Explain the tangible physical benefits of warming up for and cooling down from a workout activity.


i need it hurry

Answer:

124 grams of Na2O are required to produce 160 grams of NaOH.

Explanation:

The balanced chemical equation is: Na2O + H2O -> 2NaOH

From the equation, we can see that 1 mole of Na2O produces 2 moles of NaOH.

To find the amount of Na2O required to produce 160 grams of NaOH, we need to first calculate the number of moles of NaOH:

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Number of moles of NaOH = mass / molar mass = 160 g / 40 g/mol = 4 moles

Since 1 mole of Na2O produces 2 moles of NaOH, we need half as many moles of Na2O, which is 2 moles.

Finally, we can calculate the mass of Na2O required:

Molar mass of Na2O = 23 + 23 + 16 = 62 g/mol

Mass of Na2O = number of moles * molar mass = 2 moles * 62 g/mol = 124 g

Therefore, 124 grams of Na2O are required to produce 160 grams of NaOH.

If 28. 25 ml of 0.07439 M NaOH solution required to reach the endpoint in a KHP titration and the sample weight was 1. 1670 g, the % KHP is 36.76 %.

The volume of NaOH = 28.25 mL

The molarity of NaOH = 0.07439 M

The moles of NaOH = molarity × volume

                                  = 0.07439 × 0.02825

 The moles of NaOH = 0.00210 mol

The molar mass of KHP = 204.22 g/mol

The Mass of KHP = 0.00210 × 204.22

The mass of KHP = 0.429 g

% KHP = (0.429 / 1.1670 ) × 100 %

% KHP = 36.76 %

Thus, the % KHP  is 36.76 %.

To learn more about KHP here

https://brainly.com/question/14905157

#SPJ4

Long term (current) utilisation anticoagulants, ICD-10 code Z79. 01, is a medical classification listed by WHO under the range - Factors that affect the medical status and contact with healthcare.

In the United States, acceptance of ICD-10-CM was slow. Since 1979, the United States has required ICD-9-CM codes[2] for Medicare and Medicaid reimbursement claims, and indeed the majority of the American medical industry has followed suit.

ICD-10 (without diagnostic and therapeutic extensions) was implemented for reporting mortality on January 1, 1999, but ICD-9-CM was still in use for morbidity. Meanwhile, the WHO granted the National Center for Health Statistics (National center for education statistics) of the United States permission to develop a clinical modification of the ICD-10.

The US Centers for Medicare and Medicaid Services (HHS) proposed a novel code sets for reporting treatments and methods on healthcare purchases on August 21, 2008. The ICD-9-CM code configurations would be replaced by ICD-10-CM code sets on October 1, 2013, according to the proposal.

Learn more about the ICD-10 code here

https://brainly.com/question/14819864?referrer=searchResults

#SPJ4

Many agricultural practices involve the emission of greater amounts of methane. The two agricultural practices which result in methane emission is manure management techniques and rice cultivation. The correct options are C and D.

The methane is defined as the simplest hydrocarbon with a chemical formula CH₄. It contains four 'H' atoms and one 'C' atom and it is the simplest alkane.

The main sources of methane emissions from agriculture are enteric fermentation, manure management, rice cultivation and residue burning. The production of methane also occurs animal wastes. Methane emissions occurs from paddy rice when soils are flooded.

Thus the correct options are C and D.

To know more about methane, visit;

https://brainly.com/question/2127750

#SPJ1

Answer:

+1

Explanation:

A nitrogen atom that forms two double bonds and has no lone pairs would have a formal charge of +1.

The formal charge of an atom is calculated by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons. In the case of nitrogen, it has five valence electrons. If it forms two double bonds, then it is sharing four electrons with each bond, for a total of 8 electrons. This means that nitrogen has lost 3 electrons compared to the neutral atom, which gives it a formal charge of +1.

Hydrogen bonds between water molecules must break in order for water to change from solid to liquid to gas and the correct option is option C.

A hydrogen bond is a kind of bonding that is present between an atom of hydrogen and a pair of other atoms having a high electronegativity.

Hydrogen-bonding used to be competitively weaker than ionic bonding or covalent bonding, but it is stronger than van der Waals forces.

When the heat is raised (for instance, as water is boiled), the higher kinetic energy of the water molecules causes the hydrogen bonds to break completely and allows water molecules to escape into the air as gas. We observe this gas as water vapor or steam.

Therefore, hydrogen bonds between water molecules must break in order for water to change from solid to liquid to gas and the correct option is option C.

Learn more about Hydrogen Bonding, here:

https://brainly.com/question/10904296

#SPJ1

In Xylem tracheids and vessels transport minerals vertically.

Water and mineral transportation in plants:

1. Phloem carries nutrients, whereas xylem carries water and minerals.

2. The phloem and xylem are the principal tissues in charge of this flow.

Tracheids:

1. The xylem of vascular plants contains tubular cells called tracheids, which are in charge of carrying root water to the leaves.

2. They exist in all varieties of vascular plants (Pteridophytes, and Gymnosperms).

3. They feature a thin cell wall and cross-sections that are polygonal.

Vessels:

1. Vessels are elongated dead cells with ruptured cell walls that are found in the transpiration stream of flowering plants and allow water to pass through.

2. They are only found in angiosperm plants.

To know more tracheids  about click here .

brainly.com/question/15302827

#SPJ4

Answer:

KMnO4

Explanation:

The chemical formula for potassium permanganate is KMnO4.

꧁༒αηѕωєяє∂ ву gσ∂кєу༒꧂

Answer:

KmN04

Explanation:

.....,...........

The experimental error in this case is 4.46%.

At STP (Standard Temperature and Pressure), 1 mole of gas occupies a volume of 22.4 liters. Therefore, the experimental error in this case can be calculated as follows:

Experimental error = | (experimental value - theoretical value) / theoretical value | x 100%

= | (21.4 L - 22.4 L) / 22.4 L | x 100%

= 4.46%

This means that the experimental volume of 21.4 L is 4.46% lower than the theoretical value of 22.4 L at STP. This could be due to various factors such as instrumental errors, human errors.

Therefore, the experimental error in this case is 4.46%.

Learn more about experimental error here : brainly.com/question/28269575

#SPJ1

At STP one mole of a gas contains 22.41 liters. Here, 28.04 g or 0.60 moles  of nitrogen dioxide will produce 0.60 moles of nitrogen gas and 1.2 moles of oxygen gas. Hence, total volume of gas produce is 41 liters.

STP condition is the condition at which the temperature is 298 K and pressure is 1 atm.

As per the given equation, 2 moles of nitrogen dioxide gives 2 moles of oxygen gas and one mole of nitrogen gas.

molar mass of NO₂ = 46 g/mol

no.of moles in 28.04 g = 28.04/46 = 0.60 moles.

0.60 moles of  NO₂ produce  1.2 moles of O₂ and 0.60 moles of  N₂.

volume of one mole at STP = 22.41 L.

then volume in 0.60 moles = 0.60 × 22.41 = 13.69 L

volume of 1.2 moles of  O₂ = 1.2 × 22.41 = 27.29 L.

Then total volume = 41 L.

Therefore, 28.04 g of NO₂ gas will give a total volume of 41 L of gases.

Find more on STP condition:

https://brainly.com/question/14748919

#SPJ1

The number of moles of zinc chloride produced will also be 1.376 mol when 112 grams of zinc oxide (ZnO) is used.

The balanced chemical equation for the reaction between zinc oxide and hydrochloric acid is:

ZnO + 2HCl → ZnCl₂ + H₂O

From the equation, we can see that 1 mole of zinc oxide reacts with 2 moles of hydrochloric acid to produce 1 mole of zinc chloride and 1 mole of water.

The molar mass of zinc oxide (ZnO) is 81.39 g/mol, so 112 grams of zinc oxide is equal to:

112 g / 81.39 g/mol = 1.376 mol ZnO

According to the balanced chemical equation, 1 mole of zinc oxide produces 1 mole of zinc chloride, so the number of moles of zinc chloride produced will be 1.376 mol.

To know more about moles here

https://brainly.com/question/21323029

#SPJ4

The two additional factors that are significant for the crystal to attain the habit are the time and the necessary elements.

The two additional factors that are the significant for the crystal to attain the habit are the time and the necessary elements.  The factors that is influencing the habit include is as follows :

1)  A combination of the two or the more crystal forms.

2) The trace impurities that is present during the growth.

3) The crystal twinning and the growth of the conditions that is the heat, the pressure, and the space.

5) The specific growth of the tendencies such as the growth striations.

To learn more about crystal here

https://brainly.com/question/28345185

#SPJ4

e. Both a and d are correct.A fluted filter paper is used in gravity filtration because it has a larger surface area than regular filter paper, allowing for faster and more efficient filtration.

The fluted design of the paper creates channels that increase the surface area, allowing for a greater volume of liquid to pass through the paper per unit time. This increases the rate of filtration and ensures that the process is completed more quickly.Option e is the correct answer because both a and d are correct. The larger surface area of the fluted filter paper allows for a faster filtration rate while also providing more area for the sample to be filtered, reducing the risk of sample loss. The use of a fluted filter paper is particularly useful when filtering large volumes of liquid or when the liquid contains a large amount of particulate matter that could clog the filter paper.

Find out more about fluted filter paper

brainly.com/question/14695335

#SPJ4

Sulfur trioxide's chemical name is SO3. That is accurate, indeed. Three oxygen atoms and one sulphur atom make up the chemical compound trioxide, which has the formula SO3. It also goes by the name sulphur

With the chemical formula SO3, sulphur trioxide, sometimes referred to as trioxide, is a highly reactive and corrosive substance. It is a colourless to white crystalline substance that easily transforms into sulfuric acid when exposed to water. Sulfur dioxide and oxygen react in the presence of a catalyst, such as vanadium pentoxide, to form trioxide in an industrial setting. It is employed in the production of sulfuric acid, one of the most significant industrial compounds having several uses across numerous industries. Trioxide is used in a variety of specialised processes, including the creation of synthetic textiles and pigments. Nonetheless, trioxide has to be handled carefully and with the right safety precautions

Learn more about trioxide,here:

https://brainly.com/question/10388500

#SPJ4

You should look within the moon's core if we were interested in discovering iron & sulfur there.

Sulfuric acid, which would be utilized in numerous industries, is frequently made from sulfur. Particularly, lead-acid batteries and fertilizers are made with sulfuric acid. Inorganic compounds, explosives, cement, & glass are all made with sulfur as well.

High concentrations of the metal and its poisonous volatile compounds in the environment are chiefly responsible for sulfur poisoning. By producing bronchitis, bronchoconstriction, as well as increased pulmonary resistance, sulfur dioxide (SO(2)), a common air pollutant, may have a negative impact on both animal and human health.

To know more about sulfur visit:

https://brainly.com/question/13469437

#SPJ1

According to the ideal gas equation and mole concept, there is 0.721 grams of HF present in the sample.

The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.

Substitution in above equation gives n=2×4.50/8.314×300=0.036 which is mass= 0.036×20=0.721 g.

Thus, there is 0.721 grams of HF present in the sample.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ1

Acetone, sometimes referred to as propanone, has a molar mass of around 58.08 g/mol.In stoichiometric calculations, the molar mass of a material is also used to convert between mass and moles of a substance.

Molar mass, measured in grammes per mole (g/mol), is the mass of one mole of a material. It is a key idea in chemistry because it makes it possible to connect a substance's mass to the quantity of particles in a sample. The atomic masses of all the atoms in a molecule are added together to determine the molecule's dimensional mass. This value is helpful for a wide range of tasks, like figuring out how much of a material is needed for a chemical reaction or taking accurate measurements in analytical chemistry. In stoichiometric calculations, the molar mass of a material is also used to

Learn more about Molar mass,here:

https://brainly.com/question/12127540

#SPJ4

Incomplete and complete metamorphoses are similar in that they both start as an egg and the infant insects that go through these cycles look different from the adult. Options 2 and 3.

In both types of metamorphoses, the insect starts as an egg and hatches into a larva or nymph. The larva or nymph of both types of metamorphoses looks different from the adult, and they both go through multiple developmental stages before reaching adulthood.

However, incomplete and complete metamorphoses differ in several ways:

More on complete and incomplete metamorphosis can be found here: https://brainly.com/question/29061320

#SPJ1

The closest 33.6 L is the volume held by 9.031023 molecules of N2 gas at STP.

Option D is the appropriate response to the query. 33.6 L.

We'll start by figuring out how many molecules of N2 gas there are in 9.031023 moles of N2 gas. This is attainable as follows:

According to Avogadro's theory,

1 mole of N2 is equal to 6.021023 molecules.

Therefore,

9.031023 molecules equals

1.5 mole of N2 = 9.03 x 1023 molecules.

As a result, 1.5 moles of N2 contain 9.031023 molecules.

Next, we will calculate the volume that 1.5 moles of N2 at stp occupy. Below is an example to help:

at normal pressure and temperature (STP),

1 mole of N2 equals 22.4 L

Therefore,

N2 in 1.5 moles is 1.5 22.4.

1.5 moles of N2 equal 33.6 L.

As a result, we may say that 33.6 L is the volume that 9.031023 molecules of N2 gas at STP occupy.

Option D. 33.6 L provides the appropriate response to the query.

Learn more about molecules  here:

https://brainly.com/question/19922822

#SPJ4

The volume occupied by 9×1023 molecules of N2 gas at STP (Standard Temperature and Pressure) is closest to .500 L.

STP is defined as 0°C (273.15 K) and a pressure of 1 atm (101.325 kPa). At STP, 1 mole of any gas occupies a volume of 22.4 L. Therefore, since there are 6.022×1023 molecules in 1 mole, 9×1023 molecules will occupy a volume of (9/6.022)×22.4 L or .500 L.  In comparison, the volume of 1.50 L is too large. This is because 1.50 L is the volume occupied by 1 mole of any gas at STP. Since there are only 9×1023 molecules of N2 gas, the volume occupied would be much less. Similarly, 33.6 L is also too large, because this is the volume occupied by 5 moles of any gas at STP. As 9×1023 molecules of N2 gas is much less than 5 moles, the volume occupied would be much lower.

To learn more about molecules

brainly.com/question/19922822

#SPJ4

Intermolecular interactions in [tex]CH_3Cl[/tex] (methyl chloride) include dipole-dipole forces and London dispersion forces. Dipole-dipole forces are the strongest intermolecular interactions in [tex]CH_3Cl[/tex].

The electronegative nature of the chlorine atom makes it more electronegative than the carbon and hydrogen atoms, making methyl chloride a polar molecule with a net dipole moment. The partial positive and negative charges of the chlorine atom and the carbon atom combine to form a dipole, which may interact with other polar molecules and cause dipole-dipole interactions. London dispersion forces also have an impact on intermolecular interactions in [tex]CH_3Cl[/tex]. These forces are caused by the temporary dipoles that can occur from the molecule's transient variations in electron density. These transient dipoles can communicate with one another and with permanent dipoles in the system.

learn more about Dipole-dipole forces here:

brainly.com/question/14195217

#SPJ4

SCBA (Self-Contained Breathing Apparatus) can help protect from smoke inhalation, which can be caused by inhaling heated gases.

When a fire occurs, the heat of the flames can cause the release of toxic gases and particles, including carbon monoxide, hydrogen cyanide, and soot, which can cause respiratory problems and even death if inhaled in high concentrations.

SCBA provides a supply of clean air to firefighters and other emergency responders, allowing them to breathe safely in hazardous environments. It is an essential tool for firefighters and other rescue workers who must enter burning buildings or other dangerous situations to perform their duties.

To know more about the SCBA, here

brainly.com/question/30268256

#SPJ4

Because of the undissociated benzoic acid's role in its antibacterial activity, the two chemicals are being thought of as a unit. Sodium benzoate is a form of benzoic acid that is mildly soluble in water.

What role does sodium play in the body?

The main function of the body's sodium levels is to regulate and control blood volume at all times. Blood volume and the fluid content around cells are both influenced by the full sum of sodium present in the body.

What kind of material is sodium?

Sodium. Alkali metal class (Group 1 [Was / is]) of the 2 of the periodic element sodium (Na). The element sodium has a very delicate silvery-white. Sodium makes up 2.8 percent of the Earth's crust and is the most prevalent alkali metal and sixth most plentiful element on the planet. In nature, it is abundant in compounds

To know more about Sodium visit:

https://brainly.com/question/29327783

#SPJ4

According to solubility rules, water insoluble  compound should not dissolve in water.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.

Learn more about solubility,here:

https://brainly.com/question/22185953

#SPJ1

1.424×10²⁴ oxygen atoms in 52.06 g of carbon dioxide. Option C is correct.

To determine the number of oxygen atoms in 52.06 g of carbon dioxide, we first need to calculate the number of moles of carbon dioxide using its molar mass.

Molar mass of carbon dioxide (CO₂) will be:

1 atom of carbon = 12.01 g/mol

2 atoms of oxygen = 2 x 16.00 g/mol

Total molar mass = 12.01 + 2 x 16.00 = 44.01 g/mol

Number of moles of CO₂ = Mass of CO₂/Molar mass of CO₂

= 52.06 g / 44.01 g/mol

= 1.183 mol

Each mole of carbon dioxide contains 2 moles of oxygen atoms, so the total number of oxygen atoms present in 52.06 g of carbon dioxide is:

Number of oxygen atoms = Number of moles of CO₂ x 2

= 1.183 mol x 2

= 2.366 mol

Finally, we can use Avogadro's number to convert the number of oxygen atoms from moles to atoms:

Number of oxygen atoms = 2.366 mol x 6.022 × 10²³ atoms/mol

= 1.424 × 10²⁴

Hence, C. 1.424 × 10²⁴ is the correct option.

To know more about oxygen atoms here

https://brainly.com/question/29695801

#SPJ4

The molar mass of sucrose is approximately 342.30 g/mol.

The chemical formula for sucrose, also known as table sugar, is [tex]C_{12}H_{22}O_{11}[/tex].

Atomic masses of each element,

Carbon (C): 12.01 g/mol

Hydrogen (H): 1.01 g/mol

Oxygen (O): 16.00 g/mol

Number of atoms of each element,

12 atoms of carbon (C)

22 atoms of hydrogen (H)

11 atoms of oxygen (O)

Multiply the atomic mass of each element by the number of atoms of that element,

(12 x 12.01 g/mol) + (22 x 1.01 g/mol) + (11 x 16.00 g/mol) = 342.30 g/mol

To know more about the molar mass, here

brainly.com/question/27907091

#SPJ4

Answer:

B. ∆H<0

Explanation:

The change in enthalpy (∆H) for a reaction is a measure of the amount of heat that is absorbed or released during the reaction. A positive ∆H indicates that the reaction is endothermic, meaning that heat is absorbed during the reaction. A negative ∆H indicates that the reaction is exothermic, meaning that heat is released during the reaction. A ∆H of zero indicates that the reaction is thermally neutral, meaning that there is no heat transfer during the reaction.

In the given reaction, C2H6 (l) → C2H6 (s), the substance changes from a liquid to a solid, which typically involves a decrease in entropy (or disorder) of the system. This means that the reaction is exothermic, because the decrease in entropy is usually accompanied by a release of heat. Therefore, we would expect the ∆H for this reaction to be negative, which means that B. ∆H<0 is likely to be true for this reaction.

The pure water is considered as the neutral substance as the positive and negative ions balance each other out. The correct option is D)

The H₃O⁺ is called the hydronium ion, and it will makes the acidic in nature. The OH⁻ ion  is called as the hydroxyl ion and it will makes the basic in nature. In the water, there is thein  balance between the hydroniums and the hydroxyls so they will cancel out each others' charges. Therefore the Pure water is neither the acidic in nature or the basic.

Thus, the pure water is the neutral in nature and the value on the pH scale is 7.

To learn more about water here

https://brainly.com/question/1216922

#SPJ4

When the negative end of one water molecule is drawn toward the positive end of another water molecule, a hydrogen bond is created between the two water molecules.

Amazingly, water can cling to both other substances and to itself. The cohesion characteristic of water is the ability of water molecules to attract other water molecules, making water a "sticky" liquid.

The disparity in charge between hydrogen ions that are slightly positive and other hydrogen ions that are slightly negative results in hydrogen bonds, which are electrostatic forces that attract. Hydrogen bonds develop between nearby hydrogen and oxygen atoms of adjacent water molecules in the case of water. A connection called a hydrogen bond is produced by the attraction between individual water molecules.

To know more about hydrogen:

https://brainly.com/question/29765115

#SPJ4

Answer:

Below

Explanation:

Find the number of moles of Zn...each mole is Avagadro's Number of atoms (6.022 x 10^23 )

From periodic table Zn = 65.38 g/mole

50 gm / 65.38 gm/mole ) = .765 mole

.765 mole  *   6.022 x 10^23 = 4.61 x 10 ^23  atoms

The density of the CHCl₃ vapor can be determined using ideal gas equation. At a pressure of 1.09 atm and temperature of 307.9 K, the density of the vapor is 5.10 g/L.

Ideal gas equation relating the temperature, pressure, volume and number of moles of a gas is written as follows:

PV = nRT.

n = W/M

then P = W/M VRT

Where W/V = density D

then ,

PM = DRT.

given

P = 1.09 atm

Molar mass of M of   CHCl₃ = 119.5 g/mol

T = 307.9 K

R = 0.082 L atm/K mol.

Then Density D = PM/RT

D =  (1.09 atm × 119.5 g/mol)/(0.082 L atm/K mol ×307.9 K)

   = 5.1 g/L.

Therefore, the density of CHCl₃  vapor at the given conditions is 5.1 g/L.

Find more on ideal gas equation:

https://brainly.com/question/28837405

#SPJ9