The answer is given below.
Describe Isothermal Process?An isothermal process is a thermodynamic process in which the temperature of a system remains constant throughout the process. This means that the system's internal energy is also constant, since internal energy is related to temperature.
During an isothermal process, energy is exchanged between the system and its surroundings in the form of heat, as the system expands or contracts. If the system is a gas, for example, it may expand and contract in response to changes in pressure, while the temperature remains constant.
The behavior of an isothermal process is governed by the ideal gas law, which states that the product of pressure and volume is proportional to the temperature of the gas. This means that if the temperature remains constant, any change in volume must be accompanied by a corresponding change in pressure.
Isothermal processes are often used in industrial applications, such as refrigeration and air conditioning systems, where maintaining a constant temperature is important. They are also studied in the field of thermodynamics, as they provide insights into the fundamental behavior of gases and other thermodynamic systems.
Overall, an isothermal process is characterized by a constant temperature and internal energy, and is an important concept in the study of thermodynamics and the behavior of gases.
a) To find the flow velocity in the test section, we can use the formula for the speed of sound at a given temperature and gas:
a = sqrt(gamma * R * T)
Where gamma is the specific heat ratio, R is the gas constant, and T is the temperature. For air, gamma = 1.4 and R = 287 J/kg-K. At 245.45 K, the speed of sound is:
a = sqrt(1.4 * 287 * 245.45) = 1063.6 m/s
The flow velocity is Mach 15 times the speed of sound:
v = Mach * a = 15 * 1063.6 = 15,954 m/s
b) The isentropic relation for an ideal gas is:
p * (v^gamma) = constant
Assuming that the gas is approximately stagnant before the diaphragm is broken, we can use this relation to find the pressure upstream of the nozzle:
p2/p1 = (T2/T1)^(gamma/(gamma-1))
Where T1 is the temperature upstream of the nozzle, which we want to find. Rearranging and solving for p2, we get:
p2 = p1 * (T2/T1)^(gamma/(gamma-1))
p1 is the atmospheric pressure, which is 101,325 Pa. T2 is 7 K. Gamma is 1.4. Solving for T1, we get:
T1 = T2 * (p2/p1)^((gamma-1)/gamma) = 2904.4 K
c) The heat added to the gas at constant pressure is given by:
q = Cp * (Tz - T1)
Where Cp is the specific heat at constant pressure. We are given that Cp = 1068 J/kg-K. Tz is 245.45 K, and T1 is 2904.4 K. Therefore:
q = 1068 * (245.45 - 2904.4) = -2,847,907 J/kg
The negative sign indicates that heat is being removed from the gas, not added. This is because the gas is being cooled from the initial temperature of 2904.4 K to the desired temperature of 245.45 K.
The work required for isothermal compression is given by:
w = R * T * ln(pz/p1)
Where R is the gas constant, T is the temperature (which we assume remains constant during compression), and pz is the desired pressure in the test section. R is 287 J/kg-K, T is 245.45 K, and pz is 20.3 Pa. Therefore:
w = 287 * 245.45 * ln(20.3/101325) = -37,597 J/kg
Again, the negative sign indicates that work is being done on the gas, not by the gas.
To maintain the temperature at Tz during compression, the gas must be compressed slowly enough that it can exchange heat with its surroundings and remain at constant temperature. This is called an isothermal process.
d) If we isentropically compress the ambient air to the desired pressure, the pressure ratio is given by:
p2/p1 = (T2/T1)^(gamma/(gamma-1))
Where T1 is the initial temperature, which is 290.7 K, and T2 is the final temperature, which is 245.45 K. Solving for p2/p1, we get:
p2/p1 = 0.0000366
Multiplying by the initial pressure of 101,325 Pa, we get:
p2 = 3.7 Pa
To know more about temperature visit:
https://brainly.com/question/23411503
#SPJ1
During an isothermal process, energy is exchanged between the system and its surroundings in the form of heat, as the system expands or contracts. If the system is a gas, for example, it may expand and contract in response to changes in pressure, while the temperature remains constant.
Describe Isothermal Process?An isothermal process is a thermodynamic process in which the temperature of a system remains constant throughout the process. This means that the system's internal energy is also constant, since internal energy is related to temperature.
The behavior of an isothermal process is governed by the ideal gas law, which states that the product of pressure and volume is proportional to the temperature of the gas. This means that if the temperature remains constant, any change in volume must be accompanied by a corresponding change in pressure.
Isothermal processes are often used in industrial applications, such as refrigeration and air conditioning systems, where maintaining a constant temperature is important. They are also studied in the field of thermodynamics, as they provide insights into the fundamental behavior of gases and other thermodynamic systems.
According to the given data:a) To find the flow velocity in the test section, we can use the formula for the speed of sound at a given temperature and gas:
a = sqrt(gamma * R * T)
Where gamma is the specific heat ratio, R is the gas constant, and T is the temperature. For air, gamma = 1.4 and R = 287 J/kg-K. At 245.45 K, the speed of sound is:
a = sqrt(1.4 * 287 * 245.45) = 1063.6 m/s
The flow velocity is Mach 15 times the speed of sound:
v = Mach * a = 15 * 1063.6 = 15,954 m/s
b) The isentropic relation for an ideal gas is:
p * (v^gamma) = constant
Assuming that the gas is approximately stagnant before the diaphragm is broken, we can use this relation to find the pressure upstream of the nozzle:
p2/p1 = (T2/T1)^(gamma/(gamma-1))
Where T1 is the temperature upstream of the nozzle, which we want to find. Rearranging and solving for p2, we get:
p2 = p1 * (T2/T1)^(gamma/(gamma-1))
p1 is the atmospheric pressure, which is 101,325 Pa. T2 is 7 K. Gamma is 1.4. Solving for T1, we get:
T1 = T2 * (p2/p1)^((gamma-1)/gamma) = 2904.4 K
c) The heat added to the gas at constant pressure is given by:
q = Cp * (Tz - T1)
Where Cp is the specific heat at constant pressure. We are given that Cp = 1068 J/kg-K. Tz is 245.45 K, and T1 is 2904.4 K. Therefore:
q = 1068 * (245.45 - 2904.4) = -2,847,907 J/kg
The negative sign indicates that heat is being removed from the gas, not added. This is because the gas is being cooled from the initial temperature of 2904.4 K to the desired temperature of 245.45 K.
The work required for isothermal compression is given by:
w = R * T * ln(pz/p1)
Where R is the gas constant, T is the temperature (which we assume remains constant during compression), and pz is the desired pressure in the test section. R is 287 J/kg-K, T is 245.45 K, and pz is 20.3 Pa. Therefore:
w = 287 * 245.45 * ln(20.3/101325) = -37,597 J/kg
Again, the negative sign indicates that work is being done on the gas, not by the gas.
To maintain the temperature at Tz during compression, the gas must be compressed slowly enough that it can exchange heat with its surroundings and remain at constant temperature. This is called an isothermal process.
d) If we isentropically compress the ambient air to the desired pressure, the pressure ratio is given by:
p2/p1 = (T2/T1)^(gamma/(gamma-1))
Where T1 is the initial temperature, which is 290.7 K, and T2 is the final temperature, which is 245.45 K. Solving for p2/p1, we get:
p2/p1 = 0.0000366
Multiplying by the initial pressure of 101,325 Pa, we get:
p2 = 3.7 Pa
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ1
Where is a demarc located in relation to the structured cabling of an enterprise environment?
a. at the entrance facility
b. at the Intermediate Distribution Frame (IDF)
c. between the MDF and the IDF
d. in the Main Distribution Frame (MDF)
The demarc is located in the Main Distribution Frame (MDF). The correct option is D.
What is Main Distribution Frame (MDF)?
In telephony, a Main Distribution Frame (MDF) is a signal distribution frame or cable rack that connects and organizes telecommunication wiring between itself and any number of intermediate distribution frames and cabling from the telephony network it serves.
A communications facility's internal equipment is connected to wires and subscriber carrier equipment by the MDF. Each cable used to serve user telephone lines arrives at an MDF where it is distributed to local exchange equipment.
In comparison to a patch panel, an MDF can offer greater freedom when allocating telecommunications facilities at a lower cost. The most typical type of MDF is a lengthy, two-sided steel board.
Learn more about Main Distribution Frame:
https://brainly.com/question/28167078
#SPJ4
what is heating element for dryer ?
Your dryer's heating element, which consists of a metal chamber enclosing a coil of heating wire, will be present if it is electric. In the same way that electricity heats the wire, hot air also heats the chamber.
How can you tell whether your dryer requires a heating element?The cycle will still finish and the dryer will spin if the heating element isn't functioning properly, but it won't become hot enough to help dry the clothing. It is natural for heating elements to degrade with time.
What is the purpose of a heating element?They are used in conventional heating appliances like toasters and hair dryers, industrial furnaces for heating, floors, roofs, pathways for melting snow, dryers, etc.
To know more about heating element visit :-
https://brainly.com/question/29526412
#SPJ4
welding transformer with multiple coils is called what
Welding transformer with multiple coils is called a multi-coil, or multi-winding transformer.
A welding inverter is what?A welding device known as an inverter welder uses solid-state electronic components to increase the efficiency of the conversion of electric current. Converter welding devices are compact, lightweight, and frequently smaller than a lunchbox. Moreover, inverter-based welders frequently have a large number of digital arc adjustability.
A welding inverter is what kind of transformer?The transformer, which is situated inside a machine, is used to transform the high-voltage input, also known as primary power, from of the wall plug. This voltage ranges typically between 208 and 600 voltages, with a moderate alternating (AC) of between 15 and 55 amps.
To know more about transformer visit:
https://brainly.com/question/16971499
#SPJ4
a plant consumes 100 kw of power at 0.9 pf lagging. if the load current is 200 a rms, find the load voltage.
The load voltage can be calculated using the formula: V = (Power / Power Factor) / Current. In this case, we substitute the given values to get: V = (100 kW / 0.9) / 200 A = 500 V.
What is the values ?Values are beliefs, customs, and practices which define how individuals and groups interact with one another. They are established standards of behavior that guide our interactions and decisions, and they can be either personal or shared. Values can include respect, honesty, fairness, responsibility, hard work, compassion, kindness, and cooperation. They provide a framework for making decisions, and they can help create a sense of purpose and meaning. Values can also help us find balance in our lives and can serve as a source of guidance when we need it.
The load voltage is:
V = (100 kW / 0.9) / 200 A = 500 V
To learn more about values
https://brainly.com/question/29663853
#SPJ1
reverse engineering is: a. altering the basic design based on user input. b. reengineering a failing product. c. acquiring a competitor's product and relabeling it for sale. d. changing your mind on the previous design. e. acquiring a competitor's product and studying its design features.
Purchasing a competitor's product and examining its design elements is known as reverse engineering.
What does the product design process of reverse engineering entail?Reverse engineering is a method that examines or recreates a product's design using a physical component as a starting point. Clay models and various kinds of prototypes will be created as part of the design process for a new product in order to test, assess, and validate the conceptual design.
How are engineering design and reverse engineering related?Reverse engineering is the process of figuring out the design and technology utilised to create an end product by working backwards from it. The project owner can duplicate or improve the product using the data gained from this procedure, or they can apply to the development of a complementary product.
To know more about reverse engineering visit:-
https://brainly.com/question/13195746
#SPJ1
When you are a new driver and practicing turning right or left with good traction and normal conditions, your speed should not exceed:
a. 45 to 50 mph
b. Less than 5 mph
c. 5 to 15 mph
d. 25 to 30 mph
When you are a novice driver practicing right or left turns in typical traffic, you shouldn't travel faster than 5 to 15 mph.
What is the ideal starting position for a right turn?Start from the right lane if you are making a right turn. If you are turning onto a highway with more than one lane traveling in the direction you want to go, enter the lane that is the closest to where you want to go.
What should a motorist do when making a right turn?Even if approaching traffic is turning left into the same road as you when you make a right turn from a main road into a minor road, you still need to yield to them.
To know more about novice driver visit:-
https://brainly.com/question/28237872
#SPJ4
what does a plan show about electrical outlets?
The location the type of electrical hardware to be utilized in a home, including meter, transmission panel box, outlets, switch, and other electrical features, are shown on the electricity plan.
What is the name of the electrical socket?Electrical devices can be connected to the electricity grid using electrical outlets, also known as electrical outlets, plugs, and wall plugs. The outlet receives alternating power from the power grid. Industrial and residential outlets are the two main categories.
What purpose how can an electrical outlet serve?Appliances can be put into electrical sockets or outlets to be connected towards the power grid and given power so they can work. Electric shocks, burns, and fires can all be caused by lightning.
To know more about electrical outlet visit:
https://brainly.com/question/8309417
#SPJ4
what does this code print? x = 1 y = 7 for i in range(3): x = 1 print(x)
With a value of 1, this code will print the value of x three times.
What will happen if I am in the range 1/5): print I?# Two-argument example for I in the range (-1, 5) print(i, end=", "), ") # of prints: -1, 0, 1, 2, 3, 4, The increment between the numbers in the range is controlled by the optional step value. Step is always set to 1.
Why is Python's 0.1 0.2 not 0.3?The binary value of 0.2 is similarly recorded as 0.001100110. Today, Python (or some other programming language) transforms 0.1 and 0.2 to its binary form when you add 0.1 + 0.2. The addition is then carried out. The outcome will never exactly equal 0.3.
To know more about code visit:-
https://brainly.com/question/25611043
#SPJ4
which type of facility may require a higher number of accessible spaces than other commercial spaces?
A parking facility for a medical facility, such as a hospital or nursing home, may require a higher number of accessible spaces than other commercial spaces.
What is commercial spaces?Commercial spaces are properties used for business activities. These properties may be rented or owned and can include buildings, warehouses, offices, and other types of storefronts. They are often located in commercial or industrial areas, or in areas with high foot traffic, in order to maximize visibility and potential customers. Commercial spaces are often equipped with the necessary technology and infrastructure to support the businesses that occupy them. Commercial spaces are essential for businesses to thrive and are used to conduct day-to-day operations.
To learn more about commercial spaces
https://brainly.com/question/29705240
#SPJ4
What are the 4 different types of screw heads?
The type of tool you use to install (or remove) the screw heads is referred to as the drive style, or drive recess. The most typical of the numerous that exist.
What are the various screw heads' names?The type of tool you use to install (or remove) the screw is referred to as the drive style, or drive recess. The most popular types of fasteners among the many that are available are: slotted, Phillips, combination (both slotted and Phillips), hex, hex socket, square and spanner.
What type of screw head is most typical?The slotted type of screw drive, the first of its kind to be created, is still the most extensively used screw drive because it is straightforward, affordable, and efficient. There is only one line that runs through the entire design, which gives it its center of the head, where a flat-bladed screwdriver can be inserted.
To know more about screw heads visit:-
https://brainly.com/question/28030363
#SPJ4
the plate is deformed into the dashed shape shown. what is the average normal strain along the diagonal ad?
The diagonal ad's typical strain average is 0.0168.
What is an illustration of typical stress?It describes the relationship between the object's initial length and its length change instead and is a dimensionless feature. For instance, a normal strain measurement of +/- 0.1 indicates that an object's length has either increased by 10% (tensile) or dropped by 10% (compressive) (compressive).
What signifies a typical strain?eBook on mechanics: Normal Strain. The Greek letter stands for strain, which is a phrase used to describe the extension or distortion of a body when it is subjected to a force or collection of forces. In general, the strain of a body is calculated as the length change divided by the beginning length.
To know more about strain visit:-
https://brainly.com/question/17156378
#SPJ1
what is a board foot
Sawmills and producers of timber and lumber products use the board foot as a unit of measurement to precisely determine how much wood may be removed from a log or plank.
Describe a log?This computation can be used to solve engineering issues involving mass and heat transport. A text file called a "server log" keeps track of all activity involving a particular server over a given period of time.
What do servers do?The actual computer which a server programme runs on in a data centre is also usually referred as a servers.
For instance, a Web server just on World Wide Web is indeed a computer that utilises using HTTP protocol to transfer Web content to a browser in response to a client request.
To know more about log visit :
https://brainly.com/question/28596588
#SPJ4
name three criteria for a good location for an air cooled condensing unit?
An air-cooled condensing unit is an important component of an air conditioning system. The following are three criteria for a good location for an air-cooled condensing unit: Adequate Airflow, Level Ground, and Protection from the Elements.
1. Adequate Airflow: An air-cooled condensing unit requires adequate airflow to function properly. The unit must be placed in an area where there is enough space for air to flow around it. This allows the unit to expel the heat it has absorbed from the indoor space. Therefore, the location should be free of any obstructions that can restrict the airflow, such as walls or vegetation.
2. Level Ground: The condensing unit should be installed on level ground. This is because the compressor and other components inside the unit are sensitive to vibrations, and they can become damaged if the unit is not level. A level surface also ensures that the refrigerant flows evenly through the system, which is important for optimal performance.
3. Protection from the Elements: The location of the condensing unit should provide protection from the elements. Exposure to harsh weather conditions can damage the unit and reduce its lifespan. Rain, snow, and direct sunlight can all cause problems, so it's best to install the unit in a protected area, such as under an overhang or in a shaded spot.
To learn more about air-cooled condensing, click here:
https://brainly.com/question/11823314
#SPJ4
A cylindrical rod with a length of 380 mm and a diameter of 10 mm is to be subjected to a tensile load. The rod must not experience plastic deformation or an increase in length of more than 0. 9 mm when a load of 24. 5 kn is applied. Which of the four materials listed in table p1. 13 are possible candidates? justify your answer
The materials which are possible candidates are brass, stainless steel, aluminum and copper is to be subjected to a tensile load.
What is tensile load?Tensile load, also known as tension, is a force applied to an object in order to extend, deform, or disrupt the object. Tensile load is the opposite of compressive load, which compresses or squeezes an object. Tensile load is often used in engineering and material science to measure the strength of a material or object. When a material is subjected to a tensile load, it will stretch and deform until it reaches its breaking point. The amount of force it takes to cause the material to reach its breaking point is known as the tensile strength of the material.
To learn more about tensile load
https://brainly.com/question/13390710
#SPJ1
Which of the following TWO choices would be TRUE characteristics of "democratic" systems of government?
Group of answer choices
Loyalty to a leader
Equal Opportunity
No Due Process
Limited Free Speech
Free and Open Elections
The TWO alternatives would be Genuine hallmarks of "democratic" forms of government: equal opportunity and free and open elections.
What are the two types of democracy that are most prevalent?The two types of democracy that are most prevalent now are representative democracy and indirect democracy. When citizens choose representatives to enact laws on their behalf, this is known as indirect democracy or representative democracy.
What two forms of democratic government exist?A representative democracy that upholds the rule of law and protects people's rights to their property is referred to as a liberal democracy. The ability of elected representatives to rule however they choose is weakly or not at all constrained in an illiberal democracy.
To know more about democratic visit:-
https://brainly.com/question/30189685
#SPJ1
What is a CSE Citation Generator?
An online application known as a CSE citation generator produces citations using the Council of Science Editors (CSE) citation style.
This is accomplished automatically by entering a document identifier, such as a website URL, book ISBN, or journal DOI, and correctly formatting the citation using the remaining information.
The Council of Science Editors, a nonprofit organization, developed the CSE citation format. The CSE Scientific Style and Format Manual, which is now in its eighth edition, is where the CSE style rules are published.
The CSE style has three different ways to properly reference sources. They shouldn't be together (format all citations the same way).
The author's name and year of publication are enclosed in parenthesis and placed next to the referenced text as an in-text citation, also known as author-date or name-year. The author's last name is used to sort the reference list at the conclusion of the article.
To know more about CSE:
brainly.com/question/30404187
#SPJ4
what are the two basic methods of protecting exterior joints?
1.) Use of sealants—seals the connections between building components. To prevent the infiltration of moisture, air, or other corrosive particles, the joints are sealed. Sealant is a substance that adheres to joint surfaces and hardens into a firm rubbery substance.
2.) The use of prefab coverings, which are often metal and designed to accommodate the joint's anticipated movement. Despite the joints' ability to move, the materials' integrity during assembly should be guaranteed.
Joint sealants play a significant role in the protection of modern commercial facilities against water damage to structures and their contents. While many commercial designs use water-shedding features like lap siding, overlapping flashings, and sloped roofs, many residential structures do not; as a result, there is little to no protection against leaking if a joint sealant fails.
Regrettably, there are several instances during the design and construction process in today's building environment where the poor judgment or inappropriate behavior leads to sealant failure.
For aesthetic and cleanability reasons (on interior surfaces where water resistance is not a concern) as well as to stop sound from traveling through cracks, open joints are sealed using joint sealants (usually interior and internal to composite assemblies).
To know more about sealants:
brainly.com/question/14413264
#SPJ4
what pilot certification and aircraft equipment are required for operating in class c airspace?
To fly in Class C airspace, no special pilot licence is needed.
What is a pilot known as?A individual who uses an airplane's directional flying instruments is known as an aviation pilot or aviator. Due to their involvement in running the aircraft's guidance and engine systems, some other members of the aircrew, such as navigators as well as flight crew, are also regarded as aviators.
How long does the instruction take to become a pilot?The optimal length of time to train as a pilot is 3–4 years to earn a bachelor of science in commercial flight. It is better to wait until you reach at least 18 years old to start your journey because getting a degree is great for regularity of training.
To know more about Pilot visit:
https://brainly.com/question/27961960
#SPJ4
this electronic engineer is known for leading the team that created the first commercial video game cartridge. who is he?
Answer:
The electronic engineer who is known for leading the team that created the first commercial video game cartridge is Jerry Lawson. He led the engineering team that developed the Fairchild Channel F, which was released in 1976 and is considered to be the first video game console with interchangeable cartridges.
a 250 kg drum with a 750-mm diameter is supported by bar ab and cable bc as shown. please determine the forces on each element
The force on the element will be 2452.5 Newton and 3468.4N.
How to calculate the ForceForce is a physical concept that describes the influence that one object exerts on another. It can cause a change in the motion or shape of an object. Force is typically measured in units of Newtons (N) and is represented as a vector quantity, meaning it has both magnitude and direction.
According to Newton's laws of motion, an object will remain at rest or in uniform motion in a straight line unless acted upon by a net external force. Force can be exerted through a variety of means, including through contact, such as pushing or pulling, or through non-contact means, such as gravity or electromagnetic fields.
ΣFy =0
N₂ sin 45° = W
N₂ 250×9.81/ sin 45°
N2 =3468.4N
N1 = N₂ cos 45°
N1 = 2452.5 N
Learn more about force on
https://brainly.com/question/12785175
#SPJ1
What is ADA door clearance?
When a door is opened to a 90-degree angle, the amount of clear space required between the face of the door and the opposite stop or surface is referred to as ADA door clearance.
What does ADA spacing mean for stores?Aisles must be at least 60 inches wide to allow room for passing other customers and at least 36 inches wide if they are longer than 200 feet. Keep an eye out for aisle displays and provide adequate room to pass around them. When placing any kind of furniture or objects in an open area, you still need to make sure that there is a lane of travel that is at least 36 inches wide throughout the area, according to Stein. 30 x 48 inches of clean floor space must be available to fit a single stationary wheelchair and its occupant (760 mm by 1220 mm). The wheelchair-accessible minimum floor or ground space may be positioned for forward.
To Know more about Clearance Visit:
brainly.com/question/30034723
#SPJ4
A chemical laboratory has a series of four workbenches. Each workbench has a fume hood overhead. The fume hoods are used to remove any dangerous gases that come from the chemicals on the workbench. The air in each hood must travel at least at 10 feet per second to guarantee safety. The air flow at each hood is controlled by a damper. The air is drawn in by a fan and then forced through a filter.
Routine measurements on the four hoods show that one hood is running less than the required 10 ft./sec. The dampers on that hood are already open all the way. You have tried adjusting the damper on the other hoods, but they are all just barely over 10 ft./sec. Any changes on those hoods will cause problems.
Drawing showing Damper A at 9.1 psi, Damper B is at 10.1, Damper C is 10.3, and Damper D is at 10.2. Next is the fan and the filter.
How should you try to fix the problem?
A. Open Damper B some more.
B. Open all the dampers some more.
C. Buy a larger fan.
D. Clean the filter.
It seems unlikely that opening the dampers on the other hoods more will significantly enhance the airflow in the one that is operating at less than 10 ft/sec if they are already barely over that speed.
Why do chemical reactions occasionally take place in a safety hood as opposed to on a lab bench?During chemical manipulations, fume hoods are specifically made to provide ventilation for the safety of lab users. They produce a lot more airflow than is necessary for storage.
What is the safest minimal working distance from the fume hood's opening?Always work at least 6 inches inside the fume hood's aperture. Don't alter the fume hood. Don't block off the baffle exhaust.
To know more about airflow visit:-
https://brainly.com/question/28346881
#SPJ1
when creating inside corners on milled and turned parts, chamfered and sharp edges are preferred over fillet radii.
True or False
Rather of using fillet radii, chamfered and sharp edges are preferred when constructing inside corners on milled and turned items. Cutting speed and tool life have a linear connection when determining useful tool life.
What does chamfered mean in terms of edges?
The sloped or angled edges or corners of a part design are known as chamfers. It is the fillet's opposite. A chamfer is sharply angled and straight, as opposed to being curved. Mechanical engineering and manufacturing both frequently use this phrase. The middle French word chamfrein, which is related to the bevelled edge, is where the word chamfer originated. To put it in much simpler terms, a bevel is an edge that is sloped, and a chamfer is an edge that is a bevelled edge that joins two surfaces. This includes creating an angled cut along the edge of a piece of material. The word "bevel" has been applied there as an adjective.
Know more about engineering Visit:
https://brainly.com/question/14094488
#SPJ4
FILL IN THE BLANK. a thermostat will ___________ when it is satisfied
When a thermostat is satisfied, it will open.
What is the purpose of a thermostat?thermostat: a device that monitors temperature fluctuations with the aim of keeping an enclosed space's temperature essentially constant. When the temperature rises or falls above or below the desired level in a system that also includes relays, valves, switches, etc., the thermostat generates signals typically electrical ones.
What does an AC thermostat do?The thermostat shows the ambient temperature and uses this data to turn on and off your HVAC system. Its objective is to regulate the system so that, when you adjust the temperature inside your home, it does so with just the right amount of warm or chilly air.
To know more about thermostat visit:-
https://brainly.com/question/27269379
#SPJ4
A thermostat will open when it is satisfied. Thus, the correct word for the blank is open.
What is the purpose of a thermostat?Thermostat: a device that monitors temperature fluctuations with the aim of keeping an enclosed space's temperature essentially constant. When the temperature rises or falls above or below the desired level in a system that also includes relays, valves, switches, etc., the thermostat generates signals typically electrical ones.
What does an AC thermostat do?The thermostat shows the ambient temperature and uses this data to turn on and off your HVAC system. Its objective is to regulate the system so that, when you adjust the temperature inside your home, it does so with just the right amount of warm or chilly air.
To know more about thermostat visit:-
brainly.com/question/27269379
#SPJ4
Which flower should be your focal flower in a triangular arrangement?
answer choices
a. the focal can be any flower
b. the smallest least open flower
c. the flower that is a different color from the others
d. the largest, most open flower
Answer: A
Explanation:
a computer is a single device that performs different types of tasks for its users. true or false?
False . An individual gadget known as a computer is capable of carrying out many activities for its users. Every program is typically kept in ROM, and as they are used, they are loaded into RAM.
A microprocessor's instruction set is distinct and often only understood by other microprocessors of the same brand. Computer systems consist of a computer, as well as extra hardware and software. Central processing unit (CPU), memory, input/output, and storage devices are the four main components of a computer system. To produce the intended result, all of these parts operate in concert as a single unit. The term "program" refers to a collection of guidelines that a computer follows to carry out a task. In general, "software" is used to describe the well-developed programs;
Learn more about users here:
https://brainly.com/question/30175564
#SPJ4
the specialty cruise has a pirate theme and goes on fun missions. cruise members become part of the crew. use the following business rules for the cruise database:
1) ParrotID
2) EmployeeID
3) DependentID
4) ShipID
5) MissionID
Note: each table has one primary key.]
Why is the ParrotID used?To independently identify records in a table, primary keys are used. EmployeeID is unique to each employee, including captions and crew. In Table Captain, employeeID will become a foreign key because it serves as a primary key in Table Employee.
Since Captain has a parrot, parrotID can be used to uniquely identify records in the Captain table.
EmployeeID is unique for all employees, including captains and crew, so this will be used as the primary key to uniquely identify a record.
Here, employeeID will be a foreign key because it serves as a primary key in table employee. Since it is mentioned that only the crew members have dependents, dependentID will serve as a primary key to uniquely identify a record in table Crew.
To put it in a simple term, ShipID serves as a primary key because it is unique for every ship and thus uniquely identifies a record.
Since it is a given that each mission has a unique number, missionID serves as the primary key.
note: ShipID serves as a foreign key constraint in the ShipMissions table.
Read more about database here:
https://brainly.com/question/518894
#SPJ1
what do all good orienteering compasses have?
A accurate orienteering compass has these features: Clear base plate that approves you to see the map underneath. Straight aspects for aligning two factors or for drawing lines. Liquid-filled needle housing that keeps the magnetic needle incredibly consistent when taking readings.
What do all exact orienteering compasses have waterproof?A compass should have all the facets of a accurate orienteering compass. It should be water resistant and have a liquid-filled needle case. It have to additionally have an adjustable needle. There are many one of a kind types of orienteering compasses, so it's crucial to lookup the exceptional one before you buy.
What are the 5 components of orienteering compass?ANSWERS: Orienteering Arrow.
Base Plate. Compass Dial.
Magnetic Needle. Orienteering Lines.
Ruler. Direction of Travel Arrow.
Learn more about good orienteering compasses here;
https://brainly.com/question/29605607
#SPJ4
Building high-morale organizations and building communication networks that include employees are both elements ofA) ISO 9000 certification.B) Six Sigma certification.C) employee empowerment.D) the tools of TQM.
C) Building high-morale organizations and building communication networks that include employees are both elements of employee empowerment.
Giving employees the power, responsibility, and autonomy to take charge of their own decisions and find solutions is a process known as employee empowerment. Only when an organisation has confidence in a worker's capacity for making decisions is it feasible. The organisation helps people by providing the tools they need to follow through on these choices. They don't have management or their direct supervisors controlling or interfering with their work. Employees are more likely to take ownership of their duties, become more responsible, and put forth more effort to reach their objectives when an organisation gives them greater control.
To know more about employee empowerment:
https://brainly.com/question/24113378
#SPJ4
what necessitated the inhabitants of neolithic jericho to construct fortification walls?
What drove the people of Prehistoric Jericho to build fortress walls Defend against marauding nomads.
What are some prehistoric examples?
The Neolithic Revolution, Neanderthals and Denisovans, Stonehenge, the Ice Age, and other events are all part of prehistory, the vast span of time before written records or human recordkeeping.
The Paleolithic Age is the Stone Age's earliest and longest epoch. This is derived from the Greek words palaios, which means "long ago" or "old," and lithos, which means "stone" – when combined, Paleolithic Era means Old Stone Age. This is what our ancestors may have looked like over three million years ago.
Know more about fortress walls Visit:
https://brainly.com/question/27587706
#SPJ4