Divide 30 by 29.5735 to get the liquid ounce equivalent of 30 ml or around 1.0144 fluid ounces.
When measuring liquid components for cooking or baking, for example, it might be useful to convert milliliters (ml) to fluid ounces (fl oz).
It's vital to keep in mind that, depending on the amount of accuracy required by the recipe or activity at hand, it's typical when working with liquid measurement to round to the next tenth or hundredth of an ounce or milliliter.
To achieve precise and consistent findings, it's also crucial to utilize the proper measurement equipment and units.
Learn more about liquid ounces at
https://brainly.com/question/29331396
#SPJ4
Look at the picture. Write and solve an equation to model the picture. Show your answer as a multiplication equation with 1/2 as a factor. (6 pears)
Equation for 6 halves of pears is 1/2 x 6 = 3
What is factor?The factor of a number is a number that divides the given number completely without any remainder. The factors of a number can be positive or negative.
Every factor is divisor of that number but every divisor is not a factor of that number.
Given, in the picture,
half of 6 pears
One half of pear can be denoted as = 1/2
Now,
equation of 6 half pears.
= 1/2 x 6
= 4
Hence, equation for 6 half pears can be written as 1/2 × 6 = 3.
Learn more about factor here:
https://brainly.com/question/14549998
#SPJ9
area is determined by what type of measurement?
Area is calculated using length measurements, specifically measurements of two dimensions of a flat or planar shape, such as length and width. The resulting value represents the amount of space occupied by the shape on a flat surface.
Area is commonly measured in square units such as square metres ([tex]m^{2}[/tex]), square feet ([tex]ft^{2}[/tex]), square inches ([tex]in^{2}[/tex]), and so on.
To calculate the area of a flat shape, multiply its length and width by the appropriate unit of measurement.
Area = Length x Width
Similarly, to find the area of a circular surface, we would use the formula for the area of a circle:
Area = π x (Radius)^2
[tex]Area = \pi . (r)^2[/tex]
where π is the mathematical constant pi, and the radius is half the diameter:
So, area is a measure of the amount of space occupied by a flat or planar shape and is calculated using length measurements.
For more question on Area click on
https://brainly.com/question/25292087
#SPJ4
What is the unit rate for 30 millimeters every 4 hours
Answer:
30 X 4=yhhvvihddthjgyujjnbbbvvvukgdddsxgjooi
Given the figure below find the values of x and z.
(ANY IMPROPER ANSWERS WILL BE REPORTED)
Answer:
x = 14°
z = 74°
Step-by-step explanation:
10x - 34° = 106° ( A.I.A )
x = 72°
106° + z = 180° ( linear pair axiom )
z = 74°
MARK ME AS BRAINILIST
Answer:
x=14°
z= 74°
Step-by-step explanation:
Here
(10x-34)°= 106°
since the Vertically Opposite Angle are equal.
so solving for it.
First, we can add 34° to both sides of the equation to get:
10x° - 34°+ 34° = 106° + 34°
Simplifying the left side gives:
10x° = 140°
Then we can divide both sides of the equation by 10 to get:
x = 14°
Again
z+106°=180°
since the sum of angle in the linear pair is equal to 180°
solving for it
we can subtract 106° from both sides of the equation to get:
z + 106° - 106° = 180° - 106°
Simplifying the left side gives:
z = 74°
i need help with this question
Answer:
Below
Step-by-step explanation:
Volume of a cone = 1/3 pi r^2 h
4125 pi = 1/3 pi r^2 h
4125 = 1/3 r^2 h <===if diameter =30 then radius = 15 units
4125 = 1/3 (15)^2 h
4125 / (1/3 * 15^2) = h = 55 units
let f, g,∈ f(r, r) be the functions defined by f(t) = ert and g(t) = est, where r '= s. prove that f and g are linearly independent in f(r, r).
For the defined function f(t)=e^rt and g(t)=e^st where r is not equal to s it was proved that the f and g are linearly independent function in F(r,r).
For the defined function f and g we have,
f(t)=e^rt
g(t)=e^st
Where r is not equal to s.
To prove f and g are linearly independent function we need,
f( t) ± g(t) = 0
Substitute the value of f(t) and g(t) we get,
⇒ e^rt ± e^st = 0
⇒ e^rt ( 1 ± e^( s - r )t = 0
This implies ,
e^rt = 0 or ( 1 ± e^( s - r )t = 0
But e^rt is always greater than zero for all the values of r and t.
e^rt = 0 is not possible.
If ( 1 ± e^( s - r )t = 0
This is possible if and only if r = s .
Which is against the given condition.
Therefore, f(t) and g(t) are linearly independent function in f( r , r).
Learn more about function here
brainly.com/question/12431044
#SPJ4
The above question is incomplete, the complete question is:
Let f, g, element F(r,r) be the function defined by f(t)=e^rt and g(t)=e^st, where r cannot equal s. prove that f and g are linearly independent in F(r,r).
what is integral of xlnx ?
The given integral is solved by using integration by parts. And the required answer for the integral of x lnx is [tex]\int x\ln (x) \;dx=\frac{1}{2}x^2\ln x-\frac{1}{4}x^2+C[/tex].
Integration by parts is a special method that is used when we have to integrate the product of two functions. This method is also called the product rule for integration. Using this method, we consider the integral of x ln x as the product of two functions such as x and ln x. This is solved by using the formula, [tex]\int u\;dv = uv- \int v\;du[/tex].
Let's take u = ln x, dv = x dx, [tex]v=\frac{1}{2}x^2[/tex], [tex]du =\frac{1}{x}dx[/tex]. Then,
[tex]\begin{aligned}\int u\;dv &= uv- \int v\;du\\\int \ln x \cdot xdx&=\ln x\times \frac{x^2}{2}-\int \frac{x^2}{2}\times\frac{1}{x}dx\\&=\frac{1}{2}x^2\ln x-\frac{1}{2}\int xdx\\&=\frac{1}{2}x^2\ln x-\left[\frac{1}{2}\times\frac{1}{2}x^2\right]+C\\&=\frac{1}{2}x^2\ln x-\frac{1}{4}x^2+C\end{aligned}[/tex]
The required answer is [tex]\int x\ln (x) \;dx=\frac{1}{2}x^2\ln x-\frac{1}{4}x^2+C[/tex].
To know more about integration by parts:
https://brainly.com/question/14406735
#SPJ4
100 pts
A box with an open top is formed by cutting squares
out of the corners of a rectangular piece of cardboard
and then folding up the sides. If x represents the
length of the side of the square cut from each corner,
and if the original piece of cardboard is 15 inches by
13 inches, what size square must be cut if the volume
of the box is to be 189 cubic inches?
Use: length: (15-2x)
Width: (132z)
Height: x
The dimensions square must be cut if the volume of the box is to be 189 cubic inches is 9 * 7 * 3.
What is Volume ?The mathematical concept of volume represents the amount of three-dimensional space that an object or closed surface takes up. Volume is measured in cubic units like m³, cm³, in³, etc.
The dimension of the box will be:
= L * W* H
=(15-2x)*(13-2x)*x
The volume:
x(15-2x)*(13-2x) = 189
x(195 - 56x + 4x²) = 189
4x³ - 56x² + 195x - 189 = 0
Hopefully it's an integer, we know it's a low value
Try x=3 using synthetic division
we get , 3 as the solution or or root of the equation.
Check x = 3, the side of the cut out squares
(15-6)(13-6) 3 = 189
9 * 7 * 3 = 189 cu/in
Know more about volume , visit:
https://brainly.com/question/1578538
#SPJ1
According to the Empirical Rule, approximately _____% of the data in a normal distribution will fall within ±1 standard deviation of the mean.a. 34b. 68c. 95d. 99.7
According to the Empirical Rule, approximately 68% of the data in a normal distribution will fall within ±1 standard deviation of the mean. The correct option is (d) 68%
The Empirical Rule is a statistical rule of thumb that describes the approximate proportions of data that fall within a certain number of standard deviations from the mean in a normal distribution.
The Empirical Rule states that for a normal distribution:
About 68% of the data will fall within 1 standard deviation of the mean
About 95% of the data will fall within 2 standard deviations of the mean
About 99.7% of the data will fall within 3 standard deviations of the mean
Therefore, option (b) 68 is the correct answer.
Learn more about Empirical Rule here
brainly.com/question/30404590
#SPJ4
Which number should you multiply the first equation by
to eliminate the x-variable term?
O 1
O
-1
3
To eliminate the x-variable term from an equation, we need to multiply that equation by the opposite of the coefficient of the x-variable. If the first equation is of the form ax + by = c, then we need to multiply it by -a to eliminate the x-variable. Therefore, the number we should multiply the first equation by to eliminate the x-variable term is -3 if the first equation is of the form 3x + 2y = 7.
Honey is $7. 99 for 3 pounds. What is the price for 5 pounds?
The price for 5 pounds of honey is $13.32.
Unitary method is a mathematical technique used to solve problems related to proportions and ratios.
To find the price for 5 pounds of honey, we can use a proportion:
Price of 3 pounds of honey / 3 = Price of 1 pound of honey
We can use this equation to find the price of 1 pound of honey, and then multiply by 5 to find the price of 5 pounds of honey.
Price of 3 pounds of honey / 3 = 7.99 / 3
Price of 1 pound of honey = 2.6633 (rounded to 4 decimal places)
Price of 5 pounds of honey = 2.6633 x 5 = $13.32 (rounded to 2 decimal places)
Learn more about unitary method here
brainly.com/question/22056199
#SPJ4
An arch can be modeled by y=-9/50(x-2)(x-16). Where x and y are measured in meters. The x-axis represents the ground. Find the width in meters
Answer:
+x+=+3+
+y+=+-.9%2A%28+3+%2B+3+%29%2A%28+3+-+3+%29+
+y+=+-.9%2A6%2A0+
+y+=+0+
----------------------
The distance between ( -3, 0 ) and ( 3, 0 )
is +3+-%28-3%29+=+6+
The width of the arch at ground level is 6 ft
-----------------------
Here's the plot of the equation:
Step-by-step explanation:
One important use of the regression line is to do which of the following? a) To make predictions about the values of y for a given x-value. b) To determine the strength of a linear association between two variables. c) To determine if a distribution is unimodal or multimodal. d) Both A and B are correct.
A regression line is defined as an estimate of the line that describes the actual line, which is unknown. It represents a linear relationship between the two variables, that is the dependent and the independent variable.
In other words, the equation of the regression line is used to estimate the value of the dependent variable from a specified value of the independent variable.
Correlation coefficient is used to determine the strength of linear association between two variables, that is the dependent and the independent variable. (Correlation shows what kind of relation two variables have.)
Regression line's important use is to make predictions about the values of y for a given x-value.
Hence option a is correct.
To know more about regression here
https://brainly.com/question/14984940
#SPJ4
My mom chose low numbers for my solution set and I had got two of them to be false. Which the numbers are 3 and 2. First I did was grab the equation. So
13 = 2x + 5
Then I grabbed 3 and put the 3 in front of the 2 but with parentheses around the 2 , so
13 = 2(3) + 5
Then this part is pretty easy for me, but I did. I only got 6 from 2 x 3 and always remove the parentheses when you multiply. You also want to keep the 5 because it is needed for the answer to see if it's a true equation or false. 13 = 6 + 5. Now you always keep the 13 as well, because you have got nothing to multiply them with, so you will do
13 = 11
6 + 5 = 11 and it isn't equal to 13, so it's a false answer. Now the solution set that includes 2 is also false. For this equation
13 = 2(2) + 5
13 = 2 x2 is 4 so
13 = 4 + 5
Add 5 + 4 and you'll get the false answer:
13 = 9
The solution set for this equation is {4}, since 4 is the only value that makes the equation true.
You have done a great job of explaining how to check if the numbers 3 and 2 are part of the solution set for the equation 13 = 2x + 5. You correctly substituted each number in for x and simplified the equation to see if it was true or false. You found that both numbers resulted in a false equation, so they are not part of the solution set.
One thing to note is that the solution set for an equation is the set of all values that make the equation true. So, in order to find the solution set for this equation, you would need to solve for x. Here is how you would do that:
13 = 2x + 5
Subtract 5 from both sides of the equation:
8 = 2x
Divide both sides of the equation by 2:
4 = x
So, the solution set for this equation is {4}, since 4 is the only value that makes the equation true.
Learn more about equation here: https://brainly.com/question/22688504
#SPJ11
What is the conversion of 47kg in lbs ?
The conversion mass value of the kilograms to pounds is given by
( 103.635 ) pounds.
Kilograms and pounds are units which represents one of the standard unit form help us to measure mass.Standard formula which relates these two quantities of mass are represented as :
One kilogram is equal to 2.205 pounds
After substituting the standard relation between the kilograms and the pounds we get the required value,
1 kilogram = 2.205 pounds
⇒ 47 kilograms = ( 47 ) × ( 2.205 ) pounds
⇒ 47 kilograms = ( 103.635 ) pounds
Therefore, the converted value of 47 kilograms into the pounds is written as ( 103.635 ) pounds.
Learn more about kilograms here
brainly.com/question/28844288
#SPJ4
Which equation does the graph of the systems of equations solve?
• -x^2+2x+3=x^2-4x+3
•x^2-2x+3=2x^2-4x+3
•x^2-2x+3=2x^2-4x-3
•-x^2-2x+3=x^2-4x+3
The equation that the graph of the systems of equations solve is:
x^2 - 2x + 3 = 2x^2 - 4x + 3
This is the second equation listed.
A random sample of 240 doctors revealed that 108 are satisfied with the current state of US health care.
The conditions for inference are met.
A 90% confidence interval for the true proportion of all US doctors who are satisfied with the current state of US health care is (0.397, 0.503).
Interpret this interval.
90% of all doctors are satisfied with the current state of US health care.
Between 39.7% and 50.3% of the sample of doctors are satisfied with the current state of US health care.
We are 90% confident that the interval from 0.397 to 0.503 captures p = the true proportion of all US doctors who are satisfied with the current state of US health care.
A majority of the doctors in the sample are satisfied with the current state of US health care.
answer is C
The correct interpretation of the given confidence interval is: We are 90% confident that the interval from 0.397 to 0.503 captures the true proportion (p) of all US doctors who are satisfied with the current state of US health care.
What is confidence interval?In statistics, a confidence interval is a range of values that is likely to contain an unknown population parameter, such as a population mean or proportion, based on a sample from that population. A confidence interval is constructed with a particular level of confidence, which represents the probability that the interval will contain the true population parameter. The confidence level is typically expressed as a percentage, such as 90%, 95%, or 99%.
Here,
This means that if we were to repeat the process of taking a random sample of 240 US doctors and calculating a 90% confidence interval for the proportion of doctors who are satisfied with the current state of US health care, 90% of those intervals would contain the true proportion.
It is not correct to say that 90% of all doctors are satisfied with the current state of US health care, because the confidence interval only provides information about the range of plausible values for the true proportion, not the exact value.
It is also not correct to say that a majority of the doctors in the sample are satisfied with the current state of US health care, because the confidence interval includes values both above and below 0.5, which means that we cannot conclude whether a majority or a minority of doctors are satisfied with the current state of US health care.
Therefore, the correct answer is: We are 90% confident that the interval from 0.397 to 0.503 captures the true proportion of all US doctors who are satisfied with the current state of US health care.
To know more about confidence interval,
https://brainly.com/question/28969535
#SPJ1
Answer:
Step-by-step explanation:
what is the number of the month august
August is the eighth month of the year. Depending on the region and culture, August is known for a variety of historical and cultural events, as well as natural occurrences.
August is noted in the United States for National Women's Equality Day (August 26th), which honors the enactment of the 19th Amendment to the United States Constitution, which granted women the right to vote.
The Perseid meteor shower, which happens yearly between late July and late August and is visible from many parts of the world, is also celebrated in August.
August is connected with the harvest season in several cultures and is commemorated with numerous festivals and rituals.
August is also a popular month for vacations and travel, particularly in the Northern Hemisphere, where it corresponds with the summer season.
For such more question on August:
https://brainly.com/question/30372392
#SPJ4
Find the volume of a cylinder with a diameter of 34 m and a height of 27 m.
The volume of a cylinder with a diameter of 34 m and a height of 27 m is 24501.42 m³.
A cylinder is a three-dimensional figure that has a rectangular body but is rolled up which gives it a round shape with two circles for its top and bottom. We see a lot of cylinders around us all the time.
Here, we have been told that the diameter of the cylinder is 34 which means that the radius is 34/2 = 17 m.
Furthermore, we have also been told that the height of the cylinder is 27 m.
We already know that the volume of a cylinder can be calculated using
= πr²h
Using the values, we get -
= 3.14 * 17 * 17 * 27
= 24501.42 m³.
Learn more about cylinders on
https://brainly.com/question/16134180?referrer=searchResults
#SPJ4
A person deposited 4000 lei at a bank with annual interest of 8%. To find out how much he has after one year
Answer:4320
Step-by-step explanation:8% interest =108% which is equivalent to x1.08
4000 x 1.08 = 4320
Turner drew a scale drawing of a city. The scale of the drawing was 5 inches = 1 yard. What is the scale factor of the drawing?
The scale factor of the drawing is 5:36.The scale factor is the amount by which a shape is increased or shrunk.
What does a scale factor look like?Scale factor is the proportion of an original object's scale to a new one that is an representation of it that is a different size (bigger or smaller). For instance, by increasing each side by, say, 2, we can expand overall size of the a rectangle having lengths of 4 cm and 8 cm. The scale discrepancy between two things is contrasted by a scale factor, which is a ratio. You can figure out the scale factor by selecting two comparable or related components on the two items you are comparing. By comparing every one of these two elements, you may determine a ratio.
When we find the scale factor , we obtain:
5 inches = 1 yard
1 inches=[tex]\frac{1}{5}[/tex] yard.
actual , 1 inche = [tex]\frac{1}{36}[/tex] yard
Scale factor= [tex]\frac{\frac{1}{36} }{\frac{1}{5} }[/tex]= [tex]\frac{5}{36}[/tex].
To know more about scale factor visit:
https://brainly.com/question/30215119
#SPJ1
special right triangle
Answer:
h = 9.9
b = 4.6
Step-by-step explanation:
The first triangle is an isosceles right triangle
The base leg = vertical leg = 7
diagonal = 7√2 = 9.9 (rounded to nearest tenth)
h = 9.9
For the 30-60-90 triangle
if the vertical leg is x, the base leg = vertical leg / √3 = 8/√3 = 4.6
b = 4.6
A car going 50 mil/hr accelerates to pass a truck. 5 seconds later the care is going 80mil/ Calculate
the acceleration of the car.
Answer:
Step-by-step explanation:
5 seconds later acceleration of the car is 6m/h^2
We know that the initial velocity of a car is 50 mph.
In the end, the final velocity of a car is 80 mph.
The time difference is 5 seconds.
For the calculation of the acceleration, we have this formula,
α = δv/t
so here, according to our data, velocity and time are,
u = 50 mph
v = 80 mph
t = 5 s
Finally, the acceleration of the car can be calculated by,
α = (80 - 50) / 5
α = 30 / 5
α = 6 m/h^2
From the above calculations, the car's acceleration is 6 m/h^2.
Learn more on acceleration here;
https://brainly.com/question/605631
https://brainly.com/question/16946886
Why are exponent laws important to use when simplifying exponents?
Exponents laws are
[tex]a^n . a^m = a^{n + m}[/tex]
[tex]a^n / a^m[/tex] = [tex]a^{n - m}[/tex]
Exponent laws are important to use because they will help us to simplify complex expressions easier.
What is an expression?An expression is a way of writing a statement with more than two variables or numbers with operations such as addition, subtraction, multiplication, and division.
Example: 2 + 3x + 4y = 7 is an expression.
We have,
Exponents are written in the form [tex]a^n[/tex]
Where n can be any real numbers.
Now,
a = 2
For n = 0, 1, 2, 3, -1, -2, -3
We get,
[tex]2^0[/tex] = 1
2² = 2 x 2 = 4
2³ = 2 x 2 x 2 = 8
[tex]2^{-1}[/tex] = 1/2
[tex]2^{-2}[/tex] = 1/(2 x 2) = 1/4
[tex]2^{-3}[/tex] = 1/(2 x 2 x 2) = 1/8
Exponents laws are:
[tex]a^n . a^m = a^{n + m}[/tex]
[tex]a^n / a^m[/tex] = [tex]a^{n - m}[/tex]
Thus,
Exponent laws are important to use because they will help us to simplify complex expressions easier.
Learn more about expressions here:
https://brainly.com/question/3118662
#SPJ1
Unit 7 polygons & quadrilaterals homework 1 angle of polygons
The angle of polygons is an important concept in geometry and can be calculated using the formula (n-2) x 180. Quadrilaterals are a specific type of polygon with four sides and four angles, and their interior angles can be found by dividing the sum of the interior angles by the number of sides.
What are the angles of polygons?The angle of polygons is an important concept in geometry. A polygon is a closed shape with three or more sides, and the angles of a polygon are the interior angles formed by the sides. Quadrilaterals are a specific type of polygon with four sides and four angles.
To find the sum of the interior angles of a polygon, you can use the formula (n-2) x 180, where n is the number of sides. For example, a quadrilateral has four sides, so the sum of its interior angles would be (4-2) x 180 = 360 degrees.
Each individual angle of a quadrilateral can be found by dividing the sum of the interior angles by the number of sides. So for a quadrilateral, each angle would be 360/4 = 90 degrees.
More informatio about the angle of polygons here: https://brainly.com/question/18093419
#SPJ11
Find the weighted average of the numbers 1 and 6, with weight four-fifths on the first number and one-fifth on the second number. a. 2 b. 6.2 c. 3 d. 2.8
The weighted average of the given numbers 1 and 6 is 2.
What is a weighted average?
A weighted average is the average of a set of integers with different associated "weights" or values. The weighted average can be calculated by multiplying each value by its weight, then adding the results.
We are given two numbers as 1 and 6.
The formula of weighted average is as follows
Weighted average = (first number x weight of first number) + (second number x weight of second number)
We are given weights as four-fifths on the first number and one-fifth on the second number.
So,
⇒Weighted average = (1 x 4/5) + (6 x 1/5)
⇒Weighted average = 4/5 + 6/5
⇒Weighted average = 10/5
⇒Weighted average = 2
Hence, the weighted average of the given numbers 1 and 6 is 2.
Learn more about weighted average from the given link
brainly.com/question/28293878
#SPJ1
The table of values represents a function f(x) How much greater is the average ra
The average rate of change over the interval [9,10] is greater by 6490.
The average rate of change of a polynomial is the slope of the function.
The average rate of change over the interval [7, 9] is the slope between ( 7, f(7) ) and ( 9, f(9) )
where f(7) and f(9) is the value of the function at 7 and 9.
So, the slope between ( 7, 1852 ) and ( 9, 3878 )
= (3878-1852)/(9-7)
= 2026/2
= 1013
Similarly,
The average rate of change over the interval [4, 6]
i.e. slope between ( 4, f(4) ) and ( 6, f(6) )
So, the slope between ( 4, 358 ) and ( 6, 1178 )
= (1178-358)/(6-4)
= 820/2
= 410
and
1013-410 = 603
So, the polynomial is 603 greater than the average rate of change over the interval [7, 9] than the interval [4, 6]
Learn more about tables of functions on
https://brainly.com/question/14025246?referrer=searchResults
#SPJ4
What is the conversion of 125 mm to inches ?
The value of millimeter in inches can be calculated by simply dividing the millimeter by 25.4 so 125 mm is 4.921 inches.
Unit conversion is the process of converting the measurement of a given amount between various units, often by multiplicative conversion factors that alter the value of the measured quantity without altering its effects.
Converting from millimetres to inches
Between millimetres (mm) and inches (in)
Calculation of Inches (dec) in Inches (frac) in Feet plus Inches ft mm to inches
* The value is rounded to the nearest 1/64 fraction for the inches fraction.
How to change metric units to inches
Inches are equal to 0.03937007874 millimetres in length:
1mm = (1/25.4)″ = 0.03937007874″
The distance d in millimetres (mm) divided by 25.4 gives the distance d in inches (′′):
d(″) = d(mm) / 25.4
Example of 20 mm converted to inches:
d(″) = 125mm / 25.4 = 4.92126″
How many millimetres are in one inch
0.03937 inches are equal to one millimetre:
1mm is equal to 1mm / 25.4mm/in = 0.03937in.
What is the millimetre to inch conversion
25.4 millimetres make up one inch.
1 inch Equals 25.4 millimetres per inch.
Learn more about Millimeter to inches:
brainly.com/question/24515109
#SPJ4
1. Tanya used 3(3/8) yards of fabric to maker her dress, and she used 1(1\3) yards of fabric to make her jacket. What was the total amount of yards?
A. 4(1/8)
B. 4(1/6)
C. 4(4/11)
D. 4(1/2)
E. 4(17/24)
The total amount of yards are 4(1/8).
To find the total amount of fabric Tanya used, we need to add the amount of fabric she used for the dress and the amount of fabric she used for the jacket.
Tanya used 3(3/8) yards of fabric for the dress and 1(1/3) yards of fabric for the jacket. We can add these two amounts by finding a common denominator for the fractions and adding the whole numbers:
3(3/8) + 1(1/3) = 3(9/24) + 1(8/24)
=> 3(17/24)
Therefore, Tanya used a total of 3(17/24) yards of fabric. This can be simplified to:
=> 3(17/24) = 4(1/8)
So the answer is A. 4(1/8).
To learn more about Amount :
https://brainly.com/question/514126
#SPJ4
What is 125% as a fraction?
The fraction of the value given as 125% can be expressed by the term of 125% = 5/4.
A ratio in which the total value is always 100 is a ratio, and a percentage is a portion of that ratio.
To represent a portion of a whole, we utilise fractions. Now, we must translate a percentage to a fraction.
Use the instructions below to convert 125% to a fraction:
First, add the percent sign.
Divide the supplied percentage by 100 to express it as a fraction.
As a result, we can write as 125/100.
To simplify the fraction, divide the numerator and denominator by their respective HCFs.
Now, 125 percent can be expressed as 125/100.
When the given fraction is simplified, we obtain
[Dividing the numerator and denominator by their HCF, which is 25]: 125/100 = 5/ 4
Hence, the fraction of 125% is 5/4.
Using a percent to fraction calculator is another way to confirm.
Hence, the fraction of 125% is 5/4.
Learn more about Fractions:
https://brainly.com/question/28675194
#SPJ4