Displacement is called vector quantity. Why?

Answers

Answer 1

Answer:

Distance is a scalar quantity that refers to "how much ground an object has covered" during its motion. Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Explanation:


Related Questions

One way to separate the different kinds of matter in a mixture is through


A. filteration
B. decomposition
C. electrolysis
D. chemical reactions

Answers

The answer is filtration (A).

Creating a mixture is a physical process; as such, the substances that make up a true mixture do not undergo any chemical reactions with one another. It follows, then, that to separate substances that are mixed together, the process to use would be physical, not chemical. Filtration fits that bill: Solutes that do not dissolve in the solvent can be trapped, for example, by a fine mesh whose openings are large enough for the solvent to pass through but too small for the undissolved solute(s) to do so.

Choices B, C, and D are all chemical processes.

Decomposition (B) is the breakdown of a substance into chemically distinct fragments. For example, hydrogen peroxide in a mixture (solution) with water decomposes in the presence of an appropriate catalyst—the products you are left with are water and oxygen gas, which bubbles out of the mixture. But you haven’t separated the hydrogen peroxide from the water—through decomposition, the hydrogen peroxide molecules are broken up and the atoms rearranged to form different molecules. There’s no hydrogen peroxide left to separate anymore. So, decomposition doesn’t separate different substances in a mixture—it transforms them.

Electrolysis (C) is a chemical process that uses an electric current to drive the movement of charged particles (electrons and ions) through a conductive medium. Suffice it to say that this will almost certainly change the chemistry of a mixture. For example, assume you’ve got a mixture of some inert, insoluble solute in water. If you run a very strong electric current through water, you’ll end up decomposing the water molecules themselves into oxygen and hydrogen gases. Again, you haven’t technically separated the solute from the mixture because separation implies that you have the separated substances still around. In this example, you’ve “separated” your solute by chemically transforming your solvent into two different gases; one part of your mixture no longer exists. (Side note: electrolysis of pure water takes quite a bit of energy; on the other hand, tap water, which contains dissolved electrolytes, can be readily decomposed via electrolysis using the current delivered by a standard alkaline battery.)

As a rule of thumb, the suffix (–lysis) usually indicates chemical decomposition, and the stem that precedes the suffix usually indicates what the decomposition process involves. Examples include electrolysis (as we just discussed), hydrolysis (breaking a chemical bond using water), glycolysis (the biochemical process of breaking down glucose into smaller molecules to harness the energy released), and radiolysis (splitting a bond within atoms comprising a molecule using ionizing radiation).

Finally, as should be clear by this point, chemical reactions are not the way to go about separating mixtures. Again, the chemical substances in a mixture retain their chemical identities. Separating the constituents of a mixture essentially entails isolating these substances. Filtration can and does isolate solutes from solvents without altering their chemical identities (assuming the filter itself is chemically inert). A chemical reaction changes a substances chemical identity, and so could not properly be regarded as a method of separation, and only separation.

One way to separate the different kinds of matter in a mixture is through filtration. The correct option is A.

What is filtration?

Filtration is a physical or mechanical process by which two or more substances are of different compositions. These substances can be solid, liquid, or gas.

There are three types of filtration. These are mechanical, chemical, and biological. The different types of filtration are based on a similar principle, which is a mixture of several types poured onto a filter membrane. A specific size of the pore is present in the filter membrane.

The other options are decomposition, which is a process of breaking down substances. Electrolysis is separating charged ions and chemical reactions to form compounds.

Thus, the correct option is A. filtration.

To learn more about filtration, refer to the link:

https://brainly.com/question/14530470

#SPJ6

What are alkali metals

Answers

Answer:

Alkali metals are highly reactive elements that appear to be silver and they are found in group 1 of the periodic table.  It consists of lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr).  As you go further down the group, the more reactive they are.  Those elements all react to water and air, so they must be kept in oil to preserve their state.  

Alkali metals are any of the elements lithium, sodium, potassium, rubidium, cuisine, and francium, occupying Group 1A (1) of the periodic table. They are very reactive, electropositive, monovalent metals forming strongly alkaline hydroxides.

which of the following is not a name given for the four outer plantets

1. gas Giants
2. Jovian planets
3. Terrestrial planets

Answers

Hey :)

The answer is 3. Terrestrial planets

Gas giants and Jovian planets are names for the four outermost planets

Terrestrial planets are the names for the four innermost planets
They are called terrestrial because they have a compact, rocky surface

Hope this helps!

The one that is not a name given for the four outer planets terrestrial planets. The correct option is 3.

What are Terrestrial planets?

The planets Mercury, Venus, Earth, and Mars are referred to as terrestrial because their surfaces are compact and rocky, similar to Earth's terra firma. The terrestrial planets are the solar system's four innermost planets.

A terrestrial planet, telluric planet, or rocky planet is one that is primarily composed of silicate rocks or metals.

Mercury, Venus, Earth, and Mars are the inner planets in the Solar System that are closest to the Sun and are classified as terrestrial planets by the International Astronomical Union.

Astronomers who use the geophysical definition of a planet may consider two or three planetary-mass satellites, including the Earth's Moon, Io, and occasionally Europa, as terrestrial planets, along with the rocky protoplanet-asteroids Pallas and Vesta.

Thus, the correct option is 3.

For more details regarding terrestrial planets, visit:

https://brainly.com/question/18089177

#SPJ2

Steps for Seperating mixtures flowers peteale water and sugar

Answers

Answer:

How can we separate sugar from the mixture of sugar and water like we can remove acetone from water? The mixture of sugar-salt solution can be separated by evaporation. If the water is completely evaporated we will get separated sugar from the mixture.

The valency of sodium metal

Answers

Answer:

The atomic number of sodium is 11 (Z=11). The electronic configuration of sodium can be written as 2, 8, 1. Therefore, valence electron in sodium is 1 and it needs to lose 1 electron from the outermost orbit to attain octet. Hence, the valency of sodium is 1.

Explanation:

Hope this helps! Mark me as the brainliest

If carbon monoxide (CO) leaked into your home, would you predict that if would float to the
top of the room or stay near the floor? Answer the same question for carbon dioxide (CO2),
would it float or sink?

Answers

Answer: It will sink

Explanation:

To solve this we must be knowing each and every concept related to carbon monoxide. Therefore, carbon monoxide float to the top of the room.

What is carbon monoxide?

When the carbon in fuels burns inefficiently, a toxic gas known as carbon monoxide is created. It is emitted both naturally—from forest fires or volcanic eruptions, for example—and artificially—through procedures. It is lighter than the air.

By attaching to and removing oxygen from myoglobin, carbon monoxide reduces the oxygen storage capacity in muscle cells, which is another way it upsets the body's processes. If carbon monoxide (CO) leaked into your home, carbon monoxide float to the top of the room. Numerous manufacturing and medicinal items employ carbon monoxide.

Therefore, carbon monoxide float to the top of the room.

To know more about carbon monoxide, here:

https://brainly.com/question/22530423

#SPJ5

I WILL GIVE U BRAINLIST

Read this passage from "The Secret Life of Walter Mitty."

"Puppy biscuit," said Walter Mitty. He stopped walking and the buildings of Waterbury rose up out of the misty courtroom and surrounded him again.

A woman who was passing laughed. "He said ‘Puppy biscuit,’" she said to her companion. "That man said ‘Puppy biscuit’ to himself."


What does the dialogue in the excerpt show about Mitty?

He is awkward and absentminded.

He is responsible and conscientious.

He is funny and entertaining.

He is sour and nasty.

Answers

Answer:

He is awkward and absentminded.

Explanation:

"The Secret Life of Walter Mitty" by James Thurber presets the story of Walter with a dream. The beginning of the story reflects on the idea that the story is more inclined towards the dreams and fantasy-full world rater than reality. Walter's dreams are a mixture of reality and his imagination. He spoke certain words those do not have meaning in reality. He calls himself 'Puppy Biscuit" to which the women reacted with a laugh. This represented his absent-minded character and his appeal towards is dreams.

The missing components in the table to the right
are indicated with orange letters. Complete the
table by filling in the corresponding number(s) or
symbol(s) below.
A
B
1111
С
D
E
F
G

Answers

Further explanation

The Atomic Number (Z) indicates the number of protons in an atom of an element. If the atom is neutral then the number of protons will be equal to the number of electrons. So the atomic number can also indicate the number of electrons.

Mass Number (A) = Number of protons + Number of Neutrons

Atomic Number (Z) = Mass Number (A) - Number of Neutrons

Atomic number = number of protons = number of electrons  ⇒ neutral atoms

Atomic number - positive charge = number of electrons ⇒ cation

Atomic number + negative charge = number of electrons ⇒ anion

You can also see the periodic system

A. Indium (In)

B. proton = electron = 27

C. proton = electron = 73

D. proton = electron = 49

E=F. atomic mass - neutron = 137 - 81 = 56

G. atomic mass-proton = 115- 49 = 66

H. 181-73 = 108

Answer:

I know I´m kinda late but....

Explanation:

A. In

B. 27

C. 73

D. 49

E. 56

F. 54

G. 66

H. 108

I. 32

I need help with the 2nd part first gets brainlist

Answers

Answer:

7. 4H₂O

Elements: Hydrogen, Oxygen

Number of molecules: 4

Number of elements: 8 H, 4 O

Number of Atoms: 12

Explanation:

The elements are determined by the their symbol i.e. H = hydrogen.

The number of molecules is determined by the coefficient ( the number in front of everything, in this case 4).

The number of elements is determined by the coefficient and the subscripts. Multiply the coefficient by the subscript after each element. When there is no subscript, it is equal to 1.  4H₂ = 4x2 = 8;  4O = 4x1 = 4.

The number of atoms is all the individual elements added together. 8+4 = 12.

A student decided to research primate psychology for their science project. They measured how long it took gorillas to adapt to their new habitat when moved from one zoo to another. They measured how long it took the new gorilla to interact regularly (more than 3 times per day) with the gorillas that already live there. Seven different cases were examined and the data collected. What can be said about the data? [GorillaTime to interact (days)12.523.138.343.352.763.273.4]
[
Gorilla 1 2 3 4 5 6 7 Time to interact (days) 2.5 3.1 8.3 3.3 2.7 3.2 3.4
]
A. The data is only measured to one decimal place, so it is not reliable.
B. The data falls within similar ranges so it may be reliable.
C. The data is reliable because there is only one outlier.
D. The data may not be reliable because there is an outlier.

Answers

Answer: the answer is  D im pretty sure

Explanation:

Which element would be the least similar to magnesium (Mg)?

A) Na
B) Sr
C) Be
D) Ca

Answers

Answer:

NA

Explanation:

the other three options are alkali earth metals like magnesium (they are all in group 2). Sodium is the only one that is not an alkali earth metal.

The [tex]Na[/tex] element would be the least similar to magnesium ([tex]Mg[/tex] ).

Because all elements belongs to same group as magnesium except sodium.

Why elements belong to same group are similar?The vertical row in the periodic table is called group.The elements in the same group shows similar properties because the number of valence electrons is same for elements in same group.

What is valence electron?

The electron/electrons present in valence shell is called valence electrons.

To learn more about periodic table,

https://brainly.com/question/11155928

#SPJ2

Which of the following is a practice that shows you have intellectual honesty?
A. letting your beliefs influence your results
B. avoiding plagiarism of the works of others
C. making up data to support a special cause
D. copying the work of other scientists and claiming it as your own

Answers

Answer:

Avoid plagiarism and the work of others

Explanation:

I took the test and got it right. Hope this helps :)

Avoiding plagiarism of the work of others shows that you have intellectual honesty. So the correct option is B.

What is plagiarism?

The act of presenting someone else's ideas or work as your own, with or without that person's agreement, by integrating it into your work without giving it due credit, is known as plagiarism. This definition applies to all works, both published and unpublished, whether they are in manuscript, print, or electronic form.

Plagiarism can be willful, careless, or accidental. Plagiarism that is deliberate or careless is prohibited under exam regulations and is grounds for disciplinary action. In addition to text, additional media such as computer code, pictures, graphs, etc. must also include credit for the ideas and works of others.

It equally applies to both published and unpublished text and data taken from books and journals, lectures, theses, and other students' writings. Text, information, or other materials that you take from websites must also be credited.

Learning and using the rules of good academic practice from the start of your university career is the best way to prevent plagiarism.

Therefore the correct option is B.

Read more about plagiarism, here

https://brainly.com/question/17990253

#SPJ2

In reality, energy conversion from burning fuel is never 100% efficient. Significant loss of energy due to heating occurs. If the generator were only 20% efficient (which is more realistic), how much energy in joules would be converted to electrical energy and how much would be lost to heat? (2 points)​

Answers

Answer:

Electrical energy = 130000000 J and Heat energy = 520000000 J

Explanation:

Multiply the amount of joules from the last question (650000000) by .20 and .80. (Which are the percentages)


The density of air at STP is 1.285 g/L. Which of the following cannot be used to fill a balloon that will float in air at STP?

Answers

NO can't  be used to fill a balloon

Further explanation

Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters/mol.

Answer options that need to be added :

a. Ne

b. NO

c. NH₃

d. CH₄

e. HF

will float in air ⇒ element or compound to fill the balloon, its density must be less than < 1.285 g/L

We can use the ideal gas formula ta find density :

[tex]\tt \rho=\dfrac{P.MW}{RT}[/tex]

Because at STP, then the constant value is

[tex]\tt \rho=\dfrac{1~atm\times MW}{0.08205\times 273.15~K}\\\\\rho=0.0446\times MW[/tex]

So that the density is determined from the MW(molecular weight) of each element or compound

a. Ne

Ar = 20.1797 g/mol

[tex]\tt \rho=0.0446\times 20.1797=0.9~g/L[/tex]

b. NO

MW=30.006 g/mol

[tex]\tt \rho=0.0446\times 30.006=\boxed{\bold{1.338~g/L}}[/tex]

c. NH₃

MW=17.0306 g/mol

[tex]\tt \rho=0.0446\times 17.0306=0.760~g/L[/tex]

d. CH₄

MW=16.04 g/mol

[tex]\tt \rho=0.0446\times 16.04=0.715~g/L[/tex]

e. HF

MW=20.01 g/mol

[tex]\tt \rho=0.0446\times 20.01=0.892~g/L[/tex]

Based on the Phase Change Graph below, what is the Melting Point for this point
substance?

Answers

Answer:

Where is the phase melting graph? Can't seem to find it

Fill in the blanks: a substance that undergoes a ______ change will always result in something new that has ________ properties than what it started out as. A- physical and different. b- physical and same. C-chemical and different. D chemical and same

Answers

The answer is C. When an object undergoes a physical change, its properties are different.

Part 1)
There is a storage container with 5.25 tons of Ammonia (NH3). How many molecules of Ammonia are there?

Answers

Answer:

1.69×10²⁹ molecules.

Explanation:

The following data were obtained from the question:

Mass of Ammonia (NH3) = 5.25 tons

Molecules of Ammonia (NH3) =.?

Next, we shall convert 5.25 tons to grams (g). This can be obtained as follow:

1 ton = 907184.74 g

Therefore,

5.25 ton = 5.25 ton × 907184.74 g / 1 ton

5.25 ton = 4762719.885 g

Therefore, 5.25 tons is equivalent to 4762719.885 g

Finally, we shall determine the number of molecules of ammonia, NH3 in 4762719.885 g. This can be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ molecules. This implies that 1 mole of ammonia, NH3 also contains 6.02×10²³ molecules.

1 mole of ammonia, NH3 = 14 + (3x1) = 14 + 3 = 17 g

17 g of ammonia, NH3 contains 6.02×10²³ molecules.

Therefore, 4762719.885 g of ammonia, NH3 will contain = (4762719.885 × 6.02×10²³) / 17 = 1.69×10²⁹ molecules.

From the calculations made above,

5.25 tons (4762719.885 g) of ammonia, NH3 contains 1.69×10²⁹ molecules.

What are natural resources

Answers

Answer:

resources that come from the ground or eath naturally which also means that those minerals like coal take hundreds of years to be created

4. Know the location of metals, non-metals and metalloids

Answers

Answer:

The metals are to the left of the line (except for hydrogen, which is a nonmetal), the nonmetals are to the right of the line, and the elements immediately adjacent to the line are the metalloids.

Hope this helped

What elements do these macromolecules
have in common?
Copper, Helium, Oxygen
Carbon, Hydrogen, Oxygen
Calcium, Hydrogen, Oxygen
Carbon, Helium, Oxygen

Answers

Answer:

Carbon, Hydrogen, Oxygen

Explanation:

From the prefix "macro" which means large, macromolecules are considered to be "large molecules" when compared to the micromolecules. They come in four major types: proteins, nucleic acids, carbohydrates and lipids.

These macromolecules have three common elements and these are: Carbon, Hydrogen and Oxygen. These are all essential in the vitality of life. The human body is said to have 10% of carbon and 63% oxygen. Hydrogen, on the other hand, is said to be the most abundant element among organic molecules.

On the periodic table, the period number can identify the number of energy levels an element will contain.


False

True


i need help

Answers

Answer: True.
Hope this helps!!

The formula for finding density of a regularly shaped object is LxWxH.
True
False

Answers

                                Its true im pretty sure

It's true

Hope this helped!

What is the atomic number of an atom?
O the number of neutrons
O the number of electrons and neutrons
O the number of protons
the number protons and neutrons

Answers

The answer is the number of protons. I hope this helps
An atom is classified by how many protons it has.

Changes in the number of neutrons will change the individual isotope of that element that the atom is, but the atomic number is always equal to the number of protons.

Also, protons + neutrons = mass number, not atomic number!

A balloon is a sphere with a radius of 5.0 m. The force of air against the walls of the balloon is 45 N. What is the air pressure inside the balloon? Surface area = 12.56 × radius² 1 Pa = 1 N/m² How would I solve this problem? What are the steps or a good way to remeber how to solve?

Answers

Answer:

0.127 N/m² or 0.127 Pa

Explanation:

From the question given above, the following data were obtained:

Radius (r) = 5 m

Force (F) = 40 N

Pressure (P) =.?

Next, we shall determine the Surface area of the sphere (i.e the balloon). This can be obtained as follow:

Surface area = 12.56 × r²

Radius (r) = 5 m

Surface area = 12.56 × 5²

Surface area = 12.56 × 25

Surface area = 314 m²

Finally, we shall determine the pressure as follow:

Force (F) = 40 N

Surface area = 314 m²

Pressure (P) =.?

Pressure = Force /Area

Pressure = 40/314

Pressure = 0.127 N/m² = 0.127 Pa

Therefore, the pressure inside the balloon is 0.127 N/m² or 0.127 Pa.

The density of cadmium is 8.65 g/mL, what is the volume of a 33.4 g object made of pure cadmium?

Answers

Answer:

Volume = 3.86 ml (Approx)

Explanation:

Given:

Density of cadmium = 8.65 g/ml

Mass of pure object = 33.4 g

Find:

Volume pure cadmium

Computation:

Volume = Mass / Density

Volume = 33.4 / 8.65

Volume = 3.86 ml (Approx)

What is the volume of kristas rock

Answers

Answer:

30

Explanation:

Measure the water rised in the beaker which is 180 and subtract 150 and you get 30

Radon-222 is an alpha emitter with a half life of 3.82 days.

1. What is the mass number of the daughter isotope?
2. What is the element symbol of the daughter isotope?
3. What is the atomic number of the daughter isotope?​

Answers

The daughter isotope (a decay product): Polonium (Po)

Further explanation

Radioactivity is the process of unstable isotopes to stable isotopes by decay, by emitting certain particles,  

alpha α particles ₂He⁴ beta β ₋₁e⁰ particles gamma particles γ positron particles ₁e⁰

Radon-222 emits alpha α particles ₂He⁴  , so the atomic number decreases by 2, mass number decreases by 4

Reaction

[tex]\tt _{86}^{222}Rn\Rightarrow _{84}^{218}+_2^4He[/tex]

1. The mass number of the daughter isotope = 218

2 and 3. If we look at the periodic system, the element with atomic number 84 is Polonium (Po)

Explain Newton's first law of motion. Write your answer in the essay box below.

Answers

Answer:

I hope this helps :D

Explanation:

Newton's first law expresses that each object  will stay very still or in uniform movement in an orderly fashion except if constrained to change its state by the activity of an outside power. ... The third law expresses that for each activity (power) in nature there is an equivalent and inverse response.

Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia. ... If that velocity is zero, then the object remains at rest.

Which indicates that thermal energy is no longer being transferred from boiling water to a mug?

The mug and the water lose all thermal energy.
The water is hotter than the mug.
The mug is hotter than the water.
The water and the mug are the same temperature.

Answers

Answer:

Which indicates that thermal energy is no longer being transferred from boiling water to a mug?

The mug and the water lose all thermal energy.

The water is hotter than the mug.

The mug is hotter than the water.

•The water and the mug are the same temperature.

Explanation:

answer #D is correct

When the water and the mug are at the same temperature then thermal energy will no longer be transferred from the boiling water to the mug. Therefore, option (D) is correct.

What is thermal energy?

Thermal energy is generated in a substance when an increase in temperature causes atoms and molecules to move at a faster speed and result in the molecules colliding with each other. The energy generated from the temperature of the heated material is called thermal energy.

Thermal Energy or internal kinetic energy is because of the random motion of molecules in the system. The thermal energy of any system is directly proportional to its temperature.

The more the temperature of the system, the more the movement of molecules within a given system, and the more the thermal energy of the system.

The thermal energy will be transferred from the boiling water to the mug when the water is hotter than the mug. When both have the same temperature then the thermal energy is no longer being transferred from boiling water to a mug.

Learn more about thermal energy, here:

brainly.com/question/14506133

#SPJ6

Iron is a
homogenous mixture
O heterogeneous mixture
O element
compound

Answers

Answer:

element

Explanation:

Other Questions
what is 0.72 equivalent to? You see me now 4 kkt A group of tourists drives through a state park in Maine. While arguing about whether the animal they've just seen is an Elk or a Moose, a chipmunk darts across the park road. The driver, who was traveling 6.7 m/s through the park slams on their breaks and comes to a stop. If the car has an acceleration of -8.3 m/s2, how long does it take the car to stop? the equation 3x^2-6x=8 is rewritten in a form of 3(x-p)^2+q=0. The middle hieroglyph was unknown to him, but he guessed that the two at the left symbolized the sun.From his studies of Coptic, Champollion knew that the Egyptian word for "sun" was pronounced rah. He wrote down the first two letters of that sound, RA. Next he put a question mark for the unknown middle hieroglyph. Then, at the end, he wrote SS, the sound of the last two hieroglyphs.He studied the combination: RA ? SS. Suddenly he remembered a famous pharaoh whose name appeared in ancient Greek chronicles and also in the Biblical Book of Exodus: Rameses, or Ramesses. Could this be a hieroglyphic representation of Ramesses' name?The details in the excerpt point to which big-picture idea?Hieroglyphs are both a representation of sounds and symbols.Several famous names can be found in the Biblical Book of Exodus.The sun has symbolic meaning in many different cultures.Champollion knew that the Egyptian word for sun was pronounced rah. What effect does repetition have on Anthony's speech True or False? Police coldly and strictly uphold the law, ignoring their emotional and personal judgement. Solve the following equation algebraically. Show your work. 6=x+23 g 3. Suppose X and Y are independent, Binomial random variables, respectively, with parameters (n1, p) and (n2, p). Calculate the frequency function of X Y . Which of the following is NOT a symptom of depression?. Increased energy levelsDifficulty concentratingChange in appetite or weightRecurrent thoughts of death PLEASE HELP!!!!WILL GIVE BRAINLIEST, 5-STAR RATING, AND THANK YOU!!!In Part 1, for each of the grievances against King James II, Explain how this might have caused an issue either between the King and his people or between the King and Parliament.Thank you so much! Factorise fully48 + 6x please do quick it's due In 2 min 1. Choose the graph that represents the equation y = -x] - 1. Challenge 1A: Can you find thearea of the shape?B:Can you find theperimeter of the shape? What trait typically of the romantic era is featured in Washington Irving short story RIP Vanwinkle Which detail best supports the idea that gangs give some people a sense of belonging?His father was always beating him up, and his mother ignored him.. . . except when she was hacked off at something, and then you could hear her yelling at him clear down at our house.I think he hated that worse than getting whipped.If it hadnt been for the gang, Johnny would never have known what love and affection are. Which diagrams is not correct Requires a medium to travel (travel fastest through solid-like metal train tracks A Waves B Sound Waves C Light Waves D matter Please helpUse the table below to answer this question:x y1 -30 -12 3Find the average rate of change for the given function from x = 1 to x = 2. It has been reported that 72% of adults got their flu shots last year. In a randomsample of 500 adults find the mean.