Jakku has half the density of earth and 1/3 the radius. What is the ratio of the acceleration due on gravity on Jakku to that of Earth’s? (Hint: density= p= m/v)

To determine the location of the image and its magnification for an object placed in front of a concave mirror, we can use the mirror equation and magnification formula. Magnification of the image is 2.63 and image will be Virtual and upright. Correct answer is option A

Given that the object distance (do) is 15.5 cm and the focal length (f) of the concave mirror is 23.0 cm, we can find the image distance (di).
1/f = 1/do + 1/di, 1/23 = 1/15.5 + 1/di, Solving for di, we get di = -40.7 cm.

The negative sign indicates that the image is on the opposite side of the mirror, which means it is virtual. Now, we can determine the magnification (M). M = -di/do = -(-40.7)/15.5 = 2.63. A positive magnification value of 2.63 means the image is upright and magnified by a factor of 2.63 times the original object size.

In conclusion, the image formed in this example is 40.7 cm behind the mirror, and it has a magnification of 2.63.  Using the mirror equation, 1/f = 1/do + 1/di, where f is the focal length, do is the distance of the object from the mirror, and di is the distance of the image from the mirror. Therefore, the correct option is (a)  

Know more about magnification here:

https://brainly.com/question/30021841

#SPJ11

The time taken by an object to complete one orbit depends on the mass and the distance from the object it is orbiting.

Generally, planets take a longer time to complete one orbit than stars because they are smaller in mass than stars and orbit farther away from them.

For example, the Earth takes approximately 365.25 days to complete one orbit around the Sun, while the Sun takes approximately 225-250 million years to complete one orbit around the center of the Milky Way galaxy.

The reason for this vast difference in the time taken for orbit is because of the massive difference in size between the Earth and the Sun.

The Sun is so massive that its gravitational force holds all the planets in orbit around it, while the planets are small enough that their gravitational pull does not affect the Sun's orbit around the center of the Milky Way galaxy significantly.

In conclusion, planets take a longer time to complete one orbit around stars because of their smaller size and farther distance from the stars they orbit.

Conversely, stars take much longer to complete one orbit around the center of their respective galaxies because of their much larger mass.

To know more about orbit refer here

https://brainly.com/question/18914648#

#SPJ11

Quantum computing is a field of study and technology that utilizes principles of quantum mechanics to process and store information. It has the potential to solve complex problems more efficiently than classical computers by exploiting quantum phenomena like superposition and entanglement.

Quantum computing harnesses the power of quantum bits, or qubits, which can exist in multiple states simultaneously due to superposition. This allows quantum computers to perform parallel computations and solve problems that would be infeasible for classical computers. Moreover, entanglement enables qubits to be interconnected in such a way that the state of one qubit affects the state of another, even when separated by large distances. This property has promising applications for secure communication and faster algorithms. While quantum computing is still in its early stages, ongoing research and development aim to overcome challenges such as qubit stability and error correction to unlock its full potential for various industries, including cryptography, drug discovery, optimization, and simulations.

learn more about Quantum computing here:

https://brainly.com/question/31616942

#SPJ11

The flow rate through the artery is 9.841 cm³/s and the volume of blood that passes through the artery in a period of 40 s is 393.64 cm³.

The flow rate of a fluid through a vessel is given by the product of the cross-sectional area of the vessel and the fluid velocity. The formula for flow rate is:

Flow rate = Area × Velocity

We can use this formula to calculate the flow rate through the artery:

Area = πr²

= π(8 mm)²

= 200.96 mm²

Velocity = 49 cm/s

Flow rate = Area × Velocity

= 200.96 mm² × 49 cm/s

= 9840.64 mm³/s

= 9.841 cm³/s

Therefore, the flow rate through the artery is 9.841 cm³/s.

To calculate the volume of blood that passes through the artery in a period of 40 s, we can use the formula:

Volume = Flow rate × Time

Volume = 9.841 cm³/s × 40 s

= 393.64 cm³

Therefore, the volume of blood that passes through the artery in a period of 40 s is 393.64 cm³.

To know more about Flow rate refer here :

https://brainly.com/question/31070366

#SPJ11

To answer this question, we need to understand the concepts of angular speed and linear speed. Angular speed is the rate at which an object rotates around its axis,

measured in radians per second (rad/s). Linear speed, on the other hand, is the distance an object travels per unit of time, measured in meters per second (m/s).

In this case, we are given the radius of the Earth as 6,378 km. Using this information, we can calculate the angular speed and linear speed of a point on Earth's surface at latitude 31° N.

(a) To find the angular speed, we need to use the formula:

ω = v/r

where ω is the angular speed, v is the linear speed, and r is the radius of the Earth. We know the radius of the Earth is 6,378 km, so we can convert this to meters by multiplying by 1000:

r = 6,378 km × 1000 m/km = 6,378,000 m

We are also given the angular speed as 0.0000727 rad/s. Plugging these values into the formula, we get:

0.0000727 rad/s = v/6,378,000 m

Solving for v, we get:

v = 0.0000727 rad/s × 6,378,000 m = 460.1 m/s

Therefore, the angular speed of a point on Earth's surface at latitude 31° N is 0.0000727 rad/s.

(b) To find the linear speed, we need to use the formula:

v = ωr

where ω is the angular speed and r is the radius of the Earth. Plugging in the values we know, we get:

v = 0.0000727 rad/s × 6,378,000 m = 460.1 m/s

Therefore, the linear speed of a point on Earth's surface at latitude 31° N is 397.45 m/s.

In summary, the angular speed of a point on Earth's surface at latitude 31° N is 0.0000727 rad/s, and the linear speed is 397.45 m/s.

These calculations show how the rotation of the Earth affects the speed of objects on its surface, and provide important information for understanding and predicting various natural phenomena.

To know more about  linear speed. refer here

https://brainly.com/question/13100116#

#SPJ11

(a) The possible range in the ages of the universe, assuming a constant Hubble constant, is approximately 12.7 to 14.7 billion years.

The Hubble constant represents the rate of expansion of the universe. Assuming it has been constant since the Big Bang, we can use the Hubble constant to estimate the age of the universe through the inverse of Hubble's law: age = 1/H₀, where H₀ is the Hubble constant. Taking the lower and upper bounds of the current estimates (19.9 km/s/Mpc and 23 km/s/Mpc), we convert them to km/s per million light-years (Mpc = 3.26 million light-years). Thus, the age range is approximately 1/(23 × 3.26) to 1/(19.9 × 3.26) billion years, resulting in an age range of around 12.7 to 14.7 billion years.

(b) Considering the estimates from twenty years ago, ranging from 50 to 100 km/s/Mpc, the possible ages of the universe would be approximately 6.5 to 13 billion years.

Similarly to part (a), we can use the inverse of the Hubble constant to estimate the age of the universe. Taking the lower and upper bounds from twenty years ago (50 km/s/Mpc and 100 km/s/Mpc) and converting them to km/s per million light-years, we get a range of 1/(100 × 3.26) to 1/(50 × 3.26) billion years. This yields an age range of approximately 6.5 to 13 billion years.

Considering other lines of evidence, such as measurements of the cosmic microwave background radiation and the abundance of light elements, the age of the universe is estimated to be around 13.8 billion years. This value falls within the range of both the current and the previous estimates of the Hubble constant. Therefore, the evidence supports the age of the universe being around 13.8 billion years, providing some constraints on the possibilities given by different estimates of the Hubble constant.

Learn more about estimates here:

https://brainly.com/question/30876115

#SPJ11

The correct answer is b. Both neural crest cells and neural growth cones are derived from the neural plate and migrate. Neural crest cells are a group of cells that migrate during development and give rise to various cell types including neurons, glial cells, and melanocytes.

On the other hand, neural growth cones are the tips of growing axons that navigate towards their target cells during development. While both follow different guidance cues, they both have lamellipodia, which are extensions used for movement.
Semaphorins, on the other hand, are a family of proteins that are involved in guiding axons and neural crest cells during development. They can either attract or repel these cells depending on the context. Specifically, semaphorin 3A is known to repel neural crest cells, while semaphorin 3F is known to guide axons. In summary, neural crest cells and neural growth cones have commonalities in their origin from the neural plate and migration, but have different functions and guidance cues.
In conclusion, the answer to the question is b, both neural crest cells and neural growth cones are derived from the neural plate and migrate. , neural crest cells and neural growth cones are both important players in the development of the nervous system. While neural crest cells give rise to various cell types, including neurons and glial cells, neural growth cones guide the axons of developing neurons towards their target cells. Both of these cells have lamellipodia, but follow different guidance cues. Semaphorins are proteins that play a role in guiding these cells, and can either attract or repel them depending on the context.

To know more about neural crest cells visit :

https://brainly.com/question/31626804

#SPJ11

An isotope of potassium with the same number of neutrons as argon-40 has 19 protons, 21 neutrons, and 19 electrons. Potassium has an atomic number of 19, meaning it normally has 19 protons and 19 electrons.

However, this isotope has the same number of neutrons as argon-40, which has an atomic number of 18 and a mass number of 40. This means that argon-40 has 18 protons and 22 neutrons. Since the isotope of potassium has the same number of neutrons, it must also have 18 protons, but to maintain a neutral charge, it must also have 19 electrons. Thus, the isotope of potassium with the same number of neutrons as argon-40 has 19 protons, 21 neutrons, and 19 electrons.

learn more about neutrons

https://brainly.com/question/29771588

#SPJ11

The mass of the camera must be 0.6 kg so that its terminal velocity is 50 m/sec.

Sure, here are the equations involved in calculating the mass of the camera:

The drag force on the camera can be calculated using the formula:

[tex]F_d_r_a_g[/tex] = b * v

where b is the windage drag coefficient (given as 1.2 kg/sec) and v is the velocity of the camera.

The force of gravity acting on the camera can be calculated using:

[tex]F_g_r_a_v_i_t_y[/tex] = m * g

where m is the mass of the camera and g is the acceleration due to gravity (approximated as 9.81 m/[tex]s^2[/tex]).

When the camera reaches its terminal velocity, the drag force will be equal and opposite to the force of gravity. Thus, we can set [tex]F_d_r_a_g[/tex] = [tex]F_g_r_a_v_i_t_y[/tex] and solve for m:

b * [tex]v_t_e_r_m_i_n_a_l[/tex] = m * g

where [tex]v_t_e_r_m_i_n_a_l[/tex] is the terminal velocity of the camera (given as 50 m/s). Rearranging this equation, we get:

m = (b * [tex]v_t_e_r_m_i_n_a_l[/tex]) / g

Substituting the given values, we get:

m = (1.2 kg/sec * 50 m/s) / 9.81 m/[tex]s^2[/tex]

m ≈ 0.6 kg

Therefore, the mass of the camera must be 0.6 kg to achieve a terminal velocity of 50 m/s.

Learn more about Drag force

brainly.com/question/12774964

#SPJ11

The man's average velocity is 0.41 m/s, calculated by dividing the total displacement (115 m) by the total time (245 s).

To calculate the average velocity, we need to find the total displacement and divide it by the total time. The man initially runs 180 m north, which we consider as positive displacement. Then he turns and runs 65 m south, which we consider as negative displacement. The total displacement is the sum of these displacements, which is 180 m - 65 m = 115 m. The total time taken is 245 s. Dividing the total displacement (115 m) by the total time (245 s), we get the average velocity of 0.41 m/s. The negative sign indicates that the man's final position is in the opposite direction of his initial position.

learn more about velocity  here:

https://brainly.com/question/15486568

#SPJ11

Use similar triangles to find tree height: (tree height)/(6 m) = (image height)/(10 cm). Calculate image height and find tree height.

To find the height of the tree, we will use the concept of similar triangles.

In a pinhole camera, the image formed on the screen is proportional to the actual object. So, we can set up a proportion:
(tree height) / (distance from tree to pinhole: 6 m) = (image height) / (distance from pinhole to screen: 10 cm)

First, convert 6 meters to centimeters: 6 m * 100 cm/m = 600 cm. Now, our proportion is:
(tree height) / (600 cm) = (image height) / (10 cm)

Cross-multiply and solve for tree height:
(tree height) = (image height) * (600 cm) / (10 cm)

Once you measure the image height on the screen, plug it into the equation to find the height of the tree.

For more such questions on triangles, click on:

https://brainly.com/question/13495142

#SPJ11

The wavelength of the radio wave is approximately 3.14 meters (rounded to two decimal places). This means that the distance between successive crests or troughs of the wave is 3.14 meters.

The speed of light is constant at approximately 3.0 x [tex]10^{8}[/tex] meters per second (m/s). The frequency of the radio wave is 95.6 MHz, which is equivalent to 95,600,000 Hz.

To find the wavelength, we can use the formula: wavelength = speed of light / frequency. Substituting the values we get: wavelength = 3.0 x [tex]10^{8}[/tex] m/s / 95,600,000 Hz

After calculation, the wavelength of the radio wave is approximately 3.14 meters (rounded to two decimal places). This means that the distance between successive crests or troughs of the wave is 3.14 meters.

Understanding the wavelength of radio waves is important in radio broadcasting as it determines the range of the radio signal.

Longer wavelengths allow the radio waves to travel greater distances with less energy loss, making them ideal for long-range broadcasting.

On the other hand, shorter wavelengths are more suitable for local broadcasting as they have a limited range but can carry more information due to their higher frequency.

To know more about radio waves, refer here:

https://brainly.com/question/28874040#

#SPJ11

When a photon interacts with a nucleus or an electron, it can be absorbed by the atom, and its energy is transferred to the atom's electron(s),

Ejected from the atom, or it can undergo pair production. In pair production, the energy of the photon is converted into the rest mass of an electron-positron pair.The minimum energy required for pair production is 2m_ec^2 = 1.022 MeV, where m_e is the mass of the electron and c is the speed of light.In this case, the photon has an energy of 3.64 MeV, which is greater than the minimum energy required for pair production. Therefore, the photon can produce an electron-positron pair.The total energy of the electron-positron pair will be equal to the energy of the photon, which is 3.64 MeV. This energy will be divided between the electron and the positron in some proportion, depending on the specifics of the pair production event.

To know more about proportion visit :

https://brainly.com/question/30657439

#SPJ11

The resistance of a wire can be calculated using the formula:

R = (ρ * L) / A,

where R is the resistance, ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area of the wire.

Given:

ρ (resistivity of aluminum) = 2.65 x 10^(-8) Ωm,

L (length of aluminum wire) = 15 m,

A (cross-sectional area of aluminum wire) = 1.0 mm².

We need to convert the cross-sectional area from mm² to m²:

1 mm² = 1 x 10^(-6) m².

Substituting the given values into the formula, we have:

R = (2.65 x 10^(-8) Ωm * 15 m) / (1 x 10^(-6) m²).

Simplifying the expression:

R = 2.65 x 10^(-8) Ωm * 15 m * 10^6 m².

R = 3.975 Ω.

Therefore, the resistance of 15 m of aluminum wire with a cross-sectional area of 1.0 mm² is approximately 3.975 Ω.

The closest answer choice is B. 0.40 Ω.

To know more about resistance refer here

https://brainly.com/question/32301085#

#SPJ11

i. The efficiency of this engine is approximately 65.6%.

ii. No, we could not have a 100% efficient Carnot engine because that would require a cold reservoir at absolute zero (0 K) which is impossible to reach.

i. To calculate the efficiency of a Carnot engine, use the formula:

Efficiency = 1 - (Tc/Th)

where Tc is the temperature of the cold reservoir (in Kelvin) and Th is the temperature of the hot reservoir (in Kelvin). First, convert the temperatures to Kelvin:

Tc = 17°C + 273.15 = 290.15 K
Th = 570°C + 273.15 = 843.15 K

Now, plug these values into the efficiency formula:

Efficiency = 1 - (290.15/843.15) = 1 - 0.344 ≈ 0.656

The efficiency of this Carnot engine is approximately 65.6%.

ii. A 100% efficient Carnot engine is theoretically impossible, as it would require a cold reservoir at absolute zero (0 K). The Second Law of Thermodynamics states that it's impossible to reach absolute zero; hence, a Carnot engine can never be 100% efficient.

Learn more about Carnot engine here: https://brainly.com/question/28562659

#SPJ11

Answer: 35,000 KM/S moving further away.

The wavelength of the light is 3.75 × 10^−7 m, or 375 nm.The distance between adjacent bright fringes is 1.2 cm.

To solve this problem, we can use the equation for the position of the nth order fringe:

y_n = (n λ L) / d

where y_n is the distance from the center line to the nth order fringe, λ is the wavelength of the light, L is the distance from the slits to the screen, d is the distance between the slits, and n is the order of the fringe.

We are given L = 1.2 m, d = 0.03 mm = 3 × 10^−5 m, n = 2, and y_n = 4.5 cm = 0.045 m for the second order fringe. We can solve for λ:

λ = (y_n d) / (n L) = (0.045 m × 3 × 10^−5 m) / (2 × 1.2 m) = 3.75 × 10^−7 m

So the wavelength of the light is 3.75 × 10^−7 m, or 375 nm.

To find the distance between adjacent bright fringes, we can use the equation:

Δy = λ L / d

where Δy is the distance between adjacent fringes. Plugging in the values, we get:

Δy = (λ L) / d = (3.75 × 10^−7 m × 1.2 m) / (3 × 10^−5 m) = 0.012 m = 1.2 cm

So the distance between adjacent bright fringes is 1.2 cm.

To sketch the light and dark bands, we can use the equation for the intensity of the light at a point on the screen:

I = I_0 cos^2 (πy / λ L)

where I_0 is the intensity at the center line. The intensity is maximum (bright) where the cosine function equals 1, and minimum (dark) where it equals 0. The bright fringes are spaced a distance of Δy apart, and the dark fringes are located halfway between the bright fringes. The intensity graph would look like a series of peaks and troughs with a constant distance of 1.2 cm between them.

For more questions on  intensity:

https://brainly.com/question/4431819

#SPJ11

The wavelength of the light is approximately 5.0 x 10⁻⁷ m (500 nm). The distance between any two adjacent bright fringes is approximately 0.45 cm (4.5 mm).

To calculate the wavelength of the light, we can use the formula for the fringe spacing in a double-slit interference pattern:

y = (mλL) / d

where y is the distance from the center line to the mth order fringe, λ is the wavelength of the light, L is the separation between the screen and the double slit source, d is the distance between the slits, and m is the order of the fringe.

Given that L = 1.2 m, d = 0.03 mm (converted to meters, 0.03 x 10⁻³ m), and y = 4.5 cm (converted to meters, 4.5 x 10⁻² m), and m = 2, we can rearrange the formula to solve for λ:

λ = (yd) / (mL) = (4.5 x 10⁻² m) x (0.03 x 10⁻³ m) / (2 x 1.2 m) ≈ 5.0 x 10⁻⁷ m (500 nm).

The distance between any two adjacent bright fringes can be found using the same formula:

y = (mλL) / d

By substituting the values for m, λ, L, and d, we find:

y = (2 x 5.0 x 10⁻⁷ m x 1.2 m) / (0.03 x 10⁻³ m) ≈ 0.45 cm (4.5 mm).

The sketch provided visually represents the distribution of light and dark bands on the screen, with bright fringes alternating with dark regions. The intensity of light is typically represented by the graph of the intensity profile, showing peaks corresponding to the bright fringes and valleys corresponding to the dark regions.

Therefore, the light has a wavelength of around 500 nm and the distance between neighboring bright fringes is about 4.5 mm.

To know more about wavelength, refer here:

https://brainly.com/question/31143857#

#SPJ4

The focal length of the contacts is effectively zero for the far point and the uncorrected far-point distance is 16.06 cm (or 0.16 m)

The far-point distance is the distance beyond which the person is able to see objects clearly without any optical aid. For a nearsighted person, the far-point distance is moved closer to the eye, and the correction is achieved by using a concave lens with a negative focal length.

The relationship between the focal length (f) of a lens, the object distance (do), and the image distance (di) is given by the lens equation:

1/f = 1/do + 1/di

where the object distance is the distance from the object to the lens, and the image distance is the distance from the lens to the image.

For a far point, the image distance is infinity (di = infinity), and the object distance is the far-point distance (do = 8.5 m). Substituting these values into the lens equation, we get:

1/f = 0 + 1/infinity

1/f = 0

Therefore, the focal length of the contacts is effectively zero for the far point.

To find the uncorrected far-point distance, we can use the thin lens formula, which relates the focal length of a lens to the object distance and the image distance:

1/do + 1/di = 1/f

where f is the focal length of the uncorrected eye lens. Assuming that the corrected eye with the contacts behaves as a thin lens, we can use the focal length of the contacts as the image distance (di = -6.5 cm) and the far-point distance as the object distance (do = 8.5 m):

1/do + 1/di = 1/f

1/8.5 + 1/(-6.5) = 1/f

Solving for f, we get:

f = -16.06 cm

Therefore, the uncorrected far-point distance is 16.06 cm (or 0.16 m) with two significant figures.

To know more about Distance refer here :

https://brainly.com/question/26550516

#SPJ11

The sound level emitted by the vacuum cleaner is 66.53 dB, which is equivalent to the sound level of a normal conversation or a dishwasher.

To calculate the sound level in decibels (dB) from the intensity of a sound wave emitted by a vacuum cleaner, we need to use the following formula:

Sound level (dB) = 10 log (I/I0)

where I is the intensity of the sound wave in watts per square meter (W/m2), and I0 is the reference intensity, which is usually taken to be 1 picowatt per square meter (10^-12 W/m2).

In this case, the intensity of the sound wave emitted by the vacuum cleaner is given as 4.50 µw/m2, which is equivalent to 4.50 x 10^-6 W/m2. Therefore, we can calculate the sound level in dB as:

Sound level (dB) = 10 log (4.50 x 10^-6/10^-12)

Sound level (dB) = 10 log (4.50 x 10^6)

Sound level (dB) = 10 x 6.6532

Sound level (dB) = 66.53 dB

For more such questions on sound level:

https://brainly.com/question/30101270

#SPJ11

The sound level emitted by the vacuum cleaner is 66.53 dB, which is equivalent to the sound level of a normal conversation or a dishwasher.

To calculate the sound level in decibels (dB) from the intensity of a sound wave emitted by a vacuum cleaner, we need to use the following formula:

Sound level (dB) = 10 log (I/I0)

where I is the intensity of the sound wave in watts per square meter (W/m2), and I0 is the reference intensity, which is usually taken to be 1 picowatt per square meter (10^-12 W/m2).

In this case, the intensity of the sound wave emitted by the vacuum cleaner is given as 4.50 µw/m2, which is equivalent to 4.50 x 10^-6 W/m2. Therefore, we can calculate the sound level in dB as:

Sound level (dB) = 10 log (4.50 x 10^-6/10^-12)

Sound level (dB) = 10 log (4.50 x 10^6)

Sound level (dB) = 10 x 6.6532

Sound level (dB) = 66.53 dB

Visit to know more about Sound level:-

brainly.com/question/30101270

#SPJ11

The frequency of the orange light is 4.6 x 10^14 sec^-1. To calculate the frequency, we can use the formula:  frequency = speed of light / wavelength. The speed of light is approximately 3 x 10^8 m/s. However, we need to convert the wavelength from nm to m by multiplying it by 10^-9. So,

frequency = (3 x 10^8 m/s) / (650 x 10^-9 m)
frequency = 4.6 x 10^14 sec^-1

To find the frequency of the orange light with a wavelength of 650 nm, we will use the formula:

Frequency (f) = Speed of Light (c) / Wavelength (λ)

First, we need to convert the given wavelength from nanometers (nm) to meters (m) using the conversion factor 1 nm = 10^-9 m:

650 nm * (10^-9 m/nm) = 6.50 * 10^-7 m

Now, we will use the speed of light (c), which is approximately 3.00 * 10^8 m/s:

f = (3.00 * 10^8 m/s) / (6.50 * 10^-7 m)

After dividing, we get:

f ≈ 4.62 * 10^14 sec^-1

So, the frequency of this particular color of orange light is approximately 4.62 * 10^14 sec^-1.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ11

True. A QRS complex that extends to 15mm high is considered prolonged and can be a sign of left ventricular hypertrophy. However, other factors should also be considered before making a diagnosis, such as the patient's medical history and other test results.

Your question is: True or false, in a patient with a QRS complex that extends to 15mm high, left ventricular hypertrophy (an enlarged left ventricle) is likely indicated.

The answer is True. When a QRS complex extends to 15mm high, it is likely indicating left ventricular hypertrophy, which is an enlarged left ventricle. This is because an increased QRS amplitude is associated with a greater amount of ventricular muscle mass, which is a characteristic of left ventricular hypertrophy.

To know more about QRS complex visit:

https://brainly.com/question/31630927

#SPJ11

The mass of the disk is approximately 1.518 kg. To find the mass of the disk, we can use the formula for rotational kinetic energy.

Rotational kinetic energy (KE) = (1/2) * moment of inertia * (angular speed)²

The moment of inertia for a solid disk can be calculated as:

moment of inertia = (1/2) * mass * radius²

Given:

Rotational kinetic energy (KE) = 2300 ft-lb

Radius (r) = 3.4 ft

Angular speed (ω) = 48.17 rad/sec

Let's convert the rotational kinetic energy from ft-lb to the SI unit, Joules:

1 ft-lb = 1.35582 Joules

Rotational kinetic energy (KE) = 2300 ft-lb * 1.35582 Joules/ft-lb ≈ 3118.8066 Joules

Now, we can rearrange the equation for rotational kinetic energy and solve for the mass:

KE = (1/2) * moment of inertia * (angular speed)²

moment of inertia = (2 * KE) / ((angular speed)²)

moment of inertia = (2 * 3118.8066) / (48.17²)

moment of inertia ≈ 8.339 kg * m² (approximated to three decimal places)

The moment of inertia for a solid disk is also equal to (1/2) * mass * radius², so we can rearrange the equation to solve for the mass:

mass = (2 * moment of inertia) / radius²

mass = (2 * 8.339) / (3.4²)

mass ≈ 1.518 kg (approximated to three decimal places)

Learn more about rotational kinetic energy: https://brainly.com/question/30459585

#SPJ11

The pilot should look to the right side of the aircraft. In aviation, the term "3 o'clock" refers to a clock face analogy where the nose of the aircraft is at noon.

Therefore, when the ATC radar facility advises "TRAFFIC 3 O'CLOCK," it means that the traffic is located on the right side of the aircraft. Additionally, the advisory states that the traffic is "2 miles, westbound," indicating that the traffic is moving in a westward direction from the pilot's perspective. Therefore, the pilot should look to the right side of the aircraft and scan the airspace for traffic, keeping in mind the specified distance and direction. The clock face analogy is a common method used in aviation to describe the position of aircraft or objects relative to the nose of an aircraft. In this analogy, the nose of the aircraft is considered the 12 o'clock position, and the rest of the directions are determined accordingly.

Learn more about  right side of the aircraft here:

https://brainly.com/question/31665496

#SPJ11

The coefficient of restitution (COR) in this scenario is approximately 0.638. If a ball bounces to a height of 1.8 m and the drop height was 9.4 m.

The COR is a measure of the elasticity of a collision and is calculated by taking the square root of the ratio of the rebound height to the drop height.

To calculate the COR, we use the formula:

[tex]COR = \sqrt{(COR = sqrt(h_{re} bound /r_{drop} )}[/tex]

Where:

COR is the coefficient of restitution

h_rebound is the rebound height

h_drop is the drop height potential energy

Plugging in the given values:

COR = √(1.8 / 9.4)

Evaluating the expression, we find that the COR is approximately 0.638. This indicates that the ball has a relatively high level of elasticity, as a higher COR value indicates a more elastic collision where the ball bounces back closer to its original height.

Learn more about potential energy here

https://brainly.com/question/32237966

#SPJ11

b. high speed electrons spiraling around the planet's strong magnetic field.

What is Synchrotron radiation.?

Synchrotron radiation is the emission of electromagnetic radiation, particularly in the form of radio waves, by high-energy charged particles, such as electrons, as they move in a curved path under the influence of a magnetic field. This radiation is often observed in synchrotrons, which are circular particle accelerators used for high-energy physics research.

Synchrotron radiation is produced by high energy charged particles, typically electrons, as they move in a curved path under the influence of a magnetic field. Jupiter has a very strong magnetic field and is surrounded by a radiation belt filled with high-energy electrons, ions, and other charged particles. These charged particles are accelerated along the planet's magnetic field lines and emit synchrotron radiation as they spiral around the magnetic field lines. This synchrotron radiation is observable in the radio frequency range and was first detected from Jupiter in the 1950s.

To know more about Synchrotron radiation  visit:

https://brainly.com/question/9977060

#SPJ4

False. The coefficient of performance (COP) of a refrigerator represents the ratio of the amount of heat removed from the refrigerated space to the amount of work supplied.

It is given by COP = Qc/W, where Qc is the heat removed and W is the work supplied. A higher COP indicates a more efficient refrigerator, as it removes more heat for a given amount of work. Therefore, the COP does not represent the amount of heat removed per unit of work supplied, but rather the efficiency of the refrigerator in removing heat from the refrigerated space. The coefficient of performance (COP) of a refrigerator represents the ratio of the amount of heat removed from the refrigerated space to the amount of work supplied.

learn more about COP here:

https://brainly.com/question/13326702

#SPJ11

The acceleration of the plane must be approximately 0.040 m/s².

To solve this problem, we can use the formula:

a = (v_f^2 - v_i^2) / (2d)

where a is the acceleration, v_f is the final velocity (2.40 × 102 m/s), v_i is the initial velocity (2.00 × 102 m/s), and d is the distance traveled (1.20 km = 1200 m).

Plugging in the values, we get:

a = (2.40 × 10^2 m/s)^2 - (2.00 × 10^2 m/s)^2 / (2 × 1200 m)

a = 24000 m^2/s^2 / 2400 m

a = 10 m/s^2

Therefore, the acceleration of the plane must be 10 m/s^2.
To find the acceleration of the plane, we can use the following equation from classical mechanics:

v^2 = u^2 + 2as

where v is the final velocity (2.40 × 10² m/s), u is the initial velocity (2.00 × 10² m/s), a is the acceleration, and s is the distance (1.20 km = 1200 m). Rearrange the equation for a:

a = (v^2 - u^2) / (2s)

Substitute the values:

a = ((2.40 × 10² m/s)² - (2.00 × 10² m/s)²) / (2 × 1200 m)

a ≈ 0.040 m/s²

To know more about classical mechanics visit:-

https://brainly.com/question/28682404

#SPJ11

False, Gas exchange between the blood and air at the level of the alveoli is referred to as pulmonary gas exchange or pulmonary diffusion.

The statement "Gas exchange between the blood and air at the level of the alveoli is referred to as pulmonary transport" is False.
                                     The correct term for this process is pulmonary gas exchange or external respiration. Pulmonary gas exchange involves the diffusion of oxygen from the air in the alveoli to the blood in the pulmonary capillaries, and the diffusion of carbon dioxide from the blood to the alveolar air.

                                        This process occurs at the level of the alveoli within the lungs. Gas exchange between the blood and air at the level of the alveoli is referred to as pulmonary gas exchange or pulmonary diffusion.

Learn more about pulmonary diffusion

brainly.com/question/25750755

#SPJ11

This case, 80 bytes get allocated.Assuming a 32-bit architecture, the size of a pointer is typically 4 bytes. In the given code snippet, the variable "ptr" is being allocated memory using the "malloc" function. The "malloc" function takes in the number of bytes to be allocated as an argument and returns a pointer to the first byte of the allocated memory block.

In this case, "ptr" is being allocated memory for an array of 20 pointers to integers. Each pointer is of size 4 bytes (assuming a 32-bit architecture), so the total size of memory being allocated is 20 * 4 = 80 bytes.
Therefore, the line "ptr = (int**)malloc(20 * sizeof(int*));" is allocating 80 bytes of memory and assigning the pointer to the first byte of that memory block to the variable "ptr".

When using a 32-bit architecture, the allocation statement `ptr = (int**)malloc(20 * sizeof(int*));` will allocate memory for an array of 20 integer pointers. Since the size of a pointer on a 32-bit architecture is 4 bytes, the total bytes allocated will be:
20 (number of pointers) * 4 (bytes per pointer) = 80 bytes

To know more about variable visit :-

https://brainly.com/question/21442369

#SPJ11

40Hz frequency is heard by a stationary observer located between the train and the bicycle.

Frequency is the measure of how often something occurs in a set of data. It can be measured as the number of occurrences of a particular event within a given time period or the fraction of the time that a certain outcome occurs in all occurrences of a given event. Frequency can be expressed as the number of occurrences in a particular interval or the proportion of occurrence at certain intervals.

Step 1: Determine the frequency of the train. If the train is approaching at 50m/s, then the frequency of the train is: 50m/s × (1s/m) = 50Hz

Step 2: Determine the frequency of the bicycle. If the cyclist is approaching at 10m/s, then the frequency of the bicycle is: 10m/s × (1s/m) = 10Hz

Step 3: Subtract the frequency of the train from the frequency of the bicycle to get the frequency heard by the stationary observer.

Frequency heard by the stationary observer = 50Hz - 10Hz = 40Hz.

To learn more about frequency

https://brainly.com/question/27151918

#SPJ4