Complete the photosynthesis reactions by placing the following items as reactants, energy sources, or products of these reactions. Not all labels will be placed.
6CO2 + 6H2O = C6H12O6 + ....
Energy source: ....

A 183 g sample of bleach contains 14.0 g NaOCl. 7.65% is the mass percent of NaOCl in the bleach.

Mass percent is the means to indicate a concentration. Moreover, it defines the element in a certain composition. A mass percentage can be used to understand the solution's composition.

It displays the amount of solute in a certain amount of solution. The solute's concentration is specified in terms of mass or moles. It's possible to represent a degree using the mass percent. Also, it describes the element during a certain mixing.

mass percent = (solute mass / mass of solution)×100

mass percent = (14.0 / 183)×100 = 7.65%

Therefore, 7.65% is the mass percent of NaOCl in the bleach.

To learn more about mass percent, here:

https://brainly.com/question/14990953

#SPJ1

A positively charged ion called a cation is created when an atom loses one or more electrons.

The process of ionization is when an atom or molecule loses or gains an electron, resulting in the formation of an ion. An anion is created when a molecule or atom obtains an electron; a cation is created when an electron is lost (a cation).

Three subatomic particles exist: protons, neutrons, and electrons. Protons have a positive charge, while electrons have a negative charge, making up two of the subatomic particles. Instead of having a charge, neutrons are neutral.

To know more about cation visit :-

https://brainly.com/question/1626694

#SPJ4

When you try to heat up a substance that has a high specific heat, it will require a lot of energy to raise its temperature. This is because substances with high specific heat have a greater ability to absorb heat energy without undergoing a significant temperature change.

For example, water has a high specific heat, which means it can absorb a lot of heat energy before its temperature increases significantly. This is why water is commonly used to regulate temperature in various applications, such as in cooling systems or in living organisms that need to maintain a stable internal temperature.

So, if you try to heat up a substance with a high specific heat, you will need to supply a large amount of heat energy to cause a noticeable increase in temperature. Conversely, if you try to cool down the same substance, it will release a large amount of heat energy before its temperature decreases significantly.

Specific heat is the amount of heat energy required to raise the temperature of a substance by a certain amount, usually one degree Celsius or Kelvin. Different substances have different specific heat values, and these values depend on the physical and chemical properties of the substance.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

Two cyclic AMP molecules are required to activate protein kinase A, an enzyme that plays a crucial role in cellular processes.

Protein kinase An is a catalyst that assumes a vital part in numerous cell processes, including digestion, quality articulation, and cell division. Its movement is controlled by cyclic AMP (cAMP), a little particle that ties to the administrative subunits of protein kinase An and discharges the synergist subunits. Two cAMP particles are expected to enact protein kinase A by restricting to every one of the two administrative subunits, causing a conformational change that delivers the reactant subunits, which can then phosphorylate target proteins. The degree of cAMP in cells is directed by different flagging pathways and chemicals, permitting protein kinase A to answer changes in the cell's current circumstance and direction cell reactions.

To learn more about protein kinase A, refer:

https://brainly.com/question/30287632

#SPJ4

Answer:

Explanation:

Consider the stoichiometry of the reaction, which is the ratio of reactant particles to product particles in the reaction. So in this reaction, the stoichiometry is:

2 : 1 : 2 : 2

Therefore, if you have 30 moles of water, than you have 30 moles of sodium hydroxide, 15 moles (30÷2) of hydrogen gas, and 30 moles of sodium.

The molecular formula of the compound is (CH)6 or C6H6

To determine the molecular formula of a compound from its percentage composition and molar mass, we can follow these steps:

Convert the percentage composition of each element into its corresponding mass.

The compound contains 92.3% C and 7.7% H. Assuming a 100-g sample of the compound, the mass of C is:92.3 g C = (92.3/100) x 100 g sample = 92.3 g

The mass of H is:

7.7 g H = (7.7/100) x 100 g sample = 7.7 g

Calculate the number of moles of each element

The number of moles of C is:

n(C) = m(C) / M(C)

n(C) = 92.3 g / 12.01 g/mol = 7.689 moles

The number of moles of H is:

n(H) = m(H) / M(H)

n(H) = 7.7 g / 1.008 g/mol = 7.639 moles

Divide the number of moles of each element by the smallest number to obtain the simplest whole-number ratio of the elements.

Dividing both values by 7.639, we get:

n(C) = 1.007

n(H) = 1.000

Rounding these values to the nearest whole number, we get:

Therefore, the empirical formula of the compound is CH.

Now, we need to determine the molecular formula by finding the factor by which the empirical formula must be multiplied to get the molar mass of 78.1 g/mol.

The molar mass of the empirical formula CH is 12.01 g/mol + 1.01 g/mol = 13.02 g/mol.

Dividing the molar mass of the compound by the molar mass of the empirical formula gives us the factor by which the empirical formula must be multiplied:

78.1 g/mol ÷ 13.02 g/mol ≈ 6

Therefore, the molecular formula of the compound is (CH)6 or C6H6 after getting the empirical formula.

Learn more about molecular formula below.

https://brainly.com/question/26388921

#SPJ1

Answer:

lewis structures :

Explanation:

4 electrons

6 electrons outer shell

3 outer shell

2 outer shell

7 outer shell

1 outer shell.

v

When enzymes bind to substrates, they change conformation.the induced fit model

Like a key in a lock, substrates and enzymes work together seamlessly.

lock-and-key design

A complementary active site is created in the enzyme through a conformational shift brought on by the interaction of the substrate.

the induced fit model

Van der Waals forces and hydrogen bonds, for example, are weak, non-specific forces that mediate interactions between enzymes and substrates.

shared by both models. The active site of the enzyme is already configured properly to bind the substrate with great specificity.

Because enzymes can adapt the shape of their active site to match various substrates, they can catalyse a wide variety of processes.

Learn more about enzymes:
https://brainly.com/question/17292676

#SPJ4

The H-NMR spectrum of 2-methylcyclohexanol would typically show at least three different H signals, corresponding to the OH proton, the methyl group, and the ring protons.

The nuclear magnetic resonance (NMR) spectrum is a spectroscopic technique used to determine the molecular structure of a compound by analyzing the magnetic properties of its atomic nuclei.

In proton nuclear magnetic resonance (H-NMR) spectroscopy, the magnetic properties of the hydrogen nuclei (protons) in a molecule are measured. The technique is based on the principle that when a molecule is placed in a strong magnetic field, the protons align themselves either with or against the magnetic field, resulting in two possible spin states.

In the proton nuclear magnetic resonance (H-NMR) spectrum of 2-methylcyclohexanol, the number of different H signals (peaks) observed depends on the different types of proton environments present in the molecule.

2-methylcyclohexanol has several types of protons, which will produce distinct peaks in the H-NMR spectrum:

The OH proton will appear as a broad peak around δ 2.5-5.0 ppm due to its exchange with solvent protons.

The methyl (CH3) group on the cyclohexane ring will produce a singlet peak around δ 0.9-1.0 ppm.

The five protons on the cyclohexane ring will produce a complex splitting pattern, depending on their position and neighboring atoms.

In general, if the methyl group is located in an equatorial position, the ring protons will appear as two triplets (due to coupling with the neighboring axial protons) and one multiplet (due to coupling with the other ring protons). If the methyl group is located in an axial position, the ring protons will appear as a broad multiplet.

Therefore, the H-NMR spectrum of 2-methylcyclohexanol would typically show at least three different H signals, corresponding to the OH proton, the methyl group, and the ring protons.

To know more about spectroscopic technique, visit:

https://brainly.com/question/17140192

#SPJ1

Stitch, also known as Project 626, is one of the two main characters in the Lilo & Stitch franchise and a genetic experiment that Jumba Jookiba conducted without permission.

This is a list of the Disney cartoon Lilo & Stitch franchise's experiments, the majority of which debuted in Lilo & Stitch: The Series. These fictitious studies, also known as Stitch's cousins, are genetically modified creatures made by Dr. Jumba Jookiba in his laboratory at "Galaxy Defense Industries," with the help of Dr. Jacques von Hämsterviel, who provided funding for the projects through "shady" business agreements.

Every experiment conducted before the events of Lilo & Stitch was dried into a tiny ball called a "experiment pod" and transported in a specific container. The container in Stitch! The Movie was unintentionally opened, letting the pods fall on Kauai. Because many of the experiments are risky and Kauai is among the wettest places on Earth, it is concerning that the experiments inside the pods reactivate when they come into touch with water.

Each experiment is given a name when it is encountered by Stitch's human friend and partner Lilo, just as she did for Stitch. The two then make an effort to save the experiments and provide them a use on Earth that is appropriate for their unique skills, referred to as the "one true place" they belong.

Stitch refers to the other experiments as his "cousins" and views them as all being a part of his ohana, or "extended family," taking terminology from Hawaii. In Leroy & Stitch, the credits include names and numbers for each of Jumba's original 626 experiments.

To know more about genetics experiments, visit:https://brainly.com/question/7265749

#SPJ4

When the temperature conversion function =CONVERT(-22, "C", "F") is applied, a reading of -22 °C in Fahrenheit is displayed. On a variety of scales, including the Fahrenheit and Celsius systems, temperature is a unit that is used to denote hotness or coolness.

Heat energy will logically go from a hotter (body with a higher temperature) to a colder (body with a lower temperature) according to temperature (one at a lower temperature).

A temperature is a measurement used to express how hot or cold something is. It demonstrates how heat energy naturally flows from a hotter body to a cooler body and can be expressed in terms of any number of arbitrary scales (one at a lower temperature).

A match is burning at a far greater temperature than an iceberg, yet an iceberg has a significantly higher total heat energy than a match. Temperature is not the same as the energy of a thermodynamic system.

The temperature, along with pressure, density, and other similar properties, is referred to as an intense property as opposed to extensive characteristics like mass or volume—one that is independent of the quantity of stuff being addressed.

To know more about temperature:

brainly.com/question/23411503

#SPJ4

The CO₂ does to the brain is CO₂ increases the brain excitability and the Severe hypercapnia can cause the organ or the brain to damage.

The CO₂ that is the carbon dioxide is increase the brain excitability. The higher value of the CO₂ will cause the severe hypercapnia and it will cause the organ and the brain to damage and it will lead to the death.

The hypocapnia that is the  low level of the CO₂ , that will reduces the blood flow in the brain by the narrowing the blood vessels. The Hyperoxia can also alters the speed of the heart rate and the blood pressure and the blood levels of the some of the hormones.

To learn more about  CO₂ here

https://brainly.com/question/30194690

#SPJ4

The initial event when an action potential propagates to a neighboring patch of membrane in an unmyelinated axon is the opening of voltage-gated sodium channels in the neighboring patch of membrane. Option A is correct.

This results in depolarization of the neighboring patch of membrane and the propagation of the action potential. Depolarization refers to a change in the electrical potential of a cell membrane, such that the inside of the cell becomes less negative (or even positive) relative to the outside.

This change in membrane potential is caused by the movement of ions, such as sodium (Na⁺) or calcium (Ca²⁺), into the cell, or the movement of potassium (K⁺) out of the cell.

An unmyelinated axon is a type of nerve fiber in which the axon is not covered by a myelin sheath. In unmyelinated axons, the action potential propagates continuously along the entire length of the axon, with no interruption or delay.

Hence, A. opening of the voltage-gated sodium channels in the neighboring patch of membrane is the correct option.

To know more about unmyelinated axon here

https://brainly.com/question/21592989

#SPJ4

Aldehydes that contain at least one alpha hydrogen atom can undergo Aldol condensation and Cannizzaro reaction.

As per the question given,  

In Aldol condensation, two aldehyde or ketone molecules react in the presence of a base to form a beta-hydroxy carbonyl compound. The reaction involves the removal of a water molecule from the alpha-carbon and carbonyl group of two aldehydes or ketones. This reaction produces Aldol, which can undergo dehydration to form an alpha-beta-unsaturated carbonyl compound.

On the other hand, in the Cannizzaro reaction, an aldehyde molecule undergoes self-oxidation and reduction in the presence of a strong base to give an alcohol and a carboxylic acid. The reaction involves the loss of a hydrogen atom from the aldehyde, which gets reduced to an alcohol, and the reduction of the other aldehyde molecule to a carboxylic acid.

Therefore, aldehydes containing at least one alpha hydrogen atom can undergo Aldol condensation and Cannizzaro reaction.

For such more questions on Aldol condensation

https://brainly.com/question/27178362

#SPJ4

1-(1-phenylcyclohexyl) piperidine hydrochloride (PCP) was patented as Sernyl and first tested as a dissociative anesthetic.

The main way that 1-(1-Phenylcyclohexyl)piperidine hydrochloride (PCP) affects the central nervous system is either by stimulating it or by depressing it. The signs and symptoms can differ greatly depending on the animal species and dosage. Rats and mice exhibit hyperactivity more conspicuously, and at all dose levels, these animals can also exhibit some signs of central depression, which include a loss of limb muscle coordination.

At low doses, PCP has a calming or quieting effect on pigeons, guinea pigs, hamsters, rabbits, cats, dogs, and monkeys, while at higher doses, it causes a cataleptoid reaction to general anesthesia. Pigeons, guinea pigs, dogs, and monkeys that receive PCP at dosages greater than those used for general anesthesia experience convulsive seizures. Contrarily, convulsion or exhilaration are not immediately apparent.

Learn more about PCP:

https://brainly.com/question/28304545

#SPJ4

The Molar mass concept helps to determine the moles of substance fir provide mass of substance. The oxygen atoms present in 52.06 g of carbon dioxide are equals to 1.424 ×10²⁴. So, correct answer is option (c).

Molar mass is the mass of one mole of a substance in grams of that substance. Molar mass is determined using atomic mass values from the periodic table. The atomic mass is written in atomic mass units, and molar mass is written in grams. Now the mass of carbon dioxide =52.06 g

The molar mass of carbon dioxide, M= 2×16 g/mol + 12 g/mol = 32 g/mol + 12.

01 g/mol = 44.01 g/mol

We can now solve this problem by converting 52.06 g of carbon dioxide to moles of carbon dioxide. Avogadro's number (6.022×10²³) into carbon dioxide molecules. Finally multiply by 2. Because every carbon dioxide molecule has two oxygen atoms.

= (52.06 g CO₂) × (1 mol CO₂)/44.1 g CO₂) × (6.022×10²³ CO₂ molecules/1 mol CO2)× (2 Oxygen atoms/1 CO₂ molecule)

= 1.424×10²⁴ oxygen atoms.

So, the desired number of atoms is 1.424×10²⁴ oxygen atoms.

To learn more about Molar mass, visit :

https://brainly.com/question/837939

#SPJ4

a) The theoretical yield of H2O is 16.25 grams.

b) The actual yield of H2O is 13.81 grams

First, balance the equation

C3H8 + SO2 → 3CO2 + 4H2O

a) To calculate the theoretical yield of H2O when starting with 10 grams of C3H8, we first need to determine the limiting reagent. This is the reactant that will be completely consumed in the reaction, thereby limiting the amount of product that can be formed.

The molar mass of C3H8 is 44.1 g/mol,

so 10 grams of C3H8 is equivalent to 10/44.1 = 0.226 moles of C3H8.

The molar mass of SO2 is 64.1 g/mol. We don't know how much SO2 we have, so we need to use stoichiometry to determine the amount required to react with 0.226 moles of C3H8.

From the balanced equation, we can see that the molar ratio of C3H8 to SO2 is 1:1.

Therefore, we need 0.226 moles of SO2 to react with 0.226 moles of C3H8.

The molar ratio of H2O to C3H8 is 4:1.

So if 0.226 moles of C3H8 react, we can expect to produce 4 times as many moles of H2O.

The molar mass of H2O is 18.0 g/mol, so the theoretical yield of H2O is:

0.226 mol C3H8 × 4 mol H2O/mol C3H8 × 18.0 g/mol H2O

= 16.25 g H2O

Therefore, the theoretical yield of H2O is 16.25 grams.

b) If the actual yield of H2O is 85% of the theoretical yield, then the actual amount of H2O produced is:

0.85 × 16.25 g = 13.81 g

Therefore, the actual yield of H2O is 13.81 grams.

Learn more on stoichiometry here https://brainly.com/question/14935523

#SPJ1

Fructose and Glucose cannot be distinguish by [tex]BR_{2}[/tex] /[tex]H_{2}[/tex]O and Glucose and mannose are anomers.

Since they cannot be hydrolyzed into smaller carbs, monosaccharides are the most basic types of carbohydrates. They are chemically defined as aldehydes or ketones with two or more hydroxyl groups, and they play a crucial role in the production of fuel molecules, or glycolysis, as well as nucleic acids.

Monosaccharides are carbohydrates that cannot be further hydrolyzed to produce a simpler molecule of polyhydroxy aldehyde or ketone.

[tex]BR_{2}[/tex] /[tex]H_{2}[/tex]O can be used to differentiate between glucose and fructose because fructose doesn't react with [tex]BR_{2}[/tex] /[tex]H_{2}[/tex]O. Fehling's solution can distinguish between glucose and fructose because it only produces a good test result for aldehydes, such as glucose.

Mannose and glucose are epimers because they only vary at C-2, the first asymmetric carbon atom.

Learn more about Monosaccharides:

https://brainly.com/question/30548064

#SPJ4

The complete question is:

What is not true about monosaccharides?

a. Optically active polyhydroxy carbonyl compounds.

b. Fructose and Glucose cannot be distinguish by [tex]BR_{2}[/tex] /[tex]H_{2}[/tex]O

c. Glucose and mannose are anomers.

d. Fructose and Glucose cannot be distinguish by Fehling's solution.

At a pH of 4.0, the environment would be acidic and the histidine residue would be protonated because the pH is lower than the pKa of its functional group (which is approximately 6.0).

The ionisation state of amino acid residues, particularly histidine, can be critical for enzyme performance. The histidine residue's protonation status can alter its capacity to interact with other residues or substrates in the enzyme's active site. As a result, a histidine residue in an enzyme at a low pH of 4.0 would most likely be protonated, altering its catalytic characteristics and perhaps affecting the enzyme's overall activity.

Amino acids are chemical compounds that are used to construct proteins. There are 20 different amino acids found in proteins, each with its own side chain that defines its chemical and physical properties.

For such more question on acidic:

https://brainly.com/question/11089158

#SPJ4

Answer:

B) the sample should not be large, because a large sample would produce a higher and broader mp range.

The size of the sample can have an effect on the melting point measurement. Using a large sample size can lead to a higher and broader melting point range, making it more difficult to accurately determine the melting point of the substance. This is because a larger sample will take longer to heat uniformly, resulting in a less precise melting point measurement. Additionally, a larger sample may contain impurities that can affect the melting point range. Therefore, it is recommended to use a small sample size when measuring the melting point of a substance to obtain accurate and precise results.

Explanation:

A conjugate base is a species that is created by taking a proton out of an acid since, in the opposite reaction, it might help a hydrogen ion.

According to the Bronsted-Lowry acid-base theory, a conjugate acid is a chemical molecule that is created when an acid donates a proton to a base; in other words, it is a base that has had a hydrogen ion added to it, as in the opposite reaction, the base loses a hydrogen ion.

The conjugate base of some acids may also be acidic since they have the capacity to liberate a few protons.

According to Bronsted-concept Lowry's of acids and bases, a conjugate acid-base pair consists of two compounds that differ most from one another when a proton (H+) is present. 

Learn more about conjugate base here

https://brainly.com/question/28917111

#SPJ4

The products in the overall equation for aerobic respiration are ATP (adenosine triphosphate) and CO2 (carbon dioxide).

What is aerobic respiration?

Aerobic respiration is a metabolic process that uses oxygen to convert glucose into energy. During aerobic respiration, glucose (sugar) is broken down in the presence of oxygen (O2) to produce energy in the form of ATP (adenosine triphosphate). This process also produces carbon dioxide (CO2) and water (H2O). The energy produced by aerobic respiration is used to fuel cellular processes such as protein synthesis and muscle contractions. Aerobic respiration is the main form of respiration in humans and other animals.

The overall equation for aerobic respiration is C6H12O6 + 6O2 yields 6CO2 + 6H2O + energy (as ATP). ATP (adenosine triphosphate) and CO2 (carbon dioxide) are products in the overall equation for aerobic respiration. NaOH (natrium hydroxide) and CO (carbon monoxide) are not products in the equation.

Therefore, ATP (adenosine triphosphate) and CO2 (carbon dioxide) are the answers.

To learn more about aerobic respiration the link

https://brainly.com/question/12605249

#SPJ1

The equation for the autoionization of water is,

H₂O (l) + H₂O(l) ⇌ H₃O⁺(aq.) + OH⁻(aq.) and the value of Kw is 1.0 x 10⁻¹⁴.

In the process of autoionization of water, a proton is transferred from one water molecule to another to produce a hydronium ion (H₃O⁺) and a hydroxide ion (OH⁻).

The equilibrium expression for this reaction is,

      Kw = [H₃O⁺][OH⁻]

where Kw is the autoionization constant for water.

The process of autoionization is the ability of a compound to react with itself to form ions. In this, one water molecule reacts with a second molecule to form two ions H3O+ and OH-. These two ions exist in small amounts in pure water and influence the chemistry of water. In this reaction, a water molecule donates one of its protons to a neighboring water molecule either in pure water or in an aqueous solution is called the self ionization of water or autoionization.

To learn more about Autoionization please visit:

https://brainly.com/question/14657783

#SPJ4

A thermometer is a device used to gauge temperature. It may gauge the temperature of a solid substance, like food, a liquid substance, like water, or a gas, like air.

It was created to measure the temperature of the human body. It is a lengthy, narrow glass tube with a mercury-filled bulb at the end. A person's body temperature typically ranges from 35 to 42 degrees Celsius, or 37 in Celsius. This is why the clinical thermometers have a range of 35 to 42 C.

The joule is the SI unit for all three types of energy (J). The energy required to change the temperature of a substance or object is measured using the terms specific heat and heat capacity.

To know more about thermometer visit :-

https://brainly.com/question/24189042

#SPJ4

Considering the given acids in different beakers at the same pH of 3.00,

7.  All have the same hydrogen ion concentration.

The correct option is D

8. The solution that has the highest percent ionization is Beaker 1. The correct option is A.

The pH of a solution is the negative logarithm of the hydrogen ion concentration of the solution.

Since the acid solutions are all at the same pH, the hydrogen ion concentration of the solutions in the beaker is the same.

The percent ionization of acids is a measure of the number of hydrogen ions produced by 1 mole of the acid solution. Strong acids have a 1005 ionization.

Hence, HCl has the highest percent ionization of the acid solutions in the beakers,

Learn more about pH and percent ionization at: https://brainly.com/question/9080321

#SPJ1

The chemical boron trichloride (BCl3) is nonpolar. The molecule has a trigonal planar structure, with three chlorine atoms surrounding the central boron atom.

In BCl3, three chlorine atoms form covalent connections with the boron atom. While chlorine has seven valence electrons, boron's valence shell only has three. Boron thus forms three single covalent connections with three chlorine atoms by sharing its three valence electrons with them. The three B-Cl bonds are all polar because chlorine has a stronger electronegativity than boron. The three chlorine atoms are, however, symmetrically positioned around the primary boron atom because the molecule has a trigonal planar geometry and is symmetrical. This configuration causes the three B-Cl bonds' dipole moments to cancel out, resulting in a net dipole moment of zero. As a result of its lack of polar bonds, BCl3 is regarded as a nonpolar molecule.

learn more about Boron Trichloride here:

brainly.com/question/2966332

#SPJ4

The mass of oxygen gas required to occupy a volume of 6 L at a pressure of 20.9 kPa and a temperature of 37°C is 0.155 g, which is closest to option 2 (1.56 g). Option 2 is correct.

To solve this problem, we can use the ideal gas law, which relates the pressure, temperature, volume and the number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, as well as T is the temperature. We rearrange this equation to solve for the number of moles of gas:

n = PV/RT

We know the pressure (20.9 kPa), volume (6 L), temperature (37°C = 310 K), and we are looking for the number of moles of oxygen gas. The gas constant R is 8.31 J/(mol·K). Molar mass of oxygen gas (O₂) will be 32 g/mol.

n = PV/RT = (20.9 kPa)(6 L)/(8.31 J/(mol·K) × 310 K)

= 0.00487 mol

To calculate the mass of oxygen gas, we can use the molar mass:

mass = n × molar mass

= 0.00487 mol × 32 g/mol

= 0.155 g

Hence, 2. 1.56 g is the correct option.

To know more about ideal gas law here

https://brainly.com/question/13821925

#SPJ4

Atomic structure influences how atoms are bonded together.  Atomic derives from the Latin atoms, "indivisible particle," from the Greek atomos, "uncut" or "indivisible." Adjective of, pertaining to, or consisting of atoms is defined as "atomic."

The fundamental unit of chemistry is the atom. It is the smallest particle that can be separated into the matter without releasing electrically charged particles. Moreover, it is the smallest piece of matter with the characteristics of a chemical element.

Quarks and electrons, two different types of basic particles, make up atoms. The area around the nucleus of an atom is filled with electrons. A single electron has a -1 electrical charge. Protons and neutrons are made of quarks, and the nucleus of an atom is made up of these particles.

To know more about atoms visit

https://brainly.com/question/29695801

The grams in to the moles is as follows :

The number of moles = mass in grams / molar mass in grams /mol

The conversion in between the moles and the grams is the typical. The grams to the moles conversion is related to the the atomic weight. One mole of the material comprises of the Avogadro number of the atoms. The grams to the moles conversion formula is as follows :

The number of moles = mass in grams / molar mass in grams /mol

The number of the moles of the substance can be calculated by the divinding the mass to the molar mass of the substance.

To learn more about moles here

https://brainly.com/question/11543816

#SPJ4

The equation represents the integrated rate law for the zero-order reaction is at = - kt + a0. The correct option is a.

The integrated rate equation for the zero-order reactions is the equation name given to the equation. The integrated rate law for a zero-order reaction is as follows :

at = - kt + a0

The above equation is the equation that is known as the integrated rate equation for the zero order reactions. The zero - order reaction is the one whose rate is the independent of the concentration, its the differential rate law that is rate = k. This refer to the reactions as the zero order because we could also write the rate in the form such that the reactant in the rate law is the 0. Therefore, option a is correct.

To learn more about rate law here

https://brainly.com/question/26127112

#SPJ4