less than 20 Hz
The frequency of subsonic sound is less than 20 Hz
subsonic sound refers to a sound which has a wave that travels slower than the speed of sound.
frequency of audible sound: 20 Hz to 20,000 HzThus subsonic sound < 20 Hz
Answer:
less than 20Hz
Explanation:
Human ears can hear sounds coming in range of 20Hz to 20000Hz or 20kHz.Low or beneath is not audible.Bats can hear below 20Hz ,so they use this to travel in air
If a 2.00 kg ball is thrown straight up world and its maximum height is 25.51 m. Approximately how much potential energy (PE) dose the ball possess when it reaches it’s maximum height (g=9.8 m/s^2)
Answer:
500
Explanation:
im not sure if this is right but if its not im very sorry and i hope you have a great day or night wherever you are
An electromagnetic radio wave is received by a transmitter before it is converted to a sound wave. The radio wave has a wavelength of 23,076 m and a frequency of 13,000 Hz. What velocity is the wave traveling at before the transmitter converts it to a sound wave? 1. 76 m/s 0. 56 m/s 3. 31 × 102 m/s 3. 00 × 108 m/s.
The velocity the wave was traveling at before the transmitter converts it to a sound wave is 3.0 x 10⁸ m/s.
What is Velocity of waves?The velocity of waves is the rate of change of the wave's displacement with time.
The velocity of waves is determined by taking the product of the wave's frequency and wavelength.
v = fλ
v = 13,000 x 23,076
v = 3.0 x 10⁸ m/s.
Thus, the velocity the wave was traveling at before the transmitter converts it to a sound wave is 3.0 x 10⁸ m/s.
Learn more about velocity of waves here: brainly.com/question/13867834
How to know if two vectors are linearly independent
Answer:
Given a set of vectors, you can determine if they are linearly independent by writing the vectors as the columns of the matrix A, and solving Ax = 0.
Explanation:
You may verify if a group of vectors is linearly independent by expressing the vectors as columns of the matrix A and solving Ax = 0.
What is a vector?A vector is a quantity or phenomena with magnitude and direction that are independent of one another. The phrase also refers to a quantity's mathematical or geometrical representation.
If no vector can be written as a linear combination of the others, a set of vectors is said to be linearly independent.
If no vector in a collection of vectors can be written as a linear combination of the ones mentioned before it, the set is said to be linearly independent.
A nontrivial linear combination yields the zero vector, the vectors are said to be dependent.
You may verify if a group of vectors is linearly independent by expressing the vectors as columns of the matrix A and solving Ax = 0.
To learn more about the vector refer to the link;
https://brainly.com/question/13322477
#SPJ4
What is the definition of the word PER?
Answer:
Per is a Latin preposition that means "through" or "by means of". Per (pronounced like "purr") is also an English preposition that can mean "for each", "to each", "by means of", or [lastly, annoyingly] "in accordance with"; somewhat interchangeably with the [even more annoying] "as per". In the example expressions here, it conveys "because of the rationale presented at/by".
Answer:
(Entry 1 of 4) 1 : by the means or agency of : through per bearer. 2 : with respect to every member of a specified group : for each. 3 : according to —often used with as per instructionsas per usual.
Explanation:
Suppose that a simple pendulum consists of a small 60.0 g bob at the end of a cord of negligible mass. If the angle 0 between the cord and the vertical is given by g - (0.0800 rad) cos[(4.43 rad/s) t 0], what are (u) the pendulum's length and (b) its maximum kinetic energy
Based on the mass of the bob and the angle between the cord and the vertical, the pendulum length is 0.50m.
The maximum kinetic energy can be found to be 9.42 x 10⁻⁴J.
What is the pendulum length?This can be found as:
= g-force / w²
Solving gives:
= 9.8 / 4.43²
= 0.4998 m
= 0.50 m
What is the maximum kinetic energy?This can be found as:
= 0.5 × m × w² × A²
Maximum kinetic energy is:
= 0.5 × 60 × 10⁻³ × (4.43 × 0.4998 x 0.08 rad)²
= 9.42 x 10⁻⁴J
Find out more on maximum kinetic energy at https://brainly.com/question/24690095.
What does a 'dead' battery mean chemically? a) q > 1 b) q < 1 c) q = 1 d) q = k e) q/k = 0
Answer:
d) q=k
Explanation:
When a battery is "dead" it means that the chemical components are at equilibrium. When that occurs,
Δ
G
= 0, and Q = K.
A 'dead' battery mean chemically Q=1. At this position, the battery is at equilibrium condition, and considered as dead.
What is dead battery?Dead battery is the battery in which no flow of electron take place as there is no potential difference.
Chemically, the battery is considered as dead battery, when there is no chemical process happens in battery.
Q is a reaction quotient of Nernst Equation for a battery.At the equilibrium condition, the value of Q is to become equal to 1. At this condition, the battery is considered as dead.Thus, a 'dead' battery mean chemically Q=1. At this position, the battery is at equilibrium condition, and considered as dead.
Lean more about the dead battery here;
https://brainly.com/question/15718534
#SPJ4
if i were to (HYPOTHETICALLY) punt a small child off of a building, (HYPOTHETICALLY) how long would it take for the (VERY HYPOTHETICAL) child to reach maximum velocity?
(HYPOTHETICALLY) the child would weigh 88 pounds, have blond hair and blue eyes, and (HYPOTHETICALLY) be named "Jacob."
THIS QUESTION IS HYPOTHETICAL AND I AM TOTALLY NOT PLANNING TO COMMIT AN ATROCITY!
Answer:
Around 190-ish miles per hour when it hit the ground maybe
Explanation:
Use F = 1/T as your basis:
9. Find the frequency of a tuning fork that takes 2.50×10−3s to complete one oscillation.
The answer is 400 Hz but please show your work.
Now
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5\times 10^{-3}}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.4\times 10^{3}[/tex]
[tex]\\ \rm\rightarrowtail \nu=400Hz[/tex]
The frequency for this time will be 400 Hz.
What is the frequency?Frequency is defined as the ratio of the number of waves to time. It is denoted by f.
f=[tex]\frac{1}{T}[/tex] where,
f is the frequency and,
T is the time period.
SI unit of frequency is Hz.
There are different types of frequency in sound :
Infrasonic-The frequency is less than 20 Hz.Audible-The frequency is between 20Hz to 20,000 Hz.Ultrasonic-The frequency is greater than 20,000 Hz.According to the question :
Given :
T= 2.50×[tex]10^{-3}[/tex]
f=[tex]\frac{1}{T}[/tex]
⇒f=1/(2.50×[tex]10^{-3}[/tex])
⇒400 Hz
Hence, the frequency for this time will be 400 Hz.
For more information about frequency :
https://brainly.com/question/5102661
#SPJ2
A proton wit a kinetic energy of 9. 3 x 10^-15 j moves perpendicular to a magnetic field of 0. 87 t. What is the radius of its circular path?
The radius of the given circular path moved by the proton which is perpendicular to a magnetic field of 0.87 T determined as 4 cm.
Magnetic force of the protonThe magnitude of the magnetic force on the proton is determined using the following formula;
F = qvBsin(θ)
Centripetal force on the protonThe centripetal force of the circular path is given as;
F = mv²/r
Solve the two equations together,
[tex]\frac{mv^2}{r} = qvBsin(90)\\\\r = \frac{mv}{qB}[/tex]
Where;
v is the speed of the protonSpeed of the protonThe speed of the proton is determined from its kinetic energy;
[tex]K.E = \frac{1}{2}mv^2\\\\ v= \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2 \times 9.3 \times 10^{-15}}{1.67 \times 10^{-27}} } \\\\v = 3.33\times 10^6 \ m/s[/tex]
Radius of the circular pathThe radius of the circular path is calculated as follows;
[tex]r = \frac{(1.67 \times 10^{-27}) \times (3.33 \times 10^6)}{(1.6\times 10^{-19}) \times (0.87)} \\\\r = 0.04\ m\\\\r = 4 \ cm[/tex]
Learn more about magnetic force here: https://brainly.com/question/13277365
1. Why don't you see your reflection in a building made of rough, white stone?
Both Transverse and Longitudinal Waves transmit____and not_____
A power, work
B work, power
C energy, matter
D matter, energy
Explanation:
How are animals similar? All animals are made of many cells. Most animals can move on their own. Like all living things, animals grow, change, reproduce, and respond to their environment.
I have an answer but I'm not it sure about it. I just need someone to help confirm it. Thanks
Answer:
0.40s. He's dead, Jim.
Explanation:
The block accelerates at a rate of [tex]9.81 ms^-^2[/tex]. The moment it's 14 meters from the ground, it has traveled 39 meters, in about [tex]39=\frac12(9.81)t^2 \rightarrow 2.82 s[/tex].
For the man to dodge, the time left is the distance the block takes to go down to 2 meters from ground, or 51 meters from its starting point. Which translates in [tex]51=\frac12(9.81)t^2\rightarrow 3.22s[/tex]
He has thus less than half a second ([tex]0.40s[/tex] to be exact) to dodge.
A car is traveling in a race. The car went from the initial velocity of 35 m/s to the final velocity of 65 m/s in 5 seconds
What is the acceleration?
- 13 m/s
-6m/s
6 m/s
13 m/s
Answer:
C
Explanation:
65-35 = 30
30 divided by 5 = 6
The answer will be 6 m/s
Explanation:
c............ ......
...
more than one option this is hard
How do scientists know that seafloor spreading occurs?Explain how this spreading causes the continents to seperate.
A 1.2-kg hot iron sphere with heat capacity
576 J °C-1 is cooled by immersing it in a tank of
water (Fig g). (See the photo that I uploaded)The mass of the water is 3 kg and
its initial temperature is 12 °C. After 5 minutes,
both the iron sphere and the water reach a final
temperature of 15 °C.
(a) Find the energy gained by the water.
(b) Find the average rate of energy transfer from
the iron sphere to the water.
(c) What is the initial temperature of the iron
sphere?
Given the data from the question, the heat gained by the water, the rate of energy transfer and the initial temperature of the iron are:
A. The energy gained by the water is 37656 J
B. The average rate of energy transfer from
the iron sphere to the water is 125.52 J/s (Watts)
C. The initial temperature of the iron
sphere is 65.4° C
A. How to determine the heat gained Mass of water (M) = 3 Kg = 3 × 1000 = 3000 gInitial temperature (T₁) = 12 °C Final temperature (T₂) = 15 °Change in temperature (ΔT) = 15 – 12 = 3 °C Specific heat capacity (C) = 4.184 J/gºC Heat (Q) =?Q = MCΔT
Q = 3000 × 4.184 × 3
Q = 37656 J
B. How to determine the rate of energy transfer Heat (Q) = 37656 JTime (t) = 5 min = 5 × 60 = 300 sPower (P) =?Power = energy / time
Power = 37656 / 300
Power = 125.52 J/s (Watts)
C. How to determine the initial temperature of the iron Mass of iron (M) = 1.2 Kg = 1.2 × 1000 = 1200 gHeat capacity (C) = 576 J/ºC Heat (Q) = 37656 JTemperature (T) =?Q = CT
37656 = 576 × T
Divide both side by 576
T = 37656 / 576
T = 65.4° C
Learn more about heat transfer:
https://brainly.com/question/10286596
Which is the surest test of charge on a body?
(a) Repulsion
(b) Lightning
(c) Combustion
(d) Insulation
Answer:
Repulsion
Explanation:
Unlike attraction of magnets opposite polls
Repulsion happens between same polesLike if you put north pole to north poll they get repulsed .Same with south polesAnswer:
Repulsion
Explanation:
Brainliest MisterBrainly
[tex]\red{ \rule{0pt}{900000pt}}[/tex]
write comparison between Electrical Circuit and Magnetic Circuit.
[tex] \\ \\ \\ \\ \\ \\ \\ [/tex]
Thanks¡!¡:)
Magnetic circuit, closed path to which a magnetic field, represented as lines of magnetic flux, is confined.
In contrast to an electric circuit through which electric charge flows, nothing actually flows in a magnetic circuit.
Explanation:
Hope it helps you (`▿▿▿▿´ƪ)
A student wants to make a scientific explanation regarding the wave model of electromagnetic radiation. Which of the following would be part of the scientific explanation?(1 point)
claims
opinions
historical events
procedures
Answer:
Explanation:
I can say claims
Electromagnetic radiation are a group of waves which are are produced by the vibrations of electromagnetic fields.
What is electromagnetic waves?Electromagnetic radiation are a group of waves which are are produced by the vibrations of electromagnetic fields. Electromagnetic waves/radiation possess the ability to travel through vacuum (i.e. they do not require a material medium for their propagation) while also carrying radiant energy.
Electromagnetic fields which are the sources of electromagnetic radiation, exist as a result of the combination and interaction of travelling electric and magnetic field forces.
Electromagnetic radiations consists of the following waves: radio waves, infrared waves, visible light, ultraviolet rays, X-rays, and gamma rays.
These waves have differing and unique properties such as wavelength, frequencies, ionizing properties, penetrating ability, sources as well as well as uses. However, they have a common property of velocity- they travel with the speed of light, 3.0 * 10⁸ m/s.
In addition to having the same velocity, all electromagnetic radiation exhibit interference and diffraction.
To know more about electromagnetic waves follow
https://brainly.com/question/25847009
Which image corresponds to what moment in time? (1 point) The low-pitched sound corresponds to the sound source getting closer, its wavelength is longer. The high-pitched sound corresponds to the sound source moving away, its wavelength is shorter. The low-pitched sound corresponds to the sound source moving away; its wavelength is shorter. The high-pitched sound corresponds to the sound source getting closer; its wavelength is longer. The low-pitched sound corresponds to the sound source getting closer, its wavelength is shorter. The high-pitched sound corresponds to the sound source moving away, its wavelength is longer. The low-pitched sound corresponds to the sound source moving away, its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer, its wavelength is shorter.
Answer:
The low-pitched sound corresponds to the sound source moving away; its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer; its wavelength is shorter.
Just took the quiz, and it said this answer was correct.
In this picture, The low-pitched sound corresponds to the sound source moving away; its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer; its wavelength is shorter.
What is wave ?Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.
Wavelength is the distance between two points on the wave which are in same phase. Phase is the position of a wave at a point at time t on a waveform.
There are two types of the wave longitudinal wave and transverse wave.
Longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave. Sound wave is a longitudinal wave.
Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave. Light wave is a Transverse wave.
According to the Doppler's effect, a sound source moves away from the observer its wavelength increases and when it moves towards the observer the wavelength decreases.
To know more about Doppler's effect :
https://brainly.com/question/15318474
#SPJ2.
Help please. Will give brainliest
Answer:
Your answer would be:
B.) Both carry energy in the form of vibration
Explanation:
Have a great rest of your day
#TheWizzer
Which is NOT a characteristic of
the temperate region?
A. a lot of organic matter
B. moderate temperatures
C. moderate rainfall
D. under-developed soil horizons
Answer:
under developed soil horizons
A dense mix of dry, hot rock fragments and hot gas erupting from volcanic vents at high speed is pyroclastic flow. lahar. fumarole. tephra.
Magma is called for the dense mix of dry hot rock fragments and hot gas erupting from volcanic vent at high speed.
What is magma?Magma is the extremely hot liquid and flows under the surface of the earth. When this liquid comes out to the surface of earth, then called as lava.
Gas bubble, making up to lave are energetic in nature, because they keep on expanding in all directions, they will go all out to the only open are of a volcano, the vent, in an upward direction.
Hence Magma is called for the dense mix of dry hot rock fragments and hot gas erupting from volcanic vent at high speed.
To know more about magma follow
https://brainly.com/question/23661578
Using the model above, which letter represents the position of the earth when the northern hemisphere is experiencing the shortest hours of daylight
A
B
C
D
Answer:
At position "B" the northern hemisphere is tilted the most from the earth-sun direction and will experience the shortest hours of daylight, (and also the most indirect sun rays).
A book on a shelf 2.5 m above the floor has a mass of 1.7 kg. What is the gravitational potential energy of the book?
Answer:
42.5J (If g = 10)
41.6925J (If g = 9.81)
41.67975J (If g = 9.807)
Explanation:
Gravitational Potential Energy = Mass X Height X Gravitaitonal Field
Earth's Gravity is = 9.807 m/s^2
It is often rounded to 9.81 or 10
A rock with a 8 kg mass is tied to a string and swung in a circular path. The 1.8 meter string is tied to a post, and during the motion, the string has a 35° angle with the post. The rock makes 100 rounds in 3 minute. The centripetal force on the ball is __ N.
The centripetal force of the rock tied to a string and swung in a circular path is determined as 1.65 N.
Angular speed of the rock
The angular speed of the rock is calculated as follows;
ω = 2π N
[tex]\omega = 35^0 \times \frac{2 \pi \ rad}{360^0} \times \frac{100}{3\min} \times \frac{1 \min}{60 \ s} \\\\\omega = 0.339 \ rad/s[/tex]
Centripetal force of the rockThe centripetal force of the rock is calculated from the product of mass and centripetal acceleration as shown below;
Fc = ma
Fc = m(ω²r)
Fc = mω²r
Fc = 8 x (0.339)² x 1.8
Fc = 1.65 N
Thus, the centripetal force of the rock tied to a string and swung in a circular path is determined as 1.65 N.
Learn more about centripetal force here: https://brainly.com/question/20905151
Two objects of the same mass travel in the same direction along a horizontal surface. Object X
has a speed of 5 ms
and object Y
has a speed of 2 ms
, as shown in the figure. After a period of time, object X
collides with object Y
.
Consider the situation in which the objects collide but do not stick together. Which of the following predictions is true about the center of mass of the two-object system immediately after the collision?
After the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.
Elastic collision of the two objectsWhen the two objects collide but do not stick together, the type of collision is elastic collision.
In elastic collision, both momentum and kinetic energy are conserved.
Final velocity of the two objects after collsionmu₁ + mu₂ = mv₁ + mv₂
5m + 2m = mv₁ + mv₂
m(5 + 2) = m(v₁ + v₂)
7 = v₁ + v₂ -------- (1)
Apply the concept of one direction velocity;
u₁ + v₁ = u₂ + v₂
5 + v₁ = 2 + v₂
v₂ = v₁ + 3 ------ (2)
Solve (1) and (2) together;
7 = v₁ + v₁ + 3
4 = 2v₁
v₁ = 2 m/s
v₂ = 2 + 3 = 5 m/s
Thus, after the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.
Learn more about elastic collision here: https://brainly.com/question/7694106
A body of mass 0.1 kg falling freely under gravity takes 10 s to reach the ground. Calculate the kinetic energy and potential energy of the body when it has travelled for first 6 s. Given, g = 9.8 m/ s²
Answer: KE = 172.872 J
PE = 307.328 J
Explanation:
For KE: acceleration = change in velocity / time → 9.8 = final velocity - 0 (because initial velocity is zero) / 6s → final velocity after 6s = 58.8 m/s.
Now, plug this into: KE = 1/2(m)(v^2) → KE = 1/2(.1)(58.8^2) = 172.872 J.
For PE: Find the velocity after 10 s: acceleration = change in velocity / time → 9.8 = final velocity - 0 (because initial velocity is zero) / 10s → final velocity after 10s = 98 m/s.
Now, find the total height: (v final)^2 = (v initial)^2 + 2*a*d → 98^2 = 0^2 + 2*9.8*d → d = total height = 490 m.
Now, find the change in height after 6 s: (v final)^2 = (v initial)^2 + 2*a*d → 58.8^2 = 0^2 + 2*9.8*d → d = change in height after 6 s → 176.4 m
Now, subtract the change in height from the total height to get its height after 6s: 490-176.4=313.6m
PE = m*g*h → Pe=.1*9.8*313.6 = 307.328 J :)
the earth exerts a gravitational force of 850N on John. What is Johns mass in kg
Answer:
86.73 kg
Explanation:
Remember that F=mg
Let's plugin our numbers
850N=m9.8m/s^2
850N=9.8m/s^2m
86.73=m
a wind turbine is an example of what kind of device
a. a generator
b. a transformer
c. a motor
d. an electromagnet
Answer:
it’s an example of a generator.
Explanation:
Answer:
Generator
Explanation:
valid