Equipment not kept in your assigned lab drawer is called:

Shared equipment

Departmental equipment

Lab equipment

Community equipment

Tellurium tetrabromide molecule have one tellurium atom and four Bromine atoms. The bonds are formed by electron sharing and so the bond between them are covalent bonds.

Tellurium tetrabromide is an inorganic compound. Tellurium have 6 valence electrons in its outer shell. Four of these valence electrons bonds to four bromine atoms, which has 7 valence electrons. A single bond is formed between each bromine and tellurium. Tellurium has a remaining lone pair of electrons.

Lewis structure of molecules means the simplest way of depicting all the atoms in a molecule, valence electrons of all molecules and the bonds that are formed. The binds are denoted by lines and electrons by dots.

Tellurium tetrabromide have one tellurium atom covalently bonded to four bromine atoms.

For further information regarding Lewis structure , kindly refer

https://brainly.com/question/20300458

#SPJ4

The net ionic equation is: D. Ag+ + Cl- --> AgCl

The chemical formula for the product formed from CaCl2 in the equation 2 AgNO3 + CaCl2 --> 2 AgCl(s) + Ca(NO3)2 is Ca(NO3)2. This is a compound that consists of one calcium ion (Ca2+) and two nitrate ions (NO3-). It is a salt of calcium and nitric acid. It is a white crystalline solid that is highly soluble in water and is commonly used as a fertiliser. It is also sometimes used in the laboratory as a source of calcium ions in experiments. Overall, it is a product formed by the combination of two substances: calcium chloride and nitric acid.

To know more about CaCl2 visit: https://brainly.com/question/1580560

#SPJ1

As there are [tex]$2.32 \times 10^{-23} \mathrm{~g}$[/tex] nitrogen atoms in 28.02 g of nitrogen, there are the same number of oxygen atoms in the mass of oxygen.

Nitrogen atomic mass [tex]$=14 \mathrm{~g} / \mathrm{mole}$[/tex]

e.g., mass of one mole of [tex]$\mathrm{N}=14 \mathrm{~g}$[/tex]

Contains in 1 mole [tex]$6.022 \times 10^{23}$[/tex] atoms

[tex]$\therefore$[/tex] mass of [tex]$6.022 \times 10^{23}$[/tex] atoms of [tex]$\mathrm{N}=14 \mathrm{~g}$[/tex]

one atom's mass [tex]$\mathrm{N}=\frac{14 \mathrm{~g}}{6.022 \times 10^{23} \text { atoms }}$[/tex]

One N atom has a mass of [tex]$2.32 \times 10^{-23} \mathrm{~g}$[/tex]

Mole of Molecules: One mole is equal to [tex]6.022 \times10^{23}[/tex] molecules, or the molecular mass of one gram of any given substance. As a result, 1 mole of oxygen weighs 32 grams and has [tex]6.022 \times10^{23}[/tex] molecules in it. A mole of water weighs 18 grams and has [tex]6.022 \times10^{23}[/tex] molecules in it.

In 28 g of nitrogen, there are 2 moles. In order to find the number of molecules in one mole of oxygen, we will multiply 9.03 times 10 to the 23 molecules of oxygen, then by the molar mass of oxygen, which is 32.00 g of oxygen. This will give us 48.0 g of oxygen, which has the same number of molecules as one mole. As 42 g

To learn more about molecules refer to :

https://brainly.com/question/475709

#SPJ4

Car 1 of mass m1 is waiting at a traffic light. Car 1 is struck from behind by car 2 of mass m2. The two cars stick together after the collision. Car 2 was traveling at v2i = 30. 0 m/s before the collision. The kinetic energy of the system after the collision would be 128.5  KJ.

It is the combined effect of a particle's mass and speed, and it can be described as the product of these two quantities. Any particle's momentum is given in kilograms per second (Kg/s).

Car 1 of mass m1 is waiting at a traffic light, as stated in the problem.

Car 2 of mass m2 collides with Car 1 from behind. After the crash, the two cars stay joined. Car 2 was moving at a speed of 30.0 m/s when it collided with Car 1.

Using the principle of momentum conservation

2500(0) + 1000(30) = (2500 + 1000)v

v = 8.57 m/s

The system's calculated final velocity is 8.57 m/s.

the system's kinetic energy following the collision,

KE = 1/2 mv²

KE =1/2×(2500 + 1000)×8.57² = 128,571.4

= 128.5 KJ

As a result, the system's kinetic energy following the collision would be 128.5 KJ.

Your question is incomplete but most probably your full question was

Car 1 of mass m1 is waiting at a traffic light.

Car 1 is struck from behind by Car 2 of mass m2.

The two cars stick together after the collision.

Car 2 was traveling at v2i = 30.0 m/s before the collision.

What is the kinetic, in [J], of the system after the collision if m1 = 2500 kg and m2 = 1000 kg?

To learn more about momentum from here, refer to the link;

brainly.com/question/17662202

#SPJ4

The balanced equation tells us that we get 3 moles of O2 for every 9 moles of KClO3.we'll get (9/2)*3(m.0) moles O2 or 13.5  moles of O2.

How to calculate moles in a chemical reaction?

A mole is the mass of a substance made up of the same number of fundamental components. Atoms in a 12 gram example are identical to 12C. Depending on the substance, the fundamental units may be molecules, atoms, or formula units.

A mole fraction shows how many chemical elements are present. The value of 6.023 x 1023 is equal to one mole of any substance (Avagadro number). It can be used to quantify the chemical reaction's by-products. The symbol for the unit is mol.

The number of moles formula is denoted by the following expression.

Mass of material / Mass of one mole equals the number of moles.

To learn more about moles in a chemical reaction refer to:

https://brainly.com/question/15150357

#SPJ1

In terms of gradation, transparency increases as the angle of a comb is raised. High gradations produce the most transparency.

Professionals in the forestry industry refer to any type of harvesting technique that involves taking only the most expensive timber out of the woods and leaving the rest behind as "high-grading."

High grade refers to a harvest that leaves behind both tiny and large trees of low quality and species with low economic worth after removing those trees of commercial value. Any trees bigger than a certain diameter (for example, 12" and larger) are removed during a diameter-limit cut, which is a type of wood harvest. Cuts with a diameter restriction frequently have high grading.

To know more about high gradation visit:

https://brainly.com/question/28197459

#SPJ4

Answer:30 moles of oxygen are required if 12 moles of  are consumed.

Explanation:The given balanced equation is:

From this balanced equation, there is 2:5 mol ratio between  and  .

We are asked to calculate the moles of  required to react with 12 moles of .

It's a mol to mol conversion and the set up for this would be as:

=

So, 30 moles of oxygen are required to react with 12 moles of  .

Describe the relationship between evaporation and a rainy climate in one or two sentences.

A liquid transforms into a gas during evaporation. It is easy to visualize when raindrops "vanish" from puddles on a hot day or when wet clothing dries in the heat. Instead of really dissipating in these situations, the liquid water is evaporating into a gas known as water vapor. Global evaporation takes place.

Evaporation occurs on surfaces. Because it happens when molecules with more kinetic energy from the top layer of the liquid escape into the air, evaporation is a surface phenomenon.

To know more about evaporation visit:

https://brainly.com/question/18800215

#SPJ1

According to the Bohr model of the atom, the single electron of a hydrogen atom circles the nucleus is a. in specific, allowed orbits.

The Bohr model of the atom was introduced by the Neil Bohr . According to it :

Thus , According to the Bohr model the single electron of a hydrogen atom circles the nucleus in specific, allowed orbits.

To learn more about Bohr model here

https://brainly.com/question/1967112

#SPJ4

Answer:

A.Atoms in a molecule or electronic circuit

The mass of 6.022 1023 atoms of 12C is equal to 12 grams.

This is because 12C has an atomic mass of 12, meaning that each atom of 12C has a mass of 12 grams.

This means that 6.022 1023 atoms of 12C would have a total mass of 12 grams.

According to the Avogadro's constant, 6.022 x 1023 atoms of 12C would have a mass of 12 x 6.022 x 1023 grams, which is equal to 72.264 x 1023 grams.

Avogadro's Constant is an important physical constant which states that the same number of particles (atoms, molecules, ions, etc.) have the same mass in a given sample regardless of the nature of the particles.

To learn more about mass, click here:

https://brainly.com/question/19694949

#SPJ4

The characteristics that would be tested for would majorly be the electrode potential of the cells.

We can see that in a battery, we have to electrodes and these are the cathode and the anode. The anode is the electrode that current would enter into the cell through it while the cathode which the current would leave the cell.

Now, we know that the anode is positively charged and the cathode is negatively charged. The elements that would serve as the cathode and the anode would depend on the relative electrode potentials of the elements.

We know that sodium is more electropositive than magnesium as such the magnesium would be the cathode and the sodium would be the cathode of the cell. This is how the anode and the cathode can be determined in the cell.

Learn more about electrodes:https://brainly.com/question/17060277

#SPJ1

Answer:

The molarity of the solution is 25.5 M.

To calculate the molarity, we can use the formula: Molarity = (moles of solute/volume of solution). The molar mass of HCl is 36.5 g/mol, so we can calculate the number of moles present in 85.6 g of HCl: 85.6 g HCl/36.5 g/mol = 2.35 mol. We can then plug that value into our formula: Molarity = (2.35 mol/0.385 L) = 25.5 M.

The core dogma of molecular biology is the process by which DNA is converted into RNA, which is then translated into proteins.

During transcription, an enzyme known as RNA polymerase binds to a particular DNA sequence known as the promoter and produces a complementary RNA strand utilizing the data in the DNA's coding strand.

After transcription, the RNA molecule is moved from the nucleus into the cytoplasm where ribosomes interpret it and "translate" the genetic information into a series of amino acids. A functioning protein will then be formed from this amino acid sequence.

If you want learn more about transcription and translate, click here

https://brainly.com/question/29223095?referrer=searchResults

#SPJ4

To transcribe and translate a sequence of DNA into proteins, the DNA first needs to be transcribed into messenger RNA (mRNA) and then translated into proteins using the genetic code.

The first step in translating a DNA sequence into proteins is to transcribe the DNA into mRNA. This process occurs in the nucleus of the cell and is carried out by enzymes called RNA polymerases. After the DNA is transcribed, the mRNA is then exported out of the nucleus and enters the cytoplasm.

In the cytoplasm, the mRNA is translated into proteins by ribosomes with the help of transfer RNAs (tRNAs). During this translation process, the mRNA codons are translated into amino acids using the genetic code.

This code is composed of three-letter codons that correspond to the 20 amino acids used to make proteins. The tRNAs bring the corresponding amino acids to the ribosomes, where the amino acids are joined together by peptide bonds to form proteins.

This process continues until the ribosome reaches a stop codon, at which point the protein is complete.

For more questions like DNA click the link below:

https://brainly.com/question/20009664

#SPJ4

A tick marks between both the boldface values on this beam denote tenths of grams, while the bolded text numbers in this beam are in grams.Simply sum the figures from of the three beams to determine the object's mass that is resting on the pan.

To keep a beam horizontal for just a beam balance, a body with gravitational mass m1 and a standard weight pf m2 are placed in the left and right pans, respectively. If a1 = a2, then m1 = m2, and vice versa.

Yes, it is possible to achieve equilibrium between the two masses by bringing the midway (balancing point) closer to a heavier object or closer to the center of gravity.

To know more about unit of measurement visit:

https://brainly.com/question/15402847

#SPJ1

0.073 moles of ascorbic acid are needed to complete the prescription.0.4445×10²³ molecules are required .0.0014 molecules of aspartame are eaten.

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons.

For 1st part, as 1 mole=176.14 g , thus, 13 g=13×1/176.14=0.073 moles, for 2 nd part, as 1 mole=6.023×10²³ molecules, 0.073 moles=0.073×6.023×10²³=0.4445×10²³ molecules, for 3 rd part, 1 molecule=176.14 g , thus 0.25 g = 0.25/176.14=0.0014 molecules.

Learn more about mole,here:

https://brainly.com/question/26416088

#SPJ1

By beta emission, nitrogen is produced as carbon-14 decays. A particle is actually a rapidly moving electron with no mass and a net negative charge.

Unattached or attached to an atom, an electron is a negatively charged subatomic particle (not bound). One of the three main types of particles inside an atom, along with protons and neutrons, is an electron that is linked to the atom.

The term "electrons" now refers to these negatively charged cathode ray particles. Negatively charged electrons are incredibly light particles. The total amount of protons and neutrons makes up an atom's mass. While neutrons are neutral particles, protons are positively charged.

To know more about electrons visit:

https://brainly.com/question/18367541

#SPJ1

The temperature of the liquid in the flask on the previous page measured when the liquid in the thermometer has stopped rising   to measure confirmed or fixed temperature.

When the liquid in the flask is heated, its temperature rises, and when a thermometer is inserted into the flask to gauge the liquid's temperature, the liquid within the thermometer also begins to warm up.

The temperature of the liquid rises as a result of heat being transferred from a high temperature to a low temperature until the temperatures are equal. Therefore, when the liquid stops rising, both are at the same temperature, and this is how the liquid in the flask is being measured.

Learn more about thermometer at https://brainly.com/question/23352511

#SPJ4

Answer: 0.06 M

Explanation:

The definition of molarity is:

Molarity (M) = moles (mol) /liters (l)

Step 1: Convert grams of KMnO₄ to moles of KMnO₄.

10 g KMnO₄ x (1 mol KMnO₄/158.03 g KMnO₄) = 0.06328 mol KMnO₄

Step 2: Place the values of moles and liter into the definition of molarity.

M = mol/L

M = 0.06328 mol/1 L

Divide 0.06328 by 1

M = 0.06328

M = 0.06 to correct number of significant figures

A chemical change has taken place an adjustment in energy.A chemical reaction can be detected by bubbling, a change in color, a change in smell, the production of a precipitate, and heat.

To learn more about chemical change refer to:

https://brainly.com/question/1222323

#SPJ4

In this given chemical equation of oxidation reaction , Bromine will lose an electron.

In the given chemical reaction we can observe that initially Bromine is in a negative state. Later on it undergoes oxidation reaction. In any oxidation reaction there is a loss of electrons. Similarly when the oxidation increases in the Bromine it loses its electron. Whereas in the potassium there is no evident change. It remains cation i.e. positive charge in the reaction.

Let’s understand this after observing this equation deeply: Cl2 (g) + K+Br- gives K+Cl- + Br2(g) - Here in the equation, 1- of Bromide turns 0 after the reaction, where 1+ of potassium is the same in both the reactant & product side.

Thus, from the above argument we can conclude that Bromine will lose an electron.

Learn more about oxidation reaction here:

https://brainly.com/question/2525090

#SPJ4

The mechanical procedure of peeling is often referred to as exfoliation. Exfoliation is the term used to describe the process whereby rock sheets gradually separate from exposed rocks along fissures.

By using mechanical means, rocks and minerals are broken apart. Their chemical make-up does not alter. A big rock mass can be physically weathered into smaller, more easily moved, and more readily eroded pieces. Even enormous rocks frequently break along weak spots in nature. Exfoliation in metamorphic rocks, joints in huge igneous rocks, and bedding planes in sedimentary rocks are a few of the most typical.

To learn more about mechanical weathering refer to;

brainly.com/question/15067483

#SPJ4

To balance a chemical equation, it is permissible to adjust the: coefficients.

To learn more about chemical reaction refer to:

https://brainly.com/question/11231920

#SPJ4

Electron configuration for Ne is [tex]$1 s^2 2 s^2 2 p^6$[/tex].

The arrangement of an element's atoms and electrons among various atomic orbitals is symbolically represented by the electronic configuration of that element.

In the electronic configuration, electrons are dispersed throughout an atom's several energy levels, or "shells," including the K shell, L shell, M shell, and N shell, among others.

All electron-containing atomic subshells are placed in a particular order according to the conventional nomenclature for atomic electron configurations.

Protons, neutrons, and electrons are the three main subatomic particles found in an atom.

With a total of 10 electrons, neon is the tenth element. The initial two electrons in the electron configuration for neon will be in the 1s orbital. The following two electrons for Ne enter the 2s orbital since 1s can only hold two electrons. Six additional electrons will enter the 2p orbital.

Therefore the Ne electron configuration will be

[tex]$1 s^2 2 s^2 2 p^6$[/tex]

For more questions on electron configuration

https://brainly.com/question/14283892

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 1.42×10²¹ molecules are in 0.00236 mole of NaOH.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number

number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)

number of moles of NaOH=0.00236 mole

Substituting all the given values in the above equation, we get

number of atoms/molecules=0.00236 × 6.022×10²³

number of atoms/molecules=1.42×10²¹ molecules

Therefore, 1.42×10²¹  molecules are in 0.00236 mole of NaOH.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

The Lewis structure of SF4 consists of one sulfur (S) atom and four fluorine (F) atoms.

Sulphur (S) is in the center and the fluorine (F) atoms are circled .

The Lewis structure of SF4 contains 13 lone pairs and 4 bonding pairs.

Note that in the Lewis structure, the lone pairs are represented by dots and the bonding pairs are simply, double or triple.

So there are 4 bonding pairs in the Lewis structure of SF4, which means there are 8 bonding electrons and 13 lone pairs (1 on the central atom + 3 on each fluoride atom).

To know more about SF4:

brainly.com/question/22195412

#SPJ4

Yes , Serine is a polar but neutral amino acids.

Asparagine, glutamine, threonine, and serine are polar but uncharged amino acids. These side chains tend to project into the aqueous phase because they can create many hydrogen bonds.

If they are buried polar groups, they are hydrogen-bonded to other buried polar groups if they are inside the protein.

Because the hydroxyl groups in serine and threonine's side chains are polar and near to the main chain, they can establish hydrogen bonds with the main chain.

Ser is essentially hydroxy-Ala since it has one -OH group. Because the hydroxyl group on Ser typically does not ionize, it is not charged and is instead neutral in proteins. Ser is the most polar and smallest of the polar amino acids.

To learn more about polar amino acid refer to:

brainly.com/question/30243211

#SPJ4

Answer:

Accelerometer

Explanation:

Accelerometer are use to measure Acceleration

The fluorine atom's high electronegativity (4.0 vs. 2.5 for carbon) provides the carbon-fluorine bond a sizable polarity/dipole moment.

A measure of an organism's ability to draw electron pairs to itself is its electronegativity. On the chemical elements, electronegativity typically rises from left to right over a period and falls from top to bottom within a group.

An indicator of an atom's attraction to the electron in a condensation reaction is its electronegativity. An atom will be more attracted to bonding electrons the higher its electronegativity.

To know more about electronegativity visit:

https://brainly.com/question/17762711

#SPJ4

To transcribe and translate amino acids, they must first be transcribed from DNA to mRNA, then translated from mRNA to protein.

Transcribing involves the use of an enzyme called RNA polymerase, which reads the DNA sequence and synthesizes a complementary mRNA molecule.

The mRNA molecule is then read by ribosomes, which are responsible for translating the sequence into a sequence of amino acids. This process is called translation, and the resulting sequence of amino acids forms a protein.

The order of the amino acids determines the structure and function of the protein. Transcribing and translating proteins is important for the cell to make proteins that help it to survive and grow.

For more questions like Amino acids click the link below:

brainly.com/question/11737661

#SPJ4