how to convert quarter to g

because the ocean releases heat more slowly than land, coastal areas tend to be more temperate. Upwelling in many coastal regions provides a cool contrast in air temperature over the ocean and land that is conducive to frequent summer fog.

The airplanes have the same effective cross sectional area and drag coefficient. Then, the ratio of drag force at the two densities is 2.3.

Drag Force:

Drag is a type of air resistance that resists the motion of an object moving through the air. Strength is an important consideration in engineering design. Understanding drag and how to reduce it can help people design stronger structures and bridges to better resist wind, more efficient cars and planes, and more efficient harvesting of wind and hydroelectric power. As cars, planes and ships move, drag slows them down. Therefore, engineers improved the aerodynamics of these vehicles to reduce drag and increase vehicle efficiency.

It is related to the density ρ, to the drag coefficient C, to the speed v, to the surface A as follows:

D = 1/2 ρCAv².

According to the Question:

Here, C and A are the same then the ratio of the drag forces D1 and D2 at the two densities is:

D1/D2 = ρ1 v1²/ρ2 v2²

ρ1  = 0.38 kg/m³

ρ2 = 0.67 kg/m³

v1 = 1000 km/h

v2 = 500 km/h

Then, the ratios of drag force is ;

D1/D2 =  0.38 kg/m³ × 1000 km/h / (0.67 kg/m³ × 500 km/h)

          = 2.3

Therefore, the ratio of drag force at the two densities is 2.3.

Learn more about Drag Force:

https://brainly.com/question/12774964

#SPJ4

The second law of motion, also known as Newton's second law of motion, states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

This law is expressed mathematically as:

F = ma

where F is the force applied to the object, m is the mass of the object, and a is the resulting acceleration.

In other words, the greater the force applied to an object, the greater the acceleration it will experience, and the greater the mass of the object, the smaller the resulting acceleration for a given force.

This law also implies that if two objects of different masses are acted upon by the same force, the object with the smaller mass will experience a greater acceleration.

The second law of motion is one of the fundamental laws of physics and is used to explain a wide range of phenomena, from the motion of objects on Earth to the behavior of celestial bodies in space.

To know more about motion here

https://brainly.com/question/24018491

#SPJ4

The most important consideration when conducting a spot speed study is to ensure accurate and representative data collection.

A spot speed study is a method of collecting data on the speed of vehicles at a specific location and time. The data collected can be used to determine if the speed of vehicles is within the acceptable range or if there is a need for traffic control measures.

The accuracy and representativeness of the data collected are essential for the success of the study. The study should be conducted under conditions that are representative of the typical conditions at the location of interest. This includes collecting data during typical traffic conditions, such as rush hour, and under normal weather conditions.

Additionally, the methods used to collect the data should be accurate and reliable. This includes using calibrated equipment, selecting appropriate locations for data collection, and ensuring that the data is recorded correctly.

To know more about the speed, here

brainly.com/question/30462853

#SPJ4

According to the statement, The magnetic field 10.0 cm from their midpoint, in their plane is 0.028.

The region around a magnet where the effects of magnetism are perceived is known as the magnetic field. To explain how the force of magnetism is distributed in the area around and inside something magnetic in nature, we use a magnetic field as a tool.

The magnetic field produced by these two current-carrying wires is simply the sum of the magnetic fields produced b each individually. Sin ce these current are antiparallel, their magnetic field partially cancel so that

Bnet = uI/2π ( 1/r1- 1/r2) = [(4π × 10^-7 m/A)(25.0 A)]/2π

=(1/0.10m - 0.0014m) - (1/0.10 + 0.0014m)

=1.4× 10^-6

in comparison, the earth's magnetic field is 0.5 × 10^-4 T so

Bnet/Bearth = 1.4× 10^-6 T/0.5 × 10^-4 T = 0.028

To know more about magnetic field visit :

https://brainly.com/question/3160109

#SPJ1

The complete question is -

A long pair of insulated wires serves to conduct 25.0A of dc current to and from an instrument.

if the wires are of negligible diameter but are 2.8 mm apart, what is the magnetic field 10.0 cm from their midpoint, in their plane

Answer:

3906J

Explanation:

m=93 h=4.2 g=10

PE=m×g×h

= 93 ×10 ×4.2

=3906J

The ratio of the drag force on the jet to the drag force on the prop-driven transport is approximately 3.43.

The drag force on an airplane is given by the formula,

Fd = (1/2) * rho * v^2 * A * C

where Fd is the drag force, rho is the density of air, v is the velocity of the airplane, A is the effective cross-sectional area, and C is the drag coefficient.

For the jet flying at 1000 km/h at an altitude of 10 km,

Fd_jet = (1/2) * 0.38 kg/m^3 * (1000 km/h)^2 * A * C

For the prop-driven transport flying at half the speed and altitude,

Fd_prop = (1/2) * 0.67 kg/m^3 * (500 km/h)^2 * A * C

Fd_jet/Fd_prop = [(1/2) * 0.38 kg/m^3 * (1000 km/h)^2]/[(1/2) * 0.67 kg/m^3 * (500 km/h)^2]

Simplifying this expression,

Fd_jet/Fd_prop = (0.38/0.67) * (1000/500)^2

Fd_jet/Fd_prop ≈ 3.43

To know more about drag force, here

brainly.com/question/12774964

#SPJ4

To convert kilojoules (kJ) to calories (cal), you can use the following conversion factor: 1 calorie = 4.184 kilojoules

Joules (J) is the SI unit of energy. One joule is equal to the amount of energy required to perform one unit of work by applying a force of one newton through a distance of one meter in the direction of the force.

In other words, if a force of one newton is applied to an object and it moves one meter in the direction of the force, the work done is one joule.

Joules can be used to measure various forms of energy, including kinetic energy (the energy of motion), potential energy (the energy of position), and thermal energy (the energy of heat). Therefore, to convert kJ to calories, you can multiply the number of kJ by 4.184.

For example, if you have 200 kJ and want to convert it to calories, you would do:

200 kJ * 4.184 cal/kJ = 836.8 cal

So, 200 kJ is equal to 836.8 calories.

To know more about calories here

https://brainly.com/question/27905457

#SPJ4

The correct answer is: Bulb A will stay lit but Bulb C will turn off when Bulb D is disconnected in the circuit on the right, and both Bulb A and Bulb C will stay lit when Bulb B is disconnected in the circuit on the left.

A circuit is a complete path or loop through which an electric current can flow. It consists of different components such as a power source (such as a battery), conductive wires, and other electrical components such as resistors, capacitors, and switches.

In the circuit on the left, Bulb A and Bulb B are connected in parallel while in the circuit on the right, Bulb C and Bulb D are connected in series.

When Bulb B is disconnected from the circuit on the left, Bulb A will stay lit because it is still receiving current from the battery through the unbroken wire. Bulb C will also stay lit because it is not affected by the disconnection of Bulb B.

When Bulb D is disconnected from the circuit on the right, the circuit will be incomplete because it is in series. This means that no current will flow through the circuit, and both Bulb A and Bulb C will turn off.

To know more about capacitors, visit:

https://brainly.com/question/17176550

#SPJ1

The approximate order of magnitude of the amount of charge collected by socks when walking across carpet in socks would be in the range of 10^-8 C (Option D) to 10^-12 C (Option E).

The amount of charge generated by friction between socks and carpet is typically very small, on the order of microcoulombs or even picocoulombs. This is because the charge generated by friction is proportional to the amount of surface area in contact and the strength of the electric field in the region.

Therefore, option D (10^-8 C) and option E (10^-12 C) are the most likely orders of magnitude for the amount of charge collected by socks in such a situation. Option A (10^3 C) and option B (1.0 C) are far too high, while option C (10^-3 C) is too low.

To know more about the static charge, here

brainly.com/question/30686813

#SPJ4

--The complete answer is, Occasionally when walking across carpet in socks your socks seem to collect "static". This static build up really occurs when charges from the carpet are transferred to your socks by friction). What would the approximate order of magnitude be of the amount of charge collected by your socks in such a situation?

A. 10^3 C

B. 1.0 C

C 10^-3 C

D 10^-8 C

E 10^-12 C--

Answer:

The seismic waves generated by earthquakes travel faster through the mantle than the crust, providing scientists with information about the differences in composition and density between the two layers of the Earth. The mantle is less dense than the crust, and thus it is able to transmit seismic waves more quickly than the thicker and denser crust.

The work done is 1,944 J, when a weight lifter lifts 130 kg from 1.5 m to 2.0 m above the ground

Work done is a term used to describe the amount of effort that has been expended on a particular task or project. It can refer to the amount of time and energy that has been put into something, or the amount of progress that has been made. It can also refer to the results of that work, such as the completion of a task or the production of a product. Work done is typically measured in terms of hours worked, milestones achieved, or the amount of output produced.

when a weight lifter lifts 130 kg from 1.5 m to 2.0 m above the ground, the work done is

Work = [tex]force\times distance[/tex]

Work = [tex]mass\times gravity \times height[/tex]

Work = [tex]130 kg\times 9.8 m/s^2 \times 0.5 m[/tex]

Work = 1,944 J

To know more about Work done, visit:

https://brainly.com/question/25573309

#SPJ1

The Sun's diameter is approximately 1.39 million kilometers, while the distance between the Earth and the Sun is approximately 149.6 million kilometers. This means that the Sun's diameter is about 109 times larger than the Earth's diameter, and the distance between Earth and Sun is about 108 times the Sun's diameter.

Despite this enormous distance, the gravitational pull of the Sun on the Earth and other planets in the Solar System keeps them in their orbits, while the energy from the Sun supports life on Earth through photosynthesis and other processes.

To know more about Sun's diameter, here

brainly.com/question/17615874

#SPJ4

The proportional constant k is called the spring constant. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length.

The force a spring applies to items fastened to its ends is proportional to the distance the spring travels from its equilibrium length and is always pointed in the direction of equilibrium. Consider a spring that has one end attached to a wall or ceiling and the other end being pulled or pushed by an object. The spring is pulled by the object, and the object is pulled by the spring. The spring applies a force F to the object that is in the opposite direction as the free end's displacement. The equilibrium point of the spring's free end is at x = 0, and if the x-axis of a coordinate system is selected to be parallel to the spring, then F = -kx.

To know more about above topic visit:

https://brainly.com/question/2449067

#SPJ4

The underlying force in all types of mass movements is gravity.

Gravity is the force that attracts objects with mass towards each other. In the case of mass movements, it is the force that causes rocks, soil, snow, or other materials to move downhill or away from a slope or vertical face. This force is the result of the weight of the material acting on itself and the underlying surface, which can cause stress and deformation in the soil or rock.

The driving force for mass movements can come from different sources, including natural phenomena such as earthquakes or heavy rainfall, or human activities such as mining or construction. However, in all cases, gravity is the force that pulls the material down the slope or away from the vertical face.

The speed and magnitude of a mass movement depend on several factors, including the type and properties of the material, the steepness and shape of the slope, the water content, and the force and duration of the triggering event. Understanding the role of gravity in mass movements is crucial for predicting, preventing, and mitigating the effects of natural hazards such as landslides, rockfalls, or avalanches.

To learn more about Gravity :

https://brainly.com/question/14874038

#SPJ4

In Fahrenheit, 48.8 degrees Celsius is equivalent to 149.04 degrees.

Use the formula below for the convert 48.8 degrees Celsius to Fahrenheit:

°F = (°C x 1.8) + 32

The process of translating a temperature from one scale to another is referred to as temperature conversion. Temperature conversions between the several regularly used temperature scales, including Celsius, Fahrenheit, and Kelvin, are frequently required.

where the temperature is expressed in degrees Fahrenheit (°F) and degrees Celsius (°C).

Plugging in 48.8 degrees Celsius yields the following results:

°F = (48.8 x 1.8) + 32

°F = 117.04 + 32

°F = 149.04

As a result, 48.8 Celsius is equivalent to 149.04 Fahrenheit.

To learn more about Fahrenheit :

https://brainly.com/question/20697375

#SPJ4

The cost of using Mastering Physics can vary depending on several factors, such as the institution and the specific course. The cost of these codes can range from $50 to $150 or more, depending on the length of access and the number of courses included.

Some institutions may include the cost of using Mastering Physics as part of their tuition fees. Typically, students purchase access codes that are valid for a certain period. Mastering Physics is an online platform designed to supplement physics courses for students. It provides interactive tutorials, homework assignments, and other educational resources to enhance the learning experience.

To know more about Master's in physics, here

brainly.com/question/28220967

#SPJ4

Electrical conductors installed in rigid metal conduit encased in concrete are considered to be accessible.

Enclosed conductors in electrical conduit are very well protected against impacts, moisture, and chemical vapors. Comparing the ease of design and construction to several runs of cables or the price of specialized composite wire, various numbers, sizes, and types of conductors can be pushed into a conduit.

Building wiring systems may undergo regular modifications. Electrical conduit can be used for frequent wiring upgrades because it allows for the easy removal of old conductors and the installation of new ones with little disruption along the conduit's course.

Some conduit types may be directly encased in concrete. This is frequently utilized in commercial buildings to enable the installation of electrical and communication outlets in the center of sizable open spaces. Hence, they are considered to be accessible.

Find more on electrical conduit ?

https://brainly.com/question/1991515

#SPJ1

Answer:

Option.D Red

Explanation:

Red stars usually have the lowest surface temperature.

Mass is conserved in a reaction if the of the initial reactant masses equals the of the masses of products

The law of conservation of mass is a fundamental principle in chemistry that states that the total mass of a closed system remains constant during a chemical reaction. This means that the mass of the reactants before a chemical reaction is equal to the mass of the products after the reaction.

The mass of the reactants before the reaction is equal to the mass of the products after the reaction. This confirms that the law of conservation of mass holds true for this chemical reaction.

This principle is essential in chemistry as it allows us to make predictions about the outcome of a reaction based on the starting materials. It also helps to ensure the accuracy of experimental measurements, as any discrepancy between the expected and observed masses can indicate an error in the experiment.

Learn more about law of conservation of mass  here

brainly.com/question/13383562

#SPJ4

True, instantaneous velocity can be positive, negative, or zero.

Instantaneous velocity is the velocity of an object at a specific moment in time. It can be positive if the object is moving in a positive direction, negative if the object is moving in a negative direction, or zero if the object is not moving at all

Velocity is a measure of how fast an object is moving and in what direction. Instantaneous velocity, as the name suggests, refers to the velocity of an object at a specific instant in time. It is calculated by finding the derivative of the object's displacement with respect to time.

When an object is moving in a positive direction, its instantaneous velocity will be positive. For example, if a car is moving forward on a straight road, its velocity is positive. Similarly, when an object is moving in a negative direction, its instantaneous velocity will be negative. For example, if the same car is moving backward on the same road, its velocity is negative. Finally, if an object is not moving at all, its instantaneous velocity is zero.

Learn more about instantaneous velocity here: https://brainly.com/question/2234298

#SPJ1

10 kilometers (km) is equal to approximately 6.2137 miles.

The mile is a unit of length commonly used in the United States, while the kilometer is the standard unit of length in the metric system used in most other parts of the world.

To convert kilometers to miles, we can use the conversion factor of 1 kilometer is equal to 0.621371192 miles. Multiplying 10 km by this conversion factor gives us the result: 10 km x 0.621371192 miles/km = 6.2137 miles

Therefore, 10 kilometers is equivalent to approximately 6.2137 miles. This conversion can be useful in a wide range of contexts, such as when traveling internationally, calculating distances for athletic events, or comparing the fuel efficiency of vehicles that use different units of measurement.

To learn more about miles

https://brainly.com/question/13816350

#SPJ4

Each tire makes 30 revolutions before the car comes to a stop, as the distance traveled (radius * number of revolutions) is equal to the final velocity divided by the acceleration.

Acceleration is the rate of change of velocity over time. It is represented mathematically by the equation a = Δv/Δt, where a is acceleration, Δv is the change in velocity, and Δt is the change in time. Acceleration can be a change in the speed of an object, or it can be a change in the direction of its motion. Acceleration can be caused by a variety of forces, including gravity, friction, and applied forces.

To know more about Acceleration
https://brainly.com/question/460763

#SPJ1

In both scenarios, the concept of power and work is demonstrated. A car engine has more power than a horse because a car engine can do the same amount of work in less time. Raj applied less power than Yasmin because his stacking took more time to do the same amount of work.

Power is defined as the rate at which work is done, which means that the more power applied, the faster work can be done.

In the first scenario, a car engine has more power than a horse because it can do the same amount of work in less time. This is because the car engine can convert energy from fuel more efficiently than a horse can convert energy from food. As a result, the car engine can produce more power and do more work in a shorter amount of time.

In the second scenario, Yasmin completed the task of stacking 10 boxes in 2 minutes, while Raj took 3 minutes to complete the same task. This means that Yasmin applied more power than Raj because she was able to do the same amount of work in less time. This could be due to a variety of factors, such as Yasmin having more experience or strength, or using a more efficient technique.

These scenarios demonstrate that power and work are closely related.

To know more about Power and Work:

https://brainly.com/question/3854047

#SPJ4

___The given question is incomplete, the complete question is given below:

A car engine has___ power than a horse because a car engine does the same amount of work in___ time. Yasmin and Raj each had 10 boxes of equal weight to stack next to each other on the same shelf, at the same height and in the same arrangement. Yasmin completed the task in 2 minutes, while Raj took 3 minutes to stack his boxes. Raj applied___ power than Yasmin because his stacking took____ time to do the same amount of work.

Answer:

More for the first question

Less for the second question

Less for the third question

More for the fourth question

Explanation:

I Did This in Edge

False. SI (International System of Units) base units are standardized and do not depend on the location where measurements are made.

The SI system is a globally recognised and standardised measuring system. The framework provides a standard paradigm for measuring physical quantities independent of location or circumstance. SI base units are universal measures that underpin this system.

These base units—meter, kilogramme, second, etc.—are defined globally. This standardisation promotes uniformity, accuracy, and a single language for science and technology by ensuring accurate and trustworthy scientific measurement communication across researchers, enterprises, and governments.

Learn more about SI units, here:

https://brainly.com/question/24688141

#SPJ12

Answer:

Approximately 500,000 N.

Explanation:

We can start by using the equation for the efficiency of a screw:

efficiency = load / effort

where load is the force being exerted on the nut by the spring, and effort is the force being exerted on the end of the spanner. Solving for effort, we get:

effort = load / efficiency

Substituting the given values, we get:

effort = 1000 N / 0.3 = 3333.33 N

Next, we can use the equation for the mechanical advantage of a screw:

mechanical advantage = length of effort arm / pitch

where the length of the effort arm is the length of the spanner, and the pitch is the distance traveled by the screw for one complete turn. Substituting the given values, we get:

mechanical advantage = 15 cm / 0.1 cm = 150

Finally, we can use the formula for the relationship between force, effort, and mechanical advantage:

force = effort × mechanical advantage

Substituting the values we found, we get:

force = 3333.33 N × 150 = 499999.5 N

Therefore, the force being exerted on the end of the spanner is approximately 500,000 N.

Tetrachloromethane is the name given to the CCl4 chemical.

Structure of carbon tetrachloride chemically. The liquid CCl4 is transparent, nonflammable, and heavy. It evaporates quickly and has a distinctive sweet smell that is similar to that of chloroform. The term "volatile organic compound" refers to CCl4 (VOC).

The secondary prefix for four carbon atoms is tetra. The first prefix for chlorine is chloro. Meth represents the word's root, which is carbon. Tetrachloromethane, which may also be written as 1,1,1,1, is the name of the substance. a week ago With the chemical formula CCl4, carbon tetrachloride is an organochlorine chemical compound that goes by several different names.

covalent substance Since it has four non-polar covalent connections between carbon and chlorine, carbon tetrachloride (CCl4) is classified as a covalent molecule.

To know more about tetrachloride on

https://brainly.com/question/4408495

#SPJ4

The mass of Neon in the ball is 5.18 grams when two balloons of the same volume where one contains 1.0 g helium and the other with Neon.

Given the mass of helium = 1g

The molar mass of helium (He) = 4g/mol

The mass of neon = m2

The molar mass of Neon (Ne) = 20.18 g/mol

Since the volume of two balloons is same, mass of the balloons depend on their molar masses respectively.

So, 1/4 = m2/20

m2 = 5.18g

Hence the mass of Neon in the balloon would be equal to 5.18g.

To learn more about Mass click here https://brainly.com/question/30337818

#SPJ4

A. Absorption

B. Refraction

C. Diffraction

D. Reflection

More on light waves can be found here: https://brainly.com/question/25588186

#SPJ1