Minor losses are a measurement of head loss in the system due to?
a) Friction loss in pipe fittings
b) Low flows
c) Measurement inaccuracies
d) Friction losses in the pipeline

Answer:

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas.

We are given:

P1 = 110 kPa

V1 = 2.00 L

T1 = 30.0°C = 303.15 K

We need to find V2, given:

P2 = 440 kPa

T2 = 80.0°C = 353.15 K

Substituting these values into the combined gas law equation, we get:

(110 kPa)(2.00 L)/(303.15 K) = (440 kPa)(V2)/(353.15 K)

Solving for V2, we get:

V2 = (110 kPa)(2.00 L)(353.15 K)/(303.15 K)(440 kPa) = 1.55 L

Therefore, the new volume of the gas is 1.55 L.

Answer:

It is infrared radiation that produce the warm feeling on our bodies.

Explanation:

Hope this helps ! =D

Brainliest please! =D

To solve this problem, we need to use the formula for calculating the Ka of a weak acid: Ka = [H+][A-]/[HA].

where [H+] is the concentration of hydrogen ions (protons), [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid. We are given the pH of the solution, which is 2.67. We know that pH = -log[H+], so we can find the concentration of hydrogen ions: [H+] = 10^(-pH) = 10^(-2.67) = 0.00200 M.

Since this is a weak acid, we can assume that most of the acid is in the form of HA, and only a small fraction has dissociated into H+ and A-. Therefore, we can assume that the concentration of HA is approximately equal to the initial concentration of the acid, which is 0.250 M.

Now we need to find the concentration of A-. To do this, we use the fact that the acid is weak, which means that its dissociation is described by the equilibrium: HA ⇌ H+ + A-, The equilibrium constant for this reaction is Ka. At equilibrium, the concentrations of the reactants and products are related by the expression: Ka = [H+][A-]/[HA].

We know the values of Ka and [H+] (from the pH), and we have already estimated the value of [HA]. Therefore, we can solve for [A-]: Ka = [H+][A-]/[HA], Ka = (0.00200)(x)/(0.250 - x), where x is the concentration of A- at equilibrium (which we don't know yet). Solving for x, we get: x = 0.0087 M, Now we can calculate the value of Ka: Ka = [H+][A-]/[HA]
Ka = (0.00200)(0.0087)/(0.250 - 0.0087), Ka = 7.2 x 10^-5, Therefore, the value of Ka for the weak acid is 7.2 x 10^-5.

To know more about hydrogen click here

brainly.com/question/30037191

#SPJ11

find the value of Ka for the weak acid. To calculate the Ka value of a weak acid with a 0.250 M concentration and a pH of 2.67:

Step 1: Calculate the hydrogen ion concentration [H+] using the pH value.
pH = -log[H+]
2.67 = -log[H+]
[H+] = 10^(-2.67)

Step 2: Determine the concentration of the weak acid and its conjugate base.
Initial concentration of the weak acid (HA) = 0.250 M
Initial concentration of its conjugate base (A-) = 0
Since the weak acid partially dissociates, let x be the change in concentration:
HA ⇌ H+ + A-
0.250 - x    x     x

Step 3: Write the expression for Ka.
Ka = ([H+][A-]) / [HA]

Step 4: Use the equilibrium concentrations in the Ka expression.
Ka = (x)(x) / (0.250 - x)

Step 5: Since x is very small compared to 0.250, you can simplify the expression.
Ka ≈ (x^2) / 0.250

Step 6: Substitute the [H+] value obtained in Step 1 for x.
Ka ≈ (10^(-2.67))^2 / 0.250

Step 7: Calculate the Ka value.
Ka ≈ 2.189 × 10^(-5)

The value of Ka for the weak acid is approximately 2.189 × 10^(-5).

To know more about pH value of a week acids:

https://brainly.com/question/3191232

#SPJ11

Understanding the genetic basis of complex features and disorders requires the complete genome sequencing of an organism like C. elegans.

The sequencing of a genome sequence of the organism can help to find what organs and what part is performing which of the function of the body of the organism. For instance, scientists can locate genes linked to particular illnesses and create medications that specifically target these genes.

Additionally, they can research how specific genes and regulatory components function and create brand-new genetic engineering techniques to change them. Overall, sequencing a genome in its whole is a crucial step in better understanding biology.

To know more about genome sequencing, visit,

https://brainly.com/question/29598514

#SPJ4

The coldest phase of gas clouds is the molecular hydrogen phase, followed by the atomic hydrogen phase.

The warmest phase is the ionic hydrogen phase, which has the highest temperature due to the presence of charged particles. In terms of gas cloud phases consisting of hydrogen, you can rank them from coldest to warmest as follows:

1. Molecular hydrogen phase
2. Atomic hydrogen phase
3. Ionic hydrogen phase

Molecular hydrogen clouds are the coldest due to the presence of H2 molecules. Atomic hydrogen clouds are warmer with individual H atoms, and ionic hydrogen clouds are the warmest as they contain ionized H+ ions.

To know more about hydrogen click here

brainly.com/question/30037191

#SPJ11

Hydrogen gas cloud phases can be ranked from coldest to warmest as follows: molecular hydrogen, atomic hydrogen, and ionic hydrogen.

1. Molecular hydrogen phase: In this phase, hydrogen gas is in the form of H2 molecules. It is the coldest phase due to the low temperatures needed to maintain these stable molecules. Molecular hydrogen gas clouds are typically found in the interstellar medium and can have temperatures as low as 10-20 Kelvin.

2. Atomic hydrogen phase: In the atomic hydrogen phase, hydrogen gas exists as individual H atoms. The temperatures in this phase are higher than in the molecular phase but still relatively cool, ranging from about 100 to 1,000 Kelvin.

This phase is commonly found in the outer regions of galaxies where it forms a neutral hydrogen layer known as the "atomic hydrogen envelope."

3. Ionic hydrogen phase: This is the warmest phase, in which hydrogen gas is ionized, meaning the electrons are stripped from the hydrogen atoms, forming a plasma.

Temperatures in this phase can reach over 10,000 Kelvin. The ionic phase is prevalent in areas with high energy radiation, such as in the vicinity of young, hot stars or supernova remnants.

To know more about Hydrogen gas cloud phases refer here:

https://brainly.com/question/868510#

#SPJ11

The [[tex]OH^-[/tex]] of the resulting solution is C) [[tex]OH^-[/tex]]=0.020M.

The balanced chemical equation for the reaction between HBr and KOH is:

[tex]HBr + KOH[/tex] → [tex]KBr + H_2O[/tex]

From the balanced equation, we can see that one mole of KOH reacts with one mole of HBr to produce one mole of water and one mole of KBr.

First, we need to determine the number of moles of HBr and KOH in the solution:

moles of HBr = (0.10 M) x (0.040 L) = 0.0040 moles

moles of KOH = (0.10 M) x (0.060 L) = 0.0060 moles

Since KOH and HBr react in a 1:1 ratio, the number of moles of HBr that react with KOH is 0.0040 moles.

This means that there are 0.0060 - 0.0040 = 0.0020 moles of KOH remaining after the reaction.

The total volume of the solution is 40 mL + 60 mL = 100 mL = 0.100 L.

The concentration of [tex]OH^-[/tex] in the remaining KOH solution is:

[[tex]OH^-[/tex]] = moles of KOH remaining / total volume of the solution

[[tex]OH^-[/tex]] = 0.0020 moles / 0.100 L

[[tex]OH^-[/tex]] = 0.020 M

For more question on solution click on

https://brainly.com/question/25326161

#SPJ11

Hydrogen and oxygen can actually be separated from water using a little bit of electricity through a process called electrolysis.

During electrolysis, an electric current is passed through the water, causing the hydrogen and oxygen molecules to break apart and form bubbles. The hydrogen gas collects at the negative electrode (cathode), while the oxygen gas collects at the positive electrode (anode). This process can be used to produce pure hydrogen gas, which can be used as a fuel source in various applications.

Direct electric current (DC) is a tool used in chemistry and manufacturing to speed up non-spontaneous chemical reactions. As a step in the electrolytic cell-based separation of elements from naturally occuring sources like ores, electrolysis is crucial from a commercial standpoint. The decomposition potential is the voltage required for electrolysis to occur. In words, electrolysis would be "breakdown via electricity" because the word "lysis" implies to separate or break.

To know more about electrolysis click here:

https://brainly.com/question/12054569

#SPJ11

Answer: 0.00176 moles of gas present.

Explanation:

We can use the Ideal Gas Law to solve for the number of moles of gas present:

PV = nRT

where:

P = pressure (in atm)

V = volume (in L)

n = number of moles

R = ideal gas constant (0.08206 L·atm/mol·K)

T = temperature (in Kelvin)

First, we need to convert the temperature from Celsius to Kelvin:

T = 25ºC + 273.15 = 298.15K

Plugging in the given values, we get:

(3.81 atm) (0.044 L) = n (0.08206 L·atm/mol·K) (298.15 K)

Solving for n, we get:

n = (3.81 atm x 0.044 L) / (0.08206 L·atm/mol·K x 298.15 K)

n = 0.00176 mol

Therefore, there are 0.00176 moles of gas present.

Answer:

the pressure inside the container is 0.383 atm

1.945 x 10²⁴ molecules make up 3.23 moles.

In the case of sodium chloride, Sodium chloride, there are Avogadro's number of formula units for each mole of Sodium chloride (molecules). So, the number of Sodium chloride formula units (molecules) we need to determine is equal to the number of movements times all of the data we have is constant.

To convert from moles to molecules, you need to use Avogadro's number, which is 6.022 x 10²³ molecules per mole.

So, to convert 3.23 mol to molecules:

3.23 mol x 6.022 x 10²³ molecules/mol = 1.945 x 10²⁴ molecules.

To know more about molecules visit:-

https://brainly.com/question/15123235

#SPJ1

The name of each compound:

Ca(OH)₂ is called calcium hydroxide. This compound is commonly known as slaked lime or hydrated lime, and it is a white powder that is used in various applications, such as construction, agriculture, and water treatment.
KCl is called potassium chloride. This compound is a salt that is commonly used as a fertilizer, a food additive, and a medication. It is also used in some industrial processes, such as the production of soap and glass.
AlBr₃ is called aluminum bromide. This compound is a chemical that is used in various applications, such as catalysts for organic reactions and as a component in some types of batteries. It is also used in the production of certain types of polymers.
NaF is called sodium fluoride. This compound is a type of salt that is commonly used in toothpaste and other dental products to help prevent tooth decay. It is also used in some water fluoridation programs to improve dental health in populations. Additionally, sodium fluoride is used in some industrial processes, such as the production of aluminum.

Learn more about the compound at https://brainly.com/question/28872356

#SPJ11

Many nucleophilic addition reactions of aldehydes and ketones are catalyzed by acid or base. Acids catalyze hydration by facilitating the formation of a protonated carbonyl group.

which is more susceptible to nucleophilic attack. This results in the formation of an intermediate hemiacetal, which can then be further protonated and attacked by another nucleophile to form a fully substituted acetal. Overall, acid catalysis enhances the reactivity of the carbonyl group towards nucleophilic addition reactions.

Acids catalyze hydration by protonating the carbonyl oxygen, making it more electrophilic and susceptible to nucleophilic attack. This leads to the formation of a tetrahedral intermediate, which then undergoes proton transfer to generate the final hydrated product.

To know more about reaction click here

brainly.com/question/30564957

#SPJ11

The acid catalyst can be either a strong mineral acid, such as sulfuric acid or hydrochloric acid, or a weaker organic acid, such as acetic acid or formic acid.

Acids catalyze the nucleophilic addition reactions of aldehydes and ketones by donating a proton (H+) to the carbonyl oxygen, making it more electrophilic and enhancing the nucleophilic attack by the incoming nucleophile.

In the case of hydration, acid catalysis involves the addition of water to the carbonyl group of an aldehyde or ketone to form a hydrate, which is then converted back to the original carbonyl compound through deprotonation or elimination of water.

The acid catalyst provides a proton to the carbonyl oxygen, facilitating the nucleophilic attack by water and making the carbonyl carbon more electrophilic.

The overall reaction can be represented as:

RCHO + H2O → RCH(OH)OH

to know more about nucleophilic addition reactions refer here:

https://brainly.com/question/4699407#

#SPJ11

Answer: Your answer would be heat of combustion.

Explanation: When oxygen combines with another substance and gives off light and heat, this is called combustion.

The two different ions present in the compound Al(NO₃)₃ are Al³⁺ and NO₃⁻.

Generally, an ion is defined as an atom or group of atoms that has an electric charge. Basically, ions with a positive charge are called cations and ions with a negative charge are known as anions. Also, many normal substances exist in the body as ions.

Aluminium nitrate [Al(NO₃)₃] is a compound which is made up of two ions named as aluminium ion which is the cation and nitrate ion which is the anion. Basically, Aluminium nitrate is water soluble salt which is crystalline hydrate in nature.

The balanced chemical reaction is given as,

3 Al³⁺ + 3 NO₃⁻ → 3 Al(NO₃)₃

Learn more about ions from the link given below.

https://brainly.com/question/14982375

#SPJ4

The correct statements about Schrodinger's model of the atom are option A and B: The orbitals within a sublevel have the same energies, and the number of lobes of an orbital depends on these sublevels.

In order to explain the energies of electrons in atoms and information on the shape and orientations of the most likely distribution of electrons around the nucleus, a set of values obtained from the solution of the Schrodinger equation is used to construct an orbital.

Quantum numbers are the ones in question. Principle (n), azimuthal (l), and magnetic (m) quantum numbers are the three distinct sets of quantum numbers that make up an orbital. The fourth quantum number is known as spin quantum number (s) which usually denotes the orientation of an electron inside an orbital. The values for this quantum number can either be +1/2 or -1/2.

To know more about the Schrodinger's model, refer:

https://brainly.com/question/11032278

#SPJ4

Complete question is:

Select all the options that correctly describe the sublevel when referring to the Schrodinger's model of the atom.

A. The orbitals within a sublevel at a given principal energy level have the same energies. For example px has the same energy as py.

B. The number of lobes of an orbital depends on the sublevel of the orbital.

C. The relative energies of the sublevels s, p, d, and f are (lowest energy) f < d < p < s (highest energy).

D. The number of sublevels in each principal energy level is the same.

Factors Affecting the Germicidal Activity of Chemicals:

• Nature of the microorganisms being treated

• Nature of the material being treated

• Degree of contamination

• Time of exposure

• Concentration and chemical action of the germicide

The nature of the microorganisms being treated is an important factor in determining the effectiveness of a germicide. Different microorganisms have different structures and chemical compositions, which can affect how they are affected by germicidal chemicals.

The nature of the material being treated is also important, as some materials can be more difficult to penetrate and disinfect than others. Porous materials, for example, can be more difficult to disinfect than non-porous materials.

The degree of contamination is another important factor, as heavily contaminated surfaces or materials may require higher concentrations of germicide or longer exposure times to achieve effective disinfection.

The time of exposure is also critical, as most germicides require a certain amount of contact time to be effective. This can vary depending on the type of germicide and the concentration used.

Finally, the concentration and chemical action of the germicide are important factors in determining its effectiveness. Different germicides have different mechanisms of action, and some may be more effective against certain types of microorganisms than others.

The concentration of the germicide also plays a role, as higher concentrations may be required for effective disinfection.

For more question on Germicidal Activity click on

https://brainly.com/question/31440679

#SPJ11

The average atomic mass of silver is approximately 107.90 amu. The correct answer is option C.

To calculate the average atomic mass of silver, we will use the given isotope abundances and masses for 107Ag and 109Ag. The formula to find the average atomic mass is:

Average atomic mass = (fraction of isotope 1 × mass of isotope 1) + (fraction of isotope 2 × mass of isotope 2)

First, we'll convert the percentages to fractions:
107Ag: 51.84% = 0.5184
109Ag: 48.16% = 0.4816

Next, we'll plug the fractions and masses into the formula:
Average atomic mass = (0.5184 × 106.9051 amu) + (0.4816 × 108.9048 amu)
Average atomic mass = (55.4704 amu) + (52.4265 amu)
Average atomic mass = 107.8969 amu

The closest answer to our calculated value of 107.8969 amu is option C) 107.90 amu.

So, approximately 107.90 amu is the average atomic mass of silver.

For more such questions on atomic mass, click on:

https://brainly.com/question/30390726

#SPJ11

If your solid camphor product has a melting point slightly lower than you expect, you can conclude that the product may be impure or contain some contaminants.

The melting point of a substance is a physical property that can be used to determine its purity. Pure substances generally have a specific and well-defined melting point.

However, when impurities or contaminants are present, the melting point may be altered. In the case of your camphor product, a lower melting point indicates that there could be impurities mixed with the camphor, which are affecting its melting behavior.
A lower melting point than expected for your solid camphor product suggests that it might not be completely pure, and it likely contains some impurities or contaminants.

For more information on melting point of camphor kindly visit to

https://brainly.com/question/29690640

#SPJ11

A pair of valence electrons that are not shared between atoms are called unshared pairs.

These unshared pairs are also sometimes referred to as lone pairs or non-bonding pairs. They are important in determining the shape and properties of molecules, as they can influence the molecule's polarity and reactivity. For example, in a water molecule, the two unshared pairs of electrons on the oxygen atom give it a bent shape and make it a polar molecule. In organic chemistry, unshared pairs on nitrogen, oxygen, and sulfur atoms can participate in various reactions such as nucleophilic substitution and acid-base reactions. Covalent bonds involve the sharing of electrons between atoms, but unshared pairs remain associated with a single atom and contribute to the stability of the electron arrangement in that atom.

To know more about unshared pairs, please click on:

https://brainly.com/question/18651326

#SPJ11

To make a single molecule of glucose, 6 molecules of carbon dioxide must be added to RuBP (Ribulose-1,5-bisphosphate) during the process of photosynthesis.

The process of forming glucose in the chloroplast during photosynthesis is called the Calvin cycle. Ribulose-1,5-bisphosphate RuBP, is a five carboned ring, carbon dioxide is added to it to make a glucose molecule at the end of the photosynthesis.

These molecules are subsequently transformed into glucose through a series of further processes. Six molecules of carbon dioxide must be fixed to RuBP by the Calvin cycle in order to produce 12 molecules of 3-phosphoglycerate, which are then transformed into two molecules of glucose.

To know more about Glucose in photosynthesis, visit,

https://brainly.com/question/823571

#SPJ4

According to the question the pressure in the flask is 5,683 torr

Pressure is a type of force applied to an object perpendicular to its surface. It is measured in units such as pascals (Pa) or pounds per square inch (psi). Pressure is generated by the action of pushing or pulling on a surface. This can be done by a gas, liquid, or solid. Pressure can also be generated by the weight of the atmosphere or by the gravitational pull of a planet or other celestial body. Pressure affects the behavior of fluids, solids, and gases, and can be used in a variety of applications such as engineering, science, and manufacturing. Pressure is also important to understand when discussing thermodynamics and the behavior of materials under different conditions.

We can solve for P:
P = (nRT)/V
P = [(28.0 g N2)/(28.0 g/mol)] * (0.08206 L-atm/K-mol) * (305 K) / (4.50 L)
P = 7.48 atm
To convert atm to torr, we can multiply the result by 760 torr/atm:
P = 7.48 atm * 760 torr/atm
P = 5,683 torr

To learn more about pressure
https://brainly.com/question/29533322
#SPJ1

The number of moles of Al is 3.58 mol. So the correct option for this question is B) 3.58 mol.

To determine the number of moles of aluminum in 96.7 g of Al, we need to use the molar mass of aluminum. The molar mass of Al is 26.98 g/mol.

To calculate the number of moles of aluminum, we need to divide the given mass by the molar mass.

Therefore,

number of moles of Al = 96.7 g / 26.98 g/mol = 3.58 mol

So the correct option for this question is B) 3.58 mol.

It is important to remember that the molar mass of a substance represents the mass of one mole of that substance. Therefore, by knowing the mass of a substance, we can calculate the number of moles of that substance using its molar mass. This calculation is essential in stoichiometry problems and plays a crucial role in determining the number of reactants needed to produce a certain amount of products in a chemical reaction.

To learn more about Moles :

https://brainly.com/question/15356425

#SPJ11

To change the aldol condensation to form a benzalacetone, you need to perform a dehydration reaction.

This can be done by heating the aldol product, which is a beta-hydroxy ketone, in the presence of an acid catalyst such as sulfuric acid. The acid catalyst will protonate the hydroxyl group, making it a better leaving group. The beta-hydroxy ketone will then lose a molecule of water, forming a double bond between the alpha and beta carbons. This results in the formation of the desired product, benzalacetone. The mechanism of this reaction involves the formation of an enolate intermediate, which is stabilized by the aromatic ring of the benzaldehyde.

To know more about  aldol condensation, please click on:

https://brainly.com/question/9415260

#SPJ11

The average mass, in grams, of one Rb atom is 85.47. Hence, the correct option is D.

Generally the average atomic mass which is (sometimes called atomic weight) of an element is generally the weighted average mass of the atoms in a naturally occurring sample of the element. Basically, average masses are expressed in unified atomic mass units (u), where 1 u is equal to exactly one-twelfth the mass of a neutral atom of carbon-12.

Natural abundances of isotopes of Rb are as follows:

72.2 % of ⁸⁵Rb and 27.8 % of ⁸⁷Rb

Therefore, the average atomic mass of Rb is calculated as,

(0.722 × 85) + (0.278 × 87) = 85.47

Hence, option D is correct.

Learn more about average atomic mass from the link given below.

https://brainly.com/question/13753702

#SPJ4

Explanation:

CnH2n−2

is the formula for ____________.

The near-surface zone that is formed when water soaks into the ground and is held by molecular attraction as a surface film on soil particles is called the zone of saturation.

This zone is characterized by high soil moisture content and a high concentration of dissolved minerals, which are held in solution by the water molecules. The water in the zone of saturation is also important for sustaining plant growth and providing a habitat for a variety of microorganisms. The near-surface zone where water soaks into the ground and is held by molecular attraction as a surface film on soil particles is called the "zone of capillarity" or "capillary fringe." This zone occurs just above the water table, and the water is retained by the soil due to molecular forces and surface tension.

learn more about surface here.

https://brainly.com/question/15020755

#SPJ11

The pH after 30.0 ml of NaOH has been added is 2.18.

To find the pH after 30.0 ml of 0.175 M NaOH has been added to a 30.00 ml sample of 0.125 M HCOOH, you need to use the balanced chemical equation for the reaction between HCOOH and NaOH:

HCOOH + NaOH → NaCOOH + H2O

This equation shows that 1 mole of HCOOH reacts with 1 mole of NaOH, so the number of moles of NaOH added to the HCOOH solution is:

n(NaOH) = C(NaOH) x V(NaOH) = 0.175 mol/L x 0.0300 L = 0.00525 mol

Since the stoichiometry of the reaction is 1:1, this means that 0.00525 mol of HCOOH has been neutralized by the NaOH. The remaining amount of HCOOH is:

n(HCOOH) = C(HCOOH) x V(HCOOH) - n(NaOH) = 0.125 mol/L x 0.0300 L - 0.00525 mol = 0.00225 mol

Now you can use the Ka expression for HCOOH to find the concentration of H+ ions:

Ka = [H+][COO-]/[HCOOH] = 1.8 x 10^-4

[H+][0.00225]/[0.1225 - 0.00525] = 1.8 x 10^-4

[H+] = 0.00659 M

pH = -log[H+] = 2.18

To learn more about balanced chemical equation click here

brainly.com/question/15052184

#SPJ11

Water, or H2O, leaves and evaporates readily due to its molecular structure and its ability to form hydrogen bonds. The hydrogen bonds between water molecules are relatively weak, allowing water molecules to break free from the liquid phase and enter the gas phase.

Additionally, water has a relatively low boiling point, meaning that it can easily be converted into a gas at normal temperatures. The process of evaporation is also affected by factors such as temperature, humidity, and air flow. When these factors are favorable, water molecules are more likely to leave the liquid phase and enter the gas phase.

Evaporation plays an important role in the water cycle, as it helps to transfer water from the earth's surface back into the atmosphere. It also has important applications in fields such as food preservation and cooling technology. Overall, the ability of H2O to leave and evaporate readily is due to a combination of its molecular structure and external factors that affect the process of evaporation.

To learn more about, molecular

https://brainly.com/question/24191825

#SPJ11

The process for elements lithium through about iron is called nucleosynthesis, specifically stellar nucleosynthesis, where heavier elements are formed through fusion reactions in the cores of stars.

The process you're referring to, which involves the formation of elements lithium through iron from lighter elements like hydrogen and helium, is called nuclear fusion. This occurs in the core of stars, where lighter elements combine under high temperatures and pressures to form heavier elements, releasing energy in the process.

The process of creating new atomic nuclei—the protons and neutrons that make up an atom's center—is known as nucleosynthesis. Within a few minutes after the Big Bang, the process of nucleosynthesis began. At that time, a soup of quarks and gluons known as a quark-gluon plasma condensed into neutron and proton.

Visit here to learn more about  nucleosynthesis : https://brainly.com/question/29436977
#SPJ11

Total, 13.3 moles of NO₂ in the flask with a volume of 28L.

We can use the ideal gas law to determine how many moles of NO₂ are in the flask;

PV = nRT

where P will be the pressure, V will be the volume, n is number of moles, R is gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin;

T(K) = T(°C) + 273.15

T(K) = 45°C + 273.15

T(K) = 318.15 K

Next, we can put in the values we have;

n = (PV) / (RT)

n = (121 kPa × 28 L) / (8.314 J/(mol×K) × 318.15 K)

n ≈ 13.3 mol

To know more about ideal gas law here

https://brainly.com/question/4147359

#SPJ4