The length of the organ pipe is approximately 4.6 meters.
The length of the organ pipe can be determined using the relationship between frequency, speed of sound, and length in a closed pipe. In a closed pipe, only odd harmonics are present. The second mode corresponds to the 3rd harmonic (n=3) and the third mode corresponds to the 5th harmonic (n=5).
Given:
Δf = 300 Hz (difference in frequency)
v = 345 m/s (speed of sound)
For a closed pipe, the formula for frequency is:
f = (2n-1)(v/4L), where n is the harmonic number and L is the length of the pipe.
For the second mode (n=3):
f2 = (2(3)-1)(v/4L) = 5(v/4L)
For the third mode (n=5):
f3 = (2(5)-1)(v/4L) = 9(v/4L)
Since the third mode is 300 Hz higher than the second mode:
f3 - f2 = Δf
Substitute the expressions for f2 and f3:
9(v/4L) - 5(v/4L) = 300
Combine the terms:
4(v/4L) = 300
Divide both sides by 4:
v/L = 75
Now, solve for L:
L = v/75 = 345/75 ≈ 4.6 m
Learn more about length here:-
https://brainly.com/question/32232199
#SPJ11
What type of wave is this. I can figure it out
Which of the following Resistors A, B, C or D, would use the least power? Make
your claim, give evidence and explain your reasoning. You may use math to support
your claim.
Please Help.
i think the answer is D 10.0
John is hiking and notices a small stream of water flowing down the side of the mountain. What part of the water cycle is John observing?
Question 3 options:
Runoff
Evaporation
Condensation
Precipitation
Answer:
A runoff
Explanation: A runoff is when frozen water melts so if it falls down a mouantan there probably melting ice hope this helps :} pls give brainlest
John is hiking and notices a small stream of water flowing down the side of the mountain. In this John is experiencing runoff of the water cycle. Thus, the correct option is A.
What is Runoff?Surface runoff is the flow of water which is occurring on the ground surface when there is excess rainwater, storm water, melt water, or other sources of water, which can no longer sufficiently rapidly infiltrate in the soil of the region.
Runoff occurs in the excessive rainwater and it saturates the ground surface. Rivers and lakes are the results of water runoff. There is some evaporation from the water runoff into the atmosphere however for the most part water in the rivers and lakes returns back to the oceans.
Therefore, the correct option is A.
Learn more about Runoff here:
https://brainly.com/question/2140871
#SPJ6
ANSWER QUCIK
PLS THANK YOU
You have a working electrical parallel circuit with three light bulbs, then 1 bulb burns
out.
Describe how electric current flows through the parallel circuit after 1 of the 3 bulbs
burns out?
Answer:
but the answer should be no as if 3 bulbs are connected together if one burns out the whole circuit will stop .hope you understood
please mark me as brainlist
A beam of light has a wavelength of 5.06*10^ ^ 7m What is the frequency of the light?
Answer:
59.23499537
Explanation:
The Purpose Of Stretching Is :
A. To increase your flexibility
B.To increase your range of motion during workout
C.To increase blood flow to the muscles
D. All of the above
Answer:
all of the above are correct
Explanation:
hope it helps you
please mark me as brainlist
Can someone help me?in the phy
Answer:
so your answer is gonna be the first one which is A
Based from the flow chart, what can you generalize about the formation of typhoons? How do typhoons develop?
Answer: Warm water from the ocean is needed to develop typhoon
Pls Rate this as Brilliant Answer thank you :) keep on learning
Typhoons form when strong winds blow into warm areas of the ocean. These winds pick up moisture and rise, bringing colder air with them. This creates pressure, causing the winds to move quickly. The winds revolve or spin around a central point known as an eye.
What is typhoon ?A typhoon is a mature tropical cyclone that forms in the Northern Hemisphere between 180° and 100°E. The Northwestern Pacific Basin is the most active tropical cyclone basin on Earth, accounting for nearly one-third of the world's annual tropical cyclones.
The Philippines is just above the equator and faces the western Pacific, with little else to absorb storm energy before it reaches land. Storms are fueled by warm, tropical waters, which produce approximately 20 typhoons per year.
Hurricanes and typhoons can wreak havoc on coastlines and hundreds of miles inland. They can generate winds of up to 155 mph, as well as tornadoes and microbursts.
Thus, Typhoons form when strong winds blow into warm areas of the ocean.
To learn more about typhoon, follow the link;
https://brainly.com/question/1933929
#SPJ5
A 6kg bowling ball is rolled down the bowling lane with a force of 42N, what is the acceleration of the ball?
Answer:
7 m/s²
Explanation:
F= ma
A= F/m = 42/6 = 7 m/s²
Please help!!!!!!:>>>>>>
Answer: 6V
Explanation: parallel circuit, the voltage is the same for each resistor.
what makes magnets work
You have two lens A and B of focal length +50cm and -50cm respectively. The nature and power of the lenses respectively isa. Concave, -2 D ; Convex, +2 D b. Convex, +2 D; Concave, - 2 D
Answer:
Concave, +2D
Convex -2D
Explanation:
Power of a lens is the reciprocal of its focal length.
For lens of +50cm = 0.5m
Power of the lens = 1/0.5
Power of the lens = +2Dioptres
Since the focal length is positive, the lens is concave
For the lens of -50cm = -0.5m
Power = 1/-0.5
Power = -2D dioptres
Since the focal length is negative, the lens is convex
what is the resistance of an object that produces a current of a 6 A and has a voltage of 30
Answer:
this is the answer the required questions
hope you like this
A clock which has a brass pendulum beats second correctly when the temperature of
the room is 30°c. It gains the time 15.55 sec per day when the temperature of the
rooms falls to 10°C. Find the linear expansivity of brass.
Answer:
- 0.0481666 °C^-1
Explanation:
Linear expansivity of brass, α
α = (2T - 2T0) / T0.dt
T0 = 30°
dt = change in temperature = 30 - 10 = 20°C
T = 15.55 sec
α = (2*15.55 - 2*30) / 30*20
α = (31.1 - 60) / 600
α = - 28.9 / 600
α = - 0.0481666 °C^-1
pls help i’ll give brainliest if you give a correct answer!!
Answer: The gravitational force acting on the table.
Explanation:
Car manufacturers use radiation for which task? sealing windows drying paint cleaning tires lubricating engines
Answer: drying paint
Explanation:
From the options that are given in the question, we should note that car manufacturers use radiation for drying paint.
The radiation is vital as it keeps the car cool and also helps in the reduction if heat in the vehicle. The other options such as sealing windows, cleaning tires and lubricating engines aren't true as radiation isn't used for that purpose by the car manufacturers.
Answer:
drying paint
Explanation:
PLEASEEE HURRY!!
Can you tell me How the sun is responsible for all of the energy here on Earth?
Answer:
Explanation:
All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.
READ ALL PLEASE
So I have been giving away points
But now that i have a lot I shall do another points give away yes
Now hurry and add a answer :V
Answer:
can I have please I will follow u..............
An object’s momentum includes its __________.
Answer: Momentum can be defined as "mass in motion
Explanation:
Unlike Electromagnetic waves, Mechanical waves need a to
transfer energy
A 2.0kg pendulum swings from point A of a height of 0.10m to a point B of the same height. The heights are relative to the lowerst height. What is the change in gravitational potential energy from A to B?
A 2.0 kg pendulum swings from point A of height yA = 0.10 m to point B of the same height. The heights are relative to the lowest height.
What is the change in gravitational potential energy from A to B?
Answer: 0 J
How are humidity and precipitation related?
A. When humidity is low, the chance of precipitation is high.
b.When humidity is high, the chance of precipitation is high.
c.When humidity is high, the chance of precipitation is low.
d.Changes in humidity do not cause precipitation.
Answer:
Relative humidity depends on the amount moisture actually in the air at some temperature to the amount of moisture that the air can hold.
For instance, at 25 deg C the air has a saturation pressure of 23.76 mm of Hg.
That means that if at that temperature the pressure of the water vapor in the air reaches 23.76 mm Hg then the air is 100% saturated.
I believe the standard air pressure at 25 deg C is 760 mm Hg.
Now if the pressure of the water vapor in the air is 1/2 * 23.76 = 11.88 mm then the air is 50% saturated and the relative hunidity is 50 %.
At 100% relative humidity rain occurs (the air can't hold any more water).
When humidity is high, the chance of precipitation is high. The correct answer is b. When humidity is high, the chance of precipitation is high.
The amount of moisture or water vapor in the air is referred to as humidity. Relative humidity is a common way to measure it since it shows how much moisture the air is holding relative to how much it could contain at a particular temperature.
Any type of water that falls from the atmosphere and makes it to the surface of the Earth is referred to as precipitation. Examples include rain, snow, sleet, and hail.
When humidity levels are high, there is a lot of moisture in the air, which increases the possibility that saturation will occur. Excess water vapor condenses into visible water droplets or ice crystals as the air gets saturated, creating clouds. Condensed moisture in the clouds eventually gains enough weight to return to Earth as precipitation.
Therefore, when humidity is high, the chance of precipitation is high. The correct answer is:
b. When humidity is high, the chance of precipitation is high.
To know more about humidity, click here:
https://brainly.com/question/28528740
#SPJ6
if a person is 6.25 m away from a 60.0 w speaker, what is the sound level they are hearing?
(treat the speaker as a point source.)
Answer:
111dB
Explanation:
First, find the intensity of the sound using the formula I = Power / 4 x pi x radius ^2
So
60.0 / (4 x 3.14 (6.25)^2)
= 0.122
Then plug that into the equation to find sound level, which is 10log( I / Io)
Io being (1 x 10^-12)
So
10log(0.122 / 1 x 10^-12)
= 111dB
Hope this helps :)
Identify the following as
Potential Energy or Kinetic Energy
1. A car in the driveway. Potential energy
2. Matt rolling down a hill. Kinetic energy
3. Katie and Leo kissing.
4. A battery on my desk.
5. The water just before it goes down a waterfall.
6. A lawnmower running.
7. Mrs. Rey yelling at you.
8.A toy
9.A table with a spread of food
10. The kids playing on the bus.
If the total force acts in the opposite direction as the cabinet is sliding, the cabinet would
A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains the same speed, but changes direction
Explain why the radiative zone of the sun is hotter than the corona of the sun
Answer: Because The spectra provided evidence to explain why the sun's atmosphere is so much hotter than its surface. ... Clear evidence now suggests that the heating mechanism depends on regular, but intermittent explosive bursts of heat, rather than on continuous gradual heating.
Explanation:
An 850 kg elevator is accelerating upwards at 3.0 m/s2. Calculate the tension in the cable.
Answer:
10880N
Explanation:
We are given that
Mass of elevator, m=850 kg
Acceleration, [tex]a=3m/s^2[/tex]
[tex]g=9.8m/s^2[/tex]
We have to find the tension in the cable.
We know that
When elevator is accelerating upward then tension in the cable
[tex]T=m(a+g)[/tex]
Using the formula
[tex]T=850(3+9.8)[/tex]
[tex]T=10880N[/tex]
A 12 kg object speeds up from an initial velocity of 10 m/s north to a final velocity of 15 m/s north. Calculate the change in momentum
Answer:
60m/s
Explanation:
momentum = Mass × Velocity
Initial Momentum = 12 × 10
= 120
Final Momentum = 12×15
=180
Change in Momentum = 180 - 120
= 60m/s
Answer:
60Explanation:
formula for change in momentum = F =∆p/∆t
F∆t = ∆p
∆p = m(v - Vo)
∆p = 12(15-10)
=12(5)= 60
A spring with k = 33.5 N/m has a
1.20 kg mass attached. It is pulled
0.120 m and released. How much
mechanical energy does it have?
(Unit = J)
Answer:
M.E = 0.241 Joules.
Explanation:
Given the following data;
Spring constant, k = 33.5 N/m
Extension, e = 0.12m
Mass = 1.20kg
To find the mechanical energy (M.E);
Mathematically, mechanical energy is given by this formula;
M.E = ½ke²
Where;
k is the constant of elasticity (spring constant). e is the extension of the string.Substituting into the equation, we have;
M.E = ½*33.5*0.12²
M.E = ½*33.5*0.0144
M.E = 0.4824/2
M.E = 0.241 Joules.