arrange the fertilizers in decreasing order of mass percentage of nitrogen.a. (NH4)2HPO4
b. (NH4)2SO4
c. KNO3
d. (NH4)H2PO4
e. NH3
f. NH4NO3

Answer: the pressure of the atm is 616

Explanation:

Answer:

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

P1V1/T1 = P2V2/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, respectively, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas, respectively. Since the temperature is constant in this case, we can simplify the equation to:

P1V1 = P2V2

We can substitute the given values into the equation and solve for V2:

P1 = 380 torr

V1 = 12.0 L

P2 = 760 torr

Therefore:

V2 = (P1 x V1) / P2

V2 = (380 torr x 12.0 L) / 760 torr

V2 = 6.0 L

Therefore, the volume of the gas at a pressure of 760 torr is 6.0 L, assuming the temperature remains constant.

Explanation:

Answer:The new volume would be 6 liters.

Explanation:

PV=nRT

P is pressure in atm (760 torr = 1 atm);

V is volume in liters;

n is the number of moles;

R is the constant 0.0821;

T is temperature in Kelvin.

n, R, and T are constant; therefore,

P1V1=P2V2

Convert the torr into atm

P1 = 380torr/760torr×atm^−1

= 0.5 atm

P2 = 760torr/760torr×atm^−1

= 1 atm

Set the volume

V1 = 12 L

V2= x L

P1V1=P2V2

0.5atm×12L= 1atm×xL

xL = 6L

The new volume would be 6 liters.

You may use the following formula to convert ppm (parts per million) to mg/L (milligrammes per litre): 1 mg/L equals 1 ppm.

As there is a 1:1 ratio between parts per million and milligrammes per litre, one part per million is equivalent to one milligramme per litre. As both ppm and mg/L are measures of concentration, this connection may be explained by the fact that ppm measures the parts of a drug per million parts of the solution and mg/L measures the number of milligrammes of a material per litre of the solution. Just multiply the ppm number by 1, which is the conversion factor between the two units, to convert ppm to mg/L. Any number in ppm may be quickly and simply converted to mg/L using this straightforward procedure.

Learn more about ppm here:

https://brainly.com/question/16727593

#SPJ4

The student will obtain a calculated concentration of the acid that is slightly more than 0.0800 M.

Molarity is a unit of concentration used in chemistry to measure the amount of a substance dissolved in a solution. It is defined as the number of moles of solute per liter of solution, denoted by the symbol M. In other words, molarity tells us how much solute is present in a given volume of solution. To calculate molarity, you need to know the amount of solute (in moles) and the volume of the solution (in liters). The formula for molarity is: Molarity = moles of solute / liters of solution. Molarity is a measure of the concentration of a solute in a solution, defined as the number of moles of solute per liter of solution. It is typically represented by the symbol M and has units of moles per liter (mol/L).

Here,

When an indicator is used, the end-point of the titration is usually slightly past the equivalence point. This means that the volume of NaOH required to reach the end-point is slightly more than the volume required to reach the equivalence point. As a result, the calculated concentration of the acid will be slightly higher than the true value.

To know more about molarity,

https://brainly.com/question/8732513

#SPJ1

More firmly than the substrate, an enzyme binds the product. False. An enzyme only has one use before it is no longer functional in the cell.

An enzyme's active site binds the reaction's substrate more firmly than the transition state intermediate does.

In a location on the enzyme molecule known as the active site, enzymes precisely and tightly bind both reactant molecules (referred to as the substrate) (Figurebelow).

Enzymes place reactants correctly so they do not have to resist intermolecular forces that would otherwise drive them apart by binding reactants at the active site. The molecules can now interact with less energy because to this.

Using alternate routes with lower activation energies may also be made possible by enzymes.

Learn more about substrate here:

https://brainly.com/question/11370054

#SPJ4

False, Enzymes are biological catalysts that facilitate chemical reactions by lowering the activation energy required for the reaction to occur.

Enzymes do this by binding to the substrate(s) involved in the reaction and forming an enzyme-substrate complex. This complex is held together by a variety of non-covalent interactions such as hydrogen bonds, van der Waals forces, and hydrophobic interactions.

In some cases, the product(s) of the reaction may also bind to the enzyme, forming an enzyme-product complex. However, this complex is typically less stable than the enzyme-substrate complex, as the enzyme has evolved to release the product(s) once they are formed. The enzyme-substrate complex is usually held together more tightly than the enzyme-product complex, as the enzyme has a higher affinity for the substrate(s) than the product(s). Therefore, the statement "An enzyme binds the product more tightly than the substrate" is false.

Learn more about Enzymes:

brainly.com/question/14953274

#SPJ4

It's possible that the student made an error during the experiment, such as not measuring the volume of water correctly or making a mistake in the calculation. It's also possible that there were external factors that affected the measurement, such as the temperature of the water, the equipment used, or the presence of impurities in the water.

What is Density?

Density is a physical property of matter that describes how much mass is contained in a given volume of a substance. It is calculated by dividing the mass of an object by its volume, and is typically expressed in units such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).

In simpler terms, density is a measure of how closely packed the atoms or molecules are within a substance. Substances with a higher density have more mass per unit volume, while substances with a lower density have less mass per unit volume. For example, lead is a dense material with a density of about 11.3 g/cm³, while air is much less dense with a density of about 0.0012 g/cm³ at room temperature and atmospheric pressure.

To determine the cause of the discrepancy, the student could repeat the experiment multiple times to see if the results are consistent, use different methods or equipment to measure the density of water, or compare the results with other published values to see if they are within an acceptable range. It's important for the student to identify and correct any sources of error to ensure the accuracy of their results.

Learn more about Density from given link

https://brainly.com/question/1354972

#SPJ1

Only a Bronsted-Lowry base A classification is given to H2SO4 (aq).

A minor rise in reaction temperature will result in a significant increase in the size of the reaction-rate constant, according to the equation, which is frequently expressed as an exponential function, k = Aexp(E/RT).

Inferred from the exponential part in the Following formula is that as the activation energy diminishes, a reaction's rate constant grows exponentially. The rate of a reaction increases exponentially because the rate is directly equivalent to the speed constant of a reaction.

To know more about Arrhenius visit:

https://brainly.com/question/516295

#SPJ1

The IUPAC name for C11H21+2OH is dodecan-2-ol, which is an alkanol with 12 carbon atoms and 2 hydroxyl (OH) groups.

IUPAC stands for International Union of Pure and Applied Chemistry. It is an international scientific body that sets standards for the naming of chemical substances. The IUPAC name of a substance is based on the molecular structure of the chemical, and includes information about the type and number of atoms, the number of bonds, and the various functional groups present in the molecule. It is the most precise and systematic way to name a chemical substance.

The name is derived from the prefix “dodeca-” which refers to the 12 carbon atoms, and the suffix “-2-ol” which refers to the 2 hydroxyl groups.

To learn more about IUPAC name
https://brainly.com/question/28872356
#SPJ1

In a substitution reaction, one element is kicked out or replaced by another element in the reaction. This type of reaction involves the replacement of an atom or group of atoms in a molecule with a different atom or group of atoms.

Substitution reactions can occur in various types of compounds, including organic molecules and inorganic compounds. For example, in organic chemistry, substitution reactions are common in reactions involving alkyl halides, where a halogen atom is replaced by a nucleophile (an atom or molecule that donates a pair of electrons to form a new bond). In inorganic chemistry, substitution reactions can occur in reactions involving metal ions, where one metal ion is replaced by another metal ion in a complex.

Overall, substitution reactions are important in many areas of chemistry and have many practical applications, such as in the synthesis of drugs, polymers, and other useful compounds.

Learn more about substitution here:

https://brainly.com/question/30339615

#SPJ4

The Electron Pair Geometry and molecular geometry of a molecule is determined by the electron group by counting the total number of electron pairs around a central atom.

Electron Pair Geometry defined as the the spatial arrangement of a molecule's bonds and lone pairs. It is determined by the number of electron groups. Molecular geometry can be explained as the geometry which depends on not only on the number of electron groups but also on the number of lone pairs. When the electron groups are all bond pairs, they are named exactly like the electron pair geometry. The electron pairs are the bonded electrons, lone pairs and single unpaired electrons. It the total number of electron pairs is estimated the electron pair geometry of the molecule can be drawn.

To learn more about Electron Pair Geometry

https://brainly.com/question/1458198

#SPJ4

Answer:

Explanation:

the answer is sirius

Answer:

b) Na^2+

d) O^2-

e) F^3+

Explanation:

A noble gas has a completely filled valence shell of electrons, which means it has a stable electron configuration. The electron configuration of the noble gases is given by the general formula [noble gas] ns2np6, where [noble gas] represents the electron configuration of the nearest preceding noble gas.

a) N has the electron configuration 1s2 2s2 2p3, which is not a noble gas configuration.

b) Na^2+ is formed by removing two electrons from the neutral sodium atom, which has the electron configuration 1s2 2s2 2p6 3s1. Na^2+ has the electron configuration 1s2 2s2 2p6, which is the same as the noble gas neon (1s2 2s2 2p6). Therefore, Na^2+ has the same electron configuration as a noble gas.

c) H^+ is formed by removing one electron from the neutral hydrogen atom, which has the electron configuration 1s1. H^+ has no electrons in its valence shell, so it does not have a noble gas electron configuration.

d) O^2- is formed by adding two electrons to the neutral oxygen atom, which has the electron configuration 1s2 2s2 2p4. O^2- has the electron configuration 1s2 2s2 2p6, which is the same as the noble gas neon. Therefore, O^2- has the same electron configuration as a noble gas.

e) F^3+ is formed by removing three electrons from the neutral fluorine atom, which has the electron configuration 1s2 2s2 2p5. F^3+ has the electron configuration 1s2 2s2 2p6, which is the same as the noble gas neon. Therefore, F^3+ has the same electron configuration as a noble gas.

So, the correct answer is: b) Na^2+, d) O^2-, and e) F^3+ all have the same electron configuration as a noble gas.

The memorial Hermann sugar land is hospital that contains the 179 bed, the full - service that acute the care facility that will brings it together the ultimate in the healthcare technology.

The Memorial Hermann Sugar Land is the Hospital that is the healthcare facility that is located in the Sugar Land, Texas. The number of the beds at the Memorial Hermann Sugar Land Hospital that can change and it is based on various factors such as the patient needs, the facility will updates, and the government regulations.

The Memorial Hermann name was first introduced on the November 4, 1997 after the name of the Hermann Healthcare System and the Memorial Healthcare System that is completed their merger and becoming the largest non profit health care system.

To learn more about memorial Hermann here

https://brainly.com/question/30399636

#SPJ4

Answer:

Because of the Strong force

The change in free energy in a reaction represents the amount of the energy released in the conversion of the reactants to the products under the standard conditions.

The free energy change is defined as the the amount of the energy released in the conversion of the reactants to the products under the standard conditions.

The difference in between the heat released during the process and the heat that is released for the same process that occurs in the irreversible manner is called  as the change in the free energy (ΔG). The ΔG = 0 denotes that the system is in the equilibrium.

To learn more about free energy here

https://brainly.com/question/15319033

#SPJ4

The  kind of landform  which are created at divergent plate boundaries are rift valleys and mid-oceanic ridges.

A landform is a natural or anthropogenic land feature on the solid surface of the Earth or other planetary body. Landforms together make up a given terrain, and their arrangement in the landscape is known as topography. Landforms include hills, mountains, canyons, and valleys, as well as shoreline features such as bays, peninsulas, and seas, including submerged features such as mid-ocean ridges, volcanoes, and the great ocean basins.

Landforms are categorized by characteristic physical attributes such as elevation, slope, orientation, stratification, rock exposure, and soil type. Gross physical features or landforms include intuitive elements such as berms, mounds, hills, ridges, cliffs, valleys, rivers, peninsulas, volcanoes, and numerous other structural and size-scaled (e.g. ponds vs. lakes, hills vs. mountains) elements including various kinds of inland and oceanic waterbodies and sub-surface features.

Learn more about landforms,here:

https://brainly.com/question/880719

#SPJ9

To balance a chemical equation, we want to make sure that the number of atoms of each element is equal on both sides of the equation. Here's the balanced form of each of the chemical equations you provided:

C6H12O6 + 6O2 -> 6H2O + 6CO2

Ba + 2H2O -> Ba(OH)2 + H2

2K + 2H2O -> 2KOH + H2

2Al(OH)3 -> Al2O3 + 3H2O

Here are the fertilizers arranged in decreasing order of mass percentage of nitrogen:

Note that H₂ is not a fertilizer and was not included in the list.

Promoting plant growth: Nitrogen is an essential nutrient for plant growth, and fertilizers with nitrogen can help plants grow faster and stronger.

Enhancing leaf and stem growth: Nitrogen is a key component of chlorophyll, which is necessary for photosynthesis. Fertilizers with nitrogen can help plants produce more chlorophyll, which in turn can lead to greater leaf and stem growth.

Overall, fertilizers with nitrogen can be an important tool for promoting healthy plant growth and maximizing crop yields.

Learn more on nitrogen fertilizers here: https://brainly.com/question/11199784

#SPJ1

According to the given statement Less carbon was absorbed by the biosphere than the hydrosphere.

Impure carbon is used in the smelting of metals in the form of coal- and wood-based coke and charcoal. Particularly for the production of steel, it is essential. Electric motor brushes, furnace linings, and pencils all use graphite. Processes for filtration and purification use activated charcoal.

Without carbon, life on earth wouldn't be conceivable. This is partly because carbon can easily make bonds with other atoms, allowing biomolecules like DNA and RNA, which are crucial for the development and replication that characterize life, to take on a variety of shapes and functions.

To know more about carbon visit:

https://brainly.com/question/22530423

#SPJ1

Answer:

Ionic Bonds

Explanation:

Ionic bonds form between two or more atoms by the transfer of one or more electrons between atoms. Electron transfer produces negative ions called anions and positive ions called cations

F₂ is a non-polar molecule because the F-F bond is nonpolar in nature.

Electronegativity is the tendency of an element to attract the shared pair of electron towards itself in a covalent compounds or molecules.

When F-F bond is formed then due to same electronegativity of both atoms electron pair remain in the mid of two F atoms, there is no separation of charge and therefore no polarity that is bond become polar.

The molecule F₂ is considered as a nonpolar molecule as it consists of 2 F atoms which concludes that there is zero electronegativity difference.

Hence, option B is correct.

Learn more about electronegativity from the link given below.

https://brainly.com/question/17762711

#SPJ4

The boiling point of methanol is approximately 64.7 degrees Celsius (148.5 degrees Fahrenheit) at standard atmospheric pressure (1 atmosphere or 760 mmHg).

Methanol, also known as methyl alcohol, is a colorless, flammable liquid that is commonly used as a solvent, fuel, and antifreeze. The boiling point of methanol is relatively low at approximately 64.7 degrees Celsius (148.5 degrees Fahrenheit), which means that it can easily evaporate at room temperature.

Methanol is also highly soluble in water, with a solubility of approximately 170 grams per liter at room temperature. In addition to its low boiling point and high solubility, methanol is also highly flammable and toxic, and can cause severe health problems if ingested or inhaled.

Despite these risks, methanol has a wide range of applications in industry, including as a feedstock for the production of formaldehyde and other chemicals, as well as a fuel for internal combustion engines. Overall, the unique physical and chemical properties of methanol make it a versatile and valuable industrial chemical, but also one that requires careful handling and use to avoid safety risks.

To know more about the melting and boiling points of methanol,

https://brainly.com/question/14585835

#SPJ4

The most significant factor in determining the strength of dipole-dipole interactions is the magnitude of the dipole moment of the molecules involved.

The dipole moment is a measure of the separation of charge in a molecule, and it is determined by the difference in electronegativity between the atoms in the molecule and the geometry of the molecule. Molecules with large dipole moments will experience stronger dipole-dipole interactions than molecules with small dipole moments.

Other factors that can affect the strength of dipole interactions include the shape and size of the molecules, the orientation of the dipoles, and the strength of other intermolecular forces present in the system.

To know more about dipole interactions here

https://brainly.com/question/7545068

#SPJ4

The change in allele frequencies in a population brought on by chance is known as genetic drift. A neutral allele's ability to become extinct or rise in prevalence to fixation could depend on chance in a small population.

A population's allele frequencies can shift from generations to generations owing to random events, which is known as genetic drift. In more precise terms, genetic drift is a change that results from "sampling error" while choosing the alleles for such following generation first from gene of both the current generation.

Genetic drift, or "sampling error," is the term used to describe changes in allelic brought on by random events. Any population that is not infinite in size can experience drift, but small populations are more vulnerable to it.

To know more about allele frequencies visit:

https://brainly.com/question/14619299

#SPJ4

Multivalent ions are located in the right hand side of periodic table in a zig-zag order.

Multivalent ions are defined as the elements with more than one stable ion. Generally, Ionic compounds containing multivalent elements must have Roman numerals in their names in order to indicate which ions is forming that compound. Basically, the roman numeral is written in brackets after the element to indicate the charge

The Five Multivalent Metals present in the modern periodic table are copper. Cu 1+ copper(I) Cu 2+ copper(II) iron. Fe 2+ iron(II) Fe 3+ iron(III) mercury. Hg2 2+ mercury(I) Hg 2+ mercury(II) lead. Pb 2+ lead(II) Pb 4+ lead(IV) tin. Sn 2+ tin(II) sn 4+ tin(IV).

Learn more about multivalent ions from the link given below.

https://brainly.com/question/30274291

#SPJ4

Answer:

Yes, that is correct. When 1-bromobutane is heated with a strong base like potassium tert-butoxide, it undergoes dehydrohalogenation via an E2 (elimination bimolecular) mechanism, in which the bromine atom is removed from the molecule along with a proton from a neighboring carbon atom. This results in the formation of an alkene (butene) and a molecule of hydrogen bromide. The reaction follows second-order kinetics because it involves two species (1-bromobutane and the base) in the rate-determining step.

Explanation:

Answer:

The calculated solution density is lower than the actual density.

Explanation:

If the student spilled some of the solutions before measuring the mass, the calculated mass of the solution will be lower than the actual mass of the solution. This means that the calculated density of the solution will be higher than the actual density of the solution since the calculated density is the mass of the solution divided by the measured volume of the solution. In other words, the calculated density will be overestimated due to the lower measured mass of the spilled solution, leading to a potential error in the density measurement.

Assuming that the spilled solution was of the same density as the remaining solution, the effect of spilling some of the solutions before measuring the mass would be that the calculated solution density would be lower than the actual density. This is because the calculated density is based on the measured mass and the remaining volume, which is now smaller than the actual volume due to the spilled solution. As a result, the calculated density would be lower than the actual density.

The concept Le Chatelier's principle is used here to determine the increase in the concentration of Cl₂. Here on adding more amount of O₂, the amount of Cl₂ can be increased.

If a system in equilibrium is subjected to a change in concentration, pressure or temperature, the equilibrium shifts in the direction which tends to reduce the effect of the change. This is called the Le Chatelier's principle.

In chemical equilibrium, if the concentration of any one of the reacting species is increased, the equilibrium will shift in the forward direction and more products will be formed.

Thus here on adding O₂, the amount of Cl₂ produced will be more.

To know more about Le Chatelier's principle, visit;

https://brainly.com/question/18850227

#SPJ1

Answer:decrease the volume of the container

Explanation:Acellus confirmed