the pH 4.5 when no chloride is added when compound 3 is substrate is 2.5 × 10⁻² s⁻¹.

The concentration value of the enzyme is 5.0 uM, and the rate of the product formation for the compound 3 is 125 nM/s. The enzyme is saturated with the substrate because of the rate of the product synthesis and it did not change over the time of the first five minutes. The kcat value is  as follows :

Kcat = Vmax / [E]

= 125 nM/s / (5.0 uM)

= 2.5 × 10⁻² s⁻¹

thus, the Kcat value for the reaction  at the pH of 4.5 when no chloride is added and the compound 3 is the substrate is 2.5 × 10⁻² s⁻¹.

To learn more about Kcat here

https://brainly.com/question/4745688

#SPJ4

The molarity of the 1.5 liters of the aqueous solution containing 52 grams of lithium fluoride is 1.334 M.

The molarity of the solution can be calculated using the formula,

Molarity (M) = moles of solute / volume of solution in liters

The number of moles of LiF present in the solution,

Molar mass of LiF = 6.941 + 18.998 = 25.939 g/mol

Number of moles of LiF = mass of LiF / molar mass of LiF

Number of moles of LiF = 52 g / 25.939 g/mol = 2.002 mol

Next, we need to convert the volume of the solution from liters to moles:

Volume of solution = 1.5 L

Molarity (M) = 2.002 mol / 1.5 L = 1.334 M

Therefore, the molarity of the solution is 1.334 M.

To know more about the molarity, here

brainly.com/question/8732513

#SPJ4

This type of heat transfer is called convection. The fluid above a hot surface expands, becomes less dense, and rises.

Transmission is the movement of heat by a fluid such as water or air. The fluid (liquid or gas) moves from one position to another, transferring heat along with it. Radiation heat transfer is a procedure where heat waves are emitted that may be soaked up and reflected

Heat transferred per unit time relocation heat transfer coefficient heat-transfer area of the aspect temperature of the surface and temperature of the fluid.

So we can conclude that displacement is the heat transfer by the macroscopic movement of a fluid. This type of transfer takes place in an exacted-air furnace and in weather institutions.

Learn more about heat transfer here: https://brainly.com/question/16055406

#SPJ1

When balancing a chemical equation, keep in mind that we are only permitted to alter the coefficients before a formula, not the subscripts within the formula.

What is a chemical equation?

Symbols are used in chemical equations to indicate things like the direction of a reaction and the physical states of the reacting parties. In the year 1615, the French scientist Jean Beguin created the first chemical equation.

Chemical equations can be used to depict chemical processes on paper. An illustration of that is provided below (for the reaction between hydrogen gas and oxygen gas to form water).

2[tex]H_{2}[/tex]+ [tex]O_{2}[/tex]→ 2[tex]H_{2}[/tex]O

As seen in the illustration given above, the reacting entities are written on the left side of the chemical equation, while the products created during chemical reactions are written on the right side.

The identities of the substances are altered by altering the subscripts in a formula. The formulas themselves cannot be changed because the equation reflects an actual chemical reaction.

Learn more about chemical equation:

https://brainly.com/question/26694427

#SPJ4

°C is the symbol used for degrees Celsius, a unit of temperature in the metric system.  Thus, option D is the answer.

°C is the symbol used to represent degrees Celsius, which is a unit of temperature in the metric system. It is named after the Swedish astronomer Anders Celsius, who first proposed the Celsius temperature scale in 1742.

The Celsius scale is based on the freezing and boiling points of water, with 0 °C being the temperature at which water freezes and 100 °C being the temperature at which water boils at standard atmospheric pressure.

The Celsius scale is widely used in scientific and engineering applications, as well as in everyday life, particularly in countries that use the metric system. It is an important measurement in areas such as weather forecasting, medicine, and industrial manufacturing.

Learn more about degrees Celsius:

https://brainly.com/question/25936097

#SPJ4

The electrons on the outermost energy level of an atom are called Valence electrons.

Electrons located in this outer shell are called valence electrons and this shell is called valence shell. Normally, an atom is in its most stable and least active state when its outermost shell of electrons is full.

The electrons in the shell or energy level of the atom are called valence electrons.

The number of valence electrons of the neutral atom is the same as the number of the main group of the atom. The columns of an element in the periodic table can be used to determine its main group number.

For example, carbon belonging to group 4 has four valence electrons.

To know more about valence electrons, visit,

https://brainly.com/question/371590#:~:text=Expert%2DVerified%20Answer&text=Valence%20electrons%20are%20the%20electrons,Electrons%20are%20outside%20them%20both.&text=And%20the%20number%20they%20have,layer%20are%20the%20valence%20electrons.

#SPJ4

This can be explained by the ideal gas law, which states that pressure is proportional to the number of gas molecules within a container at a constant temperature. Therefore, as more gas molecules are produced during the reaction, the pressure within the container will increase.

What is Gas Law?

Gas laws are a set of fundamental principles that describe the behavior of gases under different conditions of temperature, pressure, and volume. The most commonly studied gas laws are Boyle's law, Charles's law, Gay-Lussac's law, and the combined gas law. Boyle's law states that at a constant temperature, the volume of a gas is inversely proportional to its pressure. Charles's law states that at a constant pressure, the volume of a gas is directly proportional to its temperature.

Gay-Lussac's law states that at a constant volume, the pressure of a gas is directly proportional to its temperature. The combined gas law combines these three laws to relate pressure, volume, and temperature of a gas. Gas laws are important in understanding the behavior of gases in many real-world applications, such as in chemical reactions, combustion engines, and weather forecasting.

The pressure inside the container will increase as the reaction occurs. This is because the reaction between magnesium and hydrochloric acid produces hydrogen gas, which is a gas that occupies space within the container. As the amount of gas within the container increases, the pressure inside the container will also increase if the temperature is held constant.

Learn more about   Gas Law  from given link

https://brainly.com/question/27870704

#SPJ1

The effect of assuming that the solution volume is the same as the solvent volume on the calculated solution density is that the calculated solution density will be lower than the actual density.

This is because the addition of the solute, in this case, sugar, increases the overall volume of the solution compared to the volume of the solvent alone.

When the student measured the mass of the solution accurately, they would have obtained the correct value for the total mass of the solution. However, if the volume of the solution is underestimated, the calculated density would be lower than the actual density, as the density is the mass of the solution divided by its volume.

To obtain an accurate density value, it is important to measure both the mass and volume of the solution, accounting for the volume contribution of the solute.

Learn more about volume:

brainly.com/question/1578538

#SPJ4

The majority of natural earthquakes occur on fault lines, which are typically (but not always) located where tectonic plates collide in earth.

The Earth and its moon formed at the same time as the other planets in the solar system. That incident occurred 4.5 trillion years ago, according to estimates. Earth is the fifth-largest planet in the solar system. Despite only being the sixth largest planet overall, Earth is the only exoplanet that has liquid water on its surface.

A planetary system. These planets and celestial bodies are attracted to the Sun and revolve around it. Our solar system is made up of Jupiter, Venus, Earth, Mars, and the Sun, a typical star.

To know more about  Earth visit :

brainly.com/question/12041467

#SPJ1

Protecting forests and planting new trees have significantly diminished the effects of global warming on land.

Generally, Global warming is defined as the long-term heating of Earth's surface observed since the pre-industrial period (which is the period between 1850 and 1900) due to human activities, primarily fossil fuel burning, which increases heat-trapping greenhouse gas levels in Earth's atmosphere. This term is usually not interchangeable with the term "climate change.

Basically afforestation is defined as the planting of saplings, trees to increase forest cover. Afforestation is basically a measure that is taken to protect and conserve our environment from the harmful effects of pollution and human development.

Learn more about Global warming from the link given below.

https://brainly.com/question/29625243

#SPJ4

To construct the reaction quotient Qc for a given chemical reaction, the concentrations of the products are placed in the numerator and the concentrations of the reactants are placed in the denominator. Each concentration term is raised to the power of its stoichiometric coefficient from the balanced equation.

The resulting expression is the reaction quotient, Qc:

Qc = [tex][C]^{c^ }[/tex][tex][D]^{d}[/tex]  / [tex][A]^{a}[/tex][tex][B]^{b}[/tex]                  

where [A], [B], [C], and [D] are the molar concentrations of the reactants and products, and a, b, c, and d are the stoichiometric coefficients of the balanced chemical equation.

The reaction quotient, Qc, is similar to the equilibrium constant, Kc, which is calculated using the same equation but under equilibrium conditions, where the reaction has reached its equilibrium state.

At equilibrium, the reaction quotient and the equilibrium constant have the same numerical value. If Qc < Kc, the reaction will proceed forward to reach equilibrium. If Qc > Kc, the reaction will proceed in reverse direction to reach equilibrium. If Qc = Kc, the system is at equilibrium.

To know more about reaction quotient here

https://brainly.com/question/24202150

#SPJ4

The correct option is B , from the matrix to the intermembrane space.

The electron transport chain pumps protons from the matrix to the intermembrane space.

Protons are pushed out of the matrix and into the intermembrane space as a result of the electrons moving through the electron transport chain.

The electron transport chain in bacteria that use it to produce energy pushes H+ out of the cell, creating a proton-motive force across the plasma membrane that drives the ATP synthase to produce ATP.

The production of adenosine triphosphate is fueled by the protons that travel back from the intermembrane to the matrix in the mitochondria and from the thylakoid to stroma in the chloroplast via ATP synthase. As a result, both the stroma of chloroplasts and the matrix of mitochondria synthesize adenosine triphosphate.

To know about electron transport

https://brainly.com/question/18686654

#SPJ4

When a solution of a2 is mixed with one containing c- ions, the color remains green therefore a2 is not a better oxidizing agent than c2.

This is a substance in a redox chemical reaction that gains or "accepts"/"receives" an electron from a reducing agent and is any substance that oxidizes another substance.

In this scenario we should note that:

Read more about Oxidizing agent here https://brainly.com/question/14041413

#SPJ1