Nonsense mutations are those point mutations in the DNA where stop codons will appear before the time they should appear.
What are nonsense mutations?At the time of transcribing from DNA to RNA, the template needs to have both start and stop codons for the transcription to occur correctly, but sometimes mutations can occur that do not allow the protein to be produced correctly. This mutation can be permanent which causes damage to the formation of proteins.Sometimes mutations can be beneficial, allowing evolution and helping organisms to be better formed for a new environment.
It is the type of mutation in which a termination codon occurs before the time it should be, instead of giving a codon with a certain amino acid. Which gives a much shorter protein than it should be, giving a non-functional protein.
To learn more about mutation visit: https://brainly.com/question/17130462
#SPJ1
Turn your head _______ and right and glance over your shoulder to view what cannot be seen in the side-view mirrors. back down left up Submit answer
Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.
What is mirror ?
An item that reflects an image is a mirror or looking glass. When focused through the lens of the eye or a camera, light that reflects off a mirror will reveal a picture of whatever is in front of it. Mirrors reflect light at an equal but opposite angle, which changes the direction of the image.
What is direction?
Direction can refer to a thing's course, the route one must take to get there in particular, the direction something is beginning to take shape, or the direction you are facing. Going straight instead than left is an example of direction.
Therefore, Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.
Learn more about mirrors from the given link.
https://brainly.com/question/1126858
#SPJ4
Is the torque the product of force and lever arm?
Lever arm length and force applied perpendicular to a lever arm are multiplied to create torque. A scalar quantity called torque has two possible directions: clockwise and counterclockwise.
What is the force times the lever arm's product?A force applied perpendicular to a lever arm produces a torque, which is the result. The distance that runs perpendicularly from the pivot point, or the center of rotation, to the location where the force is delivered, is known as the lever arm or moment arm. A pivot point is always used to define a torque.
How do you multiply torque?Each gearing stage of a torque multiplier amplifies the torque applied to the bolt. For instance, a torque multiplier with a 5:1 ratio will produce an output at the shaft that is five times the torque, but because no energy can be produced, the speed will only be one fifth of the original.
To know more about torque visit:-
https://brainly.com/question/14970645
#SPJ4
A student heats 3.55 g of copper and 4.60 g of iodine for 6.25 g of a new compound. All of the iodine reacted, but there is some copper left over unused. How much copper is left?
The mass of copper that is left unreacted at the end of the chemical reaction is 1.90 g
What mass of copper is left unreacted at the end of the reaction?The mass of copper that is left untreated at the end of the chemical reaction is determined as follows:
Mass of copper before the reaction = 3.55 g
Mass of iodine before the reaction = 4.60 g
Mass of product = 6.25 g
According to the law of conservation of mass;
Mass of reactant = mass of product + mass of unreacted copper
Mass of reactants = 3.55 + 4.60
Mass of reactants = 8.15 g
The difference in the mass of the product obtained and the mass of the unreacted copper
Mass of unreacted copper = 8.15 g - 6.25 g
Mass of unreacted copper = 1.90 g
Learn more about the law of conservation of mass at: https://brainly.com/question/1992248
#SPJ1
The direction of the velocity of the planet is _______________________ (alwaysThe direction of the velocity of the planet is _______________________ (always, seldom, never) perpendicular to the net force acting upon the planet., seldom, never) perpendicular to the net force acting upon the planet.
According to the satellites' orbits and the speed at which they move, it either happens frequently or always.
As we begin to examine satellite orbits, we find that a circular orbit places the satellite always perpendicular to the object's net force and speed.
The orbit is stretched, just like in elliptical orbits. This informs us that the orbit has four points. As a result, the satellite rarely faces the satellite's net force in a perpendicular direction.
Rarely and always for elliptical orbits. According to the satellites' orbits and the speed at which they move, it either happens frequently or always.
Learn more about speed here-
https://brainly.com/question/28224010
#SPJ4
Define the following
a. Friction:
b.Sliding friction:
c.Static friction
d.Rolling friction
e.Air resistance
f. Terminal velocity
g.Gravity
h.Weight
i. Centripetal force:
j.Momentum
These are just personal definitions of the following. They aren't official ones that may come from your textbook, but they are still accurate.
a. Friction is a force that acts against forces in contact with an object.
b. Sliding Friction is a force that acts against the forces making an object slide (e.g. the y component of the object's weight force if it's on an incline)
c. Static Friction is a force that acts on an object that is still/not moving.
d. Rolling Friction is the force making an object roll.
e. Air resistance is a frictional force that acts to slow down a falling object.
f. Terminal velocity is the maximum an object can reach while in free fall due to air resistance.
g. Gravity is a mutual attractive force in between two objects.
h. Weight is the mass of an object multiplied by the gravitational force (usually 9.81 for objects on earth). Weight is a force acting against the normal force keeping objects from phasing through each other.
i. Centripetal force is a force that acts on an object that is turning. This force pulls the object to the outside of the turning track.
j. Momentum is defined by mv (mass times velocity). Momentum is not a force, it is the idea that the motion of an object can depend on its mass and velocity.
I would check official dictionaries, just to make sure these definitions align with your textbook's.
The 6 kg block is then released and accelerates to the right, toward the 5 kg block. The surface is rough and the coefficient of friction between each block and the surface is 0.3 . The two blocks collide, stick together, and move to the right. Remember that the spring is not attached to the 6 kg block. Find the speed of the 6 kg block just before it collides with the 5 kg
Assuming a 6 kg block is coupled to a spring with a 350 N/m spring constant, and that there is 0.5 m between the two blocks.
Solution:Use the formula
U=1/2kx2
U=1/23500.52
U=43.75 J
Utilizing the law of conservation of energy, KE = U - f.d, where f is the frictional force acting on
1/2 mv2 = 43.75 - mgd
1/2 ×6×v²= 43.75-0.3×6×9.8×0.5\s
v= √11.643
The spring constant is k, what is it?The "spring constant," denoted by the letter "k," is a figure that effectively indicates how "stiff" a spring is. A significant value of k indicates that more power is needed to extend it a given distance than would be necessary to stretch a less stiff spring the same distance.
To know more about spring constant visit:-
https://brainly.com/question/14670501
#SPJ4
What magnitude point charge (in C) creates a 16,000 N/C electric field at a distance of 0. 260 m?
C
How large (in N/C) is the field at 15. 0 m?
The magnitude of the point charge is 12.03 × 10⁻¹² C and the electric field at 15.0m is 4.63 × 10⁻² N/C.
A point charge creates a 16,000 N/C electric field at a distance equal to 0.260 m.
E = 16,000 N/C
r = 0.260 m
k = 8.99 × 10⁹
To calculate the point charge,
E = kq/r²
16000 = 8.99 × 10⁹ × q / (0.26)²
q = 16000 × 0.0676 / 8.99 × 10⁹
q = 10816 / 8.99 × 10⁹
q = 12.03 × 10⁻¹² C
When r= 15.0 m
E = kq/r²
E = 8.99 × 10⁹ × 12.03 × 10⁻¹² / (15)²
E = 0.4630 × 10⁻³
E = 4.63 × 10⁻² N/C
To know more about electric field here
https://brainly.com/question/14478005
#SPJ4
The sound that reaches the ears after bouncing off a wall or a floor is called _____.
(a) direct sound
(b) indirect sound
(c) virtual sound
(d) harmonics.
The correct option is B, the sound that reaches the ears after bouncing off a wall or a floor is called indirect sound.
Indirect sound is a type of sound that is not heard directly by the listener. Instead, it is heard through reflections of the original sound off of nearby surfaces. This sound is more muffled, as the reflections tend to lose some of the original sound's energy as it is reflected from wall to wall. Indirect sound is often used in recording studios and concert halls, as it can create a more natural or realistic sounding environment.
This is due to the fact that in real life, the sound is rarely heard directly by the listener, but rather bounces off of nearby surfaces. By using indirect sound, a more natural sound can be created for the listener. Indirect sound is also used in sound reinforcement systems, as it can help distribute sound more evenly throughout a space. This can help to create a more uniform sound.
To learn more about Indirect sound visit here:
brainly.com/question/28332693
#SPJ4
In which of the following situations is kinetic energy transformed into chemical energy by way of electrical energy?
A. wind turns the blades of a turbine on a wind generator, producing electricity that can be stored in a battery.
B. wood is burned in a steam engine to drive an electrical generator that in turn provides energy for a motor.
C. charge separation caused by motion and friction among clouds produces lightning, which strikes a tree, setting it on fire.
D. the electric current from a battery is used to separate water molecules into their elemental oxygen and hydrogen components.
The situations is kinetic energy transformed into chemical energy by way of electrical energy is- wind turns the blades of a turbine on a wind generator, producing electricity that can be stored in a battery.
Hence, option A is correct.
Wind turbines convert wind's mechanical energy into electrical energy. In this scenario, a turbine uses the kinetic energy of moving air to create a rotating motion. Wind causes a wind turbine's blades to move or rotate as it blows past them. An engine is powered by these blades.An object's kinetic energy is the energy it has as a result of motion. Applying force is necessary if we wish to accelerate an object. After the job is finished, the object will be travelling at a new, constant speed because energy has been transferred to itTo know more about kinetic energy here
https://brainly.com/question/25959744
#SPJ4
a ball is thrown vertically upwards. After resistance is negligible. What is the variation with tiem fo t of the kinetic energy E_k of hte ball
The variation with time of the kinetic energy E_k of the ball is that it decreases. This is because gravity is acting against the ball and slowing it down, so the kinetic energy is decreasing as the ball slows down.
When the ball is released, the initial kinetic energy, E_k, is given by the equation: E_k = mgh, where m is the mass of the ball, g is the gravitational acceleration, and h is the initial height of the ball. As the ball rises, its height increases, and the potential energy, U, increases. However, this increase in potential energy is at the expense of kinetic energy, so the kinetic energy decreases as the ball rises.
When the ball reaches its maximum height, its kinetic energy is zero as it is at rest. As the ball then begins to fall, its potential energy decreases, and its kinetic energy increases. This is because the ball is falling under the action of gravity, and thus its kinetic energy increases as it accelerates downwards. Overall, the kinetic energy of the ball decreases as it rises and increases as it falls.
This is due to the conservation of energy, which states that the total energy of a system remains constant. As the potential energy increases, the kinetic energy decreases, and vice versa.
To know more about kinetic energy refer to the link brainly.com/question/26472013
#SPJ4
Which of the following statements is probably true about the very first stars in the universe?
a. They were made only from hydrogen and helium.
b. H2
c. True
d. More massive than a hundred times the Sun
The correct statement about the very first stars in the universe is that they were made only from hydrogen and helium.
What is universe?
The universe is the totality of existence, encompassing all matter, energy, space, and time, and the physical laws and constants that govern them. It is the sum total of all that exists, was, and will be, including all galaxies, planets, stars, and phenomena such as light, gravity, and electromagnetic radiation. The universe is believed to have originated with a massive explosion known as the Big Bang, estimated to have occurred around 13.8 billion years ago. Since then, the universe has been expanding outward, ever increasing in size, complexity, and energy density. Scientists believe that the universe is composed of a vast array of components, including dark matter, dark energy, and dark radiation.
To learn more about universe
https://brainly.com/question/15324953
#SPJ4
How does a simmering pot of spaghetti sauce illustrate convection currents
Answer:
1: As the substance’s thermal energy increases, the kinetic energy of its particles increases, and vice versa.
2: Its molecules move around more quickly, so there is more space between them, making it less dense than the air above it.
3: Warmer sauce at the bottom of the pot is less dense, so it rises, forcing cooler sauce down, where it is warmed.
4: Hot soup warms the bowl where it sits.
5: transfer of thermal energy through infrared waves
Explanation:
This is correct for the Thermal Energy Transfer Quick Check
A simmering pot of spaghetti sauce provides an excellent illustration of convection currents because the process of heating the sauce causes hot molecules to rise and cool molecules to sink. This creates a circular motion known as a convection current.
When the pot is placed on a hot stove, the heat from the burner is transferred to the bottom of the pot, which in turn heats the sauce. As the sauce heats up, the molecules nearest to the heat source become hotter and lighter. These hot, lighter molecules rise to the top of the pot, creating a convection current. As they reach the surface, they cool down, become heavier, and then sink back down to the bottom of the pot.
This process of hot molecules rising and cool molecules sinking creates a circular motion that evenly distributes the heat throughout the sauce, ensuring that it cooks evenly. The convection currents in the pot are also responsible for the bubbles that rise to the surface of the sauce, releasing trapped steam and preventing the pot from boiling over.
In conclusion, a simmering pot of spaghetti sauce illustrates convection currents because it shows how hot molecules rise and cool molecules sink, creating a circular motion that evenly distributes heat and ensures that the sauce cooks evenly.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ2
1. When the current I is positive, the capacitor charge Q isdecreasing.
2. When the current I is positive, the measured VOLTAGE IN 2 willbe negative.
3. When the capacitor charge Q is positive, the measured VOLTAGE IN1 is positive.
4. The capacitor charge Q exponentially decays to zero when the RELAY is thrown to position N.O.
5. The transient currents that flow in this experiment decay exponentially to zero
1. The capacitor charge Q is decreasing while the current I is positive is false
2. If the measured voltage in 2 is negative when the current I is positive, it is false.
3. When the measured VOLTAGE IN1 is positive, the capacitor charge Q is positive, which is True.
4. When the RELAY is thrown to the position N.O is False, the capacitor charge Q rapidly decays to zero.
5. This experiment's transient currents flow exponentially decrease to zero, which is false
A capacitor is a type of electric device that can charge and store electrical energy when a voltage is applied to its terminals.
Formulas link the applied voltage to the capacitor's charge Q and currents I.
The final formula shows that while the current is positive, the capacitor's voltage is positive (increasing) and the
Q=CV
I=dQ/dt=C(dQ/dt)
The charge is rising.
As a result, the question's assertion is false.
As the currect is flowing from VOLTAGE IN 2 to VOLTAGE IN 1 it will be positive.
As a result, the question's assertion is false.
The measured VOLTAGE IN1 is positive when the capacitor charge Q is positive.
As a result, the question's assertion is True.
The position of the relay is the N.O. position which stands for "normally opened", i.e. no current can flow through it.
As a result, the question's assertion is false.
The following formula provides the transient current flow in this experiment:
[tex]i=i_0e^{\frac{-t}{RC}}[/tex]
As a result, the question's assertion is false.
For such more question on capacitor charge.
https://brainly.com/question/27393410
#SPJ4
Note: The diagram of the question is added bellow,
By using moving _____magnetic fields_________ and _________________ wire together, electric ___________________ create electricity. Electric generators essentially convert _____________________energy (the energy of motion) into _____________ energy.
The words with a blank are , magnet, coiled copper, motor, mechanical and electrical. Electric generators produce electricity by combining a moving shaft with coiled wire.
How do magnetic fields work?The magnetic field is the region where the strength of magnetism acts on a magnetic substance or a flowing electric charge. a magnetic field diagram that shows how the magnetic force is distributed both inside and outside of a magnetic substance.
Kinetic energy: What is it?When an object is moving, it has kinetic energy. If we intend to accelerate an object, we must exert a force. The task has been finished, energy has been applied to the object, and it is now moving at a fixed constant pace.
Therefore, electric generators generate electricity by combining coiled wire and moving shaft magnetic fields. Kinetic energy, or the energy of motion, is effectively transformed into electrical energy via electric generators.
To know more about magnetic field visit:
https://brainly.com/question/7802337
#SPJ4
suggest how the thermal conductivity of a metal depends on its temperature
Answer:
With an increase in temperature, the electrical conductivity of a pure metal decreases. This implies that the thermal conductivity of the pure metal shows little variance with an increase in temperature. However, a sharp decrease is observed when temperatures approach 0K
It has been suggested that rotating cylinders about 10 mi long and 5.0 mi in diameter be placed in space and used as colonies. What
The proposed size of 10 miles long and 5 miles in diameter for such a colony is quite large and would require significant technological advancements in terms of materials, and construction to be feasible.
What causes lift from a rotating cylinder?In general, a spinning cylinder produces lift when its top and bottom are subjected to higher pressure and quicker velocities, respectively. The lifting force, it was said, is pointed perpendicular to the cylinder velocity.
How do you calculate angular speed using radius and linear velocity?If r is an object's radius, v is its linear speed and is its angular velocity in radians per unit of time, then v = r. This formula connects these three values so that we can always determine the third if we know the first two.
to know more about rotating cylinders here:
brainly.com/question/13692334
#SPJ4
Which of the following is true?
O Two objects with the same speed always have the same velocity.
O The velocity of an object can change even if the speed of the object remains constant.
O Velocity describes how fast an object is changing speed.
O Velocity is independent of direction.
The velocity of an object can change even if the speed of the object remains constant.
How are starting and final velocities calculated?Initial velocity (u) squared plus two times the acceleration (a) times the displacement equals final velocity (v) squared (s). Final velocity (v) is equal to the square root of initial velocity (u) squared plus two times the acceleration (a) times displacement when v is the variable being solved for (s).
What distinguishes initial from final?In physics, an object's initial position is its starting point for motion, and its final position is where it comes to rest.
To know more about velocity visit:-
brainly.com/question/18084516
#SPJ1
Air conditioners not only cool air, but dry it as well. Suppose that a room in a home measures 5. 0m×9. 0m×2. 4m.
If the outdoor temperature is 30 ∘C and the vapor pressure of water in the air is 85 % of the vapor pressure of water at this temperature, what mass of water must be removed from the air each time the volume of air in the room is cycled through the air conditioner? The vapor pressure for water at 30 ∘C is 31. 8 torr
The volume of air in the room. The volume of the room is given by the product of its length, width, and height= 18.015 g/mol.
Calculation-Volume of air = 5.0 m × 9.0 m × 2.4 m = 108 m^3
Next, we need to find the number of moles of water vapor present in the air at 85% of the vapor pressure of water at 30°C.
The vapor pressure for water at 30°C is 31.8 torr. At 85% of this value, the vapor pressure of water in the air is:
Vapor pressure in air = 0.85 x 31.8 torr = 27.03 torr
We can use the Ideal Gas Law, PV = nRT, to find the number of moles of water vapor present in the air.
P = 27.03 torr
V = 108 m^3
R = 8.314 J/mol·K (The universal gas constant)
T = 303 K (Temperature in kelvins)
n = (PV) / (RT)
Find the mass of water that needs to be removed from the air each time the volume of air in the room is cycled through the air conditioner.mass of water = n * M(H2O)
Where M(H2O) is the molar mass of water which is 18.015 g/mol. It is important to note that this calculation assumes that air behaves as an ideal gas and that the temperature and pressure remain constant throughout the room. In reality, the temperature and pressure may vary throughout the room and the process of removing water vapor from the air can also affect the temperature and pressure.
to know more about vapor pressure here:
brainly.com/question/11864750
#SPJ4
In an 11v11 adult game, I see a defender challenge for the ball. The defender misses the ball and with their momentum they accidentally but careelessly trip the opponent. The ball rolls over the touchline. What is the restart
For the Direct free kick, the game restarted.
What does a soccer direct free kick entail?There are two different kinds of free kicks used in soccer: direct and indirect.The term "direct free kick" refers to a kick that can be used as a direct strike.Indirect free kicks require a second touch before the ball can be used as a shot at goal.
A direct penalty kick is what?If a player attacks an opponent in a way that the referee deems to be irresponsible, reckless, or employing excessive force, the referee will award a direct free kick.jumps, kicks, or makes an attempt to kick.
To know more about soccer visit:
https://brainly.com/question/15499943
#SPJ4
A sports car of mass m has the same kinetic energy as an SUV with a mass 3m as each is driven along the same road. Which vehicle, if either, has the largest momentum and what is the difference in their momenta, if any? Express your result as a percentage.
a. The car has about 42% greater momentum than the SUV.
b. The car has about 33% greater momentum than the SUV.
c. The SUV has about 73% greater momentum than the car.
d. Since their kinetic energies are the same, their momenta are the same. The difference is zero percent.
e. The SUV has about 66% greater momentum than the car
Option (a) is correct- The car has about 42% greater momentum than the SUV.
What is momentum ?
As a measure of an object's kinetic energy, momentum is easily defined. Simply put, momentum is the result of mass times velocity. full response Simply said, momentum is concerned with the quantity of motion. The conserved quantity is another definition for it.
What is mass?
Measurement of inertia, a fundamental characteristic of all matter. The resistance a body of matter offers to a change in its speed or location as a result of the application of a force is what it is in essence.
Therefore, Option (a) is correct- The car has about 42% greater momentum than the SUV.
Learn more about momentum from the given link.
https://brainly.com/question/402617
#SPJ4
Think of another topic in science that would lend itself to creating a word web. What is the main topic and list six subtopics you would include under it. You could use a whole subject area like chemistry or the desert. Pick a topic you know something about. Help me with this please
The study of computers and computing, encompassing the theoretical and algorithmic underpinnings, hardware and software, and applications for information processing, is known as computer science.
Uses and advantages:The study of algorithms and data structures, computer and network design, the modelling of data and information processes, and artificial intelligence are all included in the field of computer science. Since mathematics and engineering provide some of the underpinnings for computer science, it integrates concepts from those fields as well as queueing theory, probability and statistics, and electrical circuit design. As new algorithms, information structures, and computer architectures are conceptualised, designed, measured, and improved in computer science, extensive use of hypothesis testing and experimentation is also used.
Computer science is regarded as one of five distinct but related fields, including computer engineering, information systems, information technology, and software engineering. This family has come to be known collectively as the discipline of computing.
To learn more about computer science visit:
brainly.com/question/20837448
#SPJ4
A 14 N force to the right keeps a 72 N normal force mass at constant
velocity on a horizontal surface. What is the coefficient of kinetic friction
between the surface and the mass?
The coefficient of kinetic friction between the surface and the mass is 0.1944.
What is kinetic friction?A force that acts between moving surfaces is referred to as kinetic friction. A force acting in opposition to the direction of a moving body on the surface is felt. The two materials' coefficient of kinetic friction will determine how much force is applied.
The ratio of the normal force to the kinetic friction force generated by contacting surfaces is known as the coefficient of kinetic friction.
Hence, The coefficient of kinetic friction between the surface and the mass is = 14 N/72 N
= 0.1944
Learn more about kinetic friction here:
https://brainly.com/question/19180015
#SPJ1
What is the position of the particle at time t 0?
The position of the particle is zero because the velocity is zero for the particle. The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point and the position of the particle is zero because the velocity is zero for the particle.
Learn more about Velocity:
brainly.com/question/18084516
#SPJ4
Elliot is going to start strength training at home. He does not have any weights and is
brand new to strength training but is young and healthy. What would be a good
household object to use to for strength training? (1 point)
O a can of soup
O a box of tissues
O a gallon of water
O a paperback book
Answer:
A gallon of water would be a good household object to use for strength training.
Explanation:
Gallon jugs of water typically weigh around 8.3 lbs, which can provide a good amount of resistance for strength training exercises such as bicep curls, shoulder presses, and tricep dips. Additionally, the handle on the jug of water makes it easy to grip and use for various exercises. Cans of soup and boxes of tissues are generally too light to provide enough resistance for strength training, and a paperback book may not be sturdy enough to use for certain exercises.
A block of substance has a width of 4.9 cm, a length of 5.1 cm, and height of 1.9 cm . Its mass is 0.54 kg. Calculate the density of the substance.
The 4.7 g/cm3 is the density of the substance.
What is density ?
How tightly something is packed can be used to gauge a material's density. Formally, it is defined as the mass per unit of volume. Formula for Density or Density Symbol: D D = m/V, where m is mass and V is volume, stands for density.
What is mass ?
The most basic characteristic of matter, it is one of the fundamental quantities in physics. As a way to gauge how much matter is there in a body, we might use the term mass. Kilograms are the SI unit of mass (kg).
density = mass of sample/ volume of sample
mass = 1.5 kg = 1500 g
volume = W*L*H
Vol = 3.2*17.1*5.8 cm3 = 317.376 cm3
Now,
D = mass/V = 1500/317.376
D = 4.726255 g/cm3
=4.7 g/cm3
Therefore, 4.7 g/cm3 is the density of the substance.
Learn more about density from the given link.
https://brainly.com/question/1354972
#SPJ4
A car goes into a skid and comes to a gradual stop, accelerating at a constant rate to do so. At the midpoint of the skid, how much of its kinetic energy has the car lost (as a percentage, give % as the units)?
The percentage of the lost kinetic energy of the car, at the midpoint of the skid, is 50%.
In physics, work is the measurement of the energy used to move objects. When you are walking, you're using energy to move your body so the work done would be greater than zero.
According to work-energy theorem, work is equal to force times displacement (W = F · x).
A type of energy is kinetic energy, which is the energy of a moving object. If an object is at rest, its kinetic energy is zero. Kinetic energy is equal to one half of a mass times velocity squared (KE = 0.5 · m · v²).
When a car goes into a skid and comes to a gradual stop, at the midpoint of the skid the car has spend 50% its kinetic energy. This is simply because the velocity of the car at the midpoint of the skid is half the velocity of the car when the car starts going into a skid, assuming constant acceleration.
Learn more about kinetic energy at https://brainly.com/question/8101588.
#SPJ4
40 points!
What is the expected life span of a star with a low stellar mass, a relatively cool temperature, and dim relative brightness?
1 to 10 million years
10 to 100 million years
1,000 to 10,000 million years
10,000 to 200,000 million years
The expected life span of a star with a low stellar mass, a relatively cool temperature, and dim relative brightness is 10,000 to 200,000 million years and is therefore denoted as option D.
What is a Star?This is referred to as an astronomical object comprising a luminous spheroid of plasma held together by its gravity an d they are usually visible at night.
We should also note that stars with a high stellar mass burn burn their fuel at a much faster rate and can shine for just millions of years while on the other hand stars with a low stellar mass burn burn their fuel at a much slower rate and can shine for just billions of years.
This therefore means that the expected life span of a star with a low stellar mass and dim relative brightness will most likely be between 10,000 to 200,000 million years hence why option D was chosen.
Read more about Stars here https://brainly.com/question/21379923
#SPJ1
the electrical potential due to a dipole on its axis at a point p at a large distance x from the dipole is given by v
The electrical potential due to a dipole at a point P on its axis at a large distance x from the dipole is given by the formula: V = (p * x) / (4 * pi * epsilon_0 * x^2)
Where:
p is the dipole moment, a vector quantity that represents the magnitude and direction of the dipole. It is defined as the product of the magnitude of one of the charges (q) and the distance between the charges (d), p = q*d.x is the distance from the dipole to point P, it is a scalar quantity.epsilon_0 is the electric constant or vacuum permittivity, it is a scalar quantity that relates the electric flux density to the electric field strength. Its value is approximately 8.85 x 10^-12 C^2/Nm^2.The equation assumes that point P is located on the axis of the dipole (the line connecting the two charges) and that the distance x is much larger than the size of the dipole. This means that the dipole can be considered as a point source of electric potential and the field at point P is well approximated by the field of a point charge.It's important to note that the formula gives the potential at point P due to the dipole, however, the dipole itself also has an electric field which can be found by taking the gradient of the potential.Learn more about the electrical potential here:
https://brainly.com/question/14306881
#SPJ4
ANALOGY: Natural pressure is to artesian wells as mechanical pressure is to ___________________
Water flows naturally under pressure from an artesian well without the need for pumping.
What causes pressure in an artesian well?A well that can bring water to the surface without a pump is known as an artesian well. This happens when the aquifer's positive pressure is high enough to force the water to the surface. This positive pressure is brought on by the confinement of an artesian aquifer between impermeable rocks or clay.
Free-flowing spring water that springs from underground wells is known as artesian water. Water in artesian wells rises to the surface naturally owing to pressure, unlike conventional wells that require a pump.
When water seeps into a porous rock material, such as limestone, sand, or gravel, artesian wells are created. Simply doing this wouldn't cause water to rise. But when a thick rock layer surrounds the porous earth.
To learn more about pressure refer to:
brainly.com/question/15079200
#SPJ4
What causes the tectonic plates to move?
Answer:
The heat from the radioactive processes within the planets inferior causes the plates to move sometimes away from each other. This movement is called the tectonic shift