How does the amplitude of the wave change as you get farther from the speaker?

Answers

Answer 1

Answer:

The sound is perceived as louder if the amplitude increases, and softer if the amplitude decreases. ... As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder.


Related Questions

a guitar string transmits waves at 509 m/s. to create a 491 Hz note, to what length should the guitar player shorten the string?

Answers

Answer:

Wavelength = 1.04 meters

Explanation:

Given the following data;

Speed = 509m/s

Frequency = 491Hz

To find the wavelength;

Wavelength = speed/frequency

Wavelength = 509/491

Wavelength = 1.04 meters

Therefore, the guitar player should shorten the length of the string to 1.04 meters.

Answer: 0.52

Explanation:

A vertical piston cylinder assembly contains 10.0kg of a saturated liquid-vapor water mixture with initial quality of 0.85 The water receives energy by heat transfer until the temperature reaches 320*C. The piston has a mass of 204kg and area of 0.005m2. Atmospheric pressure of 100kPa acts on the top side of the piston. Local gravitational acceleration is 9.81m/s2 Calculate the amount of heat transfer between the water and the surroundings in kJ. Enter a numeric value only. 6735.66

Answers

Answer:

Explanation:

From the given information:

At state 1:

Initial Quality [tex]= x_1 = 0.85[/tex]

mass = 10.0 kg

At state 2:

Temperature [tex]T_2 = 320^0[/tex]

mass of the piston [tex]m_p = 204 \ kg[/tex]

area of the piston [tex]A_p = 0.00 5 \ m^2[/tex]

Atmospheric pressure [tex]P_{atm}= 100 \ kPa = 100 \times 10^3 \ Pa[/tex]

Gravitational acceleration = 9.81 m/s²

[tex]\mathbf{P= P_1=P_2}[/tex], This is because there exists no restriction to the movement of the piston and provided the process is frictionless. So, the process 1-2 is regarded as constant.

To calculate the applying force balance over the piston by using force balance in the vertical direction:

[tex]\mathbf{P_{AP} = P_{atmA_p} + m_pg}[/tex]

(100 × 10³)×0.005 + 204 × 9.31 = P × 0.05

P = 500248 Pa

P = 500.25 kPa

At state 1:

[tex]\mathbf{P_1 = P = 500.25 \ kPa}[/tex]

[tex]x_1 = 0.85[/tex]

Hence, this is a saturated mixture of liquid and vapor

Using the steam tables at 500.25 kPa

[tex]V_f = 1.093 \times 10^{-3} \ m^3/kg \\ \\ V_g = 0.375 \ m^3/kg \\ \\ U_f = 639.72 \ kJ/kg \\ \\ U_g = 2560.72 \ kJ/kg[/tex]

Specific volume at state 1 is given as:

[tex]V_1 = [ V_f +x_1(v_g -v_f) ] \ at \ 500.25 \ kPa \\ \\ V_1 = 0.319 \ m^3/kg[/tex]

volume at state 1 is given by:

[tex]V_1 = mV_1 = 10 \times 0.319 \\ \\ V_1 = 3.19 \ m^3[/tex]

Similarly, the specific internal energy is:

[tex]U_1 = [U_f +x_1 (U_o-Uf)] \ at \ 500.25 \ kPa[/tex]

[tex]U_1 = 639.72 +0.82 (2560.72 -639.72)[/tex]

[tex]U_1 = 2272.57 \ kJ/kg[/tex]

At state 2:

[tex]P = P_1 = P_2 = 500.25 \ kPa \\ \\ T_2 = 320^0 \ C[/tex]

Using steam tables at P = 500.25 kPa and T = 320° C

[tex]V_2 = 0.541 \ m^3/kg \\ \\ U_2 = 2835.08 \ kJ/kg[/tex]

[tex]V_2 = mV-2 = 10 \times V_2 = 5.41 \ m^3[/tex]

[tex]\text{Now; Applying the 1st law of thermodynamics to the system}[/tex]

[tex]_1Q_2 -_1W_2 = \Delta V =m(u_2-u_1) \\ \\ where;\ _1W_2 = P(V_2-V_1) \\ \\ _1Q_2 -P(V_2-V_1) = m(u_2-u_1) \\ \\ _1Q_2 - 500.25(5.91 -3.19) = 10( 2835.08 -2272.57) \\ \\ \mathbf{ _1Q_2 = 6735.66 \ kJ}[/tex]

Physics help, thank you guys so much!

Answers

Answer:

 Δt = 5.85 s

Explanation:

For this exercise let's use Faraday's Law

           emf = [tex]- \frac{d \phi}{dt}[/tex] -  d fi / dt

           [tex]\phi[/tex] = B. A

           \phi = B A cos θ

The bold are vectors. It indicates that the area of the body is A = 0.046 m², the magnetic field B = 1.4 T, also iindicate that the normal to the area is parallel to the field, therefore the angle θ = 0 and cos 0 =1.

suppose a linear change of the magnetic field

            emf = - A [tex]\frac{B_f - B_o}{ \Delta t}[/tex]

             Dt = - A  [tex]\frac{B_f - B_o}{emf}[/tex]

the final field before a fault is zero

       

let's calculate

            Δt = - 0.046 (0- 1.4) / 0.011

            Δt = 5.85 s

The rate at which work is done is known as which of the following?
A. Power,
B. Energy,
C. Momentum,

Answers

Answer:

A , power

Explanation:

Hope this is useful. Have a lovely rest of your day! God bless you.

The chemical equation for the decomposition of potassium chlorate into potassium chloride and oxygen gas is
KCIO: |_ KCI + ___ 02
Which coefficients correctly balances the equation?
A) 4.4,3
B 3,3,2
C) 2,2,3
D
2, 1,3
E The equation is already balanced.

Answers

Answer:

Option C. 2, 2, 3

Explanation:

__KClO₃ —> __ KCl + __O₂

The above equation can be balance as illustrated below:

KClO₃ —> KCl + O₂

There are 2 atoms of O on the right side and 3 atoms on the left side. It can be balance by writing 2 before KClO₃ and 3 before O₂ as shown below:

2KClO₃ —> KCl + 3O₂

There are 2 atoms of K on the left side and 1 atom on the right side. It can be balance by writing 2 before KCl as shown below:

2KClO₃ —> 2KCl + 3O₂

Thus, the equation is balanced. The coefficients are: 2, 2, 3

1. What does the Work-Energy Theorem state?
Work is equal to the change in kinetic energy
Work is equal to the change in momentum
Work is equal to the change in impulse
Work is equal to the change in position

Answers

The principle of work and kinetic energy (also known as the work-energy theorem) states that the work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. ... Kinetic Energy: A force does work on the block. So the answer would be the first one.

The Work-Energy Theorem states that Work is equal to the change in kinetic energy, which is the first option . This theorem is an essential principle in physics and mechanics, so first option is correct.

Work (W) is a measure of the energy transferred to or from an object by a force acting on it. It is defined as the product of the force applied to the object and the displacement of the object in the direction of the force. When a force does positive work on an object, it transfers energy to the object, increasing its kinetic energy. Conversely, when a force does negative work on an object (opposite to its direction of motion), it takes energy away from the object, decreasing its kinetic energy. So, first option is correct.

Learn more about the work-energy theorem here.

https://brainly.com/question/30560150

#SPJ6

Which type of electricity is a one-time event, caused by unbalanced charges trying to become neutral again?

Answers

Answer: yes

Explanation:

Which of the following is an example of kinetic mechanical energy?
Immersive Reader
(2 Points)

A. A bike rolling down a hill

B. An elevated wrecking ball

C. A compressed spring

D. A loaded gun

E. A set mouse trap

Answers

Answer:

A

Explanation:

Kinetic energy must be moving. Potential energy has the ability to move but is not doing so at the moment.

A is likely the answer. But there's lots involved in that kind of motion.

B If the ball is elevated, it implies it is not moving yet. It has potential energy.

C Again, the spring is compressed. It will push something when it moves, but it is not moving yet.

D The load gun's bullet is not moving. It's still potential energy.

E. The mouse trap is set, but it is not moving. When the mouse eats the bait then it's potential energy will transform into kinetic energy.

In a thunderstorm at 32.0°C, Reginald sees a bolt of lightning and hears the thunderclap 2.00s later. How far from Reginald did the lightning strike? The speed of sound through air at 32.0°C is 350.2 m/s. Show your work.
PLEASE HELP, THANKS!​

Answers

Answer:

d = 700.4 m

Explanation:

Given that,

The speed of sound through air at 32.0°C is 350.2 m/s.

Reginald sees a bolt of lightning and hears the thunderclap 2.00s later.

We need to find how far from Reginald did the lightning strike. Let the distance be d. So,

Speed = distance/time

d = vt

So,

d = 350.2× 2

d = 700.4  m

So, the required distance is 700.4  m.

Which would be a good analogy of wave motion

Answers

I think (C )
----------------

Answer:

i believe it would be C

Explanation:

A centrifuge is a device used to separate materials by their masses. A sample in a centrifuge is rotated at high speeds along a circular path a distance of 10.0 cm from the center of the centrifuge. A centrifuge constantly accelerates a 1.00-gram sample from rest to a speed of 1,000 revolutions per minute in 1.00 seconds. Eventually, the sample reaches a speed 10.5 m/s. What is the magnitude and direction of the centripetal force acting on the sample

Answers

Answer:

 F = 1.047 10⁻² N

Explanation:

Let's use kinematics to find the angular acceleration

             w = w₀ + α t

as for rest w₀ = 0

             w = α t

             α = w / t

let's reduce the magnitudes to the SI system

              w = 1000 rev / min (2π rad/ 1 rev) (1 min/ 60s) = 104.72 rad / s

              m = 1.00 g (1 kg / 1000 g) = 1,000 10⁻³ kg

              r = 10.0 cm (1 m / 100 cm) = 0.100 m

let's calculate

              α = 104.72 / 1

              α = 104.72 rad / s²

angular and linear variables are related

               a = α  r

               a = 104.72 0.100

               a = 10.47 m / s²

finally we substitute in Newton's second law

               F = 1 10⁻³ 10.47

               F = 1.047 10⁻² N

(iii) Gareth cycles 5 laps at this constant spoed. Each lap is 500m.
Calculate the distance he travels.
I
Distance

Answers

Answer:

2500 m

Explanation:

Given that,

Each lap is 500 m

Gareth takes 5 laps.

We need to find distance traveled by Gareth. The distance covered by him is given by :

d = 5×500

d = 2500 m

Hence, he will travel 2500 m.

a force is applied to the right to drag a sled to the right across Loosely packed snow with a rightward acceleration (considered friction forces)​

Answers

Answer:

1.67 m/s²

Explanation:

Total force is;

ΣF = F_f + F_a

From the free body diagram attached, we see that the frictional force F_f is acting in a negative direction.

Thus;

ΣF = -15 + 30

ΣF = 15 N

Now, to get the acceleration, we will use the formula;

ΣF = ma

We are given m = 9 kg

Thus;

15 = 9a

a = 15/9

a = 1.67 m/s²

A truck of mass 1600 kg is traveling at 15 m/s. In order to avoid running over a squirrel in the middle of the road, the truck driver begins to brake. What must the braking force on the truck be if the truck comes to stop in 2 s? *


a)12000n
b) 8000n
c)7000n
d)6000n

Answers

I think A is correct

a.
2. The following examples are good conductors except:
a. Silver
b. Metal
Plastic
d. Copper ​

Answers

Copper!! Because batteries need copper to operate!!

Answer:

plastic

Explanation:

The idea is to get as much EMF produced from the sprinter running through it. If you were the Olympic coach on a year when there happens to be a global energy crisis, and medals were assigned based on how much EMF (or current) were produced by the sprinters, what 3 pieces of advice (one is quite obvious; the other two involve the fixed orientation of the baton and the maintained position of the baton within the circular solenoid cross-section) would you give your sprinters in order to win?

Answers

Answer:

the greater the speed, the greater the electromotive force

* The metal pole must be parallel to the field

* you must keep the ball of the field

Explanation:

To determine the advice to the runners, let's use the Farad equation to and

           fem = -N [tex]\frac{ d \phi}{dt}[/tex]  = -N [tex]\frac{ B A Cos \theta }{dt}[/tex]

how the runners are moving

                 fi = B l x

            fem = -N B l v

therefore the advice we can give are:

* the greater the speed, the greater the electromotive force

* The metal pole must be parallel to the field

* you must keep the ball of the field

a skydiver is falling down through the air but has not reach terminal velocity (not consistent velocity )(considered air resistance)​

Answers

We are to find the acceleration.

Answer:

-9.2 m/s²

Explanation:

Total force is expressed as;

ΣF = F_d + F_g

We are given;

F_d = 50 N

Mass of skydiver = 78 kg

Thus, F_g = 78 × -9.8

g is negative since it is a free fall

Thus;

F_g = -764.4 N

ΣF = 50 - 764.4

ΣF = -714.4 N

Formula for acceleration is;

ΣF = ma

a = -714.4/78

a ≈ -9.2 m/s²

When individuals improve their aerobic endurance, which body systems are affected?

Answers

When individuals improve their aerobic endurance, which body systems are affected?

Anwser: your heart and lungs

How does changing the frequency affect the sound that you hear?

Answers

Answer:

It leads to a higher pitch of sound which means the sound is louder.

Explanation:

When a sound is made, it will cause vibrations to occur.

The size of these vibrations are called amplitude while their speed is called frequency.

Now, the larger the vibrations implies that we will have high amplitude such that the sound is louder, whereas, the higher the frequency, the higher the pitch of sound and vice versa.

The larger the pitch, the louder the sound and vice versa.

Thus, increasing the frequency leads to higher pitch and ultimately louder sound.

During which sequence of phases does the moon's visibility increase

Answers

During the "waxing" phases, the two weeks immediately following the New Moon.

New Moon ==> waxing crescent ==> First Quarter ==> waxing gibbous ==> Full Moon

The phase of the moon decides the moon's visibility. The sequence of phases does the moon's visibility increases is; the waxing crescent, first quarter, waxing gibbous, full Moon.

What is the moon phase?

The moon changes shape every day. This is due to the fact that the celestial body has no light of its own and can only reflect sunlight.

Only the side of the moon facing the sun can reflect this light and seem bright. The opposite side appears black. this is a full moon.

We can only see the black section when it lies between the sun and the earth when a new moon occurs. We witness intermediate phases like a half-moon and crescent in between these two extremes.

Following are the sequence of phases does the moon's visibility increase is;

1. Waxing crescent

2. First Quarter

3. Waxing gibbous

4. Full Moon

The phase of the moon decides the moon's visibility. Hence the visibility changes with the change in the phase of the moon.

To learn more about the moon's phase refer to the link;

https://brainly.com/question/2285324

NEED HELP PLEASE
ASAP
SOMEONE!!!!!!!!
TRUE OR FALSE 3 QUESTIONS
OWA OWA :3

Answers

Answer:

8. True

9. true

10. false

Explanation:

Answer:

false

true

false

the galaxies are moving away from each other, not towards each other.

An object which is dropped from a certain height has zero (0) initial velocity.

Answers

Answer:

0 m/s

Explanation:

if an object is dropped we know the initial velocity is zero when in free fall

What is the earliest time at which the oscillator shown below is stationary?

Answers

Answer:

0.0s

Explanation:

I got it right in acellus

Answer: 0.0

Explanation:

Calculate wavelength of tube of length 15, 18, 20 cm.

Answers

Answer:In this lesson, the mathematical relationship between the tube's length, the speed of sound through air, and the ... Thus, the length of the air column is equal to one-half of the wavelength for the first harmonic. ... Determine the fundamental frequency (1st harmonic) of an open-end air column that has a length of 67.5 cm.

Explanation:

A magnet produces a magnetic field.

Which diagram shows the magnetic field pattern around a bar magnet

Answers

You Forgot To Add The Pictures

an austrain who lived in vienna who composed graetest music for waltz dance

Answers

Johann Strauss II



hope this helps

A boy kicks a football with a force of 20 N, the time the force acts for is 0.3s. Calculate the impulse on the ball.

Answers

Answer:

20 * .3 = 6N

Explanation:

The impulse on the ball kicked with a force of 20 N force 0.3 s is 6 Ns

From the question given above, the following data were obtained:

Force = 20 N

Time = 0.3 s

Impulse = ?

The impulse on the ball can be obtained as follow:

[tex]impulse \: = force \: \times time \\ impulse \: = 20 \: \times \: 0.3 \\[/tex]

Impulse = 6 Ns

Therefore, the impulse on the ball is 6 Ns

Learn more: https://brainly.com/question/231466

What is the relationship between CO2 levels and temperature?

What can you infer from this? (make a guess or assumption based on the data)

Approximately what year did the concentration of CO2 first exceed 300 ppm?

Answers

Answer:

I can infer that higher levels of CO2 result in warmer temperatures. The CO2 first exceeded 300 ppm in 1950.

Let me know if this helps!

Which statement about oceans is incorrect?

A Evaporation occurs when water is warmed by the sun.
B Most evaporation and precipitation occur over the ocean.
C 97 percent of Earth's water is fresh water from the ocean.
D Water leaves the ocean by the process of evaporation.

Answers

It is C because less than one percent of water is fresh water

10POINTS!!

A satellite orbits Earth 350 km above Earth's surface. Calculate the free-fall acceleration at this altitude.

Answers

Answer:

8.82 m/s²

Explanation:

Formula for the free fall or gravitational acceleration is;

a = GM/r²

Where;

G is gravitational constant = 6.67 × 10^(-11) m³/kg.s²

M is mass of earth = 5.972 × 10^(24) kg

r is radius of earth = 6371 km

We are given that the satellite orbits Earth 350 km above Earth's surface.

Thus, new radius = 6371 + 350 = 6721 km = 6721000 m

Thus;

a = (6.67 × 10^(-11) × 5.972 × 10^(24))/(6721000²)

a = 8.82 m/s²

Other Questions
HELPPP!!!!!! THIS IS DUE AT 8:20 While sitting in a boat, a fisherman observes that 2 complete waves pass by his position every 4 seconds. What is the period of these waves?A)2s B)8s C) 0.5 s D) 4s Martn y Rodolfo nadan en la piscina.Van a nadar en la piscina maana tambin.Sara lee una revista.Yo practico deportes. Which of the following statements is FALSE?a.Segregation in America began with the Black Codes after the Civil War and continued in America into the 1960s and 1970s.b.African Americans were never permitted to vote, even after the Civil War.c.The United States Congress declared the Black Codes unconstitutional.d.The Union Army went to the South to enforce emancipation.Please select the best answer from the choices provided A basket contains four apples and six peaches. You randomly select one piece of fruit and eat it. Then you randomly select another piece of fruit. What is the probability that both pieces of fruit are apples. Some Americans were against the involvement of the United States in World War I. Which best describes how the United States was able to crack down on possible outbursts against the government? my question is in the photo below. keep it simple thank yo u Ryan spends 10 minutes drawing. Then he spends 41 minutes on homework. IT takes him 12 minutes to clean up before he eats dinner at 5:30 p.m. At what time does Ryan starts drawing. Jillian and her friend went shopping. They were both looking for some new CD's. Jillian went to Music Matrix and spent $25.56 on 4 CD's. Her friendspent $18.45 on 3 CD's. Who got the better deal? Show your work for each person. Answer who got the better deal and explain your reasoning, "By the end of 1940. Hitler was at the Pinnacle of his power". Explain the statement How would tariffs help Canadian goods better compete with similar foreign goods in Canadian markets?A. By Limiting The Availability of the foreign goodsB. By raising the prices of the foreign Goods for consumers C. By improving the quality of the Canadian GoodsD. By increasing production levels of the Canadian goods Qu tipo de descubrimiento hicieron los Mayas?a.el arrozc.el cacaob.el chocolated.el trigo helppppppp pleaseeee The Executive Head of the State is __________ If c/7.75 = 1/24. What does c equal? What words in writing has a similar meaning to persuasive -3( -5 + 9z) Combine Like Terms Using the Distributive Property Taylor owns a boutique and needed to compute her inventory of all the scarves and jackets. She had 35 scarves on the floor and five in the storeroom. She had 15 jackets on the floor and eight more in the storeroom. Sally purchased each scarf for $28 and each jacket for $95.The weighted average unit cost of scarves and jackets being sold is __________. True or False. When finding the Least Common Multiple of two denominators, that becomes your Least Common Denominator. HELP PLEASE!!!!!!!!!!!!!!!!!!!