if the arm processor has a circuit optimized for addition and subtraction, e.g., the alu adder/subtractor, and it has the ability to set a flag if the output of the alu is negative, write a pseudo-code algorithm for implementing the absolute subtraction routine on the arm processor. assume that you do not have the ability to multiply by -1 (you only have addition and subtraction capabilities).

The translated code for we will check that variables m, n, p, and q (in that order) have been changed only according to what changes the C code says should have happened as:

#int m: $12

#int n: $13

#int p: $14

#int q: $15

mul $12,$14,5 # m = p*5

not $8,$13 #get ~n

or $12,$12,$8  # m = p * 5 | ~n;

An operator is a symbol or phrase that can be used to carry out particular operations on variables and values. They are used to carry out operations like addition, subtraction, multiplication, and division in logic, mathematics, and programming languages.

They can also be used to perform logical operations like and, or, and not, assign values to variables, compare values, and so on. Depending on the number of operands they take, operators can be either unary, binary, or ternary. One operand is required for a ternary operator, two for a binary operator, and three for a ternary operator. Programming relies on operators, which can help code be more concise and effective.

Learn more about operators:

brainly.com/question/29673343

#SPJ1

Due to the fact that you are paying the payment out of your bank account, the payment is computed as a negative sum. Use a minus sign before the PMT function to display the result as a positive integer.

Financial Excel functions include the PMT Function[1]. The function aids in determining the total payment (principal and interest) necessary to pay off a loan or investment with a fixed interest rate over a predetermined period of time.

PV = present value, and FV=PMT(1+i)((1+i)N - 1)/i Future Value (FV) Payment per period (PMT) I = percent per period interest rate N is the number of cycles.

To know more about computed visit:-

https://brainly.com/question/15707178

#SPJ1

This is an example of a traceroute, which is a diagnostic tool used to show the path a packet takes from its source to its destination. This traceroute shows the route from 192.168.1.1 to 209.85.248.178.

Diagnostics is the process of examining and testing a system or device to identify issues, diagnose problems, and assess the overall health of the system or device. This process can involve analyzing data from a variety of sources, such as system logs, error messages, and performance metrics. It can also involve running specific tests or using tools to analyze a system or device for potential problems.

The first line shows the initial hop from 192.168.1.1. The next three lines show the next three hops, which are 10.4.144.1, 68.9.8.225, and ip68-9-7-65.ri.ri.cox.net, respectively. Each line shows the hop IP address, followed by the round trip time (RTT) in milliseconds (ms) taken to reach the hop. The next three hops are ip98-190-33-42.ri.ri.cox.net, ip98-190-33-21.ri.ri.cox.net, and provdsrj01-ae3.0.rd.ri.cox.net. The ninth hop is 209.85.248.178, which is the destination.

To learn more about diagnostic
https://brainly.com/question/29354734
#SPJ1

The persuasion includes four basic elements, they are the source, receiver, message and channel. The cognitive route which involves the direct cognitive processing of a message's content is the central route. The correct option is A.

The persuasion is defined as a process in which one person or entity tries to influence another person or group of people to change their beliefs or behaviours. There are two primary routes to persuasion.

The central route uses facts and information to persuade potential consumers whereas the peripheral route uses positive association like beauty, fame and emotions.

Thus the correct option is A.

To know more about persuasion, visit;

https://brainly.com/question/29354776

#SPJ1

The programme uses individual variables instead of a single list of students to hold the names of each student.

i < list[list.length]

A variable is a value in programming that is subject to change based on external factors or data that has been passed into the programme. A programme typically consists of data that it uses while operating and instructions that specify what to do to the computer.

A variable is said to be independent if its value is never dependent on anything but the researcher. A variable is said to be dependent if one variable influences another's value.

To know more about individual variables visit:

https://brainly.com/question/29891976

#SPJ1

Correct question is:

Which of the following will result in ONLY all the items in list being printed to the console if placed where the program reads <INSERT CODE> and the program is run?

A. i < list[list.length]

B. i < list.length

C. i < list[0]

D. i < list[1]

Note tha the required code in Java is:

import java.util.Scanner;

public class CharacterCount {

   public static void main(String[] args) {

       Scanner scnr = new Scanner(System.in);

       // Get the character and the string from the user

       System.out.print("Enter a character: ");

       char ch = scnr.nextLine().charAt(0);

       System.out.print("Enter a string: ");

       String str = scnr.nextLine();

       // Count the number of times the character appears in the string

       int count = 0;

       for (int i = 0; i < str.length(); i++) {

           if (str.charAt(i) == ch) {

               count++;

           }

       }

       // Output the result

       System.out.print(count + " " + ch);

       if (count != 1) {

           System.out.print("'s");

       }

   }

}

The program first prompts the user to enter a character and a string. It then uses a for loop to iterate through the string and count the number of times the character appears.

Finally, it outputs the result in the format specified in the problem statement, including the input character and using the plural form if necessary.

Learn more about Code at:

https://brainly.com/question/28848004

#SPJ1

It is true that the primary benefit of secondary storage is its ability to preserve data even when the computer's power is switched off for extended periods of time.

Because secondary storage is non-volatile and, in contrast to main storage, cannot be directly accessed by a central processing unit, it is the greatest option for permanently storing data. Secondary storage is often referred to as auxiliary storage.

Why is computer secondary storage required? used to backup data from primary storage or main memory. saves programs, data, and other files that might otherwise be lost if the power was turned off if the RAM became volatile or was unable to permanently retain data.

To know more about secondary memory visit:-

https://brainly.com/question/15497243

#SPJ1

The ability of secondary storage to maintain data even when the computer's power is turned off for extended periods of time is its main advantage. Thus, it is true.

Secondary storage is the best choice for permanently storing data because it is non-volatile and, unlike main storage, cannot be directly accessed by a central processing unit. Auxiliary storage is another name for secondary storage.

To back up information from the main memory or primary storage. Prevents the loss of data, programs, and other files that would be lost if the power was switched off if the RAM became volatile or was unable to store data permanently.

Therefore, it is true The hard disk is the primary storage type used in contemporary computers. As internal storage devices, hard drives are frequently bundled with computers today, and they can be either spinning disks or solid-state drives.

Learn more about storage here:

https://brainly.com/question/30434661

#SPJ1

A clustered bar chart is a type of chart that displays multiple bars side-by-side within each category, with each bar representing a different data series.

How can you create a clustered bar-chart using Excel?

To create a clustered bar chart using the recommended charts feature in Excel, you can follow these steps:

In this case, the chart will show two data series side-by-side for each category.

The X-axis will show the categories (which will be the values in column A), and the Y-axis will show the values for each data series (which will be the values in columns B and D).

This type of chart is useful for comparing the values of different data series within each category.

By placing the bars side-by-side, it is easy to see the differences between the values for each data series.

The chart can be customized with different colors, labels, and other formatting options to make it easier to read and interpret.

To know more about bar chart, visit: https://brainly.com/question/30657255

#SPJ1

Answer:

WLAN

Explanation:

wireless local area network (WLAN) is relatively inexpensive to install and is well-suited to workgroups and users who are not anchored to a specific desk or location.

The list that correctly sorts block numbers from lowest to highest is the 03CE1B, 0A8FE3, 742EE8, 8FD758, 935041, and BF0402.

As presented on a verification statement or search result, block numbers are the numbers that are proportionately assigned to a segment of collateral, debtor, or secured party information in the Registry's records.

The context of this question indicates that 03CE1B, which begins with zero, is the lowest range and BF0402, which describes the numeral 402 and an initial sequence of BF, is the largest range.

These blocks' numbers might be created so that they mention the information in accordance with how it is categorized.

Therefore, The list that correctly sorts block numbers from lowest to highest is the 03CE1B, 0A8FE3, 742EE8, 8FD758, 935041, and BF0402.

To learn more about block numbers, refer to the link:

https://brainly.com/question/14409664

#SPJ1

Public Car(String myMake, String myModel), / implementation not shown / private String make, private String model

Which statement best sums up what the arrayMethod() method does to the array nums? C. The method call, which was effective before to the update, will now result in a run-time error because it tries to access a character in a string whose last element is at index 7, which is where the problem will occur.

When a class instance is created, a function Object() { [native code] } method is automatically called. In most cases, constructors carry out initialization or setup tasks, like saving initial values in instance fields.

To know more about String visit:-

https://brainly.com/question/15243238

#SPJ1

Here's a Python program that will read the dimensions of the block and the house from the user, compute the area of the lawn, and then display the time it would take to mow the lawn at a rate of 2 square meters per minute:

# read the dimensions of the block

block_length = float(input("Enter the length of the block (in meters): "))

block_width = float(input("Enter the width of the block (in meters): "))

# read the dimensions of the house

house_length = float(input("Enter the length of the house (in meters): "))

house_width = float(input("Enter the width of the house (in meters): "))

# compute the area of the lawn

lawn_area = (block_length * block_width) - (house_length * house_width)

# compute the time to mow the lawn

mowing_time = lawn_area / 2

# display the result

print("The time required to mow the grass around the house is:", mowing_time, "minutes")

The program uses the input() function to read the dimensions of the block and the house from the user, and then uses the formulas (block_length * block_width) and (house_length * house_width) to compute the area of the block and the house, respectively. The program then subtracts the area of the house from the area of the block to get the area of the lawn.

Finally, the program uses the formula lawn_area / 2 to compute the time it would take to mow the lawn at a rate of 2 square meters per minute, and displays the result using the print() function.

The recent technological advancements have been able to keep up with Moore's Law, despite the limitations that arise from the physical properties of silicon.

Moore's Law is the observation made by Gordon Moore, co-founder of Intel Corporation, in 1965 that the number of transistors on a microchip doubles every 18-24 months, which leads to a decrease in the cost and size of electronic devices while improving their performance.

While there have been predictions that Moore's Law would eventually come to an end as transistors reach their physical limits, it is not necessarily true that it will "exhaust itself" or that it is based on the limitation of silicon.

Read more about Moore's law here:

https://brainly.com/question/28877607

#SPJ1

ptical scanning techniques and magnetic scanning techniques are used to convert hard copy documents or images into a digital format for input into a computer system. Here are three different optical scanning techniques and two magnetic scanning techniques, along with an example for each:

Optical Character Recognition (OCR): OCR is a technique used to convert printed or handwritten text on paper documents into digital text that can be edited, searched, and stored electronically. OCR technology uses pattern recognition to identify characters in scanned images and then translates them into digital text. An example of OCR is the process of scanning a physical book into an e-book format.

Optical Mark Recognition (OMR): OMR is a technique used to read pencil or pen marks made in specific areas on paper forms. OMR technology detects the presence or absence of marks in specific fields, such as checkboxes, bubbles, or grids, and converts them into a digital format that can be processed by a computer. An example of OMR is the process of scanning paper-based surveys that respondents fill in by filling out bubbles or checkboxes.

Optical Character Verification (OCV): OCV is a technique used to verify the accuracy of printed or handwritten text in scanned images by comparing it to a reference database. OCV technology uses image analysis and pattern recognition to identify characters in scanned images and then compares them to a known reference database of correct characters. An example of OCV is the process of verifying the accuracy of serial numbers on manufactured goods during quality control checks.

Magnetic Ink Character Recognition (MICR): MICR is a technique used to read magnetic ink characters printed on paper documents such as checks. MICR technology reads the magnetic ink characters and converts them into a digital format that can be processed by a computer. An example of MICR is the process of depositing a check by scanning it at an ATM.

Magnetic Stripe Reader (MSR): MSR is a technique used to read data stored on magnetic stripes on credit cards, ID cards, and other similar cards. MSR technology reads the magnetic stripe and converts the data into a digital format that can be processed by a computer. An example of MSR is swiping a credit card at a point-of-sale terminal to pay for a purchase.

These are just a few examples of the many different scanning techniques that are used for input. The choice of scanning technique depends on the type of document or image being scanned, the accuracy required, and the intended use of the digital data.

This programme assumes that the input phrase is a string with just spaces in between words for punctuation. You might need to preprocess the input if it contains additional punctuation, like commas or periods.

You can remove the punctuation using a regular expression or the is alnum() function in Python. It is effective: >>> "With a dot." Node(None, string.

Definitely an acronym: words = phrase. if word[0] then split() acro = " for word in words. isupper(): word[0] + acro

Elif phrase.

isupper(): word[0] + acro

return acro if acro += "."

Use this syntax to print the acronym "Institute of Electrical and Electronic Engineers" as an example. i.e.e. print(acronym("association for computing machinery")) is the output. # Result: a.m.

To know more about programme visit:-

https://brainly.com/question/30307771

#SPJ1

Organizations can benefit from a hybrid cloud platform in many ways, including increased flexibility, more deployment options, security, compliance, and maximising the use of their existing infrastructure.

It guarantees that the company depends solely on one supplier. It combines the advantages of private and public Cloud service providers. It ends reliance on any private Cloud service providers. It enables companies to give other companies access to their data.

Enterprises need to select the best hybrid cloud architecture in terms of cost, performance, and administrative simplicity now that there are two different hybrid cloud architectures—heterogeneous and homogeneous.

To know more about hybrid visit:-

https://brainly.com/question/28029342

#SPJ1

Answer:
To defend a Wi-Fi network from attackers, you should use strong encryption, enable strong passwords, and enable two-factor authentication. You should also disable WPS and MAC filtering, enable a firewall, and regularly update your router's firmware. Additionally, you should consider using a virtual private network (VPN) to protect your network traffic and prevent attackers from accessing your Wi-Fi network. Finally, you should also keep an eye out for suspicious activity on your network and be aware of the latest security threats.

Answer:

Basically a bump at the end of a bridge

Explanation:

Settlement is the downward decline of the ground (soil) when a load is applied to it. In this case the decline ate the end of a bridge.

I'm assuming that you want a program written in x86 assembly language for Intel-based computers. Here's a program that reads the user's first and last names, each on a separate row, and then concatenates them together and outputs the result:

section .data

   firstname db 10    ; buffer for first name

   lastname db 10     ; buffer for last name

   space db " "       ; space character

   message db "Hello, "    ; output message

section .bss

   fullname resb 21   ; buffer for full name (max length 20)

section .text

   global _start

_start:

   ; Read first name

   mov eax, 3      ; read system call

   mov ebx, 0      ; standard input

   mov ecx, firstname   ; buffer

   mov edx, 10     ; maximum length

   int 0x80        ; call kernel

   ; Read last name

   mov eax, 3      ; read system call

   mov ebx, 0      ; standard input

   mov ecx, lastname    ; buffer

   mov edx, 10     ; maximum length

   int 0x80        ; call kernel

   ; Concatenate first name and last name

   mov edi, fullname    ; destination buffer

   mov esi, firstname   ; source buffer

   call copy_string     ; copy first name

   mov byte [edi], 0    ; null-terminate

   mov eax, edi         ; set destination for second copy

   mov esi, space       ; source buffer

   call copy_string     ; copy space

   mov eax, edi         ; set destination for third copy

   mov esi, lastname    ; source buffer

   call copy_string     ; copy last name

   ; Output message and full name

   mov eax, 4      ; write system call

   mov ebx, 1      ; standard output

   mov ecx, message    ; message string

   mov edx, 7     ; length of message

   int 0x80        ; call kernel

   mov eax, 4      ; write system call

   mov ebx, 1      ; standard output

   mov ecx, fullname   ; full name string

   mov edx, 20    ; maximum length of full name

   int 0x80        ; call kernel

   ; Exit program

   mov eax, 1      ; exit system call

   xor ebx, ebx    ; return value

   int 0x80        ; call kernel

copy_string:

   ; Copy a null-terminated string from esi to edi

   push ebx

   mov ebx, eax    ; save destination address

   mov ecx, esi    ; source address

   cld             ; clear direction flag (forward copy)

   rep movsb       ; copy string

   pop ebx

   ret

Here's an explanation of how the program works:

The program is written in x86 assembly language and runs on an Intel-based processor. It uses the standard input/output (I/O) system calls provided by the operating system to read input from the user and write output to the screen.

The program first sets up the stack pointer and saves any registers it needs to use. It then prompts the user to enter their first name by writing the message "Enter your first name: " to the screen using the standard output (stdout) system call.

Next, the program calls the standard input (stdin) system call to read up to 10 bytes of input from the user, which is stored in the buffer named "first_name". The program then clears the input buffer by setting all its bytes to zero.

The program then prompts the user to enter their last name by writing the message "Enter your last name: " to the screen using the stdout system call. It then calls the stdin system call to read up to 10 bytes of input from the user, which is stored in the buffer named "last_name". Again, the program clears the input buffer.

Finally, the program writes the user's name to the screen using the stdout system call, which concatenates the first and last names and outputs them as a single string. The program then restores any registers it modified and terminates.

In summary, the program reads the user's first and last name from the keyboard, concatenates them together, and then outputs the result to the screen.

MariaDB, MySQL, PostgreSQL, and Oracle are the following SQL databases.

A database is a systematic collection of data. They make it possible to manipulate and store data digitally. Databases simplify data administration. Consider a dataset as an illustration. In quite an online telephone directory, a database is utilized to store information about persons, their phone numbers, and other forms of contact.

A SQL database, often known as a relational database, is made up of a number of highly organized tables where each row represents a certain type of data item and each column designates a particular field of data. Rdbms are developed using the structure of queries (SQL) to produce, store, update, store retrieve information.

To know more about Databases visit:

https://brainly.com/question/25198459

#SPJ1

The complete question is-

Which of the following are SQL databases? (Select all that apply.)

a. MongoDB

b. MariaDB

c. MySQL

d. PostgreSQL

e. CouchDB

f. Oracle

The best multiple display option to select when teaching would be "Duplicate these displays". This option will duplicate the content displayed on your laptop screen onto the projection screen, making it easier for everyone in the classroom to see the same content as you.

What is a Projection screen?

A projection screen is a specialized surface used to display images or video that are projected from a projector. It is typically a flat surface that reflects the projected light and displays the image or video clearly to the audience.

Projection screens come in various sizes and materials, ranging from small portable screens to large fixed screens in auditoriums or movie theaters. For example, a projection screen could be a white wall or a fabric screen mounted on a tripod stand.

To learn more about projector, visit: https://brainly.com/question/19486217

#SPJ1

The 25th, 50th (median), and 75th percentiles for X2 are 4.7, 5.5, and 6.5, respectively and the 20th and 80th percentiles for X3 are 8.0 and 11.5, respectively (rounded to 1 decimal place).

How to calculate the Percentile?

A. To calculate the 25th, 50th, and 75th percentiles for X2:

         3.4, 4.1, 4.5, 4.7, 5.0, 5.1, 5.5, 5.8, 6.0, 6.2, 6.5, 7.1, 8.0

         25th percentile: (25/100) * (13 - 1) + 1 = 4.25, rounded up to 5

         50th percentile (median): (50/100) * (13 - 1) + 1 = 7

         75th percentile: (75/100) * (13 - 1) + 1 = 9.5, rounded up to 10

       25th percentile: PERCENTILE.INC(B2:B14, 0.25) = 4.7

       50th percentile (median): PERCENTILE.INC(B2:B14, 0.5) = 5.5

       75th percentile: PERCENTILE.INC(B2:B14, 0.75) = 6.5

Therefore, the 25th, 50th (median), and 75th percentiles for X2 are 4.7, 5.5, and 6.5, respectively.

B. To calculate the 20th and 80th percentiles for X3:

        7.2, 7.5, 8.0, 8.5, 9.0, 9.5, 9.8, 10.1, 10.4, 11.0, 11.5, 12.0, 12.5

        20th percentile: (20/100) * (13 - 1) + 1 = 3.4, rounded up to 4

        80th percentile: (80/100) * (13 - 1) + 1 = 10.4

        20th percentile: PERCENTILE.INC(C2:C14, 0.2) = 8.0

        80th percentile: PERCENTILE.INC(C2:C14, 0.8) = 11.5

Therefore, the 20th and 80th percentiles for X3 are 8.0 and 11.5, respectively (rounded to 1 decimal place).

To know more about median, visit: https://brainly.com/question/30410402

#SPJ1

C) the set of bit strings that end with 00 , the set of bit strings that end with 01 , the set of bit strings that end with 10, and the set of bit strings that end with 11.

Strings are sequences of characters, such as letters, numbers and symbols. Strings are a type of data in programming, and are used to store information such as words, sentences, numbers, and other data types. They can be used to perform calculations, store values, and make comparisons. Strings are also used to store information in databases, and to create user interfaces. Strings are usually declared in quotation marks, and can be manipulated by various functions within a programming language. String manipulation can involve concatenation, slicing, and searching.

This collection of subsets is a partition of the set of bit strings of length 8 because all of the bit strings of length 8 are included in one of the subsets, and none of the subsets overlap. Each subset contains all the bit strings with a particular ending (00, 01, 10, or 11). These subsets together cover all the possible bit strings of length 8.

To learn more about  strings
https://brainly.com/question/29961657
#SPJ1

Answer:

If a device has obtained an IP address using Link Local, its IP configuration will be within the 169.254.0.0/16 subnet.

Explanation:

The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254 if a device received an IP address. 0.0/16

A link-local address is a unicast network address that is valid only for communications within the subnetwork to which the host is linked. Link-local addresses are typically issued automatically by a method known as stateless address autoconfiguration or link-local address autoconfiguration,[1] sometimes known as automatic private IP addressing (APIPA) or auto-IP. As a result, routers do not forward packets that have link-local source or destination addresses. IPv4 link-local addresses are assigned from the address block 169.254.0.0/16.

The Address Resolution Protocol (ARP) is used to convert between Layer 2 MAC addresses and Layer 3 IP addresses.ARP resolves IP addresses to MAC addresses by requesting, "Who owns the IP address 192.168.2.140, please inform me?" They are assigned from the block that may be configured inside its subnet.ARP resolves IP addresses to MAC addresses by requesting, "Who owns the IP address 192.168.2.140, please inform me?" They are assigned from the block that may be configured inside its subnet .ARP resolves IP addresses to MAC addresses by requesting, "Who owns the IP address 192.168.2.140, please inform me?" They are assigned from the block that may be configured inside its subnet.

ARP resolves IP addresses to MAC addresses by requesting, "Who owns the IP address 192.168.2.140, please inform me?" They are assigned from the block that may be configured inside its subnet.

We are going to write a program that can print out all the environment variables in the current process.

Set-UID is an important security mechanism in Unix operating systems. When a Set-UID program runs, it assumes the owner's privileges. For example, if the program's owner is root, then when anyone runs this program, the program gains the root's privileges during its execution. Set-UID allows us to do many interesting things, but it escalates the user's privilege when executed, making it quite risky.

Although the behaviors of Set-UID programs are decided by their program logic, not by users, users can indeed affect the behaviors via environment variables. To understand how Set-UID programs are affected, let us first figure out whether environment variables are inherited by the Set-UID program's process from the user's process.

#include<stdio.h>

#include<stdlib.h>

extern char **environ;

void main()

{

   int i = 0;

   while(environ[i] != NULL) {

       printf("%s\n", environ[i]);

       i++;

   }

}

Learn more about Set-UID

https://brainly.com/question/6437006

#SPJ1

Answer:

Explanation:

arr = [0, 2, 3, 5, 4]

x = 1

arr.append(x)

sorted_arr = sorted(arr)

print(sorted_arr)

Answer:

Explanation:

Analog and hybrid computers are both types of computers that can be used for a variety of applications. Here are some similarities between analog and hybrid computers:

Both analog and hybrid computers use physical quantities to represent numerical data. In an analog computer, physical quantities such as voltage, current, or resistance are used to represent numerical values. In a hybrid computer, both analog and digital components are used to represent numerical data.

Both analog and hybrid computers can perform mathematical calculations in real-time. Analog computers use electronic circuits that can perform mathematical operations continuously and in real-time, while hybrid computers combine the fast processing power of digital components with the continuous nature of analog circuits.

Both analog and hybrid computers are used in specialized applications. Analog computers are used in applications such as control systems, process control, and simulation of physical phenomena, while hybrid computers are used in applications such as weather forecasting, aerospace engineering, and fluid dynamics.

Both analog and hybrid computers have a relatively low accuracy compared to digital computers. Analog computers can introduce errors due to component tolerance and noise, while hybrid computers can introduce errors due to the conversion between analog and digital signals.

Both analog and hybrid computers have been largely replaced by digital computers in many applications. Digital computers are more flexible, accurate, and easier to program than analog and hybrid computers. However, analog and hybrid computers are still used in some specialized applications where their unique capabilities are valuable.

Customers are higher than sales, and both are rising at a 45-degree angle, but customers are only halfway as high as sales.

It is a 24-hour online shopping occasion that was initially developed by companies to entice customers to purchase online and is now frequently viewed as a continuation of the Black Friday deals. Start your Shopify free trial today!

How Much Did Americans Spend Online Overall on Cyber Monday in 2022? According to Adobe Analytics, the U.S. generated $11.3 billion in total online sales on Cyber Monday 2022. 10 As a result, Cyber Monday 2022 became the greatest internet shopping day ever.

To know more about customers visit:-

https://brainly.com/question/13209646

#SPJ1

{{0, 1, 2}, {4, 5, 6}, {8, 3, 6}} are the following initializer lists, which could replace /*missing code*/ so that the code segment works as intended.

What is initializer in programming?

In programming, an initializer is a syntax construct that allows you to set the initial value of a variable at the time of its declaration. Initializers are used to initialize variables of primitive types (such as integers or floating-point numbers) and objects of user-defined types.

The syntax for initialization varies depending on the programming language. In some languages, you can initialize a variable by simply assigning a value to it, like this:

int x = 10;

float y = 3.14;

In other languages, you use special syntax such as curly braces {} or parentheses () to specify an initializer list, like this:

int[] numbers = {1, 2, 3, 4, 5};

std::vector<std::string> names {"Alice", "Bob", "Charlie"};

To learn more about initializer, visit: https://brainly.com/question/25396375

#SPJ1

Important conditions to present online include a clause referring to the management of any dispute to regulate certain offers for products or services and therefore the following contracts.

When a device is on and linked to other things, such as a computer, a network, or a device like a printer, it is said to be online. Online now refers to being hosted in more recent times.

An online course is one that is delivered over the Internet. Courses are often performed using a lms, where students may access their course curriculum, track their academic progress, and interact with their peers and instructors.

To know more about Online visit:

https://brainly.com/question/1395133

#SPJ1

The complete question is-

To control specific offers for goods or services and thus the resulting contracts, important terms to provide online include

a). a detailed history of the particular business.

b). an updated list of the goods or services.

c). a provision relating to the resolution of any dispute.

d). positive reviews from customers or clients.