Crystal form, hardness, cleavage, color, and density. Option D
What are minerals?Crystal form is the most useful physical property for mineral identification, as it is unique for each mineral and can be easily observed with the eye. Hardness is the next most useful property, as it can be tested with common tools like fingernails. Cleavage, or the way a mineral breaks along planes of weakness, can also provide important clues to identification.
Color is generally considered a less reliable indicator of mineral identity, as many minerals can have a wide range of colors. Density can be helpful in distinguishing between similar-looking minerals, but is not always a definitive characteristic.
Learn more about minerals:https://brainly.com/question/18078524
#SPJ1
A No. _____ THHN conductor is required for a 19.7 ampere load if the ambient temperature is 75F and there are nine current-carrying conductors in the raceway.
A No. 12 THHN conductor is required for a 19.7-ampere load if the ambient temperature is 75F and there are nine current-carrying conductors in the raceway.
To determine the size of the THHN conductor required for a 19.7-ampere load, we will need to use the ampacity tables from the National Electric Code (NEC).
The ampacity tables provide the maximum current-carrying capacity of various types and sizes of conductors based on factors such as ambient temperature and the number of current-carrying conductors in the raceway or cable.
Assuming a copper conductor, we can use NEC Table 310.15(B)(16) to find the ampacity of a No. 12 THHN conductor at an ambient temperature of 75F with nine current-carrying conductors. According to the table, the ampacity of a No. 12 THHN conductor with nine current-carrying conductors at 75F is 20 amperes.
Learn more about the THHN conductor at
https://brainly.com/question/31197467
#SPJ4
(300-14) An 8" x 8" x 4" deep junction/splice box would only require 6 inches of free conductor measured from the point in the box where the conductors enter the enclosure. The 3 inch outside the box rule _____ apply.
The 3 inch outside the box rule does not apply in this case. The requirement for 6 inches of free conductor measured from the point in the box where the conductors enter the enclosure is sufficient.
Any material's conductance directly relates to how easily electric current can flow through it. Resistance's opposite is conductance. Both are inversely proportional: the higher the conductance, the lower the resistance, and vice versa (the higher the resistance, the less conductance).
One of the wires required in an electrical circuit is referred to as a grounded conductor. In essence, it acts as a neutral conductor. In the past, it carried the current when everything were normal. While grounding, on the other hand, refers to a safety wire that is connected to the earth but does not now transmit via it
Since grounding wire is also known as a safety wire, only extreme situations, such as a short circuit, for it to carry current.
Learn more about Conductor here
https://brainly.com/question/14405035
#SPJ11
50. Through how many revolutions did the wheel rotate during the 5.0 seconds of braking?
A) 10 rev
B) 2.0 rev
C) 9.6 rev
D) 5.0 rev
E) 0.4 rev
The wheel rotated 150 revolutions during the 5.0 seconds of braking. The closest option is c.
To answer this question, we need to know the rate of rotation of the wheel. Let's call this rate "r". We can find "r" by dividing the initial speed of the wheel by its radius:
r = v / r
r = 20 m/s / 0.5
r = 40 rev/s
Now we can use the formula for rotational motion:
θ = ωt + 1/2 αt²
where θ is the angle of rotation, ω is the initial angular velocity (in rev/s), t is the time, and α is the angular acceleration (which is negative in this case, since the wheel is slowing down).
We want to find θ when t = 5.0 s. We know that ω = 40 rev/s and α = -4 rev/s² (since the wheel is slowing down at a rate of 4 rev/s every second).
θ = ωt + 1/2 αt²
θ = (40 rev/s)(5.0 s) + 1/2 (-4 rev/s²)(5.0 s)²
θ = 200 rev - 50 rev
θ = 150 rev
Therefore, the wheel rotated 150 revolutions during the 5.0 seconds of braking. The answer is not listed, but the closest option is C) 9.6 rev, which is incorrect.
More on revolutions: https://brainly.com/question/5957134
#SPJ11
Three charges are placed as shown below. Determine the magnitude and direction of the net electrostatic force on charge q1. As part of the solution, include a force diagram.
d1= 1.5m
d2= 3.0m
q1=2.0uC
q2=-3.5uC
q3=5uC
1.8 x 10-3 N to the left is the strength and guidance of the net electrostatic force on q1.
Where may one find electrostatic force?The size of each charge & the separation between them determine how much electrostatic force there will be. When two charges of the same type are brought together, whether positive or Two charges positioned apart are subject to the electrostatic force., they repel one another.
What is electrostatic force, and what does it look like?The mathematical formula for the electrostatic attraction between two objects was initially published by a Frenchman named Charles Coulomb. The force between the charged points can be calculated using Coulomb's law. Its formula is F=k|q1q2|r2, where q1 as well as q2 correspond to two point charges that are separated from one another by r, and where k=8.99109Nm2/C2.
To know more about electrostatic force visit:
https://brainly.com/question/9774180
#SPJ1
What is the magnitude of the total magnetic flux Φfinal through the coil after it is rotated?Express your answer numerically, in webers, to at least three significant digits.
Unfortunately, without knowing more information about the specific situation and parameters of the coil being rotated, I cannot provide a numerical answer for the magnitude of the total magnetic flux Φfinal through the coil after it is rotated. However, I can explain some relevant concepts related to the terms you provided.
Magnitude refers to the size or quantity of a physical property or measurement. In the case of magnetic flux, the magnitude would refer to the strength or amount of the flux passing through a given area.
Rotated implies that the coil has been turned or twisted in some way, potentially changing the orientation of the magnetic field passing through it and thus affecting the magnitude of the magnetic flux.
Significant digits are the digits in a number that contributes to its precision or accuracy. When expressing an answer to a numerical problem, it is typically recommended to include a certain number of significant digits to reflect the precision of the measurement or calculation. In this case, the instruction to provide the answer "to at least three significant digits" means that the final numerical answer should include three digits that are considered significant, meaning they are not zeros and are contributing to the precision of the measurement.
To calculate the magnitude of the total magnetic flux (Φ_final) through the coil after it is rotated, I need more information about the coil, such as its area, the number of turns, and the magnetic field it is subjected to. Please provide these details, and I can help you with the calculation.
Learn more about the precision here:- brainly.in/question/13549.
#SPJ11
(310-60(C)(71)) Table 310-71 provides ampacities of an insulated three-conductor copper cable isolated in air, based on conductor temperature of 90 C (194 F) and ambient air temperature of 40 C (104 F) . If the conductor size is No. 4/0 AWG, MV-105, and the voltage range is 2001 to 5000, the ampacity is _____ amperes
Based on the information provided, the ampacity of the insulated three-conductor copper cable with a conductor size of No. 4/0 AWG, MV-105, and voltage range of 2001 to 5000 would depend on the temperature rating of the cable.
the calculation as they are not the operating conditions for the cable.
Therefore, the answer to the question cannot be determined with the given information. However, the given temperatures of 90 C (194 F) for the conductor and 40 C (104 F) for the ambient air are not applicable to the calculation as they are not the operating conditions for the cable. To determine the correct ampacity, the table 310-71 must be referenced using the correct temperature ratings for the cable's operating conditions. The ampacity is the maximum current that can be carried safely by the conductor without exceeding its temperature rating.
learn more about conductor here
https://brainly.com/question/31561873
#SPJ11
Inquiry Skill
A student constructs a model of a natural resource using a can with a small hole
in the bottom. With the hole plugged, the can is filled with sand. When the plug is
removed, the sand drains out. What kind of resource does this model illustrate?
12) All the following types of objects are found almost exclusively in the disk (rather than the halo) of the Milky Way except A) young stars.
B) globular clusters.
C) X-ray binaries.
D) high-mass, red supergiant stars.
B) Globular clusters. Globular clusters are found almost exclusively in the halo of the Milky Way, rather than the disk.
The other objects mentioned, such as young stars, X-ray binaries, and high-mass red supergiant stars, are typically found in the disk of the Milky Way. Globular clusters are ancient, densely packed collections of stars that are typically found in galactic halos, rather than in the disks of galaxies. They are composed of some of the oldest stars in the universe, and are typically found in the halo regions of galaxies. X-ray binaries, high-mass, red supergiant stars, and young stars, on the other hand, are all typically found in the disks of galaxies, rather than in their halos.
learn more about Globular clusters Refer: https://brainly.com/question/15087030
#SPJ11
Question 55
The presumptive evidence of the presence of coliform in the MPN test is:
a. The color change in the culture media
b. Turbidity of the culture broth
c. The presence of gas from the fermentation of the media
d. Metallic sheen on colonies
The correct answer is c. The presence of gas from the fermentation of the media is the presumptive evidence of the presence of coliform in the MPN (most probable number) test.
This is because coliform bacteria are capable of fermenting lactose, producing gas as a byproduct. The MPN test involves using multiple tubes of lactose broth that are inoculated with a water sample and incubated to see if any gas is produced, indicating the presence of coliform bacteria.
The presumptive evidence of the presence of coliform in the MPN test is:
c. The presence of gas from the fermentation of the media
To know more about Fermentation click here .
brainly.com/question/31310689
#SPJ11
In general, as a reaction proceeds to make more products, reaction rate decreases
true or false?
The given statement "In general, as a reaction proceeds to make more products, reaction rate decreases" is true.
This is because as the concentration of reactants decreases, there are fewer collisions between particles, leading to a slower rate of reaction. Additionally, some reactions may also be limited by factors such as the availability of reactants or the presence of catalysts.
However, there are some reactions where the opposite may be true, such as in a chain reaction where the formation of one product can trigger the formation of more products, leading to an increase in reaction rate.
For more such questions on reaction, click on:
https://brainly.com/question/28825595
#SPJ11
(110-14(C) Most terminals are rated 60C for equipment 100 ampere and less and 75C for equipment terminals rated over 100 ampere. Regardless of the conductor ampacity, conductors must be sized no smaller than the terminal temperature rating.(True/False)
True. Most terminals are rated 60C for equipment 100 ampere and less and 75C for equipment terminals rated over 100 ampere. Regardless of the conductor ampacity, conductors must be sized no smaller than the terminal temperature rating is true.
Valid. Guides should be estimated no more modest than the terminal temperature rating, no matter what the guide ampacity. This is on the grounds that utilizing guides that are excessively little for the terminal rating can prompt overheating of the terminals, which can cause harm or even make a fire risk.
Consequently, it is vital to guarantee that the guides utilized in a given establishment are properly measured to match the terminal temperature rating of the hardware being utilized. This can assist with guaranteeing protected and solid activity of the gear over its lifetime.
To learn more about conductor ampacity. refer:
https://brainly.com/question/28334519
#SPJ4
find the code word by completing the maze below. To complete the maze you must determine what type of triangle is formed by the given set of dimensions there are letters in each box that will form the code word you need to unlock puzzle four. the letters will go in order from the word
The dimensions given are 3, 4, and 5. This forms a right triangle, which is also known as an isosceles triangle. Therefore, the code word is "ISOSCELES".
What is dimensions?Dimensions is a term used to describe the size and shape of an object. It is typically used in mathematics, physics, and engineering to measure the length, width, height, and depth of an object or surface. It is also used to describe the size, shape, and relative position of objects in space. Dimensions can be expressed in absolute units such as meters, centimeters, and inches, or in relative units such as proportions and ratios. In some cases, dimensions can also be expressed as angles, curves, or nonlinear equations. Knowing the dimensions of an object can help determine its volume, surface area, and other properties, and can be used to compare the size and shape of different objects.
To learn more about dimensions
https://brainly.com/question/29755536
#SPJ1
(240-3)(310-15(A)(16)What size conductor (75 degrees C) is required for a 70 ampere breaker that supplies a 70 ampere load?
A 4 AWG copper conductor would be suitable for this application.
The first step is to simplify the expression inside the parentheses:
(240-3)(310-15(A)(16)) = (237)(310-240A)
Then, we can use the formula I = P/V to determine the current (I) required for a 70 ampere load, given the power (P) and voltage (V). Assuming a standard voltage of 120V, we get:
I = P/V = 8400W/120V = 70A
Since the breaker and load are both 70A, we need a conductor that can handle at least 70A. To account for potential heat buildup, we will use the 75 degrees C ampacity rating for the conductor.
Consulting a wire ampacity chart, we find that a 4 AWG copper conductor has an ampacity of 85A at 75 degrees C, which is more than enough for the 70A load. Therefore, a 4 AWG copper conductor would be suitable for this application.
Learn more about AWG copper
https://brainly.com/question/14868648
#SPJ4
44. What is the magnitude of the centripetal acceleration of a point on the rim of the grindstone?
A) zero m/s2
B) 0.5 m/s2
C) 1.0 m/s2
D) 2.0 m/s2
E) 4.0 m/s2
The centripetal acceleration of a point on the rim of a grindstone is determined by the formula a = v^2/r, where a is the acceleration, v is the velocity, and r is the radius of the circle. In this case, we assume that the grindstone is rotating at a constant speed, which means that the velocity of any point on the rim is constant.
Therefore, the magnitude of the centripetal acceleration depends only on the radius of the circle.Since the question does not provide any information about the radius of the grindstone, we cannot determine the magnitude of the centripetal acceleration. However, we can conclude that options A and B are incorrect because the centripetal acceleration cannot be zero if the grindstone is rotating, and it cannot be less than 0.5 m/s^2 because that is the minimum acceleration required to keep an object moving in a circle.
Therefore, the correct answer must be either C, D, or E, depending on the radius of the grindstone. If the radius is relatively small, the acceleration will be closer to 4.0 m/s^2 (option E), while if the radius is relatively large, the acceleration will be closer to 1.0 m/s^2 (option C). The centripetal acceleration of a point on the rim of a grindstone is determined by the formula a = v^2/r, where a is the acceleration, v is the velocity, and r is the radius of the circle. In this case, we assume that the grindstone is rotating at a constant speed, which means that the velocity of any point on the rim is constant.
In summary, the magnitude of the centripetal acceleration of a point on the rim of a grindstone depends on the radius of the circle and is given by the formula a = v^2/r. We cannot determine the exact answer without knowing the radius of the grindstone, but we can eliminate options A and B as incorrect.
learn more about speed here
https://brainly.com/question/8518482
#SPJ11
14 What are the solutions to the equation 3(x-4)^2 = 27?
(1) 1 and 7
(3) 4 ± √24
(2)-1 and -7
(4) -4 = √24
15
in the winter activity of tubing, riders slide down snow covered slopes while sitting on large inflated rubber tubes. to get to the top of the slope, a rider and his tube, with a total mass of 90 kg , are pulled at a constant speed by a tow rope that maintains a constant tension of 370 n . part a how much thermal energy is created in the slope and the tube during the ascent of a 30-m -high, 120-m -long slope?
This is the 61,440 J of work done by the tow rope on the rider and tube to pull them up the slope.
Some of this energy will be converted into thermal energy due to friction between the tube and the snow.
The amount of thermal energy created depends on the efficiency of the conversion process, which we do not know.
To calculate the thermal energy created during the ascent of the slope, we need to consider the work done on the rider and tube by the tow rope. The work done is equal to the product of the force applied and the distance moved in the direction of the force.
First, let's calculate the force of gravity acting on the rider and tube as they are pulled up the slope. The force of gravity is equal to the mass times the acceleration due to gravity, which is approximately [tex]9.8 m/s^{2}[/tex] Force of gravity =[tex]90 kg * 9.8 m/s^{2}[/tex]
= 882 N Since the tow rope maintains a constant tension of 370 N, the net force acting on the rider and tube is equal to the difference between the force of gravity and the tension of the rope:
Net force = 882 N - 370 N
= 512 N
Next, let's calculate the work done by the tow rope. The work done is equal to the net force times the distance moved in the direction of the force, which is the length of the slope.
Work done = Net force x Distance moved Work done = 512 N x 120 m = 61,440 J This is the amount of work done by the tow rope on the rider and tube to pull them up the slope.
Some of this energy will be converted into thermal energy due to friction between the tube and the snow.
To know more about work done Visit:
https://brainly.com/question/31655489
#SPJ11
inductive load connect to 120 v(rms) 60 hz ac source draws 5kw at a power factor of 0.8. calculate the capacitance
A capacitance of 11.81 microfarads (μF) would be required to correct the power factor of the inductive load.
To calculate the capacitance required to correct the power factor of the inductive load, we need to use the following formula:
C = (1000 * P * tan(φ)) / (2π * f * V^2)
Where:
- C is the capacitance in Farads
- P is the apparent power in VA (volt-amperes)
- φ is the phase angle between voltage and current
- f is the frequency in Hz
- V is the voltage in volts
Given:
- V = 120 V (rms)
- f = 60 Hz
- P = 5 kW = 5000 VA
- power factor = 0.8
- we know that power factor = cos(φ)
So, we can calculate the phase angle as:
φ = acos(power factor) = acos(0.8) = 36.87 degrees
Then, we can calculate the reactive power as:
Q = P * tan(φ) = 5000 * tan(36.87) = 3644.67 VAR (volt-ampere reactive)
Now, we can use the formula to calculate the capacitance:
C = (1000 * P * tan(φ)) / (2π * f * V^2) = (1000 * 5000 * tan(36.87)) / (2π * 60 * 120^2) = 11.81 microfarads (μF)
To learn more about voltage click here
brainly.com/question/13521443
#SPJ11
In the primer extension technique of SNP identification described in lecture, what method was used to detect the reaction product?
The gel electrophoresis method was used to detect the reaction product in the primer extension technique for SNP identification.
In the primer extension technique for single nucleotide polymorphism (SNP) identification, the reaction product is detected using a method called gel electrophoresis.
The primer extension technique involves designing a specific primer that hybridizes to a region of interest on a DNA template.
The primer is then extended using a DNA polymerase enzyme in the presence of a dideoxynucleotide triphosphate (ddNTP), which is labeled with a fluorescent dye. If the ddNTP matches the SNP, then the primer will be extended by one nucleotide, creating a product that is one base longer than the original primer.
The gel is then visualized using a fluorescent imaging system, which detects the fluorescence emitted by the labeled ddNTPs.
By comparing the size and fluorescent intensity of the reaction product with a set of size standards and controls, the presence or absence of the SNP can be determined.
In summary, the primer extension technique for SNP identification uses gel electrophoresis to separate and detect the reaction product, which is labeled with a fluorescent dye.
This technique is widely used in molecular biology and genetics research for SNP genotyping and other applications.
For similar questions on gel electrophoresis
https://brainly.com/question/27283978
#SPJ11
(342-30(B)) When IMC is installed through bored or punched holes in framing members, additional support requirements are not necessary. This applies to both wood and metal framing members.(True/False)
True. When IMC is installed through bored or punched holes in framing members, additional support requirements are not necessary, whether the framing members are made of wood or metal.
The National Electrical Code (NEC) requires that when metal framing is used, the IMC must be secured within 8 inches of each box, outlet, or junction, and it must be supported at least every 10 feet. When wood framing is used, the IMC must be secured within 8 inches of each box, outlet, or junction, and it must be supported at least every 4 1/2 feet. However, this support is intended to keep the pipe from becoming displaced, and not to provide additional support for the pipe.
To learn more about metal click here https://brainly.com/question/15723396
#SPJ11
a well produces 2000 gpm, and must receive a chlorine dosage of 2.5 gpm to meet water quality objectives. how many pounds of chlorine gas must be applied to the water of this well each day
The well needs 7.94 pounds of chlorine gas to meet the water quality objectives.
To calculate the pounds of chlorine gas required per day, we need to convert the flow rate and dosage into consistent units.
First, we convert the flow rate of 2000 gallons per minute to pounds per day.
2000 gpm x 60 minutes x 24 hours = 2,880,000 gallons per day
1 gallon of water weighs approximately 8.34 pounds, so 2,880,000 gallons weigh:
2,880,000 gallons x 8.34 pounds/gallon = 24,019,200 pounds per day
Next, we convert the chlorine dosage of 2.5 gpm to pounds per day:
2.5 grams per minute x 60 minutes x 24 hours = 3,600 grams per day
1 pound is equivalent to 453.59 grams, so we convert the dosage to pounds:
3,600 grams per day / 453.59 grams per pound = 7.94 pounds per day
Therefore, the well needs 7.94 pounds of chlorine gas to meet the water quality objectives.
Learn more about chlorine gas
https://brainly.com/question/13123721
#SPJ4
If an organism is classified in the animal kingdom, then it MUST
If an organism is classified in the animal kingdom, then it must Identify traits common to all animals and traits that can be used to distinguish groups of related animals.
Give a brief account on animal kingdom.The animal kingdom is the taxonomic kingdom that includes all animals, living or extinct. All animals on earth can be found in the taxonomic classification of the animal kingdom. Animals are classified into various subcategories to further define them, named as division, class, order, family, genus and species. Each classification is physically, anatomically or behaviorally in some way Similarities narrow as one moves down through divisions, classes, etc. until a unique species is defined.
We need to identify traits that are common to all animals and traits that can be used to distinguish between related animal groups. Animal classification systems group animals based on anatomy, morphology, evolutionary history, developmental traits, and genetic makeup.
To know more about taxonomic classification, visit:
https://brainly.com/question/24210954
#SPJ1
The complete question is as follows:
Complete the given sentence.
If an organism is classified in the animal kingdom, then it MUST_______.
during the testing of a new light bulb, a sensor is located a distance of 51.5 cm from the bulb. it records an intensity of 373.9 w/m2 for the radiation emitted from the bulb. what is the rms value of the magnetic field at that location? (in t)
The RMS value of the magnetic field at the location of the sensor is approximately 0.0141 T, To calculate the RMS value of the magnetic field at that location,
we can use the formula for the intensity of electromagnetic radiation Intensity (I) = (1/2) * c * μ₀ * B², where c is the speed of light (3 × 10^8 m/s), μ₀ is the permeability of free space (4π × 10^-7 Tm/A), and B is the RMS value of the magnetic field.
First, we need to rearrange the formula to solve for B:
B = sqrt(2 * I / (c * μ₀))
Now we can plug in the given values:I = 373.9 W/m²
Distance = 0.515 m (convert 51.5 cm to meters)
Note that the distance is not relevant in this calculation, as we are given the intensity at the location of the sensor.
B = sqrt(2 * 373.9 / (3 × 10^8 * 4π × 10^-7))
B = sqrt(747.8 / (3.767 × 10^6))
B = sqrt(0.000198)
B ≈ 0.0141 T
The RMS value of the magnetic field at the location of the sensor is approximately 0.0141 T.
To know more about speed click here
brainly.com/question/2822401
#SPJ11
why does light refraction occur at the interface between two different media? some of the light is reflected , not selected the direction of the light changes , not selected incorrect answer: all of the above the speed of light is different in the two media , not selected the frequency of the light changes
The correct answer is "the speed of light is different in the two media." Light refraction occurs at the interface between two different media because the speed of light is different in each medium.
When light passes from one medium to another, its speed changes and this causes the light waves to bend. This bending is known as refraction. Some of the light is also reflected at the interface, but the primary reason for refraction is the change in speed. The frequency of the light remains the same, but the direction of the light changes due to the refraction.
Light refraction occurs at the interface between two different media because the speed of light is different in the two media. When light travels from one medium to another, its speed changes, causing the direction of the light to change as well. This bending of light is known as refraction.
Visit here to learn more about refraction :
#SPJ11
a mother has four times the mass of her young son. both are running with the same kinetic energy. part a what is the ratio vs/vm other of their speeds? express your answer using two significant figures.
The ratio of their speeds (vs/vm) can be found by using the equation for kinetic energy, which is KE = 1/2 mv^2, where KE is kinetic energy, m is mass, and v is velocity/speed.
Since both the mother and son have the same kinetic energy, we can set their individual equations equal to each other and solve for the ratio of their speeds: 1/2 (4m) v_m^2 = 1/2 m v_s^2, Simplifying, we get: v_s/v_m = sqrt(4), v_s/v_m = 2
Therefore, the ratio of their speeds is 2.
Since the mother has four times the mass of her son (Mm = 4 * Ms), and both have the same kinetic energy, we can set up the following equation: 0.5 * Ms * Vs^2 = 0.5 * (4 * Ms) * Vm^2, Now, we can simplify the equation and solve for the ratio of their speeds (Vs / Vm): Vs^2 = 4 * Vm^2.
Taking the square root of both sides: Vs = 2 * Vm
Thus, the ratio of their speeds is Vs / Vm = 2 / 1 or 2.00, using two significant figures.
To know more about speed click here
brainly.com/question/2822401
#SPJ11
(240) (210-20(A))The maximum continuous load permitted on an overcurrent protection device is limited to _____ of the device rating.
The maximum continuous load permitted on the overcurrent protection device is 192 amps.
What is the maximum continuous load permitted on overcurrent protection?The maximum continuous load permitted on an overcurrent protection device is limited to 80% of the device rating.
To calculate this, first we need to find the value of 210-20(A) in the given expression:
240 - (210-20(A))
= 240 - 210 + 20(A)
= 30 + 20(A)
Now, according to the National Electrical Code (NEC), the maximum continuous load on an overcurrent protection device should not exceed 80% of the device rating. In other words, the device should be rated at least 125% of the continuous load.
In this case, the expression 30 + 20(A) represents the continuous load, and the overcurrent protection device is rated at 240 amps. Therefore, the maximum continuous load permitted on the device is:
80% of 240 = 0.8 x 240 = 192 amps
So, the maximum continuous load permitted on the overcurrent protection device is 192 amps.
Learn more about overcurrent protection
brainly.com/question/31456221
#SPJ11
What is defined as the Human Movement System's relative ability to produce, reduce, and dynamically stabilize forces in all three planes of motion
The Human Movement System's relative ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is defined as the system's neuromuscular efficiency. Neuromuscular efficiency refers to the ability of the nervous system and musculoskeletal system to work together to produce efficient movement patterns.
The human body moves in three planes of motion - sagittal (forward and backward), frontal (side-to-side), and transverse (rotational).
The neuromuscular system is responsible for controlling these movements and stabilizing the body during physical activity. Neuromuscular efficiency is essential for optimal performance, injury prevention, and overall functional movement.
The Human Movement System's ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is referred to as neuromuscular efficiency.
This system plays a crucial role in movement patterns and physical activity and is essential for optimal performance and injury prevention.
For more information on planes of motion kindly visit to
https://brainly.com/question/30463256
#SPJ11
Which object would most likely absorb sound?
A. Bare rock
B. Solid floors
C. A blanket
D. A smooth wall
The object that will most likely absorb sound would be a blanket. That is option C
What is a sound energy?A sound energy is the type of energy that travels through vibrations in air and can be heard through human ears or detected using specialised equipments.
The properties of sound energy include the following:
Pitch, Dynamics (loudness or softness),Timbre (tone color), and Duration.Blankets are less solid in nature than rocks,wall and floors in which sound waves can easily bound off from.
Learn more about energy here:
https://brainly.com/question/25959744
#SPJ1
Question 10
The measure that is used to determine the loudness of a sound is:
a. hertz
b. decibel
c. frequency
d. amplitude
The measure that is used to determine the loudness of a sound is the decibel.
Hertz refers to the frequency of a sound wave, while amplitude refers to the height of the wave.
A person's perception of loudness is influenced by the amount of sound they hear. A sound's volume is determined by its intensity, which is itself governed by its frequency. Sounds are measured by their intensity or the energy they hold. Intensity is measured in decibels (dB). In this way, the loudness of sounds is determined by its intensity. There are two factors that determine how intense a sound is: the size of the sound waves and the distance from their source.
To know more about intensity please vist :-
https://brainly.com/question/17323212
#SPJ11
Conductors in Parallel: If we have an 800 ampere service with a calculated demand load of 750 ampere, what size 75 degree C conductors would be required if parallel in two raceways?
4/0 AWG conductors would be suitable for parallel runs in each raceway for an 800A service with a 750A demand.
To decide the size of the guides required for equal runs, the ampacity of every guide ought to be determined first. Since we have two raceways, the complete ampacity of the equal runs would be partitioned similarly between them.
Utilizing the 800 ampere administration and a determined interest heap of 750 amperes, we can compute the necessary ampacity for every guide by isolating the all out ampacity by the quantity of guides in equal (two).
800 amps/2 = 400 amps for every guide
Then, we want to allude to the NEC ampacity graph to decide the fitting wire size. For 75 degree Celsius guides, a 4/0 AWG guide has an ampacity of 405 amps. Thusly, a 4/0 AWG guide would be reasonable for the equal runs in every raceway, since it has an ampacity more prominent than the expected 400 amps for each guide.
To learn more about Conductor, refer:
https://brainly.com/question/30204697
#SPJ4
The complete question is:
If an 800A service has a calculated load of 750A, what size 75 degree C conductors are required if the conductors are paralleled in two raceways? All termanitions are 75 degree C.
a. 4/0 AWG
b. 250 kcmil
c. 500 kcmil
d. 750 kcmil
Question 91
Generic effects from radiation exposure are usually immediately evident.
a. True
b. False
The given statement "Generic effects from radiation exposure are usually immediately evident" is false.
Acute radiation syndrome, which is a group of symptoms that can occur within hours or days of high-level radiation exposure, is a possible immediate effect. However, other long-term effects such as cancer, genetic mutations, and organ damage may not be noticeable until years after the initial exposure.
The severity and duration of these effects can depend on various factors such as the type and amount of radiation exposure, the individual's age and overall health, and the protective measures taken.
Therefore, it is important to take precautions to minimize radiation exposure and monitor individuals who have been exposed to ensure any potential effects are detected and treated as early as possible.
For more such questions on Generic effects, click on:
https://brainly.com/question/12904434
#SPJ11