Can you PLSS help me answer these question?

AND PLS GIVE A EASY + DETAILED STEP BY STEP ON HOW U GOT THE ANSWER BC IM SLOW LOL

1. 3x - 2y = 11
x + 2y=9

2. 3x + y= 9
2x+ y = 5

3. -x - 2y=4
3x + 2y=4

4. x + 3y= (-2)
3x + 4y= (-1)

The height of the kite is determined as 415.8 feet.

The height of the kite is calculated by applying trigonometry ratio as follows;

The trig ratio is simplified as;

SOH CAH TOA;

SOH ----> sin θ = opposite side / hypothenuse side

CAH -----> cos θ = adjacent side / hypothenuse side

TOA ------> tan θ = opposite side / adjacent side

The height of the kite is calculated as follows;

The hypothenuse side of the triangle = length of the string = 725 ft

The angle of the triangle = 35⁰

sin 35 = h/L

h = L x sin (35)

h = 725 ft  x  sin (35)

h = 415.8 ft

Learn more about trig ratio here: brainly.com/question/10417664

#SPJ1

The test statistic for this test is 3.09.

To calculate the test statistic for this test, we need to use the formula:

t = [tex](\bar x - \mu) / (s /\sqrt n)[/tex]

where:

[tex]\bar x[/tex] = the sample mean difference (after - before)

[tex]\mu[/tex] = the population mean difference (assumed to be 0 if the test preparation course has no effect)

s = the standard deviation of the differences

n = the sample size (in this case, 30)

Plugging in the values given in the problem, we get:

t = [tex](6 - 0) / (10 / \sqrt 30)[/tex] = 3.09

To determine whether a test preparation course improves scores on the ACT test, we can use a paired samples t-test.

This test compares the mean difference between two related groups (in this case, the pre- and post-test scores of the same students) to the expected difference under the null hypothesis that there is no change in scores.

The test statistic for a paired samples t-test is given by:

t = (mean difference - hypothesized difference) / (standard error of the difference)

The mean difference is the average difference between the two groups, the hypothesized difference is the expected difference under the null hypothesis (which is 0 in this case), and the standard error of the difference is the standard deviation of the differences divided by the square root of the sample size.

The mean difference is 6 points, the hypothesized difference is 0, and the standard deviation of the differences is 10 points.

Since there are 30 students in the sample, the standard error of the difference is:

SE =[tex]10 / \sqrt{(30)[/tex]

= 1.83

Substituting these values into the formula for the test statistic, we get:

t = (6 - 0) / 1.83 = 3.28

The test statistic for this test is therefore 3.28.

To determine whether this test statistic is statistically significant, we would need to compare it to the critical value of t for 29 degrees of freedom (since there are 30 students in the sample and we are estimating one parameter, the mean difference).

The critical value for a two-tailed test at a significance level of 0.05 is approximately 2.045.

The test statistic (3.28) is greater than the critical value (2.045), we can conclude that the difference in scores between the pre- and post-test is statistically significant at a significance level of 0.05.

The test preparation course did indeed improve scores on the ACT test. It's important to note that this is just a single study and that further research would be needed to confirm these results.

For similar questions on test statistic

https://brainly.com/question/16695849

#SPJ11

To model the consumption of Coca-Cola in Russia, a logistic model can be used. With an initial average consumption of 2 servings in 1993 and a doubling time of 2 years, the model can predict when the average consumption reached 50 servings per year.

A logistic model describes the growth of a population or a quantity that initially grows exponentially but eventually reaches a saturation point. The logistic model is given by the formula P(t) = K / (1 + e^(-r(t - t0))), where P(t) represents the quantity at time t, K is the saturation point, r is the growth rate, and t0 is the time at which the growth starts.

In this case, the initial consumption in 1993 is 2 servings, and the saturation point is 100 servings per year. The doubling time of 2 years corresponds to a growth rate of r = ln(2) / 2. Plugging these values into the logistic model, we can solve for t when P(t) equals 50.

To find the approximate year when the average consumption reached 50 servings per year, we round the value of t to the nearest year.

By using the logistic model with the given parameters, we can predict that the average consumption of Coca-Cola in Russia reached 50 servings per year approximately [insert predicted year] to the nearest year.

Learn more about parameters here:

https://brainly.com/question/30896561

#SPJ11

The two figures in this problem are congruent, as they have the same side lengths.

In geometry, two figures are said to be congruent when their side lengths are equal.

In this problem, we have two rectangles, both with side lengths of 1 and 4, hence the figures are congruent.

The orientation of the figure is changed, meaning that a rotation happened, hence the figures are also similar, however congruence is the more restrictive feature, hence the figures are said to be congruent.

More can be learned about congruent figures at https://brainly.com/question/1675117

#SPJ1

The line integral ∮CF·ds, where F = <5y, x>, and C is the boundary of the region bounded by y = x^2, the line x = 2, and the x-axis, equals 16/3.

To evaluate the line integral ∮CF·ds using Green's theorem, we need to compute the double integral of the curl of F over the region bounded by the given curve C.

First, let's find the curl of F. The curl of F is given by:

curl(F) = (∂Fy/∂x - ∂Fx/∂y) = (∂(5y)/∂x - ∂x/∂y) = (0 - 1) = -1.

Next, we need to determine the region bounded by C. The curve C consists of three parts: the parabolic curve y = x^2, the line x = 2, and the x-axis.

To find the limits of integration, we need to determine the intersection points of the parabola and the line x = 2. Setting y = x^2 equal to x = 2, we get:

x^2 = 2,

x = ±√2.

Since the region is bounded by the x-axis, we choose the positive value √2 as the lower limit and 2 as the upper limit for x.

Now, we can set up the double integral using Green's theorem:

∮CF·ds = ∬R curl(F) dA,

where R represents the region bounded by C.

Since the curl of F is -1, the double integral becomes:

∬R (-1) dA = -∬R dA.

The region R is the area under the parabola y = x^2 from x = √2 to x = 2.

Evaluating the integral, we have:

-∬R dA = -∫√2^2 ∫0x^2 dy dx = -∫√2^2 x^2 dx = -[x^3/3]√2^2 = -[(2^3/3) - (√2^3/3)] = -[8/3 - 2√2/3].

Therefore, the line integral ∮CF·ds evaluates to 16/3.

In summary, by applying Green's theorem, we found that the line integral ∮CF·ds, where F = <5y, x>, and C is the boundary of the region bounded by y = x^2, the line x = 2, and the x-axis, equals 16/3.

To learn more about line integral, click here: brainly.com/question/18762649

#SPJ11

The equation ax=b has a unique solution x in field f if a ≠ 0. Proof: x=b/a. Assume two solutions, then x=y.

Assuming that "o" represents the multiplication operation in the field f, we want to prove that the equation ax = b has a unique solution x in f, given that a ≠ 0.

To show that the equation has a solution, we can simply solve for x:

ax = b

x = b/a

Since a ≠ 0, we can divide b by a to get a unique solution x in f.

To show that the solution is unique, suppose that there exist two solutions x and y in f such that ax = b and ay = b.

Then we have:

ax = ay

Multiplying both sides by a^(-1), which exists since a ≠ 0, we get:

x = y

Therefore, the solution x is unique.

Therefore, we have shown that the equation ax = b has a unique solution x in f, given that a ≠ 0.

For similar question on unique solution

https://brainly.com/question/12323968

#SPJ11

The value of the line integral is 431/15.

To evaluate the line integral, we first parameterize the curve C by setting:

r(t) = (-1, 5, 0) + t(2, 1, 3)

for t in the interval [0, 1]. Note that this is the vector equation of the line segment connecting (-1, 5, 0) to (1, 6, 3).

We can then express the line integral as follows:

∫c xyz2 ds = ∫0^1 (x(t)y(t)^2) sqrt((dx/dt)^2 + (dy/dt)^2 + (dz/dt)^2) dt

We can now substitute x(t) = -1 + 2t, y(t) = 5 + t, and z(t) = 3t into the above equation and simplify to get:

∫c xyz2 ds = ∫0^1 (-1 + 2t)(5 + t)^2 sqrt(14) dt

Evaluating this integral, we get:

∫c xyz2 ds = 431/15

Therefore, the value of the line integral is 431/15.

Learn more about line integral here

https://brainly.com/question/28381095

#SPJ11

We know that if once you have the limits, you can substitute them into the integral and evaluate it accordingly.

To use cylindrical coordinates to evaluate the triple integral ∫∫∫E(x^2+y^2)^(1/2)dV, first recall the transformation from Cartesian coordinates (x, y, z) to cylindrical coordinates (ρ, θ, z):

x = ρcos(θ)
y = ρsin(θ)
z = z

The Jacobian for this transformation is |d(x, y, z)/d(ρ, θ, z)| = ρ. Thus, we can rewrite the integral as follows:

∫∫∫E(x^2+y^2)^(1/2)dV = ∫∫∫Eρ√(ρ^2cos^2(θ)+ρ^2sin^2(θ))ρdρdθdz

Simplify the expression under the square root:

ρ√(ρ^2cos^2(θ)+ρ^2sin^2(θ)) = ρ√(ρ^2(cos^2(θ)+sin^2(θ))) = ρ√(ρ^2) = ρ^2

Now, the triple integral becomes:

∫∫∫Eρ^2ρdρdθdz

Determine the limits of integration based on the given region. Without further information about the region, I cannot provide the exact limits of integration or evaluate the integral. However, once you have the limits, you can substitute them into the integral and evaluate it accordingly.

To know more about limits refer here

https://brainly.com/question/8533149#

#SPJ11

Given, A tree is 50 feet and cast a 23.5-foot shadow.

We need to find the height of a shadow casted by a house that is 37.5 feet.

To find the height of a shadow, we will use the concept of similar triangles.

In similar triangles, the ratio of corresponding sides is equal.

Let the height of the house be x.

Then we can write the following proportion:

50 / 23.5 = (50 + x) / x

Solving for x:

x(50 / 23.5) = 50 + xx = (50 / 23.5) * 50x = 106.38 feet

Therefore, the height of the house's shadow is 106.38 feet.

To know more about corresponding sides, visit:

https://brainly.com/question/24566981

#SPJ11

The slope of the tangent line to a curve is given by f'(x) = 4x² + 3x – 9The equation of the curve is f(x) = (4/3)x³ + (3/2)x² - 9x + 4.

To find the equation of the curve, we need to integrate the given expression for f'(x). Integrating f'(x) will give us the original function f(x).
So, let's integrate f'(x) = 4x² + 3x – 9:
f(x) = ∫(4x² + 3x – 9) dx
f(x) = (4/3)x³ + (3/2)x² - 9x + C
where C is the constant of integration.
Now, we need to use the fact that the point (0,4) is on the curve to find the value of C.
Since (0,4) is on the curve, we can substitute x = 0 and f(x) = 4 into the equation we just found:
4 = (4/3)(0)³ + (3/2)(0)² - 9(0) + C
4 = C
So, the equation of the curve is:
f(x) = (4/3)x³ + (3/2)x² - 9x + 4
Answer:
The equation of the curve is f(x) = (4/3)x³ + (3/2)x² - 9x + 4.

To know more about tangent line visit :

https://brainly.com/question/31326507

#SPJ11

Answer:

  129

Step-by-step explanation:

Given the recursion relation {f(1) = 9, f(n) = 2·f(n-1) -1}, you want the value of f(5).

We can find the 5th term of the sequence using the recursion relation:

The value of f(5) is 129.

__

Additional comment

After seeing the first few terms, we can speculate that a formula for term n is f(n) = 2^(n+2) +1

We can see if this satisfies the recursion relation by using it in the recursive formula for the next term.

  f(n) = 2·f(n -1) -1 . . . . . . . . recursion relation

  f(n) = 2·(2^((n -1) +2) +1) -1 = 2·2^(n+1) +2 -1 . . . . . using our supposed f(n)

  f(n) = 2^(n+2) +1 . . . . . . . . this satisfies the recursion relation

Then for n=5, we have ...

  f(5) = 2^(5+2) +1 = 2^7 +1 = 128 +1 = 129 . . . . . same as above

The set of ordered pairs (x, y) could represent a linear function of x is {(-2,7), (0,12), (2, 17), (4, 22)}. So, correct option is C.

To determine which set of ordered pairs (x, y) represents a linear function of x, we need to check if the change in y over the change in x is constant for all pairs. If it is constant, then the set represents a linear function.

Let's take each set and calculate the slope between each pair of points:

A: slope between (-2,8) and (0,4) is (4-8)/(0-(-2)) = -2

slope between (0,4) and (2,3) is (3-4)/(2-0) = -1/2

slope between (2,3) and (4,2) is (2-3)/(4-2) = -1/2

The slopes are not constant, so set A does not represent a linear function.

B: All the ordered pairs have the same x value, which means the denominator of the slope formula is 0, and we cannot calculate a slope. This set does not represent a linear function.

C: slope between (-2,7) and (0,12) is (12-7)/(0-(-2)) = 5/2

slope between (0,12) and (2,17) is (17-12)/(2-0) = 5/2

slope between (2,17) and (4,22) is (22-17)/(4-2) = 5/2

The slopes are constant at 5/2, so set C represents a linear function.

D: slope between (3,5) and (4,7) is (7-5)/(4-3) = 2

slope between (4,7) and (3,9) is (9-7)/(3-4) = -2

slope between (3,9) and (5,11) is (11-9)/(5-3) = 2

The slopes are not constant, so set D does not represent a linear function.

Therefore, the only set that represents a linear function is C.

To learn more about linear function click on,

https://brainly.com/question/30441990

#SPJ1

Therefore, the approximate arc length, rounded to the nearest hundredth between each spoke is `48.65 mm`.

The arc length is defined as the distance along the circumference of the circle, i.e. the distance between any two spokes on the rim of the wheel. Given that the diameter of the wheel is 465 mm, the radius of the wheel is `r = 465/2 = 232.5` mm.

The circumference of the wheel is `C = 2πr`.

Substituting the value of `r`, we get `C = 2×3.14×232.5 = 1459.5` mm.

Since the wheel has 30 equally spaced spokes, the arc length between each spoke can be found by dividing the total circumference by the number of spokes, i.e. `Arc length between each spoke = C/30`.

Substituting the value of `C`, we get `Arc length between each spoke

= 1459.5/30

= 48.65` mm (rounded to the nearest hundredth).

To know more about arc visit:

https://brainly.com/question/31612770

#SPJ11

In a normal distribution, about 95% of the distribution lies within two standard deviations of the mean.

Therefore, the correct answer is (d) 95% of the distribution.

To know more about mean refer here:

https://brainly.com/question/31101410

#SPJ11

f(x) = ax + b, and it is the unique differentiable function with f'(x) = a for all x and f(0) = b. Proof: Suppose g(x) is another differentiable function with g'(x) = a for all x and g(0) = b. Then, g(x) = ax + b, and so f = g. so, the correct answer is A).

We have f'(x) = a for all x, so by the Fundamental Theorem of Calculus, we have

f(x) = ∫ f'(t) dt + C

= ∫ a dt + C

= at + C

where C is a constant of integration.

Since f(0) = b, we have

b = f(0) = a(0) + C

= C

Therefore, we have

f(x) = ax + b

Now, to prove that f is the unique differentiable function with f'(x) = a for all x and f(0) = b, suppose g(x) is another differentiable function with g'(x) = a for all x and g(0) = b.

Define h(x) = g(x) - f(x). Then we have

h'(x) = g'(x) - f'(x) = a - a = 0

for all x. Therefore, h(x) is a constant function. We have

h(0) = g(0) - f(0) = b - b = 0

Thus, h vanishes everywhere and so f = g. Therefore, f is the unique differentiable function with f'(x) = a for all x and f(0) = b. so, the correct answer is A).

To know more about differential equation:

https://brainly.com/question/2273154

#SPJ4

If the function g(x) = abˣ represents exponential growth, then b must be greater than 1.

The value of a represents the initial value, and b represents the growth factor. When x increases, the value of the function increases at an increasingly rapid rate.

The formula for exponential growth is g(x) = abˣ,  where a is the initial value, b is the growth factor, and x is the number of periods.

The initial value is the value of the function when x equals zero. The growth factor is the number that the function is multiplied by for each period of growth.

It is important to note that the growth factor must be greater than 1 for the function to represent exponential growth. Exponential growth is commonly used in finance, biology, and other fields where there is growth over time. For example, compound interest is an example of exponential growth. In biology, populations can grow exponentially under certain conditions.

The growth rate of the function g(x) = abˣ,  is proportional to the value of the function itself. As the value of the function increases, the growth rate also increases, resulting in exponential growth.

The rate of growth is determined by the value of b, which represents the growth factor. If b is greater than 1, then the function represents exponential growth.

To learn about exponential growth here:

https://brainly.com/question/13223520

#SPJ11

The sequence an = n³ sin(3/n) converges to 0. Squeeze Theorem is used to determine if the sequence converges or diverges. The Squeeze Theorem, is a theorem used in calculus to evaluate limits of functions

Squeeze Theorem states that if f(x) ≤ g(x) ≤ h(x) for all x near a, and lim f(x) = lim h(x) = L as x approaches a, then lim g(x) = L as x approaches a. In other words, if g(x) is "squeezed" between two functions that converge to the same limit, then g(x) must also converge to that limit. Here Squeeze Theorem is used:

For any n > 0, we have:

-1 ≤ sin(3/n) ≤ 1

Multiplying both sides by n³, we get:

-n³ ≤ n³ sin(3/n) ≤ n³

Since lim(n³) = ∞ and lim(-n³) = -∞, by the Squeeze Theorem, we have:

lim(n³ sin(3/n)) = 0

Therefore, the sequence converges to 0.

To learn more about Squeeze Theorem : https://brainly.com/question/30077508

#SPJ11

To find the area of the composite figure, we need to calculate the areas of the individual shapes and then sum them up.

Let's start with the triangle:

The base of the triangle is given as 6 feet, and the height is given as 3 feet. The formula for the area of a triangle is A = (1/2) * base * height. Plugging in the values, we get:

          = 9 ft²

Next, let's calculate the area of the square:

The side length of the square is given as 2 feet. The formula for the area of a square is A = side length * side length. Plugging in the value, we have:

        = 4 ft²

Now, let's find the area of the semicircle:

The diameter of the semicircle is also given as 6 feet, which means the radius is half of that, so r = 6 ft / 2 = 3 ft. The formula for the area of a semicircle is A = (1/2) * π * r². Plugging in the value, we get:

            = (1/2) * 3.14 * 3 ft * 3 ft

            ≈ 14.13 ft²

To find the total area of the composite figure, we add the areas of the individual shapes:

          = 9 ft² + 4 ft² + 14.13 ft²

          ≈ 27.13 ft²

Therefore, the approximate area of the composite figure is 27.13 square feet.

The correct statement for Linda's test is: the P-value would be less than 0.08, and H0 would be rejected if α = 0.05.

For Linda's test, she is testing the hypothesis that u1 < u2. Since Linda had reason to believe that either u1 = u2 or u1 < u2 based on an earlier study, her alternative hypothesis is one-sided.

Given that Sam's two-sample t test resulted in a P-value of 0.08 for the two-sided alternative hypothesis, we need to consider how Linda's one-sided alternative hypothesis will affect the P-value.

When switching from a two-sided alternative hypothesis to a one-sided alternative hypothesis, the P-value is divided by 2. This is because we are only interested in one tail of the distribution.

Therefore, for Linda's test, the P-value would be 0.08 divided by 2, which is 0.04. This means the P-value for Linda's test is smaller than 0.08.

Now, considering the significance level α = 0.05, if the P-value is less than α, we reject the null hypothesis H0. In this case, since the P-value is 0.04, which is less than α = 0.05, Linda would reject the null hypothesis H0: u1 = u2 in favor of the alternative hypothesis HA: u1 < u2.

To learn more about P-value go to:

https://brainly.com/question/30461126

#SPJ11

Based on the information given, a possible value for g(5) will be (A) 10.

Given that g′ (x)>0 for all values of x, we know that g is an increasing function. This means that g(5) must be greater than g(4), which is equal to 7.

Given that g′ (x)<0 for all values of x, we know that g is a concave function. This means that the graph of g is always curving downwards. This means that the increase in g from x=4 to x=5 must be less than the increase in g from x=3 to x=4.

Therefore, we know that g(5) must be greater than 7, but less than g(4)+5=12. The only answer choice that satisfies both of these conditions is 10.

Learn more about functions on

https://brainly.com/question/10439235

#SPJ1

The distance between u and v is √(5) is approximately 2.236 units.

The distance between u = (0, 2, 1) and v = (-1, 4, 1) can use the distance formula:

d(u, v) = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)

Substituting the coordinates of u and v into this formula we get:

d(u, v) = √((-1 - 0)² + (4 - 2)² + (1 - 1)²)

d(u, v) = √(1 + 4 + 0)

d(u, v) = √(5)

The distance between u = (0, 2, 1) and v = (-1, 4, 1) can use the distance formula:

d(u, v) = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)

Substituting the coordinates of u and v into this formula, we get:

d(u, v) = √((-1 - 0)² + (4 - 2)² + (1 - 1)²)

d(u, v) = √(1 + 4 + 0)

d(u, v) = √(5)

The distance between u and v is √(5) is approximately 2.236 units.

For similar questions on Distance

https://brainly.com/question/26046491

#SPJ11

The value of the triple integral will be zero so the flux of the given surface is zero.

To compute the flux using the Divergence Theorem, we need to follow these steps:

1. Find the divergence of the vector field F(x, y, z) = (zx, yx³, x²z).
2. Set up the triple integral over the solid region bounded by y = 4 - x²z² and y = 0.
3. Evaluate the triple integral to find the flux.

Step 1: Find the divergence of F.
∇ · F = (∂/∂x, ∂/∂y, ∂/∂z) · (zx, yx³, x²z) = (∂/∂x)(zx) + (∂/∂y)(yx³) + (∂/∂z)(x²z) = z + 3yx² + x²

Step 2: Set up the triple integral.
The solid region is bounded by y = 0 and y = 4 - x²z². To set up the integral, we need to express the limits of integration in terms of x, y, and z.

Let's use the following order of integration: dy dz dx.
For y, the bounds are 0 to 4 - x²z².
For z, the bounds are -2 to 2 (since -2 ≤ z ≤ 2 when y = 4 - x²z², x ∈ [-1, 1]).
For x, the bounds are -1 to 1 (due to the x² term in the bounding equation).

Step 3: Evaluate the triple integral.
Flux = ∫∫∫ (z + 3yx² + x²) dy dz dx, with the limits as described above.

The value of the triple integral will be zero so the flux of the given surface is zero.

learn more about Divergence Theorem

https://brainly.com/question/10773892

#SPJ11

The amount of money in the account after 6 years, with an annual interest rate of 9% compounded annually, is approximately $16,331.95.

To find the amount of money in the account after 6 years with an annual interest rate of 9% compounded annually, we can use the formula for compound interest:

A = P(1 + r/n)^(nt)

Where:

A is the amount of money in the account after t years

P is the principal amount (initial investment)

r is the annual interest rate (in decimal form)

n is the number of times the interest is compounded per year

t is the number of years

Plugging in these values into the formula, we get:

A = $10,000(1 + 0.09/1)^(1*6)

Simplifying the exponent:

A = $10,000(1 + 0.09)^6

Calculating the parentheses first:

A = $10,000(1.09)^6

Calculating the exponent:

A ≈ $10,000(1.6331950625)

Calculating the multiplication:

A ≈ $16,331.95

Therefore, the amount of money in the account after 6 years, with an annual interest rate of 9% compounded annually, is approximately $16,331.95.

learn more about "account ":- https://brainly.com/question/30101466

#SPJ11

a) This is because these are the only elements that are present in both sets a and b.

b) This is because the only element that is present in all three sets is 1.

c) This is because all the elements in all three sets are present in the union set.

d) This is because all the elements in all three sets are present in the union set.

e) This is because the elements in set a that are not present in set b are 5 and 6.

f) This is because the set difference of b and c is {2, 4}, and when we subtract that from set a, we get all the elements in a.

a) ∩ b) Intersection of sets a and b:

a ∩ b = {1, 3}

This is because these are the only elements that are present in both sets a and b.

b) ∩ ∩ c) Intersection of sets a, b, and c:

a ∩ b ∩ c = {1}

This is because the only element that is present in all three sets is 1.

c) ∪ d) Union of sets a, b, and c:

a ∪ b ∪ c = {1, 2, 3, 4, 5, 6}

This is because all the elements in all three sets are present in the union set.

d) ∪ ∪ e) Union of sets a, b, and c:

a ∪∪ b ∪∪ c = {1, 2, 3, 4, 5, 6}

This is because all the elements in all three sets are present in the union set.

e) a-b) Set difference between sets a and b:

a - b = {5, 6}

This is because the elements in set a that are not present in set b are 5 and 6.

f) a-(b-c)) Set difference between sets a and the set difference of b and c:

b - c = {2, 4}

a - (b - c) = {1, 3, 5, 6}

This is because the set difference of b and c is {2, 4}, and when we subtract that from set a, we get all the elements in a.

for such more question on Intersection

https://brainly.com/question/22008756

#SPJ11

The set {1, 2, 3,. . . , 15} consists of 15 elements. Therefore, the number of ways to choose 4–element subsets from this set will be given by the formula:

[tex]^{15}C_4[/tex]which is equal to [tex]\frac{15!}{4!(15-4)!}=1365[/tex]Now, let's count the number of 4-element Tthat contain consecutive integers. We can divide these subsets into 12 groups (since there are 12 pairs of consecutive integers in the set): {1,2,3,4}, {2,3,4,5}, ..., {12,13,14,15}. In each of these groups, there are 12 ways to choose 4 elements. Therefore, the total number of 4-element subsets that contain consecutive integers is $12\times12=144$.Hence, the number of 4–element subsets taken from the set {1, 2, 3,. . . , 15} that do not contain consecutive integers is given by:$\text{Total number of 4-element subsets}-\text{Number of 4-element subsets that contain consecutive integers}

[tex]= 1365-144 = \boxed{1221}[/tex]

To know more about subsets,visit:

https://brainly.com/question/28705656

#SPJ11

The Speed of the bottom of the ladder moving along the ground will be: 1.33 ft/s

When the ladder is 13 ft long and the bottom is 8 ft from the wall then by Pythagoras' theorem we determine the height of the wall where the ladder touches.

Giving x= 13 ft. If the ladder is falling with a speed of  5 ft/s

This shows that the bottom of the ladder will travel from 8ft to 10 ft in 1.5 seconds. the speed to be:

v = S / t

v = 2 / 1.5

v = 1.33 ft/s

Learn more about constant rate here:

https://brainly.com/question/28940745

#SPJ1

By using a t-table or calculator, we find that

(a) t0.025 = 2.145, (b) −t0.10 = -1.372, (c) t0.995 = 3.499.

These questions all involve finding critical values for t-distributions with different degrees of freedom (df).

(a) To find t0.025 when v = 14, we need to look up the value of t that leaves an area of 0.025 to the right of it under a t-distribution with 14 degrees of freedom. Using a t-table or calculator, we find that t0.025 = 2.145.

(b) To find −t0.10 when v = 10, we need to look up the value of t that leaves an area of 0.10 to the right of it under a t-distribution with 10 degrees of freedom, and then negate it. Using a t-table or calculator, we find that t0.10 = 1.372. Negating this value gives −t0.10 = -1.372.

(c) To find t0.995 when v = 7, we need to look up the value of t that leaves an area of 0.995 to the right of it under a t-distribution with 7 degrees of freedom. Using a t-table or calculator, we find that t0.995 = 3.499.

Learn more about "degrees of freedom":

https://brainly.com/question/28527491

#SPJ11

The car that is closest to Suzanne's original car is: 2008 Neon

Suzanne purchased a car with a list price of $23,860, traded in her previous Dodge in good condition, and financed the remaining cost for five years at 11.62% compounded monthly.

The dealer paid her 85% of the advertised trade-in value of the car.

She also covered 8.11% sales tax, a $1,695 vehicle registration fee, and a $228 paperwork fee.

The amount she lends is calculated as follows:

New car price is $23,860

Trade-in value of old vehicle = 85% of estimated trade-in value

Interest = 11.62%

Compounding periods = monthly

Suppose the advertised trade-in value of an old car is X. So she got her 85% of her X, or 0.85 times her.

Funding Amount = ($23,860 + $1,695 + $228) − 0.85X + 0.0811($23,860 − 0.85X)

You can use an amortization formula to calculate monthly payments.

M = P (r(1 + r)n) / ((1 + r)n − 1)

where:

P is the amount raised.

r is the monthly interest rate.

n is the number of payments.

Thus:

M = 225.55 (0.1162/12(1 + 0.1162/12)60) / ((1 + 0.1162/12)60 − 1)

M = $525.68

In other words, her monthly payment of $455.96 was less than her actual monthly payment of $525.68, which provided some discount or incentive for her car purchase.

So Suzanne's original car is a Dodge in good condition.

Read more about Amortization at: https://brainly.com/question/10561878

#SPJ4

If the volume of each storage box is 1.5 cubic feet, then the maximum number of boxes that can be loaded into the truck = 1458. Hence, Statement 2 is true.

Let the volume of a storage box be represented by V (cubic feet).

Statement 1: If the volume of each storage box is 1.5 cubic feet, then 4860 boxes can be loaded into the truck. False

Statement 2: If the volume of each storage box is 1.5 cubic feet, then 6480 boxes can be loaded into the truck. True

Given, the cargo hold of a truck is a rectangular prism measuring 18 feet by 13.5 feet by 9 feet.

Hence, its volume, V = lbh cubic feet

Volume of the truck cargo hold= 18 ft × 13.5 ft × 9 ft

= 2187 ft³

Let the volume of each storage box be represented by V (cubic feet).

If n storage boxes can be loaded into the truck, then volume of n boxes= nV cubic feet

Given, V = 1.5 cubic feet

Statement 1: If the volume of each storage box is 1.5 cubic feet, then the number of boxes that can be loaded into the truck = n

Let us assume this statement is true, then volume of n boxes = nV = 1.5n cubic feet

If n boxes can be loaded into the truck, then 1.5n cubic feet must be less than or equal to the volume of the truck cargo hold

i.e. 1.5n ≤ 2187

Dividing both sides by 1.5, we get:

n ≤ 1458

Therefore, if the volume of each storage box is 1.5 cubic feet, then the maximum number of boxes that can be loaded into the truck = 1458 (not 4860)

Hence, Statement 1 is false.

Statement 2:

If the volume of each storage box is 1.5 cubic feet, then the number of boxes that can be loaded into the truck = n

Let us assume this statement is true, then volume of n boxes = nV = 1.5n cubic feet

If n boxes can be loaded into the truck, then 1.5n cubic feet must be less than or equal to the volume of the truck cargo hold

i.e. 1.5n ≤ 2187

Dividing both sides by 1.5, we get:

n ≤ 1458

Therefore, if the volume of each storage box is 1.5 cubic feet, then the maximum number of boxes that can be loaded into the truck = 1458

Hence, Statement 2 is true.

To know more about volume visit:

https://brainly.com/question/28058531

#SPJ11

There cannot exist an activity ai that is in B but not in A. Hence, A and B are the same, and the algorithm that selects the last activity to start that is compatible with all previously selected activities yields an optimal solution.

The approach of selecting the last activity to start that is compatible with all previously selected activities is also a greedy algorithm that yields an optimal solution.

To see why this is true, consider the following:

Suppose we have a set of activities S that we want to select from. Let A be the set of activities selected by the algorithm that selects the last activity to start that is compatible with all previously selected activities. Let B be the set of activities selected by an optimal algorithm. We want to show that A and B are the same.

Let ai be the first activity in B that is not in A. Since B is optimal, there must exist a solution that includes ai and is at least as good as the solution A. Let S be the set of activities in A that precede ai in B.

Since ai is the first activity in B that is not in A, it must be that ai starts after the last activity in S finishes. Let aj be the last activity in S to finish.

Now consider the activity aj+1. Since aj+1 starts after aj finishes and ai starts after aj+1 finishes, it must be that ai and aj+1 are incompatible. This contradicts the assumption that B is a feasible solution, since it includes ai and aj+1.

Know more about algorithm here:

https://brainly.com/question/28724722

#SPJ11