A wildlife photographer photographs a crocodile and then paddles against a river current for 6 km. Then, hoping to photograph a hippopotamus, she paddles 15 km across a lake. She paddles across the lake for one hour longer than she paddled up the river. Find the speed of the boat as she paddles the lake if the river current is 2 km/h.

Answer:

[tex]x=\frac{-5}{2}[/tex]

Step-by-step explanation:

[tex]f(x)=x^6+3x^5+2\\\\\implies f'(x)=6x^5+15x^4\\\\Equate\ f'(x)\ to\ 0\ for\ critical\ points\ (\ \because f'(x)=0\ at\ points\ of\ local\ extrema):\\\\3x^4(2x+5)=0\\\\x=0\ (or)\ x=\frac{-5}{2}\\\\\hrule\ \\\\\ (Second Derivative Test for x=(-5/2) )\\\\f''(x)=30x^4+60x^3\\\\f''(0)=0\ \ \implies Use\ first\ derivative\ test\ at\ x=0\\\\f''(\frac{-5}{2})=30(\frac{-5}{2})^3\cdot(\frac{-5}{2}+2)\\\\It\ is\ evident\ that\ f''(\frac{-5}{2}) > 0\\\\\implies x=\frac{-5}{2}\ is\ a\ point\ of\ local\ minima.[/tex]

[tex]\\\\\hrule\ \\\\\ (First Derivative Test for x=0 )\\\\f'(x)=3x^4(2x+5)\\\\f'(-0.1)=3(-0.1)^4\cdot(-0.2+5) > 0\\\\f'(0.1)=3(0.1)^4\cdot(0.2+5) > 0\\\\\implies x=0\ is\ a\ point\ of\ inflexion.\\\\[/tex]

The function has only one local minimum at x-coordinate equals to -2.5.

To find the local minima of the function f(x) = x⁶ + 3x⁵ + 2, we need to find the critical points of the function where f'(x) = 0 or is undefined.

Setting f'(x) = 0, we get:

This gives us two critical points:

To determine if these are local minima, we need to look at the sign of the derivative on either side of each critical point.

For x < -2.5, f'(x) < 0, indicating a decreasing function. For x > -2.5, f'(x) > 0, indicating an increasing function. Thus, -2.5 is a local minimum.

For x < 0, f'(x) < 0, indicating a decreasing function. For x > 0, f'(x) > 0, indicating an increasing function. Thus, 0 is not a local minimum.

Therefore, the x-coordinate of the only local minimum is -2.5.

Learn more about derivative

brainly.com/question/23847661

#SPJ11

the upper sum for f(x) = 17 - [tex]x^{2}[/tex] on the interval [3, 4] using four subintervals is approximately 6.46875.

To calculate the upper sum, we divide the interval [3, 4] into four subintervals of equal width. The width of each subinterval is (4 - 3) / 4 = 1/4.

Next, we evaluate the function at the right endpoint of each subinterval and multiply it by the width of the subinterval. For this function, we need to find the maximum value within each subinterval. Since the function f(x) = 17 - [tex]x^{2}[/tex] is a downward-opening parabola, the maximum value within each subinterval occurs at the left endpoint.

Using four subintervals, the right endpoints are: 3 + (1/4), 3 + (2/4), 3 + (3/4), and 3 + (4/4), which are 3.25, 3.5, 3.75, and 4 respectively.

Evaluating the function at these right endpoints, we get: f(3.25) = 8.5625, f(3.5) = 10.75, f(3.75) = 13.5625, and f(4) = 13.

Finally, we calculate the upper sum by summing the products of each function value and the subinterval width: (1/4) × (8.5625 + 10.75 + 13.5625 + 13) = 6.46875.

Learn more about subinterval here:

https://brainly.com/question/27258724

#SPJ11

The cubic function that has a local maximum value of 4 at 1 and a local minimum value of –1,184 at 7 is:

[tex]f(x) = (-28/15)x^3 + (59/15)x^2 - 23x - 149/3[/tex]

We can start by writing the cubic function in the general form:

[tex]f(x) = ax^3 + bx^2 + cx + d[/tex]

To find the coefficients of the function, we can use the given information about the local maximum and minimum values.

First, we know that the function has a local maximum value of 4 at x = 1. This means that the derivative of the function is equal to zero at x = 1, and the second derivative is negative at that point. So, we have:

f'(1) = 0

f''(1) < 0

Taking the derivative of the function, we get:

[tex]f'(x) = 3ax^2 + 2bx + c[/tex]

Since f'(1) = 0, we have:

3a + 2b + c = 0 (Equation 1)

Taking the second derivative of the function, we get:

f''(x) = 6ax + 2b

Since f''(1) < 0, we have:

6a + 2b < 0 (Equation 2)

Next, we know that the function has a local minimum value of -1,184 at x = 7. This means that the derivative of the function is equal to zero at x = 7, and the second derivative is positive at that point. So, we have:

f'(7) = 0

f''(7) > 0

Using the same process as before, we can get two more equations:

21a + 14b + c = 0 (Equation 3)

42a + 2b > 0 (Equation 4)

Now we have four equations (Equations 1-4) with four unknowns (a, b, c, d), which we can solve simultaneously to get the values of the coefficients.

To solve the equations, we can eliminate c and d by subtracting Equation 3 from Equation 1 and Equation 4 from Equation 2. This gives us:

a = -28/15

b = 59/15

Substituting these values into Equation 1, we can solve for c:

c = -23

Finally, we can substitute all the values into the general form of the function to get:

[tex]f(x) = (-28/15)x^3 + (59/15)x^2 - 23x + d[/tex]

To find the value of d, we can use the fact that the function has a local maximum value of 4 at x = 1. Substituting x = 1 and y = 4 into the function, we get:

4 = (-28/15) + (59/15) - 23 + d

Solving for d, we get:

d = -149/3

To know more about cubic function refer here:

https://brainly.com/question/29337275

#SPJ11

Answer:

The concentration of dots at younger ages in Group A suggests a lower overall average age compared to Group B.

Step-by-step explanation:

Based on visual inspection, Group A most likely has a lower mean age of music students compared to Group B. This conclusion is supported by the fact that the majority of dots in Group A are clustered around the younger ages of 6, 8, 9, 11, and 13, while Group B has dots more spread out across a wider range of ages, including higher ages such as 19 and 21. The concentration of dots at younger ages in Group A suggests a lower overall average age compared to Group B.

For more questions on overall average age

https://brainly.com/question/30433207

#SPJ11

To evaluate the left and right Riemann sums for n = 10 over the interval [0,5], we need to use tabulated values of the function f. These Riemann sums are approximations of the definite integral of f over the given interval.

The Riemann sum is a method for approximating the definite integral of a function over an interval by dividing the interval into subintervals and evaluating the function at specific points within each subinterval. The left Riemann sum uses the left endpoint of each subinterval, while the right Riemann sum uses the right endpoint.

In this case, we are given that n = 10, which means we need to divide the interval [0,5] into 10 subintervals of equal width. The width of each subinterval can be found by taking the difference between the endpoints of the interval and dividing it by the number of subintervals (in this case, 10).

Once we have the width of each subinterval, we can determine the specific points within each subinterval where we will evaluate the function f. The left Riemann sum will use the left endpoint of each subinterval as the evaluation point, while the right Riemann sum will use the right endpoint.

By summing up the function values at these evaluation points and multiplying by the width of each subinterval, we can obtain the left and right Riemann sums for the given function f over the interval [0,5] with n = 10. These sums provide approximations of the definite integral of f over the interval and can be used to understand the behavior of the function within that range.

Learn more about integral here: https://brainly.com/question/31059545

#SPJ11

The species from the West Coast of the United States that may have been the ancestor of 28 distinct species on the Hawaiian Islands is known as the Silversword.

The Silversword is a Hawaiian plant that has undergone an incredible degree of adaptive radiation, resulting in 28 distinct species, each with its unique appearance and ecological niche.

The Silversword is a great example of adaptive radiation, a process in which an ancestral species evolves into an array of distinct species to fill distinct niches in new habitats.

The Silversword is native to Hawaii and belongs to the sunflower family.

These plants have adapted to Hawaii's high-elevation volcanic slopes over the past 5 million years. Silverswords can live for decades and grow up to 6 feet in height.

To know more about species visit:-

https://brainly.com/question/25939248

#SPJ11

a · b = 4.

To compute a · b, we need to multiply the corresponding components of a and b and then add the products together. So:

a · b = (1)(-2) + (0)(6) + (2)(3) = -2 + 0 + 6 = 4

Therefore, a · b = 4.

To Know more about products here

brainly.com/question/28642423#

#SPJ11

y-hat would be 29.3 when the intercept equals 12.34, the slope (b) equals 2.12, and x equals 8.

To find the value of y-hat when the intercept equals 12.34 and the slope (b) equals 2.12 for an x of 8, you can use the linear regression equation:

y-hat = intercept + (slope × x)

Step 1: Substitute the given values into the equation:
y-hat = 12.34 + (2.12 × 8)

Step 2: Multiply the slope by x:
y-hat = 12.34 + (16.96)

Step 3: Add the intercept and the product from Step 2:
y-hat = 29.3

So, y-hat would be 29.3 when the intercept equals 12.34, the slope (b) equals 2.12, and x equals 8.

learn more about "intercept ":- https://brainly.com/question/1884491

#SPJ11

Thus, the object travels a distance of 10π units along the given trajectory.

To find out how far an object travels along a given trajectory, we need to calculate the arc length of the curve. The formula for arc length is given by:

L = ∫_a^b √[dx/dt]^2 + [dy/dt]^2 dt

where L is the arc length, a and b are the start and end points of the curve, and dx/dt and dy/dt are the derivatives of x and y with respect to time t.

In this case, we have the trajectory r(t) = (10 cos 2t, 10 sin 2t) for 0 ≤ t ≤ π/2. Therefore, we can calculate the derivatives of x and y as follows:

dx/dt = -20 sin 2t
dy/dt = 20 cos 2t

Substituting these values into the formula for arc length, we get:

L = ∫_0^(π/2) √[(-20 sin 2t)^2 + (20 cos 2t)^2] dt
 = ∫_0^(π/2) √400 dt
 = ∫_0^(π/2) 20 dt
 = 20t |_0^(π/2)
 = 10π

Therefore, the object travels a distance of 10π units along the given trajectory.

Know more about the trajectory

https://brainly.com/question/88554

#SPJ11

The bipartisan campaign reform act of 2002 is more commonly called the McCain-Feingold Act.

The Bipartisan Campaign Reform Act (BCRA) of 2002, also known as the McCain-Feingold Act, is a piece of legislation enacted by the United States Congress on March 27, 2002, that amended the Federal Election Campaign Act of 1971 (FECA). The law was developed to restrict soft money, which is money raised by political parties that is not designated for a specific candidate and therefore avoids federal contribution restrictions. The Bipartisan Campaign Reform Act (BCRA), also known as the McCain-Feingold Act, was a US law that was enacted in 2002.

Know more about Bipartisan Campaign Reform  here:

https://brainly.com/question/31831723

#SPJ11

Answer: A.McCain-Feingold Act

Step-by-step explanation:

The statement "Decisions can never be made without the benefit of knowledge gained from sampling" is false.

Sampling refers to the process of selecting a subset of data from a larger population to make inferences about that population. While sampling can be useful in some decision-making contexts, it is not always necessary or appropriate.

In many decision-making situations, there may not be a well-defined population to sample from. For example, a business owner may need to decide whether to invest in a new product line based on market research and other available information, without necessarily having a representative sample of potential customers.

In other cases, the costs and logistics of sampling may make it impractical or impossible.

Additionally, some decision-making approaches, such as decision tree analysis, rely on modeling hypothetical scenarios and their potential outcomes without explicitly sampling from real-world data. While sampling can be a valuable tool in decision-making, it is not a requirement and decisions can still be made without it.

Learn more about Decision trees:

brainly.com/question/28906787

#SPJ11

To prove that the sequence {an} is bounded, we can utilize the fact that the limit of the sequence exists. Since the limit of {an} as n approaches infinity is L, we can conclude that there exists some positive integer N such that for all n greater than or equal to N, the terms of the sequence are arbitrarily close to L.

1. By considering the terms up to index N-1, we can find a maximum value M that is greater than or equal to all those terms. By choosing the larger of M and L, we can establish an upper bound for all terms of the sequence.

2. Let's assume that the limit of {an} as n approaches infinity is L. This means that for any given positive epsilon, there exists a positive integer N such that for all n greater than or equal to N, the absolute value of (an - L) is less than epsilon. In other words, the terms of the sequence {an} become arbitrarily close to L as n becomes larger.

3. Now, let's consider the terms of the sequence up to index N-1. Since there are only finitely many terms before index N, we can find the maximum value among those terms, denoted as M. We know that M is greater than or equal to all the terms before index N.

4. To establish an upper bound for the entire sequence {an}, we consider two cases: (1) M is greater than or equal to L, and (2) M is less than L. In case (1), we choose M as the upper bound for the entire sequence {an}. Since M is greater than or equal to all terms before index N, and for all n greater than or equal to N, the terms become arbitrarily close to L, M serves as an upper bound for the entire sequence.

5. In case (2), we choose L as the upper bound for the entire sequence {an}. Since L is the limit of the sequence, and for all n greater than or equal to N, the terms become arbitrarily close to L, L serves as an upper bound for the entire sequence.

6. Therefore, we have shown that in both cases, the sequence {an} is bounded, with an upper bound of either M or L, depending on the situation.

Learn more about sequence here: brainly.com/question/29394831

#SPJ11

"The given statement is false."Any function that satisfies the condition of periodicity can have a transition from period 2 straight pi to an arbitrary period p equals 2 l. It does not have to be a trigonometric function.

"False". The transition from period 2 straight pi to an arbitrary period p equals 2 l can be achieved by any function that satisfies the condition f(x + p) = f(x) for all x. Such a function is said to be periodic with period p.

Trigonometric functions such as sine and cosine are examples of periodic functions with period 2π, but there are many other functions that can be periodic with different periods.

For instance, the function f(x) = x^2 is a periodic function with period 2, since f(x + 2) = (x + 2)^2 = x^2 + 4x + 4 = x^2 + 4(x + 1) = f(x) + 4. This means that the function repeats every 2 units. Similarly, the function f(x) = sin(πx) is a periodic function with period 2, since f(x + 2) = sin(π(x + 2)) = sin(πx + 2π) = sin(πx) = f(x).

For such more questions on Periodicity:

https://brainly.com/question/27389507

#SPJ11

True. The transition from period 2 straight pi to an arbitrary period p equals 2 l is only possible if f is a trigonometric function.

True, the transition from a period of 2π to an arbitrary period P = 2L is only possible if f is a trigonometric function.
1. Trigonometric functions, such as sine and cosine, have a standard period of 2π.
2. In order to transition from the standard period to an arbitrary period P, we need to adjust the function by a factor.
3. The arbitrary period P can be represented as P = 2L, where L is a constant value.
4. For a trigonometric function f(x) with the standard period 2π, we can create a new function g(x) with period P by using the following transformation: g(x) = f(kx), where k = (2π)/P.
5. As a result, the new function g(x) will have the desired arbitrary period P = 2L.

This is because trigonometric functions are periodic and can have arbitrary periods, whereas non-trigonometric functions may not exhibit periodicity at all or may have a specific period that cannot be easily modified.
Thus, the statement is true.

Learn more about trigonometric:

brainly.com/question/14746686

#SPJ11

To find the volume of the solid cylinder W, we can use an iterated integral. Since W is centered about the z-axis and its base is at z=−1, we can express the volume of W as a triple integral in cylindrical coordinates.

First, we need to express the bounds of the integral. The radius of the base of W is 3, so the bounds for r will be from 0 to 3. The height of W is 5, so the bounds for z will be from -1 to 4. Finally, for θ, we want to integrate over the entire cylinder, so the bounds will be from 0 to 2π.

Therefore, the triple integral for the volume of W is:

∭W dV = ∫₀³ ∫₀²π ∫₋¹⁴ f(r cos θ, r sin θ, z) r dz dθ dr

Plugging in the function f(x,y,z)=x²+y²+z², we get:

∭W dV = ∫₀³ ∫₀²π ∫₋¹⁴ (r cos θ)² + (r sin θ)² + z² r dz dθ dr

Simplifying this expression, we get:

∭W dV = ∫₀³ ∫₀²π ∫₋¹⁴ r³ + z² r dz dθ dr

Evaluating this iterated integral will give us the volume of the solid cylinder W.

You can learn more about integral at: brainly.com/question/22008756

#SPJ11

Answer:10

Step-by-step explanation:

so lets say 4 is 100 then you are decreasing it by 1/4 so it is 3/4 with is 10 :)

Pls rate brainiest

Using cos 2A formula, cos α = ±√(1 + cos 2α)/2 can be derived.

Starting with the double angle formula for cosine, which is:

[tex]cos 2A = cos^2A - sin^2A[/tex]

We can rewrite this equation as:

[tex]cos^2A = cos 2A + sin^2A[/tex]

Adding 1/2 to both sides, we get:

[tex]cos^2A + 1/2 = (cos 2A + sin^2A) + 1/2[/tex]

Using the identity [tex]sin^2A + cos^2A[/tex] = 1, we can simplify the right-hand side to:

[tex]cos^2A + 1/2[/tex]= cos 2A+1/2

Now, we can take the square root of both sides to get:

[tex]cos A = ±√[(cos^2A + 1/2)] = ±√[(1 + cos 2A)/2][/tex]

This shows that cos α can be expressed in terms of cos 2α using the double angle formula for cosine. Specifically, cos α is equal to the square root of one plus cos 2α, divided by two, with a positive or negative sign depending on the quadrant in which α lies.

To learn more about cos 2A, refer:

https://brainly.com/question/28533481

#SPJ1

Potassium chloride (KCl) is a binary ionic compound consisting of potassium cations (K+) and chloride anions (Cl-).  a) KCl(s) → K+(aq) + Cl-(aq). b) CaBr2(s) → Ca2+(aq) + 2Br-(aq). c) Fe2(SO4)3(s) → 2Fe3+(aq) + 3SO42-(aq).

a) KCl(s) → K+(aq) + Cl-(aq)

Potassium chloride (KCl) is a binary ionic compound consisting of potassium cations (K+) and chloride anions (Cl-). When KCl is dissolved in water, it dissociates into its constituent ions, i.e., K+ and Cl-. This process is represented by the above chemical equation.

b) CaBr2(s) → Ca2+(aq) + 2Br-(aq)

Calcium bromide (CaBr2) is also a binary ionic compound consisting of calcium cations (Ca2+) and bromide anions (Br-). When CaBr2 is dissolved in water, it dissociates into its constituent ions, i.e., Ca2+ and 2Br-. This process is represented by the above chemical equation.

c) Fe2(SO4)3(s) → 2Fe3+(aq) + 3SO42-(aq)

Iron(III) sulfate (Fe2(SO4)3) is a complex ionic compound consisting of two iron cations (Fe3+) and three sulfate anions (SO42-). When Fe2(SO4)3 is dissolved in water, it dissociates into its constituent ions, i.e., 2Fe3+ and 3SO42-. This process is represented by the above chemical equation.

Learn more about Potassium chloride here

https://brainly.com/question/25380525

#SPJ11

The limit of the expression x⁻ⁿ p(x) [tex]e^{-1/x^2}[/tex] as x approaches zero is zero.

Let p(x) be any polynomial in x, and n be a positive integer. We want to find the limit of the expression x⁻ⁿ p(x)  [tex]e^{-1/x^2}[/tex]  as x approaches zero. This expression involves a polynomial, an exponential function, and a power function.

To begin, let's consider the case where p(x) is the constant function 1. In this case, the expression simplifies to x⁻ⁿ  [tex]e^{-1/x^2}[/tex] . To evaluate the limit of this expression as x approaches zero, we can use L'Hopital's rule. Specifically, we can take the derivative of the numerator and denominator with respect to x. This gives us:

lim x→0 x⁻ⁿ  [tex]e^{-1/x^2}[/tex]  = lim x→0 (-n)x^(-n-1)  [tex]e^{-1/x^2}[/tex]  / (-2x⁻³  [tex]e^{-1/x^2}[/tex] )

We can simplify this expression by canceling out the common factor of e^(-1/x²) in both the numerator and denominator. This gives us:

lim x→0 x⁻ⁿ  [tex]e^{-1/x^2}[/tex]  = lim x→0 (-n/2)xⁿ⁻²

Since n is a positive integer, the exponent n-2 is also a positive integer. Therefore, as x approaches zero, the term xⁿ⁻² approaches zero faster than any power of x⁻¹, and the overall limit of the expression is zero.

Specifically, we have:

lim x→0 x⁻ⁿ p(x)  [tex]e^{-1/x^2}[/tex] = lim y→∞ yⁿ p(1/y) [tex]e^{-y^2}[/tex]

By setting z = 1/y, we can rewrite the expression as:

lim z→0+ zⁿ p(z)  [tex]e^{-1/x^2}[/tex]

Now we have reduced the problem to the special case we have already solved. Therefore, as z approaches zero, the limit of the expression is also zero.

To know more about polynomial here

https://brainly.com/question/11536910

#SPJ4

We can use the Comparison Test to determine the convergence of the given series:

Since 0 ≤ cos^2(n) ≤ 1 for all n, we have:

0 ≤ cos^2(n) / (n^5 + 1) ≤ 1 / (n^5)

The series ∑(n=1 to ∞) 1 / (n^5) is a convergent p-series with p = 5, so by the Comparison Test, the given series is also convergent.

Therefore, the series ∑(n=1 to ∞) cos^2(n) / (n^5 + 1) is convergent.

To know more about comparison test , refer here :

https://brainly.com/question/30761693#
#SPJ11

The decision rule for testing the hypotheses at a 5% level of significance is as follows:

A. Reject H0 if p > 0.025.

Do not reject H0 if p ≤ 0.025.

In hypothesis testing, the p-value is compared to the significance level (α) to make a decision. If the p-value is less than or equal to the significance level, we do not reject the null hypothesis (H0). If the p-value is greater than the significance level, we reject the null hypothesis.

In this case, the null hypothesis (H0) is that the slope coefficient (β1) is equal to 0, while the alternative hypothesis (Ha) is that β1 is not equal to 0. To make a decision, we compare the p-value associated with the coefficient estimate (b1) to the significance level (α = 0.05).

Since the p-value is not given in the provided information, we cannot determine the decision based on the given options.

learn more about "hypothesis ":- https://brainly.com/question/25263462

#SPJ11

the new volume of the gas, when the pressure is raised to 14 atm and the temperature is increased to 300 K, is approximately 29.5714 liters.

The new volume of the gas, we can use the combined gas law, which states:

(P1 × V1) / T1 = (P2 × V2) / T2

Where:

P1 = Initial pressure

V1 = Initial volume

T1 = Initial temperature

P2 = Final pressure

V2 = Final volume (what we're trying to find)

T2 = Final temperature

Given:

P1 = 12 atm

V1 = 23 liters

T1 = 200 K

P2 = 14 atm

T2 = 300 K

Plugging these values into the combined gas law equation, we get:

(12 atm × 23 liters) / 200 K = (14 atm × V2) / 300 K

To find V2, we can rearrange the equation:

(12 atm × 23 liters × 300 K) / (200 K × 14 atm) = V2

Simplifying the equation, we have:

V2 = (12 × 23 × 300) / (200 × 14)

V2 = 82800 / 2800

V2 = 29.5714 liters (rounded to four decimal places)

The new volume of the gas, when the pressure is raised to 14 atm and the temperature is increased to 300 K, is approximately 29.5714 liters.

For similar questions on volume

https://brainly.com/question/463363

#SPJ11

c = pi/2, and the value of c > 1 such that the average value of f(x) on the interval [2, 20] is equal to c is c = pi/2.

The average value of a function f(x) on the interval [a, b] is given by:

Avg = 1/(b-a) * ∫[a, b] f(x) dx

We want to find a value of c > 1 such that the average value of the function [tex]f(x) = (9pi/x^2)cos(pi/x)[/tex] on the interval [2, 20] is equal to c.

First, we find the integral of f(x) on the interval [2, 20]:

[tex]∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

We can use u-substitution with u = pi/x, which gives us:

-9pi * ∫[pi/20, pi/2] cos(u) du

Evaluating this integral gives us:

[tex]-9pi * sin(u) |_pi/20^pi/2 = 9pi[/tex]

Therefore, the average value of f(x) on the interval [2, 20] is:

[tex]Avg = 1/(20-2) * ∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

= 1/18 * 9pi

= pi/2

Now we set c = pi/2 and solve for x:

Avg = c

[tex]pi/2 = 1/(20-2) * ∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

pi/2 = 1/18 * 9pi

pi/2 = pi/2

Therefore, c = pi/2, and the value of c > 1 such that the average value of f(x) on the interval [2, 20] is equal to c is c = pi/2.

To know more about function refer to-

https://brainly.com/question/12431044

#SPJ11

Answer:

B

Step-by-step explanation:

Adding 8 to both sides will allow you to set the quadratic equal to 0. From there factoring becomes easier.

2) a. The average daily balance for the billing period, which ends on June 11. May has 31 days is $547.56.

b. $0.71 is the finance charge calculated on June 11. The monthly periodic rate is 1.3%.

c.  $548.27 is the Smith's new credit card balance on June 12.

3) $83.50 money was saved by making the payment earlier in the billing cycle.

a. It does matter when you make your payment because the finance charge is based on the balance at the end of the billing period.

b.  It also matters when you make your purchases because the daily balance is calculated based on the charges and payments up to and including each day.

2)

a. To find the average daily balance, we need to first calculate the balance for each day of the billing period. The balance for each day is the sum of charges and payments up to and including that day. We can calculate the balances as follows:

May 12: $378.50

May 13: $378.50 + $129.79 = $508.29

May 14-31: $508.29

June 1: $508.29 + $135.85 = $644.14

June 2-7: $644.14

June 8: $644.14 + $37.63 = $681.77

June 9: $681.77 - $50.00 = $631.77

June 10-11: $631.77

Next, we add up the daily balances and divide by the number of days in the billing period:

Average daily balance = (31 x $508.29 + 6 x $644.14 + 2 x $681.77) / 39

                                      = $21,328.99 / 39

                                      = $547.56

b. To calculate the finance charge, we first need to calculate the daily periodic rate, which is the monthly periodic rate divided by the number of days in a month:

Daily periodic rate = 1.3% / 30

                              = 0.04333%

Next, we multiply the average daily balance by the daily periodic rate and by the number of days in the billing period:

Finance charge = $547.56 x 0.0004333 x 30

                          = $0.71

c. The Smith's new credit card balance on June 12 is the sum of the average daily balance and the finance charge:

New balance = $547.56 + $0.71

                       = $548.27

3) The payment was made on June 9, which is 3 days before the end of the billing period. If the payment had been made on June 11, the balance would have been $631.77 instead of $548.27. This means that the payment saved the Smiths $83.50 in finance charges.

a) It does matter when you make your payment because the finance charge is based on the balance at the end of the billing period. If you make a payment earlier in the billing cycle, your balance will be lower at the end of the period and you will pay less in finance charges.

b) It also matters when you make your purchases because the daily balance is calculated based on the charges and payments up to and including each day. If you make a large purchase early in the billing cycle, your average daily balance will be higher and you will pay more in finance charges.

Learn more about Billing cycle at

brainly.com/question/29348756

#SPJ1

Modifying Above p with caret minus Upper E less than p less than ModifyingAbove p with caret plus Upper E

where p is the point estimate, and Upper E is the margin of error.


To express the confidence interval (0.008, 0.096) in the form of ModifyingAbove p with caret minus Upper E less than p less than ModifyingAbove p with caret plus Upper E, we first need to find the point estimate (p) and the margin of error (Upper E).

The point estimate is the midpoint of the interval, which is:

p = (0.008 + 0.096) / 2 = 0.052

The margin of error is half the width of the interval, which is:

Upper E = (0.096 - 0.008) / 2 = 0.044

Therefore, the confidence interval can be expressed as:

ModifyingAbove 0.052 with caret minus 0.044 less than p less than ModifyingAbove 0.052 with caret plus 0.044

This means that we are 95% confident that the true population proportion (p) falls within the range of 0.008 to 0.096.

the confidence interval (0.008, 0.096) can be expressed in the form of Modifying Above p with caret minus Upper E less than p less than Modifying Above p with caret plus Upper E as Modifying Above 0.052 with caret minus 0.044 less than p less than Modifying Above 0.052 with caret plus 0.044. This means that we are 95% confident that the true population proportion falls within this range.

To learn more about interval visit:

https://brainly.com/question/30486507

#SPJ11

Given, Lincoln invested $2,800 in an account paying an interest rate of 5 3/8 % compounded continuously. Lily invested $2,800 in an account paying an interest rate of 5 7/8 % compounded quarterly.

After 15 years, we need to calculate how much more money would Lily have in her account than Lincoln, to the nearest dollar. Calculation of Lincoln's investment Continuous compounding formula is A = Pe^rt Where, A is the amount after time t, P is the principal amount, r is the annual interest rate, and e is the base of the natural logarithm.

Lincoln invested $2,800 in an account paying an interest rate of 5 3/8 % compounded continuously .i.e. r = 5.375% = 0.05375 and P = $2,800Thus, A = Pe^rtA = $2,800 e^(0.05375 × 15)A = $2,800 e^0.80625A = $2,800 × 2.24088A = $6,292.44Step 2: Calculation of Lily's investmentThe formula to calculate the amount in an account with quarterly compounding is A = P (1 + r/n)^(nt)Where, A is the amount after time t, P is the principal amount, r is the annual interest rate, n is the number of times the interest is compounded per year, and t is the time. Lily invested $2,800 in an account paying an interest rate of 5 7/8 % compounded quarterly.i.e. r = 5.875% = 0.05875, n = 4, P = $2,800Thus, A = P (1 + r/n)^(nt)A = $2,800 (1 + 0.05875/4)^(4 × 15)A = $2,800 (1.0146875)^60A = $2,800 × 1.96494A = $7,425.16Step 3: Calculation of the difference in the amount After 15 years, Lily has $7,425.16 and Lincoln has $6,292.44Thus, the difference in the amount would be $7,425.16 - $6,292.44 = $1,132.72Therefore, the amount of money that Lily would have in her account than Lincoln, to the nearest dollar, is $1,133.

Know more about investment Continuous compounding  here:

https://brainly.com/question/31444739

#SPJ11

The object with the features described is (a) Object A

from the question, we have the following parameters that can be used in our computation:

Using the above as a guide, we have the following:

We examing the options

So, we have

Object (a)

Hence, the object is object (a)

Read more about parallelogram at

https://brainly.com/question/970600

#SPJ1

The population mean, denoted by u, is 83, and the standard deviation of the population, denoted by sigma, is 14. The sample size, denoted by n, is 49.
Hi! I'd be happy to help you with your question. Based on the given parameters of the population and sample size, we need to determine µ (mean) and σ (standard deviation).

From the information provided, we have the following parameters:

1. Population mean (µ) = 83
2. Population standard deviation (σ) = 14
3. Sample size (n) = 49

Using these parameters, we can determine the mean and standard deviation for the sample. Since the population mean is given, the sample mean will also be 83.

To find the standard error (SE), which is the standard deviation for the sample, use the formula:

SE = σ / √n

Plugging in the values, we get:

SE = 14 / √49
SE = 14 / 7
SE = 2

So, the sample mean (µ) is 83, and the sample standard deviation (SE) is 2.

To know more about mean visit:

https://brainly.com/question/1136789

#SPJ11