Carbon monoxide ( co ) is toxic because it binds more strongly to the iron in hemoglobin ( hb ) than does oxygen ( o2 ), as indicated by the approximate standard gibbs energy changes for these reactions occurring in blood at 298 k :.

The mass of the baking soda is 4.5 g

A conversion factor is a ratio that is used to convert one unit of measurement to another. Conversion factors are commonly used in scientific calculations and in everyday life, when we need to convert one unit of measurement to another.

A conversion factor can be derived from the relationship between two different units of measurement.

Given that;

1 oz = 28.35 g

But

1 tsp = 0.212 oz

Thus;

0.750 tsp will be  0.750 tsp * 0.212 oz/1 tsp

= 0.159 oz

Then;

1 oz = 28.35 g

Thus;

0.159 oz =  0.159 oz * 28.35 g/ 1oz

= 4.5 g

Learn more about conversion factor:https://brainly.com/question/30166433

#SPJ1

Answer: The name of the following compounds are:

a. Magnesium nitride                                                                                                 b. Potassium Fluoride                                                                                                 c. Sodium Oxide                                                                                                               d. Lithium sulfide                                                                                                        e. Cesium Fluoride                                                                                                         f. Potassium iodide

Explanation:

The name of ionic compounds, Mg₃N₂ is magnesium nitride, KF is potassium fluoride, Na₂O is sodium oxide, Li₂S is lithium sulfide, CsF is cesium fluoride, and KI is potassium iodide.

Ionic compounds are compounds that are formed through the combination of positive and negative ions. They consist of a metal cation and a nonmetal anion. These compounds are held together by electrostatic forces, known as ionic bonds, resulting from the attraction between opposite charges.

The names of ionic compounds are often derived from the names of the constituent ions.

Learn more about ionic compounds, here:

https://brainly.com/question/30420333

#SPJ6

The 125 moles of NaCl or sodium chloride solution in 4 l solution will have molarity 31.25 M.

The molarity of any solution is given by the formula - Molarity = number of moles ÷ volume of solution in litres.

In this question, we have the required values which are number of moles and volume of solution in litre. Therefore, keeping the values in formula to find the molarity of solution.

Molarity = 125/4

Now perform the division of values stated on Right Hand Side of the above mentioned equation

Molarity = 31.25 M

Thus, the molarity of solution is 31.25 M.

Learn more about molarity -

https://brainly.com/question/14469428

#SPJ4

Granulocytes are leukocytes that have visible granules and agranulocytes are leukocytes that don't have visible granules.

Leukocytes, widely known as white blood cells, are blood cells that lack haemoglobin, have nucleus, and can move. They protect the body from disease and infection by swallowing foreign objects and cell debris, eradicating infectious agents, killing cancer cells, or manufacturing antibodies. Bone marrow produces white blood cells, and organs like the kidneys, liver, and spleen control how much of them are generated at any given time.

The two categories of white blood cells, are granulocytes and agranulocytes.

Agranulocytes lack cytoplasmic granules or sacs, whereas granulocytes do. In the battle against infection and disease, each type of granulocyte and agranulocyte serves different function.

Basophils, neutrophils, and eosinophils are the three different types of granulocytes.

To know more about haemoglobin, visit:

https://brainly.com/question/517799

#SPJ1

Answer:

The overall balanced chemical equation for the reaction is: 3O3 → 3O2 + O b. The intermediate in the mechanism is O3. c. The order of the reaction is first order with respect to O3 and second order with respect to O. d. The rate law for the overall reaction is rate = k[O3]^1[O]^2.

The 0.0500 M HNO2 solution has a pH of 1.81 and a 44.5% ionisation percentage.

A solution's acidity or basicity is determined by its pH. It is described as the solution's hydrogen ion concentration's negative logarithm. While lower pH values denote acidity and higher ones denote basicity, a pH of 7 is regarded as neutral.

Since HNO2 is a weak acid, the percent ionisation and pH of the solution can be determined using the acid dissociation constant (Ka) formula.

Ka = (H+)(NO2-)/(HNO2)

We can write: Ka = x2 /, where x is the concentration of H+ and NO2- and (0.0500-x) is the concentration of HNO2 (0.0500 - x)

The quadratic formula is used to solve for x, and the result is x = 0.0154 M

For these reasons, [H+] = [NO2-] = 0.0154 M and [HNO2] = 0.0346 M.

We apply the formula: to determine the % ionisation.

% ionisation is calculated as [H+]/[HNO2] x 100%, or (0.0154 / 0.0346) x 100, or 44.5%

We use the following formula to determine pH:

pH = -log(0.0154) = 1.81 where pH = -log(H+)

As a result, the 0.0500 M HNO2 solution has a pH of 1.81 and a 44.5% ionisation percentage.

Learn more about pH here:

brainly.com/question/15289741

#SPJ1

Therefore, the maximum theoretical yield of LiCl in moles is 0.0168 mol.

In the context of chemistry, a reaction refers to a process in which one or more substances, known as reactants, undergo a chemical change to form one or more new substances, known as products. During a chemical reaction, chemical bonds between atoms in the reactants are broken and new bonds are formed to create the products. Reactions can be classified into different types, including synthesis (combination), decomposition, single replacement, double replacement, and combustion reactions. The study of chemical reactions is fundamental to understanding the behavior of matter and its interactions in the natural world, as well as in many important practical applications, such as medicine, energy production, and materials science.

Here,

The unbalanced equation is:

Li2CO3 + HCl → LiCl + CO2 + H2O

To balance the equation, we need to add a coefficient of 2 in front of HCl:

Li2CO3 + 2HCl → 2LiCl + CO2 + H2O

The balanced equation tells us that 1 mole of Li2CO3 reacts with 2 moles of HCl to produce 2 moles of LiCl.

First, we need to calculate the number of moles of Li2CO3:

moles of Li2CO3 = mass / molar mass

moles of Li2CO3 = 0.62 g / 73.89 g/mol

moles of Li2CO3 = 0.0084 mol

According to the balanced equation, 1 mole of Li2CO3 produces 2 moles of LiCl. Therefore, the maximum theoretical yield of LiCl can be calculated as follows:

moles of LiCl = 2 × moles of Li2CO3

moles of LiCl = 2 × 0.0084 mol

moles of LiCl = 0.0168 mol

To know more about reaction,

https://brainly.com/question/30564957

#SPJ1

The concept Arrhenius equation is used here to determine the frequency factor for the reaction. Here for the given reaction, the frequency factor is 3.814.

The Arrhenius equation explains the relationship between the activation energy and rate of the reaction. The lower the activation energy, higher will be the rate of reaction. The equation is:

[tex]k=A . e^{-E_{a} } / RT[/tex]

k - rate constant

A - frequency factor

Eₐ - activation energy

R - Gas constant

T - Temperature in Kelvin

261 kJ per mole = 261000 J/mol

325°C + 273 = 598 K

6.1 × 10⁻⁸ = A . e⁻261000/ 8.314 × 598

A = 3.814

Thus the frequency factor for the reaction is 3.814.

To know more about frequency factor, visit;

https://brainly.com/question/26605809

#SPJ1

C. Weak acids are only partially ionized in an aqueous solution. When a weak acid is dissolved in water, only a fraction of the acid molecules will donate a proton to water to form hydronium ions, resulting in a solution with a lower concentration of hydronium ions and a higher pH compared to a strong acid with the same concentration.

What is Aqueous Solution?

An aqueous solution is a solution in which the solvent is water. In such a solution, water molecules surround and interact with the solute ions or molecules. Aqueous solutions are very common in nature and are widely used in chemistry, biology, and industry. For example, the fluids in our bodies are aqueous solutions, and many chemical reactions occur in aqueous solutions. The properties of aqueous solutions, such as their acidity or alkalinity, electrical conductivity, and freezing point, depend on the nature and concentration of the solute dissolved in the water.

Weak acids are substances that do not completely dissociate into ions in aqueous solutions. Instead, they exist as a mixture of ions and undissociated molecules in a dynamic equilibrium. This means that only a fraction of the acid molecules dissociate into their respective ions, while the rest remain undissociated.

Because of this partial dissociation, waek acids are not strong sources of hydronium ions (H3O+), which determine the pH of a solution. Instead, they provide a buffer system that can help resist changes in pH when small amounts of acid or base are added to the solution.

Learn more about  Aqueous Solution from given link

https://brainly.com/question/19587902

#SPJ1

The number of atoms of titanium in 1.67 moles of each compound is calculated below.

We can use Avogadro's number to convert moles of each compound to the number of atoms of titanium in each compound. Avogadro's number is approximately 6.022 x 10^23 particles per mole.

FeTiO3 contains one atom of titanium per formula unit.

Number of moles of ilmenite = 1.67 mol

Number of atoms of titanium in 1.67 mol of ilmenite = 1.67 mol x (6.022 x 10^23 atoms/mol) = 1.005 x 10^24 atoms of titanium.

TiCl4 contains one atom of titanium per molecule.

Number of moles of TiCl4 = 1.67 mol

Number of molecules of TiCl4 in 1.67 mol = 1.67 mol x (6.022 x 10^23 molecules/mol) = 1.006 x 10^24 molecules

Number of atoms of titanium in 1.67 mol of TiCl4 = 1.006 x 10^24 molecules x 1 atom/molecule = 1.006 x 10^24 atoms of titanium.

One molecule of Ti3O5, there are 3 titanium atoms and 5 oxygen atoms.

Number of titanium atoms in 1.67 moles of Ti3O5 = (3 Ti atoms/molecule) x (1.67 moles) x (6.022 × 10^23 atoms/mole) = 1.0 x 10^24 Ti atoms.

One molecule of Ti2O3, there are 2 titanium atoms and 3 oxygen atoms.

Number of titanium atoms in 1.67 moles of Ti2O3 = (2 Ti atoms/molecule) x (1.67 moles) x (6.022 × 10^23 atoms/mole) = 2.0 x 10^24 Ti atoms

More on the number of atoms in moles can be found here: https://brainly.com/question/12513822

#SPJ1

The heat capacity is obtained from; c= q/mdT

Specific heat is the amount of heat energy required to raise the temperature of one unit mass of a substance by one degree Celsius (or one degree Kelvin) without a change in state. It is a property of a substance that depends on its chemical composition and molecular structure.

The specific heat of a substance is usually measured in units of joules per kilogram per degree Celsius (J/kg°C) or in calories per gram per degree Celsius (cal/g°C). The specific heat of a substance can be measured experimentally by heating a known mass of the substance and measuring the amount of heat energy required to raise its temperature by a certain amount.

Since the question is incomplete and the values are missing, We can see that the specific heat can be obtained when it is made the subject of the formula as shown below.

We now know that;

q=mcdT

Then c is obtained from;

c= q/mdT

Learn more about heat capacity:https://brainly.com/question/28302909

#SPJ1

The release of heat energy and the formation of water (H2O) indicate a release of bond energy.

Heat energy is the energy transferred between two objects or systems that have different temperatures. It is a form of energy that is created when molecules move faster, creating kinetic energy in the form of heat. Heat energy is transferred by conduction, convection, and radiation. Conduction is the transfer of heat energy through direct contact between two objects. Convection is the transfer of heat energy through the movement of a fluid, such as air or water. Radiation is the transfer of heat energy through electromagnetic waves. Heat energy is used in many applications, including cooking, heating, and power generation.

To learn more about heat energy
https://brainly.com/question/19666326
#SPJ1

Both chemical reactions X and Y are possible because there are two reactants and one product in synthesis reaction

What is true about synthesis reaction?

When two or more reactants are present, a synthesis reaction produces a single product that is more complex than the initial reactants.

This kind of reaction is described by the general equation A + B = AB. Synthesis reactions are those in which two reactants combine to form a chemical. Synthesis reactions involve the chemical mixing of two or more substances to create a single compound or end product.

To know more about synthesis reaction characteristics, visit :

brainly.com/question/26362040

#SPJ1

To obtain  experimental measurements with maximum accuracy one should select a liquid with a larger value of Kf as there should be larger difference in depression in freezing point.

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Learn more about accuracy,here:

https://brainly.com/question/13099041

#SPJ1

Option (d) is correct. The total number of grams of sodium hydroxide needed to make 1. 0 liter of a 0. 20 m solution is 8.0 gram. It is calculated using the expression of molarity.  

Molarity is defined as the ratio of solute moles and solution length. We can obtain the acid solution molarity by dividing the amount of moles  of the solution in which it was dissolved. It is a measure of the concentration of a chemical species, in particular of a solute in a solution in terms of amount of substance per unit volume of solution. It can be expressed as,

Molarity = Moles / volume in liter

So the moles of sodium hydroxide = 0.2 mole

The Mole of sodium hydroxide is 0.2 mole and Molar mass of sodium hydroxide is 40 g/mole. We have to determine the mass of sodium hydroxide.

Mass is the product of the moles and the molar mass. It can be expressed as,

mass = moles * molar mass

          = 0.2 * 40

          = 8 gram

To learn more about Molarity

https://brainly.com/question/26873446

#SPJ4

The complete question is,

What is the total number of grams of NaOH (formula mass = 40.) needed to make 1.0 liter of a 0.20 M solution?

(1) 20. g (2) 2.0 g (3) 80. g (4) 8.0 g​

Answer:

Explanation:

u arevery call

The expressions for the rates of appearance of I₂ and NO are d[I₂] /dt and d[NO]/ dt. This is according to the chemical equilibrium.

The rate of appearance is defined as a positive quantity. The rate of appearance of a product is equals to the rate of disappearance of a reactant. chemical equilibrium is defined as the state in which both the reactants and products are present in concentrations which have no further tendency to change with time. It is a condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs. A reversible chemical reaction is defined as the reaction in which the products as soon as they are formed, react to produce the original reactants.

To learn more about Rate of appearance

https://brainly.com/question/30578902

#SPJ4

The complete question is,

Given the balanced chemical equation for the decomposition for INO, and the rate of disappearance of INO, write the expressions for the rates of appearance of I2 and NO.

2INO(g) → I2(g) + 2NO(g)

The pH at the equivalence point in the titration of 50.0 ml of 0.300 M CH₃COOH with 0.3 M NaOH is 8.61.

At the equivalence point in the titration of CH₃COOH with NaOH, the pH is determined by the hydrolysis of the salt formed, which is CH3COO⁻ and Na+.

The equation for the hydrolysis reaction is:

CH3COO⁻ + H2O ⇌ CH3COOH + OH⁻
We can use the Ka value for CH₃COOH to find the Kb value for CH3COO⁻ using the equation:

Kw = Ka x Kb

Where Kw is the ion product constant for water (1.0 x 10⁻¹⁴).
Kb = Kw/Ka

= (1.0 x 10⁻¹⁴)/(1.8 x 10⁻⁵)

= 5.56 x 10⁻¹⁰
Now we can use the Kb value to find the concentration of OH⁻ at the equivalence point using the equation:

Kb = ([OH⁻][CH3COOH])/[CH3COO⁻].

Since the concentrations of CH3COOH and CH3COO⁻ are equal at the equivalence point, we can simplify the equation to Kb = ([OH⁻]²)/[CH₃COO⁻].
Hence,
[OH-] = [tex]\sqrt{Kb(CH3COO-)}[/tex]

=[tex]\sqrt{5.56(10^{-10})(0.3) }[/tex]

= 4.06 x 10⁻⁶ M
Use the concentration of OH⁻ to find the pH at the equivalence point using the equation pOH = -log[OH-] and the relationship pH + pOH = 14.
pOH = -log(4.06 x 10⁻⁶)

= 5.39
pH = 14 - 5.39

= 8.61
Therefore, the pH at the equivalence point in the titration of 50.0 ml of 0.300 M CH3COOH with 0.3 M NaOH is 8.61.

Learn more about pH here: https://brainly.com/question/172153

#SPJ11

Answer:

2.637 L

Explanation:

The volume of oxygen O2 found in 41.1 grams of oxygen at STP can be calculated using the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles of oxygen, R is the ideal gas constant, and T is the temperature.

Using the molar mass of oxygen, which is 32 g/mol, we can calculate the number of moles of oxygen in 41.1 g of oxygen:

n = 41.1 g/ 32 g/mol = 1.28125 moles

At STP, the pressure is 101.325 kPa and the temperature is 273.15 K. Plugging these values into the ideal gas law equation gives us:

V = (1.28125 mol)(0.08206 L•atm/mol•K)(273.15 K) / (101.325 kPa) = 2.637 L

The solubility of the solute in the solvent depends on intermolecular interactions.

The nature of the solute and the solvent alone determines how soluble they are in a solvent. In a polar solvent, a polar solute dissolves. In a non-polar solvent, a polar solute is poorly soluble. In a non-polar solvent, a non-polar solute dissolves.

Since the question is incomplete, we can not see what the solute or the solvent ought to have been. However, we must know that the solubility of the solute in the solvent must depend on intermolecular interactions between the both.

Learn more about solute:https://brainly.com/question/1202167

#SPJ1

In comparison to cyclohexane, those following will be much more soluble in water.

The majority of cyclohexane is used to make thermoplastic intermediates and other typical uses for nylon, including garments, tents, and carpets. In recent years, benzene has been replaced by cyclohexane in many applications and is still utilized as a solvent in industrial and chemical operations.

Consuming cyclohexane could upset your stomach. At cyclohexane concentrations typically present in the environment, these effects are unlikely to manifest. The skin may become irritated if cyclohexane is spilled on it. Skin dryness and cracking may result from prolonged or repetitive skin contact.

To know more about Cyclohexane visit:

https://brainly.com/question/17019157

#SPJ1

917Kg/m³ is the density of 50,000 m³ iceberg of mass of 45,850,000kg. Grams per cubic centimeter are a typical unit of measurement for density.

Density is the mass of a specific material per unit volume. d = M/V, in which d is density, M is weight, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density. For instance, whereas Earth has a density of 5.51 grams per square centimeter, water has a density of 1 gram per cubic centimeter.

Another way to state density is in kilograms per cubic meter. For instance, air weighs 1.2 pounds per cubic metre. In textbooks and manuals, the densities of typical solids, liquids, as well as gases are stated.

density= mass/ volume

         = 45,850,000 /50,000

         = 917Kg/m³

Therefore, 917Kg/m³ is the density of 50,000 m³ iceberg of mass of 45,850,000kg.

To learn more about density, here:

https://brainly.com/question/29775886

#SPJ9

The freezing point depression table is filled as follows:

1. Solution = Sucrose

Lowest Temperature °C = -7.9

1st Trial °C Freezing Point = -1.6

2nd Trial °C Freezing Point = 1.6

ΔTf °C = 1.6

2. Solution = Water

Lowest Temperature °C = -8.0

1st Trial °C Freezing Point = 0.0

2nd Trial °C Freezing Point = 0.0

ΔTf °C = 0.0

Freezing point depression is a phenomenon that occurs when the freezing point of a solvent is lowered by the presence of a solute.

When a solute is dissolved in a solvent, the solute molecules or ions occupy the spaces between the solvent molecules. This makes it harder for the solvent molecules to form a solid lattice structure, which is required for freezing, and as a result, the freezing point of the solvent is lowered.

Learn more about freezing point depression at: https://brainly.com/question/30531587

#SPJ1

14 mole  of Fe will react with 9.3 mole of oxygen and produce 4.2mole of Fe[tex]_3[/tex]O[tex]_4[/tex]. The mole signifies  6.022×10²³ units, which is a very big quantity.

In chemistry, a mole, sometimes spelt mol, is a common scientific measurement unit for significant amounts of extremely small objects like atoms, molecules, and other predetermined particles. The mole signifies  6.022×10²³ units, which is a very big quantity.

Under the International System of Units (SI), the mole is defined as this quantity as of May 20, 2019, according the General Conference upon Weights and Measurements. The amount of atoms discovered via experimentation to be present in 12 kilograms of carbon-12 was originally used to define the mole. 

3 Fe + 2 O[tex]_2[/tex]→ Fe[tex]_3[/tex]O[tex]_4[/tex]

The ratio among Fe, oxygen and Fe[tex]_3[/tex]O[tex]_4[/tex] is 3:2:1

1 mole of Fe reacts with 2/3mole of oxygen

14 mole of Fe reacts with (2/3)×14=9.3 mole of oxygen

1 mole of Fe reacts with 1/3mole of Fe[tex]_3[/tex]O[tex]_4[/tex]

14 mole  of Fe reacts with (1/3)×14=4.2mole of Fe[tex]_3[/tex]O[tex]_4[/tex]

Therefore, 14 mole  of Fe will react with 9.3 mole of oxygen and produce 4.2mole of Fe[tex]_3[/tex]O[tex]_4[/tex].

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ9

The molecular formula of a compound is the whole number multiple of its empirical formula. The empirical formula of the unknown compound is CH₂O₂.

The empirical formula of a compound can be defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound.

The molecular formula of a compound gives the actual number of atoms of various elements present in one molecule of the compound.

Moles, n = Given mass / Molar mass

'n' of C = 0.3911 / 12 = 0.032

'n' of H = 0.0654 / 1 = 0.0654

'n' of O = 1.0437 / 16 = 0.0652

Divide'n' values by 0.03 to get whole numbers.

C = 1

H = 2

O = 2

Thus the empirical formula of the compound is CH₂O₂.

To know more about empirical formula, visit;

https://brainly.com/question/14044066

#SPJ9

To determine how different medicines will affect her, the lab tested several genes that contain coding for certain traits, including allergies to medications. This genetic material is on structures called chromosomes that get passed on from generation to generation.

To determine how different medicines will affect a person, genetic testing can be conducted to analyze specific traits and potential allergies to certain medications.

In the context of genetic testing, chromosomes are typically analyzed to look for genetic variations or mutations that may impact the way an individual metabolizes certain medications.

The genetic material that contains information about traits and allergies is carried on structures called genes, which are located on chromosomes.

Find out more on chromosomes at https://brainly.com/question/11912112

#SPJ1

Answer:

when 445 grams of H2O are reacted, 4,300 grams (or 4.3 kilograms) of MnO2 are produced.

Explanation:

The balanced chemical equation for the reaction is:

16H+ (aq) + 2MnO4- (aq) + 10Br- (aq) → 2MnO2 (s) + 5Br2 (aq) + 8H2O (l)

According to the equation, 2 moles of MnO4- react to produce 2 moles of MnO2. Therefore, we need to find out the number of moles of MnO4- that react with the given amount of H2O and then use stoichiometry to calculate the number of moles of MnO2 produced.

First, let's calculate the number of moles of H2O:

mass of H2O = 445 g

molar mass of H2O = 18.015 g/mol

number of moles of H2O = mass/molar mass = 445 g/18.015 g/mol = 24.7 mol

From the balanced equation, we can see that 1 mole of H2O reacts with 2 moles of MnO4-. Therefore, the number of moles of MnO4- required to react with 24.7 mol of H2O is:

number of moles of MnO4- = 2 × number of moles of H2O = 49.4 mol

Since 2 moles of MnO4- produce 2 moles of MnO2, we can say that 1 mole of MnO4- produces 1 mole of MnO2. Therefore, the number of moles of MnO2 produced is also 49.4 mol.

Finally, we can calculate the mass of MnO2 produced:

mass of MnO2 = number of moles of MnO2 × molar mass of MnO2

mass of MnO2 = 49.4 mol × 86.94 g/mol = 4,300 g

Therefore, when 445 grams of H2O are reacted, 4,300 grams (or 4.3 kilograms) of MnO2 are produced.

-1113.5kJ is the theoretical enthalpy of combustion.

What makes energy different from enthalpy?

The entire amount of heat energy that is either absorbed or released in a thermodynamic system is measured by enthalpy. Internal energy denotes all of the potential or moving energy present in a thermodynamic system.

Enthalpy of combustion is the term used to describe the change in a system's enthalpy that occurs when one mole of a substance fully burns in oxygen or air at a specific temperature.

C₂H5OH()+302(g) → 2CO2(g) + 3H₂O(1)

Reactants:

5 C-H : 5*412

1 C-C : 348

1 C-O: 358

3 O=O: 3* 496

1 O-H: 463

Products:

2*2 C=O : 4*743

2*3 O-H: 6*463

Enthalpy of Vaporization (kJ mol-¹) for :

Ethanol 42.5

Water 41​

Enthalpy of combustion : (5*412 + 348 + 358 + 3* 496 + 463 + 42.5) - ( 3*41 + 4*743 + 6*463)    

                                        : -1113.5kJ

To learn more about enthalpy use :

https://brainly.com/question/5374936

#SPJ1

The approximate height of the barrel is 22.9 inches. They are also important in mathematics and engineering, as they are used to model and solve problems in various fields, such as calculus, geometry, physics, and fluid mechanics.

What is Cylinder?

A cylinder is a three-dimensional geometric shape that consists of two parallel, congruent circular bases connected by a curved surface. The curved surface is composed of a set of parallel lines that connect the two circular bases.

The cylinder can be described by several measurements, including its height (the distance between the two circular bases), its radius (the distance from the center of one circular base to its edge), and its diameter (the distance across the cylinder at its widest point, passing through the center of the circular bases).

We can use the formula for the volume of a cylinder to find the height of the barrel:

V = πr²h

We are given that the volume of the oil is 10,164 cubic inches and the diameter (which is twice the radius) is 23 inches.

r = 23/2 = 11.5 inches

10,164 = π(11.5)²h

Solving for h, we get:

h = 10,164 / (π(11.5)²) ≈ 22.9 inches

So the approximate height of the barrel is 22.9 inches.

Learn more about Cylinder from given link

https://brainly.com/question/27440983

#SPJ1