For this discussion, you get to explore one specific element and share the historical context and modern day application of that element with the class. Your initial post should address the following questions about the element you chose:

1. How did the element you chose get its name and who discovered it?
2. What are the properties this element possesses that places it where it is in the periodic table?
3. Write a sufficient summary of the element in common language that could be understood by the general public.
4. Describe the implications for society, benefits, drawbacks, practicality, and reactivity of the element.
5. What are some applications and hazards of this element and how is it commonly encountered?
6. Discuss your personal thoughts regarding the element.
7. Questions to your classmates that invite discussion and further the dialogue.
8. An embedded picture that is relevant to the discussion.
9. Give a citation of an external peer reviewed resource that you would like to

The mass of [tex]IF_5[/tex] that would be in a 15.88 L sample at 378 K and 0.935 will be 106.51 grams.

The problem can be solved by first using the ideal gas equation to know the number of moles of the gas that is present.

PV = nRT

P = 0.935, V = 15.88 L, T = 378 K, R = 0.082

Making n the subject of the formula:

n = PV/RT

  = (0.935x15.88)/(0.082x378)

   = 0.48 moles of the gas

Recall that, mass = mole x molar mass

The molar mass of [tex]IF_5[/tex] is 221.89 g/mol

Mass of 0.48 moles [tex]IF_5[/tex] = 0.48 x 221.89

                                       = 106.51 grams

In other words, the mass of [tex]IF_5[/tex] that would be in a 15.88 L sample at 378 K and 0.935 is 106.51 grams.

More on ideal gas problems can be found here: https://brainly.com/question/13438949

#SPJ1

If the volume of the balloon was 4.21L when the temperature was 25.0°C, 8.42L will be the volume of the balloon be when the temperature is 50.0°C. if Mass and pressure is constant.

Hence, in the above case it is shown that temperature is rising twice of its original value so, the volume of that given mass of gas in the balloon will also increase by twice.

Solution:

4.21L=25.0°C

4.21L×2=50.0°C

8.42L=50.0°C

8.42L will be the volume of the balloon be when the temperature is 50.0°C.

To know more about volume visit

https://brainly.com/question/12050285

#SPJ1

Answer:

The last one.

Explanation:

The other ones add more force or give the same but the last one reduces it.

The number of oxygen atoms present in 2.0L of oxygen gas at same temperature and pressure is 5.1 × 10²² atoms.

The number of atoms of a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number (6.02 × 10²³).

no of atoms = no of moles × 6.02 × 10²³

According to this question, the density of oxygen gas at a certain temperature and pressure is 1.345 g cm-³. If 2.0 L of oxygen gas is given, the mass of the oxygen gas can be calculated as follows:

mass = 1.345 × 2 = 2.69grams

moles = 2.69g ÷ 32g/mol = 0.084moles

No of atoms = 0.084 mol × 6.02 × 10²³

no of atoms = 5.1 × 10²² atoms

Learn more about number of atoms at: https://brainly.com/question/14190064

#SPJ1

Troposphere atmosphere layer does this process happen The acidity of rainwater comes from the natural presence of three substances (CO2, NO, and SO2) found in the troposphere

To learn more about troposphere refers to:

brainly.com/question/30126863

#SPJ1

1.4 x 1023 molecules are present in 2.3 moles of oxygen.

We know that if we multiply the 2.3 moles of oxygen with Avogadro's number which is 6.023 x 1023 then this will give us the number of molecules which is present in the 2.3 moles of oxygen and which is 13.85 x 1023.

Mole is a standard scientific unit for measuring large quantities of very small entities like atoms, molecules, or other specific particles. The mole entitles an extremely large number of units about 6.02214076 × 1023.

So we can conclude that by multiplying Avogadro's number with the 2.3 moles of oxygen then it will give us 1.4 x 1023 molecules.

Learn more about Molecules here: https://brainly.com/question/26044300

#SPJ1

Answer:

BOD produced per 1000kg of milk processed = (1400mg/I x 240m3) / 150000kg = 0.192mg/I

Population equivalent = (0.192mg/I x 75g) / 5 = 0.576g

Explanation:

The mass of copper nitrate produced in the reaction 3.65g of copper and 5.16g of nitric acid​ is 3.84g.

Nitric acid reacts with copper

4 HNO3(l) + Cu(s) ==> Cu(NO3)2(s and aq) + 2 NO2(g) + 2 H2O(l)

Deep blue colour characterises the copper nitrate salt that develops. Nitrogen dioxide is the gas that is created when strong nitric acid and copper interact. This maroon mist is nitrogen dioxide.

Copper :

=> mass copper nitrate

=> 3.65g Cu x 1mol of Cu/63.546 g Cu x 1 mol copper nitrate / 1 mol cu x 187.56 g/mol copper nitrate

=> 10.77g

HNO3 (Nitric acid):

=> Mass copper nitrate =3.65 g HNO3 X 1 mol HNO3/63.546 g HNO3 x 1mol of copper nitrate /4 mol HNO3 x 187.56 g/mol copper nitrate.

=> 3.84g.

Learn more about copper nitrate here:

brainly.com/question/29402119

#SPJ1

Answer:

0.355 moldm^-3

Explanation:

The mass of the compound is calculated by freezing point depression formula which is ΔTf=Kf×W₂×1000/M₂×W₁ which is equal to 3125 g.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.

Freezing point depression is calculated by the formula, ΔTf=Kf×W₂×1000/M₂×W₁ .Therefore,W₁=5.12×75×1000/0.48×256=3125 g.

Thus, mass of compound is 3125 g.

Learn more about compound,here:

https://brainly.com/question/13516179

#SPJ1

The VSEPR drawing for the compounds in the question are shown in the images attached.

We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.

Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.

We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.

The molecule would have a definite shape that is based on the number of electron shells in the molecule.

Learn more about molecule:https://brainly.com/question/19922822

#SPJ1

Functional group can be interconverted into each their by the means of suitable reagent. Functional group are responsible for the chemical and physical properties of a compound. Therefore in the below given ways compound can bee classified.

A group of atoms forming a component of a molecule that accounts for a particular function or chemical behavior is called a functional group. There are so many functional group in organic chemistry.

first compound--------  secondary (2°)

second compound--------------  secondary (2°)

third compound-------------------- tertiary (3°)

fourth compound ----------------primary (1°)

fifth compound---------------primary (1°)

Therefore in the above given ways compound can bee classified.

To know more about functional group, here:

https://brainly.com/question/14618322

#SPJ1

Answer:

The ion-electron method involves breaking the reactants into their component ions and transferring electrons between the ions to balance the charge and the atoms. In a basic solution, the S²⁰⁸² ion will gain two electrons to form SO₂. The I¹⁻ ion will lose one electron to form I³⁻. The balanced redox equation using the ion-electron method is:

S²⁰⁸² + 2e⁻ + 2OH⁻ → SO₂ + H₂O

I¹⁻ + e⁻ → I³⁻

The overall balanced equation is:

2S²⁰⁸² + 2OH⁻ + I¹⁻ → 2I³⁻ + SO₂ + H₂O

the answer is that it is a

Polyatomic ions are ions made up of more than one atom.

What are Atoms?

Atoms are the smallest particles of matter that make up all objects. They are composed of protons, neutrons, and electrons. Protons and neutrons make up the nucleus of the atom, while electrons orbit around the nucleus. Atoms are the basic units of matter and are the building blocks of all living and nonliving things.

Polyatomic ions are ions that consist of two or more atoms covalently bonded together and carrying a net electric charge. Examples of polyatomic ions include nitrate (NO3−), sulfate (SO42−), phosphate (PO43−), and carbonate (CO32−).

To know more about Atoms,

https://brainly.com/question/16666188

#SPJ1

Answer: A balanced chemical reaction is A balanced chemical equation where the number of atoms of each type in the response is the same on both reactants and product sides.

Explanation: Burning, and cooking are 2 examples.

They are distinct Similarity: Compared to crustal rocks, mantle rocks have higher concentrations of magnesium and iron. The deep mantle's rocks are under extreme pressure and heat.

Earth's interior is made up primarily of the mantle, which is solid. Between the thin crust at the surface of the planet and its dense, extremely hot core is the mantle. A staggering 84% of the volume of the Earth is made up of the mantle, which is around 2,900 kilometers 1,802 miles thick.

The thickest layer on Earth measures just under 3,000 kilometers 1,865 miles. The beginning is only 18.6 miles 30 kilometers below the surface. It is thick, heated, and semi-solid like caramel candy, mostly made of iron, magnesium, and silicon. It circulates, much like the layer beneath it.

To know more about mantle visit:

https://brainly.com/question/11096614

#SPJ1

When the conductivity is at a minimum, the true thing about the amount of Ba(OH)₂ is that the amount of the two reactants are the same when conductivity is low.

The ability of an aqueous solution to carry an electric current is measured by its conductivity. Ionic strength is measured by conductivity monitors. In automated chromatography systems, conductivity is the main input control parameter used to enable the generation of salt gradients or to control buffer dilution or in-line buffer preparation.

Conductivity monitors can be used to automate and monitor cleaning and equilibration procedures. It's important to remember that temperature affects measurements of conductivity and pH.

When conductivity is low, the amounts of the two reactants are equal. Between the reactants, there are no excesses. The aqueous solution cannot dissolve the precipitate BaSO₄. Since there are no ions, the conductivity is at its lowest.

Learn more about conductivity on:

https://brainly.com/question/1851658

#SPJ1

Complete question

The Ba(OH)₂ dissociates as Ba+2 + 2 OH-. H₂SO₄ dissociates as 2 H+ + SO₄-2. When the conductivity is at a minimum, what must be true about the amount of Ba(OH)₂ compared to H₂SO₄

The first reaction is a first order reaction and the unit of rate constant is s⁻¹. The second one is also a first order reaction with the same unit. Third one is a third order reaction with the unit for k as L² mol⁻² s⁻¹.

Rate of a reaction is the rate of decrease in concentration of the reactants or increase in concentration of the products. The rate is directly proportional to the concentration of reactants and the rate law is written as:

rate = k [reactants]

where, the proportionality constant k is called the rate constant.

The order of a reaction is the sum of powers of the molar concentration of reactants. Thus, each reaction vary in order and the order of reaction also depends on the steps in the reaction.

The general formula of the unit of rate constant is L⁽ⁿ⁻¹⁾ mol⁽¹⁻ⁿ⁾ s⁻¹. Hence,  first reaction is a first order reaction and the unit of rate constant is s⁻¹. The second one is also a first order reaction with the same unit.

Third one is a third order reaction with the unit for k as L² mol⁻² s⁻¹. The fourth one is a second order reaction. Thus, unit of rate constant is L mol⁻¹ s⁻¹.

Find more on rate constant:

https://brainly.com/question/20305922

#SPJ1

Answer:

Correct option is C)

Kinetic Energy at 20

o

C=293K

=3/2K

B

​

T=3/2K

B

​

(293)J=K.E

1

​

kE

2

​

=2K.E

1

​

2

2

3

​

K

^

B

​

(293)=

2

3

​

K

^

B

​

T

T=586K

=313

o

C

Mass percent of a compound=(mass of element in molecule/total mass of compound)×100  (a) 63.64%

We use the concept of mass percentage composition to explain the concentration of an element in a compound or a component in a combination. This word refers to the overall percent by mass of each element present in a compound.

In chemistry, a compound's percent composition is calculated by dividing its total amount of each elements by the compound's total amount, multiplied by 100. The following formula determines an element's percentage composition:

(gE/gT) = %CE 100

Here, %CE stands for the element's composition in percent.

How to calculate the percentage of each element by mass makes up each compound?

To get the mass percent of an element in a compound, multiply the result by 100 after dividing the mass of the element in 1 mole of the compound by the compound's molar mass.

Calculating total mass of HNO3

= 1 x 1 + 14 x 1 + 16 x 3

= 1 + 14 + 48

= 63

Calculating the mass percentage of Nitrogen in HNO3

= 1/63 x 100

= 1.586 %

To know more about Mass percent composition of nitrogen refer to:

brainly.com/question/10395703

#SPJ1

Explanation:

This hot material rises to an area of lower pressure through the process of convection. Areas of lower pressure always have a lower melting point than areas of high pressure. This reduction in overlying pressure, or decompression, enables the mantle rock to melt and form magma.

Answer:

Explanation:

In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).

The structure of an amino acid in basic solution (pH = 11) can be represented as follows:

The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.

The amino group is positively charged due to the loss of a proton (H+).

The carboxyl group is negatively charged due to the gain of a proton (H+).

Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.

Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):

H |

N-C-COOH

|

R

Regenerate response

Answer:

The number of moles of water in 100 g of vinegar is 0.47 moles.

Explanation:

In solid carbon dioxide (dry ice), the particles are held together by strong covalent bonds, so they do not move around much.

What is the carbon dioxide?

Carbon dioxide (CO2) is an odorless, colorless gas created through natural processes such as respiration, combustion and the breakdown of organic materials. As a greenhouse gas, it is a major component of the Earth’s atmosphere and plays a critical role in regulating the global climate. Carbon dioxide is made up of one carbon atom and two oxygen atoms, and is produced when fossil fuels such as coal and oil are burned. Plants and trees also use carbon dioxide as part of their photosynthesis process. Carbon dioxide is essential for life on Earth, however, too much of it can have a negative impact on our planet. As human activity has increased over the past century, so too has our production of CO2, resulting in higher concentrations of this gas in the atmosphere and contributing to global warming.

To learn more about carbon dioxide

https://brainly.com/question/25385913

#SPJ1

Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.

If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.

A high-fat, high-calorie, and high-cholesterol diet

To know more about  high blood sugar visit:-

https://brainly.com/question/29749982

#SPJ1

Answer:

40.10 atm. is answer i think ....

Answer:

The answer is the last one only.

Explanation:

Light/sun gives energy and growth which makes the plants leaves/plant grow bigger.

Explanation:

Without the sun, plants wouldn't get the food that's needed to grow, reproduce and survive. plants need sunlight, water and carbon dioxide to live.