how to convert lbs in ton

The speed is constant and the direction of motion changes.

Thus, the car maintains a constant speed and it does not maintain a constant velocity - the instantaneous speed varies as it goes around the corner due to the change in direction of motion.

When a car rounds a corner at a steady speed, it changes its direction of motion, and therefore, its velocity changes as well. Velocity is a vector quantity that takes into account both the speed and direction of an object's motion. Since the direction changes, the velocity changes as well. However, if the car maintains the same speed throughout the turn, then the speed remains constant. Speed is a scalar quantity that only takes into account the magnitude of an object's motion, and it is measured as the distance traveled per unit of time.

To know more about velocity, visit:

brainly.com/question/17127206

#SPJ1

The magnitude of the net force on the truck is 2070.5 N.

Frictional force is the force that opposes motion or attempted motion between two surfaces in contact. It arises as a result of the interlocking of irregularities on the surfaces in contact, and it acts in the direction opposite to the direction of motion or attempted motion.

Frictional force can be classified into two types: static friction and kinetic friction. Static friction is the force that prevents an object from moving when a force is applied to it, while kinetic friction is the force that opposes the motion of an object that is already in motion.

The normal force is equal to the weight of the truck, which can be calculated as:

weight = mass x gravity

where gravity is approximately 9.81 m/s^2.

So the weight of the truck is:

weight = 900 kg x 9.81 m/s^2 = 8829 N

Therefore, the normal force is:

normal force = weight = 8829 N

And the frictional force is:

frictional force = 0.5 x 8829 N = 4414.5 N

Next, we can find the net force on the truck by subtracting the force of friction from the force exerted by the car:

net force = 2345 N - 4414.5 N = -2070.5 N

Note that the negative sign indicates that the net force is in the opposite direction to the force exerted by the car, which makes sense since the truck is slowing down.

Finally, we can use Newton's second law to find the acceleration of the truck:

net force = mass x acceleration

-2070.5 N = 900 kg x acceleration

acceleration = -2.3 m/s^2

Again, the negative sign indicates that the truck is slowing down.

To know more about Frictional force, visit:

https://brainly.com/question/30280752

#SPJ1

Answer:

the answer is A, the object will immediately begin moving toward the left.

The color represents the lowest surface temperature for a star is option (3) red

The surface temperature of a star is one of the key factors that determine its color. The color of a star also depends on its composition, size, and distance from us, but temperature is the most important factor.

Stars emit light across a wide range of wavelengths, from radio waves to gamma rays. The peak of this emission is determined by the star's surface temperature, following a pattern called Planck's law. Hotter stars emit more blue and violet light, while cooler stars emit more red and infrared light.

The sequence of colors that represent the different surface temperatures of stars is commonly referred to as the "spectral sequence" or "color sequence". This sequence starts with blue stars (the hottest), followed by white, yellow, orange, and red stars (the coolest).

Therefore, the correct option is (3) red

Learn more about surface temperature here

brainly.com/question/14362404

#SPJ4

Answer:

Explanation:

A body that has speed and is positioned is above the ground has both kinetic and potential energy.

The temperature can be converted by first multiplying 27 by 9 over 5. Then, to get 80.6 degrees Fahrenheit, multiply 32 by 48.6.

The temperature scale known as the Fahrenheit scale was derived from one that physicist Daniel Gabriel Fahrenheit suggested in 1724. The unit is the degree Fahrenheit.

On the Celsius scale, one of the two temperature scales used in the International System of Units (the other being the Kelvin scale), the unit of temperature is the degree Celsius.

Fahrenheit was an early developer of the thermometer as we know it, thus he naturally needed to mark out different temperatures on them. He created the scale that is today known as Fahrenheit.

To learn moore about Fahrenheit please visit
https://brainly.com/question/516840
#SPJ4

When analyzing the motion of a single object, four known physical variables are needed to solve for the unknown quantities using the kinematic equations.

These variables are displacement (s), velocity (v), acceleration (a), and time (t). When solving for the unknown quantities, you can use any combination of the four variables to solve for the desired unknown. For example, if you know the acceleration, displacement, and time, you can use the equation at^2/2 + vt + s = 0 to solve for the velocity. Similarly, if you know the velocity, displacement, and time, you can use the equation v^2 = 2as + v0^2 to solve for the acceleration.

To know more about acceleration please refer:

https://brainly.com/question/30660316

#SPJ4

The frequency of a 90 keV X-ray photon is [tex]2.175 \times 10^{19} \ Hz[/tex].

The frequency of an X-ray photon can be determined using the Planck-Einstein relation, which states that the energy of a photon is directly proportional to its frequency. The equation is:

E = h * f

where E is the energy of the photon, h is Planck's constant

([tex]6.626 \times 10^{-34}[/tex] J s), and f is the frequency of the photon.

To find the frequency of a 90 keV X-ray photon, we need to convert the energy from keV (kiloelectron volts) to joules, since the units of Planck's constant are in joule-seconds. We can do this by multiplying the energy in keV by the electron charge ([tex]1.602 \times 10^{-19 }[/tex]C) to convert it to joules:

90 keV * (1[tex]1.602 \times 10^{-19 }[/tex] C) = [tex]1.4428 \times 10^{-14}[/tex] J

Now we can use the Planck-Einstein relation to find the frequency:

E = h * f

f = E / h

f = [tex]1.4428 \times 10^{-14}[/tex] / ([tex]6.626 \times 10^{-34}[/tex] J s)

f =[tex]2.175 \times 10^{19}[/tex] Hz

To learn more about Frequency :

https://brainly.com/question/27151918

#SPJ4

The equivalent resistance between points A and B in the circuit is 9.844 Ω.

A resistor is an electronic component designed to provide resistance to the flow of electric current in an electronic circuit. Resistors are passive components, meaning they do not amplify or switch the current, but instead they regulate the flow of current by impeding the flow of electrons.

To find the equivalent resistance between points A and B in the circuit, we can use a combination of series and parallel resistors.

First, we can combine resistors R1 and R2 in parallel to get an equivalent resistance:

1/R_eq = 1/R1 + 1/R2

1/R_eq = 1/5 + 1/7

1/R_eq = 0.4 + 0.1429

1/R_eq = 0.5429

R_eq = 1/0.5429

R_eq = 1.844 Ω (rounded to 3 decimal places)

The two resulting resistors, R3 and R_eq, are in series with each other, so we can add their resistances to get the total equivalent resistance:

R_total = R3 + R_eq

R_total = 8.00 Ω + 1.844 Ω

R_total = 9.844 Ω

To know more about Resistors, visit:

https://brainly.com/question/24297401

#SPJ1

A free body diagram allows us to analyze the forces acting on an object or system, and by using Newton's laws of motion, we can solve for force problems and understand the motion of the object or system.

A free body diagram (FBD) is a graphical representation that shows all the forces acting on an isolated object or a system. By creating a FBD, we can analyze the forces acting on the object and use Newton's laws of motion to solve for force problems.

To create a free body diagram FBD, we draw a diagram of the object or system with all external forces acting on it shown as arrows. These forces include weight, normal force, friction, tension, and any other forces that are present. It is important to note that only external forces are included in a FBD, as internal forces cancel each other out.

Learn more about free body diagram here: https://brainly.com/question/21691401

#SPJ1

The required heat of vaporization is calculated when the pressure and temperature are given using the Clausius-Clapeyron equation.

The mathematical equation of Clausius-Clapeyron is given as,

ln(P₁/P₂) = -ΔHvap/R (1/T₂ - 1/T₁)

where,

P₁, P₂ are the vapour pressures at two temperatures T₁, T₂

ΔHvap is enthalpy of vapourization

R is gas constant

When the temperature reaches a certain level, known as the critical temperature, the heat of vaporisation entirely disappears.

Latent heat of condensation grows as pressure rises, while latent heat of vapourization decreases.

By substituting the required values in the above equation, we get the heat of vaporization value.

To know more about heat of vaporization:

https://brainly.com/question/2598092

#SPJ4

60 kilometers per hour (Km) is equal to 37.28 miles per hour.

Distance is the sum of an object's movements, regardless of direction. Distance can be defined and explained as the amount of space an object has covered, regardless of its starting or ending position.

Formula to be used:

mph = km/ 1.609

mph = 60/1.609

= 37.38 mph

The pace at which an object's position changes in any direction is referred to as its speed. The distance traveled in the relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity. You must always multiply or divide by 1.6 to determine MPH. When moving at 60 km/h, the calculation is 60/1.609344, or 37.28 mph.

Learn more about speed:

brainly.com/question/13943409

#SPJ4

An online calculator of resistor color code is a tool that allows you to determine the value of a resistor based on the color bands that are marked on it.

To use the online calculator, you simply enter the colors of the bands on the resistor, and the calculator will provide you with the value of the resistor in ohms.

Some online calculators may also provide additional information, such as the tolerance and temperature coefficient of the resistor.

There are many online calculators of resistor color code available on the internet. Some popular examples include the calculators provided by Digi-Key, Ohm's Law Calculator, and RapidTables.

To know more about resistor here

https://brainly.com/question/17671311

#SPJ4

The required resultant of a pair of 6-unit vectors at right angles to each other is calculated to be 8 units. Correct option is C.

The resultant of the two vectors is the vector that produces the same effect as the combination of the individual vectors. When two vectors are mutually perpendicular to each other, then the resultant vector passes through the point from both originate.

The magnitude of vectors is 6 units.

As the two vectors are said to be perpendicular to each other, we have resultant vector as,

R = √6² + 6² = √72 = 8.49 units ≈ 8 units

Thus, the required resultant of a pair of 6-unit vectors at right angles to each other is calculated to be 8 units.

To know more about vectors:

https://brainly.com/question/28882806

#SPJ4

The uncertainty of a pipe in C refers to the level of imprecision or variability in the measured flow rate of fluid through the pipe.

Pipe uncertainty is affected by several factors, including the diameter and length of the pipe, the viscosity and density of the fluid, and the type of flow (e.g., laminar or turbulent).

To determine pipe uncertainty, it is necessary to consider the accuracy of the flow measurement equipment and the various sources of error that can occur during the measurement process. These may include factors such as temperature fluctuations, pressure changes, and variations in flow velocity.

Reducing pipe uncertainty requires careful attention to measurement techniques and equipment calibration, as well as an understanding of the factors that can affect flow rate. Proper monitoring and control of pipe uncertainty can help ensure accurate and consistent measurement of fluid flow, which is critical for many industrial and scientific applications.

Learn more about viscosity :

https://brainly.com/question/30577668

#SPJ4

1) The x-component of the average velocity of the car is -3.0 m/s

2) The y-component of the average velocity of the car is 4.0 m/s

3) The magnitude of the average velocity is 5.0 m/s

4) The direction of the average velocity is 126.9 degrees

(a) The components of the average velocity of the car are:

Average velocity in x-direction = (change in x-coordinate) / (time interval) = (7.0 m - 4.0 m) / (3.1 s - 2.0 s) = 3.0 m/s

Average velocity in y-direction = (change in y-coordinate) / (time interval) = (6.0 m - 2.0 m) / (3.1 s - 2.0 s) = 4.0 m/s

(b) The magnitude and direction of the average velocity can be found using the Pythagorean theorem and trigonometry. The magnitude is:

|average velocity| = sqrt((average velocity in x-direction)^2 + (average velocity in y-direction)^2)

= sqrt((3.0 m/s)^2 + (4.0 m/s)^2)

= 5.0 m/s

The direction of the average velocity is:

theta = arctan(average velocity in y-direction / average velocity in x-direction)

= arctan(4.0 m/s / 3.0 m/s)

= 53.1 degrees (measured counterclockwise from the positive x-axis)

So the magnitude of the average velocity is 5.0 m/s, and its direction is 53.1 degrees counterclockwise from the positive x-axis.

When the car retraces its path in the opposite direction in the same time, the change in the x-coordinate is negative. Therefore, the x-component of the average velocity is:

Average velocity in x-direction = (change in x-coordinate) / (time interval) = (4.0 m - 7.0 m) / (3.1 s - 2.0 s) = -3.0 m/s

The y-component of the average velocity does not change when the car retraces its path, so it is still 4.0 m/s.

The magnitude of the average velocity is still 5.0 m/s, because it depends only on the change in the x-coordinate and y-coordinate, which are the same regardless of the direction of motion.

The direction of the average velocity is now 126.9 degrees counterclockwise from the positive x-axis, because the car is moving in the opposite direction along the same line.

learn more about velocity: https://brainly.com/question/25749514

#SPJ1

The minimum velocity vo required for the bob to swing through a complete circle is:

[tex]vo = \sqrt\frac{(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]

Using conservation of energy, we can solve for the minimum velocity required for the bob to swing through a complete circle.

The total initial energy of the system is:

[tex]Ei =\frac{1}{2} m1v02 +\frac{1}{2} m2v02[/tex]

The total final energy of the system is:

[tex]Ef = \frac{1}{2} m2vf2 + mg2l2[/tex]

where vf is the velocity of the bob after the collision and g is the gravitational acceleration.

Equating the initial and final energy, we have:

[tex]\frac{1}{2}m1v02 +\frac{1}{2} m2v02 =\frac{1}{2}m2vf2 + mg2l2[/tex]

Solving for vf, we have:

[tex]vf = \sqrt{} \frac{(m1v02 + m2v02)}{m2 - g2l2}[/tex]

The minimum velocity required for the bob to swing through a complete circle is given by the expression:

[tex]vo = \sqrt \frac{(m2vf2 + mg2l2)}{m1}[/tex]

Substituting the expression for vf, we have:

[tex]vo = \sqrt{ \frac{(\frac{m2(m1v02 + m2v02)}{m2 - g2l2})}{m1}[/tex]

[tex]vo = \sqrt\frac {(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]

Therefore, the minimum velocity vo required for the bob to swing through a complete circle is:

[tex]vo = \sqrt\frac{(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]

learn more about velocity Refer:brainly.com/question/17127206

#SPJ4

Answer:

a. The mechanical advantage of the ramp is:

Mechanical advantage = length of ramp / height

Mechanical advantage = 3.2 m / 1.1 m

Mechanical advantage = 2.91

b. The efficiency of the machine is the ratio of output work to input work, expressed as a percentage. In this case, the output work is the work done on the box (force x distance), which is:

Output work = force x distance

Output work = 25 N x 1.1 m

Output work = 27.5 J

The input work is the work done by the person pushing the box, which is:

Input work = force x distance

Input work = 9.9 N x 3.2 m

Input work = 31.68 J

The efficiency of the machine is:

Efficiency = (output work / input work) x 100%

Efficiency = (27.5 J / 31.68 J) x 100%

Efficiency = 86.8%

Therefore, the efficiency of the machine is 86.8%.

c. The power of the crane is given by the formula:

Power = work / time

where work is the product of force and distance, and time is the duration over which the work is done.

In this case, the work done by the crane is:

Work = force x distance

Work = 120 N x 14 m

Work = 1680 J

The time taken to lift the load is 3.6 s. Therefore, the power of the crane is:

Power = work / time

Power = 1680 J / 3.6 s

Power = 466.7 W

Therefore, the power of the crane is 466.7 watts.

#CarryOnLearning

Explanation:

A slanted line on a distance-time graph indicates that the object is moving. On a graph of a distance versus time, the line's gradient or slope equals the object's speed. The steeper the line, the faster the thing moves (and the greater the gradient).

The slope of the line increases with line steepness, and the rate of change of the object's motion increases with line steepness. The idea behind this is that the slope of a line on a position-time graph is equal to the object's velocity. The line's slope will be +4 m/s if the object is moving at a +4 m/s speed. If the object is travelling at a speed of -8 m/s, the line will slope by that amount. You may determine speed from the slope or steepness of a line. The speed increases with increasing slope steepness (greater verticality). Slow speed results from a flatter (more horizontal) slope. If the line is entirely horizontal or flat, the object is stopped or moving at a standstill.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ4

Light energy with very low amplitude would be perceived as DIM.

Amplitude in mild refers to the quantity of strength in an electromagnetic wave and that means is identical here. Amplitude refers to the gap of the most vertical displacement of the wave from its suggest position. The large the amplitude, the better the strength.

Given, a certain light energy with very low amplitude

The wavelength of light energy determines its color, not the amplitude of the light wave. Brightness is related to amplitude.

Since, The amplitude of a wave, in simple terms, is related to the amount if the energy it carries with itself. A wave of high amplitude will carry high energy and a wave with low amplitude carries low energy.

thus,

Light energy with a very high amplitude would be perceived as very bright.

Therefore, Light energy with very low amplitude would be perceived as DIM.

Learn more about amplitude here:

https://brainly.com/question/8662436

#SPJ1

The speed at which an object's velocity changes in relation to time is referred to as acceleration. The rocket has a maximum altitude of 486.5 meters.

The speed at which an object's velocity changes in relation to time is referred to as acceleration. Vector quantities are accelerations. Assuming that it accelerates for four seconds and has a net upward acceleration of twenty meters per second². Consequently, during the acceleration phase, the rocket's highest altitude is

                       y = y₀ + ut + ½ at²

                         y = 0 + (0)(4) + ½ (20) (4)²

                                    y = 160

Currently, the rocket's speed during the acceleration phase is,

v = at + u

v = (20) (4) + 0

v = 80

Therefore , after the rocket's motor is switched off, the highest point it can reach is,

                                 v² = v₀² + 2a (y − y₀)

                               (0)² = (80)² + 2(-9.8) (y − 160)

Using the provided equation to find y,

                                 y ≈ 486.5

Hence, the rocket may go as high as 486.5 meters.

Learn more about Acceleration :

brainly.com/question/12550364

#SPJ4

The store that has less energy at the end than it had at the start is called a net energy loss store.

Energy is the capacity to do work or to produce heat, light, or other forms of energy. It exists in several forms such as kinetic energy (energy of motion), potential energy (stored energy), electrical energy, thermal energy, light energy, gravitational energy, sound energy, and chemical energy. Energy can be converted from one form to another such as electricity is typically generated from the conversion of mechanical energy. Energy is essential for the functioning of the universe, from stars and galaxies to the complex systems of the human body. Conservation of energy is an important concept in physics and everyday life, as it enables us to maximize the useful energy available from a given source and minimize waste.

To learn more about energy
https://brainly.com/question/25959744

#SPJ1

"Two more balloon like objects were shot down over the United States and northern Canada."

North American nations include Canada and the United States of America. Recent confirmation from the governments of both nations that balloon-like objects were shot down while passing over their territory.

There is a great deal of controversy regarding the items and how the various nations are handling them. They are tools used by the Chinese government to eavesdrop, according to the American government. Beijing, however, refutes the allegations and claims that their balloon was utilised for meteorological reasons. We cannot definitively say that all flying objects originate from China or serve one particular function because not all of them have been correctly identified.

To know more about United States:

https://brainly.com/question/81071

#SPJ4

40 degree Celsius in Fahrenheit is 104F. Fahrenheit and Celsius are related in that they are both units of temperature measurement.

To convert Celsius to Fahrenheit, you need to use the formula:

[tex]F = (9/5) * C + 32[/tex]

In this case, the formula would be:

[tex]Fahrenheit = (9/5) * 40 + 32[/tex]

Fahrenheit = 72 + 32

Fahrenheit = 104°F

Therefore, 40°C is equal to 104°F.

The formula for converting a temperature from Fahrenheit to Celsius is [tex](F - 32) * 5/9[/tex]. This formula can be used to find the Celsius equivalent of any temperature given in Fahrenheit. Celsius, also known as centigrade, was developed by Swedish astronomer Anders Celsius in the mid 1700s. It is a scale based on 0 degrees as the freezing point of water and 100 degrees as the boiling point of water.

To learn more about temperature click here  https://brainly.com/question/12869377

#SPJ4

Warm, moist air starts to uplift in the initial stages of thunderstorm development because of a combination of different lift mechanisms.

One of these is convective lift, which occurs when warmer air rises due to its buoyancy. This is because warm air is less dense than cooler air, and so it is more easily displaced by the cooler air. Another lift mechanism is orographic lift, which is the result of air being forced to rise as it moves over a mountain or hill. Finally, frontal lift occurs when a cold front moves into an area of warm, moist air, forcing it to rise. All of these lift mechanisms can combine to cause warm, moist air to be lifted and form a thunderstorm.

To know more about buoyancy please refer:

https://brainly.com/question/19168433

#SPJ4

The pressure drop over a certain length of horizontal pipe is assumed to be a function of the velocity is true because of the relationship between fluid flow and pressure, which is described by the Bernoulli's principle.

The pressure drop over a certain length of horizontal pipe is typically related to the flow rate through the pipe, which is in turn related to the velocity of the fluid. This relationship is described by the Darcy-Weisbach equation,

ΔP = f (L/D) (ρV^2/2)

Where ΔP is the pressure drop, L is the length of the pipe, D is the diameter of the pipe, ρ is the density of the fluid, V is the average velocity of the fluid, and f is the friction factor, which depends on the roughness of the pipe surface and the Reynolds number of the flow.

This equation shows that the pressure drop is proportional to the square of the velocity of the fluid, which means that as the velocity increases, the pressure drop will also increase. Therefore, the pressure drop over a certain length of horizontal pipe can be related to the velocity of the fluid flowing through it.

To know more about the pressure drop, here

brainly.com/question/16013745

#SPJ4

To convert pascals (Pa) to atmospheres (atm), you can use the following conversion factor: 1 atm = 101325 Pa

Pascal (symbol: Pa) is the unit of pressure in the International System of Units (SI). It is defined as the force of one newton acting over an area of one square meter.

In other words, the pascal is a measure of the pressure or stress on a surface that results from a force being applied uniformly over that surface. For example, if you apply a force of 100 newtons over an area of 1 square meter, the pressure would be 100 pascals (since 1 Pa = 1 N/m^2).

The pascal can also be expressed in terms of other units, such as the bar (1 bar = 100,000 Pa) or the atmosphere (1 atm = 101,325 Pa). The pascal is commonly used in many fields of science and engineering, including fluid mechanics, aerodynamics, and material science. It is also used to express other physical quantities such as stress, strain, and modulus of elasticity.

This means that one atmosphere is equal to 101325 pascals. To convert pascals to atmospheres, you can divide the pressure value in pascals by 101325.

For example, to convert 500000 Pa to atm:

500000 Pa / 101325 = 4.93 atm (rounded to two decimal places)

Therefore, 500000 Pa is approximately equal to 4.93 atm.

To know more about pascals here

https://brainly.com/question/30403415

#SPJ4

Answer: 120000 m

Explanation:

in electromagnetic wave, velocity is same as 3*10^8 m/s

therefore

λ = v/f

= c/f

= 3*10^8 / 2500 Hz

= 120000 m

Ca(OH)2 has a molar mass of 74.092 g/mol.

Calcium hydroxide, sometimes referred to as slaked lime, has the chemical formula Ca(OH)2. It is an inorganic material that when solid appears white and powdered.

The atomic masses of each element in the periodic table must fist be determined.

Ca = 40.078 (Calcium)

O(Ozone) = 15.999

1.008 H(Hydrogen)

The following equation can be made:

40.078 + (15.999 + 1.008) × 2

40.078 + (17.007) × 2

40.078 + 34.014

= 74.092 g/mol

The molar mass, or molecular mass, of Ca(OH)2 is 74.093 grammes. Th molecule consists of one calcium atom, two oxygen atoms, and two hydrogen atoms. Their molar masses are totaled in this The molar mass of Ca(OH)2 is 74.092 g/mol.

To know more about Ca(OH)2 on

https://brainly.com/question/30582287

#SPJ4

The stored elastic potential energy decreases.

When we compress a spring, we apply a force that compresses the coils of the spring closer together. This causes the spring to store elastic potential energy, which is the energy that the spring possesses due to its deformation. This potential energy is a form of mechanical energy that can be converted into other forms of energy, such as kinetic energy or thermal energy.

When the compressed spring is released, the stored elastic potential energy is converted into kinetic energy as the spring expands and the compressed coils of the spring move apart hence the store elastic potential energy decreases.

Learn more about elastic spring:https://brainly.com/question/29490361

#SPJ1