_____ fatty acids consist entirely of carbon-carbon single bonds.

22.85 milliliters of 0.512 M sodium hydroxide will neutralize 25.0 milliliters of 0.234 M sulfuric acid.

Manufacturers may use sodium hydroxide to produce soaps, rayon, paper, products that explode, dyes, and petroleum products. Other tasks that may use sodium hydroxide include processing cotton fabric, metal cleaning and processing, oxide coating, electroplating, and electrolytic extraction.

Sodium hydroxide is overall considered safe for general use — but only in small amounts, at lower concentrations. At higher concentrations, sodium hydroxide is unsafe. It can cause chemical burns, as noted above, along with hives and holes in your skin. It's also very harmful if you eat it or inhale its fumes.

To know more about sodium hydroxide visit :

https://brainly.com/question/29327783

#SPJ1

Answer: Fingerprints are not conclusive evidence on their own.

Explanation:

The thief could have worn gloves and those fingerprints could belong to the owners. If the fingerprints don't match those of the owners', you would still need more evidence to prove that those belong to the killer, such as their whereabouts at the time the vase was stolen, motive, etc. Fingerprints are not conclusive evidence on their own.

Sublimation is the term used for the phase change in which a solid goes directly to the gas state.

Generally, sublimation is defined as the process in which a solid usually transforms into a gas phase without first melting in order to form a liquid phase.

Sublimation is generally defined as the conversion of a substance from the solid to the gaseous state without becoming liquid. Let's consider an example, is the vaporization of frozen carbon dioxide (dry ice) at ordinary atmospheric pressure and temperature. The phenomenon is the result of vapor pressure and temperature relationships.

Hence, sublimation is the term used for the phase change in which a solid goes directly to the gas state.

Learn more about sublimation from the link given below.

https://brainly.com/question/29304516

#SPJ4

Answer:

Explanation:

The boiling point of 100% ethanol, or pure ethanol, at standard atmospheric pressure (1 atm or 760 mmHg) is approximately 78.37 degrees Celsius or 173.13 degrees Fahrenheit. This is slightly lower than the boiling point of water, which is 100 degrees Celsius or 212 degrees Fahrenheit at standard atmospheric pressure. However, the boiling point of ethanol can vary slightly depending on the pressure and the purity of the sample.

The number tab on the Format Cells dialog box will enable her to display the total percentage symbol in the spreadsheet.

A spreadsheet is a computer program that can capture, display and manipulate data arranged in rows and columns. One of the most used tools for personal computers is spreadsheets. In general, a spreadsheet is made to store numerical data and short text strings.

To change the formatting of cell numbers in Excel without changing the actual number, use the format cells function. We can modify the number, alignment, font style, border style, fill options, and protection with the aid of the format cells.

A spreadsheet is a tool for storing, modifying, and analyzing data. A spreadsheet's rows and columns of data can be searched, sorted, calculated from, and utilized to create a variety of graphs and charts.

To know more about the spreadsheet visit;

https://brainly.com/question/30458965

#SPJ1

The correct order of decreasing boiling point is: paraffin, C₂₅H₅₂ > hexadecane, C₁₆H₃₄ > 2,2,4-trimethylpentane, C₈H₁₈ ≈ octane, C₈H₁₈ > propane, C₃H₈

The boiling point of a hydrocarbon is primarily determined by its molecular weight and the strength of its intermolecular forces. Generally, hydrocarbons with higher molecular weights and stronger intermolecular forces have higher boiling points.

Therefore, we can rank these hydrocarbons in decreasing boiling point order based on their molecular weight. paraffin, C₂₅H₅₂, hexadecane, C₁₆H₃₄, 2,2,4-trimethylpentane, C₈H₁₈, octane C₈H₁₈, propane, C₃H₈.

Hydrocarbons are the organic compounds that contain only carbon and hydrogen atoms. Hydrocarbons have various industrial applications, such as fuel for internal combustion engines, heating, and electricity generation.

To know more about hydrocarbon here

https://brainly.com/question/12433190

#SPJ4

Rutherford was the first to propose modifications of mendeleev’s periodic table - False

Ernest Rutherford is well-known for his pioneering work in nuclear physics and radioactivity, however he made no changes to Dmitri Mendeleev's periodic table. Rutherford's contributions to chemistry, on the other hand, were mostly experimental in nature, focusing on the study of atomic structure and the behaviour of electrons in atoms.

Mendeleev, on the other hand, is most known for developing the first widely accepted periodic table of elements, which he published in 1869. Mendeleev's periodic chart was based on element properties and atomic weights, and he used it to anticipate the qualities of unknown elements. Despite the fact that Mendeleev's periodic table has been updated and enlarged throughout time, he is usually credited with its inception and development.

For such more question on periodic table:

https://brainly.com/question/15987580

#SPJ4

The periodic table with masses is very useful as the atomic mass is the average number of protons and neutrons in atoms of a chemical elements, which allows for the natural abundances of the element's isotopes.

Generally, atomic mass of an element is defined as the number of times an atom of that element which is heavier than an atom of carbon taken as 12. Basically, one atomic mass unit is equal to one-twelfth of the mass of an atom of carbon 12 isotope.

In the modern periodic table atomic number is present at the upper left, or number of protons. And in the middle the letter is the symbol used for the element (e.g., H). And below is the relative atomic mass, as calculated for the isotopes found naturally on Earth. Finally at the very bottom is the name of the element (e.g., hydrogen).

Learn more about periodic table from the link given below.

https://brainly.com/question/11155928

#SPJ4

According to the Brnsted-Lowry acid-base theory, HPO4 is the conjugate base of H2PO4 and is thus.

When atoms' ionic bonds are generated or ruptured, chemical events take place. The chemicals that initiate a chemical change are known as reaction mixture, while the regard to the structure as a result of the reaction as known as products.

An action made in response to anything is called a reaction. Your parents' reaction when you tell them you want to move out will show you how upset they are about it. The nature of a reaction is frequently physical. The behavior of a chemical when mixed with another material is referred to as a chemical reaction.

To know more about Reaction visit:

https://brainly.com/question/28984750

#SPJ1

6.0×10⁵m is the wavelength of hello light emitted by sodium lamp if the frequency of the radiation is 5x10⁴.

A periodic wave's wavelength is its spatial period, or the length over which its form repeats. It is a property of the both traveling waves as well as standing waves in addition to different spatial wave patterns. It refers to the distance between two successive corresponding locations of the same phase just on wave, such as two nearby crests, troughs, and zero crossings.

The spatial frequency is the reciprocal of wavelength. The Greek letter lambda is frequently used to represent wavelength. The term wavelength also was occasionally used to refer to modulated waves, their sinusoidal envelopes, or waves created by the interaction of several sinusoids.

ν=c/λ

5x10⁴=3×10⁸/λ

λ =3×10⁸/ 5x10⁴

  =6.0×10⁵m

Therefore, 6.0×10⁵m is the wavelength.

To know more about wavelength, here:

https://brainly.com/question/12377285

#SPJ9

The predicted mass of the solution will fall short of the actual mass of the solution if the student spilled part of the solutions prior to taking the mass measurement.

After we have the masses of the solute and solvent, we may add them to determine the mass of both the solution. Masses are always additive. Hence, we may determine the solution's density by knowing its mass and volume.

Mass or moles are used to describe the solute's concentration. A solution's mass percent is computed by dividing the grams of component per grams of solutions by 100 to arrive at the percentage. The mass of each element in a mole of the compound as well as its molar mass are both solved by using the Mass Percent formula.

To know more about mass of the solution visit:

https://brainly.com/question/15963243

#SPJ4

Matter is classified as a substance or a mixture of substances.

Pure substances and mixtures are the two subgroups of matter. Elements and compounds are formed through the further division of pure substances.

Physically coupled structures known as mixtures can be disassembled into their component parts. One particular sort of atom or molecule makes up a chemical compound.

b.) When balancing a chemical equation, it is usually best to begin with the most complicated molecule

Making ensuring that each element has the same number of atoms on both sides of the equation is the definition of balancing a chemical equation. This is significant because the number of atoms in each element must remain constant throughout a chemical reaction because the law of conservation of mass states that matter cannot be produced or destroyed. A chemical equation must have the same amount of atoms of each element in both the reactants (substances that are combined) and the products (substances that are formed) in order to be balanced. In order to balance the equation, coefficients—numbers placed in front of chemistry formulas—are typically added to the reactants and products.

To know more about chemical equation:

https://brainly.com/question/30087623

#SPJ4

Correct Question

When balancing a chemical equation, it is usually best to begin with the _______________.

a. simplest molecule

b. most complicated molecule

c. products

d. reactants

Answer:

Radium-226 decays by alpha particle radiation to an inert gas, radon-222, which also decays by alpha particle radiation.

Explanation:

The mathematical relationship that can be used to answer the question is the equation for calculating heat gained or lost by a material is Q = m * Cp * ΔT. Q is the amount of heat, m is the mass of the material, Cp is the material's heat capacity, and ΔT is the temperature difference.

The equation as follows:

  Q = m * Cp * ΔT

tells us that the amount of heat (Q) gained or lost by a material is equal to the mass of the material (m) multiplied by its specific heat capacity (Cp) and the change in temperature (ΔT).

In this case, we can use this equation to calculate the amount of heat lost by the aluminum alloy blade and the amount of heat gained by the water during the quenching process. Since energy is conserved, the amount of heat lost by the blade must be equal to the amount of heat gained by the water. Therefore, we can set the two equations equal to each other and solve for the mass of water needed to cool the blade:

    m * Cp * ΔT (blade) = m * Cp * ΔT (water)

273 * 900 * (300 - 50) = m * 4,180 * (50 - 22)

         273 * 900 * 250 = m * 4,180 * 28

                                 m = 524.8 kg

Therefore, 524.8 kg of water would be needed to cool the blade from 300 Celsius to 50 Celsius.

Learn more about heat lost or gained at https://brainly.com/question/4002926

#SPJ11

The ratio of the resultant kinetic energies is given as 3 / 2

A ratio is a comparison of two or more quantities or values, typically expressed in the form of a fraction. It represents how many times one value contains or is contained within another value. For example, if we have two quantities, A and B, the ratio of A to B can be expressed as A/B or as a fraction like A:B.

We have the formula as k-lithium / k-helium

where k-lithium = 3q

k-helium = 2q

such that we would have

3q / 2q

= 3/2

The ratio of their resultant kinetic energies, klithium/khelium is 3 / 2

Read more on ratio here:https://brainly.com/question/2328454

#SPJ1

Rounding this to one decimal place gives 299.5 cal/g ≈ 0.3 cal/g, which is likely why 0.3 was given as the answer.

What is Energy?

Energy is a property of objects or systems that can be transferred to other objects or systems, or converted into different forms. It is a scalar physical quantity that can be defined as the ability to do work or produce heat. Energy exists in many forms, such as mechanical, thermal, electrical, chemical, nuclear, and electromagnetic, and can be transformed from one form to another. The SI unit of energy is the joule (J), but other units such as the calorie (cal) or the electronvolt (eV) are also commonly used in different contexts.

To convert the energy from joules per gram to calories per gram, we can use the conversion factor 1 calorie = 4.184 joules.

Thus, to find the energy of the snack in Calories/gram, we can divide the energy in joules/gram by the conversion factor:

1,254 J/g ÷ 4.184 J/cal = 299.5 cal/g

Rounding this to one decimal place gives 299.5 cal/g ≈ 0.3 cal/g, which is likely why 0.3 was given as the answer.

Learn more about Energy from given link

https://brainly.com/question/13881533

#SPJ1

The given statement is " colligative properties depend only on solute concentration; the identity of the solute is not important" is true as it will depend on the ratio of the number of the particles of the solute and the solvent in the solution,

The Colligative properties of the solutions are the properties that will depend upon the concentration of the solute molecules or the ions, but it will not upon the identity of solute. The Colligative properties are such as the vapor pressure lowering, the boiling point elevation, the freezing point depression, and the osmotic pressure.

The one of the properties of the solution is the colligative property if it will depends only on the ratio of the number of the particles of the solute and the solvent in the solution.

To learn more about colligative properties here

https://brainly.com/question/10323760

#SPJ4

The Calvin-Benson cycle or the light independent process both take place in the stroma of the chloroplast. Carbohydrates are created from carbon dioxide through a sequence of chemical processes.

The energetic electrons from the light-dependent reactions supply the energy to convert carbon dioxide molecules into carbohydrates in the light-independent reactions, also known as the Calvin cycle. Because of the cyclical nature of the process, the light-independent reactions are occasionally referred to as the Calvin cycle.

The products of the light-dependent reactions are necessary for the light-independent reactions to work even though they don't involve light as a reactant and can thus occur day or night. The creation of new carbohydrate molecules is fueled by the energy carrier molecules ATP and NADPH, which are light-independent molecules. The energy carrier molecules then go back to the light-dependent processes to get more energised electrons once the energy has been delivered. Moreover, light activates a number of the enzymes involved in the light-independent processes.

To know more about light-dependent  and light-independent reactions, visit: https://brainly.com/question/11240542

#SPJ4

The identity of the base used should be NaOH.

The scientist has likely added 0.02g of NaOH to 83 ml of water and obtained a pH of 12. NaOH is a strong monoprotic base with a pKa of 13.9, meaning it will completely dissociate in water and produce a pH of 12 when 0.02g is added to 83ml of water. NaOH is also the most commonly used base in a lab setting.  Therefore, it is safe to assume that the base in question is NaOH. When NaOH is added to water, it will dissociate into its ions i.e into Na+ and OH-. The hydroxide ions produced are responsible for the high pH value. The presence of Na+ ions does not have a significant effect on the pH as it is a weak acid. NaOH is a strong base because it completely dissociates in water, producing enough hydroxide ions to increase the pH to 12.

To know more about Bases:

brainly.com/question/29775103

#SPJ4

The acetic anhydride ion pair's ideal buffer action is represented by point V on the curve.

In order to avoid pH variations that can impair the biochemical action of these molecules, acetate buffers are utilized in biosynthetic pathways of catalysts and other biochemical compounds of cells.

The inhibitory effect of the acetate buffer mixture is brought on by sodium and acetic acid's interaction with the protoplasm. Whether the color solution is comprised up of borate and phosphate buffer combination at pH 7.85, the inhibitory impact of acetic acid or acetic buffer mixture is evident.

To know more about acetic acid visit :

https://brainly.com/question/15202177

#SPJ1

The first law of thermodynamics states that the total energy in the universe is constant. This means that the total amount of energy in the universe is always the same, and it cannot be created or destroyed.

Energy can be converted from one form to another and transferred between objects, but the total amount of energy remains the same. For example, if two objects are interacting and one object gains energy, the other object must lose the same amount of energy. This is because energy can be neither created nor destroyed, and so the sum of the energy from both objects must remain the same. Mathematically, this can be expressed as: Energy before interaction = Energy after interaction. This law is often used in calculations to determine the amount of energy that an object has gained or lost in a given situation. The equation for calculating the change in energy (ΔE) is:  ΔE = Efinal - Einitial

To learn more about thermodynamics click here https://brainly.com/question/30207871

#SPJ4

Answer:

an iron nail

Explanation:

iron metal can be corroded in a basic medium,

so iron nail can be corroded by a base

Answer: A leather saddle

Explanation:

Hydrogen and helium have only one electron shell. The first shell has only one s orbital and no p orbital.Therefore, it has only two electrons. So, these elements are most stable when they have two electrons.

The octet rule states that an atom loses or gains an electron in order to achieve a stable electronic configuration. It defines the tendency of an atom to have eight electrons in the outermost shell.

Both helium and hydrogen are stable with two electrons in the valence shell rather than according to the octet rule. They only require the s2 orbital filled since they lack p-orbitals.

Thus, The electronic configuration of hydrogen is 1S¹ and He is 1s².

To learn more about octet rule, follow the link;

https://brainly.com/question/865531

#SPJ1

The point of this problem was to show how the conversion of a reaction can be affected by changes in the molar feed rate of one of the reactants.

Reactants are the substances that take part in a chemical reaction. They are the substances that enter into the reaction and are changed into the products of the reaction. Reactants are the starting materials that are used to form the products. Reactants can be elements, compounds, or mixtures of substances. Reactants must interact with each other in order for a chemical reaction to occur. Reactants are consumed during the reaction, and the products are what is left over after the reaction has taken place. Reactants are also known as substrates in biochemistry.
The conversion of A would be 40%.

To learn more about reactants
https://brainly.com/question/29470602
#SPJ1

Answer: B. Na

Explanation:

The element with 11 protons is sodium (Na), which has an atomic number of 11, indicating the number of protons in the nucleus of an atom of sodium. The atomic number uniquely identifies each element, so any element with 11 protons in its nucleus is sodium.

In addition, the atom in question has 11 electrons, which are equal in number to the protons, as atoms are electrically neutral. Furthermore, the atom has 12 neutrons, which is the total number of nucleons (protons and neutrons) in the nucleus. The atomic mass of sodium is approximately 23, which means that the most common isotope of sodium has 12 neutrons. Therefore, the atom in question has one more neutron than the most common isotope of sodium.

In summary, the atom described has 11 protons, 11 electrons, and 12 neutrons, which are the characteristics of a sodium atom with an atomic mass of approximately 23.

ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.

Polar covalent compounds are electrical conductors. Polar compounds comprise chemical compounds held together through polar covalent bonds.

A polar compound is a chemical species that has two or even more atoms that are linked together by polar covalent bonds that share electrons irregularly. ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.

Therefore,  ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds.

To know more about polar covalent compound, here:

https://brainly.com/question/30420584

#SPJ1

Due to his table-style representation of all known elements, Russian chemist Dmitri Mendeleev gained prominence in 1869. Every substance has a set of fundamental building blocks.

What components are described?

An element is a basic item that really is difficult to break down into smaller pieces. In chemistry and physics, an element is considered a component if non-nuclear reactions cannot destroy it. In computers and mathematics, an element is a discrete part of a larger structure or collection.

What types of elements are there?

Metals, quasi, and metalloid are the three types of elements. On the far left of the periodic chart are metals like salt, calcium, caesium, etc. The quasi, including such charcoal, chloride, and air, are usually referred as the elements on the correct side.

To know more about elements visit:

https://brainly.com/question/14347616

#SPJ4

In water, when CH3COCH3 dissolves, there is just one particle present in the solution.

Acetone's chemical formula is either CH3COCH3 or C3H6O. With only three molecules of carbon, six hydrogen atoms, but one oxygen atom, it is the most basic ketone. Two methyl groups are joined to the center carbon atom, or the sp2 hybridized carbon atom, in the acetone molecule.

A carboxylate ester having the formula CH3COOCH3, methyl acetate is sometimes referred to as MeOAc, acetic anhydride methyl ester, or methyl ethanoate. It is a combustible liquid with a distinctively calming aroma resembling various glues & nail polish removers.

To know more about CH3COCH3 visit:

https://brainly.com/question/26936825

#SPJ4