The answers would be:
Igneous Rocks - They are made from hot magma.
Sedimentary Rocks - They are made from
weathered pieces of rock.
Metamorphic Rocks - They are rocks, small or large
which reformed due to high temperature.
If you'd like to know more, read on:
Igneous rocks are formed when hot magma is cooled
and then it hardens into a rock. The word igneous
comes from the word, "ignis" which means "of fire.
They can be formed beneath the Earth or on the
surface.
Sedimentary rocks are formed from weathered
pieces of rock. These pieces are called sediments.
They can also be made out of other material. When
these sediments settle, it continues to do so until so
much sediment accumulate and they start to press
down on each other. The sediments then start to go
through compaction and sedimentation which for a
sedimentary rock.
Metamorphic rocks form under heat and pressure.
They are squeezed and shaped and go through
metamorphosis or go through change. A
metamorphic rock can be formed from any other type
of rock as long as it goes through changes due to
intense pressure and/or heat.
you wish to navigate your yacht from europe to the united states. which type of map projection would be most useful?
You wish to navigate your yacht from Europe to the United States, type of map projection would be most useful is Mercator.
A map projection is any of a wide range of transformations used in cartography to represent the curved two-dimensional surface of a globe on a plane. In a map projection, locations' coordinates, which are typically expressed as latitude and longitude, are transformed into coordinates on a plane. Projection is one of the essential components of cartography.
The surface is always distorted in some way and to some extent when a sphere is projected on a plane. Depending on the purpose of the map, some distortions are acceptable and others are not; Consequently, various map projections exist to preserve some of the sphere-like body's properties at the expense of others. The investigation of guide projections is principally about the portrayal of their twists. There is no limit to the number of map projections that can be made. All the more by and large, projections are viewed as in a few fields of unadulterated science, including differential calculation, projective math, and manifolds. However, a cartographic projection is the focus of the term "map projection."
Learn more about map projection:
https://brainly.com/question/28765484
#SPJ4
radiocarbon dating is accurate up to 75000 years why would radio potassium be more accurate for a longer date rangfe
Radio potassium dating is more accurate than radiocarbon dating because radio potassium uses the decay of potassium-40 to argon-40, which has a much longer half-life of around 1.25 billion years than radioactive isotopes of carbon.
Radiocarbon dating is accurate up to 75000 years because it measures the decay of the isotope carbon-14, which has a half-life of 5730 years. After that period, the amount of carbon-14 remaining in the sample becomes too small to measure accurately. Radio potassium dating, on the other hand, is used to determine the age of rocks and minerals that are millions or even billions of years old. This method is based on the decay of potassium-40 to argon-40, a process that has a much longer half-life than carbon-14 decay.
This makes it more accurate for dating rocks and minerals that are millions or billions of years old. The longer half-life of potassium-40 allows for more accurate measurement of decay over longer periods, resulting in a more precise date estimate. In summary, while radiocarbon dating is accurate up to 75000 years, radio potassium dating is more accurate for longer date ranges due to the longer half-life of potassium-40.
Learn more about Radiocarbon Dating: https://brainly.com/question/11397015
#SPJ11
Dipping sedimentary rock layers include a layer of basalt containing xenoliths of the overlying sedimentary rock. Which of the following statements must be true?Choose one:A. The basalt is older than the sedimentary rock layers above it.B. The sedimentary layers were deposited on a basaltic lava flow.C. The sedimentary layers were deposited at an angle, creating the "dip" of the layers.D. The basalt is a sill intruded into older sedimentary rock.
It is true that the basalt is a sill intruded into older sedimentary rock.
Among the given options, statement D must be true based on the provided information. A sill refers to a horizontal intrusion of magma that solidifies between preexisting rock layers. In this case, the basalt layer containing xenoliths (fragments of the overlying sedimentary rock) is a result of magma intruding into older sedimentary rock layers.
The xenoliths are pieces of the surrounding sedimentary rock that were engulfed and incorporated within the basalt as it solidified. This scenario suggests that the basalt is younger than the sedimentary rock layers it intruded into, supporting the notion that it is a sill.
The relative ages and deposition processes of the sedimentary layers are not indicated, and there is no mention of the sedimentary layers being deposited at an angle. Therefore, statement D is the most reasonable and supported conclusion.
LEARN MORE ABOUT sedimentary rock here: brainly.com/question/29771190
#SPJ11
CFCs reduced ozone thickness found in the atmospheric layer.
a. Mesosphere
b. All of these?
C.Stratosphere
d. Troposhere
e.Thermosphere
Answer:
CFCs (chlorofluorocarbons) are known to reduce the thickness of the ozone layer in the stratosphere. Therefore, the correct answer is c. Stratosphere.
cratering is common on all of the inner solar system bodies except
Cratering is common on all inner solar system bodies except Venus. Cratering refers to the formation of impact craters on celestial bodies, caused by the collision of asteroids, comets, or meteoroids with the surface.
While cratering is a prevalent process on many inner solar system bodies such as the Moon, Mercury, Mars, and Earth, it is relatively uncommon on Venus.Venus has a unique surface geology characterized by extensive volcanic activity and resurfacing processes. The planet's thick atmosphere, composed mainly of carbon dioxide, creates a strong greenhouse effect, resulting in extremely high surface temperatures and pressures. These conditions contribute to a dynamic geologic activity that continuously erases or masks the impact craters on Venus.
The resurfacing processes on Venus, such as volcanic activity and tectonic movement, are believed to be responsible for the lack of recognizable impact craters. The planet's volcanic activity is thought to be so extensive that it frequently covers or fills in craters with fresh lava flows. This volcanic resurfacing effectively obscures or destroys the original impact features.
In addition to volcanic activity, Venus also experiences intense tectonic activity, including the formation of mountain belts and rift zones. These processes can cause the deformation and folding of the planet's crust, further altering or erasing the features of impact craters.
To learn more about volcanic activity, click here: brainly.com/question/30512167
#SPJ11
ephemeral streams consist fo a seres of intertwined channels that are overloaded with sediemnt. TRUE/FALSE
Ephemeral streams consist fo a seres of intertwined channels that are overloaded with sediemnt is false.
Ephemeral streamsEphemeral streams are temporary watercourses that flow infrequently, usually during and immediately after rainfall events. They are not typically overloaded with sediment or composed of a series of intertwined channels.
Ephemeral streams are characterized by their intermittent nature, with periods of flow followed by dry spells. While they may carry sediment during episodes of flow, sediment load and channel complexity are not defining features of ephemeral streams.
Instead, they are transient waterways that reflect the seasonal or episodic nature of water availability in arid and semi-arid regions.
Therefore, the correct answer is false.
Learn more about Ephemeral streams: brainly.com/question/11355463
#SPJ11
Assuming the medium fertility variant, which group of countries will have a decrease in population by 2100, compared to 2015 levels? Choose all that apply.1. Low-income countries2. Lower-middle-income countries3. Upper-middle-income countries4. None of the groups of countries will decrease.
4. None of the groups of countries will decrease.
According to the 2019 World Population Prospects report from the UN, all groupings of nations will see an increase in population by 2100 compared to 2015 levels, assuming the medium fertility variation.
In fact, the analysis predicts that the world's population will keep growing, reaching an estimated 10.9 billion people by the year 2100, with sub-Saharan Africa experiencing the highest rise. However, due to elements like low fertility rates, ageing populations, and emigration, some nations within each income group may experience population decline.
To know more about population growth :
https://brainly.com/question/18415071
#SPJ4
explain briefly why little farming activities occur on cuestas
The steep slope and thin topsoil on cuestas make it difficult to cultivate crops of such farming activities and manage soil erosion.
Cuestas are lengthened, thin edges with a lofty incline on one side and a delicate slant on the other. They are commonly shaped by differential disintegration of exchanging layers of hard and delicate stone.
Minimal cultivating exercises happen on cuestas on the grounds that the lofty slant on one side makes it challenging to develop crops and oversee soil disintegration. Also, the dirt on cuestas is generally dainty and less rich contrasted with the dirt in nearby valleys or flatlands.
This is on the grounds that the lofty incline takes into consideration fast seepage of water and supplements, leaving the dirt with minimal natural matter and supplements important for plant development.
Thus, cuestas are frequently utilized for brushing or left lacking, while at the same time cultivating exercises are gathered in the contiguous valleys or flatlands where soil conditions are better for agribusiness.
To learn more about farming, refer:
https://brainly.com/question/28617163
#SPJ1
The complete question is:
What are the reasons for little farming activities on cuestas, and how do the steep slope and thin topsoil affect the cultivation of crops on these elongated ridges?
native americans produced petroglyphs by etching into ________.
Native Americans produced petroglyphs by etching into rock surfaces.
Petroglyphs are rock carvings or engravings made by Native Americans and other indigenous cultures. They were created by etching or carving into the surfaces of rocks, typically using stone tools or other sharp objects. Petroglyphs can be found on various types of rock, including cliffs, boulders, and cave walls.
The etchings often depict various symbols, animals, human figures, and geometric patterns that hold cultural, spiritual, or historical significance. Petroglyphs served as a means of communication, storytelling, and recording important cultural events and traditions for Native American communities.
They are valuable archaeological and cultural artifacts that provide insights into the rich history and artistic expressions of indigenous peoples.
To learn more about storytelling click here: brainly.com/question/29810192
#SPJ11
which group of teenagers in the u.s. has shown the steepest decline in thenumber of teenage births in the past decade
In the past decade, the steepest decline in the number of teenage births in the United States has been observed among Hispanic and African American teenagers. These two groups have experienced significant progress in reducing teenage birth rates, contributing to the overall decline in the country.
Hispanic and African American teenagers have historically had higher rates of teenage pregnancy and birth compared to other racial and ethnic groups in the United States. However, efforts focused on education, access to contraception, and comprehensive sex education have played a crucial role in addressing this issue.
Numerous factors have contributed to the decline in teenage births among Hispanic and African American teenagers. These include increased awareness about reproductive health, improved access to contraception methods, better sex education programs in schools, and efforts to reduce disparities in healthcare services. Additionally, community-based initiatives, support networks, and campaigns aimed at empowering young individuals and providing them with the necessary resources have also played a role in reducing teenage birth rates.
The decline in teenage births among Hispanic and African American teenagers is a positive trend, as it signifies progress in promoting reproductive health and reducing the challenges associated with teenage pregnancy. It reflects the effectiveness of targeted interventions and the dedication of various stakeholders in addressing this issue and supporting young individuals in making informed choices regarding their sexual and reproductive health.
To learn more about teenage births click here
brainly.com/question/29548431
#SPJ11
deforestation oftentimes leads to ____ in soil nutrient loss, _____ in food quality, and ____ in susceptibility to human disease.
Deforestation oftentimes leads to an increase in soil nutrient loss, a decrease in food quality, and an increase in susceptibility to human disease.
Increase in soil nutrient loss: Forests play a vital role in maintaining healthy soil by recycling nutrients through decomposition and nutrient cycling processes. When forests are cleared through deforestation, the organic matter in the soil is rapidly depleted, leading to increased erosion and nutrient leaching.
The loss of vegetation cover also reduces the input of organic material and nutrients into the soil, resulting in decreased soil fertility and nutrient availability.
Decrease in food quality: Deforestation can have adverse effects on food quality. Forests provide a diverse range of wild foods, including fruits, nuts, and game animals, which contribute to local diets and livelihoods. When forests are cleared, this natural food source is diminished, leading to a reduction in dietary diversity and potential nutrient deficiencies.
Learn more about deforestation here:
https://brainly.com/question/29585797
#SPJ11
Earthquakes can occur at depths of as great as 650 km. Earthquakes this deep are associated with: A.Extension along divergent boundaries 12. B. Upwelling of magma beneath hotspots C. Shear stress along major transform faults D.Subduction of cold, brittle oceanic lithosphere
Earthquakes can indeed occur at depths of as great as 650 km. Among the given options, earthquakes at such depths are associated with: Subduction of cold, brittle oceanic lithosphere. Option D is the correct answer
These deep earthquakes are generally observed in subduction zones where one tectonic plate slides under another, causing the subducted plate to sink into the Earth's mantle. As the cold, brittle oceanic lithosphere is forced downward, it experiences increasing temperature and pressure. The resulting stress and deformation within the subducted plate can cause earthquakes to occur at great depths, also known as deep-focus earthquakes.
Therefore the correct answer is option D
For more question on lithosphere
https://brainly.com/question/628108
#SPJ11
Earthquakes that occur at depths of up to 650 km are primarily associated with subduction of cold, brittle oceanic lithosphere. This is because as the oceanic plate is pushed beneath the continental plate, it undergoes intense pressure and friction, causing it to fracture and release built-up energy in the form of seismic waves.
Earthquakes can also occur due to shear stress along major transform faults, where two tectonic plates slide past each other horizontally. However, these earthquakes are typically shallower in depth. Finally, while upwelling of magma beneath hotspots can cause volcanic activity, it is not typically associated with earthquakes at depths of 650 km or greater. Earthquakes that occur at depths as great as 650 km are associated with: D. Subduction of cold, brittle oceanic lithosphere. At subduction zones, one tectonic plate is pushed beneath another, causing the colder and more brittle oceanic lithosphere to be forced into the Earth's mantle. As it descends, it is subjected to increasing pressure and temperature, which can cause the release of stored energy in the form of earthquakes. These earthquakes can occur at various depths, including as deep as 650 km.
Learn more about subduction zones here: brainly.com/question/13788626
#SPJ11
TRUE OR FALSE the fault scarp cutting quaternary glacial moraine is evidence that the teton fault is recently active.
True. The fault scarp cutting through a quaternary glacial moraine provides evidence that the Teton Fault has been active recently.
The presence of a fault scarp cutting through a quaternary glacial moraine suggests that the Teton Fault has experienced recent activity. A fault scarp is a steep slope or cliff that forms when one side of a fault line moves vertically in relation to the other side. In this case, the fault scarp intersects the quaternary glacial moraine, which is a deposit of glacial debris from the Pleistocene epoch. Since glacial moraines are relatively young in geological terms, their interaction with a fault scarp indicates recent movement along the fault.
The presence of a fault scarp is a clear indicator of tectonic activity, as it demonstrates the displacement and deformation of the Earth's crust. The cutting of a fault scarp through a quaternary glacial moraine provides a direct record of the fault's recent activity. By analyzing the morphology and age of the fault scarp, geologists can estimate the timing and magnitude of the fault movement, providing valuable insights into the seismic hazard potential of the Teton Fault. Therefore, the fault scarp's presence cutting through a quaternary glacial moraine is a strong piece of evidence supporting the recent activity of the Teton Fault.
To learn more about tectonic activity click here:
brainly.com/question/1129241
#SPJ11
1. what is the main difference between the thermo-dynamical pressure and the electron-degeneracy pressure?
The main difference between thermo-dynamical pressure and electron-degeneracy pressure lies in their origin. Thermo-dynamical pressure is a result of the thermal energy and collisions between particles, while electron-degeneracy pressure arises due to the quantum mechanical properties of electrons in a dense system.
Thermo-dynamical pressure is the pressure that arises due to the motion of particles in a system. It is directly proportional to the temperature and number of particles present in the system. This pressure is significant in systems where the temperature is high, such as in stars, where nuclear reactions generate high temperatures and pressures.
On the other hand, electron-degeneracy pressure is the pressure exerted by the electrons in a system, due to their quantum mechanical properties. In a dense system, such as in a white dwarf or a neutron star, electrons are packed closely together, and their wave functions overlap. This leads to the exclusion principle, which states that no two electrons can occupy the same quantum state. Hence, the electrons in such a system become degenerate, and exert a pressure that resists further compression.
In summary, thermo-dynamical pressure arises due to thermal motion, while electron-degeneracy pressure arises due to quantum mechanical properties of electrons in dense systems. Thermo-dynamical pressure is significant at high temperatures, while electron-degeneracy pressure is significant in compact objects such as white dwarfs and neutron stars.
Know more about thermo-dynamical pressure here:
https://brainly.com/question/17509867
#SPJ11
List the major landform s
Landforms are natural features that make up the Earth's surface and are the result of various geological processes over millions of years. These formations can be found on both continental and oceanic surfaces. Here are some of the major landforms: Mountains, Plateaus, Plains,Valleys, Deserts, Islands.
Mountains: Towering formations that rise above the surrounding land, mountains are characterized by steep slopes and high peaks. Examples include the Himalayas, the Andes, and the Rockies.
Plateaus: Flat, elevated areas that are higher than the surrounding land. Plateaus can be formed by volcanic activity, erosion, or tectonic forces. The Colorado Plateau in the United States and the Deccan Plateau in India are notable examples.
Plains: Large, flat areas with low elevation. Plains are often formed by the deposition of sediment over time and are typically found near coastlines or river valleys. The Great Plains in North America and the Indo-Gangetic Plain in South Asia are prominent examples.
Valleys: Low-lying areas between mountains or hills, usually carved out by rivers or glaciers. Valleys can range from narrow and steep to wide and flat. The Grand Canyon in the United States and the Nile Valley in Egypt are well-known examples.
Deserts: Dry, arid regions with little rainfall and sparse vegetation. Deserts can be sandy, rocky, or a combination of both. The Sahara Desert in Africa and the Mojave Desert in the United States are iconic examples.
Islands: Land masses surrounded by water. Islands can be formed through volcanic activity, coral reefs, or as part of continental land that has been separated by rising sea levels. Examples include Hawaii, the Maldives, and New Zealand.
These are just a few examples of the major landforms found on Earth. Each landform has its own unique characteristics and plays a crucial role in shaping the planet's diverse landscapes.
For more question on landforms
https://brainly.com/question/30354585
#SPJ11
in the survey feedback process process analysis involves developing plans for improvement
In the survey feedback process, process analysis involves developing plans for improvement.
Process analysis is an important step in the survey feedback process. It involves examining the various processes and procedures within an organization or system that are related to the survey results. The purpose of process analysis is to identify areas for improvement and develop plans to address them. This can include analyzing the data collected from the survey, identifying patterns or trends, and pinpointing areas where changes or adjustments are needed. By conducting a thorough process analysis, organizations can gain insights into their operations and make informed decisions to enhance performance, productivity, and overall effectiveness. The goal is to identify opportunities for improvement and implement strategies or interventions to address any identified gaps or weaknesses. Process analysis plays a crucial role in the survey feedback process as it helps organizations take proactive measures to optimize their processes and drive positive change.
To learn more about Feedback, brainly.com/question/32133491
#SPJ11
Which one of the following statements is NOT true about obsidian? A. Obsidian is a type of igneous rock. B. Obsidian, like all glasses, is an amorphous solid, not a highly viscous liquid. C. Obsidian is natural (as opposed to artificial). D. Obsidian is solidified lava. E. Obsidian is made of atoms. F. Obsidian is made of minerals.
The statement that is NOT true about obsidian is f). Obsidian is made of minerals.
ObsidianObsidian is a type of igneous rock formed from volcanic lava that has rapidly cooled. It is primarily composed of silica-rich glass, making it an amorphous solid rather than a crystalline mineral.
Therefore, obsidian does not consist of minerals, which are naturally occurring inorganic solids with a specific crystal structure. Instead, it is a natural, amorphous substance that lacks the crystalline structure characteristic of minerals.
Therefore, the correct answer is f). Obsidian is made of minerals.
Learn more about Obsidian : brainly.com/question/30479219
#SPJ11
a locked section of fault is often identified by the existence of __________ there.
Answer: A locked section of fault is often identified by the existence of seismic gaps there.
A fault is a break or fracture in the Earth's crust where two blocks of rock move past each other. A locked section of a fault is a part of the fault that has not experienced any significant movement or earthquake activity in a while, leading to the accumulation of strain energy in the rocks on either side of the fault.
Seismic gaps are sections of a fault that have not ruptured in a significant earthquake over a certain period of time, usually over decades or longer. The existence of a seismic gap indicates that there is a buildup of strain energy in the rocks on either side of the fault, and that a large earthquake is likely to occur in the future to release this energy.
Geologists and seismologists use seismic gap analysis to identify areas that are at high risk for earthquakes. By monitoring seismic activity and the buildup of strain energy in the rocks, they can make predictions about when and where earthquakes are likely to occur. This information is crucial for disaster preparedness and risk management, as it can help authorities to plan for and mitigate the potential damage caused by earthquakes.
A locked section of a fault is often identified by the existence of seismic gaps or regions of low seismic activity.
Seismic activity refers to the occurrence of earthquakes or other vibrations in the Earth's crust. In a locked section of a fault, the two sides of the fault are stuck together and unable to move relative to each other,resulting in a buildup of strain energy that can eventually lead to a major earthquake.
When a fault has not experienced significant seismic activity for an extended period of time, it is considered to be "locked," meaning that it is under significant strain and has the potential to produce a large earthquake.
Scientists can identify these locked sections of faults by monitoring seismic activity in the region over time. If the region shows a pattern of low or no seismic activity, it suggests that the fault is locked and that a large earthquake may be imminent.
The identification of locked sections of faults is an important tool for assessing earthquake hazard and risk in a region.
By understanding which faults are locked and where they are located, scientists can better predict the likelihood and magnitude of future earthquakes, which can inform emergency planning and other mitigation measures.
To know more about locked section refer here
https://brainly.com/question/28372605#
#SPJ11
which of the four forces keeps you from sinking to the center of earth
The electromagnetic force prevents you from sinking through solid matter, it doesn't counteract gravity in all situations.
What force prevents sinking to the center of the Earth?
The force that keeps you from sinking to the center of the Earth is the electromagnetic force.
The electromagnetic force is one of the four fundamental forces of nature, along with gravity, weak nuclear force, and strong nuclear force. In everyday life, the electromagnetic force is responsible for interactions between charged particles and is primarily associated with electricity and magnetism.
In the context of not sinking to the center of the Earth, the electromagnetic force comes into play at the atomic and molecular level. When you stand on a solid surface, such as the ground, the atoms and molecules in your body interact with the atoms and molecules in the ground.
The electromagnetic force between the negatively charged electrons and the positively charged atomic nuclei generates a repulsive force that prevents you from passing through the solid matter.
This repulsive force arises from the electromagnetic interaction between the negatively charged electron clouds surrounding atoms.
As you get closer to the surface of the Earth, the repulsive force between the electron clouds of the atoms in your body and the electron clouds of the atoms in the ground becomes stronger, counteracting the force of gravity pulling you downward.
This balance between the electromagnetic force and gravity allows you to remain on the Earth's surface rather than sinking to its center.
For example, if you were to jump off a high platform or fall freely, the force of gravity would cause you to accelerate towards the center of the Earth.
Learn more about electromagnetic force
brainly.com/question/13967686
#SPJ11
In Iceland farmers sometimes put soap in the great Geysir to induce an eruption Why? The soap contains the eruptions and makes it safer for tourists that are prone to get to close and fall in The soap breaks the surface tension of the water
They think tourists like to see a more frothy eruption They like to mess with the scientists that study geysir eruptions
In Iceland, some farmers may put soap in the Great Geysir to induce an eruption. This is done for safety reasons, as the soap helps to contain the eruption and prevent tourists from getting too close and falling in.
Great GeysirIn Iceland, some farmers may add soap to the Great Geysir to induce an eruption, primarily for safety reasons. The soap serves the purpose of containing the eruption and ensuring that tourists maintain a safe distance, reducing the risk of accidents.
By breaking the surface tension of the water, the soap helps to regulate and control the eruption, making it less hazardous. It is important to note that the practice of using soap is not intended to create a more visually appealing or frothy eruption for tourists, nor is it meant to disrupt scientific studies on geysir eruptions.
Its main objective is to prioritize safety around the geysir site.
Learn more about Great Geysir: brainly.com/question/30205816
#SPJ11
Which of the following statements about modeled projections of future climate change is FALSE?
Even if emissions are dramatically curtailed, some aspects of the climate are expected to continue changing over the next century.
Future warming of Earth's surface is expected to be more pronounced over land than over sea/oceans.
Nearly all the variation in projections of future climate change comes from uncertainty about how to model climate.
Future warming is expected to be more pronounced in the Arctic than in the tropics (near the Equator).
Nearly all the variation in projections of future climate change comes from uncertainty about how to model climate. (False)
Which statement about modeled projections of future climate change is false?The false statement among the options provided is:
Nearly all the variation in projections of future climate change comes from uncertainty about how to model climate.
Explanation:
While there is some uncertainty associated with climate models and their projections, it is incorrect to claim that nearly all the variation in projections of future climate change comes from uncertainty about how to model climate.
Climate models are complex tools that incorporate a wide range of factors, including greenhouse gas emissions, atmospheric dynamics, ocean circulation, land surface processes, and more.
The uncertainties in future climate projections arise from multiple sources, such as uncertainties in future emissions scenarios, natural climate variability, feedback mechanisms, and the representation of certain processes in the models.
The other three statements are true:
Even if emissions are dramatically curtailed, some aspects of the climate are expected to continue changing over the next century. This is because the Earth's climate system has a certain inertia, meaning that even with significant emission reductions, the effects of past emissions and the slow response of various components of the climate system can lead to continued climate changes. Future warming of Earth's surface is expected to be more pronounced over land than over sea/oceans. Land surfaces generally warm and cool more quickly than oceans due to differences in heat capacity and the presence of water. Therefore, the warming is projected to be more prominent over land areas compared to the oceans.Future warming is expected to be more pronounced in the Arctic than in the tropics (near the Equator). This is due to the phenomenon known as Arctic amplification, where the polar regions experience greater warming compared to other parts of the globe. Feedback mechanisms, such as the loss of reflective sea ice, contribute to the enhanced warming in the Arctic.It's important to note that climate projections and their associated uncertainties are an active area of scientific research, and ongoing efforts are made to improve the models and reduce uncertainties to provide more accurate predictions of future climate change.
Learn more about climate
brainly.com/question/31966219
#SPJ11
describe how the coriolis force results from the conservation of angular momentum and describe what effect that has on the surface of the earth. (
The Coriolis force is a result of the conservation of angular momentum.
As the earth rotates, different points on the surface move at different speeds depending on their distance from the axis of rotation. This causes a change in angular momentum, which must be conserved. The Coriolis force acts to compensate for this change by deflecting moving objects to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.
The Coriolis force has a significant effect on the surface of the earth. It causes objects that are moving across the earth's surface to deviate from their intended path, making it difficult to predict the movement of objects like airplanes, missiles, and ocean currents. The Coriolis force also causes the rotation of hurricanes and typhoons, and it plays a role in the circulation patterns of the earth's atmosphere and oceans. Overall, the Coriolis force is an important factor that affects many natural phenomena on the surface of the earth.
know more about Coriolis force: brainly.com/question/17968560
#SPJ11
the other is white. That one is called There are several types of rocks that form in geothermal areas. One is yellow in color and is called Exact names only and check your spelling
There are several types of rocks that form in geothermal areas. One is yellow in color and is called sulfur, the other is white and is called silica.
The yellow rock you mentioned could potentially be sulfur, which is a common mineral found in geothermal areas and is often a bright yellow color. Sulfur can form in a variety of ways, but in geothermal areas it often precipitates out of hot springs and fumaroles as the water cools and the sulfur solidifies.
As for the white rock you mentioned, there are a few possibilities depending on the specific location. In some cases, it could be a type of volcanic rock such as rhyolite or dacite, which can have a light or white coloration.
These types of rocks are often associated with volcanic activity and can form from magma that cools and solidifies near the Earth's surface.
Another possibility for the white rock could be a type of silica or siliceous mineral such as chalcedony or opal. These minerals can form in geothermal areas where hot water reacts with silica-rich rocks or sediments to create layers of silica deposits.
These deposits can sometimes be white or light-colored depending on the specific mineralogy.
Of course, there are many other types of rocks and minerals that can form in geothermal areas, so these are just a few possibilities based on the information provided. I hope this helps answer your question!
For more questions on rocks visit:
https://brainly.com/question/26046551
#SPJ11
In geothermal areas, the rock which is yellow in colour is called the "sulfur" shake. It is often related to volcanic movement.
Why do rocks that are formed in geothermal areas have different shapes and colours?In geothermal ranges, different sorts of rocks can be shaped due to the strong warm and action.
One case is the "sulfur" shake, which is yellow in color and frequently related to volcanic movement.
Be that as it may, the precise title of the white shake that shapes in geothermal regions is "silica" shake, commonly known as "siliceous sinter" or "geyserite."
Silica shake is shaped from the testimony of silica minerals, regularly showing up as white or pale-colored stores close to hot springs or fountains.
These rocks can show complicated and fragile formations due to the precipitation of broken-down silica within the geothermal water.
Learn more about rocks here:
https://brainly.com/question/26046551
#SPJ4
The complete question:
What are the sorts of rocks that frame in geothermal regions and what is the precise title of the white shake?
using complete sentences, compare the burgess and hoyt models of city growth.
The Burgess and Hoyt models are both theories that explain the spatial growth and development of cities. The Burgess model describes a concentric zone pattern, while the Hoyt model proposes a sector pattern.
The Burgess model, also known as the concentric zone model, was developed by sociologist Ernest Burgess in 1925. It suggests that cities grow outward from a central business district (CBD) in a series of concentric rings. The model identifies five zones: the CBD, a transitional zone of industry and low-income housing, a zone of working-class residential areas, a zone of better residences, and finally, a commuter zone of suburban housing. This model assumes that social and economic factors are the primary drivers of urban growth.
In contrast, the Hoyt model, developed by economist Homer Hoyt in 1939, proposes a sector pattern of urban growth. It suggests that cities expand along transportation corridors or sectors rather than concentrically.
Learn more about zone here:
https://brainly.com/question/1350513
#SPJ11
what is the name of the "supercontinent" that once covered nearly one-third of the earth's surface
The name of the "supercontinent" that once covered nearly one-third of the earth's surface is Pangaea. It is believed that around 300 million years ago, all of the Earth's continents were connected in a single landmass known as Pangaea.
Over time, the tectonic plates started to move, and the continents started to drift apart from each other, eventually forming the land masses we know today. The theory of continental drift was first proposed by Alfred Wegener in 1912, who noticed that the coastlines of Africa and South America seemed to fit together like puzzle pieces.
Pangaea was surrounded by a vast ocean known as Panthalassa, which covered the rest of the Earth's surface. The breakup of Pangaea led to the formation of the Atlantic Ocean and other major features of the Earth's surface we see today. The concept of Pangaea helps us understand the history of the Earth's continents and how they have evolved over millions of years.
You can learn more about the supercontinent at: brainly.com/question/30467052
#SPJ11
this state forest is named for 3 men: hubert bowers, a. spates brady, and herman guy kump. true or false
This state forest is named for 3 men: hubert bowers, a. spates brady, and herman guy kump is true.
The state forest you mentioned is named in honor of three individuals: Hubert Bowers, A. Spates Brady, and Herman Guy Kump. While the specific reasons for their recognition may require further context, it is likely that these men played crucial roles in the establishment or development of the forest.
Their contributions, whether through conservation efforts, advocacy, or leadership, merited the naming of the forest in their honor. While their specific achievements may vary, their collective dedication to the preservation and enhancement of the natural environment is likely reflected in the name bestowed upon the state forest.
Therefore, the correct answer is true.
Learn more about forest : brainly.com/question/19672174
#SPJ11
Current climate change trends show all of the following EXCEPT increased land temperatures increased land ice increased sea temperatures increased CO2 in the atmosphere sea level rise
Current climate change trends show all of the following except increased land ice. The other trends include increased land temperatures, increased sea temperatures, increased CO2 in the atmosphere, and sea level rise.
Current climateCurrent climate change trends show increased land temperatures, increased sea temperatures, increased CO2 in the atmosphere, and sea level rise.
However, the statement mentions "increased land ice" as an exception. It is important to note that overall, land ice is melting at an accelerated rate due to global warming, leading to declining ice masses in glaciers and ice sheets.
This melting contributes to rising sea levels. Therefore, increased land ice is not consistent with the observed trends of climate change.
Learn more about Current climate: brainly.com/question/1789619
#SPJ11
what landform and/or vegetation pattern dominates in australia? deserts mountains plains forests wetlands
Deserts and plains dominate the landform in Australia.
Australia is known for its vast arid regions, making deserts and plains the predominant landforms. The continent is home to expansive desert landscapes, such as the Great Victoria Desert and the Simpson Desert. These arid regions are characterized by dry and infertile soils, sparse vegetation, and extreme temperatures. The deserts cover a significant portion of the continent's interior, contributing to the unique and rugged beauty of the Australian Outback.
While deserts and plains dominate, Australia also features some mountainous areas. The Australian Alps and the Great Dividing Range are notable mountain ranges, but they do not encompass as much of the continent's land area as the deserts and plains. These mountainous regions provide scenic landscapes, including snow-capped peaks and alpine ecosystems.
Forests and wetlands, although present, are not as widespread as the arid landscapes. Australia is known for its unique flora and fauna, and some forested areas exist, such as the Daintree Rainforest in Queensland and the Tarkine Forests in Tasmania. Wetlands, including coastal mangroves and inland marshes, also contribute to the country's ecological diversity but are not as dominant as the deserts and plains.
Overall, the arid nature of Australia's deserts and the vastness of its plains make them the prominent landforms that shape the continent's geography and natural environment.
Learn more about vegetation, brainly.com/question/32345459
#SPJ11
what environment would you be most likely to find high grade metamorphic rocks
High grade metamorphic rocks are typically found in environments that have undergone intense heat and pressure. These rocks form deep within the Earth's crust or in areas of high tectonic activity where the rock is subjected to extreme forces.
These conditions cause the rock to recrystallize and transform into new mineral structures, resulting in the formation of high grade metamorphic rocks such as gneiss, schist, and migmatite.
One environment where high grade metamorphic rocks can be found is in mountain ranges, particularly in areas of subduction zones where tectonic plates collide. This collision causes intense pressure and heat to build up, resulting in the formation of high grade metamorphic rocks. Another environment where high grade metamorphic rocks can be found is in areas of deep continental crust, where the rocks are exposed to extreme heat and pressure from the Earth's internal forces.
Overall, high grade metamorphic rocks are rare and are only found in specific environments where the geological conditions are ideal for their formation.
Learn more about metamorphic rocks here:
https://brainly.com/question/25155804
#SPJ11
By volume, what is the most common cation in all non-organic gemstones?1) Iron or Aluminum: they are equally common.2) Aluminum3) Beryllium4) Oxygen5) Silicon
The most common cation in all non-organic gemstones is (2) aluminum. This is because aluminum is the third most abundant element in the Earth's crust, after oxygen and silicon.
In fact, many gemstones are formed from minerals that contain aluminum, such as beryl, corundum, and garnet. Aluminum is also a common component in the formation of other minerals, such as feldspar, which can also be used as gemstones. So, while other cations such as iron may be present in some gemstones, aluminum is by far the most common. It's worth noting, however, that organic gemstones, such as pearls and amber, do not contain aluminum or any other cation, as they are composed of organic material rather than minerals. In conclusion, the most common cation in non-organic gemstones is aluminum due to its abundance in the Earth's crust and its prevalence in many gem-forming minerals.
To know more about gemstones visit:
https://brainly.com/question/31603341
#SPJ11