How are incomplete and complete metamorphoses the same?

Insects that go through these cycles form a cocoon.
Insects that go through these cycles start as an egg.
The infant insects that go through these cycles look different from the adult.
The insects that go through these cycles reproduce by laying unfertilized eggs.

Solutions, suspensions, and colloids are the three categories into which mixtures can be divided based on particle size.

A mixture is a substance composed of two or more additional chemical compounds or substances that do not chemically combine.

Little particles with a particle size of less than 1 nanometer are present in a solution. Centrifugation or decantation of the mixture cannot be used to separate the components of a solution. Air is one example of this.

A colloid is a mixture in which a component made up of insoluble particles that are scattered at a microscopic scale is suspended within another component. While some definitions limit the concept to liquid-dispersed particles, others broaden it to encompass materials like aerosols and gels.

A heterogeneous mixture of a finely dispersed substance in a liquid is referred to as a suspension. Similar to how salt and water dissolve in one another, the solid is not dissolved in the liquid.

To know about mixture

https://brainly.com/question/2331419

#SPJ4

The process of sublimation occurs when a solid transitions straight to a gas state.

Gas is a state of matter distinguished by its widely separated, quickly moving, and haphazardly ordered particle structure. The gaseous state, in which gases are substances, is one of the three fundamental states of matter. Gases are highly compressible and have extraordinarily large intermolecular distances.

Other than being in solids and liquids, matter can also exist in the physical form of gases. Every gas has a weight. In contrast to liquids or solids, gases will fill the entire container in which they are contained.

To know more about gas state visit:

https://brainly.com/question/29585726

#SPJ4

8.94atm is the  pressure, in atmospheres, is exerted by 1.725 mol of hydrogen gas (O2) in a 4.78 L container at 298K.

The force delivered perpendicularly to an object's surface per unit area throughout which this force is dispersed is known as pressure. The pressure as compared to the surrounding air is known as gauge pressure (445).

Pressure is expressed using a variety of units. Some of these come from dividing a unit of force by such a unit of area; for instance, the SI force acting on the object, the pascal (Pa), is equal to one newton every square meter.

P×V = n×R×T

P×4.78 =1.725×8.314×298

P =8.94atm

Therefore, 8.94atm is the  pressure, in atmospheres, is exerted by 1.725 mol of hydrogen gas (O2) in a 4.78 L container at 298K.

To learn more about pressure, here:

https://brainly.com/question/29341536

#SPJ1

The final volume is when  the 400 ml of 0.6 M HCl is diluted to the 0.5 M HCl is 480 mL.

The initial molarity of the solution , M₁ = 0.6 M

The initial volume of the solution, V₁ = 400 mL

The final molarity of the solution, M₂ = 0.5 M

The final volume of the solution, V₂ = ?

The dilution law is expressed as :

M₁ V₁ = M₂ V₂

V₂ = M₁ V₁ / M₂

V₂ = ( 0.6 × 400 ) /0.5

V₂ = 480 mL

Thus, the final volume of the solution is 480 mL with the molarity of the 0.5 M.

To learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

There were no matches again for oxidation number of such a phosphorus atom in the formula p4: A. +4 B. +3 D. -3 E. 0 Chemically speaking, phosphorus has the atomic number 15 and the letter P.

A phosphorus atom has fifteen protons. An element can be distinguished from another element by its atom by its atomic number. The amount of protons in the atom's nucleus determines this figure. The nucleus of phosphorus contains 15 protons, as indicated by the element's atomic number, which is 15.

Phosphorus is only found in phosphates, which are compounds made up of a phosphorous element bound to four other elements, in its pure form in nature.

To know more about phosphorus visit:

https://brainly.com/question/4622631

#SPJ4

The substantial quantity of energy needed today places a constraint on the industrial manufacturing of fertilizers containing nitrogen.

The majority of the nitrogen, which makes up 78% of such air we breathe, is assumed to have been ultimately trapped in the pieces of primordial debris that formed early Earth. They formed as a result of their collision, and ever since then, their nutrient content has been leaking out along the melted cracks in the planet's crust.

The primary nitrogen source used in natural and anthropogenic sources is the combustion of natural fuels like coal and oil. Nitrogen may be deposited in the atmosphere as dry particulate, gases, and droplets or as a wet form such as rain, ice, hail, fog, & freezing rain.

To know more about nitrogen visit:

https://brainly.com/question/16711904

#SPJ4

Answer:

All of the above. According to the Kinetic Molecular Theory, the gas particles in this container behave in an elastic manner, meaning that they will bounce off each other and the walls of the container without losing energy. The kinetic energy of the gas particles is also dependent on temperature, meaning that the higher the temperature, the faster the particles will move. Finally, energy is not lost when gas particles collide with each other or the walls of the container.

Energy is not lost when gas particles collide with each other or with the walls of the container. Therefore, all of the above are correct.

The gas laws mentioned in earlier modules of this chapter are adequately explained by the kinetic molecular theory (KMT), a straightforward microscopic model. The five postulates listed below form the foundation of this theory.

Although certain gases, like the noble gases, are made up of atomic species, the term "molecule" is going to be employed to refer to the specific chemical species that make up the gas. Gas particles are elastic and do not attract each other. The kinetic energy of gas is dependent on temperature. Energy is not lost when gas particles collide with each other or with the walls of the container.

Therefore, all of the above are correct

To know more about kinetic molecular theory, here:

https://brainly.com/question/134712

#SPJ2

When 12 moles of C3H8 are used in the reaction, 36 moles of CO2 are created.

Every time one mole of C3H8 propane reacts with five moles of oxygen, three moles of carbon dioxide (CO2) and four moles of water (H2O) are produced.

The balanced chemical equation reads as follows: C3H8 + 5O2 3CO2 + 4H2O

We can observe that 3 moles of CO2 are created for every 1 mole of C3H8 that is used in the process.

We need to carry out a straightforward mole-to-mole conversion to determine how many moles of CO2 are generated when 12 moles of C3H8 are used:

12 moles C3H8 x (1 mole C3H8 / 3 moles CO2) = 36 moles CO2.

As a result, when 12 moles of C3H8 are used in the reaction, 36 moles of CO2 are created.

To know more about reaction visit:-

https://brainly.com/question/14917187

#SPJ1

Option- B : The electron transport chain is considered an aerobic pathway, meaning it requires Oxygen.

Cellular respiration may be divided into two categories: aerobic and anaerobic. One occurs when there is a supply of oxygen (aerobic), whereas the other takes place without the help of oxygen (anaerobic). Both begin with the splitting of glucose during glycolysis. Anaerobic systems, like glycolysis, function with out oxygen that exists.

Oxygen and glucose combine during cellular respiration to create ATP. Byproducts also include release of water and carbon dioxide. The Krebs cycle, oxidative phosphorylation, and glycolysis—an anaerobic process—are the three steps of aerobic cellular respiration.

Aerobic refers to the body's use of oxygen to produce energy and implies "with air." Any exercise last more than two minutes generally falls into this group. Aerobic exercise is performed continually in a "steady state." The term anaerobic means "without air."

For such more questions on aerobic pathway:

brainly.com/question/9505966

#SPJ4

Due to the protons it provided, HCl(g). Due to the fact that it can lose a proton in the opposite process, H3O+ is the conjugate acid of H2O.

Rearranging the atoms and molecules of two or more chemicals when they come into touch with one another, producing the production of one or more new substances. The interaction of two different substances' electrons is what drives chemical reactions.

Chemical reactions entail the formation of new bonds between atoms in the reactant molecules and the breaking of existing links between reactant molecules in the product particles. Both before and after the chemical transition, there were the same number of atoms, but the number of molecules will vary.

To know more about Reactions visit:

https://brainly.com/question/28984750

#SPJ1

Answer:

Use Kinetic Molecular Theory to describe the effect of adding a gas to a container that cannot expand. An increase in the number of gas particles in the container increases the number of collisions with the walls and increases the pressure of the gas. An increase in the number of gas particles in the container decreases the average energy of each particle and decreases the temperature of the gas. An increase in the number of gas particles in the container causes the container to break. An increase in the number of gas particles in the container only increases the number of moles but does not change the behavior of the gas.

According to the Kinetic Molecular Theory, when a gas is added to a container that cannot expand, the number of particles in the container increases, which increases the number of collisions between the particles and the walls of the container. This causes an increase in the pressure of the gas. As the number of gas particles increases, the average energy of each particle decreases, resulting in a decrease in the temperature of the gas. However, the number of moles of gas remains constant, so the behavior of the gas remains the same.

Answer:

An increase in the number of gas particles in the container increases the number of collisions with the walls and increases the pressure of the gas.

Explanation:

We should read volumes at the bottom of a meniscus because it allows us to get better and accurate result.

Generally the curve present in chemical apparatus is known as a meniscus. Basically, the graduated cylinder is calibrated so that reading the bottom of the meniscus, when it is viewed at eye level, will give best and accurate results. And viewing the meniscus at any other angle than eye level will give inaccurate results.

We should measure so that the line you are reading must stay even with the center of the meniscus. Let's consider an example in water and most other liquids, this is the bottom of the meniscus. But for mercury, take the measurement from the top of the meniscus. In both cases, we are measuring based on the center of the meniscus.

Learn more about meniscus from the link given below.

https://brainly.com/question/28013459

#SPJ4

Iodine is the element which is a main group element with an odd atomic number. Therefore, the correct option is option D.

The main group of elements in chemistry as well as atomic physics are those whose lightest members are depicted by helium, alkaline earth metals, beryllium, boron, dioxide, nitrogen, oxygen, as well as fluorine as listed inside the the element's periodic table. This group of elements is also referred to as the representative elements.

Except for hydrogen, which is occasionally excluded, the elements in group 1 and 2 (s-block) plus groups 13 to 18 make up the major group (p-block). Iodine is the element which is a main group element with an odd atomic number.

Therefore, the correct option is option D.

To learn more about main group element, here:

https://brainly.com/question/3903501

#SPJ1

The formal charge of a nitrogen atom that has no lone pairs and forms two double bonds is +1

The formal charge of an atom is calculated by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons.

Nitrogen having atomic number 7 and electronic configuration 1s²2s²2p³ has five valence electrons. If it forms two double bonds, then it is sharing four electrons with each bond, for a total of 8 electrons. This means that nitrogen has lost 3 electrons compared to the neutral atom, due to which it will have a formal charge of +1.

To know more about formal charge here

https://brainly.com/question/30806728

#SPJ4

The potential energy and kinetic energy are the same as they are interconvertible with each other. The potential energy  occurs when the body is at rest and the kinetic energy occurs when the body is in the motion.

The Potential and the kinetic energy are two forms of the energy that can be converted in to the each other. Potential energy is the stored energy in the object or the system by the virtue of its the position or the arrangement of parts. The kinetic energy is the energy of the object or the system's particles in the motion.

When an object is at the rest, the body is said to have the potential energy. In another case, if  the object is in the motion, then it is said to have the kinetic energy.

To learn more about kinetic energy here

https://brainly.com/question/15871064

#SPJ4

Answer:

hello hello mike testing mike testing hello hello hello hello I think you cannot hear my voice

The dot structure for carbon dioxide (CO2) represents the arrangement of its constituent atoms and their valence electrons. Carbon dioxide is a linear molecule with the carbon atom in the center and two oxygen atoms attached to it.

To draw the dot structure for CO2, you first need to know the number of valence electrons for each atom. Carbon has four valence electrons, and each oxygen atom has six valence electrons. This gives a total of 16 valence electrons for CO2.

The dot structure is drawn by placing the atoms in the correct positions and then drawing single bonds between the carbon atom and each oxygen atom. The remaining valence electrons are then placed as lone pairs on the oxygen atoms to complete their octets.

It is important to follow the octet rule, which states that atoms tend to gain, lose, or share electrons to achieve a stable configuration of eight electrons in their outermost shell. In the case of CO2, each atom has a full octet, making the molecule stable.

Learn more about Carbon dioxide here:

https://brainly.com/question/3049557

#SPJ4

Answer:

Below

Explanation:

RBC (red blood cell)

option (c) 1.424×10^24 oxygen atoms.To determine the number of oxygen atoms in 52.06 g of carbon dioxide, we first need to calculate the number of moles of carbon dioxide present in the given sample.

The molar mass of carbon dioxide is 44.01 g/mol, which means that 1 mole of carbon dioxide contains 6.022×10^23 molecules. Therefore, the number of moles of carbon dioxide present in 52.06 g of the compound can be calculated as follows:

Number of moles = Mass/Molar mass = 52.06 g / 44.01 g/mol = 1.182 mol

Each molecule of carbon dioxide contains one carbon atom and two oxygen atoms. Thus, the total number of oxygen atoms in the sample can be calculated by multiplying the number of moles of carbon dioxide by the number of oxygen atoms per molecule and Avogadro's number (6.022×10^23):

Number of oxygen atoms = 2 × Number of moles × Avogadro's number

= 2 × 1.182 mol × 6.022×10^23

= 1.424×10^24

Therefore, the correct answer is option (c) 1.424×10^24 oxygen atoms.

Find  out more about oxygen

brainly.com/question/30812745

#SPJ4

NH3 or ammonia is a basic substance. By taking a proton (H+) from an acid to create the ammonium ion (NH4+), it can function as a weak base. Ammonia will combine with water molecules in water to generate

Ammonia (NH3), an odourless gas with a wide range of industrial applications, is widely utilised. It is a crucial ingredient in the creation of plastics, cleaning supplies, and fertilisers. In addition to these uses, ammonia is also a refrigerant and is a component in the manufacturing of drugs and explosives. It can accept a proton (H+) from an acid to generate the ammonium ion (NH4+) since it is a basic molecule. Ammonia creates hydroxide and ammonium ions in water, which results in a basic solution. Yet, ammonia is also a hazardous gas that, if handled improperly, may be detrimental to both humans and animals.

Learn more about ammonia here:

https://brainly.com/question/15409518

#SPJ4

K2S is created in a complex by K+ and S2-. Two K+ ions and one S2- ion, for a total of three ions, are present in a single formula unit.

What is an ion?

Any particle or collection of atoms with one or more positive or negative electrical charges is known as an ion. Cations are positively charged ions, and anions are negatively charged ions. Ions are created when neutral atoms, molecules, or other ions have electrons added to them or taken away from them. Ions can also be created when other particles are combined with them, or when a covalent bond between two atoms is broken and both of the bond's electrons are left in association with one of the former bonded atoms. These processes include the addition of a hydrogen cation to an ammonia molecule to create an ammonium cation, the reaction of an atom of sodium with an atom of chlorine to form a sodium cation and a chloride anion, and others.

Learn more about ion:

https://brainly.com/question/29183072

#SPJ4

Therefore, 50 mL of distilled water must be added to 0.5 mL of 0.1 M FeCl₃ to make it 0.001 M FeCl₃.

Distilled water is a type of purified water that has gone through a process of distillation, which involves boiling water and then condensing the steam into a separate container. This process removes impurities and minerals from the water, resulting in a very pure form of water. Distilled water is often used in laboratory experiments and medical procedures where purity is important. It can also be used in household appliances, such as irons and humidifiers, to prevent mineral buildup that can lead to damage or decreased performance.

Here,

To calculate the amount of distilled water that must be added to 0.5 mL of 0.1 M FeCl₃ to make it 0.001 M FeCl₃, we can use the dilution formula:

M1 x V1 = M2 x V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

We can rearrange this formula to solve for V2, which represents the volume of water that must be added:

V2 = (M1 x V1) / M2

Plugging in the values we have:

M1 = 0.1 M (the initial concentration)

V1 = 0.5 mL (the initial volume)

M2 = 0.001 M (the final concentration)

V2 = unknown (the volume of water to be added)

V2 = (0.1 M x 0.5 mL) / 0.001 M

V2 = 50 mL

To know more about distilled water,

https://brainly.com/question/23802525

#SPJ1

The appropriate Pb oxidation number in each of these compounds is +4,0,+2, according to option (b).

The oxidation states of the substrate fluctuate during a redox (reduction-oxidation) reaction. When an oxidation occurs, the oxidation state increases or electrons are lost, but when a reduction occurs, electrons are added or the oxidation state decreases.

The negative lead and positive lead dioxide electrodes are dissolved in the sulfuric acid electrolyte to produce a low-cost first-action battery. The electrodes' number of plates, size, or other characteristics can be altered depending on the intended function.

To know more about oxidation number visit :-

https://brainly.com/question/29263066

#SPJ4

Answer and Explanation:

To convert 120 kPa to atmospheres, we can use the following conversion factor:

1 atmosphere = 101.325 kPa

We can use this conversion factor to set up a proportion and solve for the number of atmospheres.

120 kPa * (1 atm / 101.325 kPa) = 1.184 atm

Therefore, 120 kPa is equivalent to approximately 1.184 atmospheres (rounded to three decimal places).

A spectrophotometry experiment involves spectrophotometer, blank solution ,sample solutions and cuvette .

Spectrophotometry is a method to measure how much a chemical substance absorbs light by measuring the intensity of light as a beam of light passes through sample solution. The basic principle is that each compound absorbs or transmits light over a certain range of wavelength.

This measurement can also be used to measure the amount of a known chemical substance. Spectrophotometry is one of the most useful methods of quantitative analysis in various fields such as chemistry, physics, biochemistry, material and chemical engineering and clinical applications.

Learn more about spectrophotometer,here:

https://brainly.com/question/24195565

#SPJ1

In one of the reactions in the electron transport chain, coenzyme Q (i.e., "Q") transfers electrons to Complex III. Complex III is oxidized because it loses electrons, and Q is reduced because it gains electrons. Therefore, option B is correct.

A reaction that happens when an oxidising material and a reducing substance come into contact. In the reaction, the reducing material obtains electrons while the oxidising substance loses electrons.

After obtaining them from several redox enzymes engaged in important metabolic pathways including pyrimidine biosynthesis, a particular route of fatty acids' oxidation, and glucose and fatty acids metabolism, CoQ transfers electrons to Complex III.

Q is reduced because it absorbs electrons, whereas Complex III is oxidized because it loses electrons.

Thus, option B is correct.

To learn more about an oxidation and reduction, follow the link;

https://brainly.com/question/13699873

#SPJ1

The temperatures 110 and 145 are possible

When two items with different temperatures come in contact with one another, energy moves from the hotter (higher temperature) object to the cooler (lower temperature) object until both objects reach the same temperature.

A point of balance is eventually reached. When this occurs, the temperature of the atoms in both objects is the same since they are moving with the same speed as shown.

Learn more about temperature:https://brainly.com/question/11464844

#SPJ1

The formula of the magnesium nitrate is Mg(NO₃)₂.  The magnesium nitrate that is  Mg(NO₃)₂ is the ionic compound.

The Magnesium nitrate is the compound that contains the one atom of the magnesium, the  two atoms of the nitrogen, and the six atoms of the oxygen. The formula of the magnesium nitrate is Mg(NO₃)₂.

The Magnesium Nitrate is an ionic compound that is formed by the cation of the Magnesium Mg²⁺, and the polyatomic anion that is the Nitrate NO³⁻ ion. The charges will be equal and it will be the opposite in order for the two ions to form the bond together. Therefore, the one charge of  + 2 of the magnesium ion will be require the two charge of  -1 nitrate ions to balance it.

To learn more about magnesium nitrate here

https://brainly.com/question/8177054

#SPJ4

The streak test involves determining the color of the powder produced by rubbing a mineral against an unglazed porcelain plate. Therefore, the answer is (C) the color of the powder a mineral makes.

A mineral is a naturally occurring inorganic solid with a specific chemical composition and a crystalline structure. Minerals are the building blocks of rocks, and they form through a variety of geological processes, such as cooling and solidification of magma, precipitation from hot water solutions, and alteration by pressure and heat. There are thousands of different minerals, each with its own unique properties and characteristics. Some minerals, such as quartz and feldspar, are very common in the Earth's crust, while others, such as diamond and gold, are rare and highly valued.

Here,

This test can be useful in mineral identification because some minerals may have a different color streak than their outward appearance, due to variations in the composition of the mineral. For example, hematite, which is commonly a dark gray or black color, produces a reddish-brown streak. Similarly, pyrite, which is often a brassy yellow color, produces a greenish-black streak. By performing a streak test, the student can gather more information about the mineral and use that information to help identify it.

To know more about mineral,

https://brainly.com/question/8831889

#SPJ1