To calculate the mass of 4.50 moles of chlorine gas, Cl2, we need to use the molar mass of Cl2, which is 70.90 g/mol.
Mass = moles x molar mass, Mass = 4.50 mol x 70.90 g/mol, Mass = 319 g. Therefore, the answer is E) 319 g.
To calculate the mass of 4.50 moles of chlorine gas (Cl2), you must use the molar mass of Cl2. The molar mass of an element or compound is the mass of one mole of that substance.
Step 1: Find the molar mass of Cl2.
The molar mass of Cl (chlorine) is 35.45 g/mol. Since Cl2 has two chlorine atoms, the molar mass of Cl2 is 2 × 35.45 g/mol = 70.90 g/mol.
Step 2: Calculate the mass of 4.50 moles of Cl2.
To do this, multiply the moles of Cl2 by the molar mass of Cl2.
Mass = Moles × Molar mass
Mass = 4.50 moles × 70.90 g/mol = 319 g
The mass of 4.50 moles of chlorine gas (Cl2) is 319 g, so the correct answer is E) 319 g.
to learn more about compounds click here:
brainly.com/question/13910583
#SPJ11
Georgia's Coastal Plains region includes about 60% of the state. Long ago this area was part of the Atlantic Ocean and completely covered by
water. An important feature of Georgia's coast is the salt marsh. Georgia's salt marshes play a unique role in maintaining the delicate balance of
nature so vital along our coastal estuaries.
In 1970, the State of Georgia established the Coastal Marshlands Protection Act to protect the marsh and estuarine areas, and to regulate the
activities within these public trust lands that is held for the citizens of Georgia.
Georgia's salt marshes have been identified as one of the most extensive and productive marshland systems in the United States. It is production
almost beyond comprehension, producing nearly twenty tons to the acre; four times more productive than the most carefully cultivated corn. This is
so very important for ALL BUT ONE of the reasons listed. That is:
The fires keep the Carolina Bay habitat from becoming overgrown with vegetation.
What is the exception?Peat is an organic material consisting of leftover parts after plant breakdown. This substance has a brown color that can be either light or dark depending on the variation and is especially rich in charcoal.
It serves as a substrate and is primarily used in gardening, but it is also useful in natural settings because it promotes soil preservation, the supply of organic matter, increased water porosity, and improved soil retention.
The removal of this excess peat is what explains the advantage of natural fires occurring in the Carolina Bay habitat, the advantage is that fires prevent the Carolina Bay habitat from being overgrown.
Learn more about Coastal Marshland:https://brainly.com/question/17573035
#SPJ1
Which one of the following is an example of a balanced chemical reaction?A) C3H6O + 4O2 ® 3CO2 + 3H2O D) 2C3H6O + 9O2 ® 6CO2 + 3H2OB) 2C3H6O + 9O2 ® 6CO2 + 6H2O E) C3H6O + 9O2 ® 3CO2 + 3H2OC) C3H6O + 3O2 ® 3CO2 + 3H2O
The balanced chemical reaction is option B) 2C3H6O + 9O2 ® 6CO2 + 6H2O.
A balanced chemical reaction means that the number of atoms of each element is equal on both sides of the equation. In this reaction, there are 6 carbon atoms, 12 hydrogen atoms, and 18 oxygen atoms on both sides of the equation.
A balanced chemical reaction is one in which the number of atoms for each element is equal on both the reactant and product sides of the equation. From the options provided, the balanced chemical reaction is:
B) 2C3H6O + 9O2 → 6CO2 + 6H2O
Learn more about chemical reaction here: brainly.com/question/29762834
#SPJ11
When comparing friction loss in water pipes, a larger Hazen-Williams C-factor value indicates the pipe is?
a) More durable
b) Able to withstand a higher pressure
c) Smoother inside
d) Rougher inside
The Hazen-Williams C-factor value is a measure of the smoothness inside a pipe. A higher C-factor indicates that the pipe has less friction loss, meaning that water can flow more easily and smoothly through it.
This does not necessarily indicate that the pipe is more durable or able to withstand higher pressure.
When comparing friction loss in water pipes, a larger Hazen-Williams C-factor value indicates the pipe is:
Hazen-Williams coefficient, abbreviated as C, also called Hazen-Williams friction coefficient, a dimensionless number, is used in the Hazen-Williams Equation. The lower the coefficient, the smoother the pipe is. The higher the coefficient, the less fluid flow is restricted
To know more about Measure click here .
brainly.com/question/4725561
#SPJ11
Although diverse, the ligands tend to be mainly hydrophobic with anionic or electronegative features, and many commonly used pharmaceuticals fall within this category. Sites I and II are most likely lined with the side chains of which amino acids?a. R and LB.E and YC.D and ED.D and H
Considering the below information, option B (E and Y) seems to be the most likely choice, as Glutamic acid has anionic properties, and Tyrosine has a slightly hydrophobic side chain.
It appears that the sites I and II are lined with amino acids that have hydrophobic side chains and may have anionic or electronegative properties. Let's analyze the given options:
a. R (Arginine) and L (Leucine): Arginine is polar and positively charged, while Leucine is hydrophobic. This pair doesn't fully match the description.
b. E (Glutamic acid) and Y (Tyrosine): Glutamic acid is polar and negatively charged (anionic), while Tyrosine is polar and slightly hydrophobic. This pair is a potential match.
c. D (Aspartic acid) and E (Glutamic acid): Both are polar and negatively charged (anionic), but neither is hydrophobic.
d. D (Aspartic acid) and H (Histidine): Aspartic acid is polar and negatively charged, while Histidine is polar and positively charged. This pair doesn't match the description.
learn more about Glutamic acid Refer: https://brainly.com/question/29807201
#SPJ11
Question 86
The hydro pneumatic tank typically contains_____ of its volume as water.
a. 50 percent
b. 80 percent
c. 20 percent
d. Does not contain water only compressed air
The hydro pneumatic tank typically contains b. 80 percent of its volume as water.
A hydro pneumatic tank is used to store water under pressure, and typically, 80 percent of its volume is filled with water. The remaining 20 percent is filled with compressed air, which helps to maintain the pressure in the tank. When the water is pumped into the tank, it compresses the air, which then acts as a cushion to maintain a constant pressure even when the water is being drawn out of the tank.
This is commonly used in water supply systems to maintain a consistent water pressure throughout the network. In addition, it can also be used in heating and cooling systems to store and circulate water. The hydro pneumatic tank is an essential component of many water systems and plays a vital role in ensuring a reliable water supply. The hydro pneumatic tank typically contains b. 80 percent of its volume as water.
learn more about water supply here:
https://brainly.com/question/29757563
#SPJ11
In the acid-base reaction H3O+ + OH- → 2H2O, the H3O+ ion transfers a(n)______ to the OH- ion.
In the acid-base reaction H3O+ + OH- → 2H2O, the H3O+ ion transfers a proton (H+). This is a classic example of a neutralization reaction where the acidic H3O+ ion and the basic OH- ion combine to form water (H2O) molecules. The transfer of a proton from the H3O+ ion to the OH- ion results in the formation of two water molecules, which are neutral in nature.
1. H3O+ (hydronium ion) acts as an acid, while OH- (hydroxide ion) acts as a base.
2. The acid (H3O+) donates a proton (H+) to the base (OH-).
3. OH- accepts the proton (H+) and forms a water molecule (H2O).
4. The reaction results in the formation of 2 water molecules, as shown in the balanced equation: H3O+ + OH- → 2H2O.
To know more about neutralization reaction:
https://brainly.com/question/28970253
#SPJ11
6.4. The principal disadvantage of aluminum door and window sections is their A. high initial expense.
B. lack of durability. C. poor resistance to galvanic action.
D. poor resistance to building stresses.
The principal disadvantage of aluminium door and window sections is their poor resistance to galvanic action, which can lead to corrosion over time.
While aluminium is a lightweight and affordable material, it may not be the most durable option for areas with high moisture or salt exposure. However, proper maintenance and coatings can help improve its longevity. Galvanic action occurs when two dissimilar metals come into contact with each other in the presence of an electrolyte, such as moisture. Aluminum is a highly reactive metal and when it comes into contact with other metals, such as steel, it can cause galvanic corrosion to occur. This can lead to the deterioration of the aluminium over time and reduce its lifespan. To mitigate this issue, manufacturers may use galvanic coatings or isolating materials to separate aluminium from other metals.
To learn more about aluminium, refer:-
https://brainly.com/question/25869623
#SPJ11
You must know what happens if you silica for very nonpolar compounds and if you use alumina for very polar compounds
In the context of chromatography, silica and alumina are commonly used as stationary phases for the separation of compounds.
If you use silica for very nonpolar compounds, they will interact weakly with the polar silica surface, resulting in rapid elution and poor separation. On the other hand, using alumina for very polar compounds will lead to strong interactions between the polar compounds and the polar alumina surface, causing slow elution and potential co-elution of similar compounds, which can also result in poor separation. To achieve optimal separation, it's essential to match the polarity of the stationary phase with the polarity of the compounds being separated.
Learn more about the stationary phase at https://brainly.com/question/29835994
#SPJ11
Question 65
Concentrations of less than __ pollen grains/m3 of air in a 24-hour period usually do not produce allergic reactions
a. 25
b. 33
c. 100
d. 1000
The concentration of pollen in the air can have a significant impact on individuals with allergies. Pollen counts are typically measured in the number of pollen grains per cubic meter of air (pollen grains/m3). The concentration at which allergic reactions occur can vary depending on the individual's sensitivity, the type of pollen, and other environmental factors.
According to the American Academy of Allergy, Asthma, and Immunology (AAAAI), concentrations of less than 100 pollen grains/m3 of air in a 24-hour period usually do not produce allergic reactions in most individuals. However, for highly sensitive individuals, even lower concentrations may trigger symptoms.
It's important to note that pollen counts can vary widely depending on the time of day, weather conditions, and other factors. Pollen counts are often highest in the early morning and on warm, dry, and windy days. It's recommended that individuals with allergies monitor pollen counts and take precautions, such as staying indoors during peak pollen hours or wearing a mask when outdoors, to minimize exposure to pollen.
For such more questions on Allergies:
https://brainly.com/question/29553214
#SPJ11
When 8.00 g Na,S and 21.65 g Cd(NO3)2 are reacted, and 14.25 g sodium nitrate are formed, what is the percent yield?
The percent yield of the reaction is approximately 40.3%.
To calculate the percent yield of a reaction, we need to compare the actual yield to the theoretical yield. The theoretical yield is the maximum amount of product that can be formed based on the stoichiometry of the reaction, while the actual yield is the amount of product actually obtained in the experiment.
First, we need to write the balanced equation for the reaction between Na₂S and Cd(NO₃)₂;
Na₂S + Cd(NO₃)₂ → 2NaNO₃ + CdS
From the balanced equation, we can see that 1 mole of Na₂S reacts with 1 mole of Cd(NO₃)₂ to produce 1 mole of CdS and 2 moles of NaNO₃.
Next, we need to calculate the theoretical yield of NaNO₃ based on the given amounts of reactants;
The number of moles of Na₂S is; 8.00 g / 78.04 g/mol = 0.1026 mol
The number of moles of Cd(NO₃)₂ is: 21.65 g / 236.42 g/mol = 0.0916 mol (since Cd(NO₃)₂ has a 1:1 stoichiometry with Na₂S, it is the limiting reactant)
The theoretical yield of NaNO₃ is; 2 mol NaNO₃ / 1 mol Na₂S × 0.1026 mol Na₂S = 0.2052 mol NaNO₃
We can then calculate the actual yield of NaNO₃ based on the given mass;
The actual yield of NaNO₃ is; 14.25 g
Finally, we can calculate the percent yield;
Percent yield = (actual yield/theoretical yield) × 100%
Percent yield = (14.25 g / (0.2052 mol × 84.99 g/mol)) × 100%
Percent yield = 40.3%
Therefore, the percent yield is 40.3%.
To know more about percent yield here
https://brainly.com/question/12704041
#SPJ1
Which of the following is true regarding oxidation potential?
A
It is electrode potential for oxidation half cell
B
It is electrode potential for reduction half cell
C
It corresponds to positive electrode
D
All of the above
The electrode potential for the oxidation half cell is known as the oxidation potential. As a result, the right answer is A.
The oxidation potential of a substance is described as its tendency to lose electrons, which corresponds to the electrode potential of the oxidation half-cell.
In other words, the potential difference between the electrodes of an oxidation half-cell and the reference electrode measures a substance's proclivity to oxidize. The oxidation potential of an oxidizing substance is related to the standard reduction potential by the equation: E° (reduction) = - E° (oxidation). As a result, option A is right.
Option B and C are erroneous because reduction potential refers to the electrode potential for the reduction half-cell.
To know more about oxidation potential, visit,
https://brainly.com/question/1313684
#SPJ4
Select all the statements that correctly describe trends in atomic radii for ions.A. A cation is smaller than its neutral atom because the protons draw the remaining electrons closer to the nucleus.B. For any series with the same number of electrons (isoelectronic series), as the number of protons increases, the ion size increases.C. An anion is larger than its neutral atom because the protons cannot hold the increased number of electrons as close to the nucleus.
A and C are the correct statements that describe trends in atomic radii for ions.
A cation, which is a positively charged ion, is smaller than its neutral atom because the loss of electrons reduces the electron-electron repulsion, making the remaining electrons closer to the nucleus. On the other hand, an anion, which is a negatively charged ion, is larger than its neutral atom because the increase in electrons leads to greater electron-electron repulsion, which pushes the electrons further away from the nucleus.
Statement B is incorrect because as the number of protons increases, the ion size decreases in an isoelectronic series, as there is a greater positive charge holding the same number of electrons closer to the nucleus.
Find out more about atomic radi
brainly.com/question/30799882
#SPJ11
Most air pollution comes from...
Thermal inversions
Burning fossil fuels
Ozone layer depletion
Volcanic eruptions
The burning of fossil fuels such as coal, oil, and gas releases a variety of pollutants into the air, including carbon dioxide, nitrogen oxides, sulfur dioxide, and particulate matter. The correct answer is 2.
These pollutants contribute to a range of environmental and health problems, including climate change, respiratory illness, and cardiovascular disease. While other factors such as thermal inversions and volcanic eruptions can also contribute to air pollution, they are not as significant as the ongoing combustion of fossil fuels by human activity. Addressing air pollution requires a multi-pronged approach, including transitioning to cleaner sources of energy. Hence option 2 is correct.
To know more about fossil fuels, here
brainly.com/question/3371055
#SPJ1
--The complete Question is, Most air pollution comes from...
Thermal inversionsBurning fossil fuelsOzone layer depletionVolcanic eruptions --which of the following is false? select the correct answer below: a reaction mechanism is the pathway by which a reaction occurs. elementary reactions can often be broken down into simpler steps. elementary reactions occur exactly as written. reactive intermediates are produced in one step and consumed in a subsequent step.
Reactive intermediates may not necessarily be consumed in the following phase and can take part in other reactions to make other products, thus the statement "reactive intermediates are produced in one step.
What is a proper response mechanism?The series of fundamental processes via which a chemical reaction takes place is known as a reaction mechanism. A multistep or complicated reaction is one that involves two or more simple processes. A chemical species that is produced in one fundamental stage of a reaction and destroyed in the next is referred to as an intermediate.
What is a reaction mechanism's fundamental step?A basic set of reactions known as elementary steps or elementary reactions illustrate the progression of a reaction at the molecular level. The series of simple stages that together make up a full chemical reaction is known as a reaction mechanism.
to know more about elementary reactions here;
brainly.com/question/31022212
#SPJ1
PLEASE ANSWER!!!!! 35 POINTS!!
How many moles of P2O3 are required to fully react with 108 H2O? (H2O; 18 g/mol)
P2O3 + 3H2O --> 2H3PO3
108 gH2O ---> mol P2O3
what mass of cu(s) is electroplated by running 16.0 a of current through a cu2 (aq) solution for 4.00 h ?
To solve this problem, we need to use Faraday's law of electrolysis, which states that the mass of a substance deposited on an electrode is proportional to the amount of charge passed through the electrolytic solution.
The equation we will use is: mass = (current × time × atomic mass) / (electronic charge × electrochemical equivalent)
where: - current = 16.0 A (given)
- time = 4.00 h (given)
- atomic mass of copper (Cu) = 63.55 g/mol
- electronic charge = 1.602 × 10^-19 C
- electrochemical equivalent of copper = 0.329 g/C.
Plugging in the values, we get: mass = (16.0 A × 4.00 h × 63.55 g/mol) / (1.602 × 10^-19 C × 0.329 g/C)
mass = 0.299 g. Therefore, the mass of Cu(s) electroplated is 0.299 g.
To determine the mass of Cu(s) electroplated by running 16.0 A of current through a Cu²⁺(aq) solution for 4.00 h, we can use Faraday's laws of electrolysis.
First, find the total charge passed through the solution: Charge (Q) = Current (I) × Time (t)
Q = 16.0 A × 4.00 h × (3600 s/h) = 230400 C, Next, determine the moles of Cu²⁺(aq) reduced using Faraday's constant (F = 96485 C/mol): Moles (n) = Charge (Q) / (Faraday's constant × number of electrons involved in the reaction)
For Cu²⁺(aq) + 2e⁻ → Cu(s), 2 electrons are involved.
n = 230400 C / (96485 C/mol × 2) = 1.195 mol.
Finally, find the mass of Cu(s) electroplated:
Mass (m) = Moles (n) × Molar mass (M)
M(Cu) = 63.5 g/mol
m = 1.195 mol × 63.5 g/mol = 75.9 g, So, 75.9 g of Cu(s) is electroplated in this process.
To know more about solution click here
brainly.com/question/29015830
#SPJ11
The mass of Cu(s) electroplated by running 16.0 A of current through a Cu2+ (aq) solution for 4.00 h is approximately 75.99 g.
To determine the mass of Cu(s) electroplated by running 16.0 A of current through a Cu2+ (aq) solution for 4.00 h,
1. Determine the total charge passed through the solution using the formula: Q = I × t
Where Q is the charge (in coulombs), I is the current (in amperes), and t is the time (in seconds).
2. Convert the time to seconds: 4.00 h × (3600 s/h) = 14400 s.
3. Calculate the charge: Q = 16.0 A × 14400 s = 230400 C.
4. Calculate the number of moles of Cu2+ ions reduced using Faraday's law: n = Q / (n × F)
Where n is the number of moles, Q is the charge, n is the number of electrons transferred (in this case, it is 2 for Cu2+), and F is Faraday's constant (96485 C/mol).
5. Calculate the moles of Cu2+ ions: n = 230400 C / (2 × 96485 C/mol) = 1.195 mol.
6. Determine the mass of Cu(s) using the molar mass of copper (63.55 g/mol): mass = n × molar mass
mass = 1.195 mol × 63.55 g/mol = 75.99 g.
The mass of Cu(s) electroplated by running 16.0 A of current through a Cu2+ (aq) solution for 4.00 h is approximately 75.99 g.
To know more about Faraday's law:
https://brainly.com/question/1640558
#SPJ11
Question 69
If water in a stream is a 20 degrees C and has nine mg/1 oxygen per liter:
a. It would be reasonable to assume the stream was grossly polluted
b. It would probably be comfortable for rainbow trout
c. It would be safe for drinking
d. Has too little oxygen for even catfish to live in
Based on the information provided, if water in a stream is at 20 degrees C and has 9 mg/l oxygen per liter, the most appropriate answer would be: b. It would probably be comfortable for rainbow trout Rainbow trout typically thrive in water temperatures between 10-20 degrees C and require dissolved oxygen levels of 7-10 mg/l. In this scenario, the temperature and oxygen levels are suitable for rainbow trout.
Rainbow trout prefer water temperatures between 10-18 degrees C and require a minimum of 6 mg/L of dissolved oxygen to survive. The stream in question has a temperature within their preferred range and an oxygen concentration well above their minimum requirement. Therefore, it is likely a suitable habitat for rainbow trout. However, this does not necessarily mean the water is safe for human consumption. so, the correct option is B. It would probably be comfortable for rainbow trout.
To know more about water in a stream click here:
https://brainly.com/question/31090160
#SPJ11
Do ethers boil at high or low temperatures?
The boiling point of ethers varies depending on their chemical structure, but in general, ethers tend to have lower boiling points than comparable alcohols or carboxylic acids.
This is because ethers have weaker intermolecular forces than these other functional groups. However, the exact boiling point of a particular ether will depend on factors such as its molecular weight, shape, and polarity. Some ethers, such as diethyl ether, have relatively low boiling points and can boil at temperatures as low as 35 degrees Celsius, while others may have higher boiling points and require temperatures above 100 degrees Celsius to boil.
learn more about diethyl ether Refer: https://brainly.com/question/30364751
#SPJ11
write in word equation When zinc (Zn) is reacted with a solution of copper (II) sulfate (CuSO4), copper (Cu) and a solution of zinc sulfate (ZnSO4) is formed
The word equation for the given reaction is:
Zinc + Copper (II) Sulfate → Copper + Zinc Sulfate
The chemical interaction between zinc (Zn) and a solution of copper (II) sulfate is described by the word equation that is presented. In this reaction, the copper ions from the copper sulfate solution are reduced, which means they gain electrons, while the zinc metal is oxidized, which means it loses electrons.
Copper (Cu) and zinc sulfate are the two products that are produced as a result of the reaction. Zinc sulfate is a white crystalline solid that is soluble in water, whereas copper is a reddish-brown metal that is solid at normal temperatures.
The stoichiometry of the reaction—that is, the proportion of reactants to products in terms of the number of moles—is revealed by the coefficients in the balanced equation.
learn more about zinc sulfate here
https://brainly.com/question/29708158
#SPJ1
What is the average mass of one S atom?A) 32.07 g D) 5.32 x 10-23 amuB) 32.07 amu E) 1.93 x 1025 gC) 32.07 g/mol
The average mass of one sulfur atom is approximately 32.07 amu. The correct answer is option B.
The average mass of one sulfur (S) atom can be found by considering its atomic mass, which is commonly expressed in atomic mass units (amu). Sulfur has an atomic mass of approximately 32.07 amu, which corresponds to option B) in your list. This value represents the weighted average of the masses of all naturally occurring isotopes of sulfur, taking into account their relative abundance.
It is important to note that the atomic mass of an element is different from its molar mass, which is expressed in grams per mole (g/mol). For sulfur, the molar mass is also approximately 32.07 g/mol, as the numerical value remains the same when converting from amu to g/mol.
Therefore, option B is correct.
For more such questions on average mass, click on:
https://brainly.com/question/31562188
#SPJ11
21. 4.21 moles of S2Cl4 are introduced into a 2.0 L vessel. S2Cl4(g) 2SCl2(g)
At equilibrium, 1.25 moles of S2Cl4 are found to remain in the container. Calculate Kc for
this reaction.
The concentrations of the reactants and products at equilibrium, we can calculate Kc 2.56
What is concentrations?Concentration is a measure of the amount of a substance within a given quantity of another substance or medium. It is usually expressed as mass per unit volume. For example, a concentration of a solute in a solution is the mass of that solute, per unit volume of the solution. Concentration is an important concept in many fields, including chemistry, physics, and biology, amongst other sciences.
The reaction that is happening is: S₂Cl₄(g) → 2SCl₂(g)
For the reactant, S₂Cl₄ at equilibrium:
Moles S₂Cl₄ = 1.25 moles
Volume = 2.0 L
Concentration = 1.25 moles / 2.0 L = 0.625 M
For the product, SCl₂ at equilibrium:
Moles SCl₂ = 2.5 moles (since 2 moles of SCl₂ are produced for every mole of S₂Cl₄)
Volume = 2.0 L
Concentration = 2.5 moles / 2.0 L = 1.25 M
Now that we have the concentrations of the reactants and products at equilibrium, we can calculate Kc.
Kc = [SCl₂]₂ / [S₂Cl₄]
Kc = (1.25 M)² / 0.625 M
Kc = 2.56
To learn more about concentrations
https://brainly.com/question/10838453
#SPJ1
Inspect the following SN2 reaction. What happens to the reaction rate in each of the following instances? (a)The leaving group is changed from Br-to I- (b) The solvent is changed from acetone to CH3CH2OH (c) The alkyl halide is changed from CH3(CH2)4Br to CH3CH2CH2CH(Br)CH3 (d) Theconcentration of CN- is increased by a factor of five ;and (e) The concentrations of both the alkyl halide and -CN are increased by a factor of five.
The SN2 reaction is a second-order nucleophilic substitution reaction where a nucleophile attacks a carbon atom with a leaving group. The reaction rate depends on several factors including the strength of the nucleophile, the leaving group, the solvent, and the concentration of the reactants.
In the following instances, the reaction rate will be affected in the following ways:
(a) If the leaving group is changed from Br- to I-, the reaction rate will increase. This is because I- is a better leaving group than Br- due to its larger size and weaker bond with carbon.
(b) If the solvent is changed from acetone to CH3CH2OH, the reaction rate will decrease. This is because CH3CH2OH is a polar protic solvent, which stabilizes the nucleophile and hinders its attack on the alkyl halide.
(c) If the alkyl halide is changed from CH3(CH2)4Br to CH3CH2CH2CH(Br)CH3, the reaction rate will decrease. This is because the bulkier alkyl halide hinders the approach of the nucleophile to the carbon atom, making it harder for the reaction to take place.
(d) If the concentration of CN- is increased by a factor of five, the reaction rate will increase. This is because the nucleophile is the limiting reagent in the reaction, and increasing its concentration will increase the frequency of successful collisions with the alkyl halide.
(e) If the concentrations of both the alkyl halide and -CN are increased by a factor of five, the reaction rate will increase. This is because increasing the concentrations of both reactants increases the frequency of successful collisions between them, leading to a higher reaction rate.
the reaction rate of an SN2 reaction is affected by several factors, including the leaving group, solvent, alkyl halide, and concentration of reactants. Understanding these factors is important in predicting and optimizing reaction rates.
to learn more about SN2 reaction
https://brainly.com/question/29589832
#SPJ11
SHOW YOUR WORK FOR FULL CREDIT.
The pressure on a 5.0 L tank of oxygen changes from 105 kPa to 45 kPa. If the temperature hasn't changed, what is the volume of the gas?
Answer:
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
P1V1/T1 = P2V2/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature.
We are given:
P1 = 105 kPa
V1 = 5.0 L
P2 = 45 kPa
T1 = T2 (temperature is constant)
We need to find V2, the final volume.
Substituting the given values into the combined gas law equation, we get:
(105 kPa)(5.0 L)/T = (45 kPa)V2/T
Simplifying, we get:
V2 = (105 kPa)(5.0 L)/(45 kPa) = 11.7 L
Therefore, the volume of the gas is 11.7 L when the pressure changes from 105 kPa to 45 kPa, assuming the temperature remains constant.
define solubility .Explain general principle of solubility
The word Solubility means the number of grams of the solute dissolved in 100g of solvent to prepare a saturated solution at a particular temperature.
Here, are few general principles of Solubility mentioned below :
⇒ Polar substances are soluble in polar solvents. Ionic solids and polar covalent compounds are soluble in water, e.g, KCL, [tex]Na_{2}CO_{3}[/tex] , Sugar and alcohol are soluble in water.
⇒ Non Polar substances are soluble in water. Non Polar covalent compounds are not soluble in water such as ether, benzene and petrol are insoluble in water.
To learn more about Solubility: https://brainly.com/question/318077
Question 17
Which one of the following is most hazardous to human health?
a. Asbestos
b. Sulfur dioxide
c. Ozone
d. Nitrogen oxide
The most hazardous to human health out of these options would be asbestos. It is a known carcinogen and can cause lung cancer and other respiratory diseases. Sulfur dioxide, ozone, and nitrogen oxide can also be harmful, but generally in high concentrations or prolonged exposure.
The most hazardous to human health among the options provided is asbestos, and it's exposure can lead to severe lung diseases, such as asbestosis, lung cancer, and mesothelioma.
To know more about health hazards, click here:-
https://brainly.com/question/31039905
#SPJ11
Why can meso-hydrobenzoin be separated from (R,R) and (S,S) hydrobenzoin by recrystallization?
Meso-hydrobenzoin, (R,R) hydrobenzoin, and (S,S) hydrobenzoin are stereoisomers that have the same molecular formula but different spatial arrangements of atoms. In meso-hydrobenzoin, the molecule has a plane of symmetry that divides it into two identical halves.
Recrystallization is a purification technique that exploits differences in solubility between the compound of interest and impurities. When a mixture of meso-hydrobenzoin, (R,R) hydrobenzoin, and (S,S) hydrobenzoin is dissolved in a solvent at high temperature, all three compounds will dissolve. However, when the solution is cooled, the solubility of each compound will decrease, and they will start to crystallize out of solution.
Meso-hydrobenzoin can be separated from (R,R) and (S,S) hydrobenzoin by recrystallization because meso-hydrobenzoin forms crystals that are different from those of (R,R) and (S,S) hydrobenzoin. This is because meso-hydrobenzoin has a plane of symmetry, which means that it can pack differently in a crystal lattice than (R,R) and (S,S) hydrobenzoin. Therefore, when the solution is cooled, meso-hydrobenzoin will form crystals that are distinct from those of (R,R) and (S,S) hydrobenzoin, allowing for their separation.
Meso-hydrobenzoin can be separated from (R,R) and (S,S) hydrobenzoin by recrystallization because it has different physical properties, such as solubility and melting point, due to its unique stereochemistry. Recrystallization relies on these differences in physical properties to selectively purify a compound from a mixture.
To know more about Hydrobenzoin click here .
brainly.com/question/30880494
#SPJ11
23. In a linked-based implementation of the ADT list with a tail reference, what is the performance of adding an entry at the end of the list?
a. O(1)
b. O(log n)
c. O(n) d. O(n 2 )
In a linked-based implementation of the ADT list with a tail reference, what is the performance of adding an entry at the end of the list, the correct option is (a) O(1).
The performance of adding an entry at the end of the list in a linked-based implementation of the ADT list with a tail reference is O(1), which means it is constant time complexity. This is because with a tail reference, we can easily access the last node in the list and add a new node after it without having to traverse through the entire list.
A queue is the abstract data type (ADT) is most suitable to store a list of perishable products such that the product with the nearest expiry date is removed first.
In a linked-based implementation of the ADT list with a tail reference, what is the performance of adding an entry at the end of the list, the correct option is (a) O(1) .
To know more about ADT click here:
https://brainly.com/question/29383951
#SPJ11
How much warmer are average summer temperatures in the UHI?
The magnitude of the urban heat island (UHI) effect on summer temperatures can vary depending on factors such as the size of the urban area, the surrounding landscape, and local weather conditions. However, studies have shown that the UHI effect can lead to temperatures in urban areas that are 1-3°C (1.8-5.4°F) warmer on average during the summer compared to nearby rural areas.
In some cases, the temperature difference between urban and rural areas can be as much as 10°C (18°F) during heatwaves.
The urban heat island effect is a phenomenon that occurs in built-up areas where there is a high concentration of buildings, roads, and other structures made of materials that absorb and re-radiate heat.
During the day, the sun's rays heat up these surfaces, which in turn release heat into the surrounding air. This causes urban areas to be warmer on average than surrounding rural areas.
For more question on urban heat island click on
https://brainly.com/question/23712495
#SPJ11
Why don't vinyl or aryl halides undergo Sn2?
Vinyl and aryl halides do not undergo Sn2 reactions due to their respective electronic configurations. Both vinyl and aryl halides have a significant degree of pi-bonding character in their molecular orbitals, which causes the carbon-halogen bond to be highly polarized.
As a result, the carbon-halogen bond becomes highly reactive toward nucleophilic attack, which can lead to the formation of carbocation intermediates. These carbocation intermediates are highly unstable and reactive, and they can quickly react with solvent molecules, rendering them incapable of undergoing Sn2 reactions. Additionally, the steric hindrance of the aryl group in aryl halides can also inhibit Sn2 reactions by making it difficult for a nucleophile to approach the carbon atom. Overall, the electronic and steric properties of vinyl and aryl halides prevent them from undergoing Sn2 reactions.
Find out more about Sn2 reactions
at brainly.com/question/29341964
#SPJ11
Chlorine gas is considered to be 100% pure, bleach is approximately 5 1/4% pure, while HTH dry powder chlorine is set at ___ % purity.
a.) 20%
b.) 45%
c.) 65%
d.) 80%
HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.
To maintain your pool clean, clear, and prepared for summertime enjoyment, it sanitises, manages algae, clarifies, softens pool water, even prevents stain and scale. sanitizer and shock therapy combined. eliminates algae and germs. softens, clarifies, and guards against scale and stains. Water that is clearly flashing blue in 24 hours. HTH is a potent chlorinating agent with a chlorine concentration of more than 30%. This substance is frequently used to disinfect swimming pools. Hence, HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.
To know more about chlorine click here:
https://brainly.com/question/13123721
#SPJ11