According to the theory of constraints, a CCR (Constraint, Control, and Regulatory) can be an employee. Option C is the correct answer.
In the theory of constraints, a CCR refers to any element within a system that limits the system's performance or throughput. It can be a person, process, or resource that restricts the overall efficiency of the system. While various factors listed in the question, such as factory layout, product design, and sales literature, can contribute to system constraints, an employee can also be a significant constraint.
Factors like employee skills, capacity, or availability can impact the overall performance of a system. Therefore, an employee can be considered a CCR.
Option C is the correct answer.
You can learn more about theory of constraints at
https://brainly.com/question/15562036
#SPJ11
Consider the following information:State ofEconomy Probability of Stateof Economy Rate of Returnif State OccursRecession .23 –.11Normal .47 .13Boom .30 .32Required:Calculate the expected return.
The expected return is 13.18%, indicating that investors can anticipate a positive return on their investment.
The expected return is a measure of the anticipated profit or loss an investor can expect from an investment. In this case, we are given information about the state of the economy, the probability of each state, and the rate of return associated with each state.
To calculate the expected return, we need to multiply the probability of each state by its corresponding rate of return, and then add up the products.
Using the information provided, the expected return can be calculated as follows:
Expected return = (Probability of recession x Rate of return in recession) + (Probability of normal economy x Rate of return in normal economy) + (Probability of boom x Rate of return in boom)
Expected return = (0.23 x (-0.11)) + (0.47 x 0.13) + (0.30 x 0.32)
Expected return = -0.0253 + 0.0611 + 0.096
Expected return = 0.1318 or approximately 13.18%
Therefore, the expected return is 13.18%, indicating that investors can anticipate a positive return on their investment.
To know more about investment refer to-
https://brainly.com/question/15105766
#SPJ11
reliance on social security as the primary source of income increases with ____
Reliance on social security as the primary source of income increases with factors such as retirement, disability, or limited access to other sources of income.
The reliance on social security as the primary source of income tends to increase in specific circumstances. One significant factor is retirement, where individuals who have reached the eligible age for social security benefits may depend on these payments as their main source of income during their retirement years. Social security benefits are designed to provide financial support to retired individuals and supplement their savings or other retirement plans. Additionally, individuals with disabilities may rely heavily on social security as their primary source of income.
Moreover, individuals with limited access to other forms of income, such as low-wage workers or individuals with minimal savings or investments, may rely more on social security benefits to meet their daily expenses. Social security serves as a safety net for those who have limited financial resources, providing a foundation of income to support their basic needs.
Learn more about social security from here:
https://brainly.com/question/32221263
#SPJ11
members of labor unions are able to use their ________ to achieve better economic outcomes. excess supply of labor excess supply of labor bargaining power bargaining power secret ballot votes
Members of labor unions are able to use their bargaining power to achieve better economic outcomes. Bargaining power refers to the ability of a group to negotiate favorable terms and conditions with their employers, which can lead to increased wages, improved working conditions, and enhanced job security. By banding together in a union, workers are able to pool their collective strength and resources, making it more difficult for employers to ignore their demands or exploit their labor.
One key tool that unions employ in their negotiations is secret ballot votes. This democratic process allows union members to voice their opinions and make decisions collectively, while ensuring that each individual's vote remains confidential. Secret ballot votes can be used to decide on important matters such as whether to strike, accept a proposed contract, or endorse a specific policy change. Through this collaborative decision-making process, unions are able to harness the full power of their membership and secure better economic outcomes for all workers involved. In essence, the collective strength and unified voice provided by labor unions give workers the leverage necessary to negotiate more effectively with employers, resulting in improved economic conditions and overall well-being for the members.
To know more about Members of labor unions click this link -
brainly.com/question/28234924
#SPJ11
Scenario 9.2 The Burdell Company is a small manufacturing company that uses gear assemblies to produce four different models of mountain bikes. One of these gear assemblies, the "Smooth Shifter", is used for the two most expensive of Burdell's four models, and has an estimated annual demand of 300 units. Burdell estimates the cost to place an order is $40, and the holding cost for each assembly is $60 per year. The company operates 250 days per year.
78) Use the information in Scenario 9.2. What is the economic order quantity for the Smooth Shifter?
A) less than or equal to 40 units
B) greater than 40 units but less than or equal to 80 units
C) greater than 80 units but less than or equal to 120 units
D) greater than 120 units
79) Use the information in Scenario 9.2. What are the annual inventory holding costs if Burdell orders using the EOQ quantity?
A) less than or equal to $300
B) greater than $300 but less than or equal to $500
C) greater than $500 but less than or equal to $700
D) greater than $700
80) Use the information in Scenario 9.2. What are the annual ordering costs if Burdell orders using the EOQ quantity?
A) less than or equal to $200
B) greater than $200 but less than or equal to $350
C) greater than $350 but less than or equal to $500
D) greater than $500
81) Use the information in Scenario 9.2. What are the total annual holding and ordering costs if Burdell orders using the EOQ quantity?
A) greater than $1,500
B) greater than $1,000 but less than or equal to $1,500
C) greater than $750 but less than or equal to $1,000
D) less than or equal to $750
82) Use the information in Scenario 9.2. What is the cycle length (time between orders) when orders are placed using the EOQ quantity?
A) less than or equal to 5 days
B) greater than 5 days but less than or equal to 10 days
C) greater than 10 days but less than or equal to 15 days
D) greater than 15 days
83) Use the information in Scenario 9.2. How many times per year must Burdell order the Smooth Shifter when orders are placed using the EOQ quantity?
A) less than or equal to 10 times per year
B) more than 10 times but fewer than or equal to 20 times per year
C) more than 20 times but fewer than or equal to 30 times per year
D) more than 30 times
84) Use the information in Scenario 9.2. The purchasing manager decides that, in order to save purchasing time, orders for the Smooth Shifter will be placed once a month, or twelve times per year. How much does this approach cost Burdell in additional annual holding and ordering costs (instead of Burdell ordering using the EOQ quantity)?
A) more than $500
B) more than $200 but less than or equal to $500
C) more than $50 but less than or equal to $200
D) less than or equal to $50
The EOQ is 80 units, and the total annual cost is $2,550. The cycle length is 117.2 days, and the number of orders per year is 4. Burdell can save money by using the EOQ quantity instead of ordering once a month.
Economic order quantityThe economic order quantity (EOQ) formula is given by:
[tex]EOQ = \sqrt{((2DS)/H)[/tex]
where:
D is the annual demand for the productS is the setup (or ordering) cost per orderH is the annual holding cost per unitUsing the information given in Scenario 9.2:
D = 300S = $40H = $60Burdell operates for 250 days per year
Plugging in these values into the formula, we get:
EOQ = [tex]\sqrt{((2 x 300 x 40)/60)}[/tex] = 80 units (rounded to the nearest integer)
Therefore, the answer to question 78 is B) greater than 40 units but less than or equal to 80 units.
The annual inventory holding costs can be calculated as follows:
Annual holding cost = (EOQ/2) x H
Plugging in the values, we get:
Annual holding cost = (80/2) x $60 = $2,400
Therefore, the answer to question 79 is D) greater than $700.
The annual ordering costs can be calculated as follows:
Annual ordering cost = (D/EOQ) x S
Plugging in the values, we get:
Annual ordering cost = (300/80) x $40 = $150
Therefore, the answer to question 80 is B) greater than $200 but less than or equal to $350.
The total annual holding and ordering costs can be calculated by adding the annual holding cost and the annual ordering cost:
Total annual cost = Annual holding cost + Annual ordering cost = $2,400 + $150 = $2,550
Therefore, the answer to question 81 is B) greater than $1,000 but less than or equal to $1,500.
The cycle length (time between orders) can be calculated as follows:
Cycle length = EOQ/Days of operation per year
Plugging in the values, we get:
Cycle length = 80/250 = 0.32 years
Converting this to days, we get:
Cycle length = 0.32 x 365 = 117.2 days (rounded to the nearest integer)
Therefore, the answer to question 82 is C) greater than 10 days but less than or equal to 15 days.
The number of times per year that Burdell must order the Smooth Shifter can be calculated as follows:
Number of orders per year = D/EOQ
Plugging in the values, we get:
Number of orders per year = 300/80 = 3.75
Since we cannot order fractional times, we round up to 4 orders per year.
Therefore, the answer to question 83 is A) less than or equal to 10 times per year.
If Burdell orders once a month, or 12 times per year, instead of using the EOQ quantity, the additional annual holding and ordering costs can be calculated as follows:
Additional annual cost = [(D x S)/12] + [(EOQ/2) x H] - [(D/EOQ) x S]
Plugging in the values, we get:
Additional annual cost = [(300 x $40)/12] + [(80/2) x $60] - [(300/80) x $40] = $266.67
Therefore, the answer to question 84 is C) more than $50 but less than or equal to $200.
Learn more about economic order quantity: brainly.com/question/26814787
#SPJ11
would you be inclined to look at boa logistics more closely if your company had an important logistics need?
Yes, maybe you would be inclined to look at BOA Logistics more closely. If your company has an important logistics need.
It would be prudent to consider exploring and evaluating various logistics service providers, including BOA Logistics, to determine the best fit for your requirements.
Conducting a closer examination of BOA Logistics or potential providers can help assess their capabilities, expertise, track record, and ability to meet your specific logistics needs.
That's why, it's important to conduct the compare options and make an informed decision based on your company's unique requirements and the provider's suitability in terms of services, reliability, cost-effectiveness, and customer reviews or references.
To know more about BOA logistics here,
https://brainly.com/question/30009541
#SPJ4
in order for usmca to supersede nafta, it must be blank______.
In order for USMCA to supersede NAFTA, it must be ratified by the legislative bodies of the United States, Mexico, and Canada.
To supersede NAFTA, the United States-Mexico-Canada Agreement (USMCA) needs to go through a formal process of ratification by the legislative bodies of the three countries involved: the United States, Mexico, and Canada. Ratification typically requires approval from the respective national parliaments or congresses. In the United States, for example, the USMCA was signed into law by President Donald Trump in January 2020, but it had to be approved by both houses of Congress before it could fully replace NAFTA.
The ratification process ensures that the agreement is legally binding and establishes the necessary framework for its implementation and enforcement. It also allows for a thorough examination of the agreement's provisions and potential impacts on various sectors and stakeholders within each country. Ratification is a crucial step to ensure that the USMCA becomes the governing trade agreement between the three countries, superseding NAFTA.
The USMCA, which entered into force on July 1, 2020, modernizes and updates several aspects of NAFTA, including provisions related to labor, intellectual property, agriculture, digital trade, and automotive manufacturing. Its successful ratification and implementation demonstrate a commitment to strengthening trade relations and fostering economic integration among the United States, Mexico, and Canada.
Learn more about NAFTA here: brainly.com/question/12027606
#SPJ11
A fast food restaurant gives a free scratch off ticket to each lunch customer that has the following possible winnings: Amount, x $0 $1.00 $50.00 Probability, P(x) 0.50 0.03 The probability of winning nothing ($0) in this game is . The expected value of this probability distribution is . (Round to 2 decimal places)
The probability of winning nothing ($0) in this game is **0.50**.
To calculate the expected value of this probability distribution, we multiply each possible winning amount by its corresponding probability and sum them up.
The expected value is calculated as follows:
(0 * 0.50) + (1.00 * 0.03) + (50.00 * 0) = 0.00 + 0.03 + 0.00 = 0.03
Therefore, the expected value of this probability distribution is **$0.03**.
Learn more about expected value in probability distributions here:
https://brainly.com/question/29068283?referrer=searchResults
#SPJ11
adherence to good practice and predictive hazard evaluation are two methods of hazard evaluation. which of the following is not included in adherence to good practice?
Adherence to good practice in hazard evaluation focuses on following established industry standards, guidelines, and protocols to identify and mitigate potential hazards.
It encompasses various aspects of safety management and risk assessment. However, without the specific options provided, it is difficult to determine which option is not included in adherence to good practice. Nevertheless, I will provide an overview of common elements typically encompassed by adherence to good practice in hazard evaluation.
Adherence to good practice often includes:
1. Compliance with regulatory requirements: Following legal obligations and standards set by relevant authorities to ensure safety and mitigate risks.
2. Implementation of safety protocols: Establishing and enforcing procedures, policies, and guidelines that promote safe practices and prevent hazards.
3. Training and education: Providing employees with the necessary knowledge and skills to identify and manage hazards effectively.
4. Regular safety inspections and audits: Conducting routine assessments of the workplace to identify potential hazards and ensure compliance with safety measures.
5. Incident reporting and investigation: Encouraging a culture of reporting incidents and near-misses to identify underlying hazards and implement corrective actions.
6. Continuous improvement: Striving for ongoing evaluation and enhancement of safety practices based on lessons learned, feedback, and emerging industry standards.
Overall, adherence to good practice in hazard evaluation aims to create a safe working environment by implementing standardized approaches and maintaining a proactive attitude towards identifying and mitigating potential risks.
Visit here to learn more about hazard evaluation:
brainly.com/question/30083267
#SPJ11
an experiment, which compares the means of one categorical predictor, which is measured using the same entities in all conditions.
A one-way ANOVA can be conducted to compare the means of a categorical predictor, using the same entities across all conditions.
How can the means of a categorical predictor, measured using the same entities in all conditions, be compared?To compare the means of a categorical predictor measured with the same entities in all conditions, a one-way ANOVA (Analysis of Variance) can be utilized. This statistical test examines whether there are significant differences in the means of multiple groups or conditions.
The categorical predictor serves as the independent variable, while the dependent variable is a continuous measurement taken from the same entities in each condition. By conducting the one-way ANOVA, researchers can determine if there are statistically significant variations among the means of the different categories. This analysis provides valuable insights into the impact of the categorical predictor on the dependent variable.
Learn more about: categorical
brainly.com/question/18370940
#SPJ11
what is one way the u.s. government engaged in a keynesian intervention following the 2008 financial collapse?
One way the U.S. government engaged in a Keynesian intervention following the 2008 financial collapse was through the implementation of fiscal policy measures.
In addition to fiscal policy measures, the U.S. government also implemented monetary policy measures, such as lowering interest rates, to encourage borrowing and spending. The Federal Reserve lowered interest rates in an effort to make it cheaper for businesses and consumers to borrow money, which can help to stimulate economic growth. The lower interest rates also made it cheaper for the government to borrow money to finance its fiscal policy measures.
The government increased government spending and lowered taxes in an effort to stimulate economic growth and create jobs. Overall, the U.S. government's Keynesian interventions following the 2008 financial collapse aimed to stimulate economic growth and address the resulting economic downturn through a combination of fiscal and monetary policy measures.
Learn more about financial Visit: brainly.com/question/30023427
#SPJ4
Suppose Thailand is a large country. Thailand’s demand and supply curves for rice are: D* = 9,800 – 200P S* = -200 + 200P
c. Suppose the Thai government offers the country’s producers an export subsidy of $13.00 per bushel of rice. In doing so, the world price is lowered to $27.
i. Calculate the price paid & quantity demanded by Thai consumers.
ii. Calculate the net effect of the export subsidy on Thailand’s welfare.
free trade price is $32 per bushel
Thailand's welfare increases by the sum of the changes in producer and consumer surplus, minus the government spending. Therefore, the net effect of the export subsidy on Thailand's welfare is:
$52,800 + $108,900 - $85,800 = $76,900 thousand.
To start, we need to calculate the equilibrium price and quantity without the subsidy, which is where the demand and supply curves intersect:
9,800 - 200P = -200 + 200P
Solving for P, we get P = $32 per bushel.
Substituting this price back into either equation gives us the equilibrium quantity:
Q* = 9,800 - 200($32) = 3,400 thousand bushels.
i. With the export subsidy of $13 per bushel, the effective price for Thai producers increases to $40 ($27 + $13), which will increase the quantity of rice supplied to the market.
The new supply curve with the subsidy is: S* = -200 + 200($40) = 6,600 thousand bushels.
At this new supply curve, the quantity demanded by Thai consumers can be found by setting the demand equal to the new supply:
9,800 - 200P = 6,600
Solving for P, we get P = $11 per bushel.
So, with the export subsidy, Thai consumers pay $11 per bushel and consume Qd = 6,600 thousand bushels.
ii. The net effect of the export subsidy on Thailand's welfare can be broken down into several components:
Producer surplus: With the export subsidy, Thai producers receive a higher price of $40 per bushel, compared to the free trade price of $32 per bushel. Therefore, producer surplus increases by (40 - 32) x 6,600 = $52,800 thousand.
Consumer surplus: The effective price for Thai consumers is $11 per bushel, which is lower than the free trade price of $32 per bushel. Therefore, consumer surplus increases by (32 - 11) x 6,600 / 2 = $108,900 thousand.
Government spending: The Thai government spends $13 per bushel on the export subsidy, which totals $85,800 thousand (13 x 6,600).
Overall, Thailand's welfare increases by the sum of the changes in producer and consumer surplus, minus the government spending. Therefore, the net effect of the export subsidy on Thailand's welfare is:
$52,800 + $108,900 - $85,800 = $76,900 thousand.
For more such questions on Thailand's welfare
https://brainly.com/question/1219591
#SPJ11
A firm earns higher profits than its rivals when it creates more of which of the following for its customers?
A. Risk
B.Options
C.Investments
D.Products
E.Value
(Mango Electronics Inc.) Mango Electronics Inc. is a Fortune 500 company that develops and markets innovative consumer electronics products. The development process proceeds as follows. Mango researches new technologies to address unmet market needs. Patents are filed for products that have the requisite market potential. Patents are granted for a period of 20 years starting from the date of issue. After receiving a patent, the patented technolo- gies are then developed into marketable products at five independent development centers. Each product is only developed at one center. Each center has all the requisite skills to bring any of the products to market (a center works on one product at a time). On average, Mango files a patent every 7 months (with standard deviation of 7 months). The average development process lasts 28 months (with standard deviation of 56 months). a. What is the utilization of Mango's development facilities? [9.6] b. How long does it take an average technology to go from filing a patent to being launched in the market as a commercial product? [9.6] c. How many years of patent life are left for an average product launched by Mango Elec- tronics?
1. The utilization of Mango's development facilities is 0.54%
2. The total time is 32.66 months.
3. Number of years patent life are left for a product is 7.3 years
How to calculate the value(a) Utilization is given by:
u = p / (a x m)
Given that;
a = 7 month
p = 30 months
m = 8
Therefore, u = 30 / (7 x 8)
u = 0.5357 = 0.54 (rounded)
(b) How long does it take an average technology to go from filing a patent to being launched in the market as a commercial product?
Given that:
CVa = 7 / 7 = 1
CVp = 60 / 30 = 2
Waiting time is given by;
Tq = (p / m) x (u√2(m+1) -1 / 1 - u) x ( (CVa2 + CVp2 ) / 2 )
Tq = (30/8) x (0.5357√2(8+1) -1 / 1-0.5357) x ((1 + 4) / 2)
Tq = (3.75) x ( 0.5357√(4.24) -1 / 1 – 0.5357 ) x 2.5
Tq = 3.75 x ( 0.53573.243 / 0.4643 ) x 2.5
Tq = 3.75 x 0.285 x 2.5
Tq = 2.667 months
Now,
p = 30 months
T = Tq + p = 2.667 + 30 = 32.667 months = 2.7 years
(c) How many years of patent life are left for an average product launched by Mango Electronics?
The patent life is given for 10 years.
If the entire development process takes 32.667 months = 2.7 years, then there will be
= 10 - 2.7 = 7.3
Learn more about utilization on
https://brainly.com/question/14806473
#SPJ1
Crane Deliveries acquired a truck at a cost of $66,560 on January 1, 2014. The truck is expected to have a salvage value of $8,320 at the end of its 4-year useful life. Crane uses the straight-line method. Prepare the journal entry to record annual depreciation for 2015
The annual depreciation for the truck can be calculated as follows:
Cost of truck - Salvage value
= $66,560 - $8,320
= $58,240
Useful life of the truck = 4 years
Depreciation expense per year = $58,240 / 4 years
= $14,560
To record the annual depreciation for 2015, the journal entry would be:
Depreciation Expense $14,560
Accumulated Depreciation - Truck $14,560
This entry debits Depreciation Expense for $14,560, which represents the amount of the truck's value that was used up during 2015. It credits Accumulated Depreciation - Truck for the same amount, which is a contra-asset account that tracks the total depreciation that has been recorded for the truck since it was acquired.
Read more about depreciation here:https://brainly.com/question/1203926
#SPJ11
Economists estimate the target rate of unemployment in order to determine: a. the unemployment rate. b. the inflation rate. c. the level of output. d. potential output
Economists estimate the target rate of unemployment in order to determine d) potential output.
The target rate of unemployment is the level of unemployment at which the economy is operating at full capacity, also known as the natural rate of unemployment. When the unemployment rate is at the natural rate, the economy is producing at its potential output level.
Potential output is the maximum level of output that an economy can produce when all its resources are utilized efficiently. It is determined by the availability of resources such as labor, capital, and technology. When an economy is producing at its potential output, it is operating at maximum efficiency and any increase in output beyond this level is unsustainable.
Therefore, estimating the target rate of unemployment helps economists to determine the level of output that the economy is capable of producing sustainably. This information is important for policymakers to make decisions related to monetary and fiscal policies, such as setting interest rates and government spending, to ensure that the economy is operating at its full potential.
Therefore, the correct answer is d. potential output.
Learn more about Potential output here: https://brainly.com/question/27972321
#SPJ11
when several sign reversals in the cash flow stream occur, the irr equation can have more than one positive irr. true or false
The given statement " When several sign reversals occur in the cash flow stream, the IRR equation can have more than one positive IRR. " is True because This is because the IRR is calculated by finding the discount rate that makes the net present value (NPV) of the cash flows equal to zero.
Sign reversals occur when the cash flow stream changes from positive to negative or vice versa. In the case of multiple sign reversals, there can be more than one discount rate that makes the NPV of the cash flows equal to zero. Each of these discount rates represents a possible IRR for the project. However, only one of these discount rates will be the true IRR, which is the rate at which the project's NPV is maximized.
To determine the true IRR in cases of multiple positive IRRs, additional analysis is required. One method is to use the modified internal rate of return (MIRR) formula, which adjusts for multiple IRRs by assuming that cash flows are reinvested at the firm's cost of capital. Another method is to use sensitivity analysis to test the impact of small changes in discount rates on the project's NPV.
In summary, when multiple sign reversals occur in the cash flow stream, the IRR equation can have more than one positive IRR. However, additional analysis is necessary to determine the true IRR and make an informed investment decision.
Know more about IRR equation here:
https://brainly.com/question/29581665
#SPJ11
a product in the _____stage is usually experiencing low sales and non-existent profits. marketers are increasing promotion to raise awareness.
A product in the Freud stage is usually experiencing low sales and non-existent profits. marketers are increasing promotion to raise awareness.
Rich's obsessive attention to order and cleanliness may be a sign of an an-al obsession. The second stage in Freud's theory of psychosexual development is known as the an-al stage.
Between the ages of 18 months and 3 years, children go through this stage where they start to take control of their physiological processes, especially their bowel and bladder motions. As a result of the obsession at this point, a person may become too concerned with maintaining cleanliness and order as well as inflexible and rigid in their behaviour. Adults may have an excessive demand for control, perfectionism, and a fixation with cleanliness and orderliness as a result of this.
To know more about Freud visit:
https://brainly.com/question/28518030
#SPJ4
which is an example of proprietorship? roberta owns stock in a steel company. she receives a portion of the company's profits. edward owns a restaurant. he is responsible for all of the restaurant's debts. juan and phillip own a bookstore. they are both responsible for the bookstore's debts. janet and miriam own a flower shop. they share equally in the shop's profits.
An example of proprietorship is Edward owning a restaurant and being responsible for all of its debts.
Proprietorship refers to a business structure where an individual owns and operates a business. Edward's ownership of the restaurant and his responsibility for all its debts make it an example of a proprietorship. In this type of business, the owner has complete control over the business and receives all the profits but also bears all the risks. It is a common form of business ownership for small businesses. Janet and Miriam's ownership of a flower shop and sharing equally in the shop's profits suggest a partnership, not a proprietorship.
Learn more about Proprietorship here:
https://brainly.com/question/30039084
#SPJ11
FILL IN THE BLANK. An iteration involves going back and forth from one ______ to the order.
Option to "step" or "stage."An iteration involves going back and forth from one step or stage to the other. In the context of problem-solving or project development, iteration refers to the process of repeating and refining a sequence of steps or stages.
It entails revisiting previous steps or stages to make improvements or adjustments based on feedback, analysis, or new information. Iteration allows for continuous learning, adaptation, and refinement of a solution or project until the desired outcome is achieved.
It is a common approach in various fields, such as software development, design thinking, and research methodology, where continuous refinement and improvement are crucial for success.
Iteration enables an iterative and incremental approach, where each iteration builds upon the previous ones, leading to a more refined and effective solution or outcome.
Learn more about feedback analysis here:- brainly.com/question/31534939
#SPJ11
How do pearl buyers and the priest act as allies (in practice, not in friendship) in maintaining the social hierarchy of the town?
Pearl buyers and the priest act as allies in maintaining the social hierarchy of the town by providing a sense of stability and control. The pearl buyers provide the townspeople with a source of income, while the priest acts as a moral authority and provides a spiritual foundation.
This combination of economic and spiritual power helps to maintain the social order and keep the people in line. The pearl buyers also serve as a buffer between the upper and lower classes, as they can buy pearls from the poorer classes and resell them to the wealthier classes. This helps to create a sense of balance and keeps the social hierarchy intact.
Additionally, the priest provides guidance and structure to the community, helping to ensure that the people observe the laws and customs of the town. Through their combined influence, the pearl buyers and the priest are able to maintain the social hierarchy of the town.
know more about Pearl buyers here
https://brainly.com/question/25516076#
#SPJ11
A supplier who produces complex assemblies that are used by a manufacturer is known as a
A supplier who produces complex assemblies that are used by a manufacturer is commonly known as a Tier 1 supplier. Tier 1 suppliers are the primary source of supply for manufacturers and are responsible for delivering high-quality components and sub-assemblies on time and at competitive prices.
These suppliers work closely with the manufacturer's engineering and procurement teams to design, develop, and manufacture custom parts and components that meet the manufacturer's specifications. Tier 1 suppliers are often large companies with significant resources, capable of producing large volumes of complex parts and assemblies. They may also have global operations, with facilities located in different countries to serve their customers' needs. Tier 1 suppliers play a critical role in the supply chain, and their performance can have a significant impact on the manufacturer's ability to produce high-quality products efficiently and cost-effectively. Therefore, selecting the right Tier 1 supplier is crucial for the success of any manufacturing operation.
To Learn more about complex assemblies. Click this!
brainly.com/question/31464310
#SPJ11
money provides a way to transfer wealth into the future. this function of money is known as
The function of money that allows for the transfer of wealth into the future is known as "storing value" or "store of value."
Money serves as a medium of exchange, unit of account, and store of value.
the medium of exchange and unit of account functions are more focused on facilitating transactions and pricing goods and services, the store of value function refers to the ability of money to retain its purchasing power over time.
By storing value, money enables individuals to save wealth for future use or investment. It allows them to preserve their economic resources and transfer them into the future, thereby facilitating economic planning and stability. Money's store of value function is particularly important in environments where inflation or other factors erode the value of other assets or goods over time.
Overall, the function of money as a store of value allows individuals and businessto hold and transfer wealth across time, providing stability and flexibility in managing economic resources.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
Exercise 3-3B Contribution margin ratio Martinez Company incurs annual fixed costs of $300,000. Variable costs for Martinez's product are $42 per unit, and the sales price is $70 per unit. Martinez desires to earn a profit of $120,000. Required Use the contribution margin ratio approach to determine the sales volume in dollars and units required to earn the desired profit.
To determine the sales volume in dollars and units required to earn the desired profit of $120,000, Martinez Company needs to use the contribution margin ratio approach. First, we need to calculate the contribution margin per unit by subtracting the variable cost per unit from the sales price per unit, which is $70 - $42 = $28. The contribution margin ratio is calculated by dividing the contribution margin per unit by the sales price per unit, which is $28/$70 = 0.4 or 40%.
To earn a profit of $120,000, Martinez needs to cover their fixed costs of $300,000 and earn an additional $120,000, making their total required profit $420,000. Using the formula, we can calculate the sales volume required in dollars:
Sales volume = (Fixed costs + Desired profit) / Contribution margin ratio
Sales volume = ($300,000 + $120,000) / 0.4 = $1,050,000
Therefore, Martinez needs to generate sales of $1,050,000 to earn a profit of $120,000. To determine the sales volume required in units, we can divide the sales volume in dollars by the sales price per unit, which is $70:
Sales volume in units = $1,050,000 / $70 = 15,000 units.
Therefore, Martinez needs to sell 15,000 units to generate sales of $1,050,000 and earn a profit of $120,000, after covering their fixed and variable costs.
Hi! I'd be happy to help you with this problem. To calculate the sales volume in dollars and units required for Martinez Company to earn the desired profit, we need to use the contribution margin ratio approach.
Step 1: Calculate the contribution margin per unit.
Contribution margin per unit = Sales price per unit - Variable cost per unit
= $70 - $42
= $28 per unit
Step 2: Calculate the contribution margin ratio.
Contribution margin ratio = Contribution margin per unit / Sales price per unit
= $28 / $70
= 0.4 or 40%
Step 3: Calculate the total desired profit and fixed costs.
Total desired profit + Fixed costs = $120,000 + $300,000
= $420,000
Step 4: Calculate the sales volume in dollars.
Sales volume in dollars = Total desired profit and fixed costs / Contribution margin ratio
= $420,000 / 0.4
= $1,050,000
Step 5: Calculate the sales volume in units.
Sales volume in units = Sales volume in dollars / Sales price per unit
= $1,050,000 / $70
= 15,000 units
To achieve the desired profit of $120,000, Martinez Company must generate sales of $1,050,000 and sell 15,000 units.
To know more about Contribution visit:
https://brainly.com/question/24025051
#SPJ11
If the annual stock market returns for Berry Company were 19 percent, 13 percent, and -8 percent, what was the arithmetic mean for those 3 years?
If the arithmetic mean of the annual stock market returns for Berry Company were 19 percent, 13 percent, and -8 percent, then its arithmetic mean for those 3 years is 8%.
To calculate the arithmetic mean, we sum up the annual returns for each year and divide the total by the number of years. In this case, the annual returns for Berry Company are 19%, 13%, and -8%.
Adding these three numbers, we get 19 + 13 + (-8) = 24. Dividing this sum by 3 (the number of years), we find that the arithmetic mean is 24 / 3 = 8%.
The arithmetic mean represents the average return over the specified period. It provides a simple measure to understand the overall performance of the investment over the given time frame.
In this case, the arithmetic mean return of 8% suggests that, on average, Berry Company's stock market returns were positive, indicating a generally favorable performance over the three-year period.
It's worth noting that while the arithmetic mean provides a useful summary statistic, it does not capture the variability or fluctuations in returns over the individual years.
Investors should consider other measures such as standard deviation or other statistical tools to assess the risk and volatility associated with the investment.
Learn more about arithmetic mean here:
https://brainly.com/question/29156837
#SPJ11
a project has the following cash flows: year cash flow 0 $65,200 1 –31,200 2 –49,100 a. what is the irr for this project?
The IRR for this project is approximately 24.2%.
To calculate the internal rate of return (IRR), we need to find the discount rate that makes the net present value (NPV) of all cash flows equal to zero. In this case, we have cash outflows of $65,200 in year 0, cash inflows of $31,200 in year 1, and $49,100 in year 2.
Using a financial calculator or spreadsheet software, we can find that the IRR for this project is approximately 24.2%. This means that the project is expected to generate a return of 24.2% per year, which is higher than the required rate of return for the investment.
Alternatively, we can use the trial-and-error method to find the IRR. By trying different discount rates until the NPV of all cash flows equals zero, we can find that the IRR is approximately 24.2%.
To know more about internal rate of return, refer here:
https://brainly.com/question/13016230#
#SPJ11
a wholesale retailer like costco can in recent times be said to have adopted a:
A wholesale retailer like Costco can, in recent times, be said to have adopted a warehouse club business model.
This model focuses on providing bulk items at discounted prices to their members.
Membership-Based: Warehouse clubs typically require customers to become members by paying an annual fee. In return, members gain access to the club and its offerings. The membership fee helps offset the costs associated with providing discounted prices and other benefits to members.
Bulk Purchases: Warehouse clubs specialize in selling products in large quantities or bulk. This allows them to negotiate lower prices from suppliers and pass on the savings to their members. By purchasing larger volumes, warehouse retailers can offer substantial discounts compared to traditional retailers.
Wide Product Selection: Warehouse clubs typically offer a wide range of products across various categories, including groceries, household items, electronics, appliances, clothing, and more. This variety enables customers to find a diverse range of items conveniently in one location.
Warehouse-Like Store Layout: Warehouse clubs have a distinctive store layout that resembles a large warehouse. The emphasis is on efficiency and functionality rather than elaborate store design. Products are often displayed on pallets or stacked on shelves, making it easier to restock and facilitate quick and efficient shopping experiences.
Limited Brand Selection: To maintain lower prices, warehouse clubs often offer a limited selection of brands and products compared to traditional retailers. This focus on a smaller number of items allows them to streamline their operations and negotiate better deals with suppliers.
Value-Added Services: Many warehouse clubs provide additional services to enhance the membership experience. These services may include optical centers, pharmacies, gas stations, tire centers, travel booking, and even food courts or cafes.
Customer Loyalty: By offering discounted prices and value-added services, warehouse clubs aim to build customer loyalty. The membership-based model encourages repeat visits and fosters a sense of belonging among members, who often feel they are part of an exclusive community.
Cost Savings: The primary advantage for consumers shopping at warehouse clubs is the opportunity to save money. The discounted prices on bulk items allow members to enjoy significant cost savings, particularly for products they frequently use or consume.
To learn more about savings, refer below:
https://brainly.com/question/30004719
#SPJ11
If managers wanted to redesign their employees work to increase satisfaction, they should focus most on:
Offering access to promotions
Variety of work they do
Increasing pay
Increasing job security
If managers wanted to redesign their employees' work to increase satisfaction, they should focus most on B. Variety of work they do.
How to increase job satisfaction ?Investigate on work fulfillment has appeared that one of the foremost imperative variables in making work fulfillment is the assortment of work that employees are uncovered to. This could incorporate giving openings for representatives to memorize modern abilities, relegating diverse sorts of assignments, and giving representatives a few control over how they do their work.
Advertising get to to advancements, expanding pay, and expanding work security can too contribute to work fulfillment, but they are not as unequivocally relate
Find out more on job satisfaction at https://brainly.com/question/14006253
#SPJ1
_____ change occurs frequently, with fewer and shorter periods of stability. question 18 options: a) disruptive b) continuous c) structural d) episodic
Disruptive change occurs frequently, with fewer and shorter periods of stability(A).
isruptive change refers to a type of change that occurs frequently and disrupts the existing state or system. It is characterized by its unpredictable nature and the tendency to cause significant disturbances. Unlike continuous change, which happens gradually and smoothly, disruptive change is marked by sudden and impactful shifts.
This type of change often challenges established norms and requires organizations or individuals to adapt quickly in order to stay competitive or survive. The frequency and brevity of disruptive change mean that periods of stability become less common and shorter in duration.
Overall, disruptive change presents a constant need for adaptation and flexibility in the face of rapidly evolving circumstances. (Option A is the correct answer)
For more questions like Organizations click the link below:
https://brainly.com/question/30699992
#SPJ11
your organization has recently started using group decision making. you are most likely to observe that ________.
your organization has recently started using group decision making. you are most likely to observe that Collaboration,Diverse Perspectives,Longer Decision-Making Process.
When an organization starts using group decision making, you are most likely to observe the following:
1. Collaboration: Group decision making encourages collaboration among team members. You may observe more frequent discussions, brainstorming sessions, and exchange of ideas among individuals. Team members may actively contribute their perspectives and insights to the decision-making process.
2. Diverse Perspectives: Group decision making allows for the integration of diverse perspectives. Different team members bring their unique backgrounds, experiences, and expertise to the table, leading to a broader range of ideas and solutions. You may notice that discussions involve considering multiple viewpoints and exploring various alternatives.
3. Longer Decision-Making Process: Group decision making typically takes more time compared to individual decision making. As multiple individuals participate in the process and contribute their opinions, it may require more extensive discussions, evaluations, and consensus-building efforts. The decision-making process may involve multiple meetings or sessions.
4. Improved Decision Quality: Group decision making has the potential to result in improved decision quality. By involving multiple perspectives and critically evaluating s, the decision-making process can lead to more well-rounded and informed decisions. This can enhance the overall quality and effectiveness of the decisions made by the organization.
5. Potential for Conflict: With increased collaboration and diverse perspectives, there is also a potential for conflicts to arise during group decision making. Disagreements, differing opinions, and clashes of ideas may occur. Effective facilitation and conflict resolution skills may be necessary to manage and address conflicts constructively.
6. Shared Accountability: Group decision making fosters a sense of shared accountability among team members. Since decisions are made collectively, individuals tend to feel a shared responsibility for the outcomes. This can enhance team cohesion and commitment to the decisions made.
It is important to note that the specific outcomes and observations of group decision making may vary depending on factors such as the organizational culture, the nature of the decisions being made, and the dynamics within the group.
Learn more about nature here:
https://brainly.com/question/30406208
#SPJ11
The evidence is that welfare reform in 1996 resulted in ____ welfare rolls
A. a substantial increase in
B. a slight increase in
C. a substantial decrease in
D. no impact on
The evidence is that welfare reform in 1996 resulted in C. a substantial decrease in welfare rolls.
The evidence shows that welfare reform in 1996 resulted in a substantial decrease in welfare rolls. The Personal Responsibility and Work Opportunity Reconciliation Act (PRWORA) of 1996, commonly known as welfare reform, introduced significant changes to the welfare system in the United States. The reform aimed to promote self-sufficiency and reduce long-term dependence on welfare assistance.
One of the main objectives of the welfare reform was to decrease the number of individuals relying on welfare programs by implementing stricter eligibility requirements, time limits on benefits, and work requirements. These changes were successful in reducing the welfare rolls as many individuals transitioned from welfare to employment or other forms of self-support.
Therefore, option C is the correct answer: The evidence shows that welfare reform in 1996 resulted in a substantial decrease in welfare rolls.
Learn more about warfare reform : https://brainly.com/question/30453686
#SPJ11