Answer:
c. energy
Explanation: an atom increases negative charge put frustration/ stress on other electrons causing alot of energy to be released.
Seth wants to create a replica of a doughnut for a rooftop sign for his bakery. The replica has a diameter of 18 feet. The diameter of the hole in the center is equal to the replica's radius.
Once the replica is built, Seth wants to string small lights around the outer edge. How long will the string of lights need to be?
A. Write a numerical expression for the length of the string of lights needed.
B. Simplify your expression. Use 3. 14 as an approximation for.
C. Explain how you got your answer.
To determine the length of the string of lights needed for Seth's doughnut replica, we can follow these steps:
A. The length of the string of lights needed can be expressed as the circumference of the doughnut replica. The formula for the circumference of a circle is C = 2πr, where C represents the circumference and r represents the radius.
B. Given that the diameter of the replica is 18 feet, the radius would be half of that, which is 9 feet. Using the approximation 3.14 for π, we can simplify the expression: C = 2 × 3.14 × 9.
C. Simplifying further, we have C = 56.52 feet. Therefore, the string of lights needed for Seth's doughnut replica would need to be approximately 56.52 feet long.
In summary, the length of the string of lights needed for the doughnut replica is approximately 56.52 feet. This is calculated by using the formula for the circumference of a circle, substituting the radius of the doughnut replica, and simplifying the expression using the approximation 3.14 for π.
To learn more about circumference click here : brainly.com/question/28757341
#SPJ11
Consider the nuclear fusion reaction 2H+6Li→4He+4He.Part A Compute the binding energy of the 2H.Answer: B = ___ MeVPart B Compute the binding energy of the 6Li.Answer: B = ___ MeVPart C Compute the binding energy of the 4He.Answer: B = ___ MeVPart D What is the change in binding energy per nucleon in this reaction?
A. The binding energy of the ²H = 1.0069 MeV.
B. The binding energy of the ⁶Li =28.11 MeV.
C. The binding energy of the ⁴He = 25.70 MeV.
D. The change in binding energy is - 3.3 MeV.
The mass of the proton, mp = 1.007276 u
The mass of the neutron, mn = 1.007825 u
The mass of the H₂ = 2.01402 u.
The mass of the Li = 6.015126 u
The mass of the He = 4.002603 u
A) The binding energy of ²H :
Δm = ( mp + mn - mH₂ )
Δm = ( 1.007276 + 1.007825 - 2.01402)
Δm = 1.081 × 10⁻³ u.
B.E = 1.081 × 10⁻³ × 931.5
B.E = 1.0069 MeV
B) The binding energy of Li :
Δm = ( mp + mn - mLi )
Δm = ( 3× 1.007276 + 3 × 1.007825 - 6.015126 )
Δm = 0.030177 u.
B.E = 0.030177 × 931.5
B.E = 28.11MeV
C) The binding energy of helium :
Δm = ( 2 × mp + 2 × mn - mHe )
Δm = ( 2 × 1.007276 + 2 × 1.007825 - 4.002603 )
Δm = 0.027599 u.
B.E = 0.027599 × 931.5
B.E = 25.70 MeV
D) The change in binding energy / nucleon = B.E / nucleon before reaction - B.E / nucleon after reaction.
The change in binding energy / nucleon = ( 1.0069 + 28.11 ) / 8 - 27.7065 / 4
The change in binding energy / nucleon = - 3.3 MeV.
To learn more about binding energy here
https://brainly.com/question/30087556
#SPJ4
Using the periodic table, find the electron configuration of the highest-filled sublevel for each of these elements. Try to do this without writing the full electron configuration. boron: 2p! germanium: 4b2 technetium: 4d5 tellurium: Sp4
Boron: 2p1, Germanium: 3d10 4s2 4p2, Technetium: 4d5, Tellurium: 5s2 5p4.
For each element, we can determine the highest-filled sublevel by locating its position on the periodic table:
1. Boron (B, atomic number 5): It is in period 2 and group 13. Therefore, its highest-filled sublevel is 2p1.
2. Germanium (Ge, atomic number 32): It is in period 4 and group 14.
To reach group 14 in period 4, we pass through the 3d sublevel. So, its configuration is 3d10 4s2 4p2.
3. Technetium (Tc, atomic number 43): It is in period 5 and group 7, in the d-block.
Thus, its highest-filled sublevel is 4d5.
4. Tellurium (Te, atomic number 52): It is in period 5 and group 16.
Therefore, its highest-filled sublevel is 5s2 5p4.
For more such questions on Germanium, click on:
https://brainly.com/question/28727396
#SPJ11
As there is no "b" or "!" in the periodic table, it appears that there are some typos in the element symbols given. I'll presume that you meant to say:
Nickel: 2p
4p Germanium
5p Tellurium
The orbital with the largest main quantum number (n) that is not entirely filled with electrons is referred to as having the highest-filled sublevel's electron configuration. The azimuthal quantum number (l), which for the highest-filled sublevel is equal to n-1, is used to identify the sublevel.
The electron configuration of boron is 1s2 2s2 2p1. With l=1 and n=2, the highest-filled sublevel is 2p.
The electron configuration of germanium is [Ar] 3d10 4s2 4p2. With l=1 and n=4, the highest-filled sublevel is 4p.
The electron configuration of technetium is [Kr].
learn more about element symbols here:
https://brainly.com/question/14678810
#SPJ11
calculate the volume of 0.5 m hcooh and 0.5 hcoona
The volume of 0.5 M HCOONa solution required to prepare 1 mole of HCOONa is 2 L.
To calculate the volume of 0.5 M HCOOH and 0.5 M HCOONa, we need to use the equation:
Molarity = moles of solute / volume of solution in liters
Rearranging the equation gives:
Volume of solution in liters = moles of solute / Molarity
For HCOOH:
Given the molarity of HCOOH = 0.5 M
Let's assume the volume of solution to be V liters
Now, let's assume that we need to prepare 1 mole of HCOOH solution.
The molar mass of HCOOH is 46.025 g/mol. So, 1 mole of HCOOH will weigh 46.025 g.
Thus, we can find the number of moles of HCOOH as:
1 mole of HCOOH = 46.025 g of HCOOH
Number of moles of HCOOH = (46.025 g) / (60.05 g/mol) = 0.767 moles
Now, we can find the volume of 0.5 M HCOOH solution as:
Volume of HCOOH solution = moles of HCOOH / Molarity of HCOOH
= 0.767 moles / 0.5
= 1.534 L
Therefore, the volume of 0.5 M HCOOH solution required to prepare 1 mole of HCOOH is 1.534 L.
For HCOONa:
Given the molarity of HCOONa = 0.5 M
Let's assume the volume of solution to be V liters
We can use the same approach as for HCOOH to calculate the volume of 0.5 M HCOONa solution required to prepare 1 mole of HCOONa. The molar mass of HCOONa is 68.007 g/mol. So, 1 mole of HCOONa will weigh 68.007 g.
Thus, we can find the number of moles of HCOONa as
1 mole of HCOONa = 68.007 g of HCOONa
Number of moles of HCOONa = (68.007 g) / (68.007 g/mol) = 1 mole
Now, we can find the volume of 0.5 M HCOONa solution as:
Volume of HCOONa solution = moles of HCOONa / Molarity of HCOONa
= 1 mole / 0.5 M
= 2 L
For more question on volume visit:
https://brainly.com/question/29796637
#SPJ11
consider a classical two-dimensional gas. what is the heat capacity per mole of molecules at an absolute temperature t?
The heat capacity per mole of molecules in a classical two-dimensional gas is proportional to the absolute temperature T.
In a classical two-dimensional gas, the heat capacity per mole of molecules at an absolute temperature t is given by the equipartition theorem. According to this theorem, each degree of freedom of a molecule contributes an energy of 1/2 kT, where k is the Boltzmann constant and T is the absolute temperature.
In a two-dimensional gas, there are only two degrees of freedom: translational kinetic energy in the x and y directions. Therefore, the total energy of a molecule in a two-dimensional gas is given by:
E = 1/2 mvx^2 + 1/2 mvy^2
where m is the mass of the molecule, vx and vy are the velocities in the x and y directions, respectively.
The heat capacity per mole of molecules at an absolute temperature t is then given by:
Cv = (dE/dT)m
where m is the mass of a mole of molecules and dE/dT is the derivative of the total energy with respect to temperature.
Taking the derivative of the energy equation with respect to temperature, we get:
dE/dT = 1/2 mvx^2 + 1/2 mvy^2 = (1/2)kT + (1/2)kT = kT
Substituting this into the heat capacity equation, we get:
Cv = (dE/dT)m = (kT)m
Therefore, the heat capacity per mole of molecules in a classical two-dimensional gas is proportional to the absolute temperature T.
To know more about temperature click here:
https://brainly.com/question/15267055
#SPJ11
if the oil in your thiele tube starts smoking when you are measuring the boiling point, what action(s) should you take
If the oil in your Thiele tube starts smoking when you are measuring the boiling point, it is an indication that the temperature has gone beyond the boiling point of the oil.
In this situation, the best action to take is to stop heating the Thiele tube immediately. Failure to stop heating the Thiele tube could cause the oil to catch fire, which could lead to a potentially dangerous situation.
Once you have stopped heating the Thiele tube, allow the oil to cool down. This will prevent any further damage to the equipment and ensure that the experiment can be repeated. Once the oil has cooled down, carefully remove the Thiele tube from the heating apparatus. It is important to do this carefully to avoid any spills or splashes, which could cause further damage or injury.
After the Thiele tube has been removed from the heating apparatus, clean it thoroughly to remove any residue or ash that may have accumulated. Once the Thiele tube has been cleaned, it can be used again for future experiments.
In conclusion, if the oil in your Thiele tube starts smoking during a boiling point measurement, you should immediately stop heating the tube, allow it to cool down, and then clean it thoroughly before using it again. This will ensure that the experiment can be safely repeated and prevent any potential hazards.
To learn more about thiele tube:
https://brainly.com/question/10973514
#SPJ11
Select the reagent for the following reaction. ? cyclohexanecarboxylic anhydride OPh Acid halide Anhydride Ester Amide Alcohol Amine Carboxylic acid or carboxylate (the conjugate base of carboxylic acid)
The possible reagents that could react with cyclohexane carboxylic anhydride depend on the type of reaction you want to perform. Here are some possibilities:
Acid halide reaction: To perform an acid halide reaction, you would use a nucleophile such as an alcohol, amine, or carboxylate ion. The reagent would depend on the nucleophile you want to use. For example, if you wanted to use an alcohol as the nucleophile, you could use pyridine and an alcohol such as methanol or ethanol.
Esterification: To perform an esterification, you would use an alcohol and an acid catalyst. The reagent would be the alcohol you want to use and the catalyst could be something like sulfuric acid or p-toluenesulfonic acid.
Amide formation: To form an amide, you would use an amine as the nucleophile. The reagent would depend on the amine you want to use. For example, if you wanted to use aniline, you could use pyridine and aniline.
Hydrolysis: To hydrolyze the anhydride to form two carboxylic acids, you would use water and an acid catalyst. The reagent would be water and the catalyst could be something like sulfuric acid.
Know more about Esterification here :
brainly.com/question/28118164
#SPJ11
A 35. 3g of element M is reacted with nitrogen to produce 43. 5g compound M3N2, what is the molar mass of the element
The molar mass of element M can be calculated based on the given mass of the compound [tex]M_{3}N_{2}[/tex] formed from the reaction. In this case, the molar mass of element M is 12.01 g/mol.
To calculate the molar mass of element M, we need to use the law of conservation of mass. The mass of the compound M_{3}N_{2} (43.5 g) is equal to the sum of the masses of three atoms of M and two atoms of nitrogen. We can calculate the mass of M in the compound by subtracting the mass of nitrogen from the total mass.
The molar mass of nitrogen (N) is 14.01 g/mol. Therefore, the total mass of nitrogen in the compound is 14.01 g/mol × 2 = 28.02 g/mol.
Now, subtracting the mass of nitrogen from the total mass of the compound, we get the mass of M: 43.5 g - 28.02 g = 15.48 g.
Since the mass of 35.3 g of element M reacted to form 15.48 g of M in the compound, we can conclude that the molar mass of element M is 15.48 g/mol / 35.3 g/mol = 12.01 g/mol, which is the molar mass of carbon (C).
Learn more about compound here: https://brainly.com/question/27513728
#SPJ11
use two pieces of data to comment on whether the ratio of (e,e)-1,4-diphenyl-1,3-butadiene to (e,z)-1,4-diphenyl-1,3-butadiene changed after recrystallization.
To comment on whether the ratio of (e,e)-1,4-diphenyl-1,3-butadiene to (e,z)-1,4-diphenyl-1,3-butadiene changed after recrystallization, you'll need two pieces of data: the initial ratio before recrystallization and the ratio after recrystallization.
Step 1: Obtain the initial ratio of (e,e)-1,4-diphenyl-1,3-butadiene to (e,z)-1,4-diphenyl-1,3-butadiene before recrystallization. This can be found through techniques like nuclear magnetic resonance (NMR) or high-performance liquid chromatography (HPLC).
Step 2: Perform the recrystallization process, which typically involves dissolving the compound in a solvent, filtering out impurities, and cooling the solution to allow the desired compound to crystallize.
Step 3: Measure the ratio of (e,e)-1,4-diphenyl-1,3-butadiene to (e,z)-1,4-diphenyl-1,3-butadiene after recrystallization using the same technique as in Step 1.
Step 4: Compare the initial ratio to the ratio after recrystallization. If the ratio has changed significantly, this indicates that the recrystallization process has had an impact on the ratio of the two isomers.
By analyzing these two pieces of data, you can comment on whether the ratio of (e,e)-1,4-diphenyl-1,3-butadiene to (e,z)-1,4-diphenyl-1,3-butadiene has changed after recrystallization.
Learn more about crystallization: https://brainly.com/question/13008800
#SPJ11
How many of the following 4 molecules are polar? BrF3 CS2 SF4 SO3 FOR UPLOAD: DRAW LEWIS STRUCTURE FOR EACH COMPOUND, DETERMINE IF THERE ARE POLAR BONDS IN EACH COMPOUND AND EXPLANATION FOR YOUR ANSWER. 4 O 1 2 O o 3
Three out of the four molecules are polar.
Which of the given molecules are polar?
Among the given molecular polarity , BrF3, SF4, and SO3 are polar due to their molecular geometry and polar bonds. BrF3 has a trigonal bipyramidal shape with three polar bonds and a lone pair, making it polar. SF4 has a seesaw shape with one lone pair and four polar bonds, making it polar. SO3 has a trigonal planar shape with three polar bonds but is overall nonpolar due to its symmetry. CS2, on the other hand, is a linear molecule with two nonpolar bonds and is nonpolar overall.
Polarity is an important concept in chemistry, as it affects a molecule's physical and chemical properties, including its solubility, boiling and melting points, and reactivity. Polar molecules have an uneven distribution of charge, with one end of the molecule being slightly positive and the other end slightly negative.
Nonpolar molecules have an even distribution of charge and do not have a dipole moment. The polarity of a molecule depends on its molecular geometry and the polarity of its individual bonds.
Learn more about molecular polarity
brainly.com/question/29869649
#SPJ11
draw the ideal barium titanate structure
For a visual representation of the ideal barium titanate structure, I recommend referring to scientific literature or online resources that provide crystal structure diagrams.
Can you provide a visual representation of the ideal barium titanate structure?I am unable to draw images or provide visual representations. I can describe the ideal barium titanate structure for you.
Barium titanate (BaTiO3) has a perovskite crystal structure, which is a common structure for many ceramic materials.
In the ideal perovskite structure of BaTiO3, it consists of a three-dimensional arrangement of ions.
The Ba2+ ions occupy the center of the unit cell, surrounded by oxygen (O2-) ions at each corner, forming an octahedral coordination.
The Ti4+ ions are located at the center of the octahedron formed by the oxygen ions.
This arrangement creates a repeating pattern throughout the crystal lattice.
Please note that the ideal structure of barium titanate may vary in real samples due to factors such as crystal defects and impurities.
Learn more about scientific literature
brainly.com/question/8400781
#SPJ11
Place the following acids in order of increasing acid strength: Acid 1 Kg = 4.8 x 10-4 Acid 2 Kg = 1.0 x 10-5 Acid 3 Kg = 3.6 x 10-3 Acid 3 < Acid 2 < Acid 1 O Acid 3 < Acid 1 < Acid 2 O Acid 2 < Acid 3 < Acid 1 O Acid 1 < Acid 3 < Acid 2 O Acid 2 < Acid 1 < Acid 3 O Acid 1 < Acid 2 < Acid 3
The correct order of acids in the order of increasing acid strength is Acid 2 < Acid 1 < Acid 3.This is because the strength of an acid is determined by its dissociation constant (Ka) or its ability to donate hydrogen ions (H+). The lower the Ka value, the weaker the acid.
To place the given acids in order of increasing acid strength using their Ka values, you can follow these steps:
1. Compare the Ka values of the acids: Acid 1 (Ka = 4.8 x 10^-4), Acid 2 (Ka = 1.0 x 10^-5), and Acid 3 (Ka = 3.6 x 10^-3).
2. Recall that higher Ka values indicate stronger acids.In this case, Acid 2 has the lowest Ka value of 1.0 x 10-5, making it the weakest acid. Acid 1 has a Ka value of 4.8 x 10^-4, making it stronger than Acid 2 but weaker than Acid 1. Acid 1 has the highest Ka value of 3.6 x 10^-3 , making it the strongest acid among the three.
3. Arrange the acids in order of increasing Ka values.
Following these steps, the order of increasing acid strength is: Acid 2 < Acid 1 < Acid 3.
Learn more about acid strength : https://brainly.com/question/29608425
#SPJ11
(b) write the mechanism for step one of this reaction. show lone pairs and formal charges. only the acidic hydrogen should be drawn out with a covalent bond.
Without the specific details of the reaction, it is not possible to provide the mechanism, structures, and relevant information accurately.
What specific reaction or transformation are you referring to for step one of the mechanism?In order to provide the mechanism for step one of the reaction, I would need specific information about the reaction being referred to.
Please provide the details of the reaction or specify the specific transformation you are referring to, so that I can assist you in explaining the mechanism and drawing the relevant structures, lone pairs, formal charges, and covalent bonds.
Learn more about mechanism
brainly.com/question/31779922
#SPJ11
Aluminum metal crystallizes in a face-centered cubic unit cell. a. How many aluminum atoms are in a unit cell? b. What is the coordination number of each aluminum atom? c. Estimate the length of the unit cell edge, a, from the atomic radius of aluminum (1.43 Å). d. Calculate the density of aluminum metal.
The density of aluminum metal is 9.692 g/cm3.
Density is an important concept to understand when it comes to matter and materials. It is the measure of how much mass is contained within a given unit of volume.
Density can vary greatly depending on the composition of the material, and understanding this concept can help us to understand how materials interact with each other.
Aluminum is a lightweight metal with an atomic mass of 26.98 g/mol. It crystallizes in a face-centered cubic unit cell and has an atomic radius of 143.2 pm.
To calculate the density of aluminum, we can use the equation: density = mass/volume.
The volume of a face-centered cubic unit cell is calculated as (4π/3)×(atomic radius)3 = (4π/3)×(143.2 pm)3 = 2.77 x 10-23 cm3.
Therefore, the density of aluminum is 26.98 g/mol / 2.77 x 10-23 cm3 = 9.692 g/cm3.
To know more about face centered cubic unit cell here
https://brainly.com/question/28141547
#SPJ4
in cell notation, the information is typically listed in which order?
In cell notation, the information is typically listed in the following order:
anode | anode solution (anolyte) || cathode solution (catholyte) | cathode
where "||" represents the salt bridge or other type of separator between the anode and cathode solutions. The anode is on the left-hand side and the cathode is on the right-hand side.
The oxidation half-reaction occurs at the anode, and the reduction half-reaction occurs at the cathode. The concentrations and physical states of the reactants and products are usually included in the notation, along with any electrodes and other pertinent information.
To know more about anolyte refer here
https://brainly.com/question/11481532#
#SPJ11
what mass of solute is required to produce 550.5 ml of a 0.269 m solution of kbr?
The mass of solute is required to produce 550.5 ml of a 0.269 m solution of KBr is 16.02 grams.
To calculate the mass of solute required to produce a 0.269 m solution of KBr in 550.5 mL, we need to use the formula:
m = M × V × MW
Where:
m = mass of solute (in grams)
M = molarity of solution (in moles per liter)
V = volume of solution (in liters)
MW = molecular weight of solute (in grams per mole)
First, we need to convert the volume of the solution from milliliters to liters:
550.5 mL = 0.5505 L
Next, we need to calculate the molarity of the solution:
0.269 m = 0.269 moles/L
The molecular weight of KBr is 119.0 g/mol.
Now we can substitute the values into the formula:
m = 0.269 moles/L × 0.5505 L × 119.0 g/mol
m = 16.02 g
Therefore, 16.02 grams of KBr are required to produce 550.5 mL of a 0.269 m solution.
Learn more about mass: https://brainly.com/question/29482678
#SPJ11
how many minutes are required to deposit 2.21 g cr from a cr³⁺(aq) solution using a current of 2.50 a? (f = 96,500 c/mol)
It would take approximately 133.8 minutes to deposit 2.21 g of Cr from a Cr³⁺(aq) solution using a current of 2.50 A.
To calculate the number of minutes required to deposit 2.21 g of Cr from a Cr³⁺(aq) solution using a current of 2.50 A, we need to use Faraday's law of electrolysis. According to this law, the amount of substance deposited during electrolysis is directly proportional to the quantity of electric charge passed through the electrolytic cell.
The formula for Faraday's law is:
m = (I * t * M) / (n * F)
where m is the mass of substance deposited, I is the current, t is the time, M is the molar mass of the substance, n is the number of electrons transferred in the reaction, and F is the Faraday constant.
For the given question, we need to solve for t. We know the values of I (2.50 A), m (2.21 g), M (chromium has a molar mass of 52 g/mol), n (the oxidation state of Cr changes from +3 to 0, which means 3 electrons are transferred), and F (96,500 C/mol).
Plugging in these values, we get:
t = (m * n * F) / (I * M)
t = (2.21 g * 3 * 96,500 C/mol) / (2.50 A * 52 g/mol)
t = 8028 s or 133.8 minutes (rounded to two decimal places)
Therefore, it would take approximately 133.8 minutes to deposit 2.21 g of Cr from a Cr³⁺(aq) solution using a current of 2.50 A.
To know more about solution click here:
https://brainly.com/question/30665317
#SPJ11
The conversion of fumarate to malate has a AG'º = -3.6 kJ/mol. Calculate the equilibrium constant (keq) for this reaction.
The equilibrium constant (K) for the conversion of fumarate to malate is approximately 3.93. This indicates that the reaction favors the formation of malate at equilibrium.
The relationship between the standard free energy change (ΔG°), the equilibrium constant (K), and the standard free energy change per mole of reaction (ΔG°' ) is given by the following equation:
[tex]ΔG° = -RTlnK[/tex]
where R is the gas constant (8.314 J/(mol*K)), T is the temperature in Kelvin, and ln represents the natural logarithm.
Given that ΔG°' = -3.6 kJ/mol, we can convert it to joules per mole using the following conversion factor: 1 kJ/mol = 1000 J/mol.
[tex]ΔG°' = -3.6 kJ/mol = -3600 J/mol[/tex]
The temperature is not given, so we will assume a standard temperature of 298 K (25°C).
[tex]ΔG° = -RTlnK[/tex]
[tex]-3600 J/mol = -8.314 J/(mol*K) * 298 K * lnK[/tex]
Simplifying and solving for K, we get:
[tex]lnK = (-3600 J/mol) / (-8.314 J/(mol*K) * 298 K)[/tex]lnK = 1.369
K = e^(lnK)
K = e^(1.369)
K ≈ 3.93
Therefore, the equilibrium constant (K) for the conversion of fumarate to malate is approximately 3.93.
For more such questions on fumarate
https://brainly.com/question/8792394
#SPJ11
The standard free energy change for a reaction is related to the equilibrium constant (K) of the reaction through the following equation:
ΔG° = -RT ln K
where R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, and ln represents the natural logarithm.
For the given reaction:
fumarate ⇌ malate
The standard free energy change is:
ΔG'° = -3.6 kJ/mol
To find the equilibrium constant (K), we rearrange the equation to solve for K:
K = e^(-ΔG'°/RT)
where e is the base of the natural logarithm (2.71828).
Assuming a temperature of 298 K (25°C), we can substitute the given values to calculate the equilibrium constant:
K = e^(-ΔG'°/RT) = e^(-(-3.6 × 10^3 J/mol)/(8.314 J/mol K × 298 K)) = e^(1.4) = 4.05
Therefore, the equilibrium constant for the conversion of fumarate to malate is 4.05 at 25°C.
Learn more about free energy here:
https://brainly.com/question/15319033
#SPJ11
how many grams of silver metal are produced from ag⁺(aq) in 1.90 h with a current of 3.50 a? (f = 96,500 c/mol) 1 3 . 4
We can use the equation:
mass of substance = (current × time × atomic mass) / (faraday × n)
where:
current = 3.50 A
time = 1.90 hours = 6840 s
atomic mass of silver (Ag) = 107.87 g/mol
faraday constant (f) = 96,500 C/mol
n = number of electrons transferred per ion, which is 1 for Ag⁺ → Ag reduction
Substituting the values, we get:
mass of Ag = (3.50 A × 6840 s × 107.87 g/mol) / (96,500 C/mol × 1)
= 3.40 g
Therefore, 3.40 grams of silver metal are produced.
To know more about grams of silver metal, refer here
https://brainly.com/question/25126294#
#SPJ11
enter your answer in the provided box. calculate the ph of a 0.19 m methylamine solution. ph =
The pH of the 0.19 M methylamine solution is the 0.65.
The chemical equation is :
CH₃NH₂ + H₂O ⇄ CH₃NH₃⁺ + OH⁻
Initial: 0.19 0 0
Change: -x +x +x
Equilibrium: 0.19 -x +x +x
Kb = [CH₃NH₃⁺][OH⁻] / [CH₃NH₂]
Kb = x² / 0.19 - x
5.0 × 10⁻⁴ = x² / 0.19
x = 1.07 × 10⁻²M
The concentration of the H⁺ ions is in excess :
The H⁺ ions = 1.07 × 10⁻² - 0.19 = 0.2193 M
The expression for the pH is :
pH = - log(H⁺)
pH = - log (0.2193)
pH = 0.65
To learn more about pH here
https://brainly.com/question/2288405
#SPJ4
The accepted value for Ag2CrO4 is 1.1 x 10 -12. Calculate the percent error in your experimentally determined value of Ksp: 4.9 x 10-10.
To calculate the percent error in the experimentally determined value of Ksp, we need to first calculate the difference between the experimental value and the accepted value. The accepted value for Ag2CrO4 is 1.1 x 10-12, and the experimentally determined value is 4.9 x 10-10.
The difference between these two values can be calculated as follows:
1.1 x 10-12 - 4.9 x 10-10 = -4.8989 x 10-10
Next, we need to calculate the absolute value of this difference:
| -4.8989 x 10-10 | = 4.8989 x 10-10
Finally, we can calculate the percent error using the formula:
(percent error) = (|experimental value - accepted value| / accepted value) x 100
Substituting the values we calculated:
(percent error) = (4.8989 x 10-10 / 1.1 x 10-12) x 100 = 44.53%
Therefore, the percent error in the experimentally determined value of Ksp is 44.53%. This indicates that the experimental value is significantly different from the accepted value, and suggests that there may have been errors in the experimental procedure or calculations.
To know more about Ksp visit:
https://brainly.com/question/31388983
#SPJ11
the radioactive isotope 237th90 has a rate constant of, k = 4.91 x 10^-11 yr^-1. is this nuclide useful for determining the age of bone samples?
Nuclear reactors in nuclear power plants use uranium-235 as a fuel to produce energy. A radioactive hydrogen isotope called tritium is used to locate leaks in underground water pipes. 237 th 90 is not a useful isotope for dating bone samples that are millions of years old.
Radioactive isotopes are isotopes with unstable nuclei that spontaneously produce radiation in the form of alpha, beta, and gamma rays to release surplus energy. There are one or more radioactive isotopes for every chemical element.
The radioactive isotope 237 th 90 has a relatively short half life of 4.8 days which means that it decays relatively quickly. As a result it is not typically used for determining the age of bone samples which requires isotopes with longer half lives.
To know more about radioactive isotope, visit;
https://brainly.com/question/20596678
#SPJ1
What is the product of the following nuclear reaction?
23692U → 4 10n + 13653I + ?
a, 9841Nb
b. 9638Sr
c. 9039Y
d. 9640Zr
e. 9639Y
The answer to the question is option e. The product of the given nuclear reaction is 9639Y.
In the given nuclear reaction, one uranium-236 atom undergoes fission and splits into four neutrons, one iodine-136 atom, and one unknown product. We need to identify the element formed as the unknown product.
To do this, we can use the principle of conservation of mass and charge. The mass number and atomic number on both sides of the reaction must be equal.
On the left-hand side of the reaction, we have a uranium-236 atom with a mass number of 236 and an atomic number of 92. On the right-hand side, we have four neutrons which have no atomic number and a mass number of 4, an iodine-136 atom with an atomic number of 53 and a mass number of 136, and the unknown product with an atomic number and mass number we need to determine.
The sum of the mass numbers of the products on the right-hand side is 4 + 136 + (atomic mass of the unknown product). The sum of the atomic numbers on the right-hand side is 0 + 53 + (atomic number of the unknown product).
Equating the mass numbers and atomic numbers on both sides, we get:
236 = 4 + 136 + (atomic mass of the unknown product)
92 = 0 + 53 + (atomic number of the unknown product)
Solving these equations, we get:
Atomic mass of the unknown product = 96
Atomic number of the unknown product = 39
So the unknown product is an element with atomic number 39, which is yttrium (Y). The atomic mass of this Y is 96, which means it has 57 neutrons.
To learn more about nuclear reaction visit:
brainly.com/question/16526663
#SPJ11
what is the longest-wavelength line in nanometers in the infrared series for hydrogen where m = 3?
The longest-wavelength line in the infrared series for hydrogen where m = 3 is known as the Paschen series.
The Paschen series corresponds to the transitions where the electron moves from a higher energy level to the third energy level (n=3). The formula for calculating the wavelength of a line in the Paschen series is given by λ = 1.096776 × 10^-2 (1/3^2 - 1/m^2) meters. To convert this to nanometers, we can multiply by 10^9. When m=4, the longest-wavelength line in the Paschen series is 1093.33 nanometers.
Therefore, the answer to the question is that the longest-wavelength line in nanometers in the infrared series for hydrogen where m = 3 is not defined since the Paschen series begins at m = 4.
To know more about Paschen series visit:
https://brainly.com/question/13434989
#SPJ11
if the standard solutions had unknowingly been made up to be 0.0024 m agno3 and 0.0040 m k2cro4 , what would be the value of ksp?
To determine the value of the solubility product constant (Ksp), we need to use the concentrations of the ions in the solution and the balanced chemical equation for the dissolution of the salt.
In this case, the balanced equation for the dissolution of AgNO3 and K2CrO4 is:
2AgNO3 (aq) + K2CrO4 (aq) -> Ag2CrO4 (s) + 2KNO3 (aq)
The stoichiometry of the balanced equation tells us that one mole of Ag2CrO4 is formed for every two moles of AgNO3 and one mole of K2CrO4.
Given the concentrations of AgNO3 and K2CrO4 as 0.0024 M and 0.0040 M, respectively, we can calculate the concentration of Ag2CrO4 that would be formed:
Ag2CrO4 (s): 0.0024 M x (1/2) = 0.0012 M
KNO3 (aq): 0.0024 M x (2/2) = 0.0024 M
The Ksp expression for Ag2CrO4 is [Ag2CrO4] = [Ag+]^2[CrO4^2-]. Since the stoichiometry of the balanced equation shows that the concentration of Ag2CrO4 is 0.0012 M, we can substitute the values into the Ksp expression:
Ksp = [Ag+]^2[CrO4^2-] = (0.0012)^2(0.0040) = 1.728 x 10^-9
Therefore, the value of Ksp for the given concentrations of AgNO3 and K2CrO4 is 1.728 x 10^-9.
To learn more about ksp:
https://brainly.com/question/31388983
#SPJ11
Give the formula for pentaaquacyanidochromium(III) bromide:
The formula for pentaaquacyanidochromium(III) bromide is [Cr(H2O)5Br] (CN) or [Cr(H2O)5Br(CN)5].
The formula for pentaaquacyanidochromium(III) bromide is [Cr(H2O)5Br] (CN) or [Cr(H2O)5Br(CN)5]. This complex ion consists of a central chromium(III) ion coordinated to five water molecules, one bromide ion, and five cyanide ions. The bromide ion and the five cyanide ions act as ligands and attach themselves to the central chromium(III) ion through coordinate covalent bonds. The water molecules are also coordinated to the central ion, but through hydrogen bonds. The pentaaquacyanidochromium(III) bromide compound is often used in inorganic chemistry experiments to demonstrate the effects of ligand substitution reactions.
To know more about formula visit: https://brainly.com/question/29886204
#SPJ11
which one of the following compounds has the highest boiling point? group of answer choices a.v b. ii c. iii d. iv e. i
The main answer to the question is option B (ii). This is because the boiling point of a compound depends on the strength of intermolecular forces between its molecules.
Option B (ii) has the highest boiling point because it is a polar molecule with hydrogen bonding between its molecules, which is the strongest intermolecular force. Option A (v) and option D (iv) are nonpolar molecules and have weaker intermolecular forces, resulting in lower boiling points. Option C (iii) has dipole-dipole forces but not hydrogen bonding, so its boiling point is higher than options A and D but lower than option B. Option E (i) is a nonpolar molecule with the lowest boiling point among all the options.
on which compound has the highest boiling point, I need the specific compound names or their chemical formulas corresponding to the given choices (a.v, b.ii, c.iii, d.iv, e.i). Please provide the compound information, and the main answer and an explanation.
For more information on intermolecular forces visit:
https://brainly.com/question/9007693
#SPJ11
Treatment of D-mannose with methanol in the presence of an acid catalyst yields four isomeric products having the molecular formula C7H14O6. What are these four products?
The four isomeric products yielded by the treatment of D-mannose with methanol in the presence of an acid catalyst are 1,2;3,4;2,3;4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexanes.
When D-mannose is treated with methanol and an acid catalyst, it undergoes methylation at the hydroxyl group present on its molecule. Methylation is the addition of a methyl group (-CH3) to a molecule. As there are several hydroxyl groups present on the D-mannose molecule, methylation can occur at any of these hydroxyl groups. Therefore, multiple isomers are formed as a result of this reaction. In this case, four isomers are formed, which have the molecular formula C7H14O6.
In the isomer 1,2-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 1 and 2. In the isomer 3,4-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 3 and 4. In the isomer 2,3-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 2 and 3. In the isomer 4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexane, the methyl groups are attached to the carbon atoms at positions 4 and 5.
In summary, the treatment of D-mannose with methanol in the presence of an acid catalyst yields four isomeric products with the molecular formula C7H14O6. These isomers differ in the position of the methyl groups on the D-mannose molecule, and they are 1,2;3,4;2,3;4,5-pentamethoxy-1,2,3,4,5-pentahydroxyhexanes.
To learn more about isomers visit:
brainly.com/question/13422357
#SPJ11
complete the following table for an ideal gas: p v n t 2.00 atm 1.20 l 0.520 mol ? k 0.280 atm 0.240 l ? mol 22 ∘c 660 torr ? l 0.334 mol 370 k ? atm 565 ml 0.260 mol 295 k
To complete the table for an ideal gas, P = (0.260 mol * R * 295 K) / (0.565 L) ; P ≈ 4
p = 2.00 atm, V = 1.20 L, n = 0.520 mol
(2.00 atm)(1.20 L) = (0.520 mol)(R)(T)
R = 0.0821 L·atm/(mol·K) for ideal gases.
(2.00 atm)(1.20 L) = (0.520 mol)(0.0821 L·atm/(mol·K))(T)
T = (2.00 atm)(1.20 L) / [(0.520 mol)(0.0821 L·atm/(mol·K))] = 57.41 K
p = 0.280 atm, V = 0.240 L, n = ?, and T = 22 °C.
T = 22 °C + 273.15 = 295.15 K.
(0.280 atm)(0.240 L) = n(R)(295.15 K)
n: n = (0.280 atm)(0.240 L) / [(R)(295.15 K)]
p = 660 torr, V = ?, n = 0.334 mol, and T = 370 K.
V: V = (0.334 mol)(R)(370 K) / (0.8684 atm)
p = ?, V = 565 mL, n = 0.260 mol, and T = 295 K.
p: p = (0.260 mol)(R)(295 K) / (0.565 L)
p | v | n | t
2.00 atm | 1.20 L | 0.520 mol | 57.41 K
0.280 atm| 0.240 L | ? mol | 22 °C
660 torr | ? L | 0.334 mol | 370 K
? atm | 565 mL | 0.260 mol | 295 K
The missing value of V in row 3 can be calculated by rearranging the ideal gas law equation and solving for V. PV = nRT
P * (565 mL) = (0.260 mol) * R * (295 K)
P = (0.260 mol * R * 295 K) / (565 mL)
Now we can convert mL to L:
P = (0.260 mol * R * 295 K) / (0.565 L)
P ≈ 4
To learn more about ideal gas
brainly.com/question/30236490
#SPJ4
using hess's law, calculate δh° for the process: sb (s) cl2 (g) sbcl5 (s) from the following information: sb (s) cl2 (g) sbcl3 (s) δh° = − 314 kj sbcl3 (s) cl2 (g) sbcl5 (s) δh°= − 80 kja. -290 KJb. -394 KJc. +394 KJd. -234 KJe. +234 KJ
When, using Hess's law, the ΔH° for this process is -394 kJ. Option B is correct.
Hess's law is a principle in chemistry that states that the enthalpy change of a chemical reaction is independent of the pathway between the initial and final states. In other words, if a reaction can occur via multiple routes, the total enthalpy change for the reaction will be the same regardless of the pathway taken.
The overall reaction is;
Sb(s) + 2Cl₂(g) → SbCl₅(s)
We can break down into two steps;
Sb(s) + Cl₂(g) → SbCl₃(s) ΔH° = -314 kJ/mol
SbCl₃(s) + Cl₂(g) → SbCl₅(s) ΔH° = -80 kJ/mol
To get the overall reaction, we can add the two equations together:
Sb(s) + 2Cl₂(g) → SbCl₅(s) ΔH° = -394 kJ/mol
Therefore, the ΔH° is -394 kJ/mol.
Hence, B. is the correct option.
To know more about Hess's law here
https://brainly.com/question/26491956
#SPJ4
--The given question is incomplete, the complete question is
"Using Hess's law, calculate δh° for the process: sb (s) Cl₂ (g) SbCl₅ (s) from the following information: sb (s) Cl₂ (g) sbcl3 (s) δh° = − 314 kj sbcl₃ (s) Cl2 (g) SbCl₅ (s) δh°= − 80 kja. A) -290 KJb. B) -394 KJc. C) +394 KJd. D) -234 KJe. E) +234 KJ."--