If we react 10 moles of hydrogen with 6 moles of oxygen. what is the limiting reagent and how much water is produced?

Answer:

Explanation:

Structure of 3-ethyl-5-isobutylnonane

It is given in the following attachment:

to know more about ethyl

https://brainly.in/question/1717348

The organic compound 3-ethyl- 5-isobutylnonane contains 9 carbon atoms in the long chain and one ethyl branch at the third carbon atom and one isobutyl group in the 5th carbon atom as in the image.

Hydrocarbons are organic compounds with carbon -hydrogen bonds. The organic compounds are named based on the rules of IUPAC. The compound gets its basic name from the number of carbon atoms in the longest chain.

If the number of carbons atoms is one, the chain is given its suffix meth, eth for two prop for three and so on. The chain with 9 carbon atoms are named with nonane in the end.

Here, the given compound contains an ethyl group as a branch in third carbon in the chain and an isobutyl group in the 5th position as shown in the image given below:

Find more on hydrocarbons:

https://brainly.com/question/17578846

#SPJ2

This is possible because the volume of water displaced by an object is determined by the volume of the object, not its weight or mass.

The cube of metal I and the cube of another metal both have the same volume, so they would displace the same volume of water. The principle of buoyancy states that the buoyant force on an object is equal to the weight of the fluid that is displaced by the object can be applied in here. Therefore, if two objects have the same volume, they will displace the same amount of fluid and experience the same buoyant force.

Learn more about the principle of buoyancy here: https://brainly.com/question/4421565

#SPJ4

Because it is structured in a repeating pattern, the crystal of strontium chloride (SrCl2) is referred to as having an extended structure.

A group of atoms or molecules that are present in a repeating pattern and are arranged in a specific ratio are said to produce extended structures in crystals. Crystals are composed of clustered together atoms of a single element or, in some cases, molecules.

We can infer that the strontium chloride (SrCl2) crystal is regarded as an extended structure because of its organization in a repeating pattern because of its repeating pattern and constant ratio of strontium chloride (SrCl2).

Learn more about strontium chloride here: https://brainly.com/question/29668810

#SPJ4

To determine the concentration of an unknown solution, the technique that can be used is called titration.

Titration is a qualitative analysis technique which is used to calculate the unknown concentration of a given analyte in a solution.

In this process, a standard solution of known concentration and volume is taken(titrant). This solution is then allowed to react with the analyte until the endpoint attained.

In the first step of this procedure, a small amount of the analyte is added to a conical flask or a beaker, followed by the addition of a small amount of indicator. This is then placed under the burette containing the standard solution or titrant.

Small volumes of titrant are added to the analyte dropwise until a permanent colour change is observed on reaching the end point.

To know more about titration here

https://brainly.in/question/54340574

#SPJ4

A powerful acid is made into a solution by a science instructor so that pupils can use it in the lab. This weakens the concentration since there is less solute per quantity of liquid.

A substance is considered an acid if it produces a sour taste in water solution, turns blue litmus paper red, reacts with the some metals to release hydrogen, reacts chemically bases and form salts, and encourages chemical reaction.

Typically, acids can be categorized into three main groups. Binary acid comes in first, followed by oxyacid and carboxylic acid, respectively. All of the names of binary acids begin with "H-A," which stands for a hydroxyl group to a nonmetal atom.

To know more about acid visit:

https://brainly.com/question/14072179

#SPJ4

Answer:

weaker
decreases

Explanation:

edge 2023

Answer:

Because unlike Earth and other solid objects, the entire Sun doesn't rotate at the same rate. Because the Sun is not solid, but is instead a giant ball of gas and plasma, different parts of the Sun spin at different rates. The interior of the Sun does not spin the same way as does its surface.

Water is absorbed by CaCl2 molecules, resulting in bigger molecules. In order for the solute to dissolve in the solvent, the solute-solute interactions between the solute particles must be disrupted.

An inorganic material is calcium chloride, a salt with the chemical formula CaCl2. It is a white, crystalline substance that is highly water soluble at ambient temperature. It may be created by neutralizing calcium hydroxide with hydrochloric acid. By reducing the freezing point of water, calcium chloride is used to both prevent the production of ice and to remove it. This application makes the maximum use of calcium chloride.

To learn more about CaCl2 molecules refer to:

brainly.com/question/8881373

#SPJ4

Yes, it is the right response. Although the elements are imaginary, they resemble actual elements .Nomenclature is an organism name system used in biological classification.

The Latin words nomen (name) and calare (to call) are the source of the word nomenclature. Both the Latin word nomenclatura and the English word nomenclator, which also denotes a source or broadcaster of names, relate to a list of names.

Nomenclature is an organism name system used in biological classification. Genus & species names, two Latinized nouns drawn from numerous sources, serve as indicators of the species whereby the creature belongs.

To know more about nomenclature visit:

https://brainly.com/question/15324006

#SPJ1

If the temperature increases, then the concentration of sodium hydroxide (NaOH) will decrease because the equilibrium will shift in the backward direction.

Sodium hydroxide is an ionic compound consisting of Na⁺ and OH⁻. It is also called as caustic soda. It is an inorganic compound with chemical formula NaOH.

When NaOH dissolve in water it is exothermic in nature. As the temperature increases, the equilibrium will shift in the backward direction.Therefore,as to nullify the effect of increased temperature. It will decrease the solubility of NaOH in water.

Thus, If the temperature increases, then the concentration of sodium hydroxide (NaOH) will decrease.

To learn more about sodium hydroxide, follow the link;

https://brainly.com/question/29327783

#SPJ1

The grams of potassium chloride (KCI are needed to prepare 0.750 L of a 150 M solution of potassium chloride in water is the

83.81 g.

Given that :

Molarity of the KCl = 1.50 M

Volume of the potassium chloride = 0.750 L

The Molarity expression is given below :

Molarity = moles / volume in L

moles = Molarity × volume

moles = 1.50 × 0.750  

moles = 1.125 mol

molar mass of the KCl = 74.5 g/mol

Mass of the KCl = moles × molar mass

Mass of the KCl = 1.125 × 74.5

                          = 83.81 g

Thus, the mass of KCl is 83.81 g

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

Answer: divide the falling number and then get it

Explanation: find the answer

The final temperature of the mixture can be considered as 73°C.

To calculate the final temperature of the mixture, we need to use the heat capacity and the enthalpy of the melting of water. The heat capacity of water is the amount of heat required to raise 1 gram of water by 1 degree Celsius. Melting enthalpy is the amount of heat required to melt one mole of a solid at its melting point.

First, calculate the total heat absorbed in the process of melting the ice. The heat absorbed by ice is equal to the heat capacity of the ice multiplied by the mass of the ice and the change in temperature.

Qice = (mass of ice) x (heat capacity of ice) x (change in temperature)

Qice = (13.1 g) x (2.03 J/g·°C) x (17.9°C - (-17.9°C))

Qice = 13.1 g x 2.03 J/g·°C x 35.8°C = 4,849.8 J

We can also calculate the total heat absorbed by the water during the increase in temperature. The heat absorbed by the water is equal to the heat capacity of water multiplied by the mass of the water and the change in temperature.

Qwater = (mass of water) x (heat capacity of water) x (change in temperature)

Qwater = (103.5 g) x (4.18 J/g°C) x (73.0°C - 0°C)

Qwater = 103.5 g x 4.18 J/g°C x 73.0°C = 30,529.1 J

The final temperature of the mixture can be found by using the total heat absorbed by the ice and water, and the heat of fusion.

The final temperature of the mixture is approximately equal to the temperature of the water before mixing (73.0°C) because the heat absorbed by the ice during melting is much smaller than the heat absorbed by the water during heating.

Q total = Q ice + Q water + heat of fusion

Q total = 4,849.8 J + 30,529.1 J + 6,02 kJ/mol x (13.1g / 18g/mol)

Now we can solve for the final temperature:

Final temperature= Q total / (mass of mixture *  heat capacity of water)

The final temperature of the mixture can be considered as 73°C.

Learn more about specific heat and enthalpy changes in a system involving phase changes here: https://brainly.com/question/13076928

#SPJ4

Answer:

Yes

Explanation:

Yes, I do think they mean the same thing. Explanation: 150 grams and 150 grams are the same thing and adding 0 to the end of a decimal

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, 150grams and 150.0 grams are the same measurement.

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. 150 grams and 150.0 grams are the same measurement as both have same measurement.

Therefore, 50 grams and 150.0 grams are the same measurement.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ2

Reeta could have made the water which is fit for drinking purposes using the materials available to her.

With the available materials, Reeta would have taken the following steps to purify water.  

Firstly, she can filtered the muddy water with the help of a muslin cloth, which is mainly used for the purification purposes. Now, she has to tie a piece of Alum with the help of a thread and submerge it in water and then leave the water which is undisturbed for some time. After resting, the impurities will finally settle down at the bottom and the water from the top can be drained off. Now she has to boil the discarded water for 10 minutes by covering it with the pan and making it cool down followed by filtering the water. And finally, the water will be purified with filtration that will make it fit for drinking purpose.

To know more about impurities here

https://brainly.com/question/14737604

#SPJ4

If the wight of copper metal is 130.42 then molar mass of cu 63.546 u.

The International Unit System uses the mole (symbol: mol) as the measure of material quantity. How many basic entities of a specific drug are present in an object or sample is determined by the quantity of that material. It is specified that the mole comprises precisely 6.022140761023 elementary entities.

The average atomic mass of the element copper, which appears on the periodic table as 63.55 AMU, can be used to calculate its molar mass. The SI symbol of mole is mol.

To know more about moles visit:

brainly.com/question/26416088

#SPJ1

Materials such as concrete, bricks and tiles absorbs and store more heat as compared to materials such as timber and cloth which have low thermal masses.

Thermal mass in floors is most effective. In most of the climate conditions a concrete slab which is insulated underneath and around the edge and where it is in direct contact with the ground absorbs more energy and thus it is the most effective way to increase thermal mass.

Thermal mass refer to the property of construction materials to absorb, store, and release heat energy.

Water also have high thermal mass.

To know more about thermal mass refer to-

brainly.com/question/19666326#

#SPJ4

The frequency of radiation with a wavelength of 492 nm is

6.09 x 10^14 Hz.

What is the meaning of frequency of radiation of wavelength?

Frequency of radiation of wavelength is a measure of how often a particular wavelength of radiation occurs. It is measured in Hertz (Hz) and is equal to the number of wave cycles per second. Wavelength is the distance from one wave crest to the next, so frequency is related to the speed of the wave. A higher frequency corresponds to a shorter wavelength, and a lower frequency corresponds to a longer wavelength.

λ= 480nm =480×10−9m       [∵1nm=10−9m]

c=3×108m/sec

Frequency, v=λ/c

       =[tex]\frac{3*10^{8}ms^{-1} }{480*10^{-9}m }[/tex]

      = [tex]6.09*10^{14}s^{-1}[/tex]

       =[tex]6.09*10^{14} Hz.[/tex]

Therefore, 6.09 x 10^14 Hz is the answer.

To learn more about  frequency of radiation with wavelength from the link

https://brainly.com/question/22096148

#SPJ1

Answer:

I do k .............................

Answer: d 1.0l

Explanation:

Doses of gamma rays, X-rays of electromagnetic radiation and beta particles are measured with simple piece of equipment.

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic radiation,here:

https://brainly.com/question/10759891

#SPJ1

The balanced equation is, 2C₂H₆ + 7O₂ →  4CO₂ + 6H₂O.

The reaction's balanced equation is as follows.

C₂H₂+O₂ → CO₂+H₂O

Water and carbon dioxide gas are created when dimethyl ether and oxygen combine.

Following is the reaction's balanced chemical equation:

2C₂H₆ + 7O₂ →  4CO₂ + 6H₂O.

Three moles of water and two moles of carbon dioxide gas are produced in this reaction when one mole of dimethyl ether combines with two moles of oxygen gas.

According to the law of conservation of mass, the mass of the reactants and products in a chemical reaction should be equal. As a result, each element's number of atoms stays constant throughout the chemical reaction. As a result, the chemical equation that represents the chemical process needs to be balanced. A chemical equation is considered to be balanced when the sum of the atom counts on the reactants and products sides equals one.

To learn more about balance equation refers to;

brainly.com/question/7223459

#SPJ1

Complete question -

Balance the given equation -

__C2H2 + __0₂ → __CO₂ + __H₂O

Answer:

A measurement may be reported as 18.0 mL instead of 18 mL to indicate that it has been measured with greater precision.

The decimal point in 18.0 mL indicates that the measurement was taken to the tenths place, meaning that the actual measurement is between 17.5 mL and 18.4 mL. On the other hand, 18 mL implies that the measurement is between 17.5 mL and 18.9 mL.

Therefore, the use of the decimal point in this case is a way to indicate that the measurement has a higher degree of precision. It is used as a way to communicate that the measurement was taken with greater accuracy and that the number has been rounded to the nearest tenth.

A measurement may be reported as 18.0 mL instead of 18 mL to indicate that it is an exact or precise measurement, rather than an approximation. In scientific experiments or laboratory work, measurements are often reported with a certain number of significant figures, which reflect the precision of the measurement.

In this case, 18.0 mL has one decimal point and implies that the measurement was made to the nearest 0.1 mL, whereas 18 mL doesn't have a decimal point and implies that the measurement was made to the nearest mL.

Additionally, in some cases, the trailing zero after a decimal point is used to indicate the accuracy of the measurement and to make it clear that it is not a rounded number.

The most efficient set of materials would be 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex]. Option D.

From the balanced equation of the reaction illustrated in the image, the mole ratio of [tex]C_6H_{12}O_6[/tex] to [tex]O_2[/tex] is 1:6. In other words, for every 1 mole of [tex]C_6H_{12}O_6[/tex] that is consumed in the reaction, 6 moles of [tex]O_2[/tex] is required for a complete reaction.

In order for the reaction to remain efficient without any of the reactants remaining after the reaction, the mole ratio of the 2 reactants has to be maintained.

Thus:

In other words, only 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex] will leave no leftovers after the reaction.

More on mole ratios can be found here: https://brainly.com/question/15288923

#SPJ1

Answer b

Explanation:

The molarity when 24 grams of LiOH is added to 200 ml of water is 4.2M.

The moles of solute per liter of solution is measured as molarity. For instance, when table salt is dissolved in water, water serves as both the solution and the solute. Sodium chloride weights 58.44 grammes per mole. One molar solution, or 1M, is created by dissolving 58.44 grammes of sodium chloride in one liter of water.

The term "total moles of a solute contained in a kilogram of a solvent" is used to describe molality. Molal concentration is another name for molality. It is a measurement of a solution's solute concentration.

The molarity of the given LiOH solution is found to be 1.99 mol/L or 1.99M.

Given weight = 20g

molar mass of lithium hydroxide = 7+16+1=24g

volume = 200ml = 0.2l

Number of mole (n) = given weight /molar mass of lithium hydroxide

n = 20/24 =0.84

Molality = Number of mole (n) /volume of solvent

molality = 0.84/0.2

= 4.2M

To learn more about molarity of a solution refers to:

brainly.com/question/30188427

#SPJ4

The correct answer is option d. The common name for (CH3)2CHCH2Cl is Iso-butyl chloride.

Iso-butyl chloride is a chlorinated derivative of isobutane. It is organochlorine compounds.  Isobutyl chloride is made up of compounds of chlorine, carbon, and hydrogen.

Other important details about Iso-butyl chloride is as following-

Formula: C4H9Cl

Boiling point: 69 °C

Molar mass: 92.57 g/mol

Density: 877 mg mL−1

Melting point: −131 °C (−204 °F; 142 K)

Heat capacity (C): 158.6 J K−1 mol−1

Refractive index (nD): 1.398

To know more about Compounds refer to-

brainly.com/question/26487468#

#SPJ4

The forms of heat transfer and examples of them when matched, are:

Conduction:

Convection :

Radiation

There are three main forms of heat transfer:

Conduction: This is the transfer of heat through a solid material. Heat is conducted through the material by the collision of atoms and molecules.  Touch therefore transfers heat.

Convection: This is the transfer of heat by the movement of a fluid or gas. In convection, heat is transferred by the movement of the fluid or gas itself.

Radiation: This is the transfer of heat by electromagnetic waves, such as infrared radiation. Radiation does not require a medium for heat transfer and can occur in a vacuum. The sun's energy reaches the Earth through radiation, and heat from a fire can also be felt by radiation.

Find out more on forms of heat transfer at https://brainly.com/question/27673846

#SPJ1

35.7 x 1atm/760 torr = 0.0470 atm

P(ethene) = P(total) - P(water) = 0.822atm - 0.0470atm = 0.775atm

n= PV/RT = (0.775atm)(0.0854L)/(0.08206L atm mol-1 K-1)(305K) = 0.00264mol.

To learn more about Avogadro’s refer to:

https://brainly.com/question/26931664

#SPJ4

Answer:

A

Explanation:

That one doesn't fall in the category of carbon cycle. It has nothing to do with natural causes since it is a man made thing. Industrial activities is not a natural cause.

4 moles of ammonia molecules can be made when 6 grams of hydrogen gas reacts with excess nitrogen.

[tex]N_{2}[/tex](g) + 3[tex]H_{2}[/tex](g) → [tex]2NH_{3}[/tex](g)

1 mole of [tex]N_{2}[/tex] reacts with 3 moles of [tex]H_{2}[/tex]

Therefore, 6 moles of [tex]N_{2}[/tex] will react with 18 moles of [tex]H_{2}[/tex]

[tex]H_{2}[/tex] + 6 no. of moles. ( Hydrogen is a limiting reagent).

No. of moles of ammonia are formed when 3 moles of [tex]H_{2}[/tex] will react with excess of [tex]N_{2}[/tex] = 2

No. of moles of ammonia are formed when 6 moles of [tex]H_{2}[/tex] will react with excess of [tex]N_{2}[/tex] = 2/3×6 = 4

Therefore, it is a gaseous equation (all the reactants as well as products are gases).

To know more about molecules here

https://brainly.com/question/19922822

#SPJ4