Answer:
Below
Explanation:
To fall 1.8 m the time will be found with :
d = 1/2 a t^2
1.5 = 1/2 ( 9.81) t^2 shows t = .55 s
in this .55 s it travels .8 m horizontally
Horizontal velocity = .8 m / .55 s = 1.45 m/s
When it hits the ground , horizontal velocity will still be 1.45 m/s
vertical velocity will be v = at = 9.81 m/s^2 * .55 = 5.42 m/s
someone help!!
What is speed? the distance an object will move the ability of an object to move the measure of force required to move something the time it takes an object to go a cert
Answer:
Speed is the measure of how fast something moves
Explanation:
To protect yourself from being electrocuted by contact with overhead power lines, you should always assume overhead lines are energized and keep yourself and equipment and at least ________ away from power lines up to 50KV
Keep equipment and yourself at least 10 feet away from power lines carrying high voltage up to 50KV.
Which of the following components of PPE can guard against electrocution?Safety glasses, face shields, hard hats, insulated boots, rubber gloves with leather protectors, insulating sleeves, and fire clothing are among the personal protective equipment (PPE) that must be worn when working near power lines depending on the job task. This lowers the risk of electrocution.
Which power line safety precautions are recommended?Assume that overhead electricity wires are active and keep a minimum of 10 feet away from them. When operating close to power lines, de-energize and ground them. When working close to electricity lines, use fiberglass or wood ladders that are non-conductive.
To know more about voltage visit:
brainly.com/question/29445057
#SPJ4
A sound wave generated by a musical note has the characteristics presented in the table. What is the missing value?
Air 346 55 6. 3
Glass 5,640 55 102
Brass 4,700 55 ?
A.
112
B.
100
C.
85
D.
98
The missing value is D. 98
The table provides information about the speed (m/s), frequency (Hz), and wavelength (m) of a sound wave generated by a musical note, in different mediums (air, glass, and brass). The frequency of the sound wave is constant across the three mediums, but the speed and wavelength will vary depending on the medium. Since we know the frequency and wavelength, we can use the formula:
Speed = Frequency x Wavelength
to find the missing value of the speed of the sound wave in brass.
4,700 = 55 x Wavelength
Wavelength = 4,700/55 = 85.818...
So the missing value is 98 (approximately) in the table.
Learn more about sound waves here: https://brainly.com/question/1199084
#SPJ4
4. A 9.35 kg bowling ball would require what force to accelerate it down an alleyway at
a rate of 3.12m/s²?
The force needed is 29.2 N.
To calculate the force needed to accelerate a 9.35 kg bowling ball at a rate of 3.12 m/s²,
you can use the equation F = ma, where F is the force, m is the mass of the object (in this case, the bowling ball), and a is the acceleration. Putting in the values, you get:
F = (9.35 kg) x (3.12 m/s²)
= 29.2 N
This works out to be approximately 29.2 Newtons of force.
To know about numericals related to this topic:-
https://brainly.com/question/29790570
Glands that excrete salt in the mangroves are examples of
Glands that excrete salt in the mangroves are examples of adaptions.
What is adaptions?The meaning of adaptation implies how a species changes its body and behaviour to better suit its natural environment. There are an estimated 8.7 million species currently living on earth. They are found across a wide and diverse natural environment, ranging from frozen and desolate Arctics to the sweltering sands of the Sahara.The natural environment is an ever-changing feature of planet earth. The process of adaptation ensures that the species which adapts the most, survive.Read on to explore plant and animal adaptations across the wide ranges of landscapes.In biology, adaptation has three related meanings. Firstly, it is the dynamic evolutionary process of natural selection that fits organisms to their environment, enhancing their evolutionary fitness. Secondly, it is a state reached by the population during that process.
To learn more about population refer to:
https://brainly.com/question/25630111
#SPJ1
If a dolphin is producing a vocalization with a frequency of 35 Hz, traveling at 1,470 m/s, what is the wavelength of the soun
According to the equation wavelength = speed/frequency, the dolphin's sound has a 42 m wavelength.
What does wavelength mean?The distance between two identification based (consecutive crests) in adjoining cycles of a waveform signal as it travels across space or along wire is known as its wavelength. In wireless systems, this length is frequently specified in metres (m), centimetres (cm), or millimeters (mm). The numbers of times per second that a sound waves wave repeats is its frequency, which is often referred to as its pitch.
Given data -
speed = 1,470 m/s
frequency = 35 Hz
wavelength = speed / frequency
wavelength = 1,470 / 35
wavelength = 42 m.
To know more about wavelength visit :-
https://brainly.com/question/7143261
#SPJ4
Which causes the biggest problem in detecting infrared photons from an astronomical object?
a. smog
b. carbon dioxide
c. water vapor
d. light pollution
The correct option is C ; Water vapor , Water vapour is water that is gaseous rather than liquid. It can be generated by either evaporation or sublimation.
Water vapour, unlike clouds, fog, or mist, which are just suspended particles of liquid water in the air, cannot be seen since it is in gaseous form.
Water vapor has the same chemical formula as regular water - H2O - but the water molecules in vapor interact with each other less and are not as organized as they are in water and ice. Pressure, temperature, and relative humidity all influence whether water is liquid or gas.
Learn more about to Water vapor
https://brainly.com/question/14529481
#SPJ4
Two students have volunteered to explore the galaxy in a spaceship. As they travel through space, they measure the magnitude of the gravitational force between their spaceship and the earth they find that the gravitational force on the spaceship is-
The gravitational pull on the spacecraft is discovered to be inversely proportional to the distance from the Earth.
If the gap were cut in half, the gravitational attraction would be more powerful. According to Coulomb's rule, the gravitational force between any two things in the universe is inversely proportional to the sum of their respective masses.
The gravitational force between two things in the cosmos is calculated as being inversely proportional to their distance from one another. Gravity is the force that holds two bodies together, body present or not.
A force that is directly inversely correlated to the square of the distance between bodies and directly inversely correlated to their product draws every body in the universe toward every other body.
Thus , Inversely related to the separation from the Earth.
To know more about gravitational pull
https://brainly.com/question/8990197
#SPJ4
What theorem is presented based on the structure of the baseball field?
Pythagorean Theorem to determine the gap between second base and home plate.
Explain the pythagorean theorem.The Pythagorean theorem and the coordinates of the two locations are used in the distance formula to determine the distance between them. The formula below can be used to determine the length of AB if A and B make up the hypotenuse of a right triangle: Leg2 plus Leg2 equals Hypotenuse 2.
measured from the middle of the backstop to the apex of home plate. Place second base in centre by drawing a line from the backstop's centre point over the pitcher's mound, through the apex. The distance that needs to be measured is between the centre of second base and the top of home plate.
The square root of (a,c)2 + (b,d)2 is used to calculate the distance between the points (a,b) and (c,d). The distance between points (a, b, c) and (d, e, f) in three dimensions is equal to the square root of (a, d), (b, e), and (c, f).
To learn more about Pythagoras theorem visit:
brainly.com/question/343682
#SPJ4
10 points!
Which measuring tool should be used to measure the length of a marble track?
graduated cylinder
spring scale
metric ruler
stopwatch
Answer:
metric ruler
Explanation:
it counts legnth
How do the overload and progression principles work together for strength training?
If you are exercising with a specific goal in mind, such as improved strength or cardio fitness. Exercise training's guiding principles include overload, recuperation, progression, reversibility, and specificity.
Your muscles will remain challenged and you'll get stronger if you change or advance your workouts.
To get the most out of any training programme, you must follow certain rules. You won't benefit much from your workouts if you don't adhere to these rules. Exercise training's guiding principles include overload, recuperation, progression, reversibility, and specificity. The concept of specificity is especially important if your exercise programme is designed to help you achieve a particular goal, like increased strength or improved aerobic fitness.
To know more about training:
https://brainly.com/question/29616285
#SPJ4
At an amusement park there is a ride in which cylindrically shaped chambers spin around a central axis. People sit in seats facing the axis, their backs against the outer wall. At one instant the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back. What is the radius of a chamber
When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.
The radius of the chamber can be calculated using the equation
F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.
Plugging in these values, we get
r= mv²/F
r= 83×3²/545
r = 8.5 m.
Therefore, the radius of the chamber is 8.5 m.
Learn more about force:
https://brainly.com/question/25239010
#SPJ4
calculate the kinetic energy of a 50 kg object that is moving at a speed of 12 m/s
Hello there!
Answer:
3600 J
Explanation:
[tex]E = \frac{mv^2}{2}[/tex]
So m = 50 kg and v = 12 m/s then
[tex]E = \frac{50 * 12^2}{2} J = 3600 J[/tex]
Mass = 50 kg
Velocity = 12 m/s
FindThe kinetic energy of an object.
SolutionThe formula that is used to find the kinetic energy of an object is given by :
[tex]K = \frac{1}{2}mv^{2} \\K = \frac{1}{2} X 50 X 12^{2} \\K = \frac{1}{2} X 50 X 144[/tex]
Answer= 3, 600 JA helicopter blade spins at exactly 120 revolutions per minute. Its tip is 3.00 m from the center of rotation. (a) Calculate the average speed (in m/s) of the blade tip in the helicopter's frame of reference. m/s (b) What is its average velocity (in m/s) over one revolution
94.32m/s is the average speed (in m/s) of the blade tip in the helicopter's frame of reference.
What is the typical blade tip speed, measured in metres per second, when viewed from a helicopter perspective?We discover that the sub average is 73.3 metres per second after entering this formula into our calculator and finding it to three significant numbers. The helicopter blade tip travels at an average speed of that.
How quickly does the blade tip typically move?After one revolution, the blade point has moved nothing since it goes back to its original position. The average velocity is consequently zero.
FPM = RPM x . 262 x Blade Diameter (inches).
FPM = 120 x . 262 x 3.00 = 94.32m/s
To know more about average speed visit:-
https://brainly.com/question/12322912
#SPJ4
Two spherical objects have masses of 8,000 kg and 5.0 kg. Their centers are separated by a distance of 1.5 m. Find the gravitational attraction between them.
The gravitational force of attraction between them is 3.56 * 10⁻⁴ N
What is Gravitational attraction?F = G*M1M2/d²,
where G = 6.67 * 10⁻¹¹ Nm²Kg⁻²,
M1 = 8000Kg and M2 = 1500 Kg,
F = 6.67 * 10⁻¹¹ * 8000 * 1500 / (1.5)² F = 3.56 * 10⁻⁴ N
The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.
The universal gravitational law of Newton. According to this law, every body in the universe is attracted to every other body with a force that is inversely proportional to the square of the distance between them and proportional to the product of their masses.
Therefore, The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.
To learn more about Gravitational force, refer to the link:
https://brainly.com/question/12528243
#SPJ1
The question states "The amplitude of a body undergoing simple harmonic motion is doubled. Which of the following is also doubled?
a) maximum speed
b) frequency
c) total energy
d) period
When the amplitude of a body undergoing simple harmonic motion is doubled then the maximum speed is doubled.
Equation of shm is
x(t) = Xo + Acos(wt + f)
Differentiate it with t
v(t) = wA * sin(wt + f)
Then max speed Vmax is wA
So by above relation if we double the amplitude then velocity will be doubled.
If the force acting on the oscillating body is always in the direction opposite to the displacement of the body from the equilibrium or the mean position and its magnitude is proportional to the magnitude of displacement, the body is said to be executing SHM.
If the displacement vs. time curve of the oscillating body is sinusoidal in nature, the body is said to be executing SHM. This is another definition of SHM.
If the potential energy of the oscillating body is proportional to the square of its displacement with reference to the mean position, the body is said to be executing SHM. This is yet another definition of SHM.
To know more about simple harmonic motion here
https://brainly.com/question/23603440
#SPJ4
How do you calculate sound intensity level?
Sound intensity level (SIL) is measured in decibels (dB).
What is sound?
Sound is a type of energy created by the vibration of particles in a medium, such as air, that can be heard when it reaches a person or animal's ear. Sound can travel through solids, liquids, and gases, and can have different pitches and volumes.
Sound intensity level is defined as the ratio of the sound pressure to a reference pressure level. It is calculated using the following equation: SIL (dB) = 10 log10 (I/I_0), where I is the sound intensity and I_0 is the reference sound intensity equal to 10^−12 W/m^2.
To know more about sound,
https://brainly.com/question/29159910
#SPJ4
Two ropes are tied to a steel ring, and a student holds the free end of each rope. The students then pull on the ropes in a tug-of-war. If the forces exerted by the students are unbalanced, what happens to the ring ?
A. The ring remains at rest.
B. The ring moves at a constant velocity.
C. The ring accelerates in the direction of the net unbalanced force.
D. The ring accelerates in the direction opposite the net unbalanced force.
The ring accelerates in the direction of the net unbalanced force. Thus option C is the correct answer.
According to Newton's second law of motion, the net force acting on an object is equal to the mass of the object multiplied by its acceleration. If the forces exerted by the two students in the tug-of-war are unbalanced, there will be a net force acting on the steel ring.
The direction of this net force will be in the direction of the stronger force. As a result, the ring will accelerate in the direction of the net unbalanced force. This means that the ring will begin to move, and its velocity will change as long as the net force is applied.
Since the steel ring is accelerating, it can no longer be at rest, and it will not move at a constant velocity. The ring will move in the direction of the stronger force until the forces exerted by the students are balanced again.
To learn more about Force,
https://brainly.com/question/28012687
#SPJ4
A particular power source creates electricity through the use of giant magnets that are rotated to create a flow of electrons. This electricity is then directed:
This electricity is then directed from the electric generator to electric outlets in homes
A power source that creates electricity through the use of giant magnets that are rotated to create a flow of electrons is called a generator. Generators use the principle of electromagnetic induction to convert mechanical energy (rotational energy of the magnets) into electrical energy.The electricity generated by the generator is then directed through electrical transmission lines to a substation, where it is transformed to a higher voltage level for long-distance transmission. Then it is distributed to homes and businesses through power lines and transformers.
Learn more about mechanical energy here:
https://brainly.com/question/28928306
#SPJ4
The distance from the acoustic center of the source to the point at which the intensity of the direct sound equals that of the reverberant field describes
Critical distance is defined as the distance between the acoustic center of the source and the point at which the intensity of the direct sound equals that of the reverberant field.
The distance from a sound source when the direct energy (energy radiated straight from the source) equals the reverberant energy (radiated from walls, floor, and ceiling) is called critical distance. It can be said as the critical distance is the distance between the microphone and the sound source at which the level of room reverberation is equal to the level of the direct sound. Critical distance is considered an important factor in positioning loudspeakers and microphones.
You can learn more about distance at
https://brainly.com/question/9364505
#SPJ4
Why is copper wire a better conductor of electricity than carbon fiber? (1 point)
A) Carbon (C) does not have any valence electrons.
B) Copper (Cu) is a metal, and only metals can conduct electricity.
C) The electrons in copper (Cu) are loosely bound to the nucleus.
D) Copper (Cu) has no loose electrons.
The copper wire a better conductor of electricity than carbon fiber because copper (Cu) is a metal, and only metals can conduct electricity option - B is correct answer.
Why does copper behave better as an electrical conductor?A metal has greater electrical conductivity the lower its resistivity level. And copper wire is an excellent electrical conductor because it has a low level of resistivity. Incredibly flexible is another quality of copper.
Carbon fiber still does not conduct electricity as well as metal, even after being treated with other materials. Though still about 100 times faster than carbon fiber treated with good electricity conductors, metals like silver, aluminum, and copper are particularly good at conducting electricity.
To know more about copper visit:
https://brainly.com/question/29493129
#SPJ1
Answer:
1. The electrons in copper (Cu) are loosely bound to the nucleus. (C.)
2. An electrical current that flows in one direction (D.)
3. aluminum (Al) (D.)
4. Opposite charges attract one another. (D.)
5. Atoms with a nearly empty valence shell make good conductors. (C.)
Explanation:
I did the Connections Academy test (Conductors and Insulators Quick Check)
How does mass affect the heat that can be absorbed by a substance?
The mass of the material has no influence on specific heat because it is already a quantity represented per unit mass.
Casey Hudson, Drew Karpyshyn, and Preston Watamaniuk created the military science fiction media franchise Mass Effect. The franchise shows a distant future in which humans and many alien civilizations have conquered the known universe utilizing advanced predecessor civilizations' technologies.
The franchise began with a series of video games created by BioWare and released by Electronic Arts. Each iteration combines third-person shooting gameplay with role-playing features. The first three games comprise a trilogy in which the player character, Commander Shepard, strives to defend the Milky Way galaxy from the Reapers, a species of ancient, sleeping robots.
Learn more about mass affect to visit this link
https://brainly.com/question/29760670
#SPJ4
What is the equation for torque used for lever arm and F for force?
The required equation for torque used for lever arm r and F for force is given as τ = |r| |F| sinθ.
A simple way to calculate the magnitude of the torque is to first determine the lever arm and then multiply by the times of applied force.
The lever arm is described as the perpendicular distance from axis of rotation to the line of action of force.
The equation used to calculate torque is , τ = r × F = |r| |F| sinθ
where,
r is the magnitude of lever arm
F is the magnitude of force vector
θ is the angle between lever arm and force vectors
To know more about torque:
https://brainly.com/question/29271618
#SPJ4
After seeing the fur rubbed with the rod attract the neutral paper, imagine you had an instrument that lets you zoom in enough to see what the paper and rod are made of. Draw a model that shows what happens to the neutral paper to cause it to move towards the charged rod. Make sure to label everything in your model
Seeing the fur rubbed with the rod attracts neutral paper, this happens because the friction of the rod with the rubbed can produce a static electric force. It is this static electric force that causes the pieces of paper to be attracted and rod up.
If the rod or ruler has been rubbed into the hair, then brought closer to the paper, then the paper will lift and stick. Indeed, this can happen due to the presence of an electric charge. When you rub a plastic ruler over your hair, it becomes electrically charged, causing the paper to pull and stick.
The electric charge consists of two types of charge, namely negative charge, and positive charge. However, some objects have an equal amount of negative charge and positive charge. Objects that have the same amount of positive and negative charges are called neutral objects. Initially, a plastic ruler is also an electrically neutral object.
When you rub the ruler against dry hair, it gets an electric charge, because of that electric charge the plastic ruler can exert a force on the paper and pull it closer.
Learn more about the electric charge to the fur rubbed at https://brainly.com/question/389528
#SPJ4
How does Accenture myNav Green Cloud Advisor integrate sustainability?
Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.
by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.
Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.
reduces the expense of transportation
creates a design that is appropriate and aids the customer in becoming more sustainable.
establishes sustainable guidelines for disposing of outdated technology.
myNav Green Cloud Advisor assists businesses in developing cloud solutions that cut carbon emissions and create a platform for ethical innovation. Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions
To learn more about Accenture myNav from given link
https://brainly.com/question/26449898
#SPJ4
Draw the phasor for the emf = (170 V) cos ((2pi*60 Hz)t) at t = 60 ms. Tail at the origin.
Answer:
9798687564=-=-=97858
Explanation:oy 8gyf86 r = 76y
A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the ______, is a requirement of NEC 705.12(B).
A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the main circuit breaker, is a requirement of NEC 705.12(B).
What is a circuit's straightforward definition?A completed circular conduit through which electricity flows is known as a circuit in electronics. A simple circuit includes a current provider, conductors, and a load. The term "circuit" can broadly be used to describe any ongoing path via which electricity, information, or a signal might go.
Why are circuits essential?A channel for the transfer of electric current is known as an electric circuit. Electric energy is transferred to components that transform it into various types of energy that can perform work, such as supplying power to light, appliances, and other devices, when electrical current flows across a circuit.
To know more about Circuit visit :
brainly.com/question/27206933
#SPJ4
A 2.5-kg cart is rolling along a frictionless, horizontal track towards a 1.3-kg cart that is held initially at rest. The carts are loaded with strong magnets that cause them to attract one another. Thus, the speed of each cart increases. At a certain instant before the carts collide, the first cart's velocity is 4.6 m/s, and the second cart's velocity is -1.8 m/s. (a) What is the total momentum of the system of the two carts at this instant
The required total momentum of the system at this instant is calculated to be 9.16 kg m/s.
Given that,
Mass of the first cart, m₁ = 2.5 kg
Mass of the second cart, m₂ = 1.3 kg
Velocity of the first cart before collision, u₁ = 4.6 m/s
Velocity of the second cart before collision, u₂ = -1.8 m/s
The total momentum of the system before collision is calculated as follows,
P t = P₁ + P₂
P t = m₁ u₁ + m₂ u₂ = 2.5 × 4.6 + (1.3 × -1.8) = 11.5 - 2.34 = 9.16 kg m/s
Thus, total momentum of the system of the two carts at this instant is 9.16 kg m/s.
To know more about momentum:
https://brainly.com/question/22715086
#SPJ4
o, the point at which we lose awareness of the intervals and begin to see apparent motion seems to kick in at around ________ frames per second. 16 - 20
The point at which we lose awareness of the intervals and begin to see apparent motion seems to kick in at around 8 - 12 frames per second.
What is frames per second?The frequency (rate) at which consecutive images (frames) are captured or displayed is known as frame rate and is expressed in frames per second (FPS). The phrase is equally applicable to motion capture devices, computer graphics, and film and video cameras.
Frame frequency, also known as frame rate, is measured in hertz. Frame rate in electronic camera specifications may refer to the highest possible rate, whereas in practise, other settings (like exposure time), may reduce the frequency to a lower number.
Individual differences exist in both the type and properties of the visual stimulus as well as the temporal sensitivity and resolution of human vision. The human visual system can process 10–12 images per second, each of which is perceived individually; higher rates are interpreted as motion.
Learn more about frame rate
https://brainly.com/question/17453877
#SPJ4
Describe how you would find absolute pressure in a car tire if you had a barometer and a tire pump with an air
pressure gauge
The absolute pressure in a car tire can found by following method:
Pressure is the force per unit area applied toward a course perpendicular to the outer layer of an item. To keep it precise, it is an amount of force following up on a unit area. The SI unit for pressure is measured in Pascals (Pa). Other non-SI units are bar and PSI. There are two types of references to quantify pressure,
Gauge Pressure
Absolute Pressure
The most well-known pressure reference is Gauge Pressure which is connoted by a ‘g’ after the pressure unit, for example, 33 psi g. It is the pressure relative to barometric or atmospheric pressure; it is positive for pressures above atmospheric pressure and negative for pressures that are below atmospheric pressure. An Absolute pressure estimation is one that is alluded to as a perfect or an ideal vacuum. The best illustration of an absolute referenced pressure is the calculation of Barometric pressure. To deliver an absolute pressure sensor, one strategy is for a maker to seal a high vacuum behind the detecting diaphragm.Formula of Absolute pressure is given by:
p(a) = p(g) + p(atm)
Where ,
p(a) is absolute pressure,
p(g) is gauge pressure and
P(atm) is atmospheric pressure
To know more about pressure visit:
https://brainly.com/question/11150083
#SPJ1