Therefore, Δ∘ at 298 K for the reaction A + B ⟶ 2C is -685,682 J or -685.682 kJ. To calculate Δ∘ at 298 K for the reaction A + B ⟶ 2C, we can use Hess's Law.
Hess's Law states that if a reaction can be expressed as the sum of two or more reactions, the enthalpy change of the overall reaction is equal to the sum of the enthalpy changes of the individual reactions.
Given reactions:
A + BC ⟶ 2D
2D ⟶ D
We need to find the enthalpy change for the reaction A + B ⟶ 2C. Let's break down the reaction into the given reactions:
A + B ⟶ A + BC (Step 1)
A + BC ⟶ 2D (Step 2)
2D ⟶ 2C (Step 3)
Now we can calculate the enthalpy change for the overall reaction by summing up the enthalpy changes of these individual steps.
Step 1:
Since A appears on both sides of the equation, its enthalpy change will cancel out, so we don't need to consider it in the calculations.
Step 2:
ΔH∘(Step 2) = ΔH∘(A + BC ⟶ 2D) = -685.3 kJ
Step 3:
ΔH∘(Step 3) = ΔH∘(2D ⟶ 2C) = 2 * ΔH∘(D) = 2 * (-191.0 J/K) = -382 J/K = -0.382 kJ
Now, we can sum up the enthalpy changes of all the steps to find the overall enthalpy change:
ΔH∘(A + B ⟶ 2C) = ΔH∘(Step 2) + ΔH∘(Step 3)
= -685.3 kJ + (-0.382 kJ)
= -685.3 kJ - 0.382 kJ
= -685.682 kJ
Since the enthalpy change is given at 298 K, we need to convert the enthalpy change from kJ to J:
ΔH∘(A + B ⟶ 2C) = -685.682 kJ * 1000 J/kJ
= -685,682 J
Learn more about Hess's Law: https://brainly.com/question/31508978
#SPJ11
Some analytes must be derivatized to increase their column retention or detectability. Derivatization means Group of answer choices altering the chemical structure of the analyte to increase detection and specificity. adding fluorescent labels or combining the analyte with chiral reagents or other chemicals to increase detectability. removing dissolved gases in the solvent to produce a clear chromatogram. using multiple detectors to assist in identification.
Derivatization means adding fluorescent labels or combining the analyte with chiral reagents or other chemicals to increase detectability.
Some analytes must be derivatized to increase their column retention or detectability.
Retention time can be referred to as the amount of time a solute spends in the stationary and mobile phases of a column.
Detectability is the ability of an analyte to get detected in the mobile phase of chromatography.
The refractometer, fluorescence detector, and UV detector are the three most popular liquid chromatography detectors. These detectors increase the detectability.
For derivatization, the fluorescence detector are used.
Learn more about derivatization
https://brainly.com/question/17609332
#SPJ4
What is the oxidation number for S in the compound SO3? (Recall that O has an oxidation number of –2.)
0
+2
+4
+6
The oxidation number for S in the compound SO3 is +6 (option D). Details about oxidation number can be found below.
What is oxidation number?Oxidation number of an element is the hypothetical charge of an atom within a molecule.
The oxidation number of elements in a compound adds up to the overall charge of that compound.
According to this question, O has an oxidation number of -2 in SO3, the oxidation number of S can be calculated as follows:
x - 2(3) = 0
x - 6 = 0
x = 6
Therefore, the oxidation number for S in the compound SO3 is +6.
Learn more about oxidation number at: https://brainly.com/question/15167411
#SPJ1
The answer is D: 6+
Worked for me on EDGE 2023
What three letters are always added to the end of nonmetals in naming ionic compounds?
Answer:
-ide
Explanation:
Ionic compounds are made up of two parts: a cation and an anion. The cation is positively charged (less electrons) and the anion is negatively charged (more electrons). When naming these compounds, if the anions are nonmetals, they have their endings dropped in order to add the new ending: -ide.
Examples,
CaCl₂ ----> calcium chloride
BaF₂ -----> barium fluoride
MgO -----> magnesium oxide
Magnesium and calcium have similar chemical properties because their atoms in the ground state have.
Magnesium and calcium have similar chemical properties because they have the same number of electrons in their valence shells.
What does magnesium and calcium have in common?
The valence/outermost shell of magnesium and calcium both has two electrons. An element's chemical characteristics are dictated by how its electrons are arranged in their orbits around the nucleus. The same number of protons and electrons means that an element's chemical behavior is fundamentally determined by its atomic number, which explains why Mg and Ca share the same chemical properties.
On the periodic table, magnesium and calcium are both located in the second vertical column. Magnesium and calcium are alkaline earth metals, just like all Group 2 elements. Both of them are salt-forming soft, silver-colored metals that respond fast to halogen gases like fluorine, chlorine, and bromine.
Learn more about magnesium and calcium here:
https://brainly.com/question/11324493
#SPJ4
Aqueous hydrobromic acid reacts with solid sodium hydroxide to produce aqueous sodium bromide and liquid water . What is the theoretical yield of water formed from the reaction of of hydrobromic acid and of sodium hydroxide
Mass of water produced is equal to 7.2 grams.
The reactants are reacting according to the following equation:
HBr + NaOH = NaBr + H2O
1 mole of HBr requires 1 mole of NaOH to be totally transformed into NaBr and water.
Now, let us calculate the amounts of HBr and NaOH in mols:
m(HBr) = 67.2g
m(NaOH) = 16g
M(HBr) = 80.9g/mol
M(NaOH) = 40g/mol
Following the simple relation
n(moles) = m(grams)/M(g/mol)
n(HBr) = 67.2g/(80.9g/mol)
n(NaOH) = 16g/(40g/mol)
n(H2O) = n(NaOH) = 0.40 mol, which is:
m(H2O) = n(H2O) x M(H2O)
0.40mol∗18g/mol=7.2g
Finally, the mass of water produced is equal to 7.2 grams.
Learn more about Hydrobromic acid here:
https://brainly.com/question/21544156
#SPJ4
Phosphorus reacts with oxygen gas to produce solid diphosphorus pentoxide. What type of reaction is represented
It is a combination reaction.
P + O₂ → P₂O₅
What is a combination reaction?Combination reactions are those in which two or more reactants combine to create a single product.
A synthesis reaction is another name for a combination reaction. The overall form of the reaction is as follows:
X + Y → XY
There can be a combination reaction between two elements, two compounds, or a compound and an element.
Examples:
H₂ + Cl₂ → 2HCl
P + O₂ → P₂O₅
C + O₂ → CO₂
Learn more about combination reactions here:
https://brainly.com/question/17258460
#SPJ4
see the attached photo*** can someone please explain how to do this for me? I really need help on my summer school thank you !
Answer:
See attached image.
Explanation:
See attached image.
Remember to use the units in deciding steps to take. Find the moles needed or delivered by using:
Molarity x Volume = moles [(moles/L)*(L) = moles]
Molarity, M, is dedined as 1 mole/liter. When working with a unit such as 6M, rewite it as 6 moles/liter, and then use unit conversions to guide how to find the solution, so to speak.
How will designing more efficient stoves help conserve fuel?
Answer:
it would do wonders for the health of those using them and, by extracting energy from the fuel more efficiently, would be more environmentally sustainable too.
What two basic geologic processes contributed to the formation of folded mountain ranges like in Glacier National Park?
The two basic geologic processes which contributed to the formation of folded mountain ranges like in Glacier National Park include:
Folding and breaking of sedimentary rocks.Erosion.What is Erosion?This is a geologic process which involve materials in the earth being washed away and transported to other parts by water, wind etc.
In the case of Glacier National Park, ice erodes the mountain thereby resulting in the folding of the sedimentary rocks.
Read more about Glacial erosion here https://brainly.com/question/8880387
#SPJ1
Chlorine gas is applied at a rate of 40 pounds per day to a well operating at 1250 gpm. What is the chlorine dosage for this well, expressed in parts per million
2.7 is the chlorine dosage for this well, expressed in parts per million.
Unlike municipal water, well water does not go through a water treatment facility. That implies that it could be contaminated with poisons like lead, coliform bacteria, volatile chemical compounds, and others. chlorination in well water is done to fulfill the role that chlorine plays in municipal sources' water disinfection processes.
It is advised to start with a chlorine concentration of 50 to 100 parts per million (ppm).
Bacterial pollutants are eliminated from well water, well casings, holding tanks, and the entire water delivery system via shock chlorination. To shock chlorinate, a well driller with a license is trained.
Algae have been linked to green water, and they may thrive in both surface water and groundwater wells even in the absence of sunshine. Algae can color the water in both the pre-and post-decomposition stages with a variety of hues, including green, brown, and reddish.
To know more about chlorination refer to: https://brainly.com/question/13347874
#SPJ1
What is a foram and what is curious about the foram fossils of gubbio’s limestone?
Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean. Now exposed, they represent over a million years of a geological time period known as the Cretaceous.
Walter Alvarez found that forming a distinct boundary between the limestone of the two periods was a thin layer of red clay. Immediately below this clay boundary, the Cretaceous limestone was heavily populated with a wide mix of the fossils of tiny marine creatures called foraminifera, or “foram” for short.
On the Atlantic Coast, outside the town of Zumaia, Dutch geologist Jan Smit was studying the forams from a different ancient sea. Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean.
Learn more about limestone here: https://brainly.com/question/13723417
#SPJ4
Find the empirical formula for a compound consisting of 63% MN and 37% O.
Answer:
Mn₁O₂
Explanation:
To find the empirical formula, you need to (1) determine how many grams of each element are within the compound, then (2) convert grams to moles (via the atomic masses of each element), and then (3) determine the mole-to-mole ratio of each element.
(Step 1)
Because the percents add to equal 100%, we can say that each percent is the mass of each element.
63% Mn ----> 63 grams Mn
37% O ----> 37 grams O
(Step 2)
We need to convert each mass to moles using the atomic masses. The atomic masses are a ratio comparing the mass of each element per every 1 mole.
Atomic Mass (Mn): 54.983 g/mol
Atomic Mass (O): 15.998 g/mol
63 grams Mn 1 mole
---------------------- x ------------------------- = 1.15 moles Mn
54.983 grams
37 grams O 1 mole
-------------------- x ------------------------ = 2.31 moles O
15.998 grams
(Step 3)
You can find the mole-to-mole ratio of each element in the compound by dividing the calculated mole values by the smallest mole value. In this case, since 1.15 moles was the smallest value calculated, it should be the divisor. The resulting amounts are the subscripts within the empirical formula.
1.15 moles Mn / 1.15 moles = 1 moles Mn
2.31 moles O / 1.15 moles = 2 moles O
Ratio of MnO = 1:2
This make the empirical formula: Mn₁O₂
What is the empirical formula for a compound if 300. 00 g of it is known to contain 82. 46224 g of molybdenum, 45. 741 g of chlorine and the rest is bromine?
the empirical formula for a compound is Mo2Br5Cl3.
The empirical components of a compound are the best entire quantity ratio of atoms of every detail within the compound. it's miles decided using statistics from experiments and therefore empirical. as an example, the molecular formula of glucose is C 6H 12O 6 however the empirical formulation is CH 2O.
An Empirical formula is the chemical components of a compound that offers the proportions (ratios) of the elements present in the compound however no longer the real numbers or arrangement of atoms. This will be the lowest complete range ratio of the elements within the compound.
The empirical method of a compound gives the only ratio of the range of various atoms gift, while the molecular formula gives the actual range of each distinctive atom found in a molecule. If the components is simplified then it is an empirical components.
Learn more about the Empirical formula here: https://brainly.com/question/13058832
#SPJ4
Consider the chemical equation in equilibrium. CH4(g) H2O(g) CO(g) 3H2(g) What will happen to the equilibrium of this reaction if the pressure is increased
The equilibrium of this reaction will shift to the left to favor the reverse reaction if the pressure is increased.
Balanced chemical equation
CH₄(g) + H₂O(g) → CO(g) + 3H₂(g)
The principle suggests
The equilibrium will move to the side of the reaction where there are fewer moles of gas as pressure increases.
And the equilibrium will move toward the side of the reaction where there are more gas molecules when the pressure is reduced.
In the given chemical equation
The no. of moles of reactant = 2
The no of moles of the product = 4
Total moles of reactant is less than that of total moles of product
Therefore, If the pressure is increased the equilibrium of this reaction will shift to the left to favor the reverse reaction.
Learn more about Le Ch-atilier's principle here https://brainly.com/question/3384381
#SPJ1
Write the balanced chemical equation for the reaction of aqueous sodium sulfate
and solid calcium chloride to produce aqueous calcium sulfate and solid sodium
chloride
The equation of the reaction is [tex]Na_2SO_4 (aq) + CaCl_2 (s) --- > CaSO_4 (aq) +2 NaCl (s)[/tex]
What are chemical reactions?They are reactions involving chemical reactants leading to the formation of chemical products.
The chemical formula for sodium sulfate is [tex]Na_2SO_4[/tex]
The chemical formula for calcium chloride is [tex]CaCl_2[/tex]
The two react to produce calcium sulfate ([tex]CaSO_4[/tex]) and sodium chloride (NaCl) according to the following equation:
[tex]Na_2SO_4 (aq) + CaCl_2 (s) --- > CaSO_4 (aq) +2 NaCl (s)[/tex]
More on chemical reactions can be found here: https://brainly.com/question/22817140
#SPJ1
The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) Group starts
The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine: TRUE
What is the book value?Book value is the worth of an asset based on its balance sheet account balance in accounting. The value of an asset is determined by subtracting the asset's original cost from any depreciation, amortization, or impairment expenses. Traditionally, a company's book value is equal to its total assets minus intangible assets and liabilities. In practice, however, depending on the source of the computation, book value may include either goodwill or intangible assets, or both. The value inherent in its employees, which is part of a company's intellectual capital, is always overlooked. When intangible assets and goodwill are specifically omitted, the indicator is frequently defined as "tangible book value."Therefore, the statement "the book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine" is TRUE.
Know more about Book Value here:
https://brainly.com/question/23057744
#SPJ4
Complete question:
The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) TRUE or FALSE
According to the modern periodic law the properties of elements are periodic function of their
Please help me i really need it!
The average atomic mass of sulfur = 32.33 u
What is the average atomic mass of sulfur?The average atomic mass of sulfur is determined as follows:
Average atomic mass = (31.977 × 0.818) + (32.97 × 0.008) + (33.97 × 0.174)
Average atomic mass = 32.33
In conclusion, the average atomic mass of sulfur is determined from the sum of the isotopic masses and their relative abundance.
Learn more about average atomic mass at: https://brainly.com/question/6200158
#SPJ1
A compound's molar mass is 240g/mol. its percentage composition is 75% carbon, 5.05% hydrogen and 19.95% oxygen, what is the molecular formula?
explanation please
The molecular formula of the compound is C15H12O3.
What is the molecular formula of the compound?The molecular formula of the compound is determined from the mole ratio of the elements in the compound.
Carbon = 0.75 × 240/12 = 15
Hydrogen = 0.0505 × 240/1 = 12
Oxygen = 0.1995 × 240/16 = 3
Therefore, the molecular formula of the compound is C15H12O3
In conclusion, the molecular formula of the compound is determined from the mole ratio of the elements and their percentage composition.
Learn more molecular formula at: https://brainly.com/question/15092254
#SPJ1
What is a molecular dipole moment?
What is the bonding requirement for carbon atoms?
Answer:
carbon atoms tend to make four bonds, each carbon atom will have the number of hydrogen atoms that are required for four bonds. This compound contains 16 hydrogen atoms for a molecular formula of C 8 H 16.
Explanation:
Please help!! Balancing Nuclear Equations
The missing part of the equation is found to be 4/2He. Option A
What are nuclear equations?The term nuclear equations have to do with the type of equation in which one type of nucleus is transformed into another sometimes by the bombardment or loss of a particle.
Now the full equation ought to be written as 7/3Li + 1/1H -----> 4/2He + 4/2He. This is because the total mass on the left is 8 and the total charge on the left is 4.
Learn more about nuclear equations:https://brainly.com/question/19752321
#SPJ1
Consider the reaction and its equilibrium constant at 25.0 ∘C :
CO(g)+2H2(g)⇌CH3OH(g) , Kp=6.09×10−3
A reaction mixture contains P(CO)=0.265atm , P(H2)=0.265atm , and P(CH3OH)=0.265atm .
Is the reaction mixture at equilibrium?
Since Qp>Kp , the reaction is not at equilibrium
Since Qp
Since Qp=Kp , the reaction is at equilibrium
Since Qp=Kp , the reaction is not at equilibrium
Since Qp>Kp , the reaction is not at equilibrium.
What is the equilibrium constant?The equilibrium constant shows the extent to which reactants are converted into products.
Now we have to obtain the Qp as follows;
Qp =[CH3OH]/[CO] [H2]^2
Qp = 0.265/(0.265) (0.265)^2
Qp = 14.2
Now we know that Kp = 6.09×10−3, Since Qp>Kp , the reaction is not at equilibrium.
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
Nuclear decay occurs according to first-order kinetics. What is the half-life of zinc-65 if a sample decays from 65.0 g to 2.90 g in 3.0 years
Answer:
Explanation:
244 days
will you brainlyest?
The half life of the Zn-65 sample if it decays from 65 g to 2.9 g in 3 years is 1.53 years. This can be obtained using the first order kinetic of nuclear decay.
What is nuclear decay?Nuclear decay is the process by which unstable isotopes of an atom decays by the emission of alpha or beta particles to form stable nuclei. Nuclear decay is a first order reaction and the decay constant k can be written as:
k = 1/t log [no]/[nt]
Where, no and nt be the initial and final amount of the sample.
Given that the initial mass of Zn was 65 g and after 3 years it is 2.90 gram. Thus, decay constant is calculated as :
k = 1/3 yrs log (65/2.9)
= 0.45 yr⁻¹.
Now, the half life of Zn-65 can be calculated as:
t1/2 = 0.693/ k
= 0.693/0.45 yr⁻¹
= 1.53 yrs.
Therefore, the half life of Zn-65 will be 1.53 years.
To find more on nuclear decay, refer here:
https://brainly.com/question/12224278
#SPJ2
Grant plans to evaporate enough water from 22 gallons of a 16 mmonia solution to make a 24 mmonia solution. Which equation can he use to find n, the number of gallons of water he should remove?
He can use 3.52/22-n = 24/100 equation to find n, where n is the number of gallons of water.
Calculation of amount of ammonia in 22 gallon of 16% ammonia solution.
amount of ammonia = 16%×22 gallon = 3.53 gallon
The amount of ammonia remains the same after evaporation of water but the total amount of solution is reduced because solution contain ammonia as well as water . So, if water is evaporate then solution reduced.
Amount of water remains = 22 - n
Desired concentration, 24% = 24/100
Therefore the final equation becomes,
3.52/22-n = 24/100
learn about ammonia,
https://brainly.com/question/12276882
#SPJ2
The table shows the amount of radioactive element remaining in a sample over a period of time. radioactive decay rate amount of radioactive sample (grams) time (years) 56.0 0 47.1 400 39.6 800 33.3 1,200 28 1,600 part 1: what is the half-life of the element? explain how you determined this. part 2: how long would it take 312 g of the sample to decay to 9.75 grams? show your work or explain your answer.
1. The half life of the element, given the data from the question is 1600 years
2. The time taken for 312 g of the sample to decay to 9.75 grams is 8000 years
1. How to determine the half life of the elementHalf-life is the time taken for half a material to decay.
To determine the half life of the given element, do the following:
Original amount = 56 gHalf the original amount = 56 / 2 = 28 gTime for 28 g = 1600 yearHalf life of element = 1600 yearsHow to determine the timeWe'll begin by determining the number of half-lives that has elapsed. This can be obtained as follow:
Original amount (N₀) = 312 gAmount remaining (N) = 9.75 gNumber of half-lives (n) =?2ⁿ = N₀ / N
2ⁿ = 312 / 9.75
2ⁿ = 32
2ⁿ = 2⁵
n = 5
Finally, we shall determine the time. This can be obtained as follow:
Half-life (t½) = 1600 yearsNumber of half-lives (n) = 5Time (t) =?t = n × t½
t = 5 × 1600
t = 8000 years
Learn more about half life:
https://brainly.com/question/26374513
#SPJ1
JUST TO BE CLEAR, I DON'T NEED THE ANSWER TO THIS QUESTION, BUT I REALIZED THAT NO ONE HAS ASKED THIS QUESTION SO I'M ASKING AND ANSWERING MY OWN QUESTION! This is in regards to a lab that deals w/ "Absorption and Radiation by Land and water" where you identify variables in the effect of type of material on Absorption experiment!
Question: Answer the questions using the drop-down menus.
Which is the independent variable in this experiment?
Answer: type of material
Which is the dependent variable in this experiment?
Answer: temperature of material
Which is a controlled variable in this experiment?
Answer: amount of heat materials received
And IK these are the right answers because I just took the test on Edge, and these answers are right.
Based on the type of experiment that is being conducted:
The independent variable is: type of materialsThe dependent variable is: temperature of materialThe controlled variable is the amount of heat materialWhat is an independent variable?This is the term that is used to refer to the variable that is used to arrive at conclusions about the dependent variable.
The experiment is trying to tell us that the temperature of a material is the function of the heat applied to it and the type of material.
The dependent variableThis is the term that is used to refer to the variable of interest. It is what is being tested in the experiment.
Read more on dependent and independent variables here:
https://brainly.com/question/25223322
#SPJ1
Four students all do the same experiment for the science fair. They test reaction times for pushing a button when a specific color is shown. Their data is as follows: ⎡⎣⎢⎢⎢⎢⎢⎢⎢⎢⎢⎢Student 1Student 2Student 3Student 4Reaction Time (seconds)Trial 10.440.350.410.42Trial 20.410.430.520.43Trial 30.470.380.570.41Trial 40.390.390.460.42Trial 50.460.420.550.41Trial 60.420.440.490.42⎤⎦⎥⎥⎥⎥⎥⎥⎥⎥⎥⎥ Put the students in order from most to least reliable data. A. Student 3, Student 2, Student 1, Student 4 B. Student 2, Student 1, Student 4, Student 3 C. Student 4, Student 1, Student 2, Student 3 D. Student 1, Student 2, Student 3, Student 4
The order of the students from the most reliable to the least reliable is C. Student 4, Student 1, Student 2, Student 3.
what student has the most reliable data?the student with the most reliable data is the one that has the least variation in their data in the various trials.
this student is therefore student 4.
the next student would be student 1 and student 2 would be the third most reliable.
student 3 has large variations in their trials which makes their data the least reliable.
find out more on reliable data at https://brainly.com/question/8391667.
#SPJ1
If a car travels 300 kilometers in 3 hours, its average speed is 100 km/hr.
true or false
Answer:
speed=distance/time taken
=300km/3hr
=100km/hr
So it is true.
please give brainlest and like
A chemist want to prepare a solution containing (soluble) silver ions. Which salt should they use? silver nitrate AgCI AgOH silver carbonate 2 pts
Answer: silver nitrate
Explanation:
it is the only soluble salt listed.