Need help ASAP
Thankss + BRAINLIST only for correct answer

The first three nonzero terms in the Taylor polynomial approximation to $y(t)$ are $t + \frac{1}{3}t^2 + O(t^3)$.

Using these initial conditions, we can write the first few terms of the Taylor polynomial approximation as:

\begin{align*}

y(t) &\approx y(0) + y'(0)t + \frac{y''(0)}{2!}t^2 \

&= t + \frac{1}{2}y''(0)t^2 \

&= t + \frac{1}{2}\left(\frac{6\cos(0)}{9\cdot 0 + 9}\right)t^2 \

&= t + \frac{1}{3}t^2

\end{align*}

Therefore, the first three nonzero terms in the Taylor polynomial approximation to $y(t)$ are $t + \frac{1}{3}t^2 + O(t^3)$.

To know more about Taylor polynomial  refer here:

https://brainly.com/question/31419648

#SPJ11

The mean of 3X is 6 and the variance of 3X is 36

Let X and Y be independent random variables with μX = 2, σX = 2, μY = 2, and σY = 3. To find the mean and variance of 3X, we can use the properties of linear transformations for means and variances.

The mean of 3X is found by multiplying the original mean of X (μX) by the scalar value (3):
Mean of 3X = 3 * μX = 3 * 2 = 6

The variance of 3X is found by squaring the scalar value (3) and then multiplying it by the original variance of X (σX²):
Variance of 3X = (3^2) * σX² = 9 * (2^2) = 9 * 4 = 36

To learn more about : mean

https://brainly.com/question/1136789

#SPJ11

1. Mean of 3X = 3 * μX = 3 * 2 = 6
2. Variance of 3X = (3^2) * σX^2 = 9 * (2^2) = 9 * 4 = 36

To find the mean and variance of 3X, we use the following properties:
Since X and Y are independent random variables with given means (μX and μY) and standard deviations (σX and σY), we can find the mean and variance of 3X.
Mean: E(aX) = aE(X)
Variance: Var(aX) = a^2Var(X)

Using these properties, we can find the mean and variance of 3X as follows:

Mean:
E(3X) = 3E(X) = 3(2) = 6
Therefore, the mean of 3X is 6.

Variance:
Var(3X) = (3^2)Var(X) = 9(2^2) = 36
Therefore, the variance of 3X is 36.

Learn more about Variance:

brainly.com/question/13708253

#SPJ11

The area of the parallelogram is 21 in².

Area is the region bounded by a plan shape.

To calculate the area of the parallelogram, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Learn more about area here: https://brainly.com/question/28470545

#SPJ1

Answer:

Step-by-step explanation:

The answer is choice B.

No matter what the equation for each angle,

they still add to 180°.  All interior angles of a triangle

add to 180°.

The second-degree Taylor polynomial for the function ()=63 at =0 is simply 63.

To find the Taylor polynomial 2() for the function ()=63 at =0, we need to use the formula for the nth-degree Taylor polynomial:
2() = f(0) + f'(0)() + (1/2!)f''(0)()^2 + (1/3!)f'''(0)()^3 + ... + (1/n!)f^(n)(0)()^n

Since we are only interested in the second-degree Taylor polynomial, we need to calculate f(0), f'(0), and f''(0):
f(0) = 63
f'(x) = 0 (the derivative of a constant function is always 0)
f''(x) = 0 (the second derivative of a constant function is always 0)

Substituting these values into the formula, we get:
2() = 63 + 0() + (1/2!)0()^2
2() = 63

Therefore, the second-degree Taylor polynomial for the function ()=63 at =0 is simply 63.

Know more about the Taylor polynomial here:

https://brainly.com/question/2533683

#SPJ11

The probability that it won't rain given that your algorithm predicted a rainy day is approximately 9.1%. The probability that it will rain given that your algorithm predicted a dry day is approximately 0.01%.

When the algorithm predicts rain, it has a 90% accuracy rate, meaning that it correctly predicts rain 90% of the time. However, since the overall probability of rain in city X is only 1%, most of the algorithm's rainy predictions will be false positives. Using conditional probability, we can calculate the probability of no rain given a rainy prediction as follows: (0.01 * 0.1) / (0.01 * 0.1 + 0.99 * 0.9) ≈ 0.0091 or 9.1%.

Conversely, when the algorithm predicts a dry day, it has a 99% accuracy rate, meaning that it correctly predicts no rain 99% of the time. Since the overall probability of rain is 1%, the algorithm's dry predictions will mostly be true negatives. Using conditional probability again, we can calculate the probability of rain given a dry prediction as follows: (0.99 * 0.01) / (0.99 * 0.01 + 0.01 * 0.9) ≈ 0.0001 or 0.01%.

Learn more about probability  

brainly.com/question/31828911

#SPJ11

The number of votes for each candidate would be:

Corrine Brown = 66,617

Bill Randall = 52,920

To determine the number of votes for each candidate, we will make some equations with the values given.

Equation 1 = CB + BR = 119,537

(BR + 13,696) + BR = 119,537

2BR + 13,696 = 119,537

Collect like terms

2BR = 119,537 - 13,696

2BR = 105841

Divide both sides by 2

BR = 52,920

This means that Corrine Brown received 52,920 +  13,696 =  66,617

Learn more about simultaneous equations here:

https://brainly.com/question/148035

#SPJ4

Complete Question:

In a recent election corrine brown received 13,696 more votes than bill Randall. If the total number of votes was 119,537, find the number of votes for each candidate

the mass moment of inertia about the x-axis is ixx = (2/7)[tex]mr^{2}[/tex] and about the y-axis is iyy = (1/7)[tex]mr^{2}[/tex] + (2/3)[tex]mh^{2}[/tex]

To find the mass moment of inertia, we consider the solid of revolution as a collection of infinitesimally thin disks or cylinders stacked together along the axis of revolution. Each disk or cylinder has a mass element dm.

For the mass moment of inertia about the x-axis (ixx), we integrate the contribution of each mass element along the axis of revolution:

ixx = ∫ [tex]r^{2}[/tex] dm

Since the solid is homogeneous, dm = ρ dV, where ρ is the density and dV is the volume element. For a solid of revolution, dV = πr^2 dh, where h is the height of the solid.

Substituting the expressions and performing the integration, we get:

ixx = ∫ [tex]r^{2}[/tex] ρπr^2 dh

= ρπ ∫ [tex]r^{4}[/tex] dh

= [tex](1/5)\beta \pi r^{4}[/tex] h

Since the solid is homogeneous, the mass m = [tex]\beta \pi r^{2}[/tex] h. Substituting this in the equation above, we get:

ixx = (1/5)m [tex]r^{2}[/tex]

Similarly, for the mass moment of inertia about the y-axis (iyy), we integrate along the radius r:

iyy = ∫[tex]r^{2}[/tex]  dm

= ∫ [tex]r^{2}[/tex] [tex]\beta \pi r^{2}[/tex] dh

= ρπ ∫ [tex]r^{4}[/tex] dh

= (1/5)[tex]\beta \pi r^{4}[/tex] h

Since the height of the solid is h, substituting [tex]\beta \pi r^{2}[/tex] h = m, we get:

iyy = (1/5)m [tex]r^{2}[/tex] + [tex](2/3)mh^{2}[/tex]

learn more about integration here:

https://brainly.com/question/31744185

#SPJ11

Answer:

Step-by-step explanation:

True. But there is a very high chance of not happening

The amount of golden delicious apples than red delicious apples that Mr. Myers picked would be 14 1/8.

The extra amount of golden delicious apples that Mr. Myers picked in comparison to the red delicious apples that Mr. Myers picked would be gotten by subtracting the amount of golden delicious apples from red delicious apples as follows:

27 2/8 - 13 1/8

= 14 1/8

So, the amount with which the number of golden delicious apples that Mr. Myers got was greater than the red delicious apples is 14 1/8

Learn more about fractions here:

https://brainly.com/question/17220365

#SPJ4

Complete Question:

Mr.Myers picked 13 1/8 bushels of red delicious apples and 27 2/8 bushels of golden delicious apples. How many bushels of golden delicious apples than of red delicious apples did he pick?

Suppose that in a random sample of size 200, standard deviation of the sampling distribution of the sample mean 0. 8. Researcher wanted to reduce the standard deviation to 0. 4. What sample size would be required?

The formula to calculate the standard error of the mean(SEM) is given by the ratio of the standard deviation and the square root of the sample size. Hence,SEM = SD/√nWhere,SD is the standard deviation of the sampling distribution of the sample mean is the sample sizeTherefore, to reduce the standard deviation to 0.4, the formula can be modified as follows:SEM = 0.4/√nSquaring both sides of the above equation and cross-multiplying, we get:0.16 = 0.8²/nSo, n = (0.8²/0.16) = 4. Hence, the sample size required to reduce the standard deviation to 0.4 is 400.

To know more about  standard deviation ,visit:

https://brainly.com/question/13498201

#SPJ11

To the nearest year, it will take 10 years for the population to reach 24,600.

Now, For this problem, we can use the formula for exponential growth:

P(t) = P₀  (1 + r)ⁿ

Where:

P(t) is the population after t years

P₀ is the initial population

r is the annual growth rate (as a decimal)

n is the number of years

Plugging in the values given:

P₀ = 15,000

r = 0.03

P(t) = 24,600

We can solve for n by dividing both sides by P0 and then taking the logarithm of both sides:

(1 + r)ⁿ = P(t) / P₀ t log(1 + r)

= log(P(t) / P0)

t = log(P(t) / P₀) / log(1 + r)

Plugging in the values given:

t = log(24,600 / 15,000) / log(1 + 0.03) t

t ≈ 10 years

Therefore, to the nearest year, it will take 10 years for the population to reach 24,600.

Learn more aboput the multiplication visit:

brainly.com/question/10873737

#SPJ1

Answer:

(x-y)^2 + (x^2+2xy+y^2) = 2x² + 2y²

Step-by-step explanation:

We have : (x-y)² + (x²+2xy+y²)

So :  ( x - y )( x - y ) + ( x² + 2 xy + y² )

So :  x ( x - y ) - y ( x - y ) + ( x² + 2 xy + y² )

So :  x² - xy - y ( x - y ) + ( x² + 2 xy + y² )

So :  2x² + 2y²

Please pick me as brailiest

The matrix[tex]A=\begin{bmatrix}14&3 &1 \\k&0 &0\end{bmatrix}[/tex]has three distinct real eigenvalues if and only if -16.33... < k < 4.33...,

To find the eigenvalues of a matrix A, we need to solve the characteristic equation det(A - λI) = 0, where I is the identity matrix and det denotes the determinant. For the matrix A given above, we have

det(A - λI) =[tex]\begin{vmatrix}14 - \lambda&3 &1 \\k&-\lambda &0\end{vmatrix}[/tex]

= (14 - λ)(-λ) - 3k = λ² - 14λ - 3k.

The roots of this quadratic equation are the eigenvalues of A, which are given by the formula

λ = (14 ± √(196 + 12k))/2.

For A to have three distinct real eigenvalues, we need the discriminant Δ = 196 + 12k to be positive and the two roots to be different. This implies that

196 + 12k > 0 and 14 - √(196 + 12k) ≠ 14 + √(196 + 12k).

Simplifying the second inequality, we get

√(196 + 12k) > 0, which is always true.

Therefore, the condition for A to have three distinct real eigenvalues is

-16.33... < k < 4.33...,

where the values -16.33... and 4.33... are obtained by solving the equation 14 - √(196 + 12k) = 14 + √(196 + 12k) and dividing the resulting equation by 2.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

Complete Question:

The matrix A = [tex]\begin{bmatrix} 14&3 &1 \\ k&0 &0 \end{bmatrix}[/tex] has three distinct real eigenvalues if and only if

____ < K < ____

The standard deviation of x can be  0.725.

The table describing the probability distribution of x is as follows

x P(X=x)

0 10/120

1 48/120

2 42/120

3 20/120

To find the probabilities, we can use the hypergeometric distribution formula:

P(X=x) = (C(4,x) * C(6,3-x)) / C(10,3)

where C(n,r) represents the number of combinations of n things taken r at a time.

The mean of x can be found using the formula:

E(X) = Σ(x * P(X=x))

= 0*(10/120) + 1*(48/120) + 2*(42/120) + 3*(20/120)

= 1.4

Know more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

Sampling error refers to the discrepancy between sample characteristics and population characteristics. It can be diminished by increasing the sample size, using random sampling techniques, and improving response rates.

A) Sampling error refers to the difference between the characteristics of a sample and the characteristics of the population from which it was drawn.

In other words, sampling error refers to the degree to which the sample statistics deviate from the population parameters.

B) Sampling error can be diminished by increasing the sample size, using random sampling techniques to ensure that the sample is representative of the population, and minimizing sources of bias in the sampling process.

C) Convenience sampling, snowball sampling, and judgmental sampling are all methods of non-probability sampling, which means that they do not involve random selection of participants.

As a result, these methods are more likely to yield sampling error than probability sampling methods.

Convenience sampling involves selecting participants who are readily available, which may not be representative of the population of interest.

Snowball sampling involves using referrals from existing participants, which may create biases in the sample.

Judgmental sampling involves selecting participants based on the researcher's judgment of who is most relevant to the study, which may not be representative of the population of interest.

To know more about method of sample selection refer here :

https://brainly.com/question/15604044#

#SPJ11

The both angles are 75 degrees.

When parallel lines are cut by a transversal line angles relationships are formed such as corresponding angles, alternate exterior angles, alternate interior angles, same side interior angles, vertically opposite angles etc.

Therefore, let's use the angle relationships to find the angles in the parallel lines as follows:

Hence,

15x = 12x + 15(alternate interior angles)

15x - 12x = 15

3x = 15

divide both sides by 3

x = 15 / 3

x = 5

Therefore,

15(5) = 75 degrees

learn more on angles here: brainly.com/question/23777548

#SPJ1

The given argument "K ⊃ Q / Q ⊃ ∼ K // K ≡ Q" is valid.

To determine the validity of the argument "K ⊃ Q / Q ⊃ ∼ K // K ≡ Q," we construct an ordinary truth table. The argument consists of two premises and a conclusion. The symbol "⊃" represents the conditional implication, "∼" represents negation, and "≡" represents equivalence.

We assign truth values (T or F) to the atomic propositions K and Q and evaluate the truth values of the premises and the conclusion based on the given argument. By systematically filling out the truth table, we can examine all possible combinations of truth values for K and Q.

After constructing the truth table, we observe that in every row where the premises K ⊃ Q and Q ⊃ ∼ K are true, the conclusion K ≡ Q is also true. Therefore, the argument is valid.

Learn more about argument

brainly.com/question/2645376

#SPJ11

Answer:

B, C

Step-by-step explanation:

A would round up to 5

B would round up to 4.9

C would round down to 4.9

D would round down to 5

E would round up to 5

Out of all these only B and C round to 4.9

Answer:

B and C

Step-by-step explanation:

A 4.95  --- this would round to 5.00.

B 4.87 - - - this would round to 4.9

C 4.93 - - - this would round to 4.9

D 5.04 - - - - this would round to 5.0

E 4.97 - - - this would round to 5.0

Step-by-step explanation:

the answer is 2k(2ucos)2usin(vi)

Three different ways to write [tex]5^{11}[/tex] as the product of two powers are:

[tex]5^{1} * 5^{10} \\\\5^{5} * 5^{6} \\\\5^{3} * 5^{8}[/tex]

To write the powers in different ways that all translate to 5 raised to the power of 11, we need to first recall that the product of the same bases is gotten by summing up the bases.

In this case, 1 times 10 is 1 plus 10 which is 11. The same applies for 5 and 6 and 3 and 8. So, the above are three ways to rewrite the expression.

Learn more about the power of products here:

https://brainly.com/question/28782029

#SPJ1

The y-intercept represents the area of the bed and room together when the length and width of the bed are both zero and the function is given by the relation A(x) = x² + 12x + 35

Given data ,

To find the standard form of the function A(x), we first expand the expression:

A(x) = (x + 5) (x + 7)

A(x) = x² + 7x + 5x + 35

A(x) = x² + 12x + 35

So the standard form of the function A(x) is:

A(x) = x² + 12x + 35

To find the y-intercept, we set x = 0 in the function:

A(0) = 0² + 12(0) + 35

A(0) = 35

So the y-intercept is 35. In the context of the problem, the y-intercept represents the area of the bed and room together when the length and width of the bed are both zero.

Hence , the function is solved

To learn more about function rule click :

https://brainly.com/question/3760195

#SPJ1

a. The probability that the individual purchased a small cup 24% and probability that the individual purchased a cup of decaf coffee is 20%

b.  If we learn that the selected individual purchased a small cup, the probability that he/she chose decaf coffee is  0.182.

c. If we know the individual purchased decaf, the probability that he/she chose a small cup is 0.5 or 50%.

d. The conditional probability of selecting a small cup given that decaf coffee was chosen is higher than the unconditional probability of selecting a small cup (24%).

(a) The probability that the individual purchased a small cup is 24% or 0.24. The probability that the individual purchased a cup of decaf coffee is 20% or 0.20.

(b) We need to find the conditional probability of choosing decaf given that the individual purchased a small cup. Let D denote the event that decaf coffee is chosen, and S denote the event that a small cup is chosen. Then, using Bayes' theorem, we have:

P(D|S) = P(S|D) * P(D) / P(S)

P(S) = P(S and R) + P(S and D) = 24% + 20% = 44%

P(D) = 20%

P(S|D) = 20% / 50% = 0.4

Therefore, P(D|S) = 0.20 * 0.4 / 0.44 = 0.1818 or approximately 0.182. This means that if we know the individual purchased a small cup, the probability that he/she chose decaf coffee is about 0.182. We can interpret this probability as the proportion of small cup purchases that are decaf.

(c) If we learn that the selected individual purchased decaf, we can find the conditional probability of choosing a small cup as follows:

P(S|D) = P(S and D) / P(D) = 10% / 20% = 0.5

This means that if we know the individual purchased decaf, the probability that he/she chose a small cup is 0.5 or 50%.

(d) The conditional probability of selecting a small cup given that decaf coffee was chosen is higher than the unconditional probability of selecting a small cup (24%). This is because the proportion of small cups among decaf coffee purchases (50%) is higher than the overall proportion of small cups (24%).

To learn more about Conditional Probability refer to:

brainly.com/question/27684587

#SPJ11

In the Heads or Tails game, the player pays 50 cents and chooses either heads or tails. After that, the player tosses a fair coin. If the coin matches the player's call, then the player wins a prize. if 100 players play the game, then we can expect that the students will raise $20.00 as the cost of prizes to be given to the winners.

Answer to part (a):

Probability of winning the game = 1/2

Probability of losing the game = 1/2

Expected number of players who would win = Number of players × Probability of winning

= 100 × 1/2= 50

Expected number of players who would lose = Number of players × Probability of losing

= 100 × 1/2= 50

Therefore, we can expect 50 players to win the game.

Answer to part (b):

The cost of each prize is 40 cents. The expected number of players who would win the game is 50.

Therefore, the total cost of prizes would be:

The total cost of prizes = Cost of each prize × Expected number of players who would win

= 40 × 50

= 2000 cents or $20.00

Therefore, if 100 players play the game, then we can expect that the students will raise $20.00 as the cost of prizes to be given to the winners.

To know more about Probability visit:

https://brainly.com/question/31828911

#SPJ11

A segment that connects two points on a circle is called a chord, which makes the option B correct.

In the context of circles, a chord refers to a line segment that connects two points on the circumference of the circle. It can also be defined as the longest possible segment that can be drawn between two points on a circle. Every chord in a circle creates two arcs, one on each side of the chord.

Note that diameter is a special type of chord that passes through the center of the circle. It is the longest possible chord in a circle, and it divides the circle into two congruent semicircles.

Therefore, a segment that connects two points on a circle is called a chord.

Read more about chord here:https://brainly.com/question/17023621

#SPJ1

Let's say we have a graph with four nodes: A, B, C, and D. The edges and their lengths are as follows:
- A to B: 3
- A to C: 1
- B to D: 2
- C to D: -5

Using this we can show that the Dijkstra's algorithm fails if negative edge lengths are allowed

If we use Dijkstra's algorithm to find the shortest path from A to D, we would start at A and initially assign a distance of 0 to it. We would then look at its neighbors, B and C, and update their distances accordingly (3 for B and 1 for C). We would then choose C as the next node to visit since it has the shortest distance so far. However, when we update the distance to D through C, we would get a distance of -4 (since -5 + 1 = -4).

This negative distance causes a problem because Dijkstra's algorithm assumes that all edge weights are non-negative. When we update the distance to D through C, it becomes shorter than the distance we assigned to it when we initially looked at it through B. This means that we would have to revisit D and potentially update its distance again, leading to an infinite loop.

Therefore, Dijkstra's algorithm fails if negative edge lengths are allowed.

To learn more about Dijkstra's algorithm visit : https://brainly.com/question/31309462

#SPJ11

In a right triangle where angle BAC is 90°, and given the lengths AB = 4.4 mm and CA = 4.7 mm, the length of BC, is approximately 6.3 mm which is found using the Pythagorean theorem.

In a right triangle, the Pythagorean theorem states that the square of the length of the hypotenuse (BC) is equal to the sum of the squares of the lengths of the other two sides (AB and CA).

Using the given values, AB = 4.4 mm and CA = 4.7 mm, we can apply the Pythagorean theorem to find BC. The equation is:

[tex]BC^{2}[/tex]= [tex]AB^{2}[/tex] + [tex]CA^{2}[/tex]

Substituting the values, we have:

[tex]BC^{2}[/tex]= [tex]4.4 mm^{2}[/tex] +[tex]4.7 mm^{2}[/tex]

[tex]BC^{2}[/tex] = 19.36 [tex]mm^{2}[/tex] + 21.81 [tex]mm^{2}[/tex]

[tex]BC^{2}[/tex] = 41.17 [tex]mm^{2}[/tex]

Taking the square root of both sides to solve for BC, we get:

BC ≈ √41.17 mm

BC ≈ 6.411 mm (rounded to three decimal places)

Rounding to one decimal place, the length of BC is approximately 6.3 mm.

Learn more about Pythagorean here:

https://brainly.com/question/28980259

#SPJ11

Answer:

ALL YOU HAVE TO DO IS LOOK AT THE NUMBER IN THE MIDDLE AND THE ONE AT THE LEFT AND PUT THEM TOGETHER FOR INSTENTSET

1 | 3

Is 13

Or

3 | 4

Is 34

And if you see

1 | 3, 4, 5

It stands for 13, 14, and 15

Statement b)  p-value is the probability to find the observed or more extreme value for the test statistic given that the null hypothesis is true.  is false.

The correct definition of the p-value is given in statement a), which states that the p-value is the probability of observing the test statistic or a more extreme value, assuming that the null hypothesis is true. In other words, the p-value measures the strength of evidence against the null hypothesis.

Statement c) is true. A high p-value for X2 suggests that there is insufficient evidence to reject the null hypothesis that X2 has no effect on the response variable.

Statement d) is generally true. A low p-value for X1 indicates that there is strong evidence to reject the null hypothesis that the coefficient for X1 is equal to zero, which suggests that X1 has a statistically significant effect on the response variable. However, it's important to note that statistical significance alone does not necessarily imply practical significance or causation.

To learn more about statistic visit:

brainly.com/question/31577270

#SPJ11