The force exerted on the top of the bottle is given by the impulse-momentum theorem, which states that the impulse (change in momentum) of an object is equal to the force applied to the object multiplied by the time over which the force is applied.
F = (m * vi) / t = (0.480 kg * 5.00 m/s) / 1.20×10-4 s = 4.00x104 N
The force exerted on the bottom of the bottle is equal to the pressure (P) multiplied by the area (A) of the bottom of the bottle.
A = (Pi/4) * (Dbot^2) = (Pi/4) * (6.50 cm)^2 = 90.79 cm^2
F = P * A = 70.0 MPa * 90.79 cm^2 = 6.36x10^5 N
How to calculate force in physics?In physics, force is calculated using the formula: force = mass x acceleration (F = ma). The unit of force is typically the Newton (N). To calculate force, you need to know the mass of the object and the acceleration it is experiencing. Once you have that information, you can substitute it into the formula and solve for force.
Learn more about force in brainly.com/question/29044739
#SPJ1
A 1. 5-mole sample of an ideal gas is gently cooled at constant temperature 320 K. It contracts
from initial volume 19 L to final volume V2. A total of 1. 2 kJ of heat is removed from the gas during the contraction process. What is V2? Let the ideal-gas constant R = 8. 314 J/(mol. K).
A mole sample of an ideal gas is gently cooled at constant temperature 320 K.
What happens when gas is cooled at constant temperature?Since the internal energy of an ideal gas is proportional to temperature, it does not change when the temperature is held constant. The first law, which governs changes in internal energy, changes to 0 = Q - W, resulting in Q = W. Both the temperature and the volume of the gas decrease as it cools at a constant pressure. The fundamental behaviour of fluids with respect to volume, pressure, and temperature is described by Boyle's, Charles', and Gay Lussac's Laws. When heat is applied at constant pressure, some of it is utilised to cause gas to expand while the remainder is used to raise the gas' temperature, which increases the gas' internal energy.To learn more about constant temperature refer to:
https://brainly.com/question/21505356
#SPJ4
A simple pendulum has length L and period T. As it passes through its equilibrium position, the string is suddenly clamped at its mid-point. The period then becomes:
The new period would be T/2.
The period of a simple pendulum is given by T = 2π √(L/g), where,
L is the length of the pendulum g is the acceleration due to gravity.When the string is clamped at its midpoint, the length of the pendulum is effectively halved.
So the new period would be T' = 2π √(L/2g) =π √(L/g) = T/2.
Period of Simple Pendulum:
The period of a simple pendulum is the time it takes for the pendulum to complete one full oscillation, or swing back and forth. It is determined by the length of the pendulum (L) and the acceleration due to gravity (g). The mathematical formula for the period of a simple pendulum is T = 2π √(L/g).The length L of the pendulum is the distance from the pivot point (the point at which the pendulum is attached) to the center of mass of the pendulum bob (the weight at the bottom of the pendulum). The longer the pendulum, the longer the period will be.The acceleration due to gravity (g) is a constant value of approximately 9.8 m/s^2 on the surface of the Earth. The value of g is used in the formula because the force of gravity is what causes the pendulum to oscillate.It's important to note that the period of a simple pendulum is independent of the amplitude of the oscillations (the angle at the pendulum is displaced from its equilibrium position), as long as the amplitude is small enough that the pendulum's motion can be considered simple harmonic motion.Learn more about Simple Pendulum here;
https://brainly.com/question/26449711
#SPJ4
A toy car move around a loop-the-loop track. The loop i 0. 5 high. What i the minimum peed of the car at the top of the loop for it to tay on track?
Pleae work it!!
I found all the anwer are 1. 57m/ but it i
0. 78m/
The minimum speed of the car at the top of the loop for it to stay on track be 1.57 m/s.
What is speed?The speed of an item, which is a scalar quantity in everyday usage and kinematics, is the size of the change in that object's position over time or the size of the change in that object's position per unit of time.The speed at which an object's location changes in any direction.The distance traveled in relation to the time it took to travel that distance is how speed is defined.As a result, the fundamental unit of time and the basic unit of distance are combined to form the SI unit of speed. Thus, the metre per second (m/s) is the SI unit of speed.To learn more about speed refer to:
https://brainly.com/question/13943409
#SPJ4
1. A Major League pitcher can give a 0. 142-kg base-
ball a speed of 45. 1 m/s. Find the magnitude of the
baseball's momentum.
The baseball's momentum will be 2.75 m/s in magnitude. This is the accurate answer to the given problem.
What are velocity and momentum?Momentum and velocity are different in that momentum is a measurement of an object's amount of motion, whereas velocity is a measurement of an object's speed with direction. Velocity is one of the components of momentum since momentum is equal to an object's mass multiplied by its speed.
Is speed the same as momentum?p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.
Briefing:P initial = (145g) x (45 m/s) = 6525 g*m/s
F = 0-6525/1.0s = -6525N
To learn more about momentum visit:
brainly.com/question/24030570
#SPJ4
A myopic person sees that her eyeglasses perscription is -4.00 D, for eyeglasses positioned 1.75 cm from her eyes. What is her far point?
After solving the problem the person's far point is 25 cm
What is myopic person?
A myopic person is someone who is near sighted and is unable to clearly see objects that are far away. This is caused by the eyeball being too long and the cornea having too much curvature. Light entering the eye is focused in front of the retina rather than directly on it, resulting in blurred vision for distant objects. Myopia is a common eye condition and can usually be corrected with glasses or contact lenses. In more severe cases, laser surgery may be necessary. People with myopia may need to wear their glasses or contact lenses all the time in order to see clearly, but they may be able to take them off when they are close to something they want to see clearly.
The far point is the farthest distance at which a person can see clearly without any corrective lenses.
The formula for calculating far point is 1/f = 1/d + 1/p, where f is the far point, d is the distance from the eye to the lens (1.75 cm in this case), and p is the power of the lens (in diopters) which is -4.00 D.
Plugging the values into the formula yields 1/f = 1/1.75 + 1/-4.00, which simplifies to 1/f = 4.00 - 0.5714. Solving for f gives f = 0.2500, or 25 cm.
Therefore, the person's far point is 25 cm.
To learn more about myopic person
https://brainly.com/question/13257948
#SPJ4
Why is 90-degree angle important?
90-degree angles are used as reference points for measuring other angles and for defining trigonometric functions and vector relationships.
In trigonometry, the sine, cosine, and tangent functions are defined in terms of the ratios of the sides of a right triangle, where one angle is 90 degrees. In addition, in vector calculus, the dot product and cross product of two vectors are often defined in terms of the angle between the vectors, and a 90-degree angle represents a perpendicular or orthogonal relationship between the vectors. The 90-degree angle is also important in mechanics and engineering as it is used to define the concept of torque, which is the rotational equivalent of linear force. Torque is defined as the product of a force and the perpendicular distance from the line of action of the force to the axis of rotation. Furthermore, it is also used to define the concepts of stress, strain and moment of inertia in strength of materials and mechanics.
Learn more about the trigonometric functions here:
https://brainly.com/question/6904750#
#SPJ4
A lighthouse that rises 49 feet above the surface of the water sits on a rocky cliff that extends 19 feet from the base. A sailor on the deck of a ship sights the top of the lighthouse at an angle of 30.0 degrees about the horizontal.
If the sailor’s eye level is 14 feet above the water, how far is the ship from the rocks?
If the sailor’s eye level is 14 feet above the water, So the ship from the rocks is 41.62 feet far from the sailor.
The main concepts required to solve this problem are the trigonometric properties and the distance. Later, use the tangent function and substitute the values. Finally, rearrange the tangent equation to calculate the distance of the ship from the rocks.
tan30.0°=35ft./19ft.+x
1/√3=35ft./19ft.+x
x=(35ft.) ([Equation]3)-19ft.
=41.62ft.
A tangent equation is an equation that describes a line that touches a given curve at a single point. It is usually expressed in the form y=mx+b, where m is the slope of the line and b is the y-intercept. To find the equation of a tangent, one must calculate the slope of the line at the point of tangency. This can be done by taking the derivative of the equation of the curve at that point.
The derivative will be the slope of the tangent, so this can be substituted into the tangent equation. The y-intercept can be found by plugging the x-coordinate of the point of tangency into the equation of the curve and solving for y. This will give you the y-intercept of the tangent equation. Through this process, one can find the equation of a tangent to any given curve.
To learn more about Tangent equations visit here:
brainly.com/question/29180943
#SPJ4
The spring in a scale stretches 1 centimeter when a 5-newton object hangs from it. How much does an object weigh if it stretches the spring 2 centimeters
The spring in a scale stretches 1 centimetres when a 5 newton object hangs from it. The required weight of an object is 10 N if it stretches the spring 2 centimetres.
Hooke's law tells us that, F = -kx
where, k is the spring constant
x is the distance stretched by a spring
F is the force
Given that,
Length x₁ = 1 cm
Force F₁ = 5 N
Length x₂ = 2 cm
F₂ = ?
From the above equation, we can write,
F₁/x₁ = F₂/x₂
Making F₂ as subject, we have,
F₂ = F₁/x₁ × x₂ = 5/1 × 2 = 10 N
Thus, the required weight of an object is 10 N if it stretches the spring 2 centimetres.
To know more about spring:
https://brainly.com/question/27885830
#SPJ4
What is the total distance the particle travels from t 0 to t 4?
the whole distance is five. The main point is that you must be aware of if and when the particle reverses course.
In order to determine the velocity, differentiate the displacement and set it to zero.
It is obvious that at t=1, the velocity is zero.
S=3 is the starting location at time t=0. At t=1,s=2 \s.
The total distance traveled is 1.
The additional distance traveled is 62=4 at time t=3 and s=6.
Thus, the whole distance is five.
L=30|s′(t)|dt=30|2t2|dt=1022tdt+312t2dt=5 is the length of the image of s|[0,3] and represents the total distance traveled between t=0 and t=3. .
When calculating the traveled distance of a particle satisfying the law of motion s(t) between t=a and t=b, another method that can be used if you are unfamiliar with the arc length formula is to first determine the critical points in (a,b), such as t1tk, and then multiply those values by the following formula: |s(t1)s(a)|+|s(t2)s(t0)|++|s(b) Since there is just one critical moment in your particular scenario, t=1, L=|s(1)s(0)|+|s(3)s(1)|=1+4.
To learn more about particle please click on below link
https://brainly.com/question/2288334
#SPJ4
What is the process called when the ice reaches the coast breaks off to form icebergs that are then carried out to sea?
The process of breaking of ice from the edge of the glaciers and then carried out to sea is known as calving.
Calving of glaciers is usually accompanied by a loud cracking sound or booming sound.
A huge glacier or polar ice that has broken off and floated into the sea is what creates an iceberg. The iceberg is composed of fresh water, just like the glaciers or ice in the North Pole. Since freshwater is less thick than salty seawater, icebergs float in the water.
When a rift develops in a glacier's margin as a result of ice melting, wind or water erosion, or other factors that make the glacier unstable, the calving process begins. A block eventually separates from the land, forming an iceberg that crashes into the water.
To know more about icebergs:
https://brainly.com/question/11430987
#SPJ4
Les mélange et le transformations de la matiers
Les molécules sont arrangées autrement, ce qui modifie l'aspect ou l'état de l'espèce chimique. Un mélange est une substance composée de plusieurs espèces chimiques qui ne réagissent pas ensemble, au contraire de la transformation chimique. Il s'agit donc d'une transformation physique, qui ne change pas la matière.
When charging by induction using grounding, if a negative rod is used, the object will acquire a ______ charge
When a positively charged rod becomes grounded it becomes neutral. The electrons come from the ground to your hand, then from your hand to the rod making the rod become neutral.
What is happening when a negatively charged rod becomes grounded?Both of the charged objects receive the same kind of charge when charging through conduction. Both things acquire a negative charge when a negative object is used to charge a neutral object.
The neutral sphere needs electrons from the negatively charged rod in order to become negative. 3. To demonstrate how charging by contact works, we'll first look at the scenario of charging a neutral needle electroscope with a negatively charged metal spherical.
Understanding the process necessitates an understanding of how like charges resist one another and have a strong desire to spread out as widely as possible in order to lessen their repulsions. The extra electrons in a negatively charged metal sphere repel one another and move as far apart from one another as possible.
To learn more about negative rod refer to:
https://brainly.com/question/28005383
#SPJ1
When charging by induction using grounding, if a negative rod is used, the object will acquire a positive charge.
What is charging by induction?A charging technique called induction charging involves charging a thing without actually contacting it to another charged object. The charged particle is held close to an uncharged substance which is conductive also, that is grounded on a neutrally charged material during the charging by induction process.This method of charging involves using a charged object to help a neutral object become charged without actually touching the objects. The neutral or uncharged conductor, which is grounded on a neutrally charged substance, is brought closer to the charged particle. If a charge is transferred between two objects, an oppositely polarized charge will emerge in the uncharged conducting material.
To know more about induction visit
https://brainly.com/question/10254645
#SPJ1
Determine the missing forces A-H
The missing forces in the diagram given are: A = 50 N; B = 200 N; C = 1100 N; D = 20 N; E = 300 N; F = 0 N; G = 50 N and H = 0 N.
What is resultant force?In physics and engineering, a resultant force is a single force and associated torque obtained by combining a system of forces and torques acting on a rigid body by vector addition. The characteristic of a resultant force or force-torque is that it has the same effect on a rigid body as the original force system. The resulting forces on the body are calculated and visualized by computational analysis or (for sufficiently simple systems) by free-body diagrams.
For A and B:
Since net force is zero the applied forces in all four direction will be equal but opposite.
So A will be 50 N and B will be 200 N.
For C:
The net force is 900 N;
C = 900 + 200
C = 1100 N
For D and E:
The net force is 60 N left; this means the net upward or downward force acting on the object is zero.
So E = 300 N
D = 80 - 60
D = 20 N
For F, G and H:
The net force is 30 N right; this means the net upward or downward force acting on the object is zero.
So F and H will be zero.
G = 20 + 30
G = 50 N
To know more about force, visit:
https://brainly.com/question/28875770
#SPJ1
A magnetic field of magnitude 0.37 T0.37 T is directed vertically upward.
(a) Find the magnetic flux through a flat surface of area 19 cm219 cm2 if the surface is vertical.
(b) Find the magnetic flux through a flat surface of area 19 cm219 cm2 if the surface is horizontal.
(c) Find the magnetic flux through a flat surface of area 19 cm219 cm2 if the surface is at angle of 64∘64∘ with the horizontal.
The equation represents the force on a wire in a magnetic field (B) that is length L and carrying current I. where θ is the angle created by the magnetic field and the wire, and F=ILBsin.
What is magnetic flux, exactly?The number of total of magnetic field line that travel through a specific closed surface is known as the magnetic flux. It provides a method to calculate the overall magnetic field which passes across a particular surface area.
What is the magnetic flux unit?Magnetic flux is measured in SI units by the Weber (Wb). Tesla is equal to one Weber per sq meter of flux density (T). Numerous additional units are routinely used to express the Weber unit.
To know more about magnetic flux visit:-
https://brainly.com/question/13851713
#SPJ4
If you have a set of holiday lights that is on a series circuit, predict what would happen if the series circuit were cut off in the middle. Infer how this would differ from what would happen with a parallel circuit.
If the series circuit that powers your holiday lights were to be severed in the middle. The lights would all stop functioning. Only one light would stop working if the lights were linked in parallel circuit.
A series circuit is a straightforward circuit that enables electrons to go between one or more resistors. A resistor is anything that drains energy from a cell (battery). The resistor in a series circuit is typically a lightbulb. A series circuit is one in which the entire current flows through each element. A series circuit is a straightforward circuit that enables electrons to go between one or more resistors.
Learn more about series circuit here
https://brainly.com/question/11409042
#SPJ4
An error that occurs consistently in one direction, such as a scale that weighs everyone two pounds more than their true weight, is known as a:
A systematic error is one that constantly occurs in one direction, for as when a scale consistently overestimates everyone's weight by two pounds.
If an error changes in the same direction throughout time, it is said to be systematic. For instance, if something always or frequently caused the blood pressure to increase right before the measurements were to be taken, this could occur when taking blood pressure.One measurement may slightly differ from the next due to random error. It results from unanticipated changes that occur throughout an experiment. When a reading is taken consistently each time, systematic error always impacts measurements in exactly the same way or to exactly the same degree. It is foreseeable.To know more about error here
https://brainly.com/question/28008941
#SPJ4
humans taste food mostly because of:
Answer:
taste buds
Explanation:
very sensitive microscopic hairs called microvilli. The tiny hairs send messages to the brain about how something tastes, so you know if it's sweet, sour, bitter, or salty
To ensure your battery's longevity, you should keep the area where cables are connected to the positive and negative poles clean. T/F
True. Keeping the terminals and cable connections clean helps to ensure a good electrical connection, which can prolong the life of the battery.
Keeping the terminals and cable connections of a battery clean is important for prolonging the battery's life. Dirt, corrosion, or other buildup on the terminals can create resistance in the circuit, which can lead to overheating and damage to the battery. This can cause the battery to charge and discharge less efficiently, reducing its overall capacity and lifespan. To clean the terminals, you can use a wire brush or a toothbrush with baking soda and water to scrub away any corrosion. Then, dry the terminals and cables thoroughly before reconnecting them to the battery. This will ensure a good electrical connection and a longer-lasting battery.
To know more about battery click below:
https://brainly.com/question/19225854#
#SPJ4
A 2.5 kg block is initially at rest on a horizontal surface. A horizontal force of magnitude 6.0 N and a vertical force are then applied to the block (Fig. 6-17). The coefficients of friction for the block and surface are ms 0.40 and mk 0.25. Determine the magnitude of the frictional force acting on the block if the magnitude of is (a) 8.0 N, (b) 10 N, and (c) 12 N.
Kinetic friction force, or f k = k F N = 3.1N, is the amount of frictional force acting on the block.
Static friction is the friction that exists between two systems when they are in contact and immobile with respect to one another. Kinetic friction is the term for the resistance that exists between two systems while they are in contact and moving in relation to one another.
Calculation:Either static or kinetic friction We decide on +x right and +y up. Applying Newton's second law to these axes:
F−f=ma
P+F n −mg=0
where F=6.0 N and m=2.5 kg is the mass of the block.
(a) P=8.0 N in this scenario results inF N =(2.5kg)(9.8m/s 2 )–10N=14.5N.
This implies ,fs, max =μ s F N=6.6N, which is larger than the 6.0N rightward force. The block, which was previously at rest, stays in place as a result.
Putting a = 0
f=P=6.0 N is the static friction force that results from plugging the first of our equations above.
(b) With P=10 N in this instance, the normal force isThis suggests that, fs, max = s F N =5.8N, which is smaller than the 6.0 N rightward
force, which causes the block to move. Therefore, we are working with kinetic data instead of static data.
Eq. reveals that friction is f k = k F N =3.6 N.
(c) In the last scenario, P=12 N results in FN=12.5 N and fs, max = s F N = 5.0N.which (as expected) is less than the 6.0 N rightward force. Thus, the block moves. The kinetic friction force, then, is f k =μ k F N =3.1N.
To know more about Kinetic friction visit:-
https://brainly.com/question/17237604
#SPJ4