any help here please ???​

The distance traveled by the arrow and horizontal velocity are directly proportional, thus when the distance increases, an increase in initial velocity will allow the arrow to hit the target.

If the horizontal distance the projectile would travel before hitting the target is 70.67 m, the time of motion of the projectile is calculated as;

X = Vx(t)

t = X/Vx

t = X/Vcosθ

t = (70.67) / (45 x cos10)

t = 1.6 s

When the archery target is moved further away from the archer, the archer needs increase the initial velocity of the arrow assuming the angle of projection is constant.

Since the distance and horizontal velocity are directly proportional to each other, thus when the distance increases, an increase in initial velocity will allow the arrow to hit the target.

Learn more about velocity of projectile here: https://brainly.com/question/12870645

Snell's law is defined as “The ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant, for the light of a given colour and for the given pair of media”.

Explanation:

it is not a arithmetic sequence

3,0,-3,-6 is the correct arithmetic sequence. So, the correct option is C.

An arithmetic sequence is defined as a sequence where the common difference between any two consecutive terms is constant. A sequence is explained as a collection of numbers that follow a pattern such as the sequence 2, 7, 12, 17, ... is an arithmetic sequence as there is a pattern where each number is obtained by adding 5 to its previous term. Is performed.

For above given information,

3,0,-3,-6 is the correct arithmetic sequence.

as, d is called as the common difference of the series

d=0 - 3= - 3 - 0 = -6 - (-3)

d= - 3

An arithmetic sequence is called as the equal common difference in each progressive term.

Thus, 3,0,-3,-6 is the correct arithmetic sequence. So, the correct option is C.

Learn more about Arithmetic sequence, here:

https://brainly.com/question/15412619

#SPJ2

Your question is incomplete, most probably the complete question is:

Which of the following is an arithmetic sequence?

a.2,4,16,32

b.2,3,7,1,

c.3,0,-3,-6

d.5,-5,5,-5

Hello!

We know that at the BOTTOM of the pendulum's trajectory, the bob has a maximum speed. This means that its KINETIC ENERGY is at a maximum, while its Gravitational POTENTIAL ENERGY is at a minimum.

On the other hand, when the bob is at its highest points, the bob has a velocity of 0 m/s, so its KE is at a minimum and its PE is at a maximum.

We can use the work-energy theorem to solve. Let the Initial Energy equal the bob's energy at one of the sides, while the final Energy equals the bob's energy at the bottom.

[tex]E_i = E_f\\\\PE = KE[/tex]

Recall that:
PE = mgh

m = mass (kg)

g = acceleration due to gravity (m/s²)

h = height (m)

KE = 1/2mv²

m = mass (kg)

v = velocity (m/s)

Set the two equal and solve for 'h'.

[tex]mgh = \frac{1}{2}mv^2[/tex]

Cancel mass.

[tex]gh = \frac{1}{2}v^2[/tex]

Solve for 'h'.

[tex]h = \frac{v^2}{2g}\\\\h = \frac{3^2}{2(9.8)} = \boxed{0.459 m}[/tex]

Answer:

1.     121.05 kg m/s NW

2.     94.5 kg m/s NW

3.     26.55 kg m/s NW

Explanation:

Give the mathematical expression for coulomb's force if q1, q2 are the magnitude of charges and r is the distance between them.

F=K q1q2/r2

When you rub a dry cloth across glass, it creates charged static electricity, which attracts little non-charged dust particles.

As a therapist who specializes in dreams, I would interpret Justina’s dream by using: 17. Freud’s wish-fulfilling theory.

Sigmund Freud was an Austrian physiologist, neurologist, medical doctor and the founder of psychoanalysis. Also, Freud was born in Moravia on the 6th of May, 1856 and he was famously known around the world for his works on psychoanalytic theory of personality development.

In 1923, Sigmund Freud developed the personality theory through which he strongly argued that a person’s personality (human psyche) is structured into three (3) key parts and these include:

According to Sigmund Freud, wish fulfillment simply means the satisfaction of a human desire through an involuntary thought process such as dreams. Thus, it typically happens to a person when unconscious desires are adequately repressed by both the ego and superego.

Read more on wish fulfillment here: https://brainly.com/question/13409626

Badminton shoes are specifically designed for badminton footwork and movement. Rubber that is anti-slip and wear-resistant is ideal for the soles of badminton shoes, while the midfoot area requires excellent shock-absorption and resilience

Answer:

It's the perfect shoe to wear on the fields they play on like so they don't slip

Answer:

I think D sorry if I'm wrong

Answer:

300 m/s

Explanation:

2d = vt

v = 2d/t

v = 2×90/.3

v=300 m/s

d = distance

t = time

v = velocity/speed of sound

Answer:

Mass

Explanation:

Gravity is a force (sort of keeping something in place)

A push is force (force pushing something)

Friction is force (force that resists sliding or rolling)

Answer:

Replacement-Level Fertility

Another important population characteristic that differ btw develop nation and developing nations is relates to births is replacement-level fertility. Replacement-level fertility is the fertility rate that will result in the replacement of the parents in the population. Again, in an ideal world, the human replacement-level fertility rate would be exactly two. This would mean that each couple would produce two offspring that would replace them in the population. If this occurred, then the human population would stay at a stable rate

Answer:

Explanation:

Because if you don't have strong bones, you will have problems with your health. So, a strong skeletal system is important for leading a healthy life.

Answer:

C

Explanation:

Reflection.

Answer:

Draw a table showing the different forms of the first law for the four processes described.

The power delivered by the motor lift in elevating the 10 passengers at the speed of 16.8 m/s is 205800 Watts

Power is simply defined as the rate at which energy is consumed. It can be expressed mathematically as

Power (P) = Force (F) × velocity (v)

P = Fv

F = ma

F = 1250 × 9.8

F = 12250 N

P = Fv

P = 12250 × 16.8

P = 205800 Watts

Learn more about power:

https://brainly.com/question/5684937

Answer:

7 minutes

Explanation:

Explanation:

Power = work / time

Power = force × distance / time

500 W = 210 N × 1000 m / t

t = 420 s

t = 7 min

[tex]\text{Given that,}\\\\\text{Mass, m =10 kg}\\\\\text{Time, t = 8 sec}\\\\\text{Velocity, v = 4~m/s}\\\\\text{When a body is moving upwards,}\\\\\text{Tension,}~ T=mg +ma\\\\~~~~~~~~~~~~~~~=mg+m\left(\dfrac{v-u}t \right)\\\\~~~~~~~~~~~~~~~=10(10)+10\left(\dfrac{4-0}8\right)\\\\~~~~~~~~~~~~~~~=100+10\left(\dfrac 12\right)\\\\~~~~~~~~~~~~~~~=100+5\\\\~~~~~~~~~~~~~~~=105~N[/tex]

(a) The initial energy of the mass is 76.485 J.

(b) The compression of the spring in the absence of friction is 21.2 cm.

(c)  The compression of the spring in the presence of friction is 19.4 cm.

The initial energy of the mass is determined as follows;

E = K.E + P.E

E = ¹/₂mv² + mgh

where;

E = ¹/₂mv²  + mg x Lsinθ

P.E = ¹/₂(9.4)(2.5)² +  (9.4)(9.8)(0.87)(sin36)

P.E = 76.485 J

The compression of the spring in the absence of friction is calculated as follows;

Ux = E

¹/₂kx² = 76.485

kx² = 2(76.485)

x² = (2 x 76.485)/k

x = √(2 x 76.485)/k

x = √(2 x 76.485 / 3413.7)

x = 0.212 m

x = 21.2 cm

The compression of the spring in the presence of friction is determined by applying the principle of conservation of energy.

E - Fd = Ux

E - μmgd = ¹/₂kx²

76.11 - (0.27 x 9.4 x 9.8 x 0.48) = ¹/₂(3413)x²

64.17 = 1706.5x²

x² = 0.0376

x = √0.0376

x = 0.194

x = 19.4 cm

Learn more about conservation of energy here: https://brainly.com/question/166559

The magnitude of magnitude force on the proton is 2.4 x 10⁻¹² N.

The magnitude of magnitude force on the proton is calculated as follows;

F = qvB sinθ

where;

Substitute the given parameters and solve for the magnetic force.

F = (1.6 x 10⁻¹⁹) x (3 x 10⁶) x (5) X(sin90)

F = 2.4 x 10⁻¹² N

Thus, the magnitude of magnitude force on the proton is 2.4 x 10⁻¹² N.

Learn more about magnetic force here: https://brainly.com/question/13277365

The lifting force when a child pushes a toy truck up an inclined plane is  equal to the total amount of work done.

The work-energy theroem states, the work done on an object is equal to the change in mechanical energy of the object.

The net force applied by the child on the truck, will create a lifting force on the object.

Fd - Ffd = k.E

Where;

Thus, the lifting force when a child pushes a toy truck up an inclined plane is  equal to the total amount of work done.

Learn more about work-energy theorem here: https://brainly.com/question/22236101

Answer:

A

Explanation:

E. An ocean wave moving through water is an example of a mechanical wave

e.g sound waves wave on a rope or string

and Ans a is also correct

In mechanical waves, the energy is transferred through the vibration of the particles.

Mechanical waves are the type of waves that transfers energy through the vibration of particles. Since, mechanical waves require a medium to transfer energy, they carry energy through matter.

Both longitudinal and transverse waves are two types of mechanical waves.

It is known that mechanical waves propagate through medium like matter, water, etc. Therefore, an ocean wave moving through water is an example of a mechanical wave.

To learn more about mechanical waves, click:

https://brainly.com/question/24459019

#SPJ2

Answer:

It's A: Flute!

Answer:

It is B

Explanation:

Option B talks about how the frequency of the wave increases the shorter it's wavelengths

Answer:

It's b

Explanation:

Answer:

The temperature of pure melting ice at normal atmospheric pressure is known as the lower fixed point of thermometer

The lower fixed point of a thermometer is the temperature of a pure melting ice at atmospheric pressure of 1 atm

A thermometer is an instrument used in measuring temperature. iThermometers usually have toe fixed ponts the upper fixed pont and the lower fixed point.

The lower fixed point corresponds to the temperature of a pure melting ice at 1 atm

1 atm is normal atmospheric pressure and equal to 101325 Pa

This is an experiment that explains the Bernoulli principle. According to this principle, at the bottom of the spoon, there will be a reduction in pressure.

So the pressure at the bottom of the spoon reduces because the velocity of the water is larger and the height of the column of water is smaller at this part.

So the spoon is attracted to the water at the point of lowest pressure because objects gravitate to low-pressure points.

Learn more about the Bernoulli Principle at:

https://brainly.com/question/24623919

Newton's law of universal gravitation is typically stated that every particle attracts every particle in the universe with force that is directly proportional to the result of their masses and inversely proportional to the square of distance between their centers.

The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.

The gauge pressure in the balloon is the pressure inside the balloon due to the water columns relative to the atmospheric pressure.

The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is calculated as follows;

P = ρgΔh

P = (1,000)(9.8)(0.0171)

P = 167.58 Pa

Thus, the gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.

Learn more about gauge pressures here: https://brainly.com/question/6984092