Heat is transferred steadily through a 0.2 m thick 8 mx4 m wall at a rate of 2.4 kW. The inner and outer surface temperatures of the wall are measured to be 15 °C and 5 °C. The average thermal conductivity of the wall is w a. 0.002 m. W/m°C b. 0.75 m. W/m°C C. 1.0 m. W/m°C d. 1.5 m. W/m°C

Answers

Answer 1

The average thermal conductivity of the wall is 1.0 W/m°C (option C).

Explanation:

To find the thermal conductivity (k), use the formula: Q = kAΔT/d, where Q is the heat transfer rate, A is the area, ΔT is the temperature difference, and d is the thickness.

Where Q is the heat transfer rate, k is the thermal conductivity, A is the area of the wall, T1 is the temperature of the inner surface, T2 is the temperature of the outer surface, and L is the thickness of the wall.


Step 1: Identify the given values:
Q = 2.4 kW (convert to W: 2.4 x 1000 = 2400 W)
A = 8 m x 4 m = 32 m²
ΔT = 15 °C - 5 °C = 10 °C
d = 0.2 m

Step 2: Rearrange the formula to solve for k:
k = Qd / (AΔT)

Step 3: Plug in the values and calculate k:
k = (2400 W x 0.2 m) / (32 m² x 10 °C)
k = 480 / 320
k = 1.5 W/m°C

However, since the given answer choices do not include 1.5 W/m°C, it is assumed that there might be a typo in the question or the provided data. Given the available options, the closest answer is 1.0 W/m°C (option C).

Therefore, the average thermal conductivity of the wall is c) 1.0 m. W/m°C.

Know more about the thermal conductivity click here:

https://brainly.com/question/23897839

#SPJ11


Related Questions

The demand schedules for Jones, Smith, and other buyers are shown in the table below:
Draw the 4 demand curves for i) Jones ii) Smith iii) Other buyers and iv) All buyers.

Answers

The demand curve is the graphical representation of the relationship between the price of a good and the quantity demanded for a given period of time.

What is a demand schedule?

A demand schedule is a table which shows the quantity demanded of a good or service at different price levels.

A demand schedule can be graphed as a continuous demand curve on a chart where the Y-axis represents the price and the X-axis represents quantity.

Here, a typical representation, the price will appear on the left vertical axis, the quantity demanded on the horizontal axis.

Note that the complete information wasn't found and an overview was given.

Learn more about demand on:

https://brainly.com/question/1245771

#SPJ1

Waterbutt filtration system for pond. Water pressure principles, help needed?

I have water butt 1 and 2 working perfectly but as soon as I add another to the system water butt 1 and 2 start rising and overflowing.

Is there something I'm missing or doing wrong here? How does water leveling work?

Thanks all.

Answers

Water pressure principles is known to  state that the amount of Fluid pressure is said to be perpendicular to the surface on which it it exert or works on.

Note that  principle is shown by a vessel that is said to be having flat sides and has water. The pressure exerted by the weight of the water is therefore known to be perpendicular to the walls of the storage.

What is a Waterbutt used for?

A water butt is known to be a container that is made and also used to store a lot of rainwater.

Note that Water pressure principles is known to  state that the amount of Fluid pressure is said to be perpendicular to the surface on which it it exert or works on.

Learn more about Water pressure principles  from

https://brainly.com/question/14813457

#SPJ1

A +7.5% grade meets a horizontal grade on a section of a rural mountainous highway. If the length of the crest vertical curve formed in that section is 300 ft long, determine the safe operating speed on the highway.

Answers

Using the formula of comfort condition it is possible to determine the safe operating speed on the highway.

What is a deflection angle?

In physics, we define angular deviation as the angle resulting from the deflection of light when reflected from a prism. A prism has the ability to separate white light into several other colors, which are reflected by the object.

The comfort condition formula is given by: [tex]L=2(\frac{NV^{3} }{C} )^{\frac{1}{2} }[/tex]

Where, L is the length of the vertical curve, N is the grade, V is the safe speed operation and assuming the standart value for C (0,6 m/s3) it is possible to calculate:

[tex]C = 0,6 m/s^{3} = 1,968 ft/s^{3}\\ N= N1 - N2 = 7,5-0 = 7,5% = 0,075[/tex]

Changing the values in the formula:

[tex]L=2(\frac{NV^{3} }{C}){\frac{1}{2} } \\300 = 2(\frac{0,075.V^{3} }{1,968})^{\frac{1}{2} } \\V = 83,89 ft/s[/tex]

So, the safe operating speed on the highway is 83,89 ft/s.

See more about engineering at: brainly.com/question/12812715

#SPJ1

Consider fully developed flow in a circular pipe with negligible entrance effects. If the length of the pipe is doubled, the pressure drop will _____.

Answers

The answer is 6because I just took the test!

how skateboards works?

Answers

Answer

The skateboarder applies pressure to the trucks and gives/releases pressure on the levers. Second, the wheels and the axles are also examples of simple machines. They help the skater ride, spin, grind, and do a bunch of other radical movements on a skateboard.:

Explanation:

What frequency bands are used primarily for short range distances select all the nearby?

Answers

The frequency bands that are used primarily for short-range distances include the following:

The upper portion of the VHF band (225 MHz to 300 MHz).The lower portion of the UHF band (300 MHz to 400 MHz).

What is GSM?

GSM is an abbreviation for global system for mobile communication and it can be defined as an open and digital cellular network technology that is designed and developed to be used for the transmission of both mobile voice and data services at the same time.

In Computer technology and networking, the global system for mobile communication (GSM) is typically designed and developed to operates at the following bands of frequencies:

850 MHz900 MHz1800 MHz1900 MHz

In this context, we can infer and logically deduce that the frequency bands that are used primarily for short-range distances such as PAN, include the following:

The upper portion of the VHF band (225 MHz to 300 MHz).The lower portion of the UHF band (300 MHz to 400 MHz).

Read more on frequency bands here: https://brainly.com/question/19097094

#SPJ1

A 50-mm cube of the graphite fiber reinforced polymer matrix composite material is subjected to 125-kN uniformly distributed compressive force in the direction 2, which is perpendicular to the fiber direction (direction 1). The cube is constrained against expansion in direction 3. Determine:

a. changes in the 50-mm dimensions.
b. stresses required to provide constraints.

Answers

Answer:

hello some parts of your question is missing attached below is the missing part

answer :

A) Determine changes in the 50-mm dimensions

The changes are : 0.006mm compression  in y-direction

                               0.002 mm expansion in x and z directions

B) the stress required are evenly distributed

Explanation:

Given data :

50-mm cube of graphite fiber reinforced polymer matrix

subjected to 125-KN force in direction 2,

direction 2 is perpendicular to fiber direction ( direction 1 ) and cube is constrained against expansion in direction 3

A) Determine changes in the 50-mm dimensions

The changes are : 0.006mm compression  in y-direction

                               0.002 mm expansion in x and z directions

B) the stress required are evenly distributed

attached below is the detailed solution

Where is the primary area for romanesque architectural sculpture?

Answers

Answer:

on the façade, entrance, and column capitals

I have an AC waveform with the voltage peak value of 100 V. I'm trying to find the RMS value of the voltage​

Answers

Answer:

98 x 100=9,00

Explanation:

It is possible to design a reactor where the scy conductor and the nitrogen/ammonia electrode operate at different temperatures. Which combination of temperatures is expected to give the best results?.

Answers

The combination of temperatures that is expected to give the best result is option A: SCY temperature higher than electrode temp.

Why the case above?

The answer is option A because the proton conductivity of SCY is known to be one that often goes up along with increasing temperature, and the favorability of reaction goes down or reduces with total temperature.

Hence, It is said to be good for one to to keep the SCY conductor at a higher temperature and as such, The combination of temperatures that is expected to give the best result is option A: SCY temperature higher than electrode temp.

See options below

. Which combination of temperatures is expected to give the best results?

A.

SCY temperature higher than electrode temperature

B.

SCY temperature lower than electrode temperature

C.

SCY temperature the same as electrode temperature

D.

The temperature of the components does not make a difference.

Learn more about reactor from

https://brainly.com/question/15051406

#SPJ1

Explain any three ways research can facilitate the work of building technicians

Answers

According to the research, research can facilitate the work of building technicians in the conception, materials to use and planning of the project.

What are building technicians?

They are experts in construction projects, supporting the design of plans, estimating costs, planning work methods, etc.

Research can facilitate the work of building technicians in the following ways:

Conception, design and planning of the project.Selection of materials for floor, wall and ceiling systems.Carry out the programming of works, budgets and analysis of unit prices.

Therefore, we can conclude that according to the research, research can facilitate the work of building technicians in the conception, materials to use and planning of the project.

Learn more about construction projects here: https://brainly.com/question/17083292

#SPJ1

What are the top 4 solar inventions, how they are used, and how they are better than the original way of powering them

Answers

Yes I will answer soon

The need for extraction of raw metals for making steel has been reduced due to the?

Answers

Answer: Increase in minimills

Explanation:

An isolated pretimed signalized intersection has an approach with a traffic flow rate of 750 veh/h and a saturation flow rate of 3200 veh/h. This approach is allocated 32 seconds of effective green time. The cycle length is 100 seconds. Determine the average approach delay a) 4,6 s b) 30.2 s c) 34.8 s d) 35.0 s​

Answers

Answer: This approach is allocated 32 seconds of effective green time. The cycle length is 100 seconds. Determine the average approach delay (using Eq. 7.27). A) 34.8 s.

With _____, only one criterion must evaluate true in order for a record to be selected and with _____, all criteria must be evaluate true in order for a record to be selected.

a. parameter criteria, double criteria
b. function criteria, IF criteria
c. simple criteria, complex criteria
d. OR criteria, AND criteria

Answers

Answer:

d

Explanation:

OR criteria, AND criteria

In an OR criteria, it doesn't need all the records to be true. Just one record is enough and all other criterion becomes true.

In an AND criteria, it's unlike the OR criteria and works in opposite. It needs every member of the record to be true to be able to adjudge the whole record as true.

And as such, we have

With OR criteria, only one criterion must evaluate true in order for a record to be selected and with AND criteria, all criteria must be evaluate true in order for a record to be selected.

Check Your Understanding: True Stress and Stress A cylindrical specimen of a metal alloy 47.7 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 399 MPa causes the specimen to plastically elongate to a length of 54.4 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 47.7 mm to a length of 57.8 mm.

Answers

Answer:

The answer is "583.042533 MPa".

Explanation:

Solve the following for the real state strain 1:

[tex]\varepsilon_{T}=\In \frac{I_{il}}{I_{01}}[/tex]

Solve the following for the real stress and pressure for the stable.[tex]\sigma_{r1}=K(\varepsilon_{r1})^{n}[/tex]

[tex]K=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n}[/tex]

Solve the following for the true state stress and stress2.

[tex]\sigma_{r2}=K(\varepsilon_{r2})^n[/tex]

     [tex]=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n} \times [\In \frac{I_{i2}}{I_{02}}]^n\\\\=\frac{399 \ MPa}{[In \frac{54.4}{47.7}]^{0.2}} \times [In \frac{57.8}{47.7}]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.14046122)]^{0.2}} \times [In (1.21174004)]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.02663509)]} \times [In 1.03915873]\\\\=\frac{399 \ MPa}{0.0114161042} \times 0.0166818905\\\\= 399 \ MPa \times 1.46125948\\\\=583.042533\ \ MPa[/tex]

The driver of the truck has an acceleration of 0.4g as the truck passes over the top A of the hump in the road at constant speed. The radius of curvature of the road at the top of the hump is 98 m, and the center of mass G of the driver (considered a particle) is 2 m above the road. Calculate the speed v of the truck.

Answers

Answer:

19.81 m/s

Explanation:

The total acceleration of the truck (a) is due to the centripetal acceleration and as a result of the linear acceleration. Therefore the total acceleration (a) is given by:

[tex]a^2=a_n^2+a_t^2\\\\where\ a_n=centripetal\ acceleration=\frac{v^2}{r},a_t=linear \ acceleration\\\\But\ since\ the \ speed\ is \ constant, the \ linear \ acceleration(a_t)\ would\ be\ 0.\\\\a^2=a_n^2+a_t^2\\\\a^2=a_n^2\\\\a=a_n=\frac{v^2}{r} \\\\v^2=ar\\\\v=\sqrt{ar} \\\\a=0.4g=0.4*9.81,r=98\ m+2\ m=100\ m\\\\v=\sqrt{0.4*9.81*100} \\\\v=19.81\ m/s[/tex]

In order to live and grow, bacteria need moisture, food, the right temperature, and ______? Fill in the blank

Answers

Answer:

acidity, time,oxygen

Explanation:

These are some conditions for the growth of bacteria

Airtight plugs are installed in the ends of large sizes of PVC conduit during bending to_____________.

Answers

Airtight plugs are installed in the ends of large sizes of PVC conduit before bending to  A. prevent the conduit from collapsing when heated.

What is Airtight plugs?

Airtight plugs is necessary in the  PVC conduit so as to be able to avoid the collapse of conduit.

In this case, Airtight plugs are installed in the ends of large sizes of PVC conduit before bending to  A. prevent the conduit from collapsing when heated.

Learn more about Airtight plugs on:

https://brainly.com/question/20704252

#SPJ1

True or false? if i were to hook up an ac voltage source to a resistor, the voltage drop across the resistor would be in phase with the current in the circuit.

Answers

Answer: True

Explanation:

Lab scale tests performed on a cell broth with a viscosity of 5cP gave a specific cake resistance of 1 x1011 cm/g and a negligible medium resistance. The cake solids (dry basis) per volume of filtrate was 20 g/liter. It is desired to operate a larger rotary vacuum filter (diameter 8 m and length 12 m) at a vacuum pressure of 80 kPA with a cake formation time of 20 s and a cycle time of 60 s. Determine the filtration rate in volumes/hr expected for the rotary vacuum filter.

Answers

Answer:

5.118 m^3/hr

Explanation:

Given data:

viscosity of cell broth = 5cP

cake resistance = 1*1011 cm/g

dry basis per volume of filtrate = 20 g/liter

Diameter = 8m ,  Length = 12m

vacuum pressure = 80 kpa

cake formation time = 20 s

cycle time = 60 s

Determine the filtration rate in volumes/hr  expected fir the rotary vacuum filter

attached below is a detailed solution of the question

Hence The filtration rate in volumes/hr expected for the rotary vacuum filter

V' = ( [tex]\frac{60}{20}[/tex] ) * 1706.0670

   = 5118.201 liters  ≈ 5.118 m^3/hr

A group of students launches a model rocket in the vertical direction. Based on tracking data, they determine that the altitude of the rocket was 89.6 ft at the end of the powered portion of the flight and that the rocket landed 16.5 s later. The descent parachute failed to deploy so that the rocket fell freely to the ground after reaching its maximum altitude. Assume that g = 32.2 ft/s2.
Determine
(a) the speed v1 of the rocket at the end of powered flight,
(b) the maximum altitude reached by the rocket.

Answers

Answer:

[tex]u = 260.22m/s[/tex]

[tex]S_{max} = 1141.07ft[/tex]

Explanation:

Given

[tex]S_0 = 89.6ft[/tex] --- Initial altitude

[tex]S_{16.5} = 0ft[/tex] -- Altitude after 16.5 seconds

[tex]a = -g = -32.2ft/s^2[/tex] --- Acceleration (It is negative because it is an upward movement i.e. against gravity)

Solving (a): Final Speed of the rocket

To do this, we make use of:

[tex]S = ut + \frac{1}{2}at^2[/tex]

The final altitude after 16.5 seconds is represented as:

[tex]S_{16.5} = S_0 + ut + \frac{1}{2}at^2[/tex]

Substitute the following values:

[tex]S_0 = 89.6ft[/tex]       [tex]S_{16.5} = 0ft[/tex]     [tex]a = -g = -32.2ft/s^2[/tex]    and [tex]t = 16.5[/tex]

So, we have:

[tex]0 = 89.6 + u * 16.5 - \frac{1}{2} * 32.2 * 16.5^2[/tex]

[tex]0 = 89.6 + u * 16.5 - \frac{1}{2} * 8766.45[/tex]

[tex]0 = 89.6 + 16.5u- 4383.225[/tex]

Collect Like Terms

[tex]16.5u = -89.6 +4383.225[/tex]

[tex]16.5u = 4293.625[/tex]

Make u the subject

[tex]u = \frac{4293.625}{16.5}[/tex]

[tex]u = 260.21969697[/tex]

[tex]u = 260.22m/s[/tex]

Solving (b): The maximum height attained

First, we calculate the time taken to attain the maximum height.

Using:

[tex]v=u + at[/tex]

At the maximum height:

[tex]v =0[/tex] --- The final velocity

[tex]u = 260.22m/s[/tex]

[tex]a = -g = -32.2ft/s^2[/tex]

So, we have:

[tex]0 = 260.22 - 32.2t[/tex]

Collect Like Terms

[tex]32.2t = 260.22[/tex]

Make t the subject

[tex]t = \frac{260.22}{ 32.2}[/tex]

[tex]t = 8.08s[/tex]

The maximum height is then calculated as:

[tex]S_{max} = S_0 + ut + \frac{1}{2}at^2[/tex]

This gives:

[tex]S_{max} = 89.6 + 260.22 * 8.08 - \frac{1}{2} * 32.2 * 8.08^2[/tex]

[tex]S_{max} = 89.6 + 260.22 * 8.08 - \frac{1}{2} * 2102.22[/tex]

[tex]S_{max} = 89.6 + 260.22 * 8.08 - 1051.11[/tex]

[tex]S_{max} = 1141.0676[/tex]

[tex]S_{max} = 1141.07ft[/tex]

Hence, the maximum height is 1141.07ft

For some alloy, the yield stress is 345-MPa (50,000-psi) and the elastic modulus (E) is 103-GPa (15x106 psi). What is the maximum load that may be applied to a specimen with a cross-sectional area of 130-mm2 (0.2-in2) without plastic deformation

Answers

The maximum load that may be applied to a specimen with a cross-sectional area of 130 mm² is; 35535 N

How to find Elastic Modulus?

We are told that for an alloy, the yield stress is 345-MPa and the elastic modulus (E) is 103-GPa.

Now, we want to find the maximum load that may be applied to a specimen with a cross-sectional area of 130-mm² without plastic deformation. Thus;

We are given the parameters;

Yield Stress; σ = 345 Mpa = 345 * 10⁶ Pa

Elastic Modulus; E = 103 GPa = 103 * 10⁹ Pa

Cross sectional Area; A = 130 mm² = 103 * 10⁻⁶ m²

Formula for stress without Plastic deformation is;

σ = F_max/Area

where;

σ is stress

F_max is maximum force

Area is Area

Thus making maximum force the subject of the formula gives;

F_max = σ * A

Plugging in the relevant values for stress and area gives us;

F_max = 345 * 10⁶ * 103 * 10⁻⁶

F_max = 35535 N

The maximum load that may be applied to a specimen with a cross-sectional area of 130 mm² is gotten to be 35535 N

Read more about Elastic Modulus at; https://brainly.com/question/6864866

#SPJ1

3) Explain how dc machines Can work as motor and generator​

Answers

The working principle of a DC machine is when electric current flows through a coil within a magnetic field, and then the magnetic force generates a torque that rotates the dc motor. The DC machines are classified into two types such as DC generator as well as DC motor.

what is the distance in term of wavelengh between successive minima in the standing wave ratio​

Answers

Answer:

hi there

Explanation:

A centrifugal pump levers water
to a boiter at the rate of 0.05mls
pressure rises across the
is 7 bar, the suction pipe 100m
I'm diameter, and delivering pipe
the
ритр
is 15mm diameter, the outlet
being 0.5m above the intet.
Calculate the efficiency of
the pump
the
kipe, it
power delivered to
the driving shaft is 45 kWatt

Answers

Answer:

Industrial users can select from numerous pump technologies for water supply and the handling of other liquid media. A particular favorite is the centrifugal pump. How do centrifugal pumps work? What different delivery principles are there? For which applications are centrifugal pumps especially well-suited?

Here we provide you an overview of the different types of centrifugal pumps. In addition, the operating principles are explained, and typical applications are listed also.

Explanation:

The high-pressure fuel pumps used in gasoline direct-injection (GDI) systems are powered by ________.

Answers

Answer:

Camshaft

Explanation:

An example of a power consuming device would be a(n) ____ while an example of a non-power consuming device would be a(n) ____.

Answers

An example of a power consuming device would be a(n) light bulb, a computer device while an example of a non-power consuming device would be a(n) switch or button.

What is power consumption?

The quantity of energy utilized per unit of time is known as power consumption. Power use is a significant factor in digital systems.

Power consumption is a limiting factor for the battery life of portable devices like laptop computers and cell phones.

Learn more about power consumption:
https://brainly.com/question/14860418
#SPJ1

How are new slip rings attached to the rotor core during alternator rebuilding?

Answers

The new slip rings is been  attached to the rotor core during alternator rebuilding by b. Soldered on.

What Soldering ?

Soldering serves as the way of joining  different types of metals together by melting solder.

This is been used on new slip rings to get it  attached to the rotor core during alternator rebuilding .

Learn more about Soldering on:

https://brainly.com/question/25759088

#SPJ1

CHECK THE COMPLETE QUESTION BELOW:

How are new slip rings attached to the rotor core during alternator rebuilding?

a. Machine clamped

b. Soldered on

c. Crimped on

d. epoxy glue

different lever designs can be engineered to alter the brake pedal effort required of the driver by using different levels of ?

Answers

Different lever designs can be engineered and developed to alter the brake pedal effort required of the driver by using different levels of mechanical advantage.

What is mechanical advantage?

Mechanical advantage can be defined as a ratio of the output force of a lever to the force acting on it (input force or effort), assuming no losses due to wear, flexibility, tear or friction.

This ultimately implies that, different lever designs can be suitably engineered and developed to alter the brake pedal effort (input force) that is required of the driver, especially by using different levels of mechanical advantage.

Read more on mechanical advantage here: https://brainly.com/question/18345299

#SPJ1

Other Questions
How do the speaker's feelings throughout the poem support the theme or message? Solve the following initial value problem. dr/d theta = -pi sin pi theta, r(2) = 2 r = (Type an exact answer, using pi as needed.) Kit made contributions to a Roth IRA over the course of 30 working years. His contributions averaged $4,000 annually. Kit was in the 24% tax bracket during his working years. The average annual rate of return on the account was 6%. Upon retirement, Kit stopped working and making Roth IRA contributions. Instead, he started living on withdrawals from the retirement account. At this point, Kit dropped into the 15% tax bracket. Factoring in taxes, what is the effective value of Kit's Roth IRA at retirement? Assume annual compounding. (3 points)a $287,432. 74b $305,432. 74c $240,336. 88d $298,232. 74 Match each narrative technique to its definition.Match Term DefinitionPacing A) Where the writing is organized and set around the internal thoughts of the narratorForeshadowing B) The view, or opinion, or a text and its elements, as created by a writerStream of consciousness C) The use of short sentences to help speed up and allow the reader to feel unsettledJuxtaposition D) A technique to suggest or show something that happens in the futurePerspective E) The writer places two descriptions, ideas, characters, actions, or events side by side in a text Mei-Mei, the main character from certain excerpts of Amy Tan's novel, The Joy Luck Clubexperiences many changes throughout her life. These include, since about the 1970s, it appears that self-esteem in the u.s. has been ____. complete the sentences describing the male urethra. then arrange the sentences in order, following the flow of urine through the urethra.The ___ urethra is a short segment that passes through a reproductive organ. It receives secretions from two ejaculatory ducts.The ___ urethra passes through the pelvic floor.The ___ urethra is the longest part of the male urethra.Urine exits the urethra via the ___a. external urethral orifice.b. prostatic c. membranousd. penile 1.) Using tne line arawing tooi, depict the etect of a drougnt in idano on the market tor trencn tnes. Draw either Market for French Fries a shift in the supply curve or the demand curve for french fries. Label your curve 2.) Using the point drawing tool, depict the new equilibrium price and quantity. Label your point 'A Carefully follow the instructions above and only draw the required objects. An appendectomy is an operation to have your appendix removed. People who need an appendectomy will pay any price for the operation. Suppose that the demand curve for appendectomies is vertical. There is a technological breakthrough that allows surgeons to perform appendectomies at a much lower cost. 1.) Using the line drawing tool, depict the effect of the technological breakthrough on the market for appendectomies. Draw either a shift in the supply curve or the demand curve for appendectomies. Label your P(S) curve 2.) Using the point drawing tool, depict the new equilibrium price and quantity. Label your point 'A Carefully follow the instructions above and only draw the required objects. Which of the following conditions is the presence of outpouches off the gut? a. diverticulosis b. diaphragmatocele c. polyposis suppose the exchange rate was 104 yen per dollar in 2017 and 110 yen per dollar in 2018. the dollar (click to select) in value and the yen (click to select) in value. today's ecological anthropology, also known as environmental anthropology, attempts not only to understand but also to____ true/false: currency futures are usually customized contracts which are negotiated between mnc's and banks What is the probability that either event will occur?Now, find the probability of event A and event B.AB662020P(A and B) = [?]Enter as a decimal rounded to the nearest hundredth.Enter Which dilemma is evident in the difficulties that arise in enticing individuals who may benefit from an interest group's work to provide financial support for that organization?a. coordination problemb. prisoner's dilemmac. principal-agent problemd. unstable coalitione. collective-action problem Any useful policy and mechanism must balance the benefits of the protection agains the cost of designing, implementing, and using the mechanism.T/F T/F As the Great Depression destroyed capitalist economies, international cooperation broke down and governments turned to their own resources and practiced economic nationalism. FILL IN THE BLANK. One way to access library information is through a ____ library, which is a Web site that provides online access to library information services.A. UNESCOB. brick and mortarC. virtualD. private Which emotional term is defined as a person's immediate, physiological response to a stimulus?a. Emotion b. Affect c. Happiness d. Mood A photon with enough energy, 5.1 electron volts (eV) of energy -to be precise, will eject an electron from a piece of gold! What frequency and wavelength does light with this energy have? Note: 1eV = 1.60 10-19 joules Record the electronic funds transfer of $200 made to a creditor. 2.Record the return of the customer check of $100 due to insufficient funds. 3.Record the service charges of $25 deducted by the bank.