How could Miguel use strips of different lengths to make a 4 inch line

The fraction that is equivalent to the repeating decimal 0.35 is 7/20.

To determine the fraction that is equivalent to the repeating decimal 0.35, we can follow the steps below:

Step 1: Let x be equal to the repeating decimal 0.35.

Step 2: Multiply both sides of the equation in Step 1 by 100 to eliminate the decimal point:

   100x = 35.35

Step 3: Subtract the equation in Step 1 from the equation in Step 2 to eliminate the repeating decimal:

   100x - x = 35.35 - 0.35
          99x = 35

Step 4: Simplify the equation in Step 3 by dividing both sides by 99:

   x = 35/99

Step 5: Simplify the fraction 35/99 to reduced form by dividing both the numerator and denominator by their greatest common factor, which is 5:

   35/99 = (7 x 5)/(11 x 9 x 5) = 7/20

Therefore, the fraction that is equivalent to the repeating decimal 0.35 is 7/20.

To understand how we arrived at the fraction 7/20 as the equivalent of the repeating decimal 0.35, we need to have a basic understanding of decimals and fractions.

Decimals are a way of expressing parts of a whole in base 10. In a decimal number, the digits to the right of the decimal point represent fractions of 10, 100, 1000, and so on. For example, the decimal 0.35 represents 3/10 + 5/100, which can be simplified to 35/100.

On the other hand, fractions are a way of expressing parts of a whole in terms of a numerator and a denominator. The numerator represents the number of equal parts being considered, and the denominator represents the total number of equal parts that make up the whole. For example, the fraction 7/20 represents 7 parts out of 20 equal parts, or 7/20 of the whole.

Sometimes, a decimal number can be expressed as a fraction with integers as the numerator and denominator. These types of fractions are called rational numbers, and they can be expressed as terminating decimals or repeating decimals.

Terminating decimals are decimals that end, such as 0.5, 0.75, or 0.125. These decimals can be expressed as fractions with integers as the numerator and denominator by counting the number of decimal places and setting the denominator to a power of 10 that corresponds to that number. For example, 0.5 can be expressed as 5/10, which simplifies to 1/2.

Repeating decimals are decimals that have a pattern of one or more digits that repeat infinitely. For example, the decimal 0.333... has a repeating pattern of 3, and the decimal 0.142857142857... has a repeating pattern of 142857. These decimals can also be expressed as fractions with integers as the numerator and denominator.

To convert a repeating decimal to a fraction

We start by letting x be the repeating decimal, and we multiply both sides of the equation by 10, 100, 1000, or some other power of 10 to eliminate the decimal point. We then subtract the original equation from the new equation to eliminate the repeating decimal, and we simplify the resulting equation by dividing both sides by a common factor. The resulting fraction can then be simplified to reduced form by dividing both the numerator and denominator by their greatest common factor.

In the case of the repeating decimal 0.35, we followed these steps and arrived at the fraction 7/20 as the equivalent. This means that 0.35 and 7/20 represent the same value or amount. To verify this, we can convert 7/20 to a decimal by dividing 7 by 20, which gives 0.35.

Therefore, 0.35 and 7/20 are equivalent forms of the same value or amount.

To know more about fraction visit:

brainly.com/question/10354322

#SPJ11

Answer: 2 inches per hour, and Lois's rate is 3 inches per hour.

Step 1 of 2

Tamika started knitting last week.

Her starting length is not equal to zero.

Since Tamika's rate is constant, form the table we can conclude that her constant rate is 2 inches per hour.

Therefore, her table is as follows:

Step 2 of 2

Lois has started knitting just now.

Her starting length is zero.

From the table, after two hours Lois knitted 6 inches of scarf.

We are given that, her rate of knitting is constant.

Therefore, we conclude that her constant rate is 3 inches per hour.

Final answer

Therefore, Tamika's rate is 2 inches per hour, and Lois's rate is 3 inches per hour.

Probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days is approximately 0.0764 or 7.64%.

The length of pregnancy for a pregnant woman is a continuous random variable. The normal gestation period is between 37 and 42 weeks, which corresponds to 259 and 294 days. Assuming a normal distribution, we can use the mean and standard deviation of the gestation period to find the probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days.

Let's assume that the mean length of pregnancy is μ = 280 days and the standard deviation is σ = 14 days.

We can use the standard normal distribution to find the probability of a value less than 260 days:

z = (260 - μ) / σ = (260 - 280) / 14 = -1.43

Using a standard normal distribution table or calculator, we can find that the probability of a standard normal variable being less than -1.43 is 0.0764.

Therefore, the probability that a randomly selected pregnant woman has a length of pregnancy less than 260 days is approximately 0.0764 or 7.64%.

To know more about Probability refer here

https://brainly.com/question/30034780#

#SPJ11

The function r(x) = (x + 1)(x - 3)/(x + 3)(x - 7) has a y-intercept of -2/3.

The rational function r(x) = (x + 1)(x - 3)/(x + 3)(x - 7) has a y-intercept when x = 0.

Plugging in x = 0, we get r(0) = (0 + 1)(0 - 3)/(0 + 3)(0 - 7)

Which simplifies to r(0) = (-1)(-3)/(-7)(3), resulting in r(0) = 1/7.

So, the y-intercept is (0, 1/7).
The function also has vertical asymptotes at x = -3 (smaller value) and x = 7 (larger value).
The function r has vertical asymptotes at the values of x where the denominator is equal to zero.

This occurs when (x + 3) = 0 and (x - 7) = 0.

Solving these equations, we find the vertical asymptotes at x = -3 (smaller value) and x = 7 (larger value).

For similar question on function:

https://brainly.com/question/21145944

#SPJ11

To find the y-intercept of r(x), we plug in x = 0: r(0) = (0 + 1)(0 - 3)/(0 + 3)(0 - 7) = -3/21 = -1/7. Therefore, the function r has a y-intercept of -1/7.

To find the vertical asymptotes of r(x), we set the denominators of the fractions equal to zero:

x + 3 = 0  and x - 7 = 0

Solving for x, we get:

x = -3 and x = 7

Therefore, the function r has vertical asymptotes at x = -3 (smaller value) and x = 7 (larger value).

To find the y-intercept of the rational function r(x) = (x + 1)(x - 3)/(x + 3)(x - 7), we need to set x = 0 and solve for r(0):

r(0) = (0 + 1)(0 - 3)/(0 + 3)(0 - 7) = (1)(-3)/(3)(-7) = 3/7

So, the y-intercept is at (0, 3/7).

Now, to find the vertical asymptotes, we look at the denominator of the rational function, which is (x + 3)(x - 7). The vertical asymptotes occur when the denominator equals 0. We set each factor equal to 0 and solve for x:

x + 3 = 0 → x = -3 (smaller value)
x - 7 = 0 → x = 7 (larger value)

So, the function r has vertical asymptotes at x = -3 and x = 7.

Learn more about denominators at: brainly.com/question/7067665

#SPJ11

Answer: To solve this problem, we can use the equations of motion for projectile motion. Let's calculate the time of flight, horizontal distance, and maximum height of the ball.

Time of Flight:

The time of flight can be determined using the vertical motion equation:

where:

h = initial height = 3 ft

v₀y = initial vertical velocity = v₀ * sin(θ)

v₀ = initial speed = 125 ft/sec

θ = launch angle = 40 degrees

g = acceleration due to gravity = 32.17 ft/sec² (approximate value)

We need to solve this equation for time (t). Rearranging the equation, we get:

Using the quadratic formula, t can be determined as:

where:

Plugging in the values, we have:

Solving the quadratic equation for t, we get:

Therefore, the ball was in the air for approximately 4.86 seconds.

Horizontal Distance:

The horizontal distance traveled by the ball can be calculated using the horizontal motion equation:

where:

Plugging in the values, we have:

d = 95.44 * 4.86

d ≈ 463.59 feet

Therefore, the ball traveled approximately 463.59 feet horizontally.

Maximum Height:

The maximum height reached by the ball can be determined using the vertical motion equation:

Using the previously calculated values:

Plugging in these values, we can calculate the maximum height:

h = 80.21 * 4.86 - (1/2) * 32.17 * (4.86)²

h ≈ 126.98 feet

Therefore, the ball reached a maximum height of approximately 126.98 feet.

The limit of lim as x approaches infinity (ln(x+1))/(ln(2x-3)) using L'Hopital's rule is 1.

To find the limit using L'Hopital's rule, we need to take the derivative of both the numerator and denominator and evaluate the limit again:

lim as x approaches infinity (ln(x+1))/(ln(2x-3))

= lim as x approaches infinity (1/(x+1))/((2/(2x-3)))

= lim as x approaches infinity ((2x-3)/(2(x+1)))

= lim as x approaches infinity ((2x)/(2(x+1))) - 3/(2(x+1))

= lim as x approaches infinity (2/(2+1/x)) - 0

= 2/2 = 1

Therefore, the limit of the given series as x approaches infinity is 1.

Look here to know more about L'Hopital's rule

https://brainly.com/question/30763940

#SPJ11

The orthogonal projection of p(x) onto the line L spanned by q(x) is (4/7)(2x^2 - 2x + 1).

The orthogonal projection of p(x) onto L can be found using the formula:

projL(p) = <p, u> / <u, u> * u

where u is the unit vector in the direction of q(x). To find u, we need to normalize q(x) by dividing it by its magnitude:

||q|| = sqrt(<q, q>) = sqrt(6)

u = q / ||q|| = (2x^2 - 2x + 1) / sqrt(6)

Now we can plug in the values of p(x) and q(x) to evaluate the inner products:

<p, u> = 3(-1)(1/√6) + 3(0)(0) + 3(2)(1/√6) = 2√6

<u, u> = (1/√6)(4) + (-2/√6)(-2) + (1/√6)(1) = 7/√6

Finally, we can substitute these values into the projection formula to find projL(p):

projL(p) = (2√6 / (7/√6)) * (2x^2 - 2x + 1) / √6

Simplifying this expression gives:

projL(p) = (4/7)(2x^2 - 2x + 1)

So the orthogonal projection of p(x) onto the line L spanned by q(x) is (4/7)(2x^2 - 2x + 1).

Learn more about orthogonal projection here

https://brainly.com/question/30723456

#SPJ11

The volume of the square pyramid is about 4704 cubic units

The figure in the question is a square pyramid.

The volume of a regular pyramid = (1/3) × Base area × Height

Therefore;

The volume of the square pyramid can be found as follows;

Base area = 14 × 14 = 196

The height, h, of the pyramid can be found using the Pythagorean Theorem as follows;

h = √(25² - (14/2)²) = 24

Therefore;

Volume of the square pyramid = 196 × 24 = 4704 cube units

Learn more on the volume of a pyramid here: https://brainly.com/question/31511192

#SPJ1

The integral evaluated using the transformation is ∫∫R (4u² + 15uv + 9) |J| dudv.

Evaluating the given integral using the transformation u - 4√3y and v = x + 3y, we can rewrite the integral as ∫∫R (4u² + 15uv + 9) |J| dudv, where R represents the region bounded by the lines y = -3x + 3, y = -3x, and y = -3x + 2. To simplify this further, we need to determine the Jacobian determinant |J| of the transformation. The Jacobian determinant is found by taking the partial derivatives of u and v with respect to x and y, respectively, and then calculating their determinant. After simplification, we can integrate the expression (4u² + 15uv + 9) |J| over the region R to obtain the final result

Mastering the technique of integrating over transformed regions is beneficial in solving a wide range of mathematical problems, particularly in multivariable calculus and mathematical physics.

Learn more about Integrals

brainly.com/question/18125359

#SPJ11

False. To make predictions of logarithmic dependent variables, they can be kept in their logarithmic form and the coefficients can be exponentiated to obtain the predicted values in the original scale.

This is commonly done in econometrics and other fields where logarithmic transformations are used to linearize relationships.

When making predictions using regression models, it is important to consider the form of the dependent variable. If the dependent variable is in logarithmic form, the relationship between the dependent and independent variables is no longer linear.

Therefore, in order to make meaningful predictions, the dependent variable needs to be transformed back to its original level form.

This is commonly done using an exponential transformation, where the natural logarithm of the dependent variable is taken, and then the exponential function is applied to convert it back to its level form. Once the dependent variable is back in its level form, predictions can be made using the regression model as usual.

To know more about logarithmic variable refer here:

https://brainly.com/question/31433625?#

#SPJ11

A polygon will be dilated on a coordinate grid to create a smaller polygon. The polygon is dilated using the origin as the center of dilation. The rule that could represent this dilation is G. (x, y) → (0.9x, 0.9y).Step-by-step explanation:The center of dilation is a point from which we take measurements of how much we should increase or decrease the original polygon to get the dilated polygon.

When the center of dilation is the origin, the rules of dilation are simple. In this case, we multiply the coordinates of each vertex of the original polygon by a scale factor to get the coordinates of the vertices of the dilated polygon. This is because the scale factor tells us how much we should stretch or shrink each side of the original polygon to get the sides of the dilated polygon. We should also note that the scale factor should always be positive, and it should be greater than 1 for enlargement and less than 1 for reduction.So, from the given options, the rule that could represent this dilation is G. (x, y) → (0.9x, 0.9y). This is because when we multiply the coordinates of each vertex of the original polygon by a scale factor of 0.9, we get the coordinates of the vertices of the dilated polygon.

To know more about polygon, visit:

https://brainly.com/question/23846997

#SPJ11

To find the equation of the tangent plane at a specific point on a surface, we need to calculate the partial derivatives of the parametric equations and evaluate them at the given point. The equation of the tangent plane at the point (2, 3, 1) is 3x + 3y + z - 16 = 0.

Given the parametric equations:

r(s,t) = ⟨st, st, s-t⟩

We can calculate the partial derivatives with respect to s and t as follows:

∂r/∂s = ⟨t, t, 1⟩

∂r/∂t = ⟨s, s, -1⟩

Now, we evaluate these derivatives at the point (2, 3, 1):

∂r/∂s = ⟨3, 3, 1⟩

∂r/∂t = ⟨2, 2, -1⟩

The tangent plane at the point (2, 3, 1) can be defined by the equation:

⟨x - x₀, y - y₀, z - z₀⟩ · ⟨3, 3, 1⟩ = 0

Where (x₀, y₀, z₀) is the given point (2, 3, 1).

Expanding the dot product, we get:

(3x - 3x₀) + (3y - 3y₀) + (z - z₀) = 0

Substituting the values for x₀, y₀, and z₀, we have:

3x - 6 + 3y - 9 + z - 1 = 0

Simplifying further:

3x + 3y + z - 16 = 0

Therefore, the equation of the tangent plane at the point (2, 3, 1) is 3x + 3y + z - 16 = 0.

Learn more about tangent plane : brainly.com/question/30565764

#SPJ11

A vector object for holding integers is defined as a container class that can hold a dynamic array of integers.

A vector object is a container class in C++ that provides dynamic arrays. It allows the programmer to create an array of any size at runtime and easily manipulate its elements. To define a vector object for holding integers, we need to use the following syntax:
```
vector vec;
```
This creates an empty vector object that can hold integers. We can then use various member functions of the vector class to add, remove, or modify the elements of the vector.

In C++, a vector object is a dynamic array container that can hold elements of any data type. To define a vector object for holding integers, we need to specify the data type as "int" and create an empty vector object using the following syntax:

```
vector vec;
```

This creates an empty vector object named "vec" that can hold integers. We can then use various member functions of the vector class to add, remove, or modify the elements of the vector. For example, we can add elements to the vector using the push_back() function as follows:

```
vec.push_back(10); // adds the integer 10 to the end of the vector
vec.push_back(20); // adds the integer 20 to the end of the vector
vec.push_back(30); // adds the integer 30 to the end of the vector
```

We can access the elements of the vector using the square bracket notation as follows:

```
int x = vec[0]; // assigns the value 10 to x
int y = vec[1]; // assigns the value 20 to y
int z = vec[2]; // assigns the value 30 to z
```

We can also use the size() function to get the number of elements in the vector:

```
int size = vec.size(); // assigns the value 3 to size
```

Overall, a vector object for holding integers is a very useful data structure in C++ that provides dynamic arrays with convenient member functions for manipulating the elements.

To know more about integers visit :-

https://brainly.com/question/490943

#SPJ11

(a) The type of indeterminate form obtained by direct substitution is "0/0" since plugging in 0 for x gives ln(0) which is undefined.

Direct substitution is a method used in mathematics to evaluate a function at a specific value by substituting that value directly into the function expression.

To use direct substitution, you simply replace the variable in the function expression with the given value and compute the result. This method is applicable when the function is defined and continuous at the given value.

(b) We can use L'Hôpital's Rule to evaluate the limit. Taking the derivative of both the numerator and denominator, we get limit evaluates to INFINITY.

The rule states that if the limit of the ratio of two functions, f(x)/g(x), as x approaches a certain value, is of the form 0/0 or ∞/∞, and the derivatives of both functions f'(x) and g'(x) exist and satisfy certain conditions, then the limit of the ratio can be found by taking the derivative of the numerator and the derivative of the denominator separately and then evaluating the resulting ratio.

lim x [In(x)] = lim x [1/x] (by the derivative of ln(x) = 1/x)
x→0+

Now, plugging in 0 for x, we get:

lim x [1/x] = INFINITY
x→0+

Therefore, the limit evaluates to INFINITY.

(c) Using a graphing utility (such as Desmos), we can graph the function y = ln(x) and see that as x approaches 0 from the right, the y-values increase without bound, confirming our result from part .

(b). The graph also shows that ln(x) is undefined for x <= 0.

            |

          5 |       /

            |     /

            |   /  

          2 | /    

            |      

            |      

         -5 |      

            |      

            |      

       -10  |      

            |

            |

       -15  |_______

            -10 -5 0 5 10

To know more about natural logarithm refer here:

https://brainly.com/question/29154694?#

#SPJ11

The matrix exponential e^At for the given system is computed using diagonalization of matrix A and the formula e^At = P * E * P^(-1), where P is the matrix of eigenvectors, E is the diagonal matrix of exponential eigenvalues, and P^(-1) is the inverse of P.

To compute the matrix exponential e^At for the given system x' = Ax, where A is the coefficient matrix, we can follow the steps outlined below:

Step 1: Diagonalize the matrix A.

Step 2: Compute the matrix exponential of D.

Step 3: Compute the matrix exponential e^At.

Step 1: Diagonalize matrix A.

| 25 -25 |

A = | |

| 20 -20 |

| 0 0 |

D = | |

| 0 5 |

| 1 1 |

P = | |

| 1 4 |

Step 2: Compute the matrix exponential of D.

| e^0 0 |

E = | |

| 0 e^5 |

Step 3: Compute the matrix exponential e^At.

e^At = P * E * P^(-1)

Performing the matrix multiplication, we obtain the matrix exponential e^At.

To learn more about matrix, click here: brainly.com/question/29335391

#SPJ11

Answer:1000 cm3

Step-by-step explanation:

Given, side of a cube =10cm.

We know, Volume of the cube = Side3

=Side × Side × Side

= (10×10×10) cm3

= 1000 cm3

The inner product defined by <v, w> = v1w1 + v1w2 + v2w1 + v2w2 does not satisfy the positivity property, thus it does not define an inner product in R^2.

To show that the inner product defined by <v, w> = v1w1 + v1w2 + v2w1 + v2w2 does not satisfy the properties of an inner product in R^2, we need to demonstrate that at least one of the properties is violated.

1. Positivity:

For an inner product, <v, v> should be greater than or equal to zero for any vector v, and <v, v> = 0 if and only if v is the zero vector.

Let's consider a non-zero vector v = (1, 0). Then <v, v> = 1(1) + 1(0) + 0(1) + 0(0) = 1. Since 1 is not equal to zero, the positivity property is violated.

Since the positivity property is not satisfied, the given expression does not define an inner product in R^2.

The complete question must be:

show that <v,w>=v1w1+v1w2+v2w1,v2w2 does not define an inner product of R^2.

Learn more about inner product :

https://brainly.com/question/30727319

#SPJ11

We can say that either B or G must be true based on the given premises.

Based on the given premises, we can deduce that if either M or N is true, then if F is true, G must also be true. This is represented by the statement (M ∨ N) ⊃ (F ⊃ G).

Furthermore, we know that if F is true, then G must also be true, as given in the premise F ⊃ G. Using Modus Ponens, we can infer that G must be true.

Using Constructive Dilemma, we can conclude that either B or G must be true. This is because if we assume B is true, then we can use Modus Ponens on (M ∨ N) ⊃ (F ⊃ G) and (B ⊃ F) to deduce that G must be true.

Similarly, if we assume G is true, then we can use Modus Ponens on F ⊃ G to deduce that G must be true.

To learn more about : premises

https://brainly.com/question/13556402

#SPJ11

Note the full question is

What logical reasoning and rules did you use to determine that either B or G must be true based on the given premises?

1. (M ∨ N) ⊃ (F ⊃ G)

2. D ⊃ ∼C

3. ∼C ⊃ B

4. M • H

5. D ∨ F / B ∨ G

6. D ⊃ B 2, 3, HS

7. M 4, Simp

8. M ∨ N 7, Add

9. F ⊃ G 1, 8, MP

10. (D ⊃ B) • (F ⊃ G) 6, 9, Conj

11. B ∨ G 5, 10, CD

We know that the maximum value of the objective function is 8 and occurs at (3,7), and the minimum value is -9 and occurs at (3,0).

To find the maximum and minimum values of the objective function, we need to first find all the critical points. These are points where the gradient is zero or where the function is not defined.

The objective function is F=2y−3x. Taking the partial derivative with respect to x, we get ∂F/∂x = -3, and with respect to y, we get ∂F/∂y = 2. Setting both equal to zero, we get no solution since they cannot be equal to zero at the same time.

Next, we check the boundary points of the feasible region. We have four boundary lines: y=2x+1, y=-2x+3, x=3, and the x-axis. Substituting each of these into the objective function, we get:

F(0,1) = 2(1) - 3(0) = 2
F(1,3) = 2(3) - 3(1) = 3
F(3,7) = 2(7) - 3(3) = 8
F(3,0) = 2(0) - 3(3) = -9

So the maximum value of the objective function is 8 and occurs at (3,7), and the minimum value is -9 and occurs at (3,0).

To know more about function refer here

https://brainly.com/question/21145944#

#SPJ11

The image of the vector v under the linear transformation t is (-4, 1, 6).

To find the image of a vector under a linear transformation, we need to apply the transformation matrix to the vector. In this case, the linear transformation t is defined as t(x, y, z) = (4x, y, 5y - z), and we want to find the image of the vector v = (0, 1, -1).

To find the standard matrix for the linear transformation t, we need to determine how the transformation t acts on the standard basis vectors. The standard basis vectors are the vectors e1 = (1, 0, 0), e2 = (0, 1, 0), and e3 = (0, 0, 1).

Applying the linear transformation t to the standard basis vectors, we have:

Therefore, the standard matrix for the linear transformation t is:

[4 0 0]

[0 1 0]

[0 0 -1]

To find the image of the vector v = (0, 1, -1), we multiply the transformation matrix by the vector:

[4 0 0] [0] [(-4)]

[0 1 0] [1] = [ 1 ]

[0 0 -1] [-1] [ 6 ]

Therefore, the image of the vector v under the linear transformation t is (-4, 1, 6).

In summary, to find the image of a vector under a linear transformation, we apply the transformation matrix to the vector. The transformation matrix is obtained by applying the transformation to the standard basis vectors. In this case, the image of the vector v = (0, 1, -1) under the linear transformation t = (4x, y, 5y - z) is (-4, 1, 6).

To learn more about linear transformation, click here: brainly.com/question/24113163

#SPJ11

The probability that a randomly selected point within the circle falls in the red shaded area is P = 0.6366

Given data ,

The probability that a randomly selected point within the circle falls in the red shaded area (Square) = Area of square / Area of the circle

On simplifying , we get

Area of square = 8² = 64 units²

And , the area of the circle is = πr²

C = ( 3.14 ) ( 4√2 )²

C = 100.530 units²

So , the probability is P = 64 / 100.530

P = 0.6366

Hence , the probability is P = 63.66 %

To learn more about probability click :

https://brainly.com/question/17089724

#SPJ1

Answer: 0.64

Step-by-step explanation:

the other person gave a percentage, but not what the question was asking for, so I just rounded his original answer, as was asked.

The Cartesian equation in the form x = f(y) for the given parametric equations is [tex]x = -4(y - 2)^2/25[/tex]

To eliminate the parameter t and express the given parametric equations in Cartesian form, we need to solve one equation for t and substitute it into the other equation.

Given:

[tex]x(t) = -4t^2[/tex]

y(t) = 2 + 5t

We'll start by solving the second equation for t:

y = 2 + 5t

Subtracting 2 from both sides:

y - 2 = 5t

Dividing both sides by 5:

t = (y - 2)/5

Now, we'll substitute this value of t into the first equation:

[tex]x = -4t^2\\x = -4((y - 2)/5)^2[/tex]

Simplifying:

[tex]x = -4(y - 2)^2/25[/tex]

Therefore, the Cartesian equation in the form x = f(y) for the given parametric equations is:

[tex]x = -4(y - 2)^2/25[/tex]

for such more question on Cartesian equation

https://brainly.com/question/4906890

#SPJ11

The function that satisfies the given conditions is:

y(x) = √((x² - 49) / 7)

To solve for y(x), we can use the separation of variables.

Starting with 7yy′=x, we can rearrange and integrate both sides:

∫7y dy = ∫x dx

Simplifying, we get:

7y² / 2 = x² / 2 + C

where C is the constant of integration.

To solve for C, we can use the initial condition y(7) = 7:

7y² / 2 = 49 / 2 + C

C = 7y² / 2 - 49 / 2

Substituting this back into our equation, we get:

7y² / 2 = x² / 2 + 7y² / 2 - 49 / 2

Simplifying:

y² = (x² - 49) / 7

Taking the square root of both sides:

y = ± √((x² - 49) / 7)

However, we know that y(7) = 7, so we can use this to determine which square root to choose:

y = √((x² - 49) / 7)

Therefore, the function that satisfies the given conditions is:

y(x) = √((x² - 49) / 7)

learn more about integration.

https://brainly.com/question/18125359

#SPJ11

Value | Comparison

x = -1 | Greater for Function R

x = 0 | Same for both functions

x = 1 | Same for both functions

x = 2 | Greater for Function Q

To determine whether each value is greater for Function Q, the same for both functions, or greater for Function R, we need to substitute the given values of x into the equations of both functions and compare the resulting values.

The given functions are:

Q: y = 3x - 2

R: y = x^2

For each value of x, we substitute it into both functions and compare the resulting values of y.

For x = -1:

Q: y = 3(-1) - 2 = -5

R: y = (-1)^2 = 1

The value of y for Function R (1) is greater than the value of y for Function Q (-5). Therefore, it is Greater for Function R.

For x = 0:

Q: y = 3(0) - 2 = -2

R: y = (0)^2 = 0

The value of y for both functions is the same (0). Therefore, it is Same for both functions.

For x = 1:

Q: y = 3(1) - 2 = 1

R: y = (1)^2 = 1

The value of y for both functions is the same (1). Therefore, it is Same for both functions.

For x = 2:

Q: y = 3(2) - 2 = 4

R: y = (2)^2 =

The value of y for Function Q (4) is greater than the value of y for Function R (4). Therefore, it is Greater for Function Q.

In summary:

For x = -1, the value is Greater for Function R.

For x = 0 and x = 1, the values are Same for both functions.

For x = 2, the value is Greater for Function Q.

For more such questions on Function , click on:

https://brainly.com/question/29425948

#SPJ8

The area of the sector bounded by the arc GJ is 25.97 square feet

From the question, we have the following parameters that can be used in our computation:

Diameter  = 23 feet

Also, we have

Central angle bounded by arc GJ = 1/16 * 360

So, we have

Central angle bounded by arc GJ = 22.5

The area of the sector bounded by the arc GJ is then calculated as

Area = Central angle/360 * πr²

This gives

Area = 22.5/360 * π * (23/2)²

Evaluate

Area = 25.97

Hence, the area of the sector bounded by the arc GJ is 25.97 square feet

Read more about sector area at

https://brainly.com/question/22972014

#SPJ1

The accounting equation can be used to reflect the changes in financial position resulting from business transactions.

a. The amount of retained earnings as of December 31, year 1, can be calculated as follows;

Equation for Retained Earnings is;

Retained Earnings (RE) = Beginning RE + Net Income - Dividends paid

On December 31, Year 1, the beginning RE was zero.

Hence, Retained Earnings (RE)

= 0 + Net Income - Dividends paid

Net Income = Total revenue - Total expenses

= $30,000 - $17,000

= $13,000

Dividends paid = $2,400

Retained Earnings (RE)

= 0 + $13,000 - $2,400

= $10,600

b. The accounting equation is

Assets = Liabilities + Equity

On December 31, Year 1, the balance sheet of Moss Company was;

Assets Cash = $150,000

Liabilities Notes Payable = $85,000

Equity Common Stock = $51,800 + Retained Earnings = $10,600

Total Equity = $62,400

Accounting Equation Assets = Liabilities + Equity

$150,000 = $85,000 + $62,400

c. Record the beginning account balances, revenue, expense, and dividend events under the accounting equation.

The balance sheet equation (Assets = Liabilities + Equity) can be used to record the transaction.

Moss Company's balance sheet on December 31, Year 1, was Assets Cash = $150,000

Liabilities Notes Payable = $85,000

Equity Common Stock = $51,800 + Retained Earnings = $10,600

Total Equity = $62,400

Revenue Cash revenue = $30,000

Expenses Cash expenses = $17,000

Dividends Dividends paid = $2,400

Updated accounting equation can be:

Assets Cash = $163,000 ($150,000 + $30,000 - $17,000 - $2,400)

Liabilities Notes Payable = $85,000

Equity Common Stock = $51,800

Retained Earnings = $12,600 ($10,600 + $13,000 - $2,400)

Total Equity = $64,400 ($51,800 + $12,600)

Therefore, the accounting equation can be used to reflect the changes in financial position resulting from business transactions.

To know more about financial visit:

https://brainly.com/question/28319639

#SPJ11

The probability of data loss in RAID 0 is high. It is not advised to keep important data on it.

RAID 0, also known as "striping," is a data storage method that utilizes multiple disks. It divides data into sections and stores them on two or more disks, allowing for faster access and higher performance. RAID 0's primary purpose is to enhance read and write speeds and increase storage capacity, rather than data protection.

Since RAID 0 is a non-redundant array, the probability of data loss is high. If one drive fails, the entire array will fail, and all data stored on it will be lost. When two disks are used in RAID 0, the probability of failure increases because if one drive fails, the entire RAID 0 array will fail. RAID 0 provides no redundancy, and it is considered dangerous to store critical data on it. RAID 0 should only be used in situations where speed and performance are more important than data safety.

In conclusion, the probability of data loss in RAID 0 is high. Therefore, it is not recommended to store critical data on it.

To know more about probability Visit :

https://brainly.com/question/32117953

#SPJ11

The surface area of the balloon is increasing at a rate of 5 square centimeters per second when the radius is 5 cm.

A) We know that the volume of a sphere is given by:

V = (4/3)πr^3

Taking the derivative of both sides with respect to time, we get:

dV/dt = 4πr^2 (dr/dt)

where dV/dt is the rate of change of volume (which is 10 cubic centimeters per second in this case), dr/dt is the rate of change of radius, and 4πr^2 is the surface area of the sphere.

Rearranging the equation, we get:

dr/dt = (1 / (4πr^2)) dV/dt

Substituting dV/dt = 10 cubic centimeters per second, we get:

dr/dt = (1 / (4πr^2)) (10) = (5 / (2πr^2)) cubic centimeters per second

Therefore, the expression for the rate at which the radius of the balloon is increasing is dr/dt = (5 / (2πr^2)) cubic centimeters per second.

B) When the diameter is 40 cm, the radius is 20 cm. We can use the expression we derived in part (A) to find the rate at which the radius is increasing:

dr/dt = (5 / (2πr^2)) cubic centimeters per second

Substituting r = 20 cm, we get:

dr/dt = (5 / (2π(20^2))) cubic centimeters per second

dr/dt ≈ 0.00198 cm/s (rounded to 5 decimal places)

Therefore, the radius of the balloon is increasing at a rate of approximately 0.00198 cm/s when the diameter is 40 cm.

C) When the radius is 5 cm, the surface area of the sphere is given by:

A = 4πr^2

Taking the derivative of both sides with respect to time, we get:

dA/dt = 8πr (dr/dt)

We can use the expression we derived in part (A) to find the rate at which the radius is increasing:

dr/dt = (5 / (2πr^2)) cubic centimeters per second

Substituting r = 5 cm and dr/dt = (5 / (2πr^2)) cubic centimeters per second, we get:

dA/dt = 8π(5) ((5 / (2π(5^2))))

dA/dt = 5 cubic centimeters per second

Therefore, the surface area of the balloon is increasing at a rate of 5 square centimeters per second when the radius is 5 cm.

Learn more about radius here

https://brainly.com/question/27696929

#SPJ11

The proportion of observations that fall within is k standard deviations from the mean, the correct option is B.

We are given that;

The number k>1

Now,

The mean is the average value which can be calculated by dividing the sum of observations by the number of observations

Mean = Sum of observations/the number of observations

Chebyshev’s theorem states that for any number k > 1, at least (1 - 1/k^2) of the observations in any data set are within k standard deviations from the mean. k standard deviations from the mean.

Therefore, by mean the answer will be k standard deviations from the mean.

Learn more about mean and median;

https://brainly.com/question/17060266

#SPJ12

The expression that represents the final price of a dishwasher, with the discount and taxes applied is d[c(p)] = 0.8555d.

Explanation: Given that Dishwashers are on sale for 25% off the original price (d),

which can be expressed with the function p(d) = 0.75d,  

local taxes are an additional 14% of the discounted price, which can be expressed with the function c(p)

= 1.14p.

We need to find the expression that represents the final price of a dishwasher, with the discount and taxes applied.

We have c(p) = 1.14p is the expression for local taxes and we know that p(d) = 0.75d is the expression for 25% off the original price,

and c[p(d)] = 0.855p represents both the discount and the tax applied to the original price, that is, 25% discount and 14% tax.

So, we can also express the final price in terms of the original price d by substituting p with 0.75d,

we get: c[p(d)] = 0.855p

= 0.855(0.75d)

= 0.64125d

Therefore, the expression that represents the final price of a dishwasher,

with the discount and taxes applied is d[c(p)]

= 0.8555d.

Hence, the answer is d[c(p)] = 0.8555d.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11