Answer: The values you provided show that as the current (measured in amps) and voltage (measured in volts) increase, the resistance (measured in ohms) remains relatively constant.
Looking at the values, it appears that the current (in amps) divided by the voltage (in volts) yields resistance values (in ohms) that are relatively close to each other. The calculated resistance values range from approximately 27 ohms to 33 ohms, with some variation in between.
hydrogen bonds between the orange and red strands are not shown but are implied by the model. t/f
"hydrogen bonds between the orange and red strands are not shown but are implied by the model" - True
What is hydrogen bonds?When a hydrogen atom bound to a highly electronegative atom is present close to another electronegative atom with a single pair of electrons, a hydrogen bond forms between the two molecules. This unique sort of dipole-dipole attraction is known as a hydrogen bond. Between molecules, there are intermolecular forces.
The unequal distribution of the electron between a hydrogen atom and a negatively charged atom is the source of hydrogen bonding. While a stable electron pair requires two electrons, hydrogen in a bond still only has one electron.
Thus, the given statement is true.
To know more about hydrogen bonds refer to:
https://brainly.com/question/1426421
#SPJ4
An analyst prepared a sucrose solution by weighing 1kg of water and add 1.5kg of sucrose. what is the concentration of the resultant solution in mass percent
The concentration of solution in mass percent is 60%.
What is mass percentage?Mass percentage refer to the percentage of solute present in solution.
The concentration of substance can be expressed in mass percent.
So, we can write,
Mass percent = mass of solute / mass of solution x 100.
Mass of solution = mass of solute + solvent.
Here, sucrose is the solute and water is solvent.
Mass of solute is 1.5Kg and mass of solvent is 1Kg.
Mass of solution = 1.5 + 1 = 2.5 Kg.
Mass percent = 1.5/2.5x100
So, Concentration of solution in mass percent = 60%.
For a detailed study of mass percent refer the given link https://brainly.com/question/13896694.
#SPJ1.
C3H8 (g) + 5 O2 (g) → 3 CO2 (g) + 4 H2O (g) Which atoms are being oxidized and which are being reduced?
C₃H₈ (g) + 5 O₂ (g) → 3 CO₂ (g) + 4 H₂O oxygen atoms are being oxidized and propane are being reduced.
What is redox reaction ?The term redox reaction is defined as when oxidation and reduction takes place simultaneously.
The loss of electron is called as oxidation, it increases the oxidation state. The gain of electron is called as reduction, it decreases the oxidation state.
The oxidation state of the oxygen is decreased hence it gets reduced while that of propane oxidation state is increased hence it gets oxidized.
Thus, C₃H₈ (g) + 5 O₂ (g) → 3 CO₂ (g) + 4 H₂O oxygen atoms are being oxidized and propane are being reduced.
To learn more about redox reaction, follow the link;
https://brainly.com/question/13293425
#SPJ1
At 1755 oC the equilibrium constant for the reaction: 2 IBr(g) I2(g) + Br2(g) is KP = 0.748. If the initial pressure of IBr is 0.00465 atm, what are the equilibrium partial pressures of IBr, I2, and Br2? p(IBr) = . p(I2) = . p(Br2) = .
From the calculation, the equilibrium partial pressure of IBr is 6.5 * 10^-4 atm while that of I2 and Br2 is 0.002 atm.
What is the equilibrium pressure?We must set up the ICE table as shown hence;
2 IBr(g) < ------> I2(g) + Br2(g)
I 0.00465 0 0
C - 2x + x + x
E 0.00465 - 2x + x + x
Kp = pI2. pBr2/pIBr^2
pI2 = pBr2 = x
0.748 = x^2/ 0.00465 - 2x
0.748 (0.00465 - 2x) = x^2
3.5 * 10^-3 - 1.496x = x^2
x^2 + 1.496x - 3.5 * 10^-3 = 0
x=0.002 atm
Hence;
For IBr = 0.00465 - 2(0.002) = 6.5 * 10^-4 atm
For I2 and Br2 = 0.002 atm
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
Chemistry A (SA) # 3606 / Module 6: Covalent Compounds
1. Ionic compounds and polar molecules can both dissolve in water. Which statement correctly describes what will occur when they dissolve?
Neither the ionic compound nor the polar molecule will dissociate in water.
Both the ionic compound and the polar molecule will dissociate in water.
The ionic compound will dissociate, but the polar molecule will not.
The polar molecule will dissociate, but the ionic compound will not.
Ionic compounds dissolve readily in water because the polar water molecules are able to interact and stabilize the charged ions.
How can water dissolve ionic compounds?Polar solvents, particularly water, help ionic molecules dissolve. This happens when the negative anion of the ionic solid is drawn to the positive end of the water molecule and the positive cation of the ionic solid is drawn to the negative end of the water molecule (oxygen) (hydrogen). An ionic substance separates into positive and negative ions during dissolution. For these ions to remain distinct and soluble in the solution, they need to interact with other charges. If the covalent bonds are a component of a polyatomic ion, a molecule can contain both ionic and covalent bonds. Ammonium ions, NH4+, sulphate ions, SO42-, hypochlorite ions, and ClO- are a few examples of polyatomic ions.To learn more about ionic compounds refer to:
https://brainly.com/question/18246121
#SPJ1
liquid octane(CH3)(CH2)6CH3) reacts with gaseous oxygen gas(O2) to produce gaseous carbon dioxide(CO2) and gaseous water(H2O). If 5.18 g of carbon dioxide is produced from the reaction of 3.43 g of octane and 19.1 g of oxygen gas, calculate the percent yield of carbon dioxide. Round your answer to 3 significant figures.
The percent yield of carbon dioxide will be 49.0 %.
Percent yieldFirst, let's look at the equation of the reaction:
[tex]2C_8H_1_8 + 25O_2 -- > 16CO_2 + 18H_2O[/tex]
The mole ratio of octane to oxygen is 2:25.
Mole of 3.43 g octane = 3.43/114.23 = 0.03 mol
Mole of 19.1 g oxygen = 19.1/32 = 0.60 mol
Thus, octane is limiting.
Mole ratio of octane to carbon dioxide = 2:16.
Equivalent mole of carbon dioxide = 0.03 x 8 = 0.24 mol
Mass of 0.24 mol carbon dioxide = 0.24 x 44.01 = 10.5624 grams
Percent yield of carbon dioxide = 5.18/10.5624 = 49.0 %
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
When 50 electrons drop from energy level 4 to energy level 2, how many photons of light are given off?
1 photon
100 photons
2 photons
50 photons
The number of photons given off will be 50 photons.
To find the answer, we need to know about the plank's equation.
How to find the number of photons emitted?We have the expression for energy of a single electron in eV as,[tex]E=-13.6(\frac{1}{(n_f)^2}- \frac{1}{(n_i)^2})eV\\[/tex]
We have,[tex]n_f=4\\n_i=2\\N=50[/tex]
Substituting values, we get,[tex]E=-13.6(\frac{1}{(4)^2}- \frac{1}{(2)^2})eV\\\\E=-13.6*-0.188=2.55eV[/tex]
For N electrons,[tex]E=50*2.55eV=127.5eV[/tex]
We have the plank's equation,E=nhf
From this, the number of photons emitted from 50 electrons will be,[tex]n=\frac{E}{h*f} =\frac{127.5*1.67*10^{-19}J}{(6.63*10^-34)Js} \\[/tex]
To find n, we have to find the frequency f. For that, we have the equation,[tex]\frac{1}{wave length}=R_H(\frac{1}{(n_i)^2}- \frac{1}{(n_f)^2})\\\\1/wv= 1.1*10^5(\frac{1}{(2)^2}- \frac{1}{(4)^2})=20625cm^{-1}.\\wavelength=486nm.[/tex]
Thus, frequency will be,[tex]f=\frac{c}{wavelength} =\frac{3*10^8}{486*10^{-9}} =6.172*10^{14}s{-1}[/tex]
Then, the number of photons will be,[tex]n=\frac{E}{h*f} =\frac{127.5*1.67*10^{-19}J}{(6.63*10^-34)Js*6.17*10^{14} s^{-1}} \\\\n=52.05 photons[/tex]
Thus, we can conclude that, the number of photons given off will be 50 photons.
Learn more about the photons here:
https://brainly.com/question/15946945
#SPJ1
An ideal gas in a closed container initially has a volume V and Temperature T the final tempera is 5/4T and the final pressure is 2P what is the final gas
Answer:
[tex]V_2 = \frac{5V}{8}[/tex]
Explanation:
I am assuming you are saying what is the final volume of the gas
Known :
Initial volume (V1) = V
Initial temperature (T1) = T
Final temperature (T2) = 5/4 T
Initial pressure (P1) = P
Final pressure (P2) = 2P
Wanted: Final volume (V2)
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\frac{PV}{T} = \frac{(2P)V_2}{(5/4)T}\\\frac{V}{1} = \frac{(2)V_2}{5/4}\\5/4V = 2V_2\\\\V_2 = \frac{5V}{8}[/tex]
• An alkane with the formula C5H12 undergoes chlorination to give only one product with the formula C5H11Cl. What is the structure of this alkane? •
Answer:
When an alkane undergoes a halogenation reaction, the majority of the products will add the halogen to the most substituted and most stable carbon. In this case, this would likely be the third carbon (middle).
Key:
Leftmost molecule = C₅H₁₂
Rightmost molecule = C₅H₁₁Cl
*Not pictured = HCl (another product)
Stibnite, Sb2S3, is a dark gray mineral from which antimony metal is obtained. If you have 2.00 kg of an ore that contains 15.1% antimony, what mass of Sb2S3 (in grams) is in the ore?
Answer: 421.264 grams.
Explanation: This problem is essentially testing you on your knowledge of percent mass except with one extra step.
We are given that there are 2kg or 2000 grams of ore. This ore is %15.1 Antimony. We can multiply 2000 grams by .151 to find the amount of Antimony which is 302 grams. We don't want the amount of Antimony though, we want the amount of Stibnite. To find the amount of Stibite, we can multiply the amount of Antimony by 1/(the percent mass of Antimony in 1 molecule of Stibnite. To find the percent mass we divided 2(molar mass of Sb) by the molar mass of one molecule of Stibnite. This calculation is 2(121.67)/339.69. This is the percent mass of Antimony in Stibnite. We take the inverse because we want to find out how much Stibite there is per amount of Antimony. We do 1/(((2(121.67))/339.69) and multiply that by 302 to find the total amount of Sb2S3.
Hope this helps!
15. When traveling through a smoke-filled area, a person must be able
distance of at least
in order to safely reach a fire exit.
O A. 10 feet
B. 12 feet
C. 4 feet
D. 8 feet
When traveling through a smoke-filled area, a person must be able to have distance of at least 4 feet in order to safely reach a fire exit. That is option C.
What is a smoke-filled area?Smoke-filled area is an enclosed area that is filled with smoke gas that is usually made up of carbon monoxide.
The smoke-filled area is usually caused by
Fire out breakBurning of plastics or chemical productsRelease of fuming gases.When there is smoke-filled area die to fire out break, there are some guidelines to follow to safely reach the fire exit early enough.
The importance of these guidelines include the following:
enable rescuers to navigate a scene more quickly,identify risks and hazards,locate safety points, determine the safest way in and out of a building, and map out evacuation routes.The affected individual should get down and crawl while taking short breath through the nose because cleaner air is nearest to the floor.
Learn more about distance here:
https://brainly.com/question/7243416
#SPJ1
For any spontaneous process, universe entropy intensifies is known as the __________ law of thermodynamics.
Group of answer choices
fourth
second
tenth
For any spontaneous process, universe entropy intensifies is known as the second law of thermodynamics.
What is entropy?Entropy is defined as the degree of randomness or disorderliness of a system.
The entropy of a system generally increases for any spontaneous process.
This is according to the second law of thermodynamics.
In conclusion, the entropy of a system is the a measure of randomness of the system.
Learn more about entropy at: https://brainly.com/question/21578229
#SPJ1
What is the mass of 3.40 x 10^35 formula units of KCl??
Answer: it is either 34x or it is 0 im not sure how you do the math or what your question is asking exactly sorry
Explanation:
Mass of 3.40 x 10^35 formula units of KCL is calculated to be 4.20 * 10^13.
What is formula unit?In chemistry, formula unit is the empirical formula of ionic or covalent network solid compound which is used as an independent entity for stoichiometric calculations. It is also the lowest whole number ratio of ions represented in ionic compound.
Convert molecules into moles.
6.02 x 1023 molecules = 1 mole
1 = (1 mole)/(6.02x1023 molecules)
(3.40x10^35 molecules KCL)*(1 mole KCL)/(6.02x1023 molecules KCL)
5.647 *10^11 moles Na2SO4
Molar mass of KCL = 74.55 g/mol
Mass of KCL= 5.647 *10^11 * 74.55
Mass of KCL = 4.20 * 10^13
To know more about formula unit, refer
https://brainly.com/question/24712181
#SPJ1
how much is 5 moles of lithium phosphide in grams
Answer:
we are given that mass of lithium four spade that is equal to 77.7 grams
When the soil is saturated in a gently sloping area, any additional rainfall in the area will most likely
When the soil is saturated in a gently sloping area, any additional rainfall in the area will most likely become surface run off.
What is super saturation?
Super saturation occurs with a chemical solution when the concentration of a solute exceeds the concentration specified by the value equilibrium solubility.
Additional water into the soil will cause the soil to be super saturated and eventually runs off due to the steepness of the area.
Thus, when the soil is saturated in a gently sloping area, any additional rainfall in the area will most likely become surface run off.
Learn more about surface run off here: https://brainly.com/question/21926984
#SPJ1
How many liters of fluorine gas are needed to
form 919 L of sulfur hexafluoride gas if the
following reaction takes place at 2.00 atm
and 273.15 K:
S(s) + 3F₂(g) → SF. (g)?
2756.1 liters of fluorine gas is needed to produce 919 liters of sulfur hexafluoride.
Given data:The volume of SF₆ = 919 L
Pressure = 2 atm
Temperature = 273.15 k
The volume of fluorine required =?
Balance chemical equation:
S (s) + F₂(g) → SF₆(g)
First of all, we will calculate the moles of SF₆.
PV = nRT
n = PV/RT
n = 2. atm× 919L / 0.0821 L. atm. mol⁻¹. K⁻¹ × 273.15 K
n = 1838 atm. L/ 22.43 L. atm. mol⁻¹
n = 81.9 mol
81.9 moles of SF₆ will produce.
Now we will compare the moles of SF₆ and fluorine from the balanced chemical equation.
SF₆: F
1 : 3
81.9 : 3/1 × 81.9 = 245.7 moles
Now we will calculate the volume of fluorine.
PV = nRT
V = nRT / P
V= 245.7 mol × 0.0821 L. atm. mol⁻¹. K⁻¹ × 273.15 K / 2 atm
V = 5512.2 / 2
V = 2756.1 L
2756.1 liters of fluorine gas are needed to produce 919 liters of sulfur hexafluoride.
To know more about volume refer to: https://brainly.com/question/18241314
#SPJ1
Caprylic acid is an 8-carbon saturated fatty acid. Draw the structure of caprylic acid. Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced Template toolbars. The single bond is active by default. Include all hydrogen atoms.
Caprylic acid is a saturated molecule with eight electrons and the COOH functional group.
What about hydrogen atoms?The initial element and primary component of stars, hydrogen, makes up nine out of every ten atoms in the cosmos. Helium makes up the other 10% of all atoms. Already 100 percent of that. On a cosmic scale, the remaining elements of the periodic table—Elements 3 through 118, lithium through ununoctium—barely register.
What makes hydrogen so crucial?Hydrogen may be utilized to heat our homes and places of work in addition to powering vehicles and producing energy. To reach net zero, it will be crucial to reduce our carbon emissions significantly.
To know more about hydrogen atom visit:
https://brainly.com/question/29695801
#SPJ4
Lactic acid has a pKa of 3.08. What is the approximate degree of dissociation of a 0.35 M solution of lactic acid?
A) 1.1%
B) 2.2%
C) 4.8%
D) 14%
E) none of the above
Your answer would be C, 4.8%.
Be sure to answer all parts. Outline a synthesis of the following Wittig reagent from Ph3P and an alkyl bromide.
The Wittig reaction is a chemical reaction used to synthesize alkenes from aldehydes or ketones using a phosphonium ylide (also known as a Wittig reagent) as the nucleophile.
What is Wittig reagent?When an aldehyde or ketone reacts chemically with a triphenyl phosphonium ylide (often referred to as a Wittig reagent), an alkene and triphenylphosphine oxide are produced. This reaction is known as the Wittig reaction or Wittig olefination.
The synthesis of the Wittig reagent from Ph3P and an alkyl bromide can be outlined as follows:
1. Start with Ph3P (triphenylphosphine) and an alkyl bromide (R-Br) in a suitable solvent, such as dichloromethane (CH2Cl2).
2. Add a strong base, such as n-butyllithium (n-BuLi) or potassium tert-butoxide (t-BuOK), to the mixture. This will deprotonate Ph3P to give the phosphonium cation Ph3P+.
3. The alkyl bromide will act as a nucleophile and will react with the Ph3P+ cation to give the phosphonium ylide intermediate: Ph3P+-R-Br.
4. The intermediate will then lose a molecule of Br- to give the final Wittig reagent which is a phosphonium ylide : Ph3P=CHR
5. This reagent can be used as a nucleophile in the Wittig reaction to form an alkene.
Note that this reaction is not suitable for all types of Alkyl Bromides, and some may not be able to form the ylide intermediate or may form by products.
To know more about Wittig reagent visit:
https://brainly.com/question/14525721
#SPJ4
please help me with this question as soon as possible
Answer:
nah what questionExplanation:
(E)-1,2-dibromo-3-isopropyl-2-hexene Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced Template toolbars. The single bond is active by default.
Image of (E)-1,2-dibromo-3-isopropyl-2-hexene is shown as in the diagram.
What is meant by stereochemistry?In organic chemistry, structure is not the only thing that matters because the positions of the groups are also very important. This is because, stereochemistry of the compound can be used to determine if the compound is susceptible to certain reaction or not.
Stereochemistry is a subdiscipline of chemistry that involves the study of the relative spatial arrangement of atoms that form the structure of the molecules and their manipulation.
Stereochemistry is the study of three‐dimensional structure of molecules. The cis and trans isomers are forms of stereoisomers, differing in structure only in the location of atoms of the molecule in three‐dimensional space.
To know more about stereochemistry, refer
https://brainly.com/question/13266152
#SPJ4
b) Explain why Carbon (IV) oxide and water are removed before liquefaction of air
Answer:
Before air is liquefied, water vapor and carbon dioxide are removed, because these substances solidify when cooled and would clog the pipes of the air liquefaction plant.
Which of these compounds is the ester formed from the reaction of acetic acid and 1-propanol? O 1
O 2
O 3
O 4
O 5
The ester formed from the reaction of acetic acid and 1-propanol is O3, which is propyl acetate.
What is ester of acetic acid ?The chemical compound ethyl acetate, also known as ethyl ethanoate or EtOAc or EA, has the formula C4H8O2 and is an organic compound. This clear liquid is used to decaffeinate tea and coffee as well as in glues and nail paint removers. It has a distinctive sweet scent akin to pear drops. The ester of ethanol and acetic acid, ethyl acetate is produced in huge quantities for use as a solvent.
Due to its affordability, low toxicity, and pleasant smell, ethanol acetate is mostly employed as a solvent and diluent. It is frequently utilized, for instance, to clean circuit boards and in some nail polish removers (acetone is also used). This solvent is used to decaffeinate tea leaves and coffee beans. Additionally, it serves as a hardener or activator in paints. Fruits, colognes, and confections all contain ethyl acetate. In perfumes, it swiftly evaporates, leaving the fragrance on the skin.
To know more about ester of acetic acid visit:
https://brainly.com/question/16831573
#SPJ4
The second order reaction A → Products takes 13.5 s for the concentration of A to decrease from 0.740 M to 0.319 M. What is the value of k for this reaction?
The rate constant of the second order reaction is 0.137 M-1s-1.
What is the rate constant?For the second order reaction we can write;
1/[A] = kt + 1/[A]o
[A]o = initial concentration
[A] = final concentration
k = rate constant
t = time
Now;
1/0.319 = 13.5k + 1/ 0.740
1/0.319 - 1/0.740 = 13.5k
3.13 - 1.35 = 13k
k = 3.13 - 1.35/13
k = 0.137 M-1s-1
Learn more about second order reaction:https://brainly.com/question/12446045
#SPJ1
Which of the following rules is applicable for balancing a chemical equation?
Change only the coefficients
Add the coefficients and change the subscripts
Change only the subscripts
Change the coefficients and the subscripts
Answer:
A.) Change only the coefficients
Explanation:
An equation is balanced when there is an equal quantity of each type of element on both sides of a reaction. When balancing an equation, the only way to manipulate the amounts of each element is by changing the coefficient values. The coefficients alter the amount of each molecule in the reaction.
The subscripts cannot be altered. If you were to change the subscripts, you would be altering the amount of atoms in a particular molecule.
Balance the following reaction: NH3 + I2 --> N2I6 + H2
The balanced equation will be [tex]2NH_3 + 3I_2 -- > N_2I_6 + 3H_2[/tex]
What are balanced equations?They are chemical equations that obey the law of conservation of atoms.
In other words, they are equations in which the number of atoms before and after reactions are the same.
Thus, the balanced equation for the reaction will be [tex]2NH_3 + 3I_2 -- > N_2I_6 + 3H_2[/tex]
More on balancing equations can be found here: https://brainly.com/question/7181548
#SPJ1
The diagram shows the setup of an experiment. A few observations of the experiment are listed in table below the diagram.
Experimental Observations
1. Color of solution turned blue
2. Shiny hair like crystals deposited on the copper strip
Which of the following is the correct explanation for one of the given observations?
Observation 1 is a result of silver ions moving into the solution.
Observation 2 is a result of nitrate ions moving into the solution.
Observation 1 is a result of silver ions changing their oxidation state.
Observation 2 is a result of silver ions changing their oxidation state.
Answer:
Observation 2 is a result of silver ions changing their oxidation state.
Explanation:
Silver is reduced and forms silver precipitate. Observation 1 is a result of coppe being oxidized and forming copper nitrate
What is the molecular formula for the compound?
Enter the answer as YwBaxCuyOz where w, x, y, and z represent the coefficients.
The general formula for many YBCO compounds, also known as Y123, is YBa2Cu3O7x. However, materials with other Y: Ba: There are Cu ratios like YBa2Cu4Oy (Y124) and Y2Ba4Cu7Oy (Y247).
What is a Compound?A compound is a substance composed of two or more distinct chemical elements arranged in a predetermined ratio in chemistry. Chemical bonds that are difficult to break form when the elements combine and react with one another. Atomic electron sharing or exchanging results in the formation of these bonds.
compound Include in the list Share When a problem is compounded, something is added to make it worse, like pouring water on a grease fire. The combination is a compound word; A compound is a mixture or combination of at least two things.
A substance in science that is made by chemically joining two or more distinct elements. Table salt (NaCl), which is made from the elements sodium and chloride, and water (H2O), which is made from the elements hydrogen and oxygen, are examples of compounds.
To know more about the Compound, visit:
https://brainly.com/question/13516179
#SPJ1
Which of the following arranges the bonds in order of decreasing bond length?
The order of decreasing bond length is; C- P > C - N > C=N. Option B
What is bond length?A chemical bond is formed when two compounds combine together. We know that the strength of a bond is shown by the bond length and the bond order. Clearly, bonds that have shorter bond lengths tend to be stronger than longer bonds that have a longer bond distance.
This explains why triple bonds are shorter and stronger bonds. This stems for the high s contribution (50%) in the formation of the bond. Therefore, the order of decreasing bond lengths is single bonds > Double bonds > triple bonds.
Now applying this background to the case in point, we can see that the decreasing order of bond energy must have to do with increasing bond order and decreasing bond distance.
Hence, the order of decreasing bond length is; C- P > C - N > C=N.
Learn more about bond order:https://brainly.com/question/16526043
#SPJ1
The molecular orbitals depicted below are derived from 2p atomic orbitals in F2+, (a) Give the orbital designations. (b) Which is occupied by at least one electron in F2+,? (c) Which is occupied by only one electron in F2+,?
a) Orbital designation of F₂⁺ is shown below:
b) σ(2p) is occupied by at least one electron in F₂⁺
c) π*(2p) is occupied by only one electron in F₂⁺
What is Molecular orbital diagram?The molecular orbital diagram can be used to show the bonds inside a diatomic molecule. The magnetic characteristics of a molecule and their ionization-related changes can be determined using MO diagrams. The number of bonds shared between the two atoms, or the bond order of the molecule, is likewise shown by them.
The structure A represents an anti-bonding MO of side-wise overlapping of 2p-orbital. Thus designation of this orbital diagram is: π*(2p).
The structure B represents a bonding MO of head-on overlapping of 2p-orbital. Thus designation of this orbital diagram is: σ(2p)
The structure C represents a bonding MO of side-wise overlapping of 2p-orbital. Thus designation of this orbital diagram is: π(2p)
The structure D represents an anti-bonding MO of head-on overlapping of 2p-orbital. Thus designation of this orbital diagram is: σ*(2p)
a) Thus, orbital designation of F₂⁺ is shown below:
b) σ(2p) is occupied by at least one electron in F₂⁺
c) π*(2p) is occupied by only one electron in F₂⁺
To know more about orbital designation refer to:
https://brainly.com/question/5558334
#SPJ4
The complete question is as follows:
The molecular orbitals depicted below are derived from 2p atomic orbitals in F₂⁺, (a) Give the orbital designations. (b) Which is occupied by at least one electron in F₂⁺? (c) Which is occupied by only one electron in F₂⁺?