galena's specific gravity is 7.5, that of quartz 2.65, and that of liquid mercury 13.6. given equal-sized samples (volumes) of galena and quartz, which will feel heavier? choose one: a. they will feel about the same. b. quartz c. galena

When the pressure in the lung is greater than atmospheric pressure, expiration occurs.

Generally, expiration is defined as the process of expelling out carbon dioxide-rich air. Basically, during expiration, the ribs moved downwards and also inwards and the diaphragm relaxes and moves upwards. This inward and outward movement of diaphragm leads to a decrease in the volume of the lungs.

Expiration is basically a passive process because no muscular contraction occurs in order to cause air to flow out of the lungs. Relaxation of the diaphragm, and the intercostal muscles will definitely increase the pressure of the thoracic cavity (and inside of the lungs) over the atmospheric pressure, causing air to leave the lungs.

Learn more about atmospheric pressure from the link given below.

https://brainly.com/question/28310375

#SPJ4

Option (d) exothermic. An exothermic process is a chemical or physical process that releases energy in the form of heat.

This energy is typically released as a result of the formation of stronger bonds between atoms or molecules than existed in the reactants. For example, freezing, where a liquid turns into a solid, releases heat as the molecules slow down and form stronger bonds. Condensation, where a gas turns into a liquid, also releases heat as the molecules lose energy and form stronger intermolecular bonds. Exothermic processes are the opposite of endothermic processes, which absorb heat from the surroundings and store it as potential energy in the reactants.

Learn more about exothermic here: brainly.com/question/28143384

#SPJ4

Inner transition metals are also known as lanthanides and actinides.

The lanthanides are the 14 elements with atomic numbers 58 through 71, while the actinides are the 14 elements with atomic numbers 90 through 103. These elements are called inner transition metals because they occupy the two rows at the bottom of the periodic table and have electrons in their f orbitals.

Lanthanides elements are highly reactive and have similar chemical and physical properties. They are used in a variety of applications, including lighting, magnets, and catalytic converters.

Actinides elements are radioactive and can undergo nuclear reactions, making them useful in nuclear power, nuclear medicine, and nuclear weapons.

To know more about lanthanides here

https://brainly.com/question/30155237

#SPJ4

There are two methods which can measure most accurate density, the methods are water displacement method and the Archimedes principle method.

Generally, the water displacement method is defined as a system of measurements which is used to obtain the volume of an object that have an irregular shape. Basically, these objects are often referred to as irregularly shaped solids.

You can easily determine the density of an object from the Archimedes principle in the following way that "if you measure the weight of the object when immersed in a fluid Wi and the weight outside in air Wo the difference in these forces always the buoyant force".

Learn more about density from the link given below.

https://brainly.com/question/29775886

#SPJ4

The given statement "colligative properties only depend on solute concentration; the identity of the solute is not important" is true. Because colligative properties arise from the effect of solute particles on the physical behavior of the solvent, rather than any specific chemical interactions between the solute and solvent.

Colligative properties such as freezing point depression, boiling point elevation, osmotic pressure, and vapor pressure lowering depend only on the concentration of solute particles in a solution, regardless of the identity of the solute.

Colligative properties have many practical applications, such as in determining the molecular weight of a solute, the osmotic pressure in biological systems, and in the antifreeze properties of solutions used in automobiles.

To know more about colligative properties here

https://brainly.com/question/29971068

#SPJ4

So, 12.5 mL of 10 M HCl would be needed to neutralize the 0.125 moles of NaOH in the 1 mL of 5% sodium hydroxide solution.

The mole concept is a fundamental concept in chemistry that is used to quantify the amount of a substance in a sample. A mole is defined as the amount of substance that contains the same number of entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12. This number of entities is known as Avogadro's number. Using the mole concept, it is possible to convert between the mass of a substance and the number of moles of the substance, and vice versa. For example, the molar mass of a substance is the mass of one mole of the substance, and it can be used to convert between the mass and the number of moles of the substance. If the molar mass of a substance is known, then the number of moles of the substance can be calculated from its mass using the equation: moles = mass / molar mass. Conversely, if the number of moles of a substance is known, then its mass can be calculated from the number of moles using the equation: mass = moles x molar mass. The mole concept is used extensively in stoichiometry, which is the study of the quantitative relationships between reactants and products in chemical reactions. It is also used to calculate concentrations of solutions, to determine the limiting reagent in a reaction, and to determine the theoretical yield of a reaction.

Here,

The first question is asking for the number of moles of 4-i-butylphenol in the mixture to be separated in Experiment 1. This would depend on the specific composition of the mixture and the amount used in the experiment. Without more information, it is not possible to calculate the number of moles of 4-i-butylphenol in the mixture.

For the second question, we can calculate the number of moles of sodium hydroxide in 1 mL of 5% sodium hydroxide solution as follows:

The concentration of 5% sodium hydroxide solution is 5 g of NaOH in 100 mL of solution. We can convert the grams of NaOH to moles:

5 g NaOH x (1 mol NaOH/40.00 g NaOH) = 0.125 mol NaOH

So, 1 mL of 5% sodium hydroxide solution contains 0.125 moles of NaOH.

For the third question, we need to know the amount of sodium hydroxide solution to be neutralized and the concentration of the concentrated hydrochloric acid solution.

Assuming we want to neutralize all 0.125 moles of NaOH in the 1 mL of 5% sodium hydroxide solution, we can use the balanced chemical equation for the neutralization reaction between NaOH and HCl:

NaOH + HCl → NaCl + H2O

The equation shows that 1 mole of NaOH reacts with 1 mole of HCl to form 1 mole of NaCl and 1 mole of water.

If the concentration of the concentrated hydrochloric acid solution is known, we can use it to calculate the volume needed to neutralize the 0.125 moles of NaOH. For example, if the concentration of the concentrated hydrochloric acid solution is 10 M (10 mol/L), we can use the following calculation:

0.125 mol NaOH x (1 mol HCl/1 mol NaOH) x (1 L/10 mol HCl) x (1000 mL/1 L) = 12.5 mL

To know more about mole concept,

https://brainly.com/question/22540912

#SPJ1

Answer:

Below

Explanation:

2 H2  + O2  ====>      H20      you have 4 H's on L...need 4 on right so:

2H2  + O2 =====>  2 H2 O      Now H's are 'balanced' and a check of the O's  shows they are balanced too (two O's on each side)

Since Mercury is so small, a Mercury's magnetic field shouldn't exist because it no longer has a molten core.

Mercury's magnetic field is created, much like Earth's magnetic field, by the action of molten iron deep beneath the planet's core.

According to a research from the Planetary Research Center published in the journal Science, Comet's magnetic field is significantly older than previously thought, dating back at least 3.7 to 3.9 billions of years.

To know more about Mercury's magnetic field visit:

https://brainly.com/question/29604103

#SPJ4

Explanation:

Preparing a saturated solution of sodium chloride at 25 ° C : Bring the water to 25 ° C and add keep on adding sodium chloride to it and stir it until no more sodium chloride can dissolve in it. On cooling the water to 10 ° C , some of the sodium chlorides will be separated from the water by crystallization.

Answer: An amino acid is a type of organic compound that serves as the building blocks of proteins. It contains an amino group (-NH2) and a carboxyl group (-COOH), both attached to the same carbon atom, along with a side chain group that is specific to each amino acid. There are 20 different types of amino acids that can be found in nature, and they are essential for many biological processes, including the synthesis of proteins, enzymes, hormones, and neurotransmitters.

Explanation:

Answer: 159.994 grams

Explanation: search

Answer:160 grams

Explanation:

5 moles × 32.0 g/mol = 160 grams is the mass (m) when there are 5 moles of O2

HClO₄  - strong acid; HI -strong acid; NaOH - strong base; HNO₂ -  weak acid; CH₃COOH (acetic acid) - weak acid; (CH₃)₂NH-   weak base; HNO₃-strong acid; Ca(OH)₂-strong base; HCl -  strong acid; KOH -  strong base; HCN -weak acid; HF-   weak acid; CH₃NH₂- weak base; HBr-strong acid; LiOH- strong base; Ba(OH)₂ -  strong base; H₂SO₄ - strong acid.

Differentiate between strong and weak base.

A weak base is one that does not fully dissociate when dissolved in water, leaving a large portion of the base's molecules undissociated and only a small portion of hydroxide ions and the relevant basic radical in the resulting aqueous solution. A strong base is a molecular substance that is sufficiently basic to deprotonate—remove a proton (H+) from—a molecule of even a very weak acid, like water.

An acid that is fully ionized in an aqueous solution is referred to as a strong acid. In water, hydrogen chloride (HCl) fully ionizes into hydrogen and chloride ions. An acid that ionizes relatively little in an aqueous solution is said to be weak acid. Vinegar contains acetic acid, which is a very weak acid.

To learn more about strong acid use :

https://brainly.com/question/24586675

#SPJ1

The molality of a solution containing 3.0 moles of NaCl and 100.0 moles of water is given as 1.7 m.

Mathematically,

Molality = Moles of solute / Mass of solvent in kg

We know that,

Solute is NaCl

Moles of NaCl = 3.0 moles

Solvent is water

Moles of water = 100.0 moles

Molar mass of water (H₂O) = 18.01528 g/mol

Mass of H₂O = 18.01528 g/mol × 100 mol = 18.01528 g = 1.801528 kg

Substitute the values,

Molality = 3 moles/1.801528 kg = 1.665 m = 1.7 m

Hence, the molality of a solution containing 3.0 moles of nacl and 100.0 moles of water 1.7 m.

Learn more about molality from the link given below.

https://brainly.com/question/26921570

#SPJ4

In chemistry, a buffer is a solution that typically contains an acid and a base, or a salt, and which helps to keep the concentration of hydrogen ions constant. Atoms or molecules that have acquired or lost one or more electrons are known as ions.

When acidic or basic substances are added, a substance is said to be a buffer if it can endure the pH change. It can neutralize minor amounts of acid or base, essentially maintaining the solution's pH. This is important for processes and/or reactions that require specific and stable pH values. How much acid or base can be mitigated before pH changes, as well as how much pH will change, depends on the pH range and capacity of buffer solutions.

What components comprise a buffer?

To successfully maintain a pH range, a weak conjugate acid-base pair, which can be either a weak acid and its conjugate base or a weak base and its conjugate acid, must be present. The pH that is wanted when making the buffer will simply determine which should be used. The following, for instance, could serve as barriers when mixed together in a solution:

Sodium acetate is a salt that contains acetic acid, a weak organic acid with the formula [tex]CH_{3} COOH[/tex] and its corresponding base, the acetate anion ([tex]CH_{3} COO-[/tex]) ([tex]CH_{3}COONa[/tex])

Pyridinium chloride is a compound that contains pyridinium cation ([tex]C_{5}H_{5}NH+[/tex]), the conjugate acid of pyridine (weak base with formula [tex]C_{5}H_{5}N[/tex]).

Ammonia (weak base with formula [tex]NH_{3}[/tex]) and a salt having the ammonium cation, which is the conjugate acid of ammonia, are examples of such compounds ([tex]NH_{4}OH[/tex])

To know more about buffers:

https://brainly.com/question/3435382

#SPJ4

Expressions for the rates of appearance of I₂ and NO₂ is: Rate of appearance of I₂ = (Delta [I₂] / Delta t) = k[INO], Rate of appearance of NO = (Delta [NO] / Delta t) = 2k[INO].

Balanced chemical equation for the decomposition of INO is:

INO (g) → I₂ (g) + 2NO (g)

The rate of disappearance of INO is given as:

(Delta [INO] / Delta t) = - k[INO]

where [INO] is the concentration of INO, t is time, and k is the rate constant.

To find the expressions for the rates of appearance of I₂ and NO, we need to use the stoichiometric coefficients from the balanced equation. The coefficient of I₂ is 1, and the coefficient of NO is 2. Therefore, the expressions for the rates of appearance of I₂ and NO₂ are:

Rate of appearance of I₂ = (Delta [I₂] / Delta t) = k[INO]

Rate of appearance of NO = (Delta [NO] / Delta t) = 2k[INO]

Note that these expressions are based on the assumption that the reaction is first-order with respect to INO. If the reaction is not first-order with respect to INO, the expressions for the rates of appearance of I₂ and NO will be different.

To know more about rates of appearance here

https://brainly.com/question/3146631

#SPJ4

The experimental rate law is; Rate = k[O2] [NO]^2

Thus the reaction is first order with respect to oxygen and second order with respect to nitrogen monoxide

The rate constant, represented by the symbol k, is a proportionality constant that relates the rate of a chemical reaction to the concentration of reactants. The rate constant is specific to a particular reaction and is determined experimentally.

The rate law of a chemical reaction expresses the relationship between the rate of the reaction and the concentrations of the reactants.

We know that;

2.56 * 10^-1/8.52 * 10^-2 = (0.09/0.03)^n

3 = 3^n

n = 1

Again;

7.67 * 10^-1/8.52 * 10^-2 = 0.06/0.02

9 = 3^n

3^2 = 3^n

n = 2

The rate law is;

Rate = k[O2] [NO]^2

Learn more about rate law:https://brainly.com/question/30379408

#SPJ1

Matter generally exists in three different physical states, namely solid, liquid and gaseous state. The plasma is defined as the fourth state of matter.

The matter is composed of very minute particles which cannot be seen with our eyes. It can be classified into different categories on the basis of the state in which they exist. These are called states of matter.

In solids, particles are tightly packed and they have a fixed volume and shape. In liquids, particles are less tightly packed as compared to solids and they take the shape of the vessel in which they are kept.

In gases, particles can move freely and they do not have a fixed volume nor a shape. A plasma is an electrically charged gas and they also do not have a fixed volume nor a shape.

Thus, solid, liquid, gas and plasma are states of matter.

To know more about states of matter, visit;

https://brainly.com/question/1134312

#SPJ1

1-bromobutane will undergoes dehydrohalogenation by an elimination reaction when it heated in the presence of base, the product formed is 1 - butene.

The elimination reaction is the type of the organic reaction in which the two substituents will removed from the molecule in either the one step or the two step mechanism. The one step mechanism is called as the E2 reaction, and the two step mechanism is called as the E1 reaction.

This reaction is the E2 reaction, therefore, the mechanism of reaction is the one step, and when 1-bromobutane undergoes dehydrohalogenation the base will be subtract the hydrogen from the Carbon 2, it eliminates the bromide and forms the double bond, the product formed is  the 1-butene.

To learn more  about elimination reaction here

https://brainly.com/question/29695970

#SPJ4

The main idea of the quantum mechanical model is that it describes particles, such as electrons, as having both wave-like and particle-like properties.

The quantum mechanical model is a modern and more accurate description of the behavior of atoms and subatomic particles than the classical mechanical model.

According to the quantum mechanical model, electrons in atoms are described by mathematical functions called wave functions, or orbitals, which give the probability of finding the electron at any given location in space.

The quantum mechanical model also explains the electronic structure of atoms, including the number and distribution of electrons in their orbitals, and how electrons are arranged in energy levels and sublevels.

To know more about quantum mechanical model here

https://brainly.com/question/29597957

#SPJ4

Therefore, the new pressure of the air sample will be 145 kPa when the temperature is raised to 62 °C and the volume expands to 7.00 L.

Pressure is a fundamental concept in physics and is involved in a wide range of phenomena, from the behavior of fluids to the operation of mechanical devices. For example, when a force is applied to a gas, the gas molecules collide with the walls of the container and exert a pressure on the walls. This pressure is proportional to the number of gas molecules, the temperature of the gas, and the volume of the container. Pressure is also important in many practical applications, such as in the design of buildings, bridges, and other structures that must be able to withstand external forces. It is also critical in many industrial processes, such as the compression of gases, the operation of hydraulic systems, and the production of materials under high pressure.

Here,

We can use the combined gas law to determine the new pressure of the air sample. The combined gas law relates the pressure, volume, and temperature of a gas when the amount of gas and the units of measurement are constant. The equation is:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature, and P₂, V₂, and T₂ are the final pressure, volume, and temperature, respectively.

We can plug in the given values to find the initial conditions:

P₁ = 97 kPa

V₁ = 7.00 L

T₁ = -50.0 °C + 273.15 = 223.15 K

Next, we can find the final temperature:

T₂ = 62 °C + 273.15 = 335.15 K

We are given that the final volume is the same as the initial volume, so V₂ = V₁ = 7.00 L. We can plug in these values to solve for the final pressure:

(P₁V₁)/T₁ = (P₂V₂)/T₂

(97 kPa)(7.00 L)/(223.15 K) = (P₂)(7.00 L)/(335.15 K)

Simplifying the equation, we get:

P₂ = (97 kPa)(335.15 K)/(223.15 K) = 145 kPa

To know more about pressure,

https://brainly.com/question/18431008

#SPJ1

The electron configuration of the fluorine is :

1s² 2s² 2p⁵

The atomic number of the fluorine is 9. The fluorine is the non metallic and it is pale yellow - green element with the pungent odor. The electronic configuration of the fluorine is as follows :

The electron configuration of the fluorine = 1s² 2s² 2p⁵

The noble gas electronic configuration of fluorine = [He] 2s² 2p⁵.

The fluorine contains the 9 protons, 10 neutrons and the 9 electrons. The fluorine belongs to the group 17 and the it  belongs to the period 2 in the periodic table and it is belongs to the halogen group.

To learn more about fluorine here

https://brainly.com/question/19538177

#SPJ4

The energy required to produce carbon-oxygen bonds is more than the energy released when carbon-carbon and oxygen-oxygen connections are broken, making step 2 endothermic.

Each of the double bonds between the carbon and oxygen atoms has a bond energy of 187 kcal. The carbon atom shares two pairs of electrons with each oxygen atom (or about 93 kcal for each shared pair of electrons). More energy is required to break a connection with a higher bond energy.

Energy is released once the link is broken. Light, heat, or kinetic energy can all be used to disrupt chemical bonds.

To know more about endothermic visit :-

https://brainly.com/question/23184814

#SPJ4

The general term for hidden heat absorbed or released when a substance undergoes a change in state is latent heat.

Generally, the specific latent heat of a substance is defined as the quantity of heat energy required to change the state of a unit mass of a substance. EL= ml where EL is referred as the heat transferred, in joules, m is the mass, in kilograms, and l is the latent heat in joules per kilogram. Basically, the SI unit for specific latent heat is Jkg−1

More precisely latent heat is also defined as the energy that is absorbed or released by a substance during a change in its physical state (phase) that occurs without changing its temperature.

Learn more about latent heat from the link given below.

https://brainly.com/question/28044951

#SPJ4

The process in which gas transforms into a solid is called deposition. The process in which gas transforms directly into solid without passing through the liquid state is called deposition.

This process occurs when a gas loses energy or heat and the particles start to come closer together, forming a solid. Deposition is the opposite of sublimation, which is the process of a solid transforming directly into a gas without going through the liquid phase. Examples of deposition include the formation of frost on a cold surface, the growth of snowflakes in the atmosphere, and the formation of icicles. Deposition is an important process in the water cycle and plays a crucial role in shaping the physical properties of the Earth's surface.

Learn more about deposition here: brainly.com/question/22697743

#SPJ4

To find the number of atoms in 238.4 g (Al), we can convert the mass into number of moles, using molar mass, (found on a standard IUPAC periodic table) and thus, multiply this result by Avogadro's Constant, 6.022×10²³, i.e. the number of 'items' in a mole (atoms, molecules, ions, etc...).

n(Al) = mass present (g) ÷ molar mass of aluminium (g/mol)

n(Al) = m/M = 238.4/26.98 = 8.836 mol (4 sig. fig.)

N(Al) = number of moles × Avogadro's Constant

∴ N(Al) = 8.836 × 6.022×10²³ = 5.321×10²⁴ atoms of aluminium

The reaction of benzaldehyde with acetone and sodium hydroxide produces an organic compound, known as dibenzylideneacetone (DBA).

Dibenzylideneacetone (DBA) is an organic compound with chemical formula C17H14O. It is a yellow crystalline solid that is commonly used in organic chemistry as a ligand or a precursor to various ligands. It has a distinctive structure consisting of two phenyl rings and a carbonyl group conjugated to an alkene, giving rise to a system of alternating double bonds that contribute to its unique properties. It is also known for its use in organic solar cells and as a photosensitizer in polymer chemistry.

The reaction of benzaldehyde with acetone and sodium hydroxide is a type of aldol condensation reaction, which results in the formation of dibenzylideneacetone (DBA). The reaction proceeds through a series of steps, including the formation of an enolate intermediate from the acetone and the deprotonation of the benzaldehyde by the hydroxide ion.

Learn more about benzaldehyde here: brainly.com/question/13263721

#SPJ4

According to the color model we select the green color code may differ. There are many examples of color codes which green is included. Some of them are RGB, HEX, YMCK and HSL.

Green is the color of nature. We can maybe say that green is the primary source of inspiration or it gives relaxation to the eye to watch.

If we name some of the eco friendly colors it includes lime, mint, moss, avocado, and forest green etc.

Along with these well-known hues of green, other options include emerald, army, olive, and Kelly green. Hue can be called as pure pigment.

Brightness, color saturation, shades these are all may directly influence the color codes.

Learn more about color codes:

https://brainly.com/question/22245089

#SPJ4

Complete question: Give examples of the color codes in which green is included.

Specific accommodations and technological advancements needed for a successful moon mission include radiation shielding, advanced life support systems, reliable communication systems, and improved propulsion technology.

Radiation shielding is important for a moon mission because the moon has little to no atmosphere, which means that astronauts are exposed to high levels of radiation from cosmic rays and solar flares. Therefore, effective shielding is needed to protect the crew and equipment from radiation damage.

One example of improved propulsion technology that could benefit a moon mission is the development of electric propulsion systems, which are more efficient and can provide longer periods of thrust than traditional chemical rockets. Electric propulsion can also reduce the amount of fuel needed for a mission, which can lower costs and increase payload capacity.

Learn more about moon here:

https://brainly.com/question/13538936

#SPJ1

The true statements about noncovalent bonding interactions are: Noncovalent interactions can be intramolecular, The strength of a noncovalent interaction depends on the magnitude of the charge, and all noncovalent bond interactions are inherently electrostatic in nature. Option A, C, and D is correct.

Noncovalent bonding interactions refer to the various types of chemical interactions between molecules or within a molecule that do not involve the sharing of electrons in a covalent bond. These interactions are generally weaker than covalent bonds, but they are still essential for many biological and chemical processes.

Option B is false because ionic interactions are stronger than van der Waals interactions in proteins. Van der Waals interactions are the weakest noncovalent interactions.

To know more about noncovalent bonding interactions here

https://brainly.com/question/14484157

#SPJ4

Government regulatory bodies are essential in the protection of our water supply.

Protection is the act of defending oneself, one's property, or another person from physical, emotional, or financial harm. It involves shielding, guarding, and defending oneself or another person from danger or risk. It is an important concept, especially in the context of safety, security, and self-care.

These bodies are responsible for setting standards and regulations that ensure that the water that is used for drinking, cooking, and other activities is safe for human consumption. They also monitor the quality of water and investigate complaints of water contamination. By setting standards for water quality and monitoring for compliance, these organizations help to ensure that our water supply is safe and healthy. Additionally, they can take enforcement action against companies or individuals who break the regulations and pollute our water supply.

To learn more about protection

https://brainly.com/question/30624365

#SPJ1