Find distance between two object of radius 6 cm and 2 cm

The acceleration of the car is 1 m/s².

As the car is at rest in the beginning,

the initial velocity of the car = 0 m/s

Final velocity after 20 seconds = 20 m/s         (given)

We know that,

Acceleration of an object = Rate of change of the velocity of the object

Now,

change in velocity of the car = final velocity of the car - initial velocity of                      the car

                                                = 20 m/s - 0 m/s

                                                = 20 m/s

And, rate of change of velocity = change in velocity/time taken

                                                    = 20/20 m/s²

                                                    = 1 m/s²

Hence, the acceleration of the car is 1 m/s².

For more on velocity and acceleration,

https://brainly.com/question/1192983

The equation "Force = Mass x Acceleration" represents Newton's second law of motion. This law states that the force acting on an object is directly proportional to its mass and the acceleration it experiences. It can be mathematically expressed as F = ma, where F is the force, m is the mass of the object, and a is the acceleration.

Answer:

the answer is 191.7

Explanation:

i dont know the math for it

To determine the unit vector using the components and magnitude of a vector, hence option A is correct.

We can use the following relationship:

Let's consider a force vector F with components Fx, Fy, and Fz, and a magnitude of |F|. The unit vector u in the direction of F can be expressed as:

u = (Fx/|F|) i + (Fy/|F|) j + (Fz/|F|) k

Here, i, j, and k represent the unit vectors in the x, y, and z directions, respectively.

This relationship ensures that the resulting vector u has a magnitude of 1, representing a unit vector.

To know more about vector :

https://brainly.com/question/24256726

#SPJ1.

To hear the third harmonic of a standing sound wave at a frequency of 340 Hz, the length of the closed air column should be approximately 4.55 meters.

The formula for the length of a closed-closed air column in resonance can be used to calculate the length of the air column necessary to hear the third harmonic of a standing sound wave:

L = (4/n) * v/f

Where L represents the height of the air column, n the harmonic number, v the air speed, and f the desired harmonic frequency.

Given:

25°C (298 K) is the ambient temperature.

The required harmonic's (f) frequency is 340 Hz.

(n) = 3 for the harmonic number

At room temperature, the speed of sound in air can be roughly calculated to be 343 m/s. It must be adjusted for the current air temperature because the speed of sound is temperature-dependent.

Using the equation: v = 331.5 + 0.6 * T, where T is the Celsius value of the air temperature.

If T = 25 °C is used in the formula:

v = 331.5 + 0.6 * 25 v ≈ 331.5 + 15 v ≈ 346.5 m/s

We can now determine how long the air column is:

4.55 metres for L = (4/3) * 346.5 / 340 L.

for more such questions on  harmonic

https://brainly.com/question/27237546

#SPJ8

The net force on particle q₁ is approximately +25.6 N.

The electrostatic forces between particle q1 and the other two particles, q2 and q3, must be taken into account in order to determine the net force on particle q1. Coulomb's Law describes the electrostatic force between two charged particles:

F = k * |q₁ * q₂| / r²

F is the force, k is the electrostatic constant (9 x 109 N m2/C2), q1 and q2 are the charges' magnitudes, and r is the distance separating them.

Let's first determine the force between q1 and q2:

F₁₂ = k * |q₁ * q₂| / r₁₂²

F₁₂ = (9 x 10^9 N m²/C²) * |(-29.6 μC) * (+37.7 μC)| / (0.630 m)²

F₁₂ = (9 x 10^9 N m²/C²) * (29.6 x 10^-6 C) * (37.7 x 10^-6 C) / (0.630 m)²

F₁₂ ≈ -7.45 N

The absence of a positive sign suggests an attractive force between q1 and q2.

Let's next determine the force between q2 and q3:

F₂₃ = k * |q₂ * q₃| / r₂₃²

F₂₃ = (9 x 10^9 N m²/C²) * |(+37.7 μC) * (-10.8 μC)| / (0.315 m)²

F₂₃ = (9 x 10^9 N m²/C²) * (37.7 x 10^-6 C) * (10.8 x 10^-6 C) / (0.315 m)²

F₂₃ ≈ +33.05 N

The presence of a positive sign suggests a repulsive force between q2 and q3.

We must now add all the forces in order to determine the net force on q1:

Net force = F₁₂ + F₂₃

Net force ≈ -7.45 N + 33.05 N

Net force ≈ +25.6 N

The presence of a positive sign implies that the net force is pointing to the right, in the same direction as particle q2.

for more such questions on force

https://brainly.com/question/12785175

#SPJ8

The magnitude of force on the small piston that will balance a 25 kN force on the large piston is approximately 2.126 kN.

To determine the magnitude of force on the small piston that will balance a 25 kN force on the large piston, we can use the principle of Pascal's law, which states that the pressure applied to a fluid in a closed system is transmitted equally in all directions.

According to Pascal's law, the pressure on the small piston will be the same as the pressure on the large piston. The pressure can be calculated using the formula:

Pressure = Force / Area

The area of a piston is given by the formula:

Area = π * (radius)^2

Given that the diameter of the small piston is 4.2 cm, we can calculate its radius as follows:

Radius of small piston = diameter / 2 = 4.2 cm / 2 = 2.1 cm = 0.021 m

The area of the small piston is:

Area of small piston = π * (0.021 m)^2

Given that the diameter of the large piston is 62 cm, we can calculate its radius as follows:

Radius of large piston = diameter / 2 = 62 cm / 2 = 31 cm = 0.31 m

The area of the large piston is:

Area of large piston = π * (0.31 m)^2

According to Pascal's law, the pressure on both pistons is the same:

Pressure on small piston = Pressure on large piston

Therefore, we can set up the following equation:

Force on small piston / Area of small piston = Force on large piston / Area of large piston

Solving for the force on the small piston, we have:

Force on small piston = (Force on large piston * Area of small piston) / Area of large piston

Substituting the given values:

Force on small piston = (25 kN * π * (0.021 m)^2) / (π * (0.31 m)^2)

Calculating this expression, we find:

Force on small piston ≈ 2.126 kN

For more such questions on magnitude of force

https://brainly.com/question/30015989

#SPJ8

Answer:

192.6N

Explanation:

Let's consider the forces acting on the beam:

Weight of the beam (W): It acts vertically downward and has a magnitude of W = mass * gravitational acceleration = 39.4 kg * 9.8 m/s^2.

Force exerted by the link on the beam (F_link): It acts at an angle of 90 degrees with respect to the beam and has two components: the vertical component and the horizontal component.

Tension in the cable (T): It supports the far end of the beam and acts at an angle of 90 degrees with respect to the beam. Since the angle between the beam and the cable is 90 degrees, the tension in the cable only has a vertical component.

Let's break down the forces acting on the beam:

Vertical forces:

W (weight of the beam) - T (vertical component of tension) = 0

T = W

Horizontal forces:

F_link (horizontal component of the force exerted by the link) = ?

To find the magnitude of the horizontal component of the force exerted by the link on the beam (F_link), we need to consider the equilibrium of forces in the horizontal direction.

Since the beam is inclined at an angle of θ = 33.1 degrees with respect to the horizontal, the horizontal equilibrium equation can be written as:

F_link = W * sin(θ)

Let's substitute the given values:

W = 39.4 kg * 9.8 m/s^2

θ = 33.1 degrees

F_link ≈ (39.4 kg * 9.8 m/s^2) * sin(33.1 degrees)

Using a calculator, we find that the magnitude of the horizontal component of the force exerted by the link on the beam (F_link) is approximately 192.6 N.

Explanation:

J is amplitude

I is wavelength

K is trough

L is crest

M is midline

More details are required in order to calculate liquid A's height. Without knowing the volume or mass of the liquid, the density alone is not enough to determine the height. But if we assume that liquid A's density stays constant throughout and we have a known-volume container filled with liquid A, we may apply the following formula:

Height = Volume / Base Area

Assume liquid A has a volume of 100 cm3. To adjust the formula for height, we may do the following:

Height = Volume / Base Area = 100 cm³ / Base Area

If the base area is known, we may use the formula to get the height by substituting the base area. Otherwise, it is impossible to calculate the height of liquid A without more details.

To know more about height :

https://brainly.com/question/29131380

#SPJ1.

Answer: 520 nm; 5.77 × 1014 Hz; 3.82 × 10−19 J

Answer: The volume of the anchor is approx. 29.56 m^3.

               Its mass is approx. 228,511.72

Explanation: Archimedes' Law States that "When a body is submerged in a fluid, it experiences an upward buoyant force that is equal to the weight of the fluid displaced by the body".

Here Buoyant force = 290N i.e. the difference in weight due to fluid displaced.

Buoyant force = D*V*g

D= 1025 kg/m^3 for seawater

g = 9.81 m/s^2

V = 290/1025*9.81

(a) V = 0.02884 m^3

Mass of Anchor = Density of Anchor* V

Mass of Anchor = 7730*0.02884

Mass of Anchor = 222.94 kg

More on Archimedes' Law :

https://brainly.in/textbook-solutions/q-define-stress-strain-1

Answer:

83.13 degree Celsius folks!

Explanation:

Q = msdT

Here is how you do it fella's! First off Let us know abt the above terms shall we?

Where:

Q is the heat energy absorbed by the water,

m is the mass of the water,

s is the specific heat capacity of water,

dt is the change in temperature.

Given:

Q = 3.6 x 10^5 J

m = 2 kg

s= 4,186 J/kg°C (specific heat capacity of water)

Initial temperature, T_initial = 40°C

Rearranging the formula, we have:

dt = Q / (ms)

Substituting the given values:

dt = (3.6 x 10^5 J) / (2 kg * 4,186 J/kg°C)

Calculating:

dt ≈ 43.13°C

To find the final temperature, we add the change in temperature to the initial temperature:

Final temperature = T_initial + dT(above formed temp)

Final temperature = 40°C + 43.13°C

Final temperature = 83.13°C

Therefore, the correct final temperature of the water is approximately 83.13.

The valence shell is the outermost shell of the atom. The electrons present in the outermost shell or valence shell are called valence electrons. The electrons are the negatively charged particle that revolves around the nucleus.

The elements are substances that are made up of one or two atoms. There are 118 periodic tables of elements. The elements are arranged by the atomic number. The first shell in the atom occupied 2 electrons and the second shell occupied 8 electrons. The electronic configuration is 2n².

From the given, Boron has 5 electrons and hence, the valence shell is 3 electrons. Carbon has 6 electrons and hence, the valence electrons are 4. Lithium has 3 electrons and hence, the valence electron is 1. Neon has 10 electrons and hence the valence electron is 8. Argon has a valence electron is 8.

Silicon has a valence electron of 4. Aluminium has a valence electron of 3. Fluorine has a valence electron of 7 and Oxygen has a valence electron is 6. Phosphorous element has a valence electron is 5.

To learn more about Valence electrons:

https://brainly.com/question/31264554

#SPJ1

Hooke's Law can be given as follows sometimes:

The restoring force of a spring is equal to the spring constant multiplied by the displacement from its normal position:

F = -kx

Where, F = Restoring force of a spring (Newtons, N)

k = Spring constant (N/m)

x = Displacement of the spring (m)

The negative sign relates to the direction of the applied force and by convention, the minus or negative sign is present in F = -kx. The restoring force F is directly proportional to the displacement (x), according to Hooke's law. When the spring is compressed, the displacement (x) is negative. It is zero when the spring is at its original length and positive when the spring is extended.

Practically, Hooke's Law is applicable only within a limited frame of reference, and through experimenting, this statement proves to be true. Because materials cannot be compressed beyond a certain size or expanded beyond a certain size without some permanent deformation or change of their original state.

The law only applies under some conditions such as a limited amount of force or deformation. Factually, many materials will noticeably deviate from Hooke's law even before those elastic limits are reached.

To know more about Hooke's law, visit :

https://brainly.com/question/15365772

Lewis's structure is defined as the structure of atoms and their positions within the molecular representation. It is the simplest structure of the valence shell representation of electrons of the molecule.

From the given,

Lewis structure of the carbonate ion has two single bonds to negative oxygen atoms and one short double bond to neutral oxygen. The carbon atom was surrounded by three oxygen atoms.

Lewis structure of ammonium ion, There are four sigma bonds of around the nitrogen atom. Nitrogen is surrounded by hydrogen bonds. The shape of NH₄⁺ is tetrahedral shape.

Lewis structure of boron trifluoride is, BF₃ has one boron atom and three fluoride atoms. The valency of fluorine is 7 and one electron is involved in bond formation with boron, leaving it with three lone pairs to form an octet. The boron atom has three electrons and involves bonding.

Lewis structure of bicarbonate ion, the bicarbonate ion has 24 electrons and 12 electron pairs. Bonding electrons involves 10 electrons and hence it forms 7 lone pairs or 14 electrons. The oxygen atom has 3 lone pairs that forms double-bonded oxygen.

To learn more about Lewis structure:

https://brainly.com/question/29603042

#SPJ1

Violet color in the visible spectrum has the highest frequency. The violet colour has the greatest frequency of all the colours in the visible spectrum.

The range of electromagnetic waves that can be seen by the human eye is known as the visible spectrum, and it contains colours from red to violet. Based on their wavelengths, light waves that travel through a prism or diffract split into various colours.

The shortest wavelength of all the colours that may be seen, violet, correlates to a high frequency. Wavelengths and frequencies gradually change as we go from violet to red. As a result, violet has the greatest frequency of all the colours in the visible spectrum.

To know more about visible spectrum :

https://brainly.com/question/12807557

#SPJ1.

The average speed of the elderly woman walking around the shopping center is 1.80 km/h.

To calculate the average speed of the elderly woman, we can use the formula for velocity, which is equal to the distance traveled divided by the time taken. In this case, the distance traveled is 0.30 km and the time taken is 10 minutes. However, average speed is generally expressed in units of distance per unit of time, so we need to convert minutes to hours.

There are 60 minutes in one hour, so 10 minutes is equal to 10/60 = 1/6 hours.

Now we can calculate the average speed by dividing the distance traveled (0.30 km) by the time taken (1/6 hours):

Average speed = 0.30 km / (1/6 h)

= 0.30 km * (6/1 h)

= 1.80 km/h

Therefore, the average speed of the elderly woman walking around the shopping center is 1.80 km/h.

for more such question on average speed

https://brainly.com/question/4931057

#SPJ8

Potential at C with respect to B is +65 volts (C with respect to ground) - +80 volts (B with respect to ground) is -15 volts with respect to B.

To find the potentials at B, C, and D with respect to the ground:

Potential at B with respect to ground:

Since A is at +100 volts with respect to ground and +20 volts with respect to B, we can deduce that B is 100 - 20 = +80 volts with respect to ground.

Potential at B = +80 volts with respect to ground.

Potential at C with respect to ground:

C is at +15 volts with respect to D, and D is at +50 volts with respect to E. Since E is at ground potential (0 volts), we can calculate the potential at C with respect to ground by adding the potentials:

Potential at C = +50 volts (D with respect to E) + 15 volts (C with respect to D) = +65 volts with respect to ground.

Potential at D with respect to ground:

D is at +50 volts with respect to E, and E is at ground potential (0 volts). Therefore, the potential at D with respect to ground is:

Potential at D = +50 volts (D with respect to E) + 0 volts (E with respect to ground) = +50 volts with respect to ground.

Now, let's calculate the potential at C with respect to B and D:

Potential at C with respect to B:

We know that A is at +20 volts with respect to B. Combining this information with the potential at A (+100 volts with respect to ground), we can determine the potential at B with respect to ground:

Potential at B = +100 volts with respect to ground - +20 volts (A with respect to B) = +80 volts with respect to ground.

Since we already calculated the potential at C with respect to ground as +65 volts, we can find the potential at C with respect to B:

Potential at C with respect to B = +65 volts (C with respect to ground) - +80 volts (B with respect to ground) = -15 volts with respect to B.

Learn more about potential on

https://brainly.com/question/24142403

#SPJ1

The frequency of the guitar string is approximately 2.325 Hz.

To calculate the frequency of a guitar string, we can use the formula for the fundamental frequency of a vibrating string:

f = (1/2L) * sqrt(T/m)

Where:

f is the frequency,

L is the length of the string,

T is the tension in the string, and

m is the mass of the string.

Given:

Length of the string (L) = 0.6 meters

Tension in the string (T) = 0.6 newtons

Mass of the string (m) = 0.01 kilograms

Substituting the values into the formula:

f = (1/2 * 0.6) * sqrt(0.6 / 0.01)

f = 0.3 * sqrt(60)

To simplify the calculation, let's approximate the square root of 60 as 7.75:

f ≈ 0.3 * 7.75

f ≈ 2.325

This means that the string vibrates 2.325 times per second. The frequency of a vibrating string determines the pitch of the sound produced. In this case, the calculated frequency represents the fundamental frequency of the string, which is the lowest pitch that can be produced by the string when played without any harmonics or overtones.

for more such questions on frequency

https://brainly.com/question/254161

#SPJ8

a)  the block is submerged to a depth of approximately 0.0377 meters.

b) the magnitude of the block's acceleration when released fully submerged is approximately 0.444 m/s^2.

(a) To determine the depth to which the block is submerged, we can use Archimedes' principle, which states that the buoyant force acting on an object immersed in a fluid is equal to the weight of the fluid displaced by the object.

The weight of the fluid displaced by the block is equal to the weight of the block itself. The weight of the block can be calculated using its volume and density, where weight = density × volume × acceleration due to gravity (W = ρVg).

Let's assume the height of the block that is submerged in the fluid is h.

The volume of the block can be calculated as V = area × height, where the area is given by the product of the length and width of the block.

The weight of the block is W = ρ_block × V × g, where ρ_block is the density of the block and g is the acceleration due to gravity.

The weight of the fluid displaced is equal to the weight of the block, so we can set up the equation:

W = ρ_fluid × V_submerged × g

where ρ_fluid is the density of the fluid and V_submerged is the volume of the block submerged in the fluid.

Since the volume of the block is equal to the volume submerged, we can substitute V_submerged with A × h, where A is the area of the block.

ρ_block × A × h × g = ρ_fluid × A × h × g

The area and acceleration due to gravity cancel out, and we're left with:

ρ_block × h_block = ρ_fluid × h_submerged

Solving for h_submerged:

h_submerged = (ρ_block / ρ_fluid) × h_block

Plugging in the given values:

ρ_block = 900 kg/m^3

ρ_fluid = 1300 kg/m^3

h_block = 5.5 cm = 0.055 m

h_submerged = (900 / 1300) × 0.055 = 0.0377 m

Therefore, the block is submerged to a depth of approximately 0.0377 meters.

(b) When the block is fully submerged, it experiences an upward buoyant force equal to the weight of the fluid it displaces. When released, the block accelerates upward until the buoyant force matches its weight, resulting in a state of equilibrium.

The magnitude of the acceleration can be determined using Newton's second law, where the net force acting on the block is equal to its mass multiplied by its acceleration (F_net = m × a).

The net force acting on the block is the difference between its weight (mg) and the buoyant force (ρ_fluid × V_submerged × g).

The buoyant force is equal to the weight of the fluid displaced, which is given by the density of the fluid multiplied by the volume of the block submerged.

The mass of the block is equal to its volume multiplied by its density (m = ρ_block × V_block).

The equation for the net force becomes:

F_net = m × a

mg - ρ_fluid × V_submerged × g = ρ_block × V_block × a

The volume of the block is equal to the area of the block multiplied by the height submerged (V_block = A × h_submerged).

Substituting the values and simplifying:

900 × A × h_submerged × g - 1300 × A × h_submerged × g = 900 × A × h_submerged × a

The area of the block (A) and acceleration due to gravity (g) cancel out, and we're left with:

900 - 1300 = 900 × a

Simplifying further:

-400 = 900 × a

Dividing both sides by 900:

a = -400 / 900 = -0.444 m/s^2

The magnitude of the acceleration is 0.444 m/s^2.

Note that the negative sign indicates that the acceleration is directed opposite to the downward force of gravity, which is expected as the block is moving upward towards equilibrium.

for more such questions on submerged

https://brainly.com/question/30028517

#SPJ8

Answer:

To summarize:

(i) Angle of incidence = 54°

(ii) Angle of reflection = 54°

(iii) Angle made by the reflected ray and the surface = 36°

(iv) Angle made by the incident and reflected rays = 54°

Explanation:

(i) To calculate the angle of incidence, we use the fact that the angle of incidence is equal to the angle between the incident ray and the normal to the surface. In this case, the angle of incidence is given as 54°.

(ii) According to the law of reflection, the angle of reflection is equal to the angle of incidence. Therefore, the angle of reflection is also 54°.

(iii) The angle made by the reflected ray and the surface is the complement of the angle of reflection. Since the angle of reflection is 54°, the angle made by the reflected ray and the surface is 90° - 54° = 36°.

(iv) The angle made by the incident and reflected rays is the angle between the incident ray and the reflected ray. Since the angle of incidence is 54° and the angle of reflection is also 54°, the angle made by the incident and reflected rays is 54°.

Answer:

Breaking an atom refers to a process called nuclear fission, which involves splitting the nucleus of an atom into smaller nuclei. This is typically accomplished by bombarding the atom with a neutron, which causes the nucleus to become unstable and split apart, releasing a large amount of energy in the process. This energy is what is harnessed in nuclear power plants to generate electricity. However, it should be noted that nuclear fission can also have potentially harmful effects, such as the release of radioactive material and the potential for nuclear accidents.

Total distance travelled is 35m and displacement is 25m.

Distance: Distance is a scalar that expresses the total distance traveled by an object. It's a measure of physical distance that's covered and always good. The distance has nothing to do with the direction, only the magnitude of the change is determined.

Displacement: Displacement is the vector of change in the position of an object. It takes into account the magnitude and direction of change in position from the starting point to the ending point. Perception can be positive, negative or zero depending on the direction of movement.

Total distance = 15m + 20m

Total distance = 35m

Displacement = [tex]\sqrt{15^{2} +20^{2} \\}[/tex]         (as both are perpendicular to each other)

Displacement = 25m

Therefore, Total distance is 35m and displacement is 25m.

To learn more about Displacement:

https://brainly.com/question/11934397?referrer=searchResults

One notable athlete who has been associated with the use of performance-enhancing drugs (PEDs) is the American professional cyclist Lance Armstrong.

Armstrong gained worldwide recognition for his unprecedented seven consecutive victories in the Tour de France from 1999 to 2005. However, his remarkable achievements were tarnished when it was revealed that he had engaged in systematic doping throughout his career.

In 2012, after years of denial, Armstrong finally admitted to using banned substances, including erythropoietin (EPO), testosterone, corticosteroids, and blood transfusions, to enhance his performance. These substances boosted his endurance and oxygen-carrying capacity, providing him with an unfair advantage over his competitors. Armstrong's confession came after substantial evidence, including testimonies from teammates and extensive investigations, exposed his involvement in one of the most elaborate and sophisticated doping schemes in sports history.

Following his admission, Armstrong was stripped of his Tour de France titles and received a lifetime ban from professional cycling. The revelations surrounding his drug use had a profound impact on the sport, shaking its credibility and raising concerns about the prevalence of doping in cycling.

Armstrong's story serves as a cautionary tale, highlighting the ethical and moral dilemmas associated with doping in sports. His case underscores the importance of maintaining the integrity of athletic competition, the significance of stringent anti-doping measures, and the need for education and awareness regarding the risks and consequences of performance-enhancing substances.

For similar questions on PEDs:

https://brainly.com/question/16919004

#SPJ8

The resultant combination of the two wheels and the shaft will rotate at approximately half the initial angular speed, ω₀/2.

When the wheel with rotational inertia I₁, initially rotating with angular speed ω₀, is dropped onto the vertical shaft with negligible rotational inertia, the resulting combination of the two wheels and the shaft will rotate at a lower angular speed. The new angular speed can be calculated using the principle of conservation of angular momentum.

According to the conservation of angular momentum, the initial angular momentum of the system must be equal to the final angular momentum. The initial angular momentum is given by the product of the initial rotational inertia (I₁) and the initial angular speed (ω₀). Since the rotational inertia of the shaft is negligible, we can ignore its contribution.

When the wheel is dropped onto the shaft, the total rotational inertia of the system becomes the sum of the rotational inertia of the wheel (I₁) and the rotational inertia of the shaft (I₂), which is negligible. Therefore, the final angular momentum of the system is given by the product of the total rotational inertia and the final angular speed (ω).

Since the initial and final angular momenta must be equal, we have:

I₁ × ω₀ = (I₁ + I₂) × ω

As I₂ is negligible compared to I₁, we can approximate the equation as:

I₁ × ω₀ ≈ I₁ × ω

Simplifying the equation, we find:

ω ≈ ω₀/2

Therefore, the resultant combination of the two wheels and the shaft will rotate at approximately half the initial angular speed, ω₀/2.

Know more about angular speed here:

https://brainly.com/question/25279049

#SPJ8