Answer:
As the cars ascend the next hill, some kinetic energy is transformed back into potential energy. Then, when the cars descend this hill, potential energy is again changed to kinetic energy. This conversion between potential and kinetic energy continues throughout the ride.
Explanation:
hope it helps U
Topic : Collisions and Conservation of Momentum
1. A 0.2 kg ball moves to the right with a speed of 3 m/s. It hits a 0.5 kg ball, which is at rest? After the collision, the second ball moves to the right with a speed of 1 m/s. What is the speed of the first ball after the collision?
2. A 1000 kg rocket carrying 25 kg of fuel and oxygen rises at a velocity of 305 m/s. If all the mass of fuel and oxygen is burned to form gases of combustion, what is the downward velocity of these gases?
Why is a strong skeletal system important for leading an active lifestyle?
Answer:
Explanation:
Because if you don't have strong bones, you will have problems with your health. So, a strong skeletal system is important for leading a healthy life.
Examine the image below:
Which term describes the wave phenomenon in the image?
Answer:
C
Explanation:
Reflection.
ions, giving canoe 1 a speed of 0.58 m>s and canoe 2 a speed of 0.42 m>s. If the
Answer:
Draw a table showing the different forms of the first law for the four processes described.
I WILL MARK BRAINLIEST IF YOU ANSWER THIS PHYSICS QUESTION!!!
A 21 kg child is riding a 5.9 kg bike with a velocity of 4.5 m/s to the northwest.
1. What is the momentum of the child and the bike together?
2. What is the momentum of the child?
3. What is the momentum of the bike?
Answer:
1. 121.05 kg m/s NW
2. 94.5 kg m/s NW
3. 26.55 kg m/s NW
Explanation:
Justina dreamed last night that she was warding off villains in a life or death battle outside a fortified castle. In the dream, she attempted to cross the moat but saw that it was filled with grotesque swamp creatures with warty green skin and she recoiled in fear. Knowing there was only one way to reach safety, she flew over the top of the castle and landed among the weeds in the inner courtyard. She was surprised to run into her seventh period Geometry teacher, Ms. Hargroves, but seeing that her teacher had a spear, compass, and workbook with her, Justina knew they would prevail. Ms. Hargroves told Justina that the key to defeating the villains was to write the theorems from the homework on the castle walls as protection against the invaders. Justina scrambled to write the complicated theorems before the menacing villains closed in. Just when the towering castle walls were about to be sieged, Justina awoke from her dream with a start.
As a therapist who specializes in dreams, who would you interpret Justina’s dream using:
17. Freud’s wish-fulfilling theory:
18. The information-processing theory:
19. The physiological function theory:
20. The activation synthesis theory:
21. The cognitive development theory:
As a therapist who specializes in dreams, I would interpret Justina’s dream by using: 17. Freud’s wish-fulfilling theory.
Who is Sigmund Freud?Sigmund Freud was an Austrian physiologist, neurologist, medical doctor and the founder of psychoanalysis. Also, Freud was born in Moravia on the 6th of May, 1856 and he was famously known around the world for his works on psychoanalytic theory of personality development.
In 1923, Sigmund Freud developed the personality theory through which he strongly argued that a person’s personality (human psyche) is structured into three (3) key parts and these include:
The Id (instincts).Ego (reality).Superego (morality).According to Sigmund Freud, wish fulfillment simply means the satisfaction of a human desire through an involuntary thought process such as dreams. Thus, it typically happens to a person when unconscious desires are adequately repressed by both the ego and superego.
Read more on wish fulfillment here: https://brainly.com/question/13409626
Which statements accurately describe mechanical waves? Check all that apply.
A. Energy is transferred through vibrating particles.
B. A mechanical wave does not carry energy through matter.
C. A longitudinal wave is a type of mechanical wave.
D. A transverse wave is a type of mechanical wave.
E. An ocean wave moving through water is an example of a mechanical wave.
Answers:
A.
C.
D.
E.
I already did this
Edge 2022
Answer:
A
Explanation:
E. An ocean wave moving through water is an example of a mechanical wave
e.g sound waves wave on a rope or string
and Ans a is also correct
In mechanical waves, the energy is transferred through the vibration of the particles.
Mechanical waves are the type of waves that transfers energy through the vibration of particles. Since, mechanical waves require a medium to transfer energy, they carry energy through matter.
Both longitudinal and transverse waves are two types of mechanical waves.
It is known that mechanical waves propagate through medium like matter, water, etc. Therefore, an ocean wave moving through water is an example of a mechanical wave.
To learn more about mechanical waves, click:
https://brainly.com/question/24459019
#SPJ2
Which musical instrument uses resonance?
flute
drums
bongos
electric keyboard
Answer:
It's A: Flute!
The gauge pressure in a balloon in measured by means of an open-tube manometer that uses water (density=1.00×103 kg/m3) . What gauge pressure is indicated by a difference of 0.0171 m in the heights of the water columns?
The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.
Gauge pressure of the balloon
The gauge pressure in the balloon is the pressure inside the balloon due to the water columns relative to the atmospheric pressure.
The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is calculated as follows;
P = ρgΔh
P = (1,000)(9.8)(0.0171)
P = 167.58 Pa
Thus, the gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.
Learn more about gauge pressures here: https://brainly.com/question/6984092
Hold a spoon such that the water will hit the back of the spoon. The handle of the spoon will be horizontal. Turn on the water, but not full strength though.
This is an experiment that explains the Bernoulli principle. According to this principle, at the bottom of the spoon, there will be a reduction in pressure.
Explanation of the Bernoulli principleSo the pressure at the bottom of the spoon reduces because the velocity of the water is larger and the height of the column of water is smaller at this part.
So the spoon is attracted to the water at the point of lowest pressure because objects gravitate to low-pressure points.
Learn more about the Bernoulli Principle at:
https://brainly.com/question/24623919
what is the constant snell’s law
Snell's law is defined as “The ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant, for the light of a given colour and for the given pair of media”.
Which of the following is NOT an example of force. A. Gravity. B. Mass. C. A push. D. Friction.
Answer:
Mass
Explanation:
Gravity is a force (sort of keeping something in place)
A push is force (force pushing something)
Friction is force (force that resists sliding or rolling)
A student is standing at a distance of 45 m from a wall. He gives a loud clap at the echo is heard 0.3a later. Calculate the speed of sound.
Answer:
300 m/s
Explanation:
2d = vt
v = 2d/t
v = 2×90/.3
v=300 m/s
d = distance
t = time
v = velocity/speed of sound
how can you find the reading of main scale and vernier scale
Answer:
this pdf should help you out
Explanation:
. A rope is being used to pull a mass of 10 kg vertically upward. Determine the tension on the rope, if starting from rest, the mass acquires a velocity of 4 ms-1 in 8s [g= 10ms-2]
[tex]\text{Given that,}\\\\\text{Mass, m =10 kg}\\\\\text{Time, t = 8 sec}\\\\\text{Velocity, v = 4~m/s}\\\\\text{When a body is moving upwards,}\\\\\text{Tension,}~ T=mg +ma\\\\~~~~~~~~~~~~~~~=mg+m\left(\dfrac{v-u}t \right)\\\\~~~~~~~~~~~~~~~=10(10)+10\left(\dfrac{4-0}8\right)\\\\~~~~~~~~~~~~~~~=100+10\left(\dfrac 12\right)\\\\~~~~~~~~~~~~~~~=100+5\\\\~~~~~~~~~~~~~~~=105~N[/tex]
How do human population growth trends differ between developed nations and developing nations?
Answer:
Replacement-Level Fertility
Another important population characteristic that differ btw develop nation and developing nations is relates to births is replacement-level fertility. Replacement-level fertility is the fertility rate that will result in the replacement of the parents in the population. Again, in an ideal world, the human replacement-level fertility rate would be exactly two. This would mean that each couple would produce two offspring that would replace them in the population. If this occurred, then the human population would stay at a stable rate
A proton moves north with a speed of 3 x 10^6 m/s. A 5 Tesla magnetic field is directed west. Determine the magnitude and direction of the magnetic field on the proton.
The magnitude of magnitude force on the proton is 2.4 x 10⁻¹² N.
Magnitude of magnetic force on the protonThe magnitude of magnitude force on the proton is calculated as follows;
F = qvB sinθ
where;
q is the charge of the protonv is the speed of the protonB is the magnitude of the magnetic filed θ is the angle between the field and speedSubstitute the given parameters and solve for the magnetic force.
F = (1.6 x 10⁻¹⁹) x (3 x 10⁶) x (5) X(sin90)
F = 2.4 x 10⁻¹² N
Thus, the magnitude of magnitude force on the proton is 2.4 x 10⁻¹² N.
Learn more about magnetic force here: https://brainly.com/question/13277365
Explain newtons's law of gravitation
Newton's law of universal gravitation is typically stated that every particle attracts every particle in the universe with force that is directly proportional to the result of their masses and inversely proportional to the square of distance between their centers.
give the mathematical expression for coulombs force if q1,q2 are the magnitude of charges and r is the distance between them.
Give the mathematical expression for coulomb's force if q1, q2 are the magnitude of charges and r is the distance between them.
F=K q1q2/r2
A pendulum bob has it maximum speed at 3ms at the lowest position 0. Calculate the height of the bob above 0,where it velocity is 0
Hello!
We know that at the BOTTOM of the pendulum's trajectory, the bob has a maximum speed. This means that its KINETIC ENERGY is at a maximum, while its Gravitational POTENTIAL ENERGY is at a minimum.
On the other hand, when the bob is at its highest points, the bob has a velocity of 0 m/s, so its KE is at a minimum and its PE is at a maximum.
We can use the work-energy theorem to solve. Let the Initial Energy equal the bob's energy at one of the sides, while the final Energy equals the bob's energy at the bottom.
[tex]E_i = E_f\\\\PE = KE[/tex]
Recall that:
PE = mgh
m = mass (kg)
g = acceleration due to gravity (m/s²)
h = height (m)
KE = 1/2mv²
m = mass (kg)
v = velocity (m/s)
Set the two equal and solve for 'h'.
[tex]mgh = \frac{1}{2}mv^2[/tex]
Cancel mass.
[tex]gh = \frac{1}{2}v^2[/tex]
Solve for 'h'.
[tex]h = \frac{v^2}{2g}\\\\h = \frac{3^2}{2(9.8)} = \boxed{0.459 m}[/tex]
A women runs a kilometer using a of 210N and a pwower output of 500W how long does it take this woman to complete 1 kilometer
Answer:
7 minutes
Explanation:
Explanation:
Power = work / time
Power = force × distance / time
500 W = 210 N × 1000 m / t
t = 420 s
t = 7 min
Which statement correctly describes the relationship between frequency and wavelength?
A :As the frequency of a wave increases, the longer its wavelength is
B: As the frequency of a wave increases, the shorter its wavelength is.
C: As the frequency of a wave increases, its wavelength remains the same.
Answer:
It is B
Explanation:
Option B talks about how the frequency of the wave increases the shorter it's wavelengths
Answer:
It's b
Explanation:
help me get a answer
Answer:
I think D sorry if I'm wrong
In question 8 from “Problems 2”, you calculated that an archery arrow shot with an initial velocity of 45 m/s at an angle of 10 degrees would travel 70.67 m (2 d.p.) before hitting a target at the same height from which it was released. If the archery target was moved further away from the archer, discuss some kinematic-based strategies that the archer could adopt to ensure that the arrow reaches the target. Ensure that the variables discussed are relevant to your answer. Assume air resistance is negligible.
The distance traveled by the arrow and horizontal velocity are directly proportional, thus when the distance increases, an increase in initial velocity will allow the arrow to hit the target.
Time of motion of the projectileIf the horizontal distance the projectile would travel before hitting the target is 70.67 m, the time of motion of the projectile is calculated as;
X = Vx(t)
t = X/Vx
t = X/Vcosθ
t = (70.67) / (45 x cos10)
t = 1.6 s
When the archery target is moved further away from the archer, the archer needs increase the initial velocity of the arrow assuming the angle of projection is constant.
Since the distance and horizontal velocity are directly proportional to each other, thus when the distance increases, an increase in initial velocity will allow the arrow to hit the target.
Learn more about velocity of projectile here: https://brainly.com/question/12870645
Define the lower fixed point of thermometer
Answer:
The temperature of pure melting ice at normal atmospheric pressure is known as the lower fixed point of thermometer
The lower fixed point of a thermometer is the temperature of a pure melting ice at atmospheric pressure of 1 atm
What is a thermometer?A thermometer is an instrument used in measuring temperature. iThermometers usually have toe fixed ponts the upper fixed pont and the lower fixed point.
The lower fixed point corresponds to the temperature of a pure melting ice at 1 atm
1 atm is normal atmospheric pressure and equal to 101325 Pa
Which of the following is an arithmetic sequence? A. 2, 1, 4, 3, 6, 5, …
Explanation:
it is not a arithmetic sequence
3,0,-3,-6 is the correct arithmetic sequence. So, the correct option is C.
What is Arithmetic sequence?An arithmetic sequence is defined as a sequence where the common difference between any two consecutive terms is constant. A sequence is explained as a collection of numbers that follow a pattern such as the sequence 2, 7, 12, 17, ... is an arithmetic sequence as there is a pattern where each number is obtained by adding 5 to its previous term. Is performed.
For above given information,
3,0,-3,-6 is the correct arithmetic sequence.
as, d is called as the common difference of the series
d=0 - 3= - 3 - 0 = -6 - (-3)
d= - 3
An arithmetic sequence is called as the equal common difference in each progressive term.
Thus, 3,0,-3,-6 is the correct arithmetic sequence. So, the correct option is C.
Learn more about Arithmetic sequence, here:
https://brainly.com/question/15412619
#SPJ2
Your question is incomplete, most probably the complete question is:
Which of the following is an arithmetic sequence?
a.2,4,16,32
b.2,3,7,1,
c.3,0,-3,-6
d.5,-5,5,-5
A child pushes a toy truck up an inclined plane. The lifting force is...
Select one:
a. the weight of the truck.
b. the length of the inclined plane.
c. the force the child uses to push the truck.
d. equal to the total amount of work done.
The lifting force when a child pushes a toy truck up an inclined plane is equal to the total amount of work done.
Work-energy theorem
The work-energy theroem states, the work done on an object is equal to the change in mechanical energy of the object.
The net force applied by the child on the truck, will create a lifting force on the object.
Fd - Ffd = k.E
Where;
Fd is the work done by the childFfd is the work done by frictionK.E is the kinetic energy of the truckThus, the lifting force when a child pushes a toy truck up an inclined plane is equal to the total amount of work done.
Learn more about work-energy theorem here: https://brainly.com/question/22236101
why do badminton players use rubber shoes while playing
Badminton shoes are specifically designed for badminton footwork and movement. Rubber that is anti-slip and wear-resistant is ideal for the soles of badminton shoes, while the midfoot area requires excellent shock-absorption and resilience
Answer:
It's the perfect shoe to wear on the fields they play on like so they don't slip
the taipei 101 in taiwan is a 1667-foot tall, 101-story skyscraper. the skyscraper is the home of the world's fastest elevator. the elevators transport visitors from the ground floor to the observation deck on the 89th floor at speeds up to 16.8 m/s. determine the power delivered by the motor lift the 10 passengers at this speed. the combined mass of the passengers and cabin is 1250 kg
The power delivered by the motor lift in elevating the 10 passengers at the speed of 16.8 m/s is 205800 Watts
What is power?Power is simply defined as the rate at which energy is consumed. It can be expressed mathematically as
Power (P) = Force (F) × velocity (v)
P = Fv
How to determine the force Mass (m) = 1250 KgAcceleration due to gravity (g) = 9.8 m/s²Force (F) =?F = ma
F = 1250 × 9.8
F = 12250 N
How to determine the power Velocity (v) = 16.8 m/sForce (F) = 12250 NPower (P) =?P = Fv
P = 12250 × 16.8
P = 205800 Watts
Learn more about power:
https://brainly.com/question/5684937
An experiment is set up as follows:
A mass m = 9.4kg is sent down a frictionless ramp with an initial velocity of 2.5m/s. The ramp is 87cm
long and has an angle of 36°above the horizontal. At the bottom of the ramp is a horizontal surface with a
kinetic friction coefficient of μk = 0.27. At the far side of the horizontal surface, 48cm away, is a spring with
k-constant ks = 3,413.7N
m that will be compressed as the mass collides with the spring. The experiment
ends as the spring is fully compressed and the mass is at rest.
Note: The distance that the spring is compressed is in addition to the 48cm.
7) Find the initial energy of the mass. (10pts)
8) How far will the spring compress if there is no surface friction under the spring? (10pts)
9) How far will the spring compress if the surface friction continues under the spring? (20pts)
(a) The initial energy of the mass is 76.485 J.
(b) The compression of the spring in the absence of friction is 21.2 cm.
(c) The compression of the spring in the presence of friction is 19.4 cm.
Initial energy of the massThe initial energy of the mass is determined as follows;
E = K.E + P.E
E = ¹/₂mv² + mgh
where;
h is the height of the rampE = ¹/₂mv² + mg x Lsinθ
P.E = ¹/₂(9.4)(2.5)² + (9.4)(9.8)(0.87)(sin36)
P.E = 76.485 J
Compression of the spring when there is no surface tensionThe compression of the spring in the absence of friction is calculated as follows;
Ux = E
¹/₂kx² = 76.485
kx² = 2(76.485)
x² = (2 x 76.485)/k
x = √(2 x 76.485)/k
x = √(2 x 76.485 / 3413.7)
x = 0.212 m
x = 21.2 cm
Compression of the spring in presence of frictionThe compression of the spring in the presence of friction is determined by applying the principle of conservation of energy.
E - Fd = Ux
E - μmgd = ¹/₂kx²
76.11 - (0.27 x 9.4 x 9.8 x 0.48) = ¹/₂(3413)x²
64.17 = 1706.5x²
x² = 0.0376
x = √0.0376
x = 0.194
x = 19.4 cm
Learn more about conservation of energy here: https://brainly.com/question/166559