Determine whether each of the following represents a physical property or a chemical property:
(a) Chlorine gas has a greenish-yellow tint.
(b) The density of water at 4°C is 1.000 g/mL.
(c) Hydrogen gas is very flammable.
(d) Aluminum is a solid at 25°C.
(e) Water is colorless and odorless.
(f) Lemon juice tastes sour.
(g) Gold does not tarnish.
(h) Copper cannot be decomposed.

The density of the liquid is 0.87 g/mL. This liquid would be located in the "less dense than water" column since the density is less than 1 g/mL.

Density is a measure of mass per unit volume. It is used to measure the concentration of matter in a given space. The SI unit of density is kg/m3, although other units such as g/cm3 may also be used. The density of an object can be determined by dividing its mass by its volume. Density is an important physical property that affects how materials interact with each other, as well as how they interact with light and sound. For example, a denser material will be more likely to sink in a liquid. Additionally, higher density materials will generally be more durable than lower density materials. Density is also an important factor in understanding the behavior of fluids and gases.

To learn more about density from given link

brainly.com/question/26364788

#SPJ1

Answer:

NaClO4

Explanation:

The empirical formula for a compound with 18.8% Na, 29.0% Cl, and 52.3% O is NaClO4. This means that the compound contains one atom of sodium, one atom of chlorine, and four atoms of oxygen.

The molar concentration of the solution prepared by diluting it from 10 ml to 50 ml is 0.0004000 mol/L.

In order to calculate the molar concentration of the diluted solution, firstly we need to know the molar concentration of the original solution and its dilution factor. The dilution factor is the ratio of the final volume to the initial volume. The dilution factor can be calculated here :

dilution factor = final volume / initial volume

dilution factor = 50.00 ml / 10.0 ml

dilution factor = 5.00

The molar concentration of the diluted solution can be calculated by using the formual  M1V1 = M2V2

Here M1 is the initial molar concentration, V1 is the initial volume of the solution, M2 is the final molar concentration, and V2 is the final volume.

Putting the values we have in the equation M1V1 = M2V2.

M1 = the molar concentration of the original solution is unknown.

V1 = 10.0 ml

M2 = the molar concentration of the diluted solution is unknown.

V2 = 50.00 ml

Using this formula and solving for M2, we get:

M2 = M1V1 / V2

Since, we do not know the initial molar concentration,  M2 can not be calculated directly. But, we do know that the number of moles of solute is the same before and after the dilution. Therefore, we can use the following equation:

n = M1V1 = M2V2, where n is the number of moles of solute.

n = M1V1

M1 = n / V1

after putting in the given values :

n = M1V1

M1 = n / V1 = (10.0 ml / 1000.0 ml/L) x (0.2000 mol/L)

M1 = 0.002000 mol

Since we know the initial molar concentration now, we can use the formula M2 = M1V1 / V2 to find the molar concentration of the diluted solution,

M2 = M1V1 / V2 = (0.002000 mol/L) x (10.0 ml / 50.00 ml)

M2 = 0.0004000 mol/L

Hence, the molar concentration of the solution diluted from 10 ml to 50 ml is calculated out to be 0.0004000 mol/L.      

Learn more about molarity :

https://brainly.com/question/8732513

#SPJ4

If a solution is able to conduct electricity,ionic compounds must be dissolved in it as it will generate ions.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.

Learn more about ions,here:

https://brainly.com/question/29183072

#SPJ1

Taking into account the definition of Avogadro's Number, 1.38529×10²¹ molecules in 0.0023 mole of CO₂ .

Avogadro's number is defined as the number of particles (atoms, molecules, ions, electrons) in 12 grams of carbon-12, that is, in one mole of the substance or compound.

Its value is 6.023×10²³ particles per mole and it applies to any substance.

Considering the definition of Avogadro's number, you can apply the following rule of three: If 1 mole of CO₂ contains 6.023×10²³ molecules, 0.0023 mole of CO₂ contains how many molecules?

amount of molecules of CO₂= (0.0023 moles × 6.023×10²³ molecules)÷ 1 mole

amount of molecules of CO₂= 1.38529×10²¹ molecules

Finally, there are 1.38529×10²¹ molecules.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

The concentration of carbonyl fluoride (COF2) remains at equilibrium is 0.33M if only COF2 is present initially at a concentration of 2.00 M.

The reaction given is an equilibrium reaction, and so the reaction can be expressed in terms of the equilibrium constant (Kc).

The equilibrium constant (Kc) for the reaction is given as = 5.10.

[tex]2COF2(g) ,--- > CO2(g)+CF4(g)[/tex]

For an equilibrium reaction, the equilibrium concentration of the reactants can be determined using the following equation:

[tex]Kc = [CO2][CF4]/[COF2]^2[/tex] Where [CO2], [CF4], and [COF2] are the equilibrium concentrations of the respective species.

Rearranging the equation gives us the following expression:

[tex][COF2]^2 = [CO2][CF4]/Kc[/tex]

ICE chart is :

         [tex]2COF2(g) < -- > CO2(g) + CF(g)[/tex]

I                2                           0           0

C              -2x                       +x         +x

----------------------------------------------------------

E              2-2x                       x            x

Plugging in the values given, we can calculate the equilibrium concentration of COF2:

[tex]Kc = (x)(x)/(2-2x)^2[/tex]

[tex]6.40 = x^2/(2-2x)^2[/tex]

Taking the square root of both sides, we can calculate the equilibrium concentration of COF2:

x = 0.835M

[COF2] = 2-2x =2 -2(0.835) = 0.33M

Therefore, if only COF2 is present initially at a concentration of 2.00 M, the concentration of COF2 at equilibrium will be 0.33 M.

To learn more about Carbonyl fluoride click here https://brainly.com/question/4796698

#SPJ4

complete question: Carbonyl fluoride, COF2 , is an important intermediate used in the production of fluorine-containing compounds. For instance, it is used to make the refrigerant carbon tetrafluoride, CF4 via the reaction 2COF2(g)⇌CO2(g)+CF4(g), Kc = 6.40 . If only COF2 is present initially at a concentration of 2.00 M, what concentration of COF2 remains at equilibrium?

The molarity of both Li+ and SO42- ions in a 0.611 M solution of Li2SO4 is 1.22 M.

Lithium sulfate is a white inorganic salt with the formula Li₂SO₄.

When lithium sulfate (Li2SO4) dissolves in water, it dissociates into Li+ and SO42- ions:

Li2SO4(s) → 2 Li+(aq) + SO42-(aq)

If we assume that Li2SO4 dissociates completely in solution, then we can calculate the molarity of the Li+ and SO42- ions separately.

For Li+, we can use the stoichiometry of the dissociation reaction to see that the concentration of Li+ ions is twice the concentration of Li2SO4:

[L i⁺] = 2 × [Li₂SO4] = 2 × 0.611 M = 1.22 M

For SO42-, we also need to take into account that each formula unit of Li2SO4 produces two SO42- ions. Therefore, the concentration of SO42- ions is twice the concentration of Li2SO4:

[SO4²⁻] = 2 × [Li₂SO4] = 2 × 0.611 M = 1.22 M

So the molarity of both Li+ and SO42- ions in a 0.611 M solution of Li2SO4 (assuming complete dissociation) is 1.22 M.

Learn more about lithium sulfate here : brainly.com/question/15646231

#SPJ1

Keep in mind that concentration (mol/L) = (# of moles) / (volume (L) )

Find the volume in litres is easy: 25.0mL + 55.5mL = 80.5 mL = 0.0805 L

Now we have to find the number of moles of Chlorine (Cl) moles of Cl in 25.0mL of NH4Cl = (25.0mL)(1 L/1000mL)(0.2450mol NH4Cl/1L)(1 mol Cl/1 mol NH4Cl) = 0.006125 mol

Cl moles of Cl in FeCl3= (55.5mL)(1 L/1000mL)(0.1655mol FeCl3/1 L)(3 mol Cl/ 1 mol FeCl3) = 0.02755575 mol Cl

Total moles Cl = 0.006125 + 0.02755575 = 0.03368075 mol Cl

Concentration = (0.03368075/0.0805) = 0.418 mol/L Cl

What is concentration of solutions?

The amount of solute that has been dissolved in a specific volume of solvent or solution is measured by the solution's concentration. A solution that contains a significant amount of dissolved solute is said to be concentrated. A solution is said to be dilute if it only contains a small amount of dissolved solute.

To know more about concentration of solution, visit :

brainly.com/question/17206790

#SPJ1

The compound Li₂SO₄ on dissociation gives two moles of Li+ ions and one mole of SO₄ ²⁻ ions. Then the molarity of SO₄ ²⁻ is 0.611 M itself and the molarity of Li+ ions is 1.22 M.

Molarity of a solution is the ratio of  number of moles of solutes in that solution to the volume of solution in liters. It is a colligative property and depends on the amount of solute and solvent.

Molarity = n/V in L.

Given that, the molarity of Li₂SO₄ solution is 0.611 M. The complete dissociation of this compound is written as follows:

[tex]\rm Li_{2}SO_{4} \rightarrow 2 Li^{+} +SO_{4}^{2-}[/tex]

Here, the ionization of the compound produces 2 moles of Li+ and one mole of sulphate ions. Then, the molarity of the sulphate ions is the same as the whole solution that is 0.611 M.

Then molarity of the Li+ ions in the solution will be 1.22 M.

Find more on molarity ;

https://brainly.com/question/8732513

#SPJ9

There are 0.614 moles of Al2(CO3)3 in 143.7 grams of the compound.

Molar mass is the mass of one mole of a substance. A mole is a unit of measurement used in chemistry to express the amount of a substance. It is defined as the amount of a substance that contains as many elementary entities (atoms, molecules, ions, electrons) as there are in exactly 12 grams of carbon-12.

The molar mass of a substance is expressed in grams per mole (g/mol) and is calculated by summing the atomic masses of all the atoms in a molecule or formula unit of a substance. The atomic masses can be found on the periodic table, and they are expressed in atomic mass units (amu).

For example, the molar mass of water (H2O) is 18.015 g/mol. This is calculated by adding the atomic mass of two hydrogen atoms (1.008 amu each) and one oxygen atom (15.999 amu) together:

Molar mass of H2O = (2 x 1.008 amu) + 15.999 amu = 18.015 g/mol

Molar mass is an important concept in chemistry because it is used to convert between mass, moles, and number of particles of a substance. It is also used in stoichiometry calculations to determine the amounts of reactants and products in chemical reactions.

To calculate the number of moles in 143.7 grams of Al2(CO3)3, we need to first find the molar mass of Al2(CO3)3, which is the sum of the atomic masses of all the atoms in the compound.

The atomic masses of aluminum (Al), carbon (C), and oxygen (O) are:

Al: 26.98 g/mol

C: 12.01 g/mol

O: 16.00 g/mol

The molecular formula of Al2(CO3)3 indicates that there are 2 atoms of aluminum, 3 atoms of carbon, and 9 atoms of oxygen in each molecule of the compound. Therefore, the molar mass of Al2(CO3)3 can be calculated as follows:

Molar mass of Al2(CO3)3 = (2 × atomic mass of Al) + (3 × atomic mass of C) + (9 × atomic mass of O)

                      = (2 × 26.98 g/mol) + (3 × 12.01 g/mol) + (9 × 16.00 g/mol)

                      = 2 × 26.98 + 3 × 12.01 + 9 × 16.00

                      = 233.99 g/mol

Now we can use the molar mass of Al2(CO3)3 to convert the given mass of 143.7 grams to moles:

Number of moles of Al2(CO3)3 = Mass of Al2(CO3)3 / Molar mass of Al2(CO3)3

                       = 143.7 g / 233.99 g/mol

                       = 0.614 moles

Therefore, there are 0.614 moles of Al2(CO3)3 in 143.7 grams of the compound.

To know more about Mass visit:

https://brainly.com/question/6199002

#SPJ1

Answer: The solution is said to be saturated.

Explanation: A saturated solution is a solution in which the maximum amount of solute has been dissolved in a solvent at a particular temperature, such that any additional amount of solute will not dissolve.

In the case of NaCl at 50°C, the solubility of NaCl in water is 50g per 100g of water. Therefore, if 50g of NaCl is added to 100g of water at 50°C, it will dissolve completely, resulting in a saturated solution. Any additional NaCl added to the solution will not dissolve, as the solvent has already reached its maximum capacity to dissolve NaCl at this temperature. As a result, the excess NaCl will remain undissolved and settle at the bottom of the container.

CuNO2 is a compound containing a polyatomic ion.

Define ionic compounds.

Positively charged ions, known as cations, and negatively charged ions, known as anions, make up ionic compounds, which are neutral substances. The name of the cation is written first, followed by the name of the anion, for binary ionic compounds (ionic compounds that only contain two kinds of elements).

A covalently bound collection of two or more atoms, or a metal complex, that can be said to act as a single entity and has a net charge that is not zero is referred to as a polyatomic ion. A polyatomic particle may or may not be referred to as a molecule. Salt is copper nitrate. Ionic interactions keep copper nitrate in place. The ionic framework of copper nitrate is very large.

To learn more about ionic compounds use link:

https://brainly.com/question/2687188

#SPJ1

Answer:

14

Explanation:

Answer:

Filtration

Explanation:

FILTRATION = A technique that uses a porous barrier to separate a solid from a liquid.

Answer:

To determine how many moles make up 21.01 grams of H2O, you first need to know the molar mass of water (H2O). The molar mass of H2O is approximately 18.015 g/mol.

To set up the calculation, you can use the following formula:

moles = mass / molar mass

where "mass" is the given mass of H2O and "molar mass" is the molar mass of H2O.

Substituting the given values, you get:

moles = 21.01 g / 18.015 g/mol

Simplifying the right side of the equation, you get:

moles = 1.165 mol

Therefore, 21.01 grams of H2O is equal to 1.165 moles of H2O.

Explanation:

espero te sirva

The balanced equation for the given reaction is Cu[tex]_2[/tex]SO[tex]_4[/tex] + Ba(NO[tex]_3[/tex])[tex]_2[/tex] →2CuNO[tex]_3[/tex]+ BaSO[tex]_4[/tex]. The precipitates that result from it are these insoluble salts.

Chemical reactions known as precipitation reactions take place in aqueous solutions to produce precipitates. Moreover, chemical changes that occur inside the substances are a part of chemical processes. Hence, under some circumstances, it creates an entirely novel element.

It denotes a chemical process in which two ions combine to generate insoluble salts in aqueous solutions. The precipitates that result from it are these insoluble salts. Single displacement reactions and double displacement reactions are also possible.

a)The balanced equation for the given reaction is

Cu[tex]_2[/tex]SO[tex]_4[/tex] + Ba(NO[tex]_3[/tex])[tex]_2[/tex] →2CuNO[tex]_3[/tex]+ BaSO[tex]_4[/tex]

b) moles of Ba(NO[tex]_3[/tex])[tex]_2[/tex] = 0.02×0.2=0.04moles

The mole ratio between Ba(NO[tex]_3[/tex])[tex]_2[/tex] and BaSO[tex]_4[/tex] is 1:1

moles of BaSO[tex]_4[/tex]= 0.04moles

Therefore, the balanced equation for the given reaction is

Cu[tex]_2[/tex]SO[tex]_4[/tex] + Ba(NO[tex]_3[/tex])[tex]_2[/tex] →2CuNO[tex]_3[/tex]+ BaSO[tex]_4[/tex]

To know more about precipitation reaction, here:

https://brainly.com/question/29762381

#SPJ9

14 moles of iron will react with 10.5 moles of oxygen and produce 7 moles of ferric oxide (Fe2O3).

According to the balanced chemical equation:

4Fe + 3O_2 ---> 2Fe2O3

For every 4 moles of Fe, we need 3 moles of O_2 to react.

So, to determine the moles of oxygen required to react with 14 moles of iron, we can use the mole ratio from the balanced equation:

14 moles Fe x (3 moles O_2/4 moles Fe) = 10.5 moles O_2

Read more about balanced chemical equation:

https://brainly.com/question/28294176

#SPJ1

5.20 mol of calcium carbide (CaC2) will produce 2.60 moles of acetylene (C2H2).

Acetylene (C2H2) is a colorless, flammable gas primarily composed of two carbon atoms and two hydrogen atoms. It is one of the simplest and most useful of all the organic compounds. Acetylene is used in a variety of industrial applications, from welding and cutting metals to producing polyethylene plastics. Acetylene is also used as an industrial fuel and a chemical feedstock for many other compounds. As a fuel, acetylene is used for heating, lighting, and powering engines, as well as in torches for welding and cutting metals.

Based on the chemical equation for the reaction, calcium carbide (CaC2) reacts with water (H2O) to produce acetylene (C2H2) and calcium hydroxide (Ca(OH)2).

CaC2 + 2H2O → C2H2 + Ca(OH)2

Since 5.20 mol of CaC2 is given and water is in excess, we can assume that the amount of water is enough to completely react with the calcium carbide.

Using the mole ratio of the equation, we can calculate the amount of acetylene produced. Since 1 mole of CaC2 reacts with 2 moles of H2O to produce 1 mole of C2H2, 5.20 moles of CaC2 will produce 2.60 moles of C2H2.

To learn more about acetylene

#SPJ1

The mass (in grams) of aluminum chloride that has the same number of aluminum atoms as 3.19 g of aluminum oxide is 8.36 g

First, we shall determine the mass of aluminum, Al present in 3.19 g of aluminum oxide, Al₂O₃. Details below:

102 g of Al₂O₃ contains 54 g of Al

Therefore,

3.19 g of Al₂O₃ will contain = (3.19 × 54) / 102 = 1.69 g of Al

Next, we shall determine the number of atoms in 1.69 g of Al. Details below:

From Avogadro's hypothesis,

1 mole of Al = 6.02×10²³ atoms

But

1 mole of Al = 27 g

Thus,

27 g of Al = 6.02×10²³ atoms

Therefore,

1.69 g of Al = (1.69 × 6.02×10²³) / 27

1.69 g of Al = 3.772×10²² atoms

Finally, we shall determine the mass of aluminum chloride, AlCl₃. Details below:

From Avogadro's hypothesis,

6.02×10²³ atoms = 1 mole of AlCl₃

But

1 mole of AlCl₃ = 133.5 g

Thus,

6.02×10²³ atoms = 133.5 g of AlCl₃

Therefore,

3.772×10²² atoms = (3.772×10²² × 133.5) / 6.02×10²³

3.772×10²² atoms = 8.36 g

Thus, the mass of aluminum chloride, AlCl₃, is 8.36 g

Learn more about mass:

https://brainly.com/question/6613610

#SPJ1

l < ll < lll  is the following dienes in order of increasing reactivity in a Diels-Alder reaction, listing the least reactive first.

What is reactivity ?

An atom's or molecule's potential to interact chemically with another atom, molecule, or compound. Chemical reactivity is the ability or willingness of a substance to undergo a reaction. Energy can be released when the substance reacts with another substance or with itself.

What is reaction ?

The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds. The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds.

s-cis dienes react faster than s-trans diene toward diels alder reaction

Since

ll is s-cis diene and is rigid molecule therefore will always be in this orientation hence reace fastest .

lll is s- trans form and is rigid molecule with no free rotation ,hence can never attain

s-cis form hence will be least reactice towards diels alder reaction .

l is aliphatic hence free rotation around single bond so , beacuse of this free rotation can cause two alkens to come in s-cis form to give faster diels alder but will take some time to come in s cis form hence its reactivity will be lesser than ll which is already in s-cis form.

Therefore,  l < ll < lll  is the following dienes in order of increasing reactivity in a Diels-Alder reaction, listing the least reactive first.

Learn more about reactivity from the given link.

https://brainly.com/question/25103661

#SPJ1

If you added solid potassium nitrate (KNO3) to a saturated solution of KNO3 at 20°C and then warmed the mixture to 40°C, the added KNO3 would dissolve in the solution.

The inorganic salt potassium nitrate has the chemical formula KNO3. It is a naturally occurring source of nitrate that has been utilised as a component in a variety of products, such as fertilisers, tree stump grinders, rocket propellants, and pyrotechnics.

Potassium nitrate is a crystalline (sand-like), clear, white, or colourless powder or solid with such a salty, pungent flavour. It is employed in the production of glass, rocket fuel, fireworks, fertiliser, explosives, and matches. Due to DOT's citation, potassium nitrate is included on the Hazardous Material List.

To know more about potassium nitrate visit :

https://brainly.com/question/9458006

#SPJ1

The highest levels of atp are produced through the glycolysis Krebs (a) process.

By means of chemiosmosis, oxidative phosphorylation generates ATP using energy from the movement of electrons in an electron transport system. Only one proton (H+) and one electron are present in a hydrogen atom. Potential energy, or stored energy, is available to do work in electrons. A glucose molecule needs two ATP molecules to be completely phosphorylated. When glucose is phosphorylated to fructose 1,6-diphosphate in glycolysis, two molecules of ATP are used up.

A biological process called phosphorylation involves the addition of phosphate to an organic molecule. For two examples, adding phosphate to glucose will result in glucose monophosphate or adding it to adenosine diphosphate (ADP) will result in adenosine triphosphate (ATP).

To know more about Phosphorylation visit:

https://brainly.com/question/29104155

#SPJ1

The solutions for both are:

V_titanium = (1/4) V_total ≈ 0.188 cm³

And

V_iron = (3/4) V_total ≈ 0.565 cm³

We have a line in the V_titanium-V_iron plane with slope -4.5/7.87 and y-intercept 5/7.87. The two solutions above correspond to the points where this line intersects the line V_titanium = 0 and V_iron = 0, respectively.

The volume of titanium and iron in a bicycle can be related using the following constraint equation:

V_titanium * 4.5 + V_iron * 7.87 = M_total / 1000

where V_titanium and V_iron are the volumes of titanium and iron in cubic centimeters (cm³), M_total is the total mass of the bicycle in grams (g), and we divide by 1000 to convert the mass to kilograms.

We are given that the bicycle weighs 5 kg or 5000 g, so we can substitute M_total = 5000 into the equation:

V_titanium * 4.5 + V_iron * 7.87 = 5000 / 1000

4.5 V_titanium + 7.87 V_iron = 5

This is a linear equation in two variables, V_titanium and V_iron. To find two solutions, we need one additional equation that relates V_titanium and V_iron. One possibility is to assume that the bicycle contains a fixed ratio of titanium to iron, say 1:3. Then we can write:

V_titanium = (1/4) V_total

V_iron = (3/4) V_total

where V_total is the total volume of the bicycle, which is the sum of the volumes of titanium and iron:

V_total = V_titanium + V_iron

Substituting these expressions into the constraint equation and simplifying, we get:

(4.5/4) V_total + (7.87/4) V_total = 5/2

3.31 V_total = 5/2

V_total = (5/2) / 3.31

V_total ≈ 0.753 cm³

Using the ratios above, we can then calculate the volumes of titanium and iron:

V_titanium = (1/4) V_total ≈ 0.188 cm³

V_iron = (3/4) V_total ≈ 0.565 cm³

These are the two solutions for the volumes of titanium and iron in the bicycle, assuming a fixed ratio of 1:3.

To graph the constraint equation, we can solve for V_iron as a function of V_titanium:

V_iron = (5 - 4.5 V_titanium) / 7.87

This gives us a line in the V_titanium-V_iron plane with slope -4.5/7.87 and y-intercept 5/7.87. The two solutions above correspond to the points where this line intersects the line V_titanium = 0 and V_iron = 0, respectively.

Learn more on volume calculations of metals here https://brainly.com/question/29086711

#SPJ1

Only sketch B has water molecules in the correct shape/state that the indicated temperature predicts.

On the first assumption that all processes or water states exist at normal atmospheric pressure and temperature conditions!

In the images attached to this solution, sketch A is -23°C, sketch B is 237°C, and sketch C is 60°C.

But for water, the boiling point is 100°C. This means the temperature at which the shape changes from a nearly incompressible liquid state in which water molecules are fairly free to move to a gaseous state in which water molecules (now called steam) are completely free to move.

Its melting point is 0°C. In other words, this is the temperature at which water molecules change from an ordered solid (called ice), where motion is entirely confined to vibration, to the more free liquid state.

This explanation suggests that water molecules exist in an ordered solid form at temperatures below 0 °C.

Water molecules exist as a fairly free liquid at temperatures between 0°C and 100°C, and above 100°C they exist in a freely mobile gaseous state. In the sketch attached to this solution, sketch A clearly shows that the water molecules are in a form in which they are fairly free to move (i.e. in liquid form), corresponding to this state at a temperature of -23 °C. , which corresponds more closely to the fixed ordered state. State of water molecule like sketch C. So this is a mismatch.

Sketch B shows the water molecules in a very free gaseous state, which corresponds exactly to this state at temperatures well above the boiling point of water, 237°C. This will give you an exact match between temperature and sketch.

However, sketch C shows water molecules in a highly organized solid form, but this form has not been adapted to 60 °C. This is similar to the sketch A liquid state sketch. Only sketch B has water molecules in the correct shape/state that the indicated temperature predicts!

To know more about water molecules :

https://brainly.com/question/14677645

#SPJ1

The mass of sliver deposited at the cathode during the electrolysis of Nitrate (AgNO₃) solution is 0.0011 gram.

The term electrolysis is defined as a chemical reaction that happens when an electric current is pass over through a substance. The substance gets or loses an electron during chemical reaction.

Given:

Current = 0.10 ampere

Tome = 10 second

Molar mass of Ag = 108 g mol−1

1 Faraday = 96500 C

Q = i × t

=0.1 × 10 × 60

= 60 Coulombs

Weight of the substance deposited = ZQ

Z=M/nF​

n-factor of AgNO3 ​= 1

Z = 108 / 1 × 96500

= 0.0011 gram

Thus, 0.0011 gram is the mass of Sliver deposited at the Cathode during the electrolysis of Nitrate (AgNO₃) Solution.

To learn more about electrolysis, follow the link;

https://brainly.com/question/12054569

#SPJ9

Your question is incomplete, most probably your question was

Calculate the mass of Sliver deposited at the Cathode during the electrolysis of Nitrate (AgNO3) Solution,use a current of 0.10 ampere for 10 minutes.

Ionic compounds have high boiling and excessive melting points. Ionic compounds are non - risky as there exists a sturdy pressure of enchantment between the oppositely charged ions, so a large amount of electricity is required to destroy the strong bonding pressure between ions. Their constituent particles are ions.

For binary ionic compounds (ionic compounds that include solely two sorts of elements), the compounds are named by way of writing the name of the cation first observed through the name of the anion. For example, KCl, an ionic compound that includes K⁺ and Cl⁻ ions, is named potassium chloride.

Answer and Explanation: From the given compounds, only BaI2 B a I two is the ionic compound.

Learn more about compound here;

https://brainly.com/question/14782984

#SPJ1

Answer:

When a copper wire is heated in a Bunsen burner flame, the copper's color changes to become a glowing red. It won't be restored to its original appearance after cooling. Instead, it becomes a black material called copper (II) oxide, which is 79.9% copper and 20.1% oxygen (was 100% copper before it was burned). This chemical change occurred as the oxygen in the air combined with the copper during the heating process.

Explanation:

The evidence that indicates that both physical and chemical changes occur when a copper wire is heated in a Bunsen burner flame are:

The original appearance was not restored when the wire cooled, instead a new substance appears.

The wire changed color during the heating.

A physical change is a type of change in which the form, shape, size, or state of matter of a substance is altered, but the substance itself remains the same chemically. In other words, the composition of the substance does not change.

Examples of physical changes include changes of state (such as melting, freezing, or vaporization), changes in shape or size (such as crushing or cutting), and changes in appearance (such as changing color or texture).

A chemical change involves breaking or making of chemical bonds. This include formation of a new compounds and some color changes. Therefore,

The original appearance was not restored when the wire cooled, instead a new substance appears, states a physical change and

The wire changed color during the heating indicates a chemical change.

Find more on chemical change:

https://brainly.com/question/23693316

#SPJ2

Explanation:

thickness of bill