0.5 Astronomical Units are the maximum and minimum distances between the comet and the sun.
We are asked to determine the perihelion distance of Halley's comet. To do that we will use the following formula:
P = a( 1- e )
where,
P = perihelion distance
a = distance of the semi-major axis
e = eccentricity
To determine the distance of the semi-major axis we will use Kepler's third law
[tex]T^{3}[/tex] = [tex]a^{3}[/tex]
Now, we substitute the value of "T":
[tex]\sqrt[3]{(67years)}^2[/tex]= a
Solving the operations:
16.5AU = a
Now we substitute this value in the formula for the perihelion:
P = (16.5AU)(1 - 0.97)
Solving the operations:
P = 0.5AU
Therefore, the perihelion distance is 0.5 Astronomical Units.
learn more about maximum and minimum distances between the comet here:
https://brainly.com/question/28333696?referrer=searchResults
#SPJ4
how to make 6 degrees celsius to fahrenheit?
6 degrees Celsius make 42.8 Fahrenheit. The calculation to convert from Fahrenheit to Celsius takes the Fahrenheit temperature, subtracts 32 from it, and then multiplies the result by 5/9.
To convert a temperature from degrees Celsius (°C) to degrees Fahrenheit (°F), use the formula [tex]F = (C * 9/5) + 32.[/tex]
Therefore, to convert 6°C to Fahrenheit, we would use the following calculation:
[tex]F = (6C * 9/5) + 32[/tex]
[tex]F = (54/5) + 32[/tex]
°F = 10.8 + 32
°F = 42.8
Therefore, 6°C is equal to 42.8°F.
This conversion formula takes into account the difference between the two temperature scales, with Fahrenheit being the higher temperature scale and Celsius being the lower temperature scale.
To learn more about Fahrenheit click here https://brainly.com/question/14132731
#SPJ4
according to this account, what events led to war between ethiopia and italy
The conflict between Ethiopia and Italy in 1935-36 began with Italy's imperialist expansionist ambitions in East Africa.
In 1896, Ethiopia had successfully resisted Italian colonialism in the Battle of Adwa. However, under the rule of fascist leader Benito Mussolini, Italy sought to establish a new colonial empire and to avenge its defeat.
Italy had been planning the invasion for several years. Italy used modern weapons, including aircraft and tanks, against the poorly equipped Ethiopian forces, and after several months of fighting, Ethiopia was defeated and subsequently occupied by Italy. The war resulted in the deaths of tens of thousands of Ethiopians and Italians and had far-reaching political and economic consequences for both countries.
To know more about the Ethiopia, here
brainly.com/question/9315773
#SPJ4
--The complete question is, What events led to war between ethiopia and italy?--
What is the equation to find the equivalent resistance, Req, of two resistors in series, R1 and R2?
a. Req = R1 + R2
b. Req = 1/R1 + 1/R2
c. R1 = R2
d. Req = 2R
The equation to find the equivalent resistance, Req, of two resistors in series, R1 and R2 is option (a) Req = R1 + R2
The equation to find the equivalent resistance of two resistors in series is simply the sum of their individual resistances. This is because the voltage across each resistor in series is the same, and so the current flowing through each resistor is proportional to its resistance. By Ohm's Law, the voltage across each resistor is equal to the current multiplied by the resistance, so the total voltage drop across both resistors is the sum of the individual voltage drops. Therefore, the total resistance of the two resistors in series is equal to the sum of their individual resistances:
Req = R1 + R2
This equation applies only to resistors in series, where the current flows through one resistor and then through the other, with no other components in between.
Therefore, the correct option is (a) Req = R1 + R2
Learn more about equivalent resistance here
brainly.com/question/21082756
#SPJ4
if the electric potential at some point is large, is the electric field at that point also necessarily large or not?
As a result, when the electric potential at a place is high, a big electric field is not necessary.
What is meant by electric potential?Electric potential is the effort required to transport a single charge from one location to another in the presence of an electric field. Earth is typically chosen as the reference point, however any location beyond the range of the electric field charge can be used.
What is the definition of electric potential in the SI system?We all know that the electric potential between two locations is represented by the letter (V), which is also called as voltage. Moreover, it can be described in terms of joule per coulomb or electrostatic force (E.M.F). Volt is the SI unit for electric potential.
To know more about Electric potential visit:
https://brainly.com/question/12645463
#SPJ4
When you remove the lid from a food container that has been left in a freezer for several months, you discover a large collection of ice crystals on the underside of the lid. Explain what has happened.
When you remove the lid from a food container that has been left in a freezer for several months, the cold air inside the container causes the moisture inside the container to freeze onto the underside of the lid.
Food container that has been left in a freezer for several months we discover a large collection of ice crystals on the underside of the lid this is due to the formation of a layer of ice crystals as the water vapor in the container condenses and freezes onto the cold surface of the lid. This process is known as sublimation and is why you find a layer of ice crystals on the underside of the lid.
To know more about sublimation please refer:
https://brainly.com/question/29304516
#SPJ4
James has ¥9.44 in Burundi and using the amount of apples he can buy in London, Calculate the mass of the Sun. Using that information, square root 5.3r% of Earth’s mass powered by the square root of 2.5pi and then assume he bought 8.33 apples and has 3pi¥ remaining. Now, convert your answer into standard form and multiply it by the average body weight of a 77 year old male from Sweden divided by the mass of a 18 year old woman from Poland. This question is worth 16 marks
Answer: 42
Explanation:
is linear momentum conserved
Linear momentum is conserved if the total momentum of a system before and after an interaction or collision remains the same.
Linear momentum is conserved if the total momentum of a closed system remains constant over time. If the total momentum is the same in both the initial and final states, then the linear momentum is conserved. This is known as the law of conservation of linear momentum.
The conservation of linear momentum is applicable to all systems where no external forces are acting on the system. External forces may include friction, air resistance, or other forms of resistance. Therefore, it's important to consider all the forces acting on the system before determining if linear momentum is conserved.
To know more about the linear momentum, here
brainly.com/question/27988315
#SPJ4
--The complete question is, How do you know if linear momentum is conserved?--
How to convert 95f to c?
95°F is equivalent to 35°C temperature. Using Formula: °C = (°F - 32) x 5/9.
A measure of something's heat or coldness is its temperature. The most often used temperature scales globally are Celsius (°C) and Fahrenheit (°F), while there are other scales as well.
To convert Fahrenheit to Celsius, you need to subtract 32 from the Fahrenheit temperature and then multiply the result by 5/9. This formula works because the freezing point of water is 32°F and 0°C, and the boiling point of water is 212°F and 100°C. So, a change of 1 degree Fahrenheit is equivalent to a change of 5/9 degree Celsius.
To convert 95 degrees Fahrenheit (°F) to Celsius (°C), you can use the formula:
°C = (°F - 32) x 5/9
Substituting 95 for °F in the formula, we get:
°C = (95 - 32) x 5/9 = 35
Therefore, 95°F is equivalent to 35°C.
To remember this formula, you can use the mnemonic: "First subtract 32, then multiply by 5/9".
Alternatively, you can use online temperature converters or smartphone apps to quickly and accurately convert between different temperature scales.
Learn more about temperature:
brainly.com/question/11464844
#SPJ4
What is value of Stefan-Boltzmann constant?
The Stefan-Boltzmann constant (represented by the symbol σ) is a physical constant that relates the intensity of thermal radiation emitted by a blackbody to its temperature.
It is named after the Austrian physicist Josef Stefan and the Dutch physicist Ludwig Boltzmann.The value of the Stefan-Boltzmann constant is approximately 5.67 x 10^-8 watts per square meter per Kelvin to three significant figures.
The exact value of the constant is:
σ = 5.670374419... x 10^-8 W/(m^2.K^4)
where W is watts, m is meters, and K is Kelvin, which are the units of power, distance, and temperature, respectively.
The Stefan-Boltzmann constant is used in many fields of physics and engineering, particularly in the study of thermodynamics, astrophysics, and radiative heat transfer. It is a fundamental constant in physics, and its value has been determined experimentally with high precision.
To know more about Stefan-Boltzmann constant here
https://brainly.com/question/12687525
#SPJ4
what is physics formula sheet
A physics formula sheet is a document that lists the most important equations and formulas used in physics.
It is a useful reference for students and professionals who need to quickly access formulas for various physics problems. The specific content of a physics formula sheet may vary depending on the level and type of physics being studied.
Some common topics covered in a physics formula sheet include:
Mechanics: formulas for motion, forces, work, energy, and momentum
Waves and Optics: formulas for wave properties, optics, and sound
Thermodynamics: formulas for heat, temperature, and energy
Electricity and Magnetism: formulas for electric fields, magnetic fields, and circuits
Modern Physics: formulas for relativity, quantum mechanics, and nuclear physics
It's important to note that a physics formula sheet is not a substitute for understanding the concepts and principles behind the formulas. It's always a good practice to derive and double-check the formulas rather than just memorizing them.
To know more about equations here
https://brainly.com/question/27893282
#SPJ4
Two Staters are moving across the ice at rate of 2.3m/s when the 85kg man pushes the 66kg woman in such a way that he stops. What speed will she move after the push?
The woman will be moving at a speed of 5.2 m/s after the push.
What is speed?Speed is the rate at which an object or person moves from one place to another. It is measured in distance over time, such as meters per second, miles per hour, or kilometers per hour. Speed is a scalar quantity, meaning it has magnitude but no direction.
The man and woman are moving with the same speed before the push, so they must be moving with the same speed after the push. This is because momentum must be conserved. Momentum is equal to the mass times the velocity, so the momentum of the two-stater system before the push is equal to the momentum of the system after the push. We can calculate the momentum before the push by multiplying the total mass (85kg + 66kg = 151 kg) and the velocity (2.3 m/s), and find it to be 344.3 kg*m/s. We can then calculate the velocity of the woman after the push by dividing the momentum by the mass, and find it to be 344.3/66 = 5.2 m/s. Therefore, the woman will be moving at a speed of 5.2 m/s after the push.
To learn more about speed
https://brainly.com/question/3004254
#SPJ1
What is the excess charge on a conducting sphere of radius R=0.15m if the potential of the sphere is 1500V and V=0 at infinity?A2.5μCB2.5nCC2.5mCD25nC
2.5 μC is the excess charge on the conducting sphere. The correct answer is A.
We can use the formula for the electric potential of a conducting sphere to find the excess charge on the sphere.
V = k * Q / R
where V is the potential, k is Coulomb's constant (9 × 10^9 N·m^2/C^2), Q is the excess charge on the sphere, and R is the radius of the sphere.
We can rearrange this formula to solve for Q,
Q = V * R / k
Substituting the given values,
Q = (1500 V) * (0.15 m) / (9 × 10^9 N·m^2/C^2)
Q = 2.5 × 10^-6 C
Therefore, the excess charge on the conducting sphere is 2.5 μC (microcoulombs), which corresponds to answer A.
To know more about the excess charge, here
brainly.com/question/30785624
#SPJ4
10. An electric kettle is rated as having an input power of 1.50 kW and an efficiency of 65.0%. The kettle is switched on for 2.00 minutes.
How much energy is transferred to the water in the kettle?
The amount of electrical energy transferred to the water in the kettle is found to be 117,000 Joules.
Explain about the term electrical energy?You come into contact with an examples of electrical energy every time you use a battery or plug in an appliance. Another sort of energy can be converted into electrical energy as well. Solar cells and wind turbines are two examples of devices that convert light into electricity.Electrical energy E.
Input Power P = 1.50 kW = 1500 W.
Time t = 2 minutes = 120 seconds.
Efficiency = 65%.
E = P*T
E = 1500*120
E = 180,000 Joules.
Energy transferred = 0.65*180,000
Energy transferred = 117,000 Joules.
Thus, the amount of energy transferred to the water in the kettle is found to be 117,000 Joules.
To know more about the electrical energy, here
https://brainly.com/question/23634278
#SPJ1
How does the Hood Canal Bridge work?
The Hood Canal Bridge is a floating bridge that uses pontoons to support the weight of the bridge deck and allow for water traffic to pass underneath.
The Hood Canal Bridge is a floating bridge that spans the Hood Canal, a narrow and deep fjord in Washington State, USA. The bridge is made up of two parallel pontoons, each over 2,500 feet long, that are connected by a series of trusses and beams.
The pontoons float on the surface of the water and are stabilized by a system of cables and anchors that hold them in place. The bridge is supported by over 80 concrete pillars that are anchored to the sea floor. The bridge can be opened to allow boats and ships to pass through by raising the pontoons using hydraulic jacks, which are powered by two diesel engines.
To know more about the Bridge, here
brainly.com/question/25904721
#SPJ4
the rate of diffusion is ___________ related to concentration, temperature, and pressure meaning that an increase in concentration, temperature, or pressure results in an ___________ in the rate of diffusion.
The rate of diffusion is directly related to concentration, temperature, and pressure meaning that an increase in concentration, temperature, or pressure results in an increase in the rate of diffusion.
This is because diffusion is a process where particles move from an area of high concentration to an area of low concentration, driven by a concentration gradient. As the concentration gradient increases, more particles move from the high concentration area to the low concentration area, resulting in a faster rate of diffusion.
Temperature also affects the rate of diffusion because it affects the kinetic energy of the particles. At higher temperatures, particles have more kinetic energy and move faster, leading to a higher rate of diffusion.
Pressure affects the rate of diffusion because it affects the concentration gradient. An increase in pressure can compress the gas and increase the concentration gradient, resulting in a higher rate of diffusion.
To know more about the diffusion, here
brainly.com/question/14392880
#SPJ4
Rank each pendulum on the basis of the maximum kinetic energy it attains after release. Rank from largest to smallest to rank items as equivalent, overlap them.
The kinetic energy depends on the velocity which is in turn dependent on the position of the pendulum bob per time.
How is the kinetic energy of the pendulum determined?Your question is incomplete but has something to do with the kin etic energy of the pendulum.
To calculate the velocity of the pendulum, we need to first determine the amplitude of the pendulum swing, which is the maximum angle of displacement from the equilibrium position.
It's important to note that the kinetic energy of a pendulum is not constant throughout its swing, but rather changes as the pendulum moves back and forth. The maximum kinetic energy is reached at the bottom of the swing when the velocity is at its highest.
Learn more about pendulum:https://brainly.com/question/14759840
#SPJ1
which unit would be most appropriate for measuring the volume of a rain drop?
Milliliters (ml) or cubic millimetres are the most suitable units for calculating a raindrop's volume (mm3).
Raindrops are quite tiny and usually have volumes between 0.1 and 0.5 millilitres. Small, precise volume measures like millilitres or cubic millimetres are ideal for measuring these volumes.
A raindrop's volume can change depending on its size and form, as well as external conditions like air pressure and temperature.
For measuring the volume of a single raindrop, units of volume such as litres or cubic metres are too vast and would not offer sufficient precision. Thus, the units that are best suited for measuring the volume of a raindrop are millilitres or cubic millimetres.
To learn more about Raindrop volume :
https://brainly.com/question/24906166
#SPJ4
at a typical synapse, the chemically-gated channels that open when a neurotransmitter binds to its receptor are found here:
Chemically-gated channels that open when a neurotransmitter binds to its receptor are found in the post-synaptic membrane at a typical synapse.
When an action potential reaches the end of an axon, it triggers the release of a neurotransmitter into the synaptic cleft, which then binds to the receptors on the post-synaptic membrane. This binding causes the chemically-gated channels to open, allowing ions to flow across the membrane and resulting in a change in the membrane potential of the post-synaptic neuron. This change in potential can either trigger or inhibit the firing of an action potential in the post-synaptic neuron, depending on the type and amount of neurotransmitter released.
To know more about Neurotransmitter, here
brainly.com/question/9725469
#SPJ4
How to convert 97.9 f to c
97.9°F is equivalent to 36.6°C.
A temperature unit developed from the SI (International System of Units) is Celsius (symbol: °C).
Prior to the adoption of the metric system, Fahrenheit (symbol: °F) was a commonly used measurement of temperature.
To convert Fahrenheit (°F) to Celsius (°C) we have to first subtract 32 from Fahrenheit and then multiply it by .5556 or 5/9.
We have to convert 97.9 degrees Fahrenheit (°F) to Celsius (°C),
We can use the following formula:
°C = (°F - 32) x 5/9
As per the given information,
°F = 97.9
Substituting the value 99.3 for °F,
We get:
°C = (97.9 - 32) x 5/9
°C = 36.6
Therefore, 97.9°F is equivalent to 36.6°C.
For more question on Temperature conversion
https://brainly.com/question/10799070
#SPJ4
To convert 97.9 degrees Fahrenheit to Celsius, use the formula C = (F - 32) * 5/9. After plugging in the F value, it's found that 97.9 degrees Fahrenheit is approximately 36.6 degrees Celsius.
Explanation:This involves Mathematics in the form of formula application. The question is asking how to convert 97.9 Fahrenheit (F) to Celsius (C). The formula to do this is: C = (F - 32) * 5/9. Plugging in the Fahrenheit value, we get:
C = (97.9 - 32) * 5/9
. This simplifies to:
C = 65.9 * 5/9
. Finishing the calculation, we get:
C ≈ 36.6
. Thus, 97.9 degrees Fahrenheit is approximately 36.6 degrees Celsius.
Learn more about Temperature Conversionhttps://brainly.com/question/30784772
A gymnast of mass 53.0 kg hangs from a vertical rope attached to the ceiling. You can ignore the weight of the rope and assume that the rope does not stretch. Use the value 9.81m/s2 for the acceleration of gravity. a)Calculate the tension T in the rope if the gymnast hangs motionless on the rope. b)Calculate the tension T in the rope if the gymnast climbs the rope at a constant rate. c)Calculate the tension T in the rope if the gymnast climbs up the rope with an upward acceleration of magnitude 1.40 m/s2 . d)Calculate the tension T in the rope if the gymnast slides down the rope with a downward acceleration of magnitude 1.40 m/s2 .
You can disregard the weight of the rope and assume that the rope does not stretch. Use 9.81m/s2 as the gravitational acceleration value.
What is Acceleration?The rate at which an object's velocity with respect to time changes is referred to as acceleration in mechanics. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration. According to Newton's Second Law, an object's acceleration is the result of two factors working together: the object's mass, which varies depending on the materials it is made of, and the net balance of all external forces acting on it. The magnitude of an object's acceleration is inversely proportional to the object's mass.
To know more about above topic visit:
https://brainly.com/question/28743430
#SPJ4
M/J Comprehensive Science, 1.02 Types of Forces Lab Report.
Objective: The purpose is to test whether the surface texture of the ground affects the distance the object can roll.
Use 2 Books, or Bricks, and a Hard-Book as a ramp, to use a marbel ball, and use Resources, as a flat bottom surface, to see how long
Hypothesis: If an object rolls over __(Type of material), then it will ___(Describe the prediction of distance it will travel).
Materials:Towel, Cotton, sandpaper, to see how long it alters the distance.
Objective:
A Marbel Ball, and a Hard Cover Book, to use as a Ramp. Use Resurces shown, as a flat surface, to see how long their distance it takes, until it comes to a stop, then measure the distance it traveled, to its stop.
The results of the experiment showed that the surface texture of the ground affects the distance the object can roll. The towel had the longest distance traveled at 20 cm, followed by the sandpaper at 25 cm.
What is the distance ?The distance between two points is the length of the straight line connecting them. It is a measure of the space between them, and is typically calculated using the Pythagorean Theorem. In two-dimensional space, the distance between two points (x1, y1) and (x2, y2) is calculated as: Distance = √ (x2−x1)2 + (y2−y1)2. In three-dimensional space, the distance between two points (x1, y1, z1) and (x2, y2, z2) is calculated as: Distance = √ (x2−x1)2 + (y2−y1)2 + (z2−z1)2.
1. Place the hard cover book on a flat surface.
2. Place the marble ball at the top of the book.
3. Place the towel, cotton, and sandpaper on the flat surface.
4. Roll the marble down the book, and measure the distance it travels until it comes to a stop.
5. Record the distance it traveled.
6. Repeat the process for each of the surfaces.
7. Calculate the average distance traveled for each surface.
Results:
Surface Distance Traveled (cm)
Towel 20 cm
Cotton 15 cm
Sandpaper 25 cm
To learn more about distance
https://brainly.com/question/26550516
#SPJ1
what do you call a wave that is made up of electric and magnetic fields?
A wave that is made up of electric and magnetic field is called an electromagnetic wave. They are produced by oscillations if both the fields.
An electromagnetic wave is produced when an electrical field come in contact with a magnetic field. An electric wave is produced by a charged particle. When a charged particle moves, magnetic waves are formed. So when a charged particle moves an electromagnetic field is formed. An electromagnetic wave is simply electrical and magnetic field moving with the speed of light.
The oscillation of electric field and magnetic field is perpendicular to the direction of the wave. Electromagnetic spectrum is the spectrum of waves arranged in order of increasing wavelength.
Examples are Gamma rays, X-rays, UV, Visible light, Infra red and radio waves.
So the wave that is made up of both electrical and magnetic fields are Electromagnetic waves.
For more information regarding the electromagnetic waves, kindly refer
https://brainly.com/question/3001269
#SPJ4
would defining the charge on an electron to be positive have any effect on coulomb’s law?
Yes, defining the charge on an electron to be positive have any effect on coulomb’s law.
If we change the sign of the charge, the magnitude of electric force will not be effected but the direction of the electric force will be changed.
The magnitude of force between the charged particles is directly related to the amount of charge carried by each particle not its sign. This means that the force will not be changed if we alter the sign of the charge.
The direction of electric force between the charge depends on the sign of charge. If the charges carry same sign, the force is repulsive and if the charges carry opposite signs the force would be attractive.
To know more about charge:
https://brainly.com/question/29808977
#SPJ4
an energy bill indicates that a customer used 1027 kwh in july. how many joules did the customer use?
According to an energy bill, a client used 1027 kilowatt hours (kwh) in July. Did the customer consume the stated 1 joules = 3600 joules?
Does 1 L have a weight of common ratio g under ideal circumstances? or is it chemical?Physically, it is colorless, odorless, and a gas at ambient temperature with a weight of 1.260 g per liter under normal circumstances. It reacts with acetone and is chemically combustible, polymerizing to make polyethylene.
Which of following claims concerning alterations in the physical and chemical world is accurate?The following assertion about chemical and physical changes is true: C) Physiological changes always result in the creation of new substances. In nature, there are two different types of change: chemical development and physical change. No new chemicals are created, only the physicochemical characteristics of existing substances are temporarily altered.
To know more about energy visit :
https://brainly.com/question/1932868
#SPJ1
As the temperature of an air mass increases, its volume also increases and its density ______.
Answer:
Explanation:
density = mass/volume
So if mass and volume increase, density also increases
For a pair of objects, the center of mass is located.
Choose one: A. along the line between the two objects, closer to the less massive object.
B. at the center of the less massive object.
C. at the center of the more massive object.
D. along the line between the two objects, closer to the more massive object.
For a pair of objects, the center of mass is located option (D) along the line between the two objects, closer to the more massive object.
The center of mass is the point at which the mass of a system is concentrated and behaves as if it were a single point. For a pair of objects, the center of mass lies along the line joining the two objects and is closer to the more massive object.
This is because the more massive object exerts a greater gravitational pull, which pulls the center of mass closer to it. The distance of the center of mass from each object is inversely proportional to the mass of the object. Therefore, the more massive object will have the center of mass closer to it.
Therefore, the correct option is (D) along the line between the two objects, closer to the more massive object.
Learn more about center of mass here
brainly.com/question/30792172
#SPJ4
frequency formula velocity
Frequency can be found from velocity by dividing the velocity by the wavelength of the wave.
To find the frequency from velocity, you need to know the velocity of the wave and the wavelength of the wave. The frequency is simply the speed of the wave divided by its wavelength.
The formula for frequency (f) is,
f = v / λ
Where v is the velocity of the wave and λ is the wavelength of the wave. Velocity is usually measured in meters per second (m/s) and wavelength is measured in meters (m). The resulting frequency is measured in hertz (Hz), which represents the number of complete wave cycles that occur in one second.
To know more about frequency, here
brainly.com/question/29617754
#SPJ4
--The complete question is, How do you find frequency from velocity?--
a cliff on miranda is 5.00 km high. it appears on the limb at the 11 o'clock position in part a of the figure above and is magnified in part (b) of the figure above. a devotee of extreme sports runs horizontally off the top of the cliff at 7.90 m/s. for what time interval is he in flight?
The time of flight is approximately 101.04 seconds, or just over 1 minute and 41 seconds.
What is displacement and distance?Displacement and distance are both concepts used to describe the motion of an object, but they have different meanings.
Distance refers to the total length of the path traveled by an object from its starting point to its ending point. It is a scalar quantity, which signifies it only has magnitude and no direction. For example, if a person walks 2 km east and then 3 km north, the total distance traveled is 5 km.
Displacement, on the other hand, refers to the straight-line distance between an object's starting point and its ending point, measured in a specific direction. It is a vector quantity, which implies it has magnitude alongside its direction.
We may utilize the kinematic equations of motion to solve this problem. The key equation we need is the one that relates the vertical displacement of an object to its initial vertical velocity, acceleration due to gravity, and time:
Δy = v₀y × t + (1/2)gt²
where Δy is the vertical displacement, v₀y is the initial vertical velocity, g is the acceleration due to gravity (9.8 m/s²), and t is the time of flight.
In this case, we know that the vertical displacement is 5.00 km (5000 m), the initial vertical velocity is 0 m/s (since the person is running horizontally off the cliff), and the acceleration due to gravity is -9.8 m/s² (negative because it acts in the opposite direction to the person's motion). We can quantify t as follows:
5000 = 0t + (1/2) × (-9.8) × t²
t² = (2 × 5000)/9.8
t = √((2 × 5000)/9.8) ≈ 101.04 seconds
To know more about Displacement, visit:
https://brainly.com/question/11934397
#SPJ1
Why do some photons travel right through the atom unchanged while others are absorbed?A) Only photons of specific frequencies can promote an electronic transition.B) Only visible light photons can interact with electrons.C) Only a few photons get deflected by the nucleus since it's only a tiny part of the atom's volume.D) Only negatively charged photons interact with atoms.
We are aware that electromagnetic radiation is governed by Maxwell's equations in electromagnetism. The EM wave equation can be derived from Maxwell's equations. 2Ex2 = 1c2Et2, and 2Et2 = 2Ex2.
Describe electromagnetic.
electromagnetic is defined as being of, relating to, or created by electromagnetism. Examples include a magnetic field due to electric current and electromagnetic.
The electromagnetic force is what?
The research of the electrostatic field is a component of the science of electromagnetism. It is a sort of particle-particle interaction that involves electrical charges The electromagnetic force, which combines magnetic and electrical forces, acts between charged particles.
To know more about electromagnetic visit:
https://brainly.com/question/17057080
#SPJ1
how to convert mpa to ksi
To convert MPa (megapascals) to ksi (kilopounds per square inch), you can use the following conversion factor: 1 MPa = 0.1450377377 ksi
The pascal is a small unit of pressure, so it is often used in combination with prefixes to express larger or smaller values. For example:
1 kPa (kilopascal) = 1000 Pa
1 MPa (megapascal) = 1,000,000 Pa
1 bar = 100,000 Pa
1 psi (pound per square inch) = 6,894.76 Pa
The pascal is used in a wide range of scientific and engineering applications, including fluid mechanics, atmospheric science, material science, and many others.
Therefore, to convert a value in MPa to ksi, you can multiply it by 0.1450377377. Here's the formula:
Value in ksi = Value in MPa x 0.1450377377
For example, if you have a pressure of 50 MPa, you can convert it to ksi as follows:
Value in ksi = 50 MPa x 0.1450377377 = 7.251886885 ksi
Therefore, 50 MPa is equal to 7.251886885 ksi (rounded to 9 decimal places).
To know more about kilopounds here
https://brainly.com/question/24545553
#SPJ4